MSA-1357: Nest Temp Info

Rolling down hotfix to master

devicetypes/smartthings-users/nest.src/nest.groovy

@@ -0,0 +1,600 @@
+/**
+ *  Nest Direct
+ *
+ *  Author: dianoga7@3dgo.net
+ *  Code: https://github.com/smartthings-users/device-type.nest
+ *
+ * INSTALLATION
+ * =========================================
+ * 1) Create a new device type (https://graph.api.smartthings.com/ide/devices)
+ *     Name: Nest
+ *     Author: dianoga7@3dgo.net
+ *     Capabilities:
+ *         Polling
+ *         Relative Humidity Measurement
+ *         Thermostat
+ *         Temperature Measurement
+ *         Presence Sensor
+ *         Sensor
+ *     Custom Attributes:
+ *         temperatureUnit
+ *     Custom Commands:
+ *         away
+ *         present
+ *         setPresence
+ *         heatingSetpointUp
+ *         heatingSetpointDown
+ *         coolingSetpointUp
+ *         coolingSetpointDown
+ *         setFahrenheit
+ *         setCelsius
+ *
+ * 2) If you want to switch from slider controls to buttons, comment out the slider details line and uncomment the button details line.
+ *
+ * 3) Create a new device (https://graph.api.smartthings.com/device/list)
+ *     Name: Your Choice
+ *     Device Network Id: Your Choice
+ *     Type: Nest (should be the last option)
+ *     Location: Choose the correct location
+ *     Hub/Group: Leave blank
+ *
+ * 4) Update device preferences
+ *     Click on the new device to see the details.
+ *     Click the edit button next to Preferences
+ *     Fill in your information.
+ *     To find your serial number, login to http://home.nest.com. Click on the thermostat
+ *     you want to control. Under settings, go to Technical Info. Your serial number is
+ *     the second item.
+ *
+ * 5) That's it, you're done.
+ *
+ * Copyright (C) 2013 Brian Steere <dianoga7@3dgo.net>
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of this
+ * software and associated documentation files (the "Software"), to deal in the Software
+ * without restriction, including without limitation the rights to use, copy, modify,
+ * merge, publish, distribute, sublicense, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to the following
+ * conditions: The above copyright notice and this permission notice shall be included
+ * in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,
+ * INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
+ * PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF
+ * CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE
+ * OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+preferences {
+	input("username", "text", title: "Username", description: "Your Nest username (usually an email address)")
+	input("password", "password", title: "Password", description: "Your Nest password")
+	input("serial", "text", title: "Serial #", description: "The serial number of your thermostat")
+}
+
+// for the UI
+metadata {
+	definition (name: "Nest", namespace: "smartthings-users", author: "dianoga7@3dgo.net") {
+		capability "Polling"
+		capability "Relative Humidity Measurement"
+		capability "Thermostat"
+		capability "Temperature Measurement"
+		capability "Presence Sensor"
+		capability "Sensor"
+
+		command "away"
+		command "present"
+		command "setPresence"
+		command "heatingSetpointUp"
+		command "heatingSetpointDown"
+		command "coolingSetpointUp"
+		command "coolingSetpointDown"
+		command "setFahrenheit"
+		command "setCelsius"
+
+		attribute "temperatureUnit", "string"
+	}
+
+	simulator {
+		// TODO: define status and reply messages here
+	}
+
+	tiles {
+		valueTile("temperature", "device.temperature", canChangeIcon: true, canChangeBackground:true) {
+			state("temperature", label: '${currentValue}°', backgroundColors: [
+				// Celsius Color Range
+				[value: 0, color: "#153591"],
+				[value: 7, color: "#1e9cbb"],
+				[value: 15, color: "#90d2a7"],
+				[value: 23, color: "#44b621"],
+				[value: 29, color: "#f1d801"],
+				[value: 33, color: "#d04e00"],
+				[value: 36, color: "#bc2323"],
+				// Fahrenheit Color Range
+				[value: 40, color: "#153591"],
+				[value: 44, color: "#1e9cbb"],
+				[value: 59, color: "#90d2a7"],
