From 741dd366897a44344638d9104d7b981d37a6323b Mon Sep 17 00:00:00 2001
From: Aquilino Wong <aquipower@gmail.com>
Date: Fri, 16 Sep 2016 16:31:28 -0500
Subject: [PATCH] MSA-1476: Centralite HA thermostat.  Works perfectly, able to
 see temperature, control it, fan, heat, on and off,hold.  I didnt make this
 code, i want this to be published for everybody who has twc or comcast
 intelligent home.  They use this type of device and you can convert them to
 smartthings.

---
 .../zigbee-centralite-thermostat.groovy       | 630 ++++++++++++++++++
 1 file changed, 630 insertions(+)
 create mode 100644 devicetypes/smartthings/zigbee-centralite-thermostat.src/zigbee-centralite-thermostat.groovy

diff --git a/devicetypes/smartthings/zigbee-centralite-thermostat.src/zigbee-centralite-thermostat.groovy b/devicetypes/smartthings/zigbee-centralite-thermostat.src/zigbee-centralite-thermostat.groovy
new file mode 100644
index 0000000..99382ef
--- /dev/null
+++ b/devicetypes/smartthings/zigbee-centralite-thermostat.src/zigbee-centralite-thermostat.groovy
@@ -0,0 +1,630 @@
+/**
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ *	Author: SmartThings
+ *	Date: 2013-12-02
+ */
+metadata {
+	definition (name: "ZigBee CentraLite Thermostat", namespace: "smartthings", author: "SmartThings") {
+		capability "Actuator"
+		capability "Temperature Measurement"
+		capability "Thermostat"
+		capability "Configuration"
+		capability "Refresh"
+		capability "Sensor"
+		capability "Polling"
+		capability "Battery"
+		
+
+		// Custom commands 
+        command "raiseHeatLevel"
+		command "lowHeatLevel"
+		command "raiseCoolLevel"
+		command "lowCoolLevel"
+		command "setTemperature"
+		command "setThermostatHoldMode"
+		command "getPowerSource"
+
+		attribute "temperatureScale", "string"
+		attribute "thermostatHoldMode", "string"
+		attribute "powerSource", "string"
+		
+		fingerprint profileId: "0104", inClusters: "0000,0001,0003,0020,0201,0202,0204,0B05", outClusters: "000A, 0019"
+	}
+
+	// simulator metadata
+	simulator { }
+
+	tiles(scale: 2) {
+	
+        multiAttributeTile(name:"summary", type: "thermostat", width: 6, height: 4) {
+        	tileAttribute("device.temperature", key: "PRIMARY_CONTROL") {
+				attributeState("temperature", label:'${currentValue}°', unit:"dF",
+				backgroundColors:[
+                		// Celsius Color Range
+						[value: 0, color: "#153591"],
+						[value: 7, color: "#1e9cbb"],
+						[value: 15, color: "#90d2a7"],
+						[value: 23, color: "#44b621"],
+						[value: 29, color: "#f1d801"],
+                    	[value: 33, color: "#d04e00"],
+						[value: 36, color: "#bc2323"],
+						// Fahrenheit Color Range
+						[value: 40, color: "#153591"],
+						[value: 44, color: "#1e9cbb"],
+						[value: 59, color: "#90d2a7"],
+                        [value: 65, color: "#99ff33"],
+						[value: 74, color: "#44b621"],
+						[value: 84, color: "#f1d801"],
+						[value: 92, color: "#d04e00"],
+						[value: 96, color: "#bc2323"]
+					])
+			}
+			tileAttribute("device.temperature", key: "VALUE_CONTROL") {
+                attributeState("default", action: "setTemperature")
