mirror of
https://github.com/mtan93/SmartThingsPublic.git
synced 2026-03-19 13:20:53 +00:00
MSA-1277: I'd like to submit significant capability updates to 2 device handlers widely used in UK (and EU): Fibaro Dimmer 1 and Fibaro Dimmer 2. There are 2 main additions to the original code developed by SmartThings team:
1)Addition of "scene" attribute to enable dimmer devices to emit scene activations to SmartThings hub, which can be listened upon by and reacted to by smartapps. This is a significant capability, which was omitted in the existing device handlers because it allows the use of double and triple clicks, secondary switch single/double/triple clicks to perform additional actions. A good example, when in a bedroom normal clicks to turn on/off lights would control main bedroom lights, while double clicks or clicks of the secondary switch S2 could control small table lights which are connected to SmartThings hub. Other examples can be activating Good Night or Good Morning routines, etc. 2)I also added the full list of hardware parameters for both switches to be controllable directly in the SmartThings App UI - settings of the device. This allows users with no coding skills to modify hardware parameters of Fibaro Dimmers without having to fiddle with any code changes. This also makes it possible to have different configurations for different dimmers by using just one device handler, as opposed to creating multiple copies of it depending on the set of parameters that one needs to set. In addition to extensions of the device handlers I am also submitting a demo smartapp that can be used to subscribe to scene activations of Fibaro Dimmers. Its a very simple app, but one that is necessary to be able to take advantage of newly added functionality of Fibaro Dimmers on SmartThings platform.
This commit is contained in:
Elnar Hajiyev
@@ -0,0 +1,787 @@
|
||||
/**
|
||||
* Copyright 2015 SmartThings
|
||||
*
|
||||
* Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
|
||||
* in compliance with the License. You may obtain a copy of the License at:
|
||||
* http://www.apache.org/licenses/LICENSE-2.0
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
|
||||
* on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
|
||||
* for the specific language governing permissions and limitations under the License.
|
||||
*
|
||||
*/
|
||||
metadata {
|
||||
definition (name: "Fibaro Dimmer 2", namespace: "smartthings", author: "Rajiv, Elnar Hajiyev") {
|
||||
capability "Energy Meter"
|
||||
capability "Actuator"
|
||||
capability "Switch"
|
||||
capability "Power Meter"
|
||||
capability "Polling"
|
||||
capability "Refresh"
|
||||
capability "Sensor"
|
||||
capability "Configuration"
|
||||
capability "Switch Level"
|
||||
|
||||
//Extending Fibaro Dimmer 2 devices with scene attribute
|
||||
attribute "scene", "number"
|
||||
|
||||
command "reset"
|
||||
command "configureAfterSecure"
|
||||
|
||||
fingerprint deviceId: "0x1001", inClusters: "0x5E, 0x20, 0x86, 0x72, 0x26, 0x5A, 0x59, 0x85, 0x73, 0x98, 0x7A, 0x56, 0x70, 0x31, 0x32, 0x8E, 0x60, 0x75, 0x71, 0x27, 0x22, 0xEF, 0x2B"
|
||||
}
|
||||
|
||||
// simulator metadata
|
||||
simulator {
|
||||
status "on": "command: 2003, payload: FF"
|
||||
status "off": "command: 2003, payload: 00"
|
||||
status "09%": "command: 2003, payload: 09"
|
||||
status "10%": "command: 2003, payload: 0A"
|
||||
status "33%": "command: 2003, payload: 21"
|
||||
status "66%": "command: 2003, payload: 42"
|
||||
status "99%": "command: 2003, payload: 63"
|
||||
|
||||
for (int i = 0; i <= 10000; i += 1000) {
|
||||
status "power ${i} W": new physicalgraph.zwave.Zwave().meterV3.meterReport(
|
||||
scaledMeterValue: i, precision: 3, meterType: 4, scale: 2, size: 4).incomingMessage()
|
||||
}
|
||||
for (int i = 0; i <= 100; i += 10) {
|
||||
status "energy ${i} kWh": new physicalgraph.zwave.Zwave().meterV3.meterReport(
|
||||
scaledMeterValue: i, precision: 3, meterType: 0, scale: 0, size: 4).incomingMessage()
|
||||
}
|
||||
|
||||
["FF", "00", "09", "0A", "21", "42", "63"].each { val ->
|
||||
reply "2001$val,delay 100,2602": "command: 2603, payload: $val"
|
||||
}
|
||||
}
|
||||
|
||||
// tile definitions
|
||||
|
||||
tiles(scale: 2) {
|
||||
multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
|
||||
tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
|
||||
attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
|
||||
attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
|
||||
attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
|
||||
attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
|
||||
}
|
||||
tileAttribute ("device.level", key: "SLIDER_CONTROL") {
|
||||
attributeState "level", action:"switch level.setLevel"
|
||||
}
|
||||
}
|
||||
valueTile("power", "device.power", decoration: "flat", width: 2, height: 2) {
|
||||
state "default", label:'${currentValue} W'
|
||||
}
|
||||
valueTile("energy", "device.energy", decoration: "flat", width: 2, height: 2) {
|
||||
state "default", label:'${currentValue} kWh'
|
||||
}
|
||||
standardTile("reset", "device.energy", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
|
||||
state "default", label:'reset kWh', action:"reset"
|
||||
}
|
||||
standardTile("configureAfterSecure", "device.configure", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
|
||||
state "configure", label:'', action:"configureAfterSecure", icon:"st.secondary.configure"
|
||||
}
|
||||
standardTile("refresh", "device.power", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
|
||||
state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
|
||||
}
|
||||
|
||||
main(["switch","power","energy"])
|
||||
details(["switch","power","energy","configureAfterSecure","refresh","reset"])
|
||||
}
|
||||
|
||||
preferences {
|
||||
def paragraph = "GROUP 0 - The Dimmer 2 behavior - Basic functionalities"
|
||||
input name: "param1", type: "number", range: "1..98", defaultValue: "1", required: true,
|
||||
title: paragraph + "\n\n" +
|
||||
"1. Minimum brightness level. " +
|
||||
"This parameter is set automatically during the calibration process. " +
|
||||
"The parameter can be changed manually after the calibration.\n" +
|
||||
"Available settings: 1-98 - percentage level of brightness.\n" +
|
||||
"Default value: 1."