+				[value: 74, color: "#44b621"],
+				[value: 84, color: "#f1d801"],
+				[value: 92, color: "#d04e00"],
+				[value: 96, color: "#bc2323"]
+			]
+			)
+		}
+
+		standardTile("thermostatMode", "device.thermostatMode", inactiveLabel: true, decoration: "flat") {
+			state("auto", action:"thermostat.off", icon: "st.thermostat.auto")
+			state("off", action:"thermostat.cool", icon: "st.thermostat.heating-cooling-off")
+			state("cool", action:"thermostat.heat", icon: "st.thermostat.cool")
+			state("heat", action:"thermostat.auto", icon: "st.thermostat.heat")
+		}
+
+		standardTile("thermostatFanMode", "device.thermostatFanMode", inactiveLabel: true, decoration: "flat") {
+			state "auto", action:"thermostat.fanOn", icon: "st.thermostat.fan-auto"
+			state "on", action:"thermostat.fanCirculate", icon: "st.thermostat.fan-on"
+			state "circulate", action:"thermostat.fanAuto", icon: "st.thermostat.fan-circulate"
+		}
+
+		valueTile("heatingSetpoint", "device.heatingSetpoint") {
+			state "default", label:'${currentValue}°', unit:"Heat", backgroundColor:"#bc2323"
+		}
+
+		valueTile("coolingSetpoint", "device.coolingSetpoint") {
+			state "default", label:'${currentValue}°', unit:"Cool", backgroundColor:"#1e9cbb"
+		}
+
+		standardTile("thermostatOperatingState", "device.thermostatOperatingState", inactiveLabel: false, decoration: "flat") {
+			state "idle", action:"polling.poll", label:'${name}', icon: "st.sonos.pause-icon"
+			state "cooling", action:"polling.poll", label:'  ', icon: "st.thermostat.cooling", backgroundColor:"#1e9cbb"
+			state "heating", action:"polling.poll", label:'  ', icon: "st.thermostat.heating", backgroundColor:"#bc2323"
+			state "fan only", action:"polling.poll", label:'${name}', icon: "st.Appliances.appliances11"
+		}
+
+		valueTile("humidity", "device.humidity", inactiveLabel: false) {
+			state "default", label:'${currentValue}%', unit:"Humidity"
+		}
+
+		standardTile("presence", "device.presence", inactiveLabel: false, decoration: "flat") {
+			state "present", label:'${name}', action:"away", icon: "st.Home.home2"
+			state "not present", label:'away', action:"present", icon: "st.Transportation.transportation5"
+		}
+
+		standardTile("refresh", "device.thermostatMode", inactiveLabel: false, decoration: "flat") {
+			state "default", action:"polling.poll", icon:"st.secondary.refresh"
+		}
+
+		standardTile("temperatureUnit", "device.temperatureUnit", canChangeIcon: false) {
+			state "fahrenheit",  label: "°F", icon: "st.alarm.temperature.normal", action:"setCelsius"
+			state "celsius", label: "°C", icon: "st.alarm.temperature.normal", action:"setFahrenheit"
+		}
+
+		controlTile("heatSliderControl", "device.heatingSetpoint", "slider", height: 1, width: 2, inactiveLabel: false) {
+			state "setHeatingSetpoint", label:'Set temperature to', action:"thermostat.setHeatingSetpoint"
+		}
+		controlTile("coolSliderControl", "device.coolingSetpoint", "slider", height: 1, width: 2, inactiveLabel: false) {
+			state "setCoolingSetpoint", label:'Set temperature to', action:"thermostat.setCoolingSetpoint"
+		}
+
+		standardTile("heatingSetpointUp", "device.heatingSetpoint", canChangeIcon: false, inactiveLabel: false, decoration: "flat") {
+			state "heatingSetpointUp", label:'  ', action:"heatingSetpointUp", icon:"st.thermostat.thermostat-up", backgroundColor:"#bc2323"
+		}
+
+		standardTile("heatingSetpointDown", "device.heatingSetpoint", canChangeIcon: false, inactiveLabel: false, decoration: "flat") {
+			state "heatingSetpointDown", label:'  ', action:"heatingSetpointDown", icon:"st.thermostat.thermostat-down", backgroundColor:"#bc2323"
+		}
+
+		standardTile("coolingSetpointUp", "device.coolingSetpoint", canChangeIcon: false, inactiveLabel: false, decoration: "flat") {
+			state "coolingSetpointUp", label:'  ', action:"coolingSetpointUp", icon:"st.thermostat.thermostat-up", backgroundColor:"#1e9cbb"
+		}
+
+		standardTile("coolingSetpointDown", "device.coolingSetpoint", canChangeIcon: false, inactiveLabel: false, decoration: "flat") {
+			state "coolingSetpointDown", label:'  ', action:"coolingSetpointDown", icon:"st.thermostat.thermostat-down", backgroundColor:"#1e9cbb"
+		}