+			}
+            
+			tileAttribute("device.powerSource", key: "SECONDARY_CONTROL") {
+				attributeState("default", label:'PowerSrc: ${currentValue}')
+			}            
+			
+            tileAttribute("device.heatingSetpoint", key: "HEATING_SETPOINT") {
+            	attributeState("default", label:'${currentValue}', unit:"dF")
+            }
+			tileAttribute("device.coolingSetpoint", key: "COOLING_SETPOINT") {
+				attributeState("default", label:'${currentValue}', unit:"dF")
+			}
+ 		}
+		
+		valueTile("temperature", "device.temperature", width: 2, height: 2) {
+			state("temperature", label:'${currentValue}°', unit:"",
+				backgroundColors:[
+                		// Celsius Color Range
+						[value: 0, color: "#153591"],
+						[value: 7, color: "#1e9cbb"],
+						[value: 15, color: "#90d2a7"],
+						[value: 23, color: "#44b621"],
+						[value: 29, color: "#f1d801"],
+                    	[value: 33, color: "#d04e00"],
+						[value: 36, color: "#bc2323"],
+						// Fahrenheit Color Range
+						[value: 40, color: "#153591"],
+						[value: 44, color: "#1e9cbb"],
+						[value: 59, color: "#90d2a7"],
+                        [value: 65, color: "#99ff33"],
+						[value: 74, color: "#44b621"],
+						[value: 84, color: "#f1d801"],
+						[value: 92, color: "#d04e00"],
+						[value: 96, color: "#bc2323"]
+				]
+			)
+		}
+
+		standardTile("mode", "device.thermostatMode", height: 2, width: 2, inactiveLabel: false, canChangeIcon: false) {
+			state "off", label:'', action:"thermostat.setThermostatMode", icon: "st.thermostat.heating-cooling-off"
+			state "cool", label:'', action:"thermostat.setThermostatMode", icon: "st.thermostat.cool", backgroundColor: '#99ddff'
+			state "heat", label:'', action:"thermostat.setThermostatMode", icon: "st.thermostat.heat", backgroundColor: '#fd631c'
+			state "emergencyHeat", label:'', action:"thermostat.setThermostatMode", icon: "st.thermostat.emergency-heat", backgroundColor: '#E11102'
+			//state "auto", label:'', action:"thermostat.setThermostatMode", icon: "st.thermostat.auto", backgroundColor: '#ffff00'
+		}
+		
+		standardTile("fanMode", "device.thermostatFanMode", height: 2, width: 2, inactiveLabel: false, canChangeIcon: false) {
+			state "fanAuto", label:'', action:"thermostat.setThermostatFanMode", icon: "st.thermostat.fan-auto", backgroundColor: '#ffff00'
+			state "fanOn", label:'', action:"thermostat.setThermostatFanMode", icon: "st.thermostat.fan-on", backgroundColor: '#ffff00'
+		}
+
+		standardTile("holdMode", "device.thermostatHoldMode", height: 2, width: 2, inactiveLabel: false, canChangeIcon: false) {
+			state "holdOff", label:'Hold Off', action:"setThermostatHoldMode", icon: "st.Lighting.light13", backgroundColor:"#ffffff", nextState:"holdOff"
+			state "holdOn", label:'Hold On', action:"setThermostatHoldMode", icon: "st.Lighting.light11", backgroundColor:"#ffb3ff", nextState:"holdOn"
+		}
+		
+        standardTile("raiseHeatLevel", "device.heatingSetpoint", canChangeIcon: false, , height: 0.5, width: 0.5, inactiveLabel: false, decoration: "flat") {
+            state "raiseHeatLevel", label:'  ', action:"raiseHeatLevel", icon:"st.thermostat.thermostat-up"