|
||||
|
||||
input name: "param2", type: "number", range: "2..99", defaultValue: "99", required: true,
|
||||
title: "2. Maximum brightness level. " +
|
||||
"This parameter is set automatically during the calibration process. " +
|
||||
"The parameter can be changed manually after the calibration.\n" +
|
||||
"Available settings: 2-99 - percentage level of brightness.\n" +
|
||||
"Default value: 99."
|
||||
|
||||
input name: "param3", type: "number", range: "1..99", defaultValue: "1", required: true,
|
||||
title: "3. Incandescence level of dimmable compact fluorescent lamps. " +
|
||||
"Virtual value set as a percentage level between parameters MIN (1%) and MAX (99%). " +
|
||||
"The Dimmer 2 will set to this value after first switch on. " +
|
||||
"It is required for warming up and switching dimmable compact fluorescent lamps and certain types of light sources.\n" +
|
||||
"Available settings: 1-99 - percentage level of brightness.\n" +
|
||||
"Default value: 1."
|
||||
|
||||
input name: "param4", type: "number", range: "0..255", defaultValue: "0", required: true,
|
||||
title: "4. Incandescence time of dimmable compact fluorescent lamps. " +
|
||||
"This parameter determines the time required for switching compact fluorescent lamps and certain types of light sources. " +
|
||||
"Setting this parameter to 0 will disable the incandescence functionality.\n" +
|
||||
"Available settings: 0-255 (0-25.5s).\n" +
|
||||
"Default value: 0."
|
||||
|
||||
input name: "param5", type: "number", range: "1..99", defaultValue: "1", required: true,
|
||||
title: "5. Automatic control - dimming step size. " +
|
||||
"This parameter defines the percentage value of dimming step during the automatic control.\n" +
|
||||
"Available settings: 1-99 - dimming step percentage value.\n" +
|
||||
"Default value: 1."
|
||||
|
||||
input name: "param6", type: "number", range: "0..255", defaultValue: "1", required: true,
|
||||
title: "6. Automatic control - time of a dimming step. " +
|
||||
"This parameter defines the time of single dimming step set in parameter 5 during the automatic control.\n" +
|
||||
"Available settings: 0-255 (0-2.55s, in 10ms steps).\n" +
|
||||
"Default value: 1."
|
||||
|
||||
input name: "param7", type: "number", range: "1..99", defaultValue: "1", required: true,
|
||||
title: "7. Manual control - dimming step size. " +
|
||||
"This parameter defines the percentage value of dimming step during the manual control.\n" +
|
||||
"Available settings: 1-99 - dimming step percentage value.\n" +
|
||||
"Default value: 1."
|
||||
|
||||
input name: "param8", type: "number", range: "0..255", defaultValue: "5", required: true,
|
||||
title: "8. Manual control - time of a dimming step. " +
|
||||
"This parameter defines the time of single dimming step set in parameter 7 during the manual control.\n" +
|
||||
"Available settings: 0-255 (0-2.55s, in 10ms steps).\n" +
|
||||
"Default value: 5."
|
||||
|
||||
input name: "param9", type: "number", range: "0..1", defaultValue: "1", required: true,
|
||||
title: "9. State of the device after a power failure. " +
|
||||
"The Dimmer 2 will return to the last state before power failure.\n" +
|
||||
"Available settings:\n" +
|
||||
"0 = the Dimmer 2 does not save the state before a power failure, it returns to „off” position,\n" +
|
||||
"1 = the Dimmer 2 restores its state before power failure.\n" +
|
||||
"Default value: 1."
|
||||
|
||||
input name: "param10", type: "number", range: "0..32767", defaultValue: "0", required: true,
|
||||
title: "10. Timer functionality (auto - off). " +
|
||||
"This parameter allows to automatically switch off the device after specified time from switching on the light source. " +
|
||||
"It may be useful when the Dimmer 2 is installed in the stairway.\n" +
|
||||
"Available settings: 0 - Function disabled,\n1-32767 - time to turn off measured in seconds (1s-9.1h).\n" +
|
||||
"Default value: 0."
|
||||
|
||||
input name: "param11", type: "enum", defaultValue: "255", required: true,
|
||||
options: ["0" : "0",
|
||||
"1" : "1",
|
||||
"2" : "2",
|
||||
"255" : "255"],
|
||||
title: "11. ALL ON/ALL OFF function. " +
|
||||
"Parameter allows for activation/deactivation of Z-Wave commands enabling/disabling all devices located in direct range of the main controller.\n" +
|
||||
"Available settings:\n" +
|
||||
"0 = All ON not active, All OFF not active,\n" +
|
||||
"1 = All ON not active, All OFF active,\n" +
|
||||
"2 = All ON active, All OFF not active,\n" +
|
||||
"255 = All ON active, All OFF active.\n" +
|
||||
"Default value: 255."
|
||||
|
||||
input name: "param13", type: "number", range: "0..2", defaultValue: "0", required: true,
|
||||
title: "13. Force auto-calibration. " +
|
||||
"Changing value of this parameter will force the calibration process. " +
|
||||
"During the calibration parameter is set to 1 or 2 and switched to 0 upon completion.\n" +
|
||||
"Available settings:\n" +
|
||||
"0 = readout,\n" +
|
||||
"1 = force auto-calibration of the load without FIBARO Bypass 2,\n" +
|
||||
"2 = force auto-calibration of the load with FIBARO Bypass 2.\n" +
|
||||
"Default value: 0."
|
||||
|
||||
input name: "param15", type: "number", range: "0..99", defaultValue: "30", required: true,
|
||||
title: "15. Burnt out bulb detection. " +
|
||||
"Function based on the sudden power variation of a specific value, interpreted as a LOAD ERROR.\n" +
|
||||
"Available settings:\n0 - function disabled,\n" +
|
||||
"1-99 - percentage value of power variation, compared to standard power consumption, measured during the calibration procedure (to be interpreted as load error/burnt out bulb).\n" +
|
||||
"Default value: 30."
|
||||
|
||||
input name: "param16", type: "number", range: "0..255", defaultValue: "5", required: true,
|
||||
title: "16. Time delay of a burnt out bulb (parameter 15) or overload (parameter 39) detection. " +
|
||||
"Time of delay (in seconds) for power variation detection, interpreted as a LOAD ERROR or OVERLOAD detection (too much power connected to the Dimmer 2).\n" +
|
||||
"Available settings:\n0 - detection of a burnt out bulb disabled,\n1-255 - delay time in seconds.\n" +
|
||||
"Default value: 5."
