Merge pull request #1125 from SmartThingsCommunity/staging

Rolling up staging to production for deployment

devicetypes/capabilities/beacon-capability.src/beacon-capability.groovy

@@ -1,37 +0,0 @@
-/**
- *  Copyright 2015 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-metadata {
-	definition (name: "Beacon Capability", namespace: "capabilities", author: "SmartThings") {
-		capability "Beacon"
-	}
-
-	simulator {
-		status "present": "beacon: present"
-		status "not present": "beacon: not present"
-	}
-
-	tiles {
-		standardTile("beacon", "device.beacon", width: 2, height: 2) {
-			state("not present", label:'not present', icon:"st.presence.tile.not-present", backgroundColor:"#ffffff")
-			state("present", label:'present', icon:"st.presence.tile.present", backgroundColor:"#53a7c0")
-		}
-		main "beacon"
-		details "beacon"
-	}
-}
-
-def parse(String description) {
-	def pair = description.split(":")
-	createEvent(name: pair[0].trim(), value: pair[1].trim())
-}

devicetypes/smartthings/nyce-motion-sensor.src/nyce-motion-sensor.groovy

@@ -13,7 +13,6 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
-import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
 metadata {
 	definition (name: "NYCE Motion Sensor", namespace: "smartthings", author: "SmartThings") {
@@ -144,14 +143,51 @@ private Map parseReportAttributeMessage(String description) {
  
 
 private Map parseIasMessage(String description) {
-	ZoneStatus zs = zigbee.parseZoneStatus(description)
+    List parsedMsg = description.split(' ')
-	Map resultMap = [:]
+    String msgCode = parsedMsg[2]
+    
+    Map resultMap = [:]
+    switch(msgCode) {
+        case '0x0030': // Closed/No Motion/Dry
+            log.debug 'no motion'
+            resultMap.name = 'motion'
+            resultMap.value = 'inactive'
+            break
 
-	result.name = 'motion'
+        case '0x0032': // Open/Motion/Wet
-	result.value = zs.isAlarm2Set() ? 'active' : 'inactive'
+            log.debug 'motion'
-	log.debug(zs.isAlarm2Set() ? 'motion' : 'no motion')
+            resultMap.name = 'motion'
+            resultMap.value = 'active'
+            break
 
-	return resultMap
+        case '0x0032': // Tamper Alarm
+        	log.debug 'motion with tamper alarm'
+            resultMap.name = 'motion'
+            resultMap.value = 'active'
+            break
+
+        case '0x0033': // Battery Alarm
+            break
+
+        case '0x0034': // Supervision Report
+        	log.debug 'no motion with tamper alarm'
+            resultMap.name = 'motion'
+            resultMap.value = 'inactive'
+            break
+
+        case '0x0035': // Restore Report
+            break
+
+        case '0x0036': // Trouble/Failure
+        	log.debug 'motion with failure alarm'
+            resultMap.name = 'motion'
+            resultMap.value = 'active'
+            break
+
+        case '0x0038': // Test Mode
+            break
+    }
+    return resultMap
 }
 
 def refresh()

devicetypes/smartthings/nyce-open-closed-sensor.src/nyce-open-closed-sensor.groovy

@@ -13,10 +13,7 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
-
+ 
-import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
-
-
 metadata {
 	definition (name: "NYCE Open/Closed Sensor", namespace: "smartthings", author: "NYCE") {
     	capability "Battery"
@@ -222,33 +219,40 @@ private Map parseReportAttributeMessage(String description) {
 }
 
 private List parseIasMessage(String description) {
-	ZoneStatus zs = zigbee.parseZoneStatus(description)
+	List parsedMsg = description.split(" ")
-	log.debug "parseIasMessage: $description"
+	String msgCode = parsedMsg[2]
 
 	List resultListMap = []
 	Map resultMap_battery = [:]
 	Map resultMap_battery_state = [:]
 	Map resultMap_sensor = [:]
 