+        }
+		valueTile("heatingSetpoint", "device.heatingSetpoint", height: 1, width: 2, inactiveLabel: false, decoration: "flat") {
+			state "heat", label:'${currentValue}° Heat', unit:"", backgroundColor:"#fd631c"
+		}
+        standardTile("lowHeatLevel", "device.heatingSetpoint", canChangeIcon: false, , height: 0.5, width: 0.5, inactiveLabel: false, decoration: "flat") {
+            state "lowHeatLevel", label:'  ', action:"lowHeatLevel", icon:"st.thermostat.thermostat-down"
+        }
+		controlTile("heatSliderControl", "device.heatingSetpoint", "slider", height: 1, width: 4, inactiveLabel: false) {
+			state "setHeatingSetpoint", action:"thermostat.setHeatingSetpoint", backgroundColor:"#d04e00"
+		}
+
+        standardTile("raiseCoolLevel", "device.heatingSetpoint", canChangeIcon: false, , height: 0.5, width: 0.5, inactiveLabel: false, decoration: "flat") {
+            state "raiseCoolLevel", label:'  ', action:"raiseCoolLevel", icon:"st.thermostat.thermostat-up"
+        }
+ 		valueTile("coolingSetpoint", "device.coolingSetpoint", , height: 1, width: 2, inactiveLabel: false, decoration: "flat") {
+			state "cool", label:'${currentValue}° Cool', unit:"", backgroundColor:"#66ccff"
+		}
+        standardTile("lowCoolLevel", "device.heatingSetpoint", canChangeIcon: false, , height: 0.5, width: 0.5, inactiveLabel: false, decoration: "flat") {
+            state "lowCoolLevel", label:'  ', action:"lowCoolLevel", icon:"st.thermostat.thermostat-down"
+        }
+		controlTile("coolSliderControl", "device.coolingSetpoint", "slider", height: 1, width: 4, inactiveLabel: false) {
+			state "setCoolingSetpoint", action:"thermostat.setCoolingSetpoint", backgroundColor: "#003CEC"
+		}
+
+		standardTile("refresh", "device.temperature", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
+			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+		standardTile("configure", "device.configure", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
+			state "configure", label:'', action:"configuration.configure", icon:"st.secondary.configure"
+		}
+		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
+			state "battery", label:'${currentValue}% Battery', unit:""
+		}
+		main(["temperature", "summary"])
+		details(["summary", "holdMode", "mode", "fanMode", "heatSliderControl", "heatingSetpoint", "coolSliderControl",  "coolingSetpoint", "battery", "refresh"])
+	}
+}
+
+
+def setTemperature(setpoint) {
+	log.debug "setTemperature() called with setpoint ${setpoint}. "
+ 	log.debug "Current temperature: ${device.currentValue("temperature")}. Heat Setpoint: ${device.currentValue("heatingSetpoint")}. Cool Setpoint: ${device.currentValue("coolingSetpoint")}"
+   
+    def mode = device.currentValue("thermostatMode")
+    def midpoint
+	def targetvalue
+
+	if (mode == "off") {
+		log.warn "setTemperature(): this mode: $mode does not allow raiseSetpoint"
+        return
+    } 
+    
+    def currentTemp = device.currentValue("temperature")
+    def deltaTemp = setpoint - currentTemp
+    
+    log.debug "deltaTemp = ${deltaTemp}"
+    
+    if (mode == "heat") {