|
||||
|
||||
input name: "param19", type: "number", range: "0..99", defaultValue: "0", required: true,
|
||||
title: "19. Forced switch on brightness level. " +
|
||||
"If the parameter is active, switching on the Dimmer 2 (S1 single click) will always set this brightness level.\n" +
|
||||
"Available settings:\n0 - function disabled,\n1-99 - percentage level of brightness.\n" +
|
||||
"Default value: 0."
|
||||
|
||||
paragraph = "GROUP 20 - Dimmer 2 operation - Switches"
|
||||
input name: "param20", type: "number", range: "0..2", defaultValue: "0", required: true,
|
||||
title: paragraph + "\n\n" +
|
||||
"20. Switch type. " +
|
||||
"Choose between momentary, toggle and roller blind switch.\n" +
|
||||
"Available settings:\n" +
|
||||
"0 = momentary switch,\n1 = toggle switch,\n2 = roller blind switch - two switches operate the Dimmer 2 (S1 to brighten, S2 to dim).\n" +
|
||||
"Default value: 0."
|
||||
|
||||
input name: "param21", type: "number", range: "0..1", defaultValue: "0", required: true,
|
||||
title: "21. The value sent to associated devices on single click. " +
|
||||
"This parameter defines the value sent to devices associated with Dimmer 2 after its enabling.\n" +
|
||||
"Available settings:\n" +
|
||||
"0 = 0xFF value is sent, which will set associated devices to their last saved state,\n" +
|
||||
"1 = current Dimmer 2 state is sent, which will synchronize brightness level of associated devices (other dimmers for example).\n" +
|
||||
"Default value: 0."
|
||||
|
||||
input name: "param22", type: "number", range: "0..1", defaultValue: "0", required: true,
|
||||
title: "22. Assign toggle switch status to the device status. " +
|
||||
"By default each change of toggle switch position results in action of Dimmer 2 (switch on/off) regardless the physical connection of contacts.\n" +
|
||||
"Available settings:\n" +
|
||||
"0 = device changes status on switch status change,\n1 = device status is synchronized with switch status.\n" +
|
||||
"Default value: 0."
|
||||
|
||||
input name: "param23", type: "number", range: "0..1", defaultValue: "1", required: true,
|
||||
title: "23. Double click option - set the brightness level to MAX.\n" +
|
||||
"Available settings:\n" +
|
||||
"0 = double click disabled,\n" +
|
||||
"1 = double click enabled.\n" +
|
||||
"Default value: 1."
|
||||
|
||||
input name: "param24", type: "enum", defaultValue: "0", required: true,
|
||||
options: ["0" : "0",
|
||||
"1" : "1",
|
||||
"2" : "2",
|
||||
"4" : "4",
|
||||
"8" : "8",
|
||||
"16" : "16"],
|
||||
title: "24. Command frames sent in 2nd and 3rd association groups (S1 associations). " +
|
||||
"Parameter determines, which actions will not result in sending frames to association groups.\n" +
|
||||
"Available settings:\n" +
|
||||
"0 = all actions send to association groups,\n" +
|
||||
"1 = do not send when switching ON (single click),\n" +
|
||||
"2 = do not send when switching OFF (single click),\n" +
|
||||
"4 = do not send when changing dimming level (holding and releasing),\n" +
|
||||
"8 = do not send on double click,\n" +
|
||||
"16 = send 0xFF value on double click.\n" +
|
||||
"Default value: 0."
|
||||
|
||||
input name: "param25", type: "enum", defaultValue: "0", required: true,
|
||||
options: ["0" : "0",
|
||||
"1" : "1",
|
||||
"2" : "2",
|
||||
"4" : "4",
|
||||
"8" : "8",
|
||||
"16" : "16"],
|
||||
title: "25. Command frames sent in 4th and 5th association groups (S2 associations). " +
|
||||
"Parameter determines, which actions will not result in sending frames to association groups.\n" +
|
||||
"Available settings:\n" +
|
||||
"0 = all actions send to association groups,\n" +
|
||||
"1 = do not send when switching ON (single click),\n" +
|
||||
"2 = do not send when switching OFF (single click),\n" +
|
||||
"4 = do not send when changing dimming level (holding and releasing),\n" +
|
||||
"8 = do not send on double click,\n" +
|
||||
"16 = send 0xFF value on double click.\n" +
|
||||
"Default value: 0."
|
||||
|
||||
input name: "param26", type: "number", range: "0..1", defaultValue: "0", required: true,
|
||||
title: "26. The function of 3-way switch. " +
|
||||
"Switch no. 2 controls the Dimmer 2 additionally (in 3-way switch mode). Function disabled for parameter 20 set to 2 (roller blind switch).\n" +
|
||||
"Available settings:\n" +
|
||||
"0 = 3-way switch function for S2 disabled,\n" +
|
||||
"1 = 3-way switch function for S2 enabled.\n" +
|
||||
"Default value: 0."
|
||||
|
||||
input name: "param27", type: "enum", defaultValue: "15", required: true,
|
||||
options: ["0" : "0",
|
||||
"1" : "1",
|
||||
"2" : "2",
|
||||
"4" : "4",
|
||||
"8" : "8",
|
||||
"15" : "15"],
|
||||
title: "27. Associations in Z-Wave network security mode. " +
|
||||
"This parameter defines how commands are sent in speci ed association groups: as secure or non-secure. " +
|
||||
"Parameter is active only in Z-Wave network security mode. It does not apply to 1st lifeline group.\n" +
|
||||
"Available settings:\n" +
|
||||
"0 = all groups (II-V) sent as non-secure,\n" +
|
||||
"1 = 2nd group sent as secure,\n" +
|
||||
"2 = 3rd group sent as secure,\n" +
|
||||
"4 = 4th group sent as secure,\n" +
|
||||
"8 = 5th group sent as secure,\n" +
|
||||
"15 = all groups (II-V) sent as secure.\n" +
|
||||
"Default value: 15."