+
+		main(["temperature", "thermostatOperatingState", "humidity"])
+
+		// ============================================================
+		// Slider or Buttons...
+		// To expose buttons, comment out the first detials line below and uncomment the second details line below.
+		// To expose sliders, uncomment the first details line below and comment out the second details line below.
+
+		details(["temperature", "thermostatOperatingState", "humidity", "thermostatMode", "thermostatFanMode", "presence", "heatingSetpoint", "heatSliderControl", "coolingSetpoint", "coolSliderControl", "temperatureUnit", "refresh"])
+		// details(["temperature", "thermostatOperatingState", "humidity", "thermostatMode", "thermostatFanMode", "presence", "heatingSetpointDown", "heatingSetpoint", "heatingSetpointUp", "coolingSetpointDown", "coolingSetpoint", "coolingSetpointUp", "temperatureUnit", "refresh"])
+
+		// ============================================================
+
+	}
+
+}
+
+// parse events into attributes
+def parse(String description) {
+
+}
+
+// handle commands
+def setHeatingSetpoint(temp) {
+	def latestThermostatMode = device.latestState('thermostatMode')
+	def temperatureUnit = device.latestValue('temperatureUnit')
+
+	switch (temperatureUnit) {
+		case "celsius":
+			if (temp) {
+				if (temp < 9) {
+					temp = 9
+				}
+				if (temp > 32) {
+					temp = 32
+				}
+				if (latestThermostatMode.stringValue == 'auto') {
+					api('temperature', ['target_change_pending': true, 'target_temperature_low': temp]) {
+						sendEvent(name: 'heatingSetpoint', value: heatingSetpoint, unit: temperatureUnit, state: "heat")
+					}
+				} else if (latestThermostatMode.stringValue == 'heat') {
+					api('temperature', ['target_change_pending': true, 'target_temperature': temp]) {
+							sendEvent(name: 'heatingSetpoint', value: heatingSetpoint, unit: temperatureUnit, state: "heat")
+					}
+				}
+			}
+			break;
+		default:
+			if (temp) {
+				if (temp < 51) {
+					temp = 51
+				}
+				if (temp > 89) {
+					temp = 89
+				}
+				if (latestThermostatMode.stringValue == 'auto') {
+					api('temperature', ['target_change_pending': true, 'target_temperature_low': fToC(temp)]) {
+						sendEvent(name: 'heatingSetpoint', value: heatingSetpoint, unit: temperatureUnit, state: "heat")
+					}
+				} else if (latestThermostatMode.stringValue == 'heat') {
+					api('temperature', ['target_change_pending': true, 'target_temperature': fToC(temp)]) {
+						sendEvent(name: 'heatingSetpoint', value: heatingSetpoint, unit: temperatureUnit, state: "heat")
+					}
+				}
+			}
+			break;
+	}
+	poll()
+}
+
+def coolingSetpointUp(){
+	int newSetpoint = device.currentValue("coolingSetpoint") + 1
+	log.debug "Setting cool set point up to: ${newSetpoint}"
+	setCoolingSetpoint(newSetpoint)
+}
+
+def coolingSetpointDown(){
+	int newSetpoint = device.currentValue("coolingSetpoint") - 1
+	log.debug "Setting cool set point down to: ${newSetpoint}"
+	setCoolingSetpoint(newSetpoint)
+}
+
+def setCoolingSetpoint(temp) {
+	def latestThermostatMode = device.latestState('thermostatMode')
+	def temperatureUnit = device.latestValue('temperatureUnit')
+
+	switch (temperatureUnit) {
+		case "celsius":
+			if (temp) {
+				if (temp < 9) {
+					temp = 9
+				}
+				if (temp > 32) {
+					temp = 32
+				}
+				if (latestThermostatMode.stringValue == 'auto') {
+					api('temperature', ['target_change_pending': true, 'target_temperature_high': temp]) {
+						sendEvent(name: 'coolingSetpoint', value: coolingSetpoint, unit: temperatureUnit, state: "cool")
+					}
+				} else if (latestThermostatMode.stringValue == 'cool') {
+					api('temperature', ['target_change_pending': true, 'target_temperature': temp]) {
+						sendEvent(name: 'coolingSetpoint', value: coolingSetpoint, unit: temperatureUnit, state: "cool")
+					}
+				}
+			}
+			break;
+		default:
+			if (temp) {
+				if (temp < 51) {
+					temp = 51
+				}
+				if (temp > 89) {
+					temp = 89
+				}
+				if (latestThermostatMode.stringValue == 'auto') {
+					api('temperature', ['target_change_pending': true, 'target_temperature_high': fToC(temp)]) {
