diff --git a/devicetypes/fortrezz/telguard-gdc1.src/telguard-gdc1.groovy b/devicetypes/fortrezz/telguard-gdc1.src/telguard-gdc1.groovy
new file mode 100644
index 0000000..30b3854
--- /dev/null
+++ b/devicetypes/fortrezz/telguard-gdc1.src/telguard-gdc1.groovy
@@ -0,0 +1,183 @@
+/**
+ *  Z-Wave Garage Door Opener
+ *
+ *  Copyright 2014 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Telguard GDC1", namespace: "fortrezz", author: "FortrezZ, LLC") {
+		capability "Actuator"
+		capability "Door Control"
+		capability "Garage Door Control"
+		capability "Contact Sensor"
+		capability "Refresh"
+		capability "Sensor"
+        capability "Switch"
+
+        fingerprint deviceId: "0x1000", inClusters: "0x72, 0x86, 0x25"
+	}
+
+	simulator {
+		status "closed": "command: 9881, payload: 00 66 03 00"
+		status "opening": "command: 9881, payload: 00 66 03 FE"
+		status "open": "command: 9881, payload: 00 66 03 FF"
+		status "closing": "command: 9881, payload: 00 66 03 FC"
+		status "unknown": "command: 9881, payload: 00 66 03 FD"
+
+		reply "988100660100": "command: 9881, payload: 00 66 03 FC"
+		reply "9881006601FF": "command: 9881, payload: 00 66 03 FE"
+	}
+
+	tiles {
+		standardTile("toggle", "device.door", width: 2, height: 2) {
+			state("unknown", label:'${name}', action:"refresh.refresh", icon:"st.doors.garage.garage-open", backgroundColor:"#ffa81e")
+			state("closed", label:'${name}', action:"door control.open", icon:"st.doors.garage.garage-closed", backgroundColor:"#79b821", nextState:"opening")
+			state("open", label:'${name}', action:"door control.close", icon:"st.doors.garage.garage-open", backgroundColor:"#ffa81e", nextState:"closing")
+			state("opening", label:'${name}', icon:"st.doors.garage.garage-opening", backgroundColor:"#ffe71e")
+			state("closing", label:'${name}', icon:"st.doors.garage.garage-closing", backgroundColor:"#ffe71e")
+		}
+		standardTile("open", "device.door", inactiveLabel: false, decoration: "flat") {
+			state "default", label:'open', action:"door control.open", icon:"st.doors.garage.garage-opening"
+		}
+		standardTile("close", "device.door", inactiveLabel: false, decoration: "flat") {
+			state "default", label:'close', action:"door control.close", icon:"st.doors.garage.garage-closing"
+		}
+		standardTile("refresh", "device.door", inactiveLabel: false, decoration: "flat") {
+			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+        standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
+            state "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.off", backgroundColor:"#79b821", nextState:"turningOff"
+            state "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.on", backgroundColor:"#ffffff", nextState:"turningOn"
+            state "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.off", backgroundColor:"#79b821", nextState:"turningOff"
+            state "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.on", backgroundColor:"#ffffff", nextState:"turningOn"
+            state "offline", label:'${name}', icon:"st.switches.switch.off", backgroundColor:"#ff0000"
+        }
+
+		main "toggle"
+		details(["toggle", "open", "close", "refresh"])
+	}
+}
+
+def parse(String description) {
+	def results = []
+    log.debug(description)
+	if (description.startsWith("Err")) {
+	    results << createEvent(descriptionText:description, displayed:true)
+	} else {
+		def cmd = zwave.parse(description)
+		if (cmd) {
+			results = zwaveEvent(cmd)
+		}
+	}
+	log.debug "\"$description\" parsed to ${results.inspect()}"
+	return results
+}
+
+def open() {
+    sendEvent(name: "door", value: "opening", descriptionText: "$device.displayName: opening")
+    delayBetween([
+		zwave.basicV1.basicSet(value: 0xFF).format(),
+        zwave.basicV1.basicGet().format()
+    ], 15000)
+}
+
+def close() {
+    sendEvent(name: "door", value: "closing", descriptionText: "$device.displayName: closing")
+	zwave.basicV1.basicSet(value: 0x00).format()
+}
+
+def on() {
+	open()
+}
+
+def off() {
+	close()
+}
+
+def refresh() {
+	zwave.basicV1.basicGet().format()
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) {
+	def map = [name: "door"]
+    def map2 = [name: "switch"]
+    if (cmd.value == 0xFF)
+    {
+    	map.value = "open"
+        map2.value = "on"
+        sendEvent(map2)
+    }
+    else if (cmd.value == 0x00)
+    {
+    	map.value = "closed"
+        map2.value = "off"
+        sendEvent(map2)
+    }
+    else
+    {
+    	map.value = "unknown"
+    }
+	
+    createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.switchbinaryv1.SwitchBinaryReport cmd) {
+	def map = [name: "door"]
+    def map2 = [name: "switch"]
+    if (cmd.value == 0xFF)
+    {
+    	map.value = "open"
+        map2.value = "on"
+        sendEvent(map2)
+    }
+    else if (cmd.value == 0x00)
+    {
+    	map.value = "closed"
+        map2.value = "off"
+        sendEvent(map2)
+    }
+    else
+    {
+    	map.value = "unknown"
+    }
+	
+    createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
+	def result = []
+
+	def msr = String.format("%04X-%04X-%04X", cmd.manufacturerId, cmd.productTypeId, cmd.productId)
+	log.debug "msr: $msr"
+	updateDataValue("MSR", msr)
+
+	result << createEvent(descriptionText: "$device.displayName MSR: $msr", isStateChange: false)
+	result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd) {
+	def fw = "${cmd.applicationVersion}.${cmd.applicationSubVersion}"
+	updateDataValue("fw", fw)
+	def text = "$device.displayName: firmware version: $fw, Z-Wave version: ${cmd.zWaveProtocolVersion}.${cmd.zWaveProtocolSubVersion}"
+	createEvent(descriptionText: text, isStateChange: false)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.applicationstatusv1.ApplicationBusy cmd) {
+	def msg = cmd.status == 0 ? "try again later" :
+	          cmd.status == 1 ? "try again in $cmd.waitTime seconds" :
+	          cmd.status == 2 ? "request queued" : "sorry"
+	createEvent(displayed: true, descriptionText: "$device.displayName is busy, $msg")
+}
+
+def zwaveEvent(physicalgraph.zwave.Command cmd) {
+	createEvent(displayed: false, descriptionText: "$device.displayName: $cmd")
+}
\ No newline at end of file