|
||||
|
||||
input name: "param28", type: "number", range: "0..1", defaultValue: "0", required: true,
|
||||
title: "28. Scene activation functionality.\n" +
|
||||
"Available settings:\n" +
|
||||
"0 = functionality deactivated,\n" +
|
||||
"1 = functionality activated.\n" +
|
||||
"Default value: 0.\n\n" +
|
||||
"SCENE ID depends on the switch type configurations.\n" +
|
||||
"Momentary switches:\n" +
|
||||
"SCENE ID: S1 input:\n\t16 : 1 x click\n\t14 : 2 x click\n\t-- : 3 x click\n\t12 : hold\n\t13 : release\n" +
|
||||
"SCENE ID: S2 input:\n\t26 : 1 x click\n\t24 : 2 x click\n\t25 : 3 x click\n\t22 : hold\n\t23 : release\n\n" +
|
||||
"Toggle switches:\n" +
|
||||
"SCENE ID: S1 input:\n\t10 : OFF to ON\n\t11 : ON to OFF\n\t14 : 2 x click\n\t-- : 3 x click\n" +
|
||||
"SCENE ID: S2 input:\n\t20 : OFF to ON\n\t21 : ON to OFF\n\t24 : 2 x click\n\t25 : 3 x click\n\n" +
|
||||
"Roller blinds switches:\n" +
|
||||
"SCENE ID: S1 input:\n\t10 : turn ON (1 x click)\n\t13 : release\n\t14 : 2 x click\n\t-- : 3 x click\n\t17 : brightening\n" +
|
||||
"SCENE ID: S2 input:\n\t11 : turn OFF (1 x click)\n\t13 : release\n\t14 : 2 x click\n\t15 : 3 x click\n\t18 : dimming"
|
||||
|
||||
input name: "param29", type: "number", range: "0..1", defaultValue: "0", required: true,
|
||||
title: "29. Switch functionality of S1 and S2. " +
|
||||
"This parameter allows for switching the role of keys connected to S1 and S2 without changes in connection.\n" +
|
||||
"Available settings:\n" +
|
||||
"0 = standard mode,\n" +
|
||||
"1 = S1 operates as S2, S2 operates as S1.\n" +
|
||||
"Default value: 0."
|
||||
|
||||
paragraph = "GROUP 30 - Dimmer 2 operation - Advanced functionality"
|
||||
input name: "param30", type: "number", range: "0..2", defaultValue: "2", required: true,
|
||||
title: paragraph + "\n\n" +
|
||||
"30. Load control mode. " +
|
||||
"This parameter allows to set the desired load control mode. " +
|
||||
"The de- vice automatically adjusts correct control mode, but the installer may force its change using this parameter. " +
|
||||
"Forced auto-calibration will set this parameter’s value to 2.\n" +
|
||||
"Available settings:\n" +
|
||||
"0 = forced leading edge control,\n" +
|
||||
"1 = forced trailing edge control,\n" +
|
||||
"2 = control mode selected automatically (based on auto-calibration).\n" +
|
||||
"Default value: 2."
|
||||
|
||||
input name: "param32", type: "number", range: "0..2", defaultValue: "2", required: true,
|
||||
title: "32. On/Off mode. " +
|
||||
"This mode is necessary while connecting non-dimmable light sources. " +
|
||||
"Setting this parameter to 1 automatically ignores brightening/dimming time settings. " +
|
||||
"Forced auto-calibration will set this parameter’s value to 2.\n" +
|
||||
"Available settings:\n" +
|
||||
"0 = on/off mode disabled (dimming is possible),\n" +
|
||||
"1 = on/off mode enabled (dimming is not possible),\n" +
|
||||
"2 = mode selected automatically.\n" +
|
||||
"Default value: 2."
|
||||
|
||||
input name: "param34", type: "number", range: "0..2", defaultValue: "1", required: true,
|
||||
title: "34. Soft-Start functionality. " +
|
||||
"Time required to warm up the lament of halogen bulb.\n" +
|
||||
"Available settings:\n" +
|
||||
"0 = no soft-start,\n" +
|
||||
"1 = short soft-start (0.1s),\n" +
|
||||
"2 = long soft-start (0.5s).\n" +
|
||||
"Default value: 1."
|
||||
|
||||
input name: "param35", type: "number", range: "0..4", defaultValue: "1", required: true,
|
||||
title: "35. Auto-calibration after power on. " +
|
||||
"This parameter determines the trigger of auto-calibration procedure, e.g. power on, load error, etc.\n" +
|
||||
"Available settings:\n" +
|
||||
"0 = No auto-calibration of the load after power on,\n" +
|
||||
"1 = Auto-calibration performed after first power on,\n" +
|
||||
"2 = Auto-calibration performed after each power on,\n" +
|
||||
"3 = Auto-calibration performed after first power on or after each LOAD ERROR alarm (no load, load failure, burnt out bulb), if parameter 37 is set to 1 also after alarms: SURGE (Dimmer 2 output overvoltage) and OVERCURRENT (Dimmer 2 output overcurrent),\n" +
|
||||
"4 = Auto-calibration performed after each power on or after each LOAD ERROR alarm (no load, load failure, burnt out bulb), if parameter 37 is set to 1 also after alarms: SURGE (Dimmer 2 output overvoltage) and OVERCURRENT (Dimmer 2 output overcurrent).\n" +
|
||||
"Default value: 1."
|
||||
|
||||
input name: "param37", type: "number", range: "0..1", defaultValue: "1", required: true,
|
||||
title: "37. Behaviour of the Dimmer 2 after OVERCURRENT or SURGE. " +
|
||||
"Occuring of errors related to surge or overcurrent results in turning off the output to prevent possible malfunction. " +
|
||||
"By default the device performs three attempts to turn on the load (useful in case of momentary, short failures of the power supply).\n" +
|
||||
"Available settings:\n" +
|
||||
"0 = device permanently disabled until re-ena- bling by command or external switch,\n" +
|
||||
"1 = three attempts to turn on the load.\n" +
|
||||
"Default value: 1."
|
||||
|
||||
input name: "param39", type: "number", range: "0..350", defaultValue: "250", required: true,
|
||||
title: "39. Power limit - OVERLOAD. " +
|
||||
"Reaching the defined value will result in turning off the load. " +
|
||||
"Additional apparent power limit of 350VA is active by default.\n" +
|
||||
"Available settings:\n0 - functionality disabled,\n1-350 - 1-350W.\n" +
|
||||
"Default value: 250."
