Merge pull request #1916 from SmartThingsCommunity/staging

Rolling down staging to master

devicetypes/drzwave/ezmultipli.src/ezmultipli.groovy

@@ -0,0 +1,426 @@
+// Express Controls EZMultiPli Multi-sensor 
+// Motion Sensor - Temperature - Light level - 8 Color Indicator LED - Z-Wave Range Extender - Wall Powered
+// driver for SmartThings
+// The EZMultiPli is also known as the HSM200 from HomeSeer.com
+//
+// 2017-04-10 - DrZwave (with help from Don Kirker) - changed fingerprint to the new format, lowered the OnTime 
+//              and other parameters to be "more in line with ST user expectations", get the luminance in LUX so it reports in lux all the time.
+// 2016-10-06 - erocm1231 - Added "updated" method to run when configuration options are changed. Depending on model of unit, luminance is being
+//              reported as a relative percentace or as a lux value. Added the option to configure this in the handler.
+// 2016-01-28 - erocm1231 - Changed the configuration method to use scaledConfiguration so that it properly formatted negative numbers.
+//              Also, added configurationGet and a configurationReport method so that config values can be verified.
+// 2015-12-04 - erocm1231 - added range value to preferences as suggested by @Dela-Rick.
+// 2015-11-26 - erocm1231 - Fixed null condition error when adding as a new device. 
+// 2015-11-24 - erocm1231 - Added refresh command. Made a few changes to how the handler maps colors to the LEDs. Fixed 
+//              the device not having its on/off status updated when colors are changed.
+// 2015-11-23 - erocm1231 - Changed the look to match SmartThings v2 devices. 
+// 2015-11-21 - erocm1231 - Made code much more efficient. Also made it compatible when setColor is passed a hex value.
+//              Mapping of special colors: Soft White - Default - Yellow, White - Concentrate - White, 
+//              Daylight - Energize - Teal, Warm White - Relax - Yellow
+// 2015-11-19 - erocm1231 - Fixed a couple incorrect colors, changed setColor to be more compatible with other apps
+// 2015-11-18 - erocm1231 - Added to setColor for compatibility with Smart Lighting
+// v0.1.0 - DrZWave - chose better icons, Got color LED to work - first fully functional version
+// v0.0.9 - jrs - got the temp and luminance to work. Motion works. Debugging the color wheel.
+// v0.0.8 - DrZWave 2/25/2015 - change the color control to be tiles since there are only 8 colors.
+// v0.0.7 - jrs - 02/23/2015 - Jim Sulin
+
+metadata {
+	definition (name: "EZmultiPli", namespace: "DrZWave", author: "Eric Ryherd", oauth: true) {
+	capability "Actuator"
+	capability "Sensor"
+	capability "Motion Sensor"
+	capability "Temperature Measurement"
+	capability "Illuminance Measurement"
+	capability "Switch"
+	capability "Color Control"
+	capability "Configuration"
+    capability "Refresh"
+
+	fingerprint mfr: "001E", prod: "0004", model: "0001" // new format for Fingerprint which is unique for every certified Z-Wave product
+	} // end definition
+
+	simulator {
+		// messages the device returns in response to commands it receives
+		status "motion"     : "command: 7105000000FF07, payload: 07"
+		status "no motion"  : "command: 7105000000FF07, payload: 00"
+
+		for (int i = 0; i <= 100; i += 20) {
+			status "temperature ${i}F": new physicalgraph.zwave.Zwave().sensorMultilevelV5.sensorMultilevelReport(
+				scaledSensorValue: i, precision: 1, sensorType: 1, scale: 1).incomingMessage()
+		}
+		for (int i = 0; i <= 100; i += 20) {
+			status "luminance ${i} %": new physicalgraph.zwave.Zwave().sensorMultilevelV5.sensorMultilevelReport(
+				scaledSensorValue: i, precision: 0, sensorType: 3).incomingMessage()
