Initial commit

2026-03-18 05:10:52 +00:00 · 2015-08-04 15:49:03 -07:00
commit 6ad3c4fd7a
322 changed files with 67201 additions and 0 deletions
--- a/devicetypes/smartthings/dimmer-switch.src/dimmer-switch.groovy
+++ b/devicetypes/smartthings/dimmer-switch.src/dimmer-switch.groovy
@@ -0,0 +1,222 @@
+/**
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Dimmer Switch", namespace: "smartthings", author: "SmartThings") {
+		capability "Switch Level"
+		capability "Actuator"
+		capability "Indicator"
+		capability "Switch"
+		capability "Polling"
+		capability "Refresh"
+		capability "Sensor"
+
+		fingerprint inClusters: "0x26"
+	}
+
+	simulator {
+		status "on":  "command: 2003, payload: FF"
+		status "off": "command: 2003, payload: 00"
+		status "09%": "command: 2003, payload: 09"
+		status "10%": "command: 2003, payload: 0A"
+		status "33%": "command: 2003, payload: 21"
+		status "66%": "command: 2003, payload: 42"
+		status "99%": "command: 2003, payload: 63"
+
+		// reply messages
+		reply "2001FF,delay 5000,2602": "command: 2603, payload: FF"
+		reply "200100,delay 5000,2602": "command: 2603, payload: 00"
+		reply "200119,delay 5000,2602": "command: 2603, payload: 19"
+		reply "200132,delay 5000,2602": "command: 2603, payload: 32"
+		reply "20014B,delay 5000,2602": "command: 2603, payload: 4B"
+		reply "200163,delay 5000,2602": "command: 2603, payload: 63"
+	}
+
+	tiles {
+		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
+			state "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
+			state "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
+			state "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
+			state "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
+		}
+		standardTile("indicator", "device.indicatorStatus", inactiveLabel: false, decoration: "flat") {
+			state "when off", action:"indicator.indicatorWhenOn", icon:"st.indicators.lit-when-off"
+			state "when on", action:"indicator.indicatorNever", icon:"st.indicators.lit-when-on"
+			state "never", action:"indicator.indicatorWhenOff", icon:"st.indicators.never-lit"
+		}
+		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
+			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+		controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 3, inactiveLabel: false) {
+			state "level", action:"switch level.setLevel"
+		}
+
+		main(["switch"])
+		details(["switch", "refresh", "indicator", "levelSliderControl"])
+	}
+}
+
+def parse(String description) {
+	def item1 = [
+		canBeCurrentState: false,
+		linkText: getLinkText(device),
+		isStateChange: false,
+		displayed: false,
+		descriptionText: description,
+		value:  description
+	]
+	def result
+	def cmd = zwave.parse(description, [0x20: 1, 0x26: 1, 0x70: 1])
+	if (cmd) {
+		result = createEvent(cmd, item1)
+	}
+	else {
+		item1.displayed = displayed(description, item1.isStateChange)
+		result = [item1]
+	}
+	log.debug "Parse returned ${result?.descriptionText}"
+	result
+}
+
+def createEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd, Map item1) {
+	def result = doCreateEvent(cmd, item1)
+	for (int i = 0; i < result.size(); i++) {
+		result[i].type = "physical"
+	}
+	result
+}
+
+def createEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd, Map item1) {
+	def result = doCreateEvent(cmd, item1)
+	for (int i = 0; i < result.size(); i++) {
+		result[i].type = "physical"
+	}
+	result
+}
+
+def createEvent(physicalgraph.zwave.commands.switchmultilevelv1.SwitchMultilevelStartLevelChange cmd, Map item1) {
+	[]
+}
+
+def createEvent(physicalgraph.zwave.commands.switchmultilevelv1.SwitchMultilevelStopLevelChange cmd, Map item1) {
+	[response(zwave.basicV1.basicGet())]
+}
+