+    	// Change the heat
+        log.debug "setTemperature(): change the heat temp"
+		 if (deltaTemp < 0) {
+			lowHeatLevel()
+        } else if (deltaTemp > 0) {
+			raiseHeatLevel()
+		}
+    } else if (mode == "cool") {
+    	// Change the cool
+        log.debug "setTemperature(): change the cool temp"
+		 if (deltaTemp < 0) {
+			lowCoolLevel()
+        } else if (deltaTemp > 0) {
+			raiseCoolLevel()
+		}
+    }
+}
+
+
+def raiseHeatLevel(){
+
+    def mode = device.currentValue("thermostatMode")
+
+ 	if (mode == "off") {
+		log.warn "raiseHeatLevel(): this mode: $mode does not allow raiseHeatLevel"
+	} else {
+		def locationScale = getTemperatureScale()
+		def maxTemp
+		def minTemp
+		if (locationScale == "C") {
+			maxTemp = 44 // Max Temp in C
+			minTemp = 7 // Min Temp in C
+			log.trace "Location is in Celsius, MaxTemp: $maxTemp, MinTemp: $minTemp"
+		} else {
+			maxTemp = 86 // Max temp in F
+			minTemp = 30 // Max temp in F
+			log.trace "Location is in Farenheit, MaxTemp: $maxTemp, MinTemp: $minTemp"
+		}
+		
+		def currentLevel = device.currentValue("heatingSetpoint")
+		int nextLevel = currentLevel.toInteger() + 1
+    
+		if( nextLevel > maxTemp){
+			nextLevel = maxTemp
+		}
+		log.debug "Setting heat set point up to: ${nextLevel}"
+		setHeatingSetpoint(nextLevel)
+	}
+}
+
+def lowHeatLevel(){
+ 	if (mode == "off") {
+		log.warn "lowHeatLevel(): this mode: $mode does not allow lowHeatLevel"
+	} else {
+		def locationScale = getTemperatureScale()
+		def maxTemp
+		def minTemp
+		if (locationScale == "C") {
+			maxTemp = 44 // Max Temp in C
+			minTemp = 7 // Min Temp in C
+			log.trace "Location is in Celsius, MaxTemp: $maxTemp, MinTemp: $minTemp"
+		} else {
+			maxTemp = 86 // Max temp in F
+			minTemp = 30 // Max temp in F
+			log.trace "Location is in Farenheit, MaxTemp: $maxTemp, MinTemp: $minTemp"
+		}
+
+		def currentLevel = device.currentValue("heatingSetpoint")
+		int nextLevel = currentLevel.toInteger() - 1
+    
+		if( nextLevel < minTemp){
+			nextLevel = minTemp
+		}
+		log.debug "Setting heat set point down to: ${nextLevel}"
+		setHeatingSetpoint(nextLevel)
+	}
+}
+
+def raiseCoolLevel(){
+ 	if (mode == "off") {
+		log.warn "raiseCoolLevel(): this mode: $mode does not allow raiseCoolLevel"
+	} else {
+		def locationScale = getTemperatureScale()
+		def maxTemp
+		def minTemp
+		if (locationScale == "C") {
+			maxTemp = 44 // Max Temp in C
+			minTemp = 7 // Min Temp in C
+			log.trace "Location is in Celsius, MaxTemp: $maxTemp, MinTemp: $minTemp"
+		} else {
+			maxTemp = 86 // Max temp in F
+			minTemp = 30 // Max temp in F
+			log.trace "Location is in Farenheit, MaxTemp: $maxTemp, MinTemp: $minTemp"
+		}
+
+		def currentLevel = device.currentValue("coolingSetpoint")
+		int nextLevel = currentLevel.toInteger() + 1
+   
+		if( nextLevel > maxTemp){
+			nextLevel = maxTemp
+		}
+		log.debug "Setting cool set point up to: ${nextLevel}"
+		setCoolingSetpoint(nextLevel)
+	}
+}
+
+def lowCoolLevel(){
+ 	if (mode == "off") {
+		log.warn "lowCoolLevel(): this mode: $mode does not allow lowCoolLevel"
+	} else {
+		def locationScale = getTemperatureScale()