|
||||
|
||||
paragraph = "GROUP 40 - Dimmer 2 operation - Alarms"
|
||||
input name: "param40", type: "number", range: "0..3", defaultValue: "3", required: true,
|
||||
title: paragraph + "\n\n" +
|
||||
"40. Response to General Purpose Alarm.\n" +
|
||||
"Available settings:\n" +
|
||||
"0 = No reaction,\n" +
|
||||
"1 = Turn on the load,\n" +
|
||||
"2 = Turn off the load,\n" +
|
||||
"3 = Load blinking.\n" +
|
||||
"Default value: 3."
|
||||
|
||||
input name: "param41", type: "number", range: "0..3", defaultValue: "2", required: true,
|
||||
title: "41. Response to Water Flooding Alarm.\n" +
|
||||
"Available settings:\n" +
|
||||
"0 = No reaction,\n" +
|
||||
"1 = Turn on the load,\n" +
|
||||
"2 = Turn off the load,\n" +
|
||||
"3 = Load blinking.\n" +
|
||||
"Default value: 2."
|
||||
|
||||
input name: "param42", type: "number", range: "0..3", defaultValue: "3", required: true,
|
||||
title: "42. Response to Smoke, CO or CO2 Alarm.\n" +
|
||||
"Available settings:\n" +
|
||||
"0 = No reaction,\n" +
|
||||
"1 = Turn on the load,\n" +
|
||||
"2 = Turn off the load,\n" +
|
||||
"3 = Load blinking.\n" +
|
||||
"Default value: 3."
|
||||
|
||||
input name: "param43", type: "number", range: "0..3", defaultValue: "1", required: true,
|
||||
title: "43. Response to Temperature Alarm.\n" +
|
||||
"Available settings:\n" +
|
||||
"0 = No reaction,\n" +
|
||||
"1 = Turn on the load,\n" +
|
||||
"2 = Turn off the load,\n" +
|
||||
"3 = Load blinking.\n" +
|
||||
"Default value: 1."
|
||||
|
||||
input name: "param44", type: "number", range: "1..32767", defaultValue: "600", required: true,
|
||||
title: "44. Time of alarm state.\n" +
|
||||
"Available settings: 1-32767 (1-32767 seconds).\n" +
|
||||
"Default value: 600."
|
||||
|
||||
paragraph = "Alarm settings - reports"
|
||||
input name: "param45", type: "number", range: "0..1", defaultValue: "1", required: true,
|
||||
title: paragraph + "\n\n" +
|
||||
"45. OVERLOAD alarm report (load power consumption too high).\n" +
|
||||
"Available settings:\n" +
|
||||
"0 = No reaction,\n" +
|
||||
"1 = Send an alarm frame.\n" +
|
||||
"Default value: 1."
|
||||
|
||||
input name: "param46", type: "number", range: "0..1", defaultValue: "1", required: true,
|
||||
title: "46. LOAD ERROR alarm report (no load, load failure, burnt out bulb).\n" +
|
||||
"Available settings:\n" +
|
||||
"0 = No reaction,\n" +
|
||||
"1 = Send an alarm frame.\n" +
|
||||
"Default value: 1."
|
||||
|
||||
input name: "param47", type: "number", range: "0..1", defaultValue: "1", required: true,
|
||||
title: "47. OVERCURRENT alarm report (short circuit, burnt out bulb causing overcurrent).\n" +
|
||||
"Available settings:\n" +
|
||||
"0 = No reaction,\n" +
|
||||
"1 = Send an alarm frame.\n" +
|
||||
"Default value: 1."
|
||||
|
||||
input name: "param48", type: "number", range: "0..1", defaultValue: "1", required: true,
|
||||
title: "48. SURGE alarm report (Dimmer 2 output overvoltage).\n" +
|
||||
"Available settings:\n" +
|
||||
"0 = No reaction,\n" +
|
||||
"1 = Send an alarm frame.\n" +
|
||||
"Default value: 1."
|
||||
|
||||
input name: "param49", type: "number", range: "0..1", defaultValue: "1", required: true,
|
||||
title: "49. OVERHEAT (critical temperature) and VOLTAGE DROP (low voltage) alarm report.\n" +
|
||||
"Available settings:\n" +
|
||||
"0 = No reaction,\n" +
|
||||
"1 = Send an alarm frame.\n" +
|
||||
"Default value: 1."
|
||||
|
||||
paragraph = "GROUP 50 - Active power and energy reports"
|
||||
input name: "param50", type: "number", range: "0..100", defaultValue: "10", required: true,
|
||||
title: paragraph + "\n\n" +
|
||||
"50. Active power reports. " +
|
||||
"The parameter defines the power level change that will result in a new power report being sent. " +
|
||||
"The value is a percentage of the previous report.\n" +
|
||||
"Available settings:\n0 - power reports disabled,\n1-100 (1-100%) - power report threshold.\n" +
|
||||
"Default value: 10."
|
||||
|
||||
input name: "param52", type: "number", range: "0..32767", defaultValue: "3600", required: true,
|
||||
title: "52. Periodic active power and energy reports. " +
|
||||
"Parameter 52 defines a time period between consecutive reports. Timer is reset and counted from zero after each report.\n" +
|
||||
"Available settings:\n0 - periodic reports disabled,\n1-32767 (1-32767 seconds).\n" +
|
||||
"Default value: 3600."
|
||||
|
||||
input name: "param53", type: "number", range: "0..255", defaultValue: "10", required: true,
|
||||
title: "53. Energy reports. " +
|
||||
"Energy level change which will result in sending a new energy report.\n" +
|
||||
"Available settings:\n0 - energy reports disabled,\n1-255 (0.01-2.55 kWh) - report triggering threshold.\n" +
|
||||
"Default value: 10."
|
||||
|
||||
input name: "param54", type: "number", range: "0..1", defaultValue: "0", required: true,
|
||||
title: "54. Self-measurement. " +
|
||||
"The Dimmer 2 may include active power and energy consumed by itself in reports sent to the main controller.\n" +
|
||||
"Available settings:\n" +
|
||||
"0 = Self-measurement inactive,\n" +
|
||||
"1 = Self-measurement active.\n" +
|
||||
"Default value: 0."