+						sendEvent(name: 'coolingSetpoint', value: coolingSetpoint, unit: temperatureUnit, state: "cool")
+					}
+				} else if (latestThermostatMode.stringValue == 'cool') {
+					api('temperature', ['target_change_pending': true, 'target_temperature': fToC(temp)]) {
+						sendEvent(name: 'coolingSetpoint', value: coolingSetpoint, unit: temperatureUnit, state: "cool")
+					}
+				}
+			}
+			break;
+	}
+	poll()
+}
+
+def heatingSetpointUp(){
+	int newSetpoint = device.currentValue("heatingSetpoint") + 1
+	log.debug "Setting heat set point up to: ${newSetpoint}"
+	setHeatingSetpoint(newSetpoint)
+}
+
+def heatingSetpointDown(){
+	int newSetpoint = device.currentValue("heatingSetpoint") - 1
+	log.debug "Setting heat set point down to: ${newSetpoint}"
+	setHeatingSetpoint(newSetpoint)
+}
+
+def setFahrenheit() {
+	def temperatureUnit = "fahrenheit"
+	log.debug "Setting temperatureUnit to: ${temperatureUnit}"
+	sendEvent(name: "temperatureUnit",   value: temperatureUnit)
+	poll()
+}
+
+def setCelsius() {
+	def temperatureUnit = "celsius"
+	log.debug "Setting temperatureUnit to: ${temperatureUnit}"
+	sendEvent(name: "temperatureUnit",   value: temperatureUnit)
+	poll()
+}
+
+def off() {
+	setThermostatMode('off')
+}
+
+def heat() {
+	setThermostatMode('heat')
+}
+
+def emergencyHeat() {
+	setThermostatMode('heat')
+}
+
+def cool() {
+	setThermostatMode('cool')
+}
+
+def auto() {
+	setThermostatMode('range')
+}
+
+def setThermostatMode(mode) {
+	mode = mode == 'emergency heat'? 'heat' : mode
+
+	api('thermostat_mode', ['target_change_pending': true, 'target_temperature_type': mode]) {
+		mode = mode == 'range' ? 'auto' : mode
+		sendEvent(name: 'thermostatMode', value: mode)
+		poll()
+	}
+}
+
+def fanOn() {
+	setThermostatFanMode('on')
+}
+
+def fanAuto() {
+	setThermostatFanMode('auto')
+}
+
+def fanCirculate() {
+	setThermostatFanMode('circulate')
+}
+
+def setThermostatFanMode(mode) {
+	def modes = [
+		on: ['fan_mode': 'on'],
+		auto: ['fan_mode': 'auto'],
+		circulate: ['fan_mode': 'duty-cycle', 'fan_duty_cycle': 900]
+	]
+
+	api('fan_mode', modes.getAt(mode)) {
+		sendEvent(name: 'thermostatFanMode', value: mode)
+		poll()
+	}
+}
+
+def away() {
+	setPresence('away')
+	sendEvent(name: 'presence', value: 'not present')
+}
+
+def present() {
+	setPresence('present')
+	sendEvent(name: 'presence', value: 'present')
+}
+
+def setPresence(status) {
+	log.debug "Status: $status"
+	api('presence', ['away': status == 'away', 'away_timestamp': new Date().getTime(), 'away_setter': 0]) {
+		poll()
+	}
+}
+
+def poll() {
+	log.debug "Executing 'poll'"
+	api('status', []) {
+		data.device = it.data.device.getAt(settings.serial)
+		data.shared = it.data.shared.getAt(settings.serial)
+		data.structureId = it.data.link.getAt(settings.serial).structure.tokenize('.')[1]
+		data.structure = it.data.structure.getAt(data.structureId)
+
+		data.device.fan_mode = data.device.fan_mode == 'duty-cycle'? 'circulate' : data.device.fan_mode
+		data.structure.away = data.structure.away ? 'away' : 'present'
+
+		log.debug(data.shared)
+
+		def humidity = data.device.current_humidity
+		def temperatureType = data.shared.target_temperature_type
+		def fanMode = data.device.fan_mode
+		def heatingSetpoint = '--'
+		def coolingSetpoint = '--'
+
+		temperatureType = temperatureType == 'range' ? 'auto' : temperatureType
+
+		sendEvent(name: 'humidity', value: humidity)
+		sendEvent(name: 'thermostatFanMode', value: fanMode)
+		sendEvent(name: 'thermostatMode', value: temperatureType)
+
+		def temperatureUnit = device.latestValue('temperatureUnit')
+
+		switch (temperatureUnit) {
+			case "celsius":
+				def temperature = Math.round(data.shared.current_temperature)
+				def targetTemperature = Math.round(data.shared.target_temperature)
+
+				if (temperatureType == "cool") {
+					coolingSetpoint = targetTemperature
+				} else if (temperatureType == "heat") {
+					heatingSetpoint = targetTemperature
+				} else if (temperatureType == "auto") {
+					coolingSetpoint = Math.round(data.shared.target_temperature_high)
+					heatingSetpoint = Math.round(data.shared.target_temperature_low)
+				}
+
+				sendEvent(name: 'temperature', value: temperature, unit: temperatureUnit, state: temperatureType)
