From b5ec617c54de8f357499dabec09362d5f11837a9 Mon Sep 17 00:00:00 2001
From: Julio <julheras@gmail.com>
Date: Fri, 3 Feb 2017 16:20:24 -0800
Subject: [PATCH] MSA-1765: Aeon supply me this code to fix error in Motor
 Controller

---
 .../aeon-motor-controller.groovy              | 145 ++++++++++++++++++
 1 file changed, 145 insertions(+)
 create mode 100644 devicetypes/bravenel/aeon-motor-controller.src/aeon-motor-controller.groovy

diff --git a/devicetypes/bravenel/aeon-motor-controller.src/aeon-motor-controller.groovy b/devicetypes/bravenel/aeon-motor-controller.src/aeon-motor-controller.groovy
new file mode 100644
index 0000000..d5c469b
--- /dev/null
+++ b/devicetypes/bravenel/aeon-motor-controller.src/aeon-motor-controller.groovy
@@ -0,0 +1,145 @@
+/**
+ *  Aeon Motor Controller
+ *
+ *  Copyright 2015 Bruce Ravenel
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Aeon Motor Controller", namespace: "bravenel", author: "Bruce Ravenel") {
+		capability "Refresh"
+		capability "Actuator"
+        capability "doorControl"
+        capability "Switch"
+
+        command "up"
+        command "down"
+        command "stop"
+
+//		fingerprint inClusters: "0x26,0x32"
+	}
+
+	simulator {
+        status "up":   "command: 2604, payload: FF"
+        status "down": "command: 2604, payload: 00"
+        status "stop": "command: 2605, payload: FE"
+
+		["FF", "FE", "00"].each { val ->
+			reply "2001$val,delay 100,2602": "command: 2603, payload: $val"
+		}
+	}
+
+	tiles {
+		standardTile("motor", "device.motor", width: 2, height: 2) {
+			state("stopUp", label:'stop', icon:"st.doors.garage.garage-open", action: 'down', backgroundColor:"#79b821")
+			state("stopDn", label:'stop', icon:"st.doors.garage.garage-closed", action: 'up', backgroundColor:"#79b821")
+			state("up", label:'up', icon:"st.doors.garage.garage-opening", action:'stop', backgroundColor:"#ffe71e")
+			state("down", label:'down', icon:"st.doors.garage.garage-closing", action:'stop', backgroundColor:"#ffe71e")
+		}
+		valueTile("energy", "device.energy", decoration: "flat") {
+			state "default", label:' '
+		}
+		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
+			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+        standardTile("stop", "device.switch") {
+        	state "default", label:"", action: "stop", icon:"http://cdn.device-icons.smartthings.com/sonos/stop-btn@2x.png"
+        }
+        standardTile("up", "device.switch") {
+        	state "default", label: "Up", action: "up", icon:"http://cdn.device-icons.smartthings.com/thermostat/thermostat-up@2x.png"
+        }
+        standardTile("down", "device.switch") {
+        	state "default", label: "Down", action: "down", icon:"http://cdn.device-icons.smartthings.com/thermostat/thermostat-down@2x.png"
+        }
+	}
+	main(["motor"])
+	details(["motor",  "refresh", "energy", "up", "down", "stop",])
+}
+
+// parse events into attributes
+def parse(String description) {
+	def result = []
+	def cmd = zwave.parse(description, [0x20: 1, 0x26: 3])
+	if (cmd) {
+		result = zwaveEvent(cmd)
+		log.debug("'$description' parsed to $result")
+	} else {
+		log.debug("Couldn't zwave.parse '$description'")
+	}
+	result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) {
+	motorEvents(cmd)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd) {
+	motorEvents(cmd)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.switchmultilevelv3.SwitchMultilevelReport cmd) {
+	motorEvents(cmd)
+}
+
+def motorEvents(physicalgraph.zwave.Command cmd) {
+	def result = []
+    def switchEvent = []
+    if(cmd.value == 0) {switchEvent = createEvent(name: "motor", value: "down", descriptionText: text)}
+    else if(cmd.value == 254) {
+    	def stopVal = state.up ? "stopUp" : "stopDn"
+    	switchEvent = createEvent(name: "motor", value: stopVal, descriptionText: text)
+    }
+    else if(cmd.value == 255) {switchEvent = createEvent(name: "motor", value: "up", descriptionText: text)}
+	result << switchEvent
+}
+
+def refresh() {
+	zwave.switchMultilevelV1.switchMultilevelGet().format()
+}
+
+def up() {
+	state.up = true
+	delayBetween([
+    	zwave.basicV1.basicSet(value: 0xFF).format(),
+		zwave.switchMultilevelV1.switchMultilevelGet().format()
+    ], 1000)
+}
+
+def down() {
+	state.up = false
+	delayBetween([
+    	zwave.basicV1.basicSet(value: 0x00).format(),
+		zwave.switchMultilevelV1.switchMultilevelGet().format()
+    ], 1000)
+}
+
+def stop() {
+	delayBetween([
+    	zwave.switchMultilevelV1.switchMultilevelStopLevelChange().format(),
+		zwave.switchMultilevelV1.switchMultilevelGet().format()
+    ], 1000)
+}
+
+def on() {
+	state.up = true
+	delayBetween([
+    	zwave.basicV1.basicSet(value: 0xFF).format(),
+		zwave.switchMultilevelV1.switchMultilevelGet().format()
+    ], 1000)
+}
+
+def off() {
+	state.up = false
+	delayBetween([
+    	zwave.basicV1.basicSet(value: 0x00).format(),
+		zwave.switchMultilevelV1.switchMultilevelGet().format()
+    ], 1000)
+}
\ No newline at end of file