|
||||
|
||||
input name: "param58", type: "number", range: "0..2", defaultValue: "0", required: true,
|
||||
title: "58. Method of calculating the active power. This parameter defines how to calculate active power. " +
|
||||
"It is useful in a case of 2-wire connection with light sources other than resistive.\n" +
|
||||
"Available settings:\n" +
|
||||
"0 = measurement based on the standard algorithm,\n" +
|
||||
"1 = approximation based on the calibration data,\n" +
|
||||
"2 = approximation based on the control angle.\n" +
|
||||
"Default value: 0."
|
||||
|
||||
input name: "param59", type: "number", range: "0..500", defaultValue: "0", required: true,
|
||||
title: "59. Approximated power at the maximum brightness level. " +
|
||||
"This parameter determines the approximate value of the power that will be reported by the device at its maximum brightness level.\n" +
|
||||
"Available settings: 0-500 (0-500W) - power consumed by the load at the maximum brightness level.\n" +
|
||||
"Default value: 0."
|
||||
|
||||
input name: "paramAssociationGroup1", type: "bool", defaultValue: true, required: true,
|
||||
title: "The Dimmer 2 provides the association of five groups.\n\n" +
|
||||
"1st Association Group „Lifeline”,\n" +
|
||||
"Default value: true"
|
||||
|
||||
input name: "paramAssociationGroup2", type: "bool", defaultValue: true, required: true,
|
||||
title: "2nd Association Group „On/Off (S1)”,\n" +
|
||||
"Default value: true"
|
||||
|
||||
input name: "paramAssociationGroup3", type: "bool", defaultValue: false, required: true,
|
||||
title: "3rd Association Group „Dimmer (S1)”,\n" +
|
||||
"Default value: false"
|
||||
|
||||
input name: "paramAssociationGroup4", type: "bool", defaultValue: false, required: true,
|
||||
title: "4th Association Group „On/Off (S2)”,\n" +
|
||||
"Default value: false"
|
||||
|
||||
input name: "paramAssociationGroup5", type: "bool", defaultValue: false, required: true,
|
||||
title: "5th Association Group „Dimmer (S2)”.\n" +
|
||||
"Default value: false"
|
||||
}
|
||||
}
|
||||
|
||||
def parse(String description) {
|
||||
log.trace(description)
|
||||
log.debug("RAW command: $description")
|
||||
def result = null
|
||||
|
||||
if (description != "updated") {
|
||||
def cmd = zwave.parse(description.replace("98C1", "9881"), [0x20: 1, 0x26: 3, 0x32: 3, 0x25: 1, 0x98: 1, 0x70: 1, 0x85: 2, 0x9B: 1, 0x90: 1, 0x73: 1, 0x30: 1, 0x28: 1, 0x72: 1])
|
||||
if (cmd) {
|
||||
result = zwaveEvent(cmd)
|
||||
}
|
||||
}
|
||||
log.debug "Parsed '${description}' to ${result.inspect()}"
|
||||
return result
|
||||
}
|
||||
|
||||
def zwaveEvent(physicalgraph.zwave.commands.sceneactivationv1.SceneActivationSet cmd) {
|
||||
log.debug( "Scene ID: $cmd.sceneId")
|
||||
log.debug( "Dimming Duration: $cmd.dimmingDuration")
|
||||
|
||||
sendEvent(name: "scene", value: "$cmd.sceneId", data: [switchType: "$settings.param20"], descriptionText: "Scene id $cmd.sceneId was activated", isStateChange: true)
|
||||
log.debug( "Scene id $cmd.sceneId was activated" )
|
||||
}
|
||||
|
||||
// Devices that support the Security command class can send messages in an encrypted form;
|
||||
// they arrive wrapped in a SecurityMessageEncapsulation command and must be unencapsulated
|
||||
def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
|
||||
log.trace(cmd)
|
||||
def encapsulatedCommand = cmd.encapsulatedCommand([0x20: 1, 0x26: 3, 0x32: 3, 0x25: 1, 0x98: 1, 0x70: 1, 0x85: 2, 0x9B: 1, 0x90: 1, 0x73: 1, 0x30: 1, 0x28: 1, 0x72: 1]) // can specify command class versions here like in zwave.parse
|
||||
if (encapsulatedCommand) {
|
||||
return zwaveEvent(encapsulatedCommand)
|
||||
} else {
|
||||
log.warn "Unable to extract encapsulated cmd from $cmd"
|
||||
createEvent(descriptionText: cmd.toString())
|
||||
}
|
||||
}
|
||||
|
||||
def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) {
|
||||
log.trace(cmd)
|
||||
dimmerEvents(cmd)
|
||||
}
|
||||
|
||||
def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd) {
|
||||
log.trace(cmd)
|
||||
//dimmerEvents(cmd)
|
||||
}
|
||||
def zwaveEvent(physicalgraph.zwave.commands.switchmultilevelv3.SwitchMultilevelReport cmd) {
|
||||
log.trace(cmd)
|
||||
dimmerEvents(cmd)
|
||||
}
|
||||
|
||||
def zwaveEvent(physicalgraph.zwave.commands.switchbinaryv1.SwitchBinaryReport cmd)
|
||||
{
|
||||
log.trace(cmd)
|
||||
dimmerEvents(cmd)
|
||||
}
|
||||
|
||||
|
||||
def dimmerEvents(physicalgraph.zwave.Command cmd) {
|
||||
log.trace(cmd)
|
||||
def result = []
|
||||
def value = (cmd.value ? "on" : "off")
|
||||
def switchEvent = createEvent(name: "switch", value: value, descriptionText: "$device.displayName was turned $value")
|
||||
result << switchEvent
|
||||
if (cmd.value) {
|
||||
result << createEvent(name: "level", value: cmd.value, unit: "%")
|
||||
}
|
||||
if (switchEvent.isStateChange) {
|
||||
result << response(["delay 3000", zwave.meterV2.meterGet(scale: 2).format()])
|
||||
}
|
||||
return result
|
||||
}
|
||||
|
||||
def zwaveEvent(physicalgraph.zwave.commands.meterv3.MeterReport cmd) {
|
||||
log.trace(cmd)
|
||||
if (cmd.meterType == 1) {
|
||||
