diff --git a/devicetypes/fuzzysb/aeon-water-sensor.src/aeon-water-sensor.groovy b/devicetypes/fuzzysb/aeon-water-sensor.src/aeon-water-sensor.groovy
new file mode 100644
index 0000000..8106092
--- /dev/null
+++ b/devicetypes/fuzzysb/aeon-water-sensor.src/aeon-water-sensor.groovy
@@ -0,0 +1,240 @@
+/**
+ *  Copyright 2016 Stuart Buchanan
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ *	Aeon Water Sensor (DSB45-ZWEU/DSB45-ZWUS)
+ *
+ *	Author: Stuart Buchanan, Based on original work by Tosa with thanks
+ *	Date: 2016-03-07
+ */
+
+metadata {
+	definition (name: "Aeon Water Sensor", namespace: "fuzzysb", author: "Stuart Buchanan") {
+		capability "Water Sensor"
+		capability "Battery"
+		capability "Configuration"
+
+        fingerprint deviceId: "0x2001", inClusters: "0x30,0x80,0x84,0x71,0x70,0x85,0x86,0x72"
+	}
+
+	simulator {
+		status "dry": "command: 2001, payload: 00"
+		status "wet": "command: 2001, payload: FF"
+	}
+
+	
+tiles {
+		standardTile("water", "device.water", width: 2, height: 2) {
+			state "dry", icon:"st.alarm.water.dry", backgroundColor:"#ffffff"
+			state "wet", icon:"st.alarm.water.wet", backgroundColor:"#53a7c0"
+		}
+		valueTile("battery", "device.battery", inactiveLabel: false, canChangeBackground: true) {
+			state "battery", label:'${currentValue}% Battery', unit:"",
+            backgroundColors:[
+				[value: 19, color: "#BC2323"],
+				[value: 20, color: "#D04E00"],
+				[value: 30, color: "#D04E00"],
+				[value: 40, color: "#DAC400"],
+				[value: 41, color: "#79b821"]
+			]
+		}
+		standardTile("configure", "device.configure", inactiveLabel: false, decoration: "flat") {
+			state "configure", label:'', action:"configuration.configure", icon:"st.secondary.configure"
+		}
+		main "water"
+		details(["water", "battery", "configure"])
+	}
+}
+
+def parse(String description) {
+	def result = null
+	if (description.startsWith("Err 106")) {
+		if (state.sec) {
+			log.debug description
+		} else {
+			result = createEvent(
+				descriptionText: "This sensor failed to complete the network security key exchange. If you are unable to control it via SmartThings, you must remove it from your network and add it again.",
+				eventType: "ALERT",
+				name: "secureInclusion",
+				value: "failed",
+				isStateChange: true,
+			)
+		}
+	} else if (description != "updated") {
+		def cmd = zwave.parse(description, [0x20: 1, 0x25: 1, 0x30: 1, 0x31: 5, 0x80: 1, 0x84: 1, 0x71: 3, 0x9C: 1])
+		if (cmd) {
+			result = zwaveEvent(cmd)
+		}
+	}
+	log.debug "parsed '$description' to $result"
+	return result
+}
+
+def updated() {
+	def cmds = []
+	if (!state.MSR) {
+		cmds = [
+			zwave.manufacturerSpecificV2.manufacturerSpecificGet().format(),
+			"delay 1200",
+			zwave.wakeUpV1.wakeUpNoMoreInformation().format()
+		]
+	} else if (!state.lastbat) {
+		cmds = []
+	} else {
+		cmds = [zwave.wakeUpV1.wakeUpNoMoreInformation().format()]
+	}
+	response(cmds)
+}
+
+def configure() {
+	delayBetween([
+		zwave.manufacturerSpecificV2.manufacturerSpecificGet().format(),
+		batteryGetCommand()
+	], 6000)
+}
+
+def sensorValueEvent(value) {
+	if (value) {
+		createEvent(name: "water", value: "wet", descriptionText: "$device.displayName is wet")
+	} else {
+		createEvent(name: "water", value: "dry", descriptionText: "$device.displayName is dry")
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd)
+{
+	sensorValueEvent(cmd.value)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd)
+{
+	sensorValueEvent(cmd.value)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.switchbinaryv1.SwitchBinaryReport cmd)
+{
+	sensorValueEvent(cmd.value)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.sensorbinaryv1.SensorBinaryReport cmd)
+{
+	sensorValueEvent(cmd.sensorValue)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.sensoralarmv1.SensorAlarmReport cmd)
+{
+	sensorValueEvent(cmd.sensorState)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cmd)
+{
+	def result = []
+	if (cmd.notificationType == 0x06 && cmd.event == 0x16) {
+		result << sensorValueEvent(1)
