From 03e0b95d3f05f0399d0349b72f3cdea36a8ff9f5 Mon Sep 17 00:00:00 2001
From: Rich Bira <r.bira@fibaro.com>
Date: Mon, 24 Jul 2017 09:42:55 -0700
Subject: [PATCH] MSA-2127: Fibaro Door/ Window 2 is a new contact sensor that
 was released in Europe in June 2017 and will be released in the USA on August
 1st.

D/W 2 has integrated temperature sensor and we revised how parameters are adjusted.
---
 .../fibaro-door-window-sensor-2.groovy        | 462 ++++++++++++++++++
 1 file changed, 462 insertions(+)
 create mode 100644 devicetypes/fibargroup/fibaro-door-window-sensor-2.src/fibaro-door-window-sensor-2.groovy

diff --git a/devicetypes/fibargroup/fibaro-door-window-sensor-2.src/fibaro-door-window-sensor-2.groovy b/devicetypes/fibargroup/fibaro-door-window-sensor-2.src/fibaro-door-window-sensor-2.groovy
new file mode 100644
index 0000000..d5eab91
--- /dev/null
+++ b/devicetypes/fibargroup/fibaro-door-window-sensor-2.src/fibaro-door-window-sensor-2.groovy
@@ -0,0 +1,462 @@
+/**
+ *  Fibaro Door/Window Sensor 2
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *	  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Fibaro Door/Window Sensor 2", namespace: "Fibargroup", author: "Fibar Group S.A.") {	
+		capability "Contact Sensor"
+		capability "Tamper Alert"
+		capability "Temperature Measurement"
+		capability "Configuration"
+		capability "Battery"
+		capability "Sensor"
+		capability "Health Check"
+	
+		attribute "temperatureAlarm", "string"
+	
+		fingerprint mfr: "010F", prod: "0702"
+		fingerprint deviceId: "0x0701", inClusters:"0x5E,0x59,0x22,0x80,0x56,0x7A,0x73,0x98,0x31,0x85,0x70,0x5A,0x72,0x8E,0x71,0x86,0x84"
+		fingerprint deviceId: "0x0701", inClusters:"0x5E,0x59,0x22,0x80,0x56,0x7A,0x73,0x31,0x85,0x70,0x5A,0x72,0x8E,0x71,0x86,0x84"
+	}
+
+	tiles (scale: 2) {
+		multiAttributeTile(name:"FGDW", type:"lighting", width:6, height:4) {
+			tileAttribute("device.contact", key:"PRIMARY_CONTROL") {
+				attributeState("open", label:"open", icon:"st.contact.contact.open", backgroundColor:"#e86d13")
+				attributeState("closed", label:"closed", icon:"st.contact.contact.closed", backgroundColor:"#00a0dc")
+			}
+			tileAttribute("device.multiStatus", key:"SECONDARY_CONTROL") {
+				attributeState("multiStatus", label:'${currentValue}')
+			}
+		}
+		
+		valueTile("tamper", "device.tamper", inactiveLabel: false, width: 2, height: 2, decoration: "flat") {
+			state "tamper", label:'Tamper:\n ${currentValue}'
+		}
+		
+		valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
+			state "temperature", label:'${currentValue}°',
+			backgroundColors:[
+				[value: 31, color: "#153591"],
+				[value: 44, color: "#1e9cbb"],
+				[value: 59, color: "#90d2a7"],
+				[value: 74, color: "#44b621"],
+				[value: 84, color: "#f1d801"],
+				[value: 95, color: "#d04e00"],
+				[value: 96, color: "#bc2323"]
+			]
+		}
+		
+		valueTile("battery", "device.battery", inactiveLabel: false, width: 2, height: 2, decoration: "flat") {
+			state "battery", label:'${currentValue}%\n battery', unit:"%"
+		}	
+		
+		standardTile("temperatureAlarm", "device.temperatureAlarm", inactiveLabel: false, width: 2, height: 2, decoration: "flat") {
+			state "default", label: "No temp. alarm", backgroundColor:"#ffffff"
+			state "clear", label:'', backgroundColor:"#ffffff", icon: "st.alarm.temperature.normal"
+			state "underheat", label:'underheat', backgroundColor:"#1e9cbb", icon: "st.alarm.temperature.freeze"
+			state "overheat", label:'overheat', backgroundColor:"#d04e00", icon: "st.alarm.temperature.overheat"
+		}
+
+		main "FGDW"
+		details(["FGDW","tamper","temperature","battery","temperatureAlarm"])
+	}
+		
+	preferences {
+		
+ 		input (
+			title: "Fibaro Door/Window Sensor 2",
+			description: "Tap to view the manual.",
