Update Fibaro Flood Sensor configuration

ICP-399 ICP-398

devicetypes/fibargroup/fibaro-flood-sensor-zw5.src/fibaro-flood-sensor-zw5.groovy

@@ -24,10 +24,11 @@ metadata {
 		capability "Health Check"
 
 		fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x22, 0x85, 0x59, 0x20, 0x80, 0x70, 0x56, 0x5A, 0x7A, 0x72, 0x8E, 0x71, 0x73, 0x98, 0x9C, 0x31, 0x86", outClusters: ""
+		fingerprint mfr:"010F", prod:"0B01", model:"2002"
+		fingerprint mfr:"010F", prod:"0B01", model:"1002"
 	}
 
 	simulator {
-    
 	}
 
 	tiles(scale: 2) {
@@ -123,11 +124,9 @@ def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd)
 {
 	def event = createEvent(descriptionText: "${device.displayName} woke up", displayed: false)
 	def cmds = []
+	// cmds << encap(zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 1, scale: 0))
+	// cmds << "delay 500"
 	cmds << encap(zwave.batteryV1.batteryGet())
-    cmds << "delay 500"
-    cmds << encap(zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 1, scale: 0))    
-    cmds << "delay 1200"
-    cmds << encap(zwave.wakeUpV1.wakeUpNoMoreInformation())
 	[event, response(cmds)]
 }
 
@@ -144,7 +143,7 @@ def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.DeviceSpecifi
 	log.debug "deviceIdDataLengthIndicator: ${cmd.deviceIdDataLengthIndicator}"
 	log.debug "deviceIdType:                ${cmd.deviceIdType}"
 
-    if (cmd.deviceIdType == 1 && cmd.deviceIdDataFormat == 1) {//serial number in binary format
+	if (cmd.deviceIdType == 1 && cmd.deviceIdDataFormat == 1) { //serial number in binary format
 		String serialNumber = "h'"
 
 		cmd.deviceIdData.each{ data ->
@@ -154,6 +153,19 @@ def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.DeviceSpecifi
 		updateDataValue("serialNumber", serialNumber)
 		log.debug "${device.displayName} - serial number: ${serialNumber}"
 	}
+
+	def response_cmds = []
+	if (!device.currentState("temperature")) {
+		response_cmds << encap(zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 1, scale: 0))
+	}
+	if (!getDataValue("version") && !zwaveInfo.ver) {
+		log.debug "Requesting Version Report"
+		response_cmds << "delay 500"
+		response_cmds << encap(zwave.versionV1.versionGet())
+	}
+	response_cmds << "delay 1000"
+	response_cmds << encap(zwave.wakeUpV2.wakeUpNoMoreInformation())
+	[[:], response(response_cmds)]
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd) {
@@ -166,12 +178,20 @@ def zwaveEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd) {
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
+	def result = []
 	def map = [:]
 	map.name = "battery"
 	map.value = cmd.batteryLevel == 255 ? 1 : cmd.batteryLevel.toString()
 	map.unit = "%"
-	map.displayed = true
-	createEvent(map)
+
+	result << createEvent(map)
+
+	if (!getDataValue("serialNumber")) {
+		result << response(encap(zwave.manufacturerSpecificV2.deviceSpecificGet()))
+	} else {
+		result << response(encap(zwave.wakeUpV2.wakeUpNoMoreInformation()))
+	}
+	result
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cmd) {
@@ -229,21 +249,18 @@ def zwaveEvent(physicalgraph.zwave.commands.deviceresetlocallyv1.DeviceResetLoca
 
 def configure() {
 	log.debug "Executing 'configure'"
-	// Device-Watch simply pings if no device events received for 8 hrs & 2 minutes
+	// Device wakes up every 4 hours, this interval of 8h 2m allows us to miss one wakeup notification before marking offline
 	sendEvent(name: "checkInterval", value: 8 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 
+	// default initial state
+	sendEvent(name: "water", value: "dry")
+
 	def cmds = []
 
-	cmds += zwave.wakeUpV2.wakeUpIntervalSet(seconds:21600, nodeid: zwaveHubNodeId)//FGFS' default wake up interval
-    cmds += zwave.manufacturerSpecificV2.manufacturerSpecificGet()
-    cmds += zwave.manufacturerSpecificV2.deviceSpecificGet()
-    cmds += zwave.versionV1.versionGet()
-    cmds += zwave.batteryV1.batteryGet()
-    cmds += zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 1, scale: 0)
-    cmds += zwave.associationV2.associationSet(groupingIdentifier:1, nodeId: [zwaveHubNodeId])
-    cmds += zwave.wakeUpV2.wakeUpNoMoreInformation()
+	cmds << zwave.associationV2.associationSet(groupingIdentifier:1, nodeId: [zwaveHubNodeId])
+	cmds << zwave.batteryV1.batteryGet()  // other queries sent as response to BatteryReport
 