+		}
+
+	} //end simulator
+
+    
+    tiles (scale: 2){      
+		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+			tileAttribute ("device.switch", key: "PRIMARY_CONTROL", icon: "st.Lighting.light18") {
+				attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
+				attributeState "turningOn", label:'${name}', icon:"st.switches.light.on", backgroundColor:"#79b821"
+				attributeState "turningOff", label:'${name}', icon:"st.switches.light.off", backgroundColor:"#ffffff"
+			}
+			tileAttribute ("device.color", key: "COLOR_CONTROL") {
+				attributeState "color", action:"setColor"
+			}
+			tileAttribute ("statusText", key: "SECONDARY_CONTROL") {
+				attributeState "statusText", label:'${currentValue}'
+			}
+        }
+
+		standardTile("motion", "device.motion", width: 2, height: 2, canChangeIcon: true, canChangeBackground: true) {
+			state "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0"
+			state "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff"
+		}
+		valueTile("temperature", "device.temperature", width: 2, height: 2) {
+			state "temperature", label:'${currentValue}°', unit:"F", icon:"", // would be better if the units would switch to the desired units of the system (imperial or metric)
+			backgroundColors:[
+				[value: 0,  color: "#1010ff"], // blue=cold
+				[value: 65, color: "#a0a0f0"],
+				[value: 70, color: "#e0e050"],
+				[value: 75, color: "#f0d030"], // yellow
+				[value: 80, color: "#fbf020"],
+				[value: 85, color: "#fbdc01"],
+				[value: 90, color: "#fb3a01"],
+				[value: 95, color: "#fb0801"]  // red=hot
+			]
+		}
+
+        // icons to use would be st.Weather.weather2 or st.alarm.temperature.normal - see http://scripts.3dgo.net/smartthings/icons/ for a list of icons
+		valueTile("illuminance", "device.illuminance", width: 2, height: 2, inactiveLabel: false) {
+// jrs 4/7/2015 - Null on display
+			//state "luminosity", label:'${currentValue} ${unit}'
+			state "luminosity", label:'${currentValue}', unit:'${currentValue}', icon:"",
+			backgroundColors:[
+				[value: 25, color: "#404040"],
+				[value: 50, color: "#808080"],
+				[value: 75, color: "#a0a0a0"],
+				[value: 90, color: "#e0e0e0"],
+                //lux measurement values
+                [value: 150, color: "#404040"],
+				[value: 300, color: "#808080"],
+				[value: 600, color: "#a0a0a0"],
+				[value: 900, color: "#e0e0e0"]
+			]
+		}
+		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+		}    
+		standardTile("configure", "device.configure", inactiveLabel: false, width: 2, height: 2, decoration: "flat") {
+			state "configure", label:'', action:"configuration.configure", icon:"st.secondary.configure"
+		}
+
+		main (["temperature","motion", "switch"])
+		details(["switch", "motion", "temperature", "illuminance", "refresh", "configure"])
+	}  // end tiles
+    
+	preferences {
+       input "OnTime",  "number", title: "No Motion Interval", description: "N minutes lights stay on after no motion detected [0, 1-127]", range: "0..127", defaultValue: 2, displayDuringSetup: true, required: false
+       input "OnLevel", "number", title: "Dimmer Onlevel", description: "Dimmer OnLevel for associated node 2 lights [-1, 0, 1-99]", range: "-1..99", defaultValue: -1, displayDuringSetup: true, required: false
+       input "LiteMin", "number", title: "Luminance Report Frequency", description: "Luminance report sent every N minutes [0-127]", range: "0..127", defaultValue: 6, displayDuringSetup: true, required: false
+       input "TempMin", "number", title: "Temperature Report Frequency", description: "Temperature report sent every N minutes [0-127]", range: "0..127", defaultValue: 6, displayDuringSetup: true, required: false