+			image: "http://manuals.fibaro.com/wp-content/uploads/2017/05/dws2.jpg",
+			url: "http://manuals.fibaro.com/content/manuals/en/FGDW-002/FGDW-002-EN-T-v1.0.pdf",
+			type: "href",
+			element: "href"
+		)
+		
+		input (
+			title: "Wake up interval",
+			description: "How often should your device automatically sync with the HUB. The lower the value, the shorter the battery life.\n0 or 1-18 (in hours)",
+			type: "paragraph",
+			element: "paragraph"
+		)
+		
+		input ( 
+			name: "wakeUpInterval", 
+			title: null, 
+			type: "number", 
+			range: "0..18", 
+			defaultValue: 6, 
+			required: false 
+		)
+		
+		parameterMap().findAll{(it.num as Integer) != 54}.each {
+			input (
+				title: "${it.num}. ${it.title}",
+				description: it.descr,
+				type: "paragraph",
+				element: "paragraph"
+			)
+			
+			input (
+				name: it.key,
+				title: null,
+				description: "Default: $it.def" ,
+				type: it.type,
+				options: it.options,
+				range: (it.min != null && it.max != null) ? "${it.min}..${it.max}" : null,
+				defaultValue: it.def,
+				required: false
+			)
+		}
+		
+		input ( name: "logging", title: "Logging", type: "boolean", required: false )
+	}
+}
+
+def updated() {
+	if ( state.lastUpdated && (now() - state.lastUpdated) < 500 ) return
+	logging("${device.displayName} - Executing updated()","info")
+
+	if ( settings.temperatureHigh as Integer == 0 && settings.temperatureLow as Integer == 0 ) { 
+		sendEvent(name: "temperatureAlarm", value: null, displayed: false) 
+	} else if ( settings.temperatureHigh != null || settings.temperatureHigh != null ) {
+		sendEvent(name: "temperatureAlarm", value: "clear", displayed: false) 
+	}
+	
+	syncStart()
+	state.lastUpdated = now()
+}
+
+def configure() {
+	def cmds = []
+	cmds << zwave.batteryV1.batteryGet()
+	cmds << zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 1)
+	encapSequence(cmds,1000)
+}
+
+private syncStart() {
+	boolean syncNeeded = false
+	Integer settingValue = null
+	parameterMap().each {
+		if(settings."$it.key" != null || it.num == 54) {
+			if (state."$it.key" == null) { state."$it.key" = [value: null, state: "synced"] } 
+			if ( (it.num as Integer) == 54 ) { 
+				settingValue = (((settings."temperatureHigh" as Integer) == 0) ? 0 : 1) + (((settings."temperatureLow" as Integer) == 0) ? 0 : 2)
+			} else if ( (it.num as Integer) in [55,56] ) { 
+				settingValue = (((settings."$it.key" as Integer) == 0) ? state."$it.key".value : settings."$it.key") as Integer
+			} else {
+				settingValue = settings."$it.key" as Integer
+			}
+			if (state."$it.key".value != settingValue || state."$it.key".state != "synced" ) {
+				state."$it.key".value = settingValue
+				state."$it.key".state = "notSynced"
+				syncNeeded = true
+			}
+		}
+	}
+	
+	if(settings.wakeUpInterval != null) {
+		if (state.wakeUpInterval == null) { state.wakeUpInterval = [value: null, state: "synced"] } 
+		if (state.wakeUpInterval.value != ((settings.wakeUpInterval as Integer) * 3600)) { 
+			sendEvent(name: "checkInterval", value: (settings.wakeUpInterval as Integer) * 3600 * 4 + 120, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+			state.wakeUpInterval.value = ((settings.wakeUpInterval as Integer) * 3600)
+			state.wakeUpInterval.state = "notSynced"
+			syncNeeded = true
+		}
+	} else {
+		sendEvent(name: "checkInterval", value: 21600 * 4 + 120, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+	}
+	
+	if ( syncNeeded ) { 
+		logging("${device.displayName} - sync needed.", "info")
+		multiStatusEvent("Sync pending. Please wake up the device by pressing the tamper button.", true)
+	}
+}
+
+private syncNext() {
+	logging("${device.displayName} - Executing syncNext()","info")
+	def cmds = []
+	for ( param in parameterMap() ) {
+		if ( state."$param.key"?.value != null && state."$param.key"?.state in ["notSynced","inProgress"] ) {
