diff --git a/devicetypes/fortrezz/fortrezz-water-sensor.src/fortrezz-water-sensor.groovy b/devicetypes/fortrezz/fortrezz-water-sensor.src/fortrezz-water-sensor.groovy new file mode 100644 index 0000000..45548c0 --- /dev/null +++ b/devicetypes/fortrezz/fortrezz-water-sensor.src/fortrezz-water-sensor.groovy @@ -0,0 +1,180 @@ +/** + * Copyright 2015 SmartThings + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except + * in compliance with the License. You may obtain a copy of the License at: + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software distributed under the License is distributed + * on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License + * for the specific language governing permissions and limitations under the License. + * + */ +metadata { + definition (name: "FortrezZ Water Sensor", namespace: "fortrezz", author: "SmartThings") { + capability "Water Sensor" + capability "Sensor" + capability "Battery" + capability "Temperature Measurement" + + fingerprint deviceId: "0x2001", inClusters: "0x30,0x9C,0x9D,0x85,0x80,0x72,0x31,0x84,0x86" + fingerprint deviceId: "0x2101", inClusters: "0x71,0x70,0x85,0x80,0x72,0x31,0x84,0x86" + } + + simulator { + status "dry": "command: 7105, payload: 00 00 00 FF 05 FE 00 00" + status "wet": "command: 7105, payload: 00 FF 00 FF 05 02 00 00" + status "overheated": "command: 7105, payload: 00 00 00 FF 04 02 00 00" + status "freezing": "command: 7105, payload: 00 00 00 FF 04 05 00 00" + status "normal": "command: 7105, payload: 00 00 00 FF 04 FE 00 00" + for (int i = 0; i <= 100; i += 20) { + status "battery ${i}%": new physicalgraph.zwave.Zwave().batteryV1.batteryReport(batteryLevel: i).incomingMessage() + } + } + + tiles(scale: 2) { + multiAttributeTile(name:"water", type: "generic", width: 6, height: 4){ + tileAttribute ("device.water", key: "PRIMARY_CONTROL") { + attributeState "dry", label: "Dry", icon:"st.alarm.water.dry", backgroundColor:"#ffffff" + attributeState "wet", label: "Wet", icon:"st.alarm.water.wet", backgroundColor:"#53a7c0" + } + } + standardTile("temperatureState", "device.temperature", width: 2, height: 2) { + state "normal", icon:"st.alarm.temperature.normal", backgroundColor:"#ffffff" + state "freezing", icon:"st.alarm.temperature.freeze", backgroundColor:"#53a7c0" + state "overheated", icon:"st.alarm.temperature.overheat", backgroundColor:"#F80000" + } + valueTile("temperature", "device.temperature", width: 2, height: 2) { + state("temperature", label:'${currentValue}°', + backgroundColors:[ + [value: 31, color: "#153591"], + [value: 44, color: "#1e9cbb"], + [value: 59, color: "#90d2a7"], + [value: 74, color: "#44b621"], + [value: 84, color: "#f1d801"], + [value: 95, color: "#d04e00"], + [value: 96, color: "#bc2323"] + ] + ) + } + valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) { + state "battery", label:'${currentValue}% battery', unit:"" + } + main (["water", "temperatureState"]) + details(["water", "temperatureState", "temperature", "battery"]) + } +} + +def parse(String description) { + def result = [] + def parsedZwEvent = zwave.parse(description, [0x30: 1, 0x71: 2, 0x84: 1]) + + if(parsedZwEvent) { + if(parsedZwEvent.CMD == "8407") { + def lastStatus = device.currentState("battery") + def ageInMinutes = lastStatus ? (new Date().time - lastStatus.date.time)/60000 : 600 + log.debug "Battery status was last checked ${ageInMinutes} minutes ago" + + if (ageInMinutes >= 600) { + log.debug "Battery status is outdated, requesting battery report" + result << new physicalgraph.device.HubAction(zwave.batteryV1.batteryGet().format()) + } + result << new physicalgraph.device.HubAction(zwave.wakeUpV1.wakeUpNoMoreInformation().format()) + } + result << createEvent( zwaveEvent(parsedZwEvent) ) + } + if(!result) result = [ descriptionText: parsedZwEvent, displayed: false ] + log.debug "Parse returned ${result}" + return result +} + +def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd) +{ + [descriptionText: "${device.displayName} woke up", isStateChange: false] +} + +def zwaveEvent(physicalgraph.zwave.commands.sensorbinaryv1.SensorBinaryReport cmd) +{ + def map = [:] + map.name = "water" + map.value = cmd.sensorValue ? "wet" : "dry" + map.descriptionText = "${device.displayName} is ${map.value}" + map +} + +def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) { + def map = [:] + if(cmd.batteryLevel == 0xFF) { + map.name = "battery" + map.value = 1 + map.descriptionText = "${device.displayName} has a low battery" + map.displayed = true + } else { + map.name = "battery" + map.value = cmd.batteryLevel > 0 ? cmd.batteryLevel.toString() : 1 + map.unit = "%" + map.displayed = false + } + map +} + +def zwaveEvent(physicalgraph.zwave.commands.alarmv2.AlarmReport cmd) +{ + def map = [:] + if (cmd.zwaveAlarmType == physicalgraph.zwave.commands.alarmv2.AlarmReport.ZWAVE_ALARM_TYPE_WATER) { + map.name = "water" + map.value = cmd.alarmLevel ? "wet" : "dry" + map.descriptionText = "${device.displayName} is ${map.value}" + } + if(cmd.zwaveAlarmType == physicalgraph.zwave.commands.alarmv2.AlarmReport.ZWAVE_ALARM_TYPE_HEAT) { + map.name = "temperatureState" + if(cmd.zwaveAlarmEvent == 1) { map.value = "overheated"} + if(cmd.zwaveAlarmEvent == 2) { map.value = "overheated"} + if(cmd.zwaveAlarmEvent == 3) { map.value = "changing temperature rapidly"} + if(cmd.zwaveAlarmEvent == 4) { map.value = "changing temperature rapidly"} + if(cmd.zwaveAlarmEvent == 5) { map.value = "freezing"} + if(cmd.zwaveAlarmEvent == 6) { map.value = "freezing"} + if(cmd.zwaveAlarmEvent == 254) { map.value = "normal"} + map.descriptionText = "${device.displayName} is ${map.value}" + } + + map +} + +def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv5.SensorMultilevelReport cmd) +{ + def map = [:] + if(cmd.sensorType == 1) { + map.name = "temperature" + if(cmd.scale == 0) { + map.value = getTemperature(cmd.scaledSensorValue) + } else { + map.value = cmd.scaledSensorValue + } + map.unit = location.temperatureScale + } + map +} + +def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd) +{ + def map = [:] + map.name = "water" + map.value = cmd.value ? "wet" : "dry" + map.descriptionText = "${device.displayName} is ${map.value}" + map +} + +def getTemperature(value) { + if(location.temperatureScale == "C"){ + return value + } else { + return Math.round(celsiusToFahrenheit(value)) + } +} + +def zwaveEvent(physicalgraph.zwave.Command cmd) +{ + log.debug "COMMAND CLASS: $cmd" +} \ No newline at end of file