-	encapSequence(cmds, 500)
+	encapSequence(cmds, 200)
 }
 
 private secure(physicalgraph.zwave.Command cmd) {
@@ -260,13 +277,10 @@ private encapSequence(commands, delay=200) {
 }
 
 private encap(physicalgraph.zwave.Command cmd) {
-	def secureClasses = [0x20, 0x5A, 0x70, 0x71, 0x84, 0x85, 0x8E, 0x9C]
-
-	//todo: check if secure inclusion was successful
-    //if not do not send security-encapsulated command
-	if (secureClasses.find{ it == cmd.commandClassId }) {
-    	secure(cmd)
-    } else {
+	if (zwaveInfo.zw && !zwaveInfo.zw.contains("s")) {
+		// Secure inclusion failed
 		crc16(cmd)
+	} else {
+		secure(cmd)
 	}
 }

devicetypes/smartthings/fibaro-flood-sensor.src/fibaro-flood-sensor.groovy

@@ -47,6 +47,9 @@ metadata {
 		command    "test"
 
 		fingerprint deviceId: "0xA102", inClusters: "0x30,0x9C,0x60,0x85,0x8E,0x72,0x70,0x86,0x80,0x84"
+		fingerprint mfr:"010F", prod:"0000", model:"2002"
+		fingerprint mfr:"010F", prod:"0000", model:"1002"
+		fingerprint mfr:"010F", prod:"0B00", model:"1001"
 	}
 
 	simulator {
@@ -108,20 +111,11 @@ def parse(String description)
 {
 	def result = []
 
-    if (description == "updated") {
-    	if (!state.MSR) {
-			result << response(zwave.wakeUpV1.wakeUpIntervalSet(seconds: 60*60, nodeid:zwaveHubNodeId))
-			result << response(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
-		} 
-    } else {
 	def cmd = zwave.parse(description, [0x31: 2, 0x30: 1, 0x70: 2, 0x71: 1, 0x84: 1, 0x80: 1, 0x9C: 1, 0x72: 2, 0x56: 2, 0x60: 3])
 
 	if (cmd) {
 		result += zwaveEvent(cmd) //createEvent(zwaveEvent(cmd))   
 	}
-    }
-    
-    result << response(zwave.batteryV1.batteryGet().format())
 
 	if ( result[0] != null ) {
 		log.debug "Parse returned ${result}"
@@ -143,10 +137,9 @@ def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd) {
 	def result = [createEvent(descriptionText: "${device.displayName} woke up", isStateChange: false)]
 	if (!isConfigured()) {
 		// we're still in the process of configuring a newly joined device
-		result += lateConfigure(true)
+		result << lateConfigure(true)
 	} else {
-		result += response(zwave.wakeUpV1.wakeUpNoMoreInformation())
-        log.debug "We're done with WakeUp!"
+		result << response(zwave.wakeUpV1.wakeUpNoMoreInformation())
 	}
 	result
 }
@@ -305,9 +298,12 @@ def lateConfigure(setConf = False) {
  */
 def configure() {
 	log.debug "Configuring Device..."
-	// Device-Watch simply pings if no device events received for 8 hrs & 2 minutes
+	// Device wakes up every 4 hours, this interval allows us to miss one wakeup notification before marking offline
 	sendEvent(name: "checkInterval", value: 8 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 
+	// default initial state
+	sendEvent(name: "water", value: "dry")
+
 	def cmds = []
 
 	// send associate to group 2 to get alarm data
@@ -318,13 +314,15 @@ def configure() {
 	// send associate to group 3 to get sensor data reported only to hub
 	cmds << zwave.associationV2.associationSet(groupingIdentifier:3, nodeId:[zwaveHubNodeId]).format()
 
-	// temp hysteresis set to .5 degrees celcius
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,50], parameterNumber: 12, size: 2).format()
-    cmds << zwave.configurationV1.configurationGet(parameterNumber: 12).format()
-
 	// reporting frequency of temps and battery set to one hour
 	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,60*60], parameterNumber: 10, size: 2).format()
-    cmds << zwave.configurationV1.configurationGet(parameterNumber: 10).format()
+	// cmds << zwave.configurationV1.configurationGet(parameterNumber: 10).format()
+
+	// temp hysteresis set to .5 degrees celcius
+	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,50], parameterNumber: 12, size: 2).format()
+	// cmds << zwave.configurationV1.configurationGet(parameterNumber: 12).format()
+
+	cmds << zwave.batteryV1.batteryGet().format()
 
 	cmds << zwave.wakeUpV1.wakeUpNoMoreInformation().format()