+       input "TempAdj", "number", title: "Temperature Calibration", description: "Adjust temperature up/down N tenths of a degree F [(-127)-(+128)]", range: "-127..128", defaultValue: 0, displayDuringSetup: true, required: false
+       input("lum", "enum", title:"Illuminance Measurement", description: "Percent or Lux", defaultValue: 2 ,required: false, displayDuringSetup: true, options:
+          [1:"Percent",
+           2:"Lux"])
+  }
+
+} // end metadata
+
+
+// Parse incoming device messages from device to generate events
+def parse(String description){
+	//log.debug "==> New Zwave Event: ${description}"
+	def result = []
+	def cmd = zwave.parse(description, [0x31: 5]) // 0x31=SensorMultilevel which we force to be version 5
+	if (cmd) {
+		def cmdData = zwaveEvent(cmd)
+		if (cmdData != [:])
+			result << createEvent(cmdData)
+	}
+    
+    def statusTextmsg = ""
+    if (device.currentState('temperature') != null && device.currentState('illuminance') != null) {
+		statusTextmsg = "${device.currentState('temperature').value} ° - ${device.currentState('illuminance').value} ${(lum == "" || lum == null || lum == 1) ? "%" : "LUX"}"
+    	sendEvent("name":"statusText", "value":statusTextmsg, displayed:false)
+	}
+    if (result != [null] && result != []) log.debug "Parse returned ${result}"
+    
+    
+	return result
+}
+
+
+// Event Generation
+def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv5.SensorMultilevelReport cmd){
+	def map = [:]
+	switch (cmd.sensorType) {
+		case 0x01:				// SENSOR_TYPE_TEMPERATURE_VERSION_1
+			def cmdScale = cmd.scale == 1 ? "F" : "C"
+			map.value = convertTemperatureIfNeeded(cmd.scaledSensorValue, cmdScale, cmd.precision)
+			map.unit = getTemperatureScale()
+			map.name = "temperature"
+			log.debug "Temperature report"
+			break;
+		case 0x03 :				// SENSOR_TYPE_LUMINANCE_VERSION_1
+			map.value = cmd.scaledSensorValue.toInteger().toString()
+            if(lum == "" || lum == null || lum == 1) map.unit = "%"
+            else map.unit = "lux"
+			map.name = "illuminance"
+			log.debug "Luminance report"
+			break;
+	}
+	return map
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.configurationv2.ConfigurationReport cmd) {
+    log.debug "${device.displayName} parameter '${cmd.parameterNumber}' with a byte size of '${cmd.size}' is set to '${cmd.configurationValue}'"
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cmd) {
+	def map = [:]
+	if (cmd.notificationType==0x07) {	// NOTIFICATION_TYPE_BURGLAR
+    		if (cmd.event==0x07 || cmd.event==0x08) {
+			map.name = "motion"
+            	map.value = "active"
+			map.descriptionText = "$device.displayName motion detected"
+            	log.debug "motion recognized"
+		} else if (cmd.event==0) {
+			map.name = "motion"
+            	map.value = "inactive"
+			map.descriptionText = "$device.displayName no motion detected"
+            	log.debug "No motion recognized"
+    		}
+	} 
+	if (map.name != "motion") {
+    		log.debug "unmatched parameters for cmd: ${cmd.toString()}}"
+	}
+	return map
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) {
+    if (cmd.value == 0 && device.latestState("color").value != "#ffffff") {
+        sendEvent(name: "color", value: "#ffffff", displayed: true)
+    }
+    [name: "switch", value: cmd.value ? "on" : "off", type: "digital"]
+}
+
+def updated()
+{
+    log.debug "updated() is being called"
+    
+    def cmds = configure()
+    
+    if (cmds != []) response(cmds)
+}
+
+def on() {
+	log.debug "Turning Light 'on'"
+	delayBetween([
+		zwave.basicV1.basicSet(value: 0xFF).format(),
+		zwave.basicV1.basicGet().format()