-	resultMap_sensor.name = "contact"
+	// Relevant bit field definitions from ZigBee spec
-	resultMap_sensor.value = zs.isAlarm1Set() ? "open" : "closed"
+	def BATTERY_BIT = ( 1 << 3 )
+	def TROUBLE_BIT = ( 1 << 6 )
+	def SENSOR_BIT = ( 1 << 0 )		// it's ALARM1 bit from the ZCL spec
+
+	// Convert hex string to integer
+	def zoneStatus = Integer.parseInt(msgCode[-4..-1],16)
+
+	log.debug "parseIasMessage: zoneStatus: ${zoneStatus}"
 
 	// Check each relevant bit, create map for it, and add to list
-	log.debug "parseIasMessage: Battery Status ${zs.battery}"
+	log.debug "parseIasMessage: Battery Status ${zoneStatus & BATTERY_BIT}"
-	log.debug "parseIasMessage: Trouble Status ${zs.trouble}"
+	log.debug "parseIasMessage: Trouble Status ${zoneStatus & TROUBLE_BIT}"
-	log.debug "parseIasMessage: Sensor Status ${zs.alarm1}"
+	log.debug "parseIasMessage: Sensor Status ${zoneStatus & SENSOR_BIT}"
 
 	/* 	Comment out this path to check the battery state to avoid overwriting the
 		battery value (Change log #2), but keep these conditions for later use
 	 resultMap_battery_state.name = "battery_state"
-	 if (zs.isTroubleSet()) {
+	 if (zoneStatus & TROUBLE_BIT) {
 		 resultMap_battery_state.value = "failed"
 
 		 resultMap_battery.name = "battery"
 		 resultMap_battery.value = 0
 	 }
 	 else {
-		 if (zs.isBatterySet()) {
+		 if (zoneStatus & BATTERY_BIT) {
 			 resultMap_battery_state.value = "low"
 
 			 // to generate low battery notification by the platform
@@ -266,6 +270,9 @@ private List parseIasMessage(String description) {
 	 }
 	*/
 
+	resultMap_sensor.name = "contact"
+	resultMap_sensor.value = (zoneStatus & SENSOR_BIT) ? "open" : "closed"
+
 	resultListMap << resultMap_battery_state
 	resultListMap << resultMap_battery
 	resultListMap << resultMap_sensor

devicetypes/smartthings/smartpower-outlet.src/smartpower-outlet.groovy

@@ -101,12 +101,6 @@ def parse(String description) {
 		else {
 			def descriptionText = finalResult.value == "on" ? '{{ device.displayName }} is On' : '{{ device.displayName }} is Off'
 			sendEvent(name: finalResult.type, value: finalResult.value, descriptionText: descriptionText, translatable: true)
-			// Temporary fix for the case when Device is OFFLINE and is connected again
-			if (state.lastOnOff == null){
-				state.lastOnOff = now()
-				sendEvent(name: "deviceWatch-lastActivity", value: state.lastOnOff, description: "Last Activity is on ${new Date(state.lastOnOff)}", displayed: false, isStateChange: true)
-			}
-			state.lastOnOff = now()
 		}
 	}
 	else {
@@ -122,24 +116,9 @@ def off() {
 def on() {
 	zigbee.on()
 }
-/**
- * PING is used by Device-Watch in attempt to reach the Outlet
- * */
-def ping() {
-
-	// send read attribute onOFF if the last time we heard from the outlet is outside of the checkInterval
-	if (state.lastOnOff < (now() - (1000 * device.currentValue("checkInterval"))) ){
-		log.info "ping, alive=no, lastOnOff=${new Date(state.lastOnOff)}"
-		state.lastOnOff = null
-		return zigbee.onOffRefresh()
-	} else { // if the last onOff activity is within the checkInterval we artificially create a Device-Watch event
-		log.info "ping, alive=yes, lastOnOff=${new Date(state.lastOnOff)}"
-		sendEvent(name: "deviceWatch-lastActivity", value: state.lastOnOff, description: "Last Activity is on ${new Date(state.lastOnOff)}", displayed: false, isStateChange: true)
-	}
-}
 
 def refresh() {
-	zigbee.onOffRefresh() + zigbee.electricMeasurementPowerRefresh()
+	zigbee.onOffRefresh() + zigbee.refreshData("0x0B04", "0x050B")
 }
 