if (cmd.scale == 0) {
|
||||
return createEvent(name: "energy", value: cmd.scaledMeterValue, unit: "kWh")
|
||||
} else if (cmd.scale == 1) {
|
||||
return createEvent(name: "energy", value: cmd.scaledMeterValue, unit: "kVAh")
|
||||
} else if (cmd.scale == 2) {
|
||||
return createEvent(name: "power", value: Math.round(cmd.scaledMeterValue), unit: "W")
|
||||
} else {
|
||||
return createEvent(name: "electric", value: cmd.scaledMeterValue, unit: ["pulses", "V", "A", "R/Z", ""][cmd.scale - 3])
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
def zwaveEvent(physicalgraph.zwave.Command cmd) {
|
||||
log.trace(cmd)
|
||||
log.debug "No handler for $cmd"
|
||||
// Handles all Z-Wave commands we aren't interested in
|
||||
createEvent(descriptionText: cmd.toString(), isStateChange: false)
|
||||
}
|
||||
|
||||
|
||||
def on() {
|
||||
log.trace("on")
|
||||
secureSequence([
|
||||
zwave.basicV1.basicSet(value: 0xFF),
|
||||
zwave.switchMultilevelV1.switchMultilevelGet()
|
||||
])
|
||||
}
|
||||
|
||||
def off() {
|
||||
log.trace("off")
|
||||
secureSequence([
|
||||
zwave.basicV1.basicSet(value: 0x00),
|
||||
zwave.switchMultilevelV1.switchMultilevelGet()
|
||||
])
|
||||
}
|
||||
|
||||
def poll() {
|
||||
log.trace("poll")
|
||||
secureSequence([
|
||||
zwave.meterV2.meterGet(scale: 0),
|
||||
zwave.meterV2.meterGet(scale: 2)
|
||||
])
|
||||
}
|
||||
|
||||
def refresh() {
|
||||
log.trace("trace")
|
||||
secureSequence([
|
||||
zwave.meterV2.meterGet(scale: 0),
|
||||
zwave.meterV2.meterGet(scale: 2)
|
||||
])
|
||||
}
|
||||
|
||||
def reset() {
|
||||
log.trace("reset")
|
||||
return secureSequence([
|
||||
zwave.switchMultilevelV1.switchMultilevelGet(),
|
||||
zwave.meterV2.meterReset(),
|
||||
zwave.meterV2.meterGet(scale: 0),
|
||||
zwave.meterV2.meterGet(scale: 2)
|
||||
])
|
||||
}
|
||||
|
||||
def setLevel(level) {
|
||||
log.trace("setlevel")
|
||||
if(level > 99) level = 99
|
||||
secureSequence([
|
||||
zwave.basicV1.basicSet(value: level),
|
||||
zwave.switchMultilevelV1.switchMultilevelGet()
|
||||
], 5000)
|
||||
}
|
||||
|
||||
def configureAfterSecure() {
|
||||
log.debug "configureAfterSecure()"
|
||||
def cmds = secureSequence([
|
||||
zwave.configurationV1.configurationSet(parameterNumber: 1, size: 1, scaledConfigurationValue: param1.toInteger()),
|
||||
zwave.configurationV1.configurationSet(parameterNumber: 2, size: 1, scaledConfigurationValue: param2.toInteger()),
|
||||
zwave.configurationV1.configurationSet(parameterNumber: 3, size: 1, scaledConfigurationValue: param3.toInteger()),
|
||||
zwave.configurationV1.configurationSet(parameterNumber: 4, size: 2, scaledConfigurationValue: param4.toInteger()),
|
||||
zwave.configurationV1.configurationSet(parameterNumber: 5, size: 1, scaledConfigurationValue: param5.toInteger()),
|
||||
zwave.configurationV1.configurationSet(parameterNumber: 6, size: 2, scaledConfigurationValue: param6.toInteger()),
|
||||
zwave.configurationV1.configurationSet(parameterNumber: 7, size: 1, scaledConfigurationValue: param7.toInteger()),
|
||||
zwave.configurationV1.configurationSet(parameterNumber: 8, size: 2, scaledConfigurationValue: param8.toInteger()),
|
||||
zwave.configurationV1.configurationSet(parameterNumber: 9, size: 1, scaledConfigurationValue: param9.toInteger()),
|
||||
zwave.configurationV1.configurationSet(parameterNumber: 10, size: 2, scaledConfigurationValue: param10.toInteger()),
|
||||
zwave.configurationV1.configurationSet(parameterNumber: 11, size: 2, scaledConfigurationValue: param11.toInteger()),
|
||||
zwave.configurationV1.configurationSet(parameterNumber: 13, size: 1, scaledConfigurationValue: param13.toInteger()),
|
||||
zwave.configurationV1.configurationSet(parameterNumber: 15, size: 1, scaledConfigurationValue: param15.toInteger()),
|
||||
zwave.configurationV1.configurationSet(parameterNumber: 16, size: 2, scaledConfigurationValue: param16.toInteger()),
|
||||
zwave.configurationV1.configurationSet(parameterNumber: 19, size: 1, scaledConfigurationValue: param19.toInteger()),
|
||||
zwave.configurationV1.configurationSet(parameterNumber: 20, size: 1, scaledConfigurationValue: param20.toInteger()),
|
||||
zwave.configurationV1.configurationSet(parameterNumber: 21, size: 1, scaledConfigurationValue: param21.toInteger()),
|
||||
zwave.configurationV1.configurationSet(parameterNumber: 22, size: 1, scaledConfigurationValue: param22.toInteger()),
|
||||
zwave.configurationV1.configurationSet(parameterNumber: 23, size: 1, scaledConfigurationValue: param23.toInteger()),
|
||||
zwave.configurationV1.configurationSet(parameterNumber: 24, size: 1, scaledConfigurationValue: param24.toInteger()),
|
||||
zwave.configurationV1.configurationSet(parameterNumber: 25, size: 1, scaledConfigurationValue: param25.toInteger()),
|
||||
zwave.configurationV1.configurationSet(parameterNumber: 26, size: 1, scaledConfigurationValue: param26.toInteger()),
|
||||
zwave.configurationV1.configurationSet(parameterNumber: 27, size: 1, scaledConfigurationValue: param27.toInteger()),
|
||||
zwave.configurationV1.configurationSet(parameterNumber: 28, size: 1, scaledConfigurationValue: param28.toInteger()),