+	], 500)
+}
+
+def off() {
+	log.debug "Turning Light 'off'"
+	delayBetween([
+		zwave.basicV1.basicSet(value: 0x00).format(),
+		zwave.basicV1.basicGet().format()
+	], 500)
+}
+
+
+def setColor(value) {
+    log.debug "setColor() : ${value}"
+    def myred
+    def mygreen
+    def myblue
+    def hexValue
+    def cmds = []
+
+    if ( value.level == 1 && value.saturation > 20) {
+		def rgb = huesatToRGB(value.hue as Integer, 100)
+        myred = rgb[0] >=128 ? 255 : 0
+        mygreen = rgb[1] >=128 ? 255 : 0
+        myblue = rgb[2] >=128 ? 255 : 0
+    } 
+    else if ( value.level > 1 ) {
+		def rgb = huesatToRGB(value.hue as Integer, value.saturation as Integer)
+        myred = rgb[0] >=128 ? 255 : 0
+        mygreen = rgb[1] >=128 ? 255 : 0
+        myblue = rgb[2] >=128 ? 255 : 0
+    } 
+    else if (value.hex) {
+		def rgb = value.hex.findAll(/[0-9a-fA-F]{2}/).collect { Integer.parseInt(it, 16) }
+        myred = rgb[0] >=128 ? 255 : 0
+        mygreen = rgb[1] >=128 ? 255 : 0
+        myblue = rgb[2] >=128 ? 255 : 0
+    }
+    else {
+        myred=value.red >=128 ? 255 : 0	// the EZMultiPli has just on/off for each of the 3 channels RGB so convert the 0-255 value into 0 or 255.
+        mygreen=value.green >=128 ? 255 : 0
+        myblue=value.blue>=128 ? 255 : 0
+    }
+    //log.debug "Red: ${myred} Green: ${mygreen} Blue: ${myblue}"
+  	//cmds << zwave.colorControlV1.stateSet(stateDataLength: 3, VariantGroup1: [0x02, myred], VariantGroup2:[ 0x03, mygreen], VariantGroup3:[0x04,myblue]).format() // ST support for this command as of 2015/02/23 does not support the color IDs so this command cannot be used.
+    // So instead we'll use these commands to hack around the lack of support of the above command
+	cmds << zwave.basicV1.basicSet(value: 0x00).format() // As of 2015/02/23 ST is not supporting stateSet properly but found this hack that works. 
+	if (myred!=0) {
+       	cmds << zwave.colorControlV1.startCapabilityLevelChange(capabilityId: 0x02, startState: myred, ignoreStartState: True, updown: True).format()
+		cmds << zwave.colorControlV1.stopStateChange(capabilityId: 0x02).format()
+    }
+    if (mygreen!=0) {
+	 	cmds << zwave.colorControlV1.startCapabilityLevelChange(capabilityId: 0x03, startState: mygreen, ignoreStartState: True, updown: True).format()
+	 	cmds << zwave.colorControlV1.stopStateChange(capabilityId: 0x03).format()
+    }
+    if (myblue!=0) {
+		cmds << zwave.colorControlV1.startCapabilityLevelChange(capabilityId: 0x04, startState: myblue, ignoreStartState: True, updown: True).format()
+		cmds << zwave.colorControlV1.stopStateChange(capabilityId: 0x04).format()
+    }
+    cmds << zwave.basicV1.basicGet().format()
+    hexValue = rgbToHex([r:myred, g:mygreen, b:myblue])
+    if(hexValue) sendEvent(name: "color", value: hexValue, displayed: true)
+    delayBetween(cmds, 100)
+}
+
+def zwaveEvent(physicalgraph.zwave.Command cmd) {
+	// Handles all Z-Wave commands we aren't interested in
+	[:]
+}
+
+// ensure we are passing acceptable param values for LiteMin & TempMin configs
+def checkLiteTempInput(value) {
+	if (value == null) {
+    	value=60
+    }
+    def liteTempVal = value.toInteger()
+    switch (liteTempVal) {
+      case { it < 0 }:
+        return 60			// bad value, set to default
+        break
+      case { it > 127 }:
+        return 127			// bad value, greater then MAX, set to MAX
+        break
+      default:
+        return liteTempVal	// acceptable value
+    }
+}
+
+// ensure we are passing acceptable param value for OnTime config
+def checkOnTimeInput(value) {
+	if (value == null) {
+    	value=10
+    }
+    def onTimeVal = value.toInteger()