+		def maxTemp
+		def minTemp
+		if (locationScale == "C") {
+			maxTemp = 44 // Max Temp in C
+			minTemp = 7 // Min Temp in C
+			log.trace "Location is in Celsius, MaxTemp: $maxTemp, MinTemp: $minTemp"
+		} else {
+			maxTemp = 86 // Max temp in F
+			minTemp = 30 // Max temp in F
+			log.trace "Location is in Farenheit, MaxTemp: $maxTemp, MinTemp: $minTemp"
+		}
+
+		def currentLevel = device.currentValue("coolingSetpoint")
+		int nextLevel = currentLevel.toInteger() - 1
+    
+		if( nextLevel < minTemp){
+			nextLevel = minTemp
+		}
+		log.debug "Setting cool set point down to: ${nextLevel}"
+		setCoolingSetpoint(nextLevel)
+	}
+}
+
+
+
+
+// parse events into attributes
+def parse(String description) {
+	log.debug "Parse description $description"
+	def map = [:]
+	if (description?.startsWith("read attr -")) {
+		def descMap = parseDescriptionAsMap(description)
+		log.debug "Desc Map: $descMap"
+		if (descMap.cluster == "0201" && descMap.attrId == "0000") {
+			log.debug "TEMP"
+			map.name = "temperature"
+			map.value = getTemperature(descMap.value)
+		} else if (descMap.cluster == "0201" && descMap.attrId == "0011") {
+			log.debug "COOLING SETPOINT"
+			map.name = "coolingSetpoint"
+			map.value = getTemperature(descMap.value)
+		} else if (descMap.cluster == "0201" && descMap.attrId == "0012") {
+			log.debug "HEATING SETPOINT"
+			map.name = "heatingSetpoint"
+			map.value = getTemperature(descMap.value)
+		} else if (descMap.cluster == "0201" && descMap.attrId == "001c") {
+			log.debug "MODE"
+			map.name = "thermostatMode"
+			map.value = getModeMap()[descMap.value]
+		} else if (descMap.cluster == "0202" && descMap.attrId == "0000") {
+			log.debug "FAN MODE"
+			map.name = "thermostatFanMode"
+			map.value = getFanModeMap()[descMap.value]
+		} else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
+		    log.debug "BATTERY"
+			map.name = "battery"
+			map.value = getBatteryLevel(descMap.value)
+		} else if (descMap.cluster == "0201" && descMap.attrId == "001e") {
+		    log.debug "RUN MODE"
+			map.name = "thermostatRunMode"
+			//map.value = getRunModeMap()[descMap.value]
+			map.value = getThermostatRunMode(descMap.value)
+		} else if (descMap.cluster == "0201" && descMap.attrId == "0023") {
+		    log.debug "HOLD MODE"
+			map.name = "thermostatHoldMode"
+			map.value = getHoldModeMap()[descMap.value]			
+		} else if (descMap.cluster == "0000" && descMap.attrId == "0007") {
+		    log.debug "Power Source"
+			map.name = "powerSource"
+			map.value = getPowerSource()[descMap.value]			
+		}
+	}
+
+	def result = null
+	if (map) {
+		result = createEvent(map)
+	}
+	log.debug "Parse returned $map"
+	return result
+}
+
+def parseDescriptionAsMap(description) {
+	(description - "read attr - ").split(",").inject([:]) { map, param ->
+		def nameAndValue = param.split(":")
+		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
+	}
+}
+
+def getModeMap() { [
+	"00":"off",
+    //"01":"auto",
+	"03":"cool",
+	"04":"heat",
+	"05":"emergencyHeat"
+]}
+
+def getHoldModeMap() { [
+	"00":"holdOff",
+	"01":"holdOn",
+]}
+
+def getPowerSource() { [
+	"01":"24VAC",