|
||||
zwave.configurationV1.configurationSet(parameterNumber: 29, size: 1, scaledConfigurationValue: param29.toInteger()),
|
||||
zwave.configurationV1.configurationSet(parameterNumber: 30, size: 1, scaledConfigurationValue: param30.toInteger()),
|
||||
zwave.configurationV1.configurationSet(parameterNumber: 32, size: 1, scaledConfigurationValue: param32.toInteger()),
|
||||
zwave.configurationV1.configurationSet(parameterNumber: 34, size: 1, scaledConfigurationValue: param34.toInteger()),
|
||||
zwave.configurationV1.configurationSet(parameterNumber: 35, size: 1, scaledConfigurationValue: param35.toInteger()),
|
||||
zwave.configurationV1.configurationSet(parameterNumber: 37, size: 1, scaledConfigurationValue: param37.toInteger()),
|
||||
zwave.configurationV1.configurationSet(parameterNumber: 39, size: 2, scaledConfigurationValue: param39.toInteger()),
|
||||
zwave.configurationV1.configurationSet(parameterNumber: 40, size: 1, scaledConfigurationValue: param40.toInteger()),
|
||||
zwave.configurationV1.configurationSet(parameterNumber: 41, size: 1, scaledConfigurationValue: param41.toInteger()),
|
||||
zwave.configurationV1.configurationSet(parameterNumber: 42, size: 1, scaledConfigurationValue: param42.toInteger()),
|
||||
zwave.configurationV1.configurationSet(parameterNumber: 43, size: 1, scaledConfigurationValue: param43.toInteger()),
|
||||
zwave.configurationV1.configurationSet(parameterNumber: 44, size: 2, scaledConfigurationValue: param44.toInteger()),
|
||||
zwave.configurationV1.configurationSet(parameterNumber: 45, size: 1, scaledConfigurationValue: param45.toInteger()),
|
||||
zwave.configurationV1.configurationSet(parameterNumber: 46, size: 1, scaledConfigurationValue: param46.toInteger()),
|
||||
zwave.configurationV1.configurationSet(parameterNumber: 47, size: 1, scaledConfigurationValue: param47.toInteger()),
|
||||
zwave.configurationV1.configurationSet(parameterNumber: 48, size: 1, scaledConfigurationValue: param48.toInteger()),
|
||||
zwave.configurationV1.configurationSet(parameterNumber: 49, size: 1, scaledConfigurationValue: param49.toInteger()),
|
||||
zwave.configurationV1.configurationSet(parameterNumber: 50, size: 1, scaledConfigurationValue: param50.toInteger()),
|
||||
zwave.configurationV1.configurationSet(parameterNumber: 52, size: 2, scaledConfigurationValue: param52.toInteger()),
|
||||
zwave.configurationV1.configurationSet(parameterNumber: 53, size: 2, scaledConfigurationValue: param53.toInteger()),
|
||||
zwave.configurationV1.configurationSet(parameterNumber: 54, size: 1, scaledConfigurationValue: param54.toInteger()),
|
||||
zwave.configurationV1.configurationSet(parameterNumber: 58, size: 1, scaledConfigurationValue: param58.toInteger()),
|
||||
zwave.configurationV1.configurationSet(parameterNumber: 59, size: 2, scaledConfigurationValue: param59.toInteger())
|
||||
])
|
||||
|
||||
// Register for Group 1
|
||||
if(paramAssociationGroup1) {
|
||||
cmds << secure(zwave.associationV2.associationSet(groupingIdentifier:1, nodeId: [zwaveHubNodeId]))
|
||||
}
|
||||
else {
|
||||
cmds << secure(zwave.associationV2.associationRemove(groupingIdentifier:1, nodeId: [zwaveHubNodeId]))
|
||||
}
|
||||
// Register for Group 2
|
||||
if(paramAssociationGroup2) {
|
||||
cmds << secure(zwave.associationV2.associationSet(groupingIdentifier:2, nodeId: [zwaveHubNodeId]))
|
||||
}
|
||||
else {
|
||||
cmds << secure(zwave.associationV2.associationRemove(groupingIdentifier:2, nodeId: [zwaveHubNodeId]))
|
||||
}
|
||||
// Register for Group 3
|
||||
if(paramAssociationGroup3) {
|
||||
cmds << secure(zwave.associationV2.associationSet(groupingIdentifier:3, nodeId: [zwaveHubNodeId]))
|
||||
}
|
||||
else {
|
||||
cmds << secure(zwave.associationV2.associationRemove(groupingIdentifier:3, nodeId: [zwaveHubNodeId]))
|
||||
}
|
||||
// Register for Group 4
|
||||
if(paramAssociationGroup4) {
|
||||
cmds << secure(zwave.associationV2.associationSet(groupingIdentifier:4, nodeId: [zwaveHubNodeId]))
|
||||
}
|
||||
else {
|
||||
cmds << secure(zwave.associationV2.associationRemove(groupingIdentifier:4, nodeId: [zwaveHubNodeId]))
|
||||
}
|
||||
// Register for Group 5
|
||||
if(paramAssociationGroups5) {
|
||||
cmds << secure(zwave.associationV2.associationSet(groupingIdentifier:5, nodeId: [zwaveHubNodeId]))
|
||||
}
|
||||
else {
|
||||
cmds << secure(zwave.associationV2.associationRemove(groupingIdentifier:5, nodeId: [zwaveHubNodeId]))
|
||||
}
|
||||
|
||||
cmds
|
||||
}
|
||||
|
||||
def configure() {
|
||||
// Wait until after the secure exchange for this
|
||||
log.debug "configure()"
|
||||
}
|
||||
|
||||
def updated() {
|
||||
log.debug "updated()"
|
||||
response(["delay 2000"] + configureAfterSecure() + refresh())
|
||||
}
|
||||
|
||||
private secure(physicalgraph.zwave.Command cmd) {
|
||||
log.trace(cmd)
|
||||
zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
|
||||
}
|
||||
|
||||
private secureSequence(commands, delay=200) {
|
||||
log.debug "$commands"
|
||||
delayBetween(commands.collect{ secure(it) }, delay)
|
||||
}
|
||||
Reference in New Issue
Block a user