+    switch (onTimeVal) {
+      case { it < 0 }:
+        return 10			// bad value set to default
+        break
+      case { it > 127 }:
+        return 127			// bad value, greater then MAX, set to MAX
+        break
+      default:
+        return onTimeVal	// acceptable value
+    }
+}
+
+// ensure we are passing acceptable param value for OnLevel config
+def checkOnLevelInput(value) {
+	if (value == null) {
+    	value=99
+    }  
+    def onLevelVal = value.toInteger()
+    switch (onLevelVal) {
+      case { it < -1 }:
+        return -1			// bad value set to default
+        break
+      case { it > 99 }:
+        return 99			// bad value, greater then MAX, set to MAX
+        break
+      default:
+        return onLevelVal	// acceptable value
+    }
+}
+
+
+// ensure we are passing an acceptable param value for TempAdj configs
+def checkTempAdjInput(value) {
+	if (value == null) {
+    	value=0
+    }
+	def tempAdjVal = value.toInteger()
+    switch (tempAdjVal) {
+      case { it < -127 }:
+        return 0			// bad value, set to default
+        break
+      case { it > 128 }:
+        return 128			// bad value, greater then MAX, set to MAX
+        break
+      default:
+        return tempAdjVal	// acceptable value
+    }
+}
+
+def refresh() {
+	def cmd = []
+    cmd << zwave.switchColorV3.switchColorGet().format()
+    cmd << zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType:1, scale:1).format()
+    cmd << zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType:3, scale:1).format()
+    cmd << zwave.basicV1.basicGet().format()
+    delayBetween(cmd, 1000)
+}
+
+def configure() {
+	log.debug "OnTime=${settings.OnTime} OnLevel=${settings.OnLevel} TempAdj=${settings.TempAdj}"
+	def cmd = delayBetween([
+		zwave.configurationV1.configurationSet(parameterNumber: 1, size: 1, scaledConfigurationValue: checkOnTimeInput(settings.OnTime)).format(),
+		zwave.configurationV1.configurationSet(parameterNumber: 2, size: 1, scaledConfigurationValue: checkOnLevelInput(settings.OnLevel)).format(),
+		zwave.configurationV1.configurationSet(parameterNumber: 3, size: 1, scaledConfigurationValue: checkLiteTempInput(settings.LiteMin)).format(),
+		zwave.configurationV1.configurationSet(parameterNumber: 4, size: 1, scaledConfigurationValue: checkLiteTempInput(settings.TempMin)).format(),
+		zwave.configurationV1.configurationSet(parameterNumber: 5, size: 1, scaledConfigurationValue: checkTempAdjInput(settings.TempAdj)).format(),
+		zwave.configurationV1.configurationGet(parameterNumber: 1).format(),
+		zwave.configurationV1.configurationGet(parameterNumber: 2).format(),
+		zwave.configurationV1.configurationGet(parameterNumber: 3).format(),
+		zwave.configurationV1.configurationGet(parameterNumber: 4).format(),
+		zwave.configurationV1.configurationGet(parameterNumber: 5).format()
+	], 100)
+	//log.debug cmd
+	cmd + refresh()
+}
+
+def huesatToRGB(float hue, float sat) {
+	while(hue >= 100) hue -= 100
+	int h = (int)(hue / 100 * 6)
+	float f = hue / 100 * 6 - h
+	int p = Math.round(255 * (1 - (sat / 100)))
+	int q = Math.round(255 * (1 - (sat / 100) * f))
+	int t = Math.round(255 * (1 - (sat / 100) * (1 - f)))
+	switch (h) {
+		case 0: return [255, t, p]
+		case 1: return [q, 255, p]
+		case 2: return [p, 255, t]
+		case 3: return [p, q, 255]
+		case 4: return [t, p, 255]
+		case 5: return [255, p, q]
+	}
+}
+def rgbToHex(rgb) {
+    def r = hex(rgb.r)
+    def g = hex(rgb.g)
+    def b = hex(rgb.b)
+    def hexColor = "#${r}${g}${b}"
+    
+    hexColor
+}
+private hex(value, width=2) {
+	def s = new BigInteger(Math.round(value).toString()).toString(16)
+	while (s.size() < width) {
+		s = "0" + s
+	}
+	s
+}