 def configure() {

devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy

@@ -13,8 +13,6 @@
  *  License for the specific language governing permissions and limitations
  *  under the License.
  */
-import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
-
 
 metadata {
 	definition (name: "SmartSense Moisture Sensor",namespace: "smartthings", author: "SmartThings", category: "C2") {
@@ -24,7 +22,6 @@ metadata {
 		capability "Temperature Measurement"
 		capability "Water Sensor"
 		capability "Health Check"
-		capability "Sensor"		
 
 		command "enrollResponse"
 
@@ -172,9 +169,42 @@ private Map parseCustomMessage(String description) {
 }
 
 private Map parseIasMessage(String description) {
-	ZoneStatus zs = zigbee.parseZoneStatus(description)
+	List parsedMsg = description.split(' ')
+	String msgCode = parsedMsg[2]
 
-	return zs.isAlarm1Set() ? getMoistureResult('wet') : getMoistureResult('dry')
+	Map resultMap = [:]
+	switch(msgCode) {
+		case '0x0020': // Closed/No Motion/Dry
+			resultMap = getMoistureResult('dry')
+			break
+
+		case '0x0021': // Open/Motion/Wet
+			resultMap = getMoistureResult('wet')
+			break
+
+		case '0x0022': // Tamper Alarm
+			break
+
+		case '0x0023': // Battery Alarm
+			break
+
+		case '0x0024': // Supervision Report
+			 log.debug 'dry with tamper alarm'
+			resultMap = getMoistureResult('dry')
+			break
+
+		case '0x0025': // Restore Report
+			log.debug 'water with tamper alarm'
+			resultMap = getMoistureResult('wet')
+			break
+
+		case '0x0026': // Trouble/Failure
+			break
+
+		case '0x0028': // Test Mode
+			break
+	}
+	return resultMap
 }
 
 def getTemperature(value) {

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -13,8 +13,6 @@
  *  License for the specific language governing permissions and limitations
  *  under the License.
  */
-import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
-
 
 metadata {
 	definition (name: "SmartSense Motion Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
@@ -24,7 +22,6 @@ metadata {
 		capability "Temperature Measurement"
 		capability "Refresh"
 		capability "Health Check"
-		capability "Sensor"		
 
 		command "enrollResponse"
 
@@ -185,10 +182,44 @@ private Map parseCustomMessage(String description) {
 }
 
 private Map parseIasMessage(String description) {
-	ZoneStatus zs = zigbee.parseZoneStatus(description)
+	List parsedMsg = description.split(' ')
+	String msgCode = parsedMsg[2]
 
-	// Some sensor models that use this DTH use alarm1 and some use alarm2 to signify motion
+	Map resultMap = [:]
-	return (zs.isAlarm1Set() || zs.isAlarm2Set()) ? getMotionResult('active') : getMotionResult('inactive')
+	switch(msgCode) {
+		case '0x0020': // Closed/No Motion/Dry
+			resultMap = getMotionResult('inactive')
+			break
+
+		case '0x0021': // Open/Motion/Wet
+			resultMap = getMotionResult('active')
+			break
+
+		case '0x0022': // Tamper Alarm
+			log.debug 'motion with tamper alarm'
+			resultMap = getMotionResult('active')
+			break
+
+		case '0x0023': // Battery Alarm
+			break
+
+		case '0x0024': // Supervision Report
+			log.debug 'no motion with tamper alarm'
+			resultMap = getMotionResult('inactive')
+			break
+
+		case '0x0025': // Restore Report
+			break
+
+		case '0x0026': // Trouble/Failure
+			log.debug 'motion with failure alarm'
+			resultMap = getMotionResult('active')
+			break
+
+		case '0x0028': // Test Mode
+			break
+	}
+	return resultMap
 }
 
 def getTemperature(value) {

devicetypes/smartthings/smartsense-motion-temp-sensor.src/smartsense-motion-temp-sensor.groovy

