diff --git a/devicetypes/smc/smc-door-window-sensor.src/smc-door-window-sensor.groovy b/devicetypes/smc/smc-door-window-sensor.src/smc-door-window-sensor.groovy
new file mode 100644
index 0000000..9c8c86b
--- /dev/null
+++ b/devicetypes/smc/smc-door-window-sensor.src/smc-door-window-sensor.groovy
@@ -0,0 +1,372 @@
+/**
+ *  SMCDW30-Z
+ *
+ *  Copyright 2016 Roy Chuang
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+
+metadata {
+	definition (name: "SMC Door/Window Sensor", namespace: "SMC", author: "Roy Chuang") {
+		capability "Contact Sensor"
+		capability "Configuration"
+		capability "Battery"
+		capability "Temperature Measurement"
+		capability "Refresh"
+		capability "Tamper Alert"
+		capability "Sensor"		
+
+		command "enrollResponse"
+
+		fingerprint profileId: "0104", deviceId: "0402", deviceVersion: "00", inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "ACCTON", model: "SMCDW30-Z"
+	}
+
+	simulator {
+		status "closed": "zone status 0x0000 -- extended status 0x00"
+		status "open": "zone status 0x0001 -- extended status 0x00"
+		status "tamper alert with closed": "zone status 0x0004 -- extended status 0x00"
+		status "tamper alert with open": "zone status 0x0005 -- extended status 0x00"
+	}
+
+	preferences {
+		section {
+			image(name: 'educationalcontent', multiple: true, images: [
+				"http://na.smc.com/site/wp-content/uploads/2016/06/SMCDW30-Z-Sensor-_Magnet-1-170x170.png"
+				])
+		}
+		section {
+			input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter '-5'. If 3 degrees too cold, enter '+3'.", displayDuringSetup: false, type: "paragraph", element: "paragraph"
+			input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
+		}
+	}
+
+	tiles(scale: 2) {
+		multiAttributeTile(name:"contact", type: "generic", width: 6, height: 4){
+			tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
+				attributeState "open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#53a7c0"
+				attributeState "closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#ffffff"
+				attributeState "tamper alert with open", label:'tamper', icon:"st.contact.contact.open", backgroundColor:"#cc0000"
+				attributeState "tamper alert with closed", label:'tamper', icon:"st.contact.contact.closed", backgroundColor:"#cc0000"
+			}
+		}
+		valueTile("temperature", "device.temperature", width: 2, height: 2) {
+			state("temperature", label:'${currentValue}°', unit:"F",
+				backgroundColors:[
+					[value: 31, color: "#153591"],
+					[value: 44, color: "#1e9cbb"],
+					[value: 59, color: "#90d2a7"],
+					[value: 74, color: "#44b621"],
+					[value: 84, color: "#f1d801"],
+					[value: 95, color: "#d04e00"],
+					[value: 96, color: "#bc2323"]
+				]
+			)
+		}
+		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
+			state "battery", label:'${currentValue}% battery', unit:""
+		}
+		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+		standardTile("rssi", "device.rssi", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
+			state "rssi", label:'${currentValue}% rssi', unit:""
+		}
+
+		main(["contact"])
+		details(["contact", "temperature", "battery", "refresh", "rssi"])
+	}
+}
+
+def parse(String description) {
+	log.debug "description: $description"
+
+	Map map = [:]
+	if (description?.startsWith('catchall:')) {
+		map = parseCatchAllMessage(description)
+	}
+	else if (description?.startsWith('read attr -')) {
+		map = parseReportAttributeMessage(description)
+	}
+	else if (description?.startsWith('temperature: ')) {
+		map = parseCustomMessage(description)
+	}
+	else if (description?.startsWith('zone status')) {
+		map = parseIasMessage(description)
+	}
+
+	log.debug "Parse returned $map"
+	def result = map ? createEvent(map) : null
+
+	if (description?.startsWith('enroll request')) {
+		List cmds = enrollResponse()
+		log.debug "enroll response: ${cmds}"
+		result = cmds?.collect { new physicalgraph.device.HubAction(it) }
+	}
+	return result
+}
+
+private Map parseCatchAllMessage(String description) {
+	Map resultMap = [:]
+	def cluster = zigbee.parse(description)
+	if (shouldProcessMessage(cluster)) {
+		switch(cluster.clusterId) {
+			case 0x0001:
+				resultMap = getBatteryResult(cluster.data.last())
+				break
+
+			case 0x0402:
+				// temp is last 2 data values. reverse to swap endian
+				String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+				def value = getTemperature(temp)
+				resultMap = getTemperatureResult(value)
+				break
+
+			case 0x0b05:
+				log.debug 'Diag'
+				break
+		}
+	}
+
+	return resultMap
+}
+
+private boolean shouldProcessMessage(cluster) {
+	// 0x0B is default response indicating message got through
+	// 0x07 is bind message
+	boolean ignoredMessage = cluster.profileId != 0x0104 ||
+		cluster.command == 0x0B ||
+		cluster.command == 0x07 ||
+		(cluster.data.size() > 0 && cluster.data.first() == 0x3e)
+	return !ignoredMessage
+}
+
+private Map parseReportAttributeMessage(String description) {
+	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
+		def nameAndValue = param.split(":")
+		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
+	}
+	log.debug "Desc Map: $descMap"
+
+	Map resultMap = [:]
+	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
+		def value = getTemperature(descMap.value)
+		resultMap = getTemperatureResult(value)
+	}
+	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
+		resultMap = getBatteryResult(Integer.parseInt(descMap.value, 16))
+	}
+	else if (descMap.cluster == "0B05" && descMap.attrId == "011d") {
+		resultMap = getRssiResult(Integer.parseInt(descMap.value, 16))
+    }
+
+	return resultMap
+}
+
+private Map parseCustomMessage(String description) {
+	Map resultMap = [:]
+	if (description?.startsWith('temperature: ')) {
+		def value = zigbee.parseHATemperatureValue(description, "temperature: ", getTemperatureScale())
+		resultMap = getTemperatureResult(value)
+	}
+	return resultMap
+}
+
+private Map parseIasMessage(String description) {
+	List parsedMsg = description.split(' ')
+	String msgCode = parsedMsg[2]
+
+	Map resultMap = [:]
+	switch(msgCode) {
+		case '0x0000': // Closed
+            resultMap = getContactResult('closed')
+			break
+
+		case '0x0001': // Open/Alarm1
+			resultMap = getContactResult('open')
+			break
+
+		case '0x0004': // Closed & Tamper
+			resultMap = getContactResult('tamper alert with closed')
+			break
+
+		case '0x0005': // Open & Tamper
+            resultMap = getContactResult('tamper alert with open')
+			break
+
+		default :
+			log.warn "ZoneStatus not support!"