+	"03":"Battery",
+]}
+
+
+def getFanModeMap() { [
+	"04":"fanOn",
+	"05":"fanAuto"
+]}
+
+
+def getThermostatRunMode(value) {
+	if (value != null) {
+	    def RunModeValue = Integer.parseInt(value, 16)
+		log.debug "Thermostat RunMode: ${RunModeValue} "
+	}
+}
+
+
+def getTemperature(value) {
+	if (value != null) {
+		def celsius = Integer.parseInt(value, 16) / 100
+		if (getTemperatureScale() == "C") {
+			return celsius
+		} else {
+			return Math.round(celsiusToFahrenheit(celsius))			
+		}
+	}
+}
+
+def setHeatingSetpoint(degrees) {
+	if (degrees != null) {
+		def temperatureScale = getTemperatureScale()
+
+		def degreesInteger = Math.round(degrees)
+		log.debug "setHeatingSetpoint({$degreesInteger} ${temperatureScale})"
+		sendEvent("name": "heatingSetpoint", "value": degreesInteger)
+
+		def celsius = (getTemperatureScale() == "C") ? degreesInteger : (fahrenheitToCelsius(degreesInteger) as Double).round(2)
+		"st wattr 0x${device.deviceNetworkId} 1 0x201 0x12 0x29 {" + hex(celsius * 100) + "}"
+	}
+}
+
+def setCoolingSetpoint(degrees) {
+	if (degrees != null) {
+		def degreesInteger = Math.round(degrees)
+		log.debug "setCoolingSetpoint({$degreesInteger} ${temperatureScale})"
+		sendEvent("name": "coolingSetpoint", "value": degreesInteger)
+		def celsius = (getTemperatureScale() == "C") ? degreesInteger : (fahrenheitToCelsius(degreesInteger) as Double).round(2)
+		"st wattr 0x${device.deviceNetworkId} 1 0x201 0x11 0x29 {" + hex(celsius * 100) + "}"
+	}
+}
+
+def modes() {
+	["off", "cool", "heat", "emergencyHeat"]
+}
+
+def setThermostatMode() {
+	log.debug "switching thermostatMode"
+	def currentMode = device.currentState("thermostatMode")?.value
+	def modeOrder = modes()
+    log.debug "modeOrder: ${modeOrder}"
+	def index = modeOrder.indexOf(currentMode)
+    log.debug "index: ${index}"
+    def next = index >= 0 && index < modeOrder.size() - 1 ? modeOrder[index + 1] : modeOrder[0]
+	log.debug "switching mode from $currentMode to $next"
+	"$next"()
+}
+
+def setThermostatFanMode() {
+	log.debug "Switching fan mode"
+	def currentFanMode = device.currentState("thermostatFanMode")?.value
+	log.debug "switching fan from current mode: $currentFanMode"
+	def returnCommand
+
+	switch (currentFanMode) {
+		case "fanAuto":
+			returnCommand = fanOn()
+			break
+		case "fanOn":
+			returnCommand = fanAuto()
+			break
+	}
+	if(!currentFanMode) { returnCommand = fanAuto() }
+	returnCommand
+}
+
+
+def setThermostatHoldMode() {
+	log.debug "Switching Hold mode"
+	def currentHoldMode = device.currentState("thermostatHoldMode")?.value
+	log.debug "switching thermostat from current mode: $currentHoldMode"
+	def returnCommand
+
+	switch (currentHoldMode) {
+		case "holdOff":
+			returnCommand = holdOn()
+			break
+		case "holdOn":
+			returnCommand = holdOff()
+			break
+	}
+	if(!currentHoldMode) { returnCommand = holdOff() }
+	returnCommand
+}
+
+def setThermostatMode(String value) {
+	log.debug "setThermostatMode({$value})"
+	"$value"()
+}
+
+def setThermostatFanMode(String value) {
+	log.debug "setThermostatFanMode({$value})"
+	"$value"()
+}
+
+def setThermostatHoldMode(String value) {