+def createEvent(physicalgraph.zwave.commands.switchmultilevelv1.SwitchMultilevelSet cmd, Map item1) {
+	def result = doCreateEvent(cmd, item1)
+	for (int i = 0; i < result.size(); i++) {
+		result[i].type = "physical"
+	}
+	result
+}
+
+def createEvent(physicalgraph.zwave.commands.switchmultilevelv1.SwitchMultilevelReport cmd, Map item1) {
+	def result = doCreateEvent(cmd, item1)
+	result[0].descriptionText = "${item1.linkText} is ${item1.value}"
+	result[0].handlerName = cmd.value ? "statusOn" : "statusOff"
+	for (int i = 0; i < result.size(); i++) {
+		result[i].type = "digital"
+	}
+	result
+}
+
+def doCreateEvent(physicalgraph.zwave.Command cmd, Map item1) {
+	def result = [item1]
+
+	item1.name = "switch"
+	item1.value = cmd.value ? "on" : "off"
+	item1.handlerName = item1.value
+	item1.descriptionText = "${item1.linkText} was turned ${item1.value}"
+	item1.canBeCurrentState = true
+	item1.isStateChange = isStateChange(device, item1.name, item1.value)
+	item1.displayed = item1.isStateChange
+
+	if (cmd.value >= 5) {
+		def item2 = new LinkedHashMap(item1)
+		item2.name = "level"
+		item2.value = cmd.value as String
+		item2.unit = "%"
+		item2.descriptionText = "${item1.linkText} dimmed ${item2.value} %"
+		item2.canBeCurrentState = true
+		item2.isStateChange = isStateChange(device, item2.name, item2.value)
+		item2.displayed = false
+		result << item2
+	}
+	result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.configurationv1.ConfigurationReport cmd) {
+	def value = "when off"
+	if (cmd.configurationValue[0] == 1) {value = "when on"}
+	if (cmd.configurationValue[0] == 2) {value = "never"}
+	[name: "indicatorStatus", value: value, display: false]
+}
+
+def createEvent(physicalgraph.zwave.Command cmd,  Map map) {
+	// Handles any Z-Wave commands we aren't interested in
+	log.debug "UNHANDLED COMMAND $cmd"
+}
+
+def on() {
+	log.info "on"
+	delayBetween([zwave.basicV1.basicSet(value: 0xFF).format(), zwave.switchMultilevelV1.switchMultilevelGet().format()], 5000)
+}
+
+def off() {
+	delayBetween ([zwave.basicV1.basicSet(value: 0x00).format(), zwave.switchMultilevelV1.switchMultilevelGet().format()], 5000)
+}
+
+def setLevel(value) {
+	def valueaux = value as Integer
+	def level = Math.min(valueaux, 99)
+	delayBetween ([zwave.basicV1.basicSet(value: level).format(), zwave.switchMultilevelV1.switchMultilevelGet().format()], 5000)
+}
+
+def setLevel(value, duration) {
+	def valueaux = value as Integer
+	def level = Math.min(valueaux, 99)
+	def dimmingDuration = duration < 128 ? duration : 128 + Math.round(duration / 60)
+	zwave.switchMultilevelV2.switchMultilevelSet(value: level, dimmingDuration: dimmingDuration).format()
+}
+
+def poll() {
+	zwave.switchMultilevelV1.switchMultilevelGet().format()
+}
+
+def refresh() {
+	zwave.switchMultilevelV1.switchMultilevelGet().format()
+}
+
+def indicatorWhenOn() {
+	sendEvent(name: "indicatorStatus", value: "when on", display: false)
+	zwave.configurationV1.configurationSet(configurationValue: [1], parameterNumber: 3, size: 1).format()
+}
+
+def indicatorWhenOff() {
+	sendEvent(name: "indicatorStatus", value: "when off", display: false)
+	zwave.configurationV1.configurationSet(configurationValue: [0], parameterNumber: 3, size: 1).format()
+}
+
+def indicatorNever() {
+	sendEvent(name: "indicatorStatus", value: "never", display: false)
+	zwave.configurationV1.configurationSet(configurationValue: [2], parameterNumber: 3, size: 1).format()
+}
+
+def invertSwitch(invert=true) {
+	if (invert) {
+		zwave.configurationV1.configurationSet(configurationValue: [1], parameterNumber: 4, size: 1).format()
+	}
+	else {
+		zwave.configurationV1.configurationSet(configurationValue: [0], parameterNumber: 4, size: 1).format()
+	}
+}