+			multiStatusEvent("Sync in progress. (param: ${param.num})", true)
+			state."$param.key"?.state = "inProgress"
+			cmds << response(encap(zwave.configurationV2.configurationSet(configurationValue: intToParam(state."$param.key".value, param.size), parameterNumber: param.num, size: param.size)))
+			cmds << response(encap(zwave.configurationV2.configurationGet(parameterNumber: param.num)))
+			break
+		} 
+	}
+	if (cmds) { 
+		runIn(10, "syncCheck")
+		sendHubCommand(cmds,1000)
+	} else {
+		runIn(1, "syncCheck")
+	}
+}
+
+private syncCheck() {
+	logging("${device.displayName} - Executing syncCheck()","info")
+	def failed = []
+	def incorrect = []
+	def notSynced = []
+	parameterMap().each {
+		if (state."$it.key"?.state == "incorrect" ) {
+			incorrect << it
+		} else if ( state."$it.key"?.state == "failed" ) {
+			failed << it
+		} else if ( state."$it.key"?.state in ["inProgress","notSynced"] ) {
+			notSynced << it
+		}
+	}
+	
+	if (failed) {
+		multiStatusEvent("Sync failed! Verify parameter: ${failed[0].num}", true, true)
+	} else if (incorrect) {
+		multiStatusEvent("Sync mismatch! Verify parameter: ${incorrect[0].num}", true, true)
+	} else if (notSynced) {
+		multiStatusEvent("Sync incomplete! Wake up the device again by pressing the tamper button.", true, true)
+	} else {
+		sendHubCommand(response(encap(zwave.wakeUpV1.wakeUpNoMoreInformation())))
+		if (device.currentValue("multiStatus")?.contains("Sync")) { multiStatusEvent("Sync OK.", true, true) }
+	}
+}
+
+private multiStatusEvent(String statusValue, boolean force = false, boolean display = false) {
+	if (!device.currentValue("multiStatus")?.contains("Sync") || device.currentValue("multiStatus") == "Sync OK." || force) {
+		sendEvent(name: "multiStatus", value: statusValue, descriptionText: statusValue, displayed: display)
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd) {
+	logging("${device.displayName} woke up", "info")
+	def cmds = []
+	sendEvent(descriptionText: "$device.displayName woke up", isStateChange: true)
+	if ( state.wakeUpInterval?.state == "notSynced" && state.wakeUpInterval?.value != null ) {
+		cmds << zwave.wakeUpV2.wakeUpIntervalSet(seconds: state.wakeUpInterval.value as Integer, nodeid: zwaveHubNodeId)
+		state.wakeUpInterval.state = "synced"
+	}
+	cmds << zwave.batteryV1.batteryGet()
+	cmds << zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 1)
+	runIn(1,"syncNext")
+	[response(encapSequence(cmds,1000))]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.configurationv2.ConfigurationReport cmd) {
+	def paramKey = parameterMap().find( {it.num == cmd.parameterNumber } ).key
+	logging("${device.displayName} - Parameter ${paramKey} value is ${cmd.scaledConfigurationValue} expected " + state."$paramKey".value, "info")
+	state."$paramKey".state = (state."$paramKey".value == cmd.scaledConfigurationValue) ? "synced" : "incorrect"
+	syncNext()
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.applicationstatusv1.ApplicationRejectedRequest cmd) {
+	logging("${device.displayName} - rejected request!","warn")
+	for ( param in parameterMap() ) {
+		if ( state."$param.key"?.state == "inProgress" ) {
+			state."$param.key"?.state = "failed"
+			break
+		} 
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.alarmv2.AlarmReport cmd) {
+	logging("${device.displayName} - AlarmReport received, zwaveAlarmType: ${cmd.zwaveAlarmType}, zwaveAlarmEvent: ${cmd.zwaveAlarmEvent}", "info")
+	def lastTime = new Date().format("yyyy MMM dd EEE h:mm:ss a", location.timeZone)
+	switch (cmd.zwaveAlarmType) {
+		case 6: 
+			sendEvent(name: "contact", value: (cmd.zwaveAlarmEvent == 22)? "open":"closed"); 
+			if (cmd.zwaveAlarmEvent == 22) { multiStatusEvent("Contact Open - $lastTime") }
+			break;
+		case 7: 