+	log.debug "setThermostatHoldMode({$value})"
+	"$value"()
+}
+
+
+def off() {
+	log.debug "off"
+	sendEvent("name":"thermostatMode", "value":"off")
+	"st wattr 0x${device.deviceNetworkId} 1 0x201 0x1C 0x30 {00}"
+}
+
+def cool() {
+	log.debug "cool"
+	sendEvent("name":"thermostatMode", "value":"cool")
+	"st wattr 0x${device.deviceNetworkId} 1 0x201 0x1C 0x30 {03}"
+}
+
+def heat() {
+	log.debug "heat"
+	sendEvent("name":"thermostatMode", "value":"heat")
+	"st wattr 0x${device.deviceNetworkId} 1 0x201 0x1C 0x30 {04}"
+}
+
+def emergencyHeat() {
+	log.debug "emergencyHeat"
+	sendEvent("name":"thermostatMode", "value":"emergencyHeat")
+	"st wattr 0x${device.deviceNetworkId} 1 0x201 0x1C 0x30 {05}"
+}
+
+def on() {
+	fanOn()
+}
+
+def fanOn() {
+	log.debug "fanOn"
+	sendEvent("name":"thermostatFanMode", "value":"fanOn")
+	"st wattr 0x${device.deviceNetworkId} 1 0x202 0 0x30 {04}"
+}
+
+def auto() {
+	fanAuto()
+}
+
+def fanAuto() {
+	log.debug "fanAuto"
+	sendEvent("name":"thermostatFanMode", "value":"fanAuto")
+	"st wattr 0x${device.deviceNetworkId} 1 0x202 0 0x30 {05}"
+}
+
+def holdOn() {
+	log.debug "Set Hold On for thermostat"
+	sendEvent("name":"thermostatHoldMode", "value":"holdOn")
+	"st wattr 0x${device.deviceNetworkId} 1 0x201 0x23 0x30 {01}"
+}
+
+def holdOff() {
+	log.debug "Set Hold Off for thermostat"
+	sendEvent("name":"thermostatHoldMode", "value":"holdOff")
+	"st wattr 0x${device.deviceNetworkId} 1 0x201 0x23 0x30 {00}"
+}
+
+// Commment out below if no C-wire since it will kill the batteries.
+def poll() {
+//	log.debug "Executing 'poll'"
+	refresh()
+}
+
+
+def configure() {
+
+	log.debug "binding to Thermostat and Fan Control cluster"
+	[
+		"zdo bind 0x${device.deviceNetworkId} 1 1 0x000 {${device.zigbeeId}} {}", "delay 200",
+		"zdo bind 0x${device.deviceNetworkId} 1 1 0x201 {${device.zigbeeId}} {}", "delay 200",
+		"zdo bind 0x${device.deviceNetworkId} 1 1 0x202 {${device.zigbeeId}} {}", "delay 200",
+		
+		"zcl global send-me-a-report 1 0x20 0x20 3600 86400 {01}", "delay 100", //battery report request
+		"send 0x${device.deviceNetworkId} 1 1", "delay 200"
+	]
+}
+
+
+def refresh()
+{
+	log.debug "refresh called"
+	[
+		"st rattr 0x${device.deviceNetworkId} 1 0x000 0x07", "delay 200",
+		"st rattr 0x${device.deviceNetworkId} 1 0x201 0", "delay 200",
+		"st rattr 0x${device.deviceNetworkId} 1 0x201 0x11", "delay 200",
+  		"st rattr 0x${device.deviceNetworkId} 1 0x201 0x12", "delay 200",
+		"st rattr 0x${device.deviceNetworkId} 1 0x201 0x1C", "delay 200",
+		"st rattr 0x${device.deviceNetworkId} 1 0x201 0x1E", "delay 200",
+		"st rattr 0x${device.deviceNetworkId} 1 0x201 0x23", "delay 200",
+		"st rattr 0x${device.deviceNetworkId} 1 0x001 0x20", "delay 200",
+		"st rattr 0x${device.deviceNetworkId} 1 0x202 0"
+	] + configure()
+}
+
+
+private getBatteryLevel(rawValue) {
+	def intValue = Integer.parseInt(rawValue,16)
+	def min = 2.1
+    def max = 3.0
+    def vBatt = intValue / 10
+    return ((vBatt - min) / (max - min) * 100) as int
+}
+
+
+private hex(value) {
+	new BigInteger(Math.round(value).toString()).toString(16)
+}
\ No newline at end of file