+				sendEvent(name: 'coolingSetpoint', value: coolingSetpoint, unit: temperatureUnit, state: "cool")
+				sendEvent(name: 'heatingSetpoint', value: heatingSetpoint, unit: temperatureUnit, state: "heat")
+				break;
+			default:
+				def temperature = Math.round(cToF(data.shared.current_temperature))
+				def targetTemperature = Math.round(cToF(data.shared.target_temperature))
+
+				if (temperatureType == "cool") {
+					coolingSetpoint = targetTemperature
+				} else if (temperatureType == "heat") {
+					heatingSetpoint = targetTemperature
+				} else if (temperatureType == "auto") {
+					coolingSetpoint = Math.round(cToF(data.shared.target_temperature_high))
+					heatingSetpoint = Math.round(cToF(data.shared.target_temperature_low))
+				}
+
+				sendEvent(name: 'temperature', value: temperature, unit: temperatureUnit, state: temperatureType)
+				sendEvent(name: 'coolingSetpoint', value: coolingSetpoint, unit: temperatureUnit, state: "cool")
+				sendEvent(name: 'heatingSetpoint', value: heatingSetpoint, unit: temperatureUnit, state: "heat")
+				break;
+			}
+
+		switch (device.latestValue('presence')) {
+			case "present":
+				if (data.structure.away == 'away') {
+					sendEvent(name: 'presence', value: 'not present')
+				}
+				break;
+			case "not present":
+				if (data.structure.away == 'present') {
+					sendEvent(name: 'presence', value: 'present')
+				}
+				break;
+		}
+
+		if (data.shared.hvac_ac_state) {
+			sendEvent(name: 'thermostatOperatingState', value: "cooling")
+		} else if (data.shared.hvac_heater_state) {
+			sendEvent(name: 'thermostatOperatingState', value: "heating")
+		} else if (data.shared.hvac_fan_state) {
+			sendEvent(name: 'thermostatOperatingState', value: "fan only")
+		} else {
+			sendEvent(name: 'thermostatOperatingState', value: "idle")
+		}
+	}
+}
+
+def api(method, args = [], success = {}) {
+	if(!isLoggedIn()) {
+		log.debug "Need to login"
+		login(method, args, success)
+		return
+	}
+
+	def methods = [
+		'status': [uri: "/v2/mobile/${data.auth.user}", type: 'get'],
+		'fan_mode': [uri: "/v2/put/device.${settings.serial}", type: 'post'],
+		'thermostat_mode': [uri: "/v2/put/shared.${settings.serial}", type: 'post'],
+		'temperature': [uri: "/v2/put/shared.${settings.serial}", type: 'post'],
+		'presence': [uri: "/v2/put/structure.${data.structureId}", type: 'post']
+	]
+
+	def request = methods.getAt(method)
+
+	log.debug "Logged in"
+	doRequest(request.uri, args, request.type, success)
+}
+
+// Need to be logged in before this is called. So don't call this. Call api.
+def doRequest(uri, args, type, success) {
+	log.debug "Calling $type : $uri : $args"
+
+	if(uri.charAt(0) == '/') {
+		uri = "${data.auth.urls.transport_url}${uri}"
+	}
+
+	def params = [
+		uri: uri,
+		headers: [
+			'X-nl-protocol-version': 1,
+			'X-nl-user-id': data.auth.userid,
+			'Authorization': "Basic ${data.auth.access_token}"
+		],
+		body: args
+	]
+
+	def postRequest = { response ->
+		if (response.getStatus() == 302) {
+			def locations = response.getHeaders("Location")
+			def location = locations[0].getValue()
+			log.debug "redirecting to ${location}"
+			doRequest(location, args, type, success)
+		} else {
+			success.call(response)
+		}
+	}
+
+	try {
+		if (type == 'post') {
+			httpPostJson(params, postRequest)
+		} else if (type == 'get') {
+			httpGet(params, postRequest)
+		}
+	} catch (Throwable e) {
+		login()
+	}
+}
+
+def login(method = null, args = [], success = {}) {
+	def params = [
+		uri: 'https://home.nest.com/user/login',
+		body: [username: settings.username, password: settings.password]
+	]
+
+	httpPost(params) {response ->
+		data.auth = response.data
+		data.auth.expires_in = Date.parse('EEE, dd-MMM-yyyy HH:mm:ss z', response.data.expires_in).getTime()
+		log.debug data.auth
+
+		api(method, args, success)
+	}
+}
+
+def isLoggedIn() {
+	if(!data.auth) {
+		log.debug "No data.auth"
+		return false
+	}
+
+	def now = new Date().getTime();
+	return data.auth.expires_in > now
+}
+
+def cToF(temp) {
+	return (temp * 1.8 + 32).toDouble()
+}
+
+def fToC(temp) {
+	return ((temp - 32) / 1.8).toDouble()
+}