+			sendEvent(name: "tamper", value: (cmd.zwaveAlarmEvent == 3)? "detected":"clear"); 
+			if (cmd.zwaveAlarmEvent == 3) { multiStatusEvent("Tamper - $lastTime") }
+			break;
+		case 4:
+			if (device.currentValue("temperatureAlarm")?.value != null) {
+				switch (cmd.zwaveAlarmEvent) {
+					case 0: sendEvent(name: "temperatureAlarm", value: "clear"); break;
+					case 2: sendEvent(name: "temperatureAlarm", value: "overheat"); break;
+					case 6: sendEvent(name: "temperatureAlarm", value: "underheat"); break;
+				}; 
+			};
+			break;
+		default: logging("${device.displayName} - Unknown zwaveAlarmType: ${cmd.zwaveAlarmType}","warn");
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv5.SensorMultilevelReport cmd) {
+	logging("${device.displayName} - SensorMultilevelReport received, sensorType: ${cmd.sensorType}, scaledSensorValue: ${cmd.scaledSensorValue}", "info")
+	switch (cmd.sensorType) {
+		case 1:
+			def cmdScale = cmd.scale == 1 ? "F" : "C"
+			sendEvent(name: "temperature", unit: getTemperatureScale(), value: convertTemperatureIfNeeded(cmd.scaledSensorValue, cmdScale, cmd.precision), displayed: true)
+			break
+		default: 
+			logging("${device.displayName} - Unknown sensorType: ${cmd.sensorType}","warn")
+			break
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
+	logging("${device.displayName} - BatteryReport received, value: ${cmd.batteryLevel}", "info")
+	sendEvent(name: "battery", value: cmd.batteryLevel.toString(), unit: "%", displayed: true)
+}
+
+def parse(String description) {
+	def result = []
+	logging("${device.displayName} - Parsing: ${description}")
+	if (description.startsWith("Err 106")) {
+		result = createEvent(
+			descriptionText: "Failed to complete the network security key exchange. If you are unable to receive data from it, you must remove it from your network and add it again.",
+			eventType: "ALERT",
+			name: "secureInclusion",
+			value: "failed",
+			displayed: true,
+		)
+	} else if (description == "updated") {
+		return null
+	} else {
+		def cmd = zwave.parse(description, cmdVersions()) 
+		if (cmd) {
+			logging("${device.displayName} - Parsed: ${cmd}")
+			zwaveEvent(cmd)
+		}
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
+	def encapsulatedCommand = cmd.encapsulatedCommand(cmdVersions()) 
+	if (encapsulatedCommand) {
+		logging("${device.displayName} - Parsed SecurityMessageEncapsulation into: ${encapsulatedCommand}")
+		zwaveEvent(encapsulatedCommand)
+	} else {
+		log.warn "Unable to extract secure cmd from $cmd"
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.crc16encapv1.Crc16Encap cmd) {
+	def version = cmdVersions()[cmd.commandClass as Integer]
+	def ccObj = version ? zwave.commandClass(cmd.commandClass, version) : zwave.commandClass(cmd.commandClass)
+	def encapsulatedCommand = ccObj?.command(cmd.command)?.parse(cmd.data)
+	if (encapsulatedCommand) {
+		logging("${device.displayName} - Parsed Crc16Encap into: ${encapsulatedCommand}")
+		zwaveEvent(encapsulatedCommand)
+	} else {
+		log.warn "Could not extract crc16 command from $cmd"
+	}
+}
+
+private logging(text, type = "debug") {
+	if (settings.logging == "true") {
+		log."$type" text
+	}
+}
+
+private secEncap(physicalgraph.zwave.Command cmd) {
+	logging("${device.displayName} - encapsulating command using Secure Encapsulation, command: $cmd","info")
+	zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
+}
+
+private crcEncap(physicalgraph.zwave.Command cmd) {
+	logging("${device.displayName} - encapsulating command using CRC16 Encapsulation, command: $cmd","info")
+	zwave.crc16EncapV1.crc16Encap().encapsulate(cmd).format() 
+}
+
+private encap(physicalgraph.zwave.Command cmd) {
+	if (zwaveInfo.zw.contains("s")) { 
+		secEncap(cmd)
+	} else if (zwaveInfo.cc.contains("56")){ 
+		crcEncap(cmd)
+	} else {
+		logging("${device.displayName} - no encapsulation supported for command: $cmd","info")
+		cmd.format()
+	}
+}
+
+private encapSequence(cmds, Integer delay=250) {
+	delayBetween(cmds.collect{ encap(it) }, delay)
+}
+
+private List intToParam(Long value, Integer size = 1) {
+	def result = []
+	size.times { 
+		result = result.plus(0, (value & 0xFF) as Short)
+		value = (value >> 8)
+	}
+	return result
+}
+
+private Map cmdVersions() {
+	[0x5E: 2, 0x59: 1, 0x22: 1, 0x80: 1, 0x56: 1, 0x7A: 3, 0x73: 1, 0x98: 1, 0x31: 5, 0x85: 2, 0x70: 2, 0x5A: 1, 0x72: 2, 0x8E: 2, 0x71: 2, 0x86: 1, 0x84: 2]
+}
+
+private parameterMap() {[
+	[key: "doorState", num: 1, size: 1, type: "enum", options: [0: "Closed when magnet near", 1: "Opened when magnet near"], def: "0", title: "Door/window state", 
+		descr: "Defines the state of door/window depending on the magnet position."],
+	[key: "ledIndications", num: 2, size: 1, type: "enum", options: [
+		1: "Indication of opening/closing",
+		2: "Indication of wake up",
+		4: "Indication of device tampering",
+		6: "Indication of wake up & tampering",
+		], 
+		def: "6", title: "Visual LED indications", 
+		descr: "Defines events indicated by the visual LED indicator. Disabling events might extend battery life."],
+	[key: "tamperDelay", num: 30, size: 2, type: "number", def: 5, min: 0, max: 32400, title: "Tamper - alarm cancellation delay", 
+		descr: "Time period after which a tamper alarm will be cancelled.\n0-32400 - time in seconds"], 
+	[key: "tamperCancelation", num: 31, size: 1, type: "enum", options: [0: "Do not send tamper cancellation report", 1: "Send tamper cancellation report"], def: "1", title: "Tamper – reporting alarm cancellation", 
+		descr: "Reporting cancellation of tamper alarm to the controller and 3rd association group."],
+	[key: "temperatureMeasurement", num: 50, size: 2, type: "number", def: 300, min: 0, max: 32400, title: "Interval of temperature measurements", 
+		descr: "This parameter defines how often the temperature will be measured (specific time).\n0 - temperature measurements disabled\n5-32400 - time in seconds"], 
+	[key: "temperatureThreshold", num: 51, size: 2, type: "enum", options: [
+		0: "disabled", 
+		3: "0.5°F/0.3°C", 
+		6: "1°F/0.6°C",
+		11: "2°F/1.1°C",
+		17: "3°F/1.7°C",
+		22: "4°F/2.2°C",
+		28: "5°F/2.8°C"],
+		def: 11, title: "Temperature reports threshold", 
+		descr: "Change of temperature resulting in temperature report being sent to the HUB."],
+	[key: "temperatureAlarm", num: 54, size: 1, type: "enum", options: [
+		0: "Temperature alarms disabled", 
+		1: "High temperature alarm",
+		2: "Low temperature alarm",
+		3: "High and low temperature alarms"], 
+		def: "0", title: "Temperature alarm reports", 
+		descr: "Temperature alarms reported to the Z-Wave controller. Thresholds are set in parameters 55 and 56"],
+	[key: "temperatureHigh", num: 55, size: 2, type: "enum", options: [
+		0: "disabled",
+		200: "68°F/20°C",
+		250: "77°F/25°C",
+		300: "86°F/30°C",
+		350: "95°F/35°C",
+		400: "104°F/40°C",
+		450: "113°F/45°C",
+		500: "122°F/50°C",
+		550: "131°F/55°C",
+		600: "140°F/60°C"],
+		def: 350, title: "High temperature alarm threshold", 
+		descr: "If temperature is higher than set value, overheat high temperature alarm will be triggered."], 
+	[key: "temperatureLow", num: 56, size: 2, type: "enum", options: [
+		0: "disabled",
+		6: "33°F/0.6°C",
+		10: "34°F/1°C",
+		22: "36°F/2.2°C",
+		33: "38°F/3.3°C",
+		44: "40°F/4.4°C",
+		50: "41°F/5°C",
+		100: "50°F/10°C",
+		150: "59°F/15°C",
+		200: "68°F/20°C",
+		250: "77°F/25°C"],
+		def: 100, title: "Low temperature alarm threshold", 
+		descr: "If temperature is lower than set value, low temperature alarm will be triggered."]
+	]
+}
\ No newline at end of file