+	} else if (cmd.notificationType == 0x06 && cmd.event == 0x17) {
+		result << sensorValueEvent(0)
+	} else if (cmd.notificationType == 0x07) {
+		if (cmd.v1AlarmType == 0x07) {  // special case for nonstandard messages from Monoprice door/window sensors
+			result << sensorValueEvent(cmd.v1AlarmLevel)
+		} else if (cmd.event == 0x01 || cmd.event == 0x02) {
+			result << sensorValueEvent(1)
+		} else if (cmd.event == 0x03) {
+			result << createEvent(descriptionText: "$device.displayName covering was removed", isStateChange: true)
+			result << response(zwave.wakeUpV1.wakeUpIntervalSet(seconds:4*3600, nodeid:zwaveHubNodeId))
+			if(!state.MSR) result << response(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
+		} else if (cmd.event == 0x05 || cmd.event == 0x06) {
+			result << createEvent(descriptionText: "$device.displayName detected glass breakage", isStateChange: true)
+		} else if (cmd.event == 0x07) {
+			if(!state.MSR) result << response(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
+			result << createEvent(name: "motion", value: "active", descriptionText:"$device.displayName detected motion")
+		}
+	} else if (cmd.notificationType) {
+		def text = "Notification $cmd.notificationType: event ${([cmd.event] + cmd.eventParameter).join(", ")}"
+		result << createEvent(name: "notification$cmd.notificationType", value: "$cmd.event", descriptionText: text, displayed: false)
+	} else {
+		def value = cmd.v1AlarmLevel == 255 ? "active" : cmd.v1AlarmLevel ?: "inactive"
+		result << createEvent(name: "alarm $cmd.v1AlarmType", value: value, displayed: false)
+	}
+	result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd)
+{
+	def event = createEvent(descriptionText: "${device.displayName} woke up", isStateChange: false)
+	def cmds = []
+	if (!state.MSR) {
+		cmds << zwave.wakeUpV1.wakeUpIntervalSet(seconds:4*3600, nodeid:zwaveHubNodeId).format()
+		cmds << zwave.manufacturerSpecificV2.manufacturerSpecificGet().format()
+		cmds << "delay 1200"
+	}
+	if (!state.lastbat || now() - state.lastbat > 53*60*60*1000) {
+		cmds << batteryGetCommand()
+	} else {
+		cmds << zwave.wakeUpV1.wakeUpNoMoreInformation().format()
+	}
+	[event, response(cmds)]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
+	def map = [ name: "battery", unit: "%" ]
+	if (cmd.batteryLevel == 0xFF) {
+		map.value = 1
+		map.descriptionText = "${device.displayName} has a low battery"
+		map.isStateChange = true
+	} else {
+		map.value = cmd.batteryLevel
+	}
+	state.lastbat = now()
+	[createEvent(map), response(zwave.wakeUpV1.wakeUpNoMoreInformation())]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
+	def result = []
+
+	def msr = String.format("%04X-%04X-%04X", cmd.manufacturerId, cmd.productTypeId, cmd.productId)
+	log.debug "msr: $msr"
+	updateDataValue("MSR", msr)
+
+	result << createEvent(descriptionText: "$device.displayName MSR: $msr", isStateChange: false)
+
+	if (msr == "011A-0601-0901") {  // Enerwave motion doesn't always get the associationSet that the hub sends on join
+		result << response(zwave.associationV1.associationSet(groupingIdentifier:1, nodeId:zwaveHubNodeId))
+	} else if (!device.currentState("battery")) {
+		if (msr == "0086-0102-0059") {
+			result << response(zwave.securityV1.securityMessageEncapsulation().encapsulate(zwave.batteryV1.batteryGet()).format())
+		} else {
+			result << response(batteryGetCommand())
+		}
+	}
+
+	result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
+	def encapsulatedCommand = cmd.encapsulatedCommand([0x20: 1, 0x85: 2, 0x70: 1])
+	// log.debug "encapsulated: $encapsulatedCommand"
+	if (encapsulatedCommand) {
+		state.sec = 1
+		zwaveEvent(encapsulatedCommand)
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.Command cmd) {
+	createEvent(descriptionText: "$device.displayName: $cmd", displayed: false)
+}
+
+def batteryGetCommand() {
+	def cmd = zwave.batteryV1.batteryGet()
+	if (state.sec) {
+		cmd = zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd)
+	}
+	cmd.format()
+}
\ No newline at end of file