devicetypes/smartthings/arrival-sensor-ha.src/arrival-sensor-ha.groovy

@@ -1,5 +1,5 @@
 /**
- *  Copyright 2016 SmartThings
+ *  Copyright 2017 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -59,7 +59,7 @@ def updated() {
 }
 
 def configure() {
-    def cmds = zigbee.batteryConfig(20, 20, 0x01)
+    def cmds = zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x0020) + zigbee.batteryConfig(20, 20, 0x01)
     log.debug "configure -- cmds: ${cmds}"
     return cmds
 }
@@ -166,4 +166,4 @@ def checkPresenceCallback() {
     if (timeSinceLastCheckin >= theCheckInterval) {
         handlePresenceEvent(false)
     }
-}
+}

devicetypes/smartthings/dimmer-switch.src/dimmer-switch.groovy

@@ -23,9 +23,9 @@ metadata {
 		capability "Health Check"
 		capability "Light"
 
-		fingerprint mfr:"0063", prod:"4457", deviceJoinName: "GE In-Wall Smart Dimmer "
-		fingerprint mfr:"0063", prod:"4944", deviceJoinName: "GE In-Wall Smart Dimmer "
-		fingerprint mfr:"0063", prod:"5044", deviceJoinName: "GE Plug-In Smart Dimmer "
+		fingerprint mfr:"0063", prod:"4457", deviceJoinName: "GE In-Wall Smart Dimmer"
+		fingerprint mfr:"0063", prod:"4944", deviceJoinName: "GE In-Wall Smart Dimmer"
+		fingerprint mfr:"0063", prod:"5044", deviceJoinName: "GE Plug-In Smart Dimmer"
 		fingerprint mfr:"0063", prod:"4944", model:"3034", deviceJoinName: "GE In-Wall Smart Fan Control"
 	}
 

devicetypes/smartthings/zigbee-dimmer-power.src/zigbee-dimmer-power.groovy

@@ -114,9 +114,17 @@ def refresh() {
 
 def configure() {
     log.debug "Configuring Reporting and Bindings."
-
+    def cmds = []
+    if (device.getDataValue("manufacturer") == "sengled") {
+        def startLevel = 0xFE
+        if ((device.currentState("level")?.value != null)) {
+            startLevel = Math.round(Integer.parseInt(device.currentState("level").value) * 0xFE / 100)
+        }
+        // Level Control Cluster, command Move to Level, level start level, transition time 0
+        cmds << zigbee.command(zigbee.LEVEL_CONTROL_CLUSTER, 0x00, sprintf("%02X0000", startLevel))
+    }
     // Device-Watch allows 2 check-in misses from device + ping (plus 1 min lag time)
     // enrolls with default periodic reporting until newer 5 min interval is confirmed
     sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-    refresh()
+    cmds + refresh()
 }

devicetypes/smartthings/zwave-door-window-sensor.src/zwave-door-window-sensor.groovy

@@ -30,6 +30,9 @@ metadata {
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x86,0x72,0x98", outClusters: "0x5A,0x82"
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x80,0x71,0x85,0x70,0x72,0x86,0x30,0x31,0x84,0x59,0x73,0x5A,0x8F,0x98,0x7A", outClusters:"0x20" // Philio multi+
 		fingerprint mfr:"0086", prod:"0002", model:"001D", deviceJoinName: "Aeon Labs Door/Window Sensor (Gen 5)"
+		fingerprint mfr:"014A", prod:"0001", model:"0002", deviceJoinName: "Ecolink Door/Window Sensor"
+		fingerprint mfr:"0086", prod:"0102", model:"0070", deviceJoinName:  "Aeon Labs Door/Window Sensor 6"
+		fingerprint mfr:"011A", prod:"0601", model:"0903", deviceJoinName: "Enerwave Magnetic Door/Window Sensor"
 	}
 
 	// simulator metadata

devicetypes/smartthings/zwave-switch.src/zwave-switch.groovy

@@ -22,9 +22,9 @@ metadata {
 		capability "Health Check"
 		capability "Light"
 
-		fingerprint mfr:"0063", prod:"4952", deviceJoinName: "Z-Wave Wall Switch"
-		fingerprint mfr:"0063", prod:"5257", deviceJoinName: "Z-Wave Wall Switch"
-		fingerprint mfr:"0063", prod:"5052", deviceJoinName: "Z-Wave Plug-In Switch"
+		fingerprint mfr:"0063", prod:"4952", deviceJoinName: "GE Wall Switch"
+		fingerprint mfr:"0063", prod:"5257", deviceJoinName: "GE Wall Switch"
+		fingerprint mfr:"0063", prod:"5052", deviceJoinName: "GE Plug-In Switch"
 		fingerprint mfr:"0113", prod:"5257", deviceJoinName: "Z-Wave Wall Switch"
 	}