Initial commit

devicetypes/smartthings/cooper-rf9500.src/cooper-rf9500.groovy

@@ -0,0 +1,184 @@
+/**
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Cooper RF9500", namespace: "smartthings", author: "juano23@gmail.com") {
+		capability "Switch"
+		capability "Switch Level"
+		capability "Button"
+        capability "Actuator"
+
+		//fingerprint deviceId: "0x1200", inClusters: "0x77 0x86 0x75 0x73 0x85 0x72 0xEF", outClusters: "0x26"
+	}
+
+	// simulator metadata
+	simulator {
+		// status messages
+		status "on": "on/off: 1"
+		status "off": "on/off: 0"
+
+		// reply messages
+		reply "zcl on-off on": "on/off: 1"
+		reply "zcl on-off off": "on/off: 0"
+	}
+
+	// UI tile definitions
+	tiles {
+		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
+			state "off", label: '${name}', action: "switch.on", icon: "st.Home.home30", backgroundColor: "#ffffff"
+			state "on", label: '${name}', action: "switch.off", icon: "st.Home.home30", backgroundColor: "#79b821"
+		}
+		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
+			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+		controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 3, inactiveLabel: false) {
+			state "level", action:"switch level.setLevel"
+		}
+        valueTile("level", "device.level", inactiveLabel: false, decoration: "flat") {
+			state "level", label:'${currentValue} %', unit:"%", backgroundColor:"#ffffff"
+		}
+		main "switch"
+		details(["switch", "refresh", "level", "levelSliderControl"])
+	}
+}
+
+def parse(String description) {
+	def results = []
+	if (description.startsWith("Err")) {
+	    results = createEvent(descriptionText:description, displayed:true)
+	} else {
+		def cmd = zwave.parse(description, [0x26: 1, 0x2B: 1, 0x80: 1, 0x84: 1])
+		if(cmd) results += zwaveEvent(cmd)
+		if(!results) results = [ descriptionText: cmd, displayed: false ]
+	}
+	log.debug("Parsed '$description' to $results")
+	return results
+}
+
+def on() {
+    sendEvent(name: "switch", value: "on")
+}
+
+def off() {
+    sendEvent(name: "switch", value: "off")
+}
+
+def levelup() {
+	def curlevel = device.currentValue('level') as Integer 
+	if (curlevel <= 90)
+    	setLevel(curlevel + 10);     
+}
+
+def leveldown() {
+	def curlevel = device.currentValue('level') as Integer 
+	if (curlevel >= 10)
+    	setLevel(curlevel - 10)    
+}
+
+def setLevel(value) {
+	log.trace "setLevel($value)"
+	sendEvent(name: "level", value: value) 
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd) {
+	def results = [createEvent(descriptionText: "$device.displayName woke up", isStateChange: false)]
+
+    results += configurationCmds().collect{ response(it) }
+	results << response(zwave.wakeUpV1.wakeUpNoMoreInformation().format())
+
+	return results
+}
+
+// A zwave command for a button press was received convert to button number
+def zwaveEvent(physicalgraph.zwave.commands.switchmultilevelv1.SwitchMultilevelStartLevelChange cmd) {
+	[ descriptionText: "startlevel $cmd"]
+	log.info "startlevel $cmd"
+	if (cmd.upDown == true) {
+		Integer buttonid = 2
+        leveldown()
+		checkbuttonEvent(buttonid)		
+    } else if (cmd.upDown == false) {
+		Integer buttonid = 3
+        levelup()
+		checkbuttonEvent(buttonid)       
+	}
+}
+
+// The controller likes to repeat the command... ignore repeats
+def checkbuttonEvent(buttonid){
+
+	if (state.lastScene == buttonid && (state.repeatCount < 4) && (now() - state.repeatStart < 2000)) {
+    	log.debug "Button ${buttonid} repeat ${state.repeatCount}x ${now()}"
+        state.repeatCount = state.repeatCount + 1
+        createEvent([:])
+    }
+    else {
+    	// If the button was really pressed, store the new scene and handle the button press
+        state.lastScene = buttonid
+        state.lastLevel = 0
+        state.repeatCount = 0
+        state.repeatStart = now()
+
+        buttonEvent(buttonid)
+    }
+}
+
+// Handle a button being pressed
+def buttonEvent(button) {
+	button = button as Integer
+    log.trace "Button $button pressed"
+    def result = []
+	if (button == 1) {
+    	def mystate = device.currentValue('switch');
+        if (mystate == "on") 
+            off()
+        else
+            on()   
+    }
+    updateState("currentButton", "$button")   
+        // update the device state, recording the button press
+        result << createEvent(name: "button", value: "pushed", data: [buttonNumber: button], descriptionText: "$device.displayName button $button was pushed", isStateChange: true)
+    result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicGet cmd) {
+    [ descriptionText: "$cmd"]
+    if(1){
+		Integer buttonid = 1
+		checkbuttonEvent(buttonid)
+    }
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd) {
+	[ descriptionText: "$cmd"]
+    if(1){
+		Integer buttonid = 1
+        log.info "button $buttonid pressed"
+		checkbuttonEvent(buttonid)
+    }
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.switchmultilevelv1.SwitchMultilevelStopLevelChange cmd) {
+        createEvent([:])
+}
+
+
+def zwaveEvent(physicalgraph.zwave.Command cmd) {
+	[ descriptionText: "$cmd"]
+}
+
+// Update State
+def updateState(String name, String value) {
+	state[name] = value
+	device.updateDataValue(name, value)
+}