@@ -15,7 +15,6 @@
  */
 
 //DEPRECATED - Using the smartsense-motion-sensor.groovy DTH for this device. Users need to be moved before deleting this DTH
-import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
 metadata {
 	definition (name: "SmartSense Motion/Temp Sensor", namespace: "smartthings", author: "SmartThings") {
@@ -169,8 +168,44 @@ private Map parseCustomMessage(String description) {
 }
 
 private Map parseIasMessage(String description) {
-	ZoneStatus zs = zigbee.parseZoneStatus(description)
+    List parsedMsg = description.split(' ')
-	return zs.isAlarm1Set() ? getMotionResult('active') : getMotionResult('inactive')
+    String msgCode = parsedMsg[2]
+
+    Map resultMap = [:]
+    switch(msgCode) {
+        case '0x0020': // Closed/No Motion/Dry
+        	resultMap = getMotionResult('inactive')
+            break
+
+        case '0x0021': // Open/Motion/Wet
+        	resultMap = getMotionResult('active')
+            break
+
+        case '0x0022': // Tamper Alarm
+        	log.debug 'motion with tamper alarm'
+        	resultMap = getMotionResult('active')
+            break
+
+        case '0x0023': // Battery Alarm
+            break
+
+        case '0x0024': // Supervision Report
+        	log.debug 'no motion with tamper alarm'
+        	resultMap = getMotionResult('inactive')
+            break
+
+        case '0x0025': // Restore Report
+            break
+
+        case '0x0026': // Trouble/Failure
+        	log.debug 'motion with failure alarm'
+        	resultMap = getMotionResult('active')
+            break
+
+        case '0x0028': // Test Mode
+            break
+    }
+    return resultMap
 }
 
 def getTemperature(value) {

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -13,7 +13,6 @@
  *  License for the specific language governing permissions and limitations
  *  under the License.
  */
-import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
 metadata {
 	definition (name: "SmartSense Multi Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
@@ -225,13 +224,47 @@ private Map parseCustomMessage(String description) {
 }
 
 private Map parseIasMessage(String description) {
-	ZoneStatus zs = zigbee.parseZoneStatus(description)
+	List parsedMsg = description.split(' ')
+	String msgCode = parsedMsg[2]
+
 	Map resultMap = [:]
+	switch(msgCode) {
+		case '0x0020': // Closed/No Motion/Dry
+			if (garageSensor != "Yes"){
+				resultMap = getContactResult('closed')
+			}
+		break
 
-	if(garageSensor !=  "Yes") {
+		case '0x0021': // Open/Motion/Wet
-		resultMap = zs.isAlarm1Set() ? getContactResult('open') : getContactResult('closed')
+			if (garageSensor != "Yes"){
+				resultMap = getContactResult('open')
+			}
+		break
+
+		case '0x0022': // Tamper Alarm
+		break
+
+		case '0x0023': // Battery Alarm
+		break
+
+		case '0x0024': // Supervision Report
+			if (garageSensor != "Yes"){
+				resultMap = getContactResult('closed')
+			}
+		break
+
+		case '0x0025': // Restore Report
+			if (garageSensor != "Yes"){
+				resultMap = getContactResult('open')
+			}
+		break
+
+		case '0x0026': // Trouble/Failure
+		break
+
+		case '0x0028': // Test Mode
+		break
 	}
-
 	return resultMap
 }
 

devicetypes/smartthings/smartsense-open-closed-accelerometer-sensor.src/smartsense-open-closed-accelerometer-sensor.groovy

@@ -14,7 +14,6 @@
  *
  */
 //DEPRECATED - Using the smartsense-multi-sensor.groovy DTH for this device. Users need to be moved before deleting this DTH
-import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
  metadata {
  	definition (name: "SmartSense Open/Closed Accelerometer Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
@@ -25,7 +24,6 @@ import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
  		capability "Refresh"
  		capability "Temperature Measurement"
 		capability "Health Check"
-		capability "Sensor"
 
 		command "enrollResponse"
  	}
@@ -173,9 +171,40 @@ private Map parseCustomMessage(String description) {
 }
 
 private Map parseIasMessage(String description) {
-	ZoneStatus zs = zigbee.parseZoneStatus(description)
+	List parsedMsg = description.split(' ')
+	String msgCode = parsedMsg[2]
 
-	return zs.isAlarm1Set() ? getContactResult('open') : getContactResult('closed')
+	Map resultMap = [:]
+	switch(msgCode) {
+        case '0x0020': // Closed/No Motion/Dry
+        resultMap = getContactResult('closed')
+        break
+
+        case '0x0021': // Open/Motion/Wet
+        resultMap = getContactResult('open')
+        break
+
+        case '0x0022': // Tamper Alarm
+        break
+
+        case '0x0023': // Battery Alarm
+        break
+
+        case '0x0024': // Supervision Report
+        resultMap = getContactResult('closed')
+        break
+
+        case '0x0025': // Restore Report
+        resultMap = getContactResult('open')
+        break
+
+        case '0x0026': // Trouble/Failure
+        break
+
+        case '0x0028': // Test Mode
+        break
+    }
+    return resultMap
 }
 
 def getTemperature(value) {

devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy

@@ -13,7 +13,6 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
-import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
 metadata {
 	definition (name: "SmartSense Open/Closed Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
@@ -168,8 +167,40 @@ private Map parseCustomMessage(String description) {
 }
 
 private Map parseIasMessage(String description) {
-	ZoneStatus zs = zigbee.parseZoneStatus(description)
+    List parsedMsg = description.split(' ')
-	return zs.isAlarm1Set() ? getContactResult('open') : getContactResult('closed')
+    String msgCode = parsedMsg[2]
+
+    Map resultMap = [:]
+    switch(msgCode) {
+        case '0x0020': // Closed/No Motion/Dry
+        	resultMap = getContactResult('closed')
+            break
+
+        case '0x0021': // Open/Motion/Wet
+        	resultMap = getContactResult('open')
+            break
+
+        case '0x0022': // Tamper Alarm
+            break
+
+        case '0x0023': // Battery Alarm
+            break
+
+        case '0x0024': // Supervision Report
+        	resultMap = getContactResult('closed')
+            break
+
+        case '0x0025': // Restore Report
+        	resultMap = getContactResult('open')
+            break
+
+        case '0x0026': // Trouble/Failure
+            break
+
+        case '0x0028': // Test Mode
+            break
+    }
+    return resultMap
 }
 
 def getTemperature(value) {

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy

@@ -21,7 +21,6 @@ metadata {
 		capability "Temperature Measurement"
 		capability "Relative Humidity Measurement"
 		capability "Health Check"
-		capability "Sensor"
 
 		fingerprint endpointId: "01", inClusters: "0001,0003,0020,0402,0B05,FC45", outClusters: "0019,0003"
 	}

devicetypes/smartthings/testing/simulated-alarm.src/simulated-alarm.groovy

@@ -16,8 +16,6 @@
 metadata {
 	definition (name: "Simulated Alarm", namespace: "smartthings/testing", author: "SmartThings") {
 		capability "Alarm"
-		capability "Sensor"
-		capability "Actuator"
 	}
 
 	simulator {

devicetypes/smartthings/testing/simulated-color-control.src/simulated-color-control.groovy

@@ -1,8 +1,6 @@
 metadata {
 	definition (name: "Simulated Color Control", namespace: "smartthings/testing", author: "SmartThings") {
     	capability "Color Control"
-		capability "Sensor"
-		capability "Actuator"
 	}
 
 	simulator {

devicetypes/smartthings/testing/simulated-contact-sensor.src/simulated-contact-sensor.groovy

@@ -15,7 +15,6 @@ metadata {
 	// Automatically generated. Make future change here.
 	definition (name: "Simulated Contact Sensor", namespace: "smartthings/testing", author: "bob") {
 		capability "Contact Sensor"
-		capability "Sensor"
 
 		command "open"
 		command "close"

devicetypes/smartthings/testing/simulated-lock.src/simulated-lock.groovy

@@ -15,8 +15,6 @@ metadata {
 	// Automatically generated. Make future change here.
 	definition (name: "Simulated Lock", namespace: "smartthings/testing", author: "bob") {
 		capability "Lock"
-		capability "Sensor"
-		capability "Actuator"
 	}
 
 	// Simulated lock

devicetypes/smartthings/testing/simulated-motion-sensor.src/simulated-motion-sensor.groovy

@@ -15,7 +15,6 @@ metadata {
 	// Automatically generated. Make future change here.
 	definition (name: "Simulated Motion Sensor", namespace: "smartthings/testing", author: "bob") {
 		capability "Motion Sensor"
-		capability "Sensor"
 
 		command "active"
 		command "inactive"

devicetypes/smartthings/testing/simulated-presence-sensor.src/simulated-presence-sensor.groovy

@@ -15,7 +15,6 @@ metadata {
 	// Automatically generated. Make future change here.
 	definition (name: "Simulated Presence Sensor", namespace: "smartthings/testing", author: "bob") {
 		capability "Presence Sensor"
-		capability "Sensor"
 
 		command "arrived"
 		command "departed"

devicetypes/smartthings/testing/simulated-switch.src/simulated-switch.groovy

@@ -16,8 +16,6 @@ metadata {
     definition (name: "Simulated Switch", namespace: "smartthings/testing", author: "bob") {
 		capability "Switch"
         capability "Relay Switch"
-		capability "Sensor"
-		capability "Actuator"
 
 		command "onPhysical"
 		command "offPhysical"

devicetypes/smartthings/testing/simulated-temperature-sensor.src/simulated-temperature-sensor.groovy

@@ -16,7 +16,6 @@ metadata {
 	definition (name: "Simulated Temperature Sensor", namespace: "smartthings/testing", author: "SmartThings") {
 		capability "Temperature Measurement"
 		capability "Switch Level"
-		capability "Sensor"
 
 		command "up"
 		command "down"

devicetypes/smartthings/testing/simulated-thermostat.src/simulated-thermostat.groovy

@@ -16,8 +16,6 @@ metadata {
 	definition (name: "Simulated Thermostat", namespace: "smartthings/testing", author: "SmartThings") {
 		capability "Thermostat"
 		capability "Relative Humidity Measurement"
-		capability "Sensor"
-		capability "Actuator"
 
 		command "tempUp"
 		command "tempDown"

devicetypes/smartthings/testing/simulated-water-sensor.src/simulated-water-sensor.groovy

@@ -15,7 +15,6 @@ metadata {
 	// Automatically generated. Make future change here.
 	definition (name: "Simulated Water Sensor", namespace: "smartthings/testing", author: "SmartThings") {
 		capability "Water Sensor"
-		capability "Sensor"
         
         command "wet"
         command "dry"

devicetypes/smartthings/tyco-door-window-sensor.src/tyco-door-window-sensor.groovy

@@ -13,7 +13,6 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
-import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
 metadata {
 	definition (name: "Tyco Door/Window Sensor", namespace: "smartthings", author: "SmartThings") {
@@ -162,9 +161,40 @@ private Map parseCustomMessage(String description) {
 }
 
 private Map parseIasMessage(String description) {
-	ZoneStatus zs = zigbee.parseZoneStatus(description)
+    List parsedMsg = description.split(' ')
+    String msgCode = parsedMsg[2]
 
-	return zs.isAlarm1Set() ? getContactResult('open') : getContactResult('closed')
+    Map resultMap = [:]
+    switch(msgCode) {
+        case '0x0020': // Closed/No Motion/Dry
+        	resultMap = getContactResult('closed')
+            break
+
+        case '0x0021': // Open/Motion/Wet
+        	resultMap = getContactResult('open')
+            break
+
+        case '0x0022': // Tamper Alarm
+            break
+
+        case '0x0023': // Battery Alarm
+            break
+
+        case '0x0024': // Supervision Report
+        	resultMap = getContactResult('closed')
+            break
+
+        case '0x0025': // Restore Report
+        	resultMap = getContactResult('open')
+            break
+
+        case '0x0026': // Trouble/Failure
+            break
+
+        case '0x0028': // Test Mode
+            break
+    }
+    return resultMap
 }
 
 def getTemperature(value) {