+			break
+	}
+	return resultMap
+}
+
+def getTemperature(value) {
+	def celsius = Integer.parseInt(value, 16).shortValue() / 100
+	if(getTemperatureScale() == "C"){
+		return celsius
+	} else {
+		return celsiusToFahrenheit(celsius) as Integer
+	}
+}
+
+private Map getBatteryResult(rawValue) {
+	log.info "Battery rawValue = ${rawValue}"
+	def linkText = getLinkText(device)
+
+	def result = [
+		name: 'battery',
+		value: '--',
+		translatable: true
+	]
+
+	def volts = rawValue / 10
+
+	if (rawValue == 0 || rawValue == 255) {}
+	else {
+		if (volts > 3.5) {
+			result.descriptionText = "${device.displayName} battery has too much power: (> 3.5) volts."
+		}
+		else {
+				def minVolts = 2.1
+				def maxVolts = 3.2
+				def pct = (volts - minVolts) / (maxVolts - minVolts)
+				def roundedPct = Math.round(pct * 100)
+				result.value = Math.min(100, roundedPct)
+				result.descriptionText = "${device.displayName} battery was ${result.value}%"
+		}
+	}
+
+	return result
+}
+
+private Map getRssiResult(rawValue) {
+	log.info "RSSI rawValue = ${rawValue}"
+	def linkText = getLinkText(device)
+
+	def result = [
+		name: 'rssi',
+		value: '--',
+		translatable: true
+	]
+    
+	def pct = rawValue / 255
+	def roundedPct = Math.round(pct * 100)
+	result.value = Math.min(100, roundedPct)
+	result.descriptionText = "${device.displayName} RSSI was ${result.value}%"
+
+	return result
+}
+
+private Map getTemperatureResult(value) {
+	if (tempOffset) {
+		def offset = tempOffset as int
+		def v = value as int
+		value = v + offset
+	}
+    
+    log.info "Temperature is ${value}"
+    def descriptionText
+    if ( temperatureScale == 'C' )
+    	descriptionText = "${device.displayName} was ${value}°C"
+    else
+    	descriptionText = "${device.displayName} was ${value}°F"
+
+	return [
+		name: 'temperature',
+		value: value,
+		descriptionText: descriptionText,
+        translatable: true
+	]
+}
+
+private Map getContactResult(value) {
+	String descriptionText = "${device.displayName}"
+	return [
+		name: 'contact',
+		value: value,
+		descriptionText: descriptionText,
+        translatable: true
+	]
+}
+
+def refresh() {
+	log.debug "refresh called"
+	def refreshCmds = [
+		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
+		"st rattr 0x${device.deviceNetworkId} 1 0x001 0x20", "delay 200",
+		"st rattr 0x${device.deviceNetworkId} 1 0xb05 0x11d", "delay 200"
+	]
+
+	return refreshCmds
+}
+
+def configure() {
+	sendEvent(name: "checkInterval", value: 7200, displayed: false)
+
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
+	log.debug "Configuring Reporting, IAS CIE, and Bindings."
+	log.debug "${device.hub.zigbeeEui}. ${zigbeeEui}"
+
+	def configCmds = [
+		/* Write CIE */
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 2000",
+
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 500",
+		"zcl global send-me-a-report 0x0001 0x20 0x20 30 21600 {02}",		//Battery Voltage 6 hrs
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 1000",
+
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x402 {${device.zigbeeId}} {}", "delay 500",
+		"zcl global send-me-a-report 0x0402 0 0x29 30 3600 {C800}",		//Temperature 1 hr
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 1000",
+
+		//Set long poll interval to 5 min
+		"raw 0x0020 {11 00 02 b0 04 00 00}", 
+		"send 0x${device.deviceNetworkId} 1 1", "delay 500"
+	]
+	return configCmds + refresh() // send refresh cmds as part of config
+}
+
+def enrollResponse() {
+	log.debug "Sending enroll response"
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
+	[
+		//Enroll Response
+		"raw 0x500 {01 23 00 00 00}",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 200"
+	]
+}
+
+private getEndpointId() {
+	new BigInteger(device.endpointId, 16).toString()
+}
+
+private hex(value) {
+	new BigInteger(Math.round(value).toString()).toString(16)
+}
+
+private String swapEndianHex(String hex) {
+	reverseArray(hex.decodeHex()).encodeHex()
+}
+
+private byte[] reverseArray(byte[] array) {
+	int i = 0;
+	int j = array.length - 1;
+	byte tmp;
+	while (j > i) {
+		tmp = array[j];
+		array[j] = array[i];
+		array[i] = tmp;
+		j--;
+		i++;
+	}
+	return array
+}
\ No newline at end of file