devicetypes/smartthings/zwave-door-window-sensor.src/zwave-door-window-sensor.groovy

@@ -29,6 +29,7 @@ metadata {
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x86,0x72,0x98", outClusters: "0x5A,0x82"
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x80,0x71,0x85,0x70,0x72,0x86,0x30,0x31,0x84,0x59,0x73,0x5A,0x8F,0x98,0x7A", outClusters:"0x20" // Philio multi+
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x72,0x5A,0x80,0x73,0x86,0x84,0x85,0x59,0x71,0x70,0x7A,0x98" // Vision door/window
+		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x98,0x86,0x72,0x5A,0x85,0x59,0x73,0x80,0x71,0x31,0x70,0x84,0x7A" // Vision Motion
 	}
 
 	// simulator metadata
@@ -263,5 +264,9 @@ def retypeBasedOnMSR() {
 			log.debug "Changing device type to Door / Window Sensor Plus (SG)"
 			setDeviceType("Door / Window Sensor Plus (SG)")
 			break
+		case "0109-2002-0205": // Vision Motion
+			log.debug "Changing device type to Vision Motion Sensor Plus (SG)"
+			setDeviceType("Vision Motion Sensor Plus (SG)")
+			break
 	}
 }

devicetypes/smartthings/zwave-plus-window-shade.src/zwave-plus-window-shade.groovy

@@ -1,244 +0,0 @@
-/**
- *  Copyright 2016 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-metadata {
-	definition (name: "Z-Wave Plus Window Shade", namespace: "smartthings", author: "SmartThings") {
-		capability "Window Shade"
-		capability "Battery"
-		capability "Refresh"
-		capability "Health Check"
-		capability "Actuator"
-		capability "Sensor"
-
-		command "stop"
-
-		capability "Switch Level"   // until we get a Window Shade Level capability
-		capability "Switch"  // temporary for use with Routines
-
-		// This device handler is specifically for position-aware window coverings
-		//
-		fingerprint type: "0x1107", cc: "0x5E,0x26", deviceJoinName: "Window Shade"
-		fingerprint type: "0x9A00", cc: "0x5E,0x26", deviceJoinName: "Window Shade"
-		fingerprint mfr:"026E", prod:"4353", model:"5A31", deviceJoinName: "Window Blinds"
-		fingerprint mfr:"026E", prod:"5253", model:"5A31", deviceJoinName: "Roller Shade"
-	}
-
-	simulator {
-		status "open":  "command: 2603, payload: FF"
-		status "closed": "command: 2603, payload: 00"
-		status "10%": "command: 2603, payload: 0A"
-		status "66%": "command: 2603, payload: 42"
-		status "99%": "command: 2603, payload: 63"
-		status "battery 100%": "command: 8003, payload: 64"
-		status "battery low": "command: 8003, payload: FF"
-
-		// reply messages
-		reply "2001FF,delay 1000,2602": "command: 2603, payload: 10 FF FE"
-		reply "200100,delay 1000,2602": "command: 2603, payload: 60 00 FE"
-		reply "200142,delay 1000,2602": "command: 2603, payload: 10 42 FE"
-		reply "200163,delay 1000,2602": "command: 2603, payload: 10 63 FE"
-	}
-
-	tiles(scale: 2) {
-		multiAttributeTile(name:"windowShade", type: "lighting", width: 6, height: 4, canChangeIcon: true){
-			tileAttribute ("device.windowShade", key: "PRIMARY_CONTROL") {
-				attributeState "open", label:'${name}', action:"close", icon:"st.doors.garage.garage-open", backgroundColor:"#79b821", nextState:"closing"
-				attributeState "closed", label:'${name}', action:"open", icon:"st.doors.garage.garage-closed", backgroundColor:"#ffffff", nextState:"opening"
-				attributeState "partiallyOpen", label:'Open', action:"close", icon:"st.doors.garage.garage-open", backgroundColor:"#79b821", nextState:"closing"
-				attributeState "opening", label:'${name}', action:"stop", icon:"st.doors.garage.garage-opening", backgroundColor:"#79b821", nextState:"partiallyOpen"
-				attributeState "closing", label:'${name}', action:"stop", icon:"st.doors.garage.garage-closing", backgroundColor:"#ffffff", nextState:"partiallyOpen"
-			}
-			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
-				attributeState "level", action:"setLevel"
-			}
-		}
-
-		standardTile("refresh", "device.refresh", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
-			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh", nextState: "disabled"
-			state "disabled", label:'', action:"", icon:"st.secondary.refresh"
-		}
-
-		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
-			state "battery", label:'${currentValue}% battery', unit:""
-		}
-
-		preferences {
-			input "preset", "number", title: "Default half-open position (1-100)", defaultValue: 50, required: false, displayDuringSetup: false
-		}
-
-		main(["windowShade"])
-		details(["windowShade", "refresh", "battery"])
-
-	}
-}
-
-def parse(String description) {
-	def result = null
-	//if (description =~ /command: 2603, payload: ([0-9A-Fa-f]{6})/)
-	// TODO: Workaround manual parsing of v4 multilevel report
-	def cmd = zwave.parse(description, [0x20: 1, 0x26: 3])  // TODO: switch to SwitchMultilevel v4 and use target value
-	if (cmd) {
-		result = zwaveEvent(cmd)
-	}
-	log.debug "Parsed '$description' to ${result.inspect()}"
-	return result
-}
-
-def getCheckInterval() {
-	// These are battery-powered devices, and it's not very critical
-	// to know whether they're online or not – 12 hrs
-	12 * 60 * 60
-}
-
-def installed() {
-	sendEvent(name: "checkInterval", value: checkInterval, displayed: false)
-}
-
-def updated() {
-	if (device.latestValue("checkInterval") != checkInterval) {
-		sendEvent(name: "checkInterval", value: checkInterval, displayed: false)
-	}
-	if (!device.latestState("battery")) {
-		response(zwave.batteryV1.batteryGet())
-	}
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) {
-	handleLevelReport(cmd)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd) {
-	handleLevelReport(cmd)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.switchmultilevelv3.SwitchMultilevelReport cmd) {
-	handleLevelReport(cmd)
-}
-
-private handleLevelReport(physicalgraph.zwave.Command cmd) {
-	def descriptionText = null
-	def shadeValue = null
-
-	def level = cmd.value as Integer
-	if (level >= 99) {
-		level = 99
-		shadeValue = "open"
-	} else if (level <= 0) {
-		level = 0  // unlike dimmer switches, the level isn't saved when closed
-		shadeValue = "closed"
-	} else {
-		shadeValue = "partiallyOpen"
-		descriptionText = "${device.displayName} shade is ${level}% open"
-	}
-	def levelEvent = createEvent(name: "level", value: level, unit: "%", displayed: false)
-	def stateEvent = createEvent(name: "windowShade", value: shadeValue, descriptionText: descriptionText, isStateChange: levelEvent.isStateChange)
-
-	def result = [stateEvent, levelEvent]
-	if (!state.lastbatt || now() - state.lastbatt > 24 * 60 * 60 * 1000) {
-		log.debug "requesting battery"
-		state.lastbatt = (now() - 23 * 60 * 60 * 1000) // don't queue up multiple battery reqs in a row
-		result << response(["delay 15000", zwave.batteryV1.batteryGet().format()])
-	}
-	result
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.switchmultilevelv3.SwitchMultilevelStopLevelChange cmd) {
-	[ createEvent(name: "windowShade", value: "partiallyOpen", displayed: false, descriptionText: "$device.displayName shade stopped"),
-	  response(zwave.switchMultilevelV1.switchMultilevelGet().format()) ]
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
-	def msr = String.format("%04X-%04X-%04X", cmd.manufacturerId, cmd.productTypeId, cmd.productId)
-	updateDataValue("MSR", msr)
-	if (cmd.manufacturerName) {
-		updateDataValue("manufacturer", cmd.manufacturerName)
-	}
-	createEvent([descriptionText: "$device.displayName MSR: $msr", isStateChange: false])
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
-	def map = [ name: "battery", unit: "%" ]
-	if (cmd.batteryLevel == 0xFF) {
-		map.value = 1
-		map.descriptionText = "${device.displayName} has a low battery"
-		map.isStateChange = true
-	} else {
-		map.value = cmd.batteryLevel
-	}
-	state.lastbatt = now()
-	createEvent(map)
-}
-
-def zwaveEvent(physicalgraph.zwave.Command cmd) {
-	log.debug "unhandled $cmd"
-	return []
-}
-
-def open() {
-	log.debug "open()"
-	/*delayBetween([
-			zwave.basicV1.basicSet(value: 0xFF).format(),
-			zwave.switchMultilevelV1.switchMultilevelGet().format()
-	], 1000)*/
-	zwave.basicV1.basicSet(value: 0xFF).format()
-}
-
-def close() {
-	log.debug "close()"
-	/*delayBetween([
-			zwave.basicV1.basicSet(value: 0x00).format(),
-			zwave.switchMultilevelV1.switchMultilevelGet().format()
-	], 1000)*/
-	zwave.basicV1.basicSet(value: 0).format()
-}
-
-def on() {
-	open()
-}
-
-def off() {
-	close()
-}
-
-def setLevel(value, duration = null) {
-	log.debug "setLevel(${value.inspect()})"
-	Integer level = value as Integer
-	if (level < 0) level = 0
-	if (level > 99) level = 99
-	if (!preset && level > 0 && level < 95) state.preset = level
-	delayBetween([
-			zwave.basicV1.basicSet(value: level).format(),
-			zwave.switchMultilevelV1.switchMultilevelGet().format()
-	])
-}
-
-def presetPosition() {
-	setLevel(preset ?: state.preset ?: 50)
-}
-
-def stop() {
-	log.debug "stop()"
-	zwave.switchMultilevelV3.switchMultilevelStopLevelChange().format()
-}
-
-def ping() {
-	zwave.switchMultilevelV1.switchMultilevelGet().format()
-}
-
-def refresh() {
-	log.debug "refresh()"
-	delayBetween([
-			zwave.switchMultilevelV1.switchMultilevelGet().format(),
-			zwave.batteryV1.batteryGet().format()
-	], 1500)
-}

smartapps/dianoga/netatmo-connect.src/netatmo-connect.groovy

@@ -337,10 +337,10 @@ def initialize() {
 
 	settings.devices.each {
 		def deviceId = it
-		def detail = state.deviceDetail[deviceId]
+		def detail = state?.deviceDetail[deviceId]
 
 		try {
-			switch(detail.type) {
+			switch(detail?.type) {
 				case 'NAMain':
 					log.debug "Base station"
 					createChildDevice("Netatmo Basestation", deviceId, "${detail.type}.${deviceId}", detail.module_name)
@@ -487,12 +487,12 @@ def poll() {
     log.debug "State: ${state.deviceState}"
 
 	settings.devices.each { deviceId ->
-		def detail = state.deviceDetail[deviceId]
+		def detail = state?.deviceDetail[deviceId]
-		def data = state.deviceState[deviceId]
+		def data = state?.deviceState[deviceId]
-		def child = children.find { it.deviceNetworkId == deviceId }
+		def child = children?.find { it.deviceNetworkId == deviceId }
 
 		log.debug "Update: $child";
-		switch(detail.type) {
+		switch(detail?.type) {
 			case 'NAMain':
 				log.debug "Updating NAMain $data"
 				child?.sendEvent(name: 'temperature', value: cToPref(data['Temperature']) as float, unit: getTemperatureScale())

smartapps/vlaminck/alfred-workflow.src/alfred-workflow.groovy

@@ -92,22 +92,87 @@ void updateLock() {
 
 private void updateAll(devices) {
 	def command = request.JSON?.command
-	if (command) {
+	def type = params.param1
-		devices."$command"()
+	if (!devices) {
+		httpError(404, "Devices not found")
+	}
+	
+	if (command){
+		devices.each { device ->
+			executeCommand(device, type, command)
+		}
 	}
 }
 
 private void update(devices) {
 	log.debug "update, request: ${request.JSON}, params: ${params}, devices: $devices.id"
 	def command = request.JSON?.command
-	if (command) {
+	def type = params.param1
-		def device = devices.find { it.id == params.id }
+	def device = devices?.find { it.id == params.id }
-		if (!device) {
+
-			httpError(404, "Device not found")
+	if (!device) {
-		} else {
+		httpError(404, "Device not found")
-			device."$command"()
-		}
 	}
+
+	if (command) {
+		executeCommand(device, type, command)
+	}
+}
+
+/**
+ * Validating the command passed by the user based on capability.
+ * @return boolean
+ */
+def validateCommand(device, deviceType, command) {
+	def capabilityCommands = getDeviceCapabilityCommands(device.capabilities)
+	def currentDeviceCapability = getCapabilityName(deviceType)
+	if (capabilityCommands[currentDeviceCapability]) {
+		return command in capabilityCommands[currentDeviceCapability] ? true : false
+	} else {
+		// Handling other device types here, which don't accept commands
+		httpError(400, "Bad request.")
+	}
+}
+
+/**
+ * Need to get the attribute name to do the lookup. Only
+ * doing it for the device types which accept commands
+ * @return attribute name of the device type
+ */
+def getCapabilityName(type) {
+    switch(type) {
+		case "switches":
+			return "Switch"
+		case "locks":
+			return "Lock"
+		default:
+			return type
+	}
+}
+
+/**
+ * Constructing the map over here of
+ * supported commands by device capability
+ * @return a map of device capability -> supported commands
+ */
+def getDeviceCapabilityCommands(deviceCapabilities) {
+	def map = [:]
+	deviceCapabilities.collect {
+		map[it.name] = it.commands.collect{ it.name.toString() }
+	}
+	return map
+}
+
+/**
+ * Validates and executes the command
+ * on the device or devices
+ */
+def executeCommand(device, type, command) {
+	if (validateCommand(device, type, command)) {
+		device."$command"()
+	} else {
+		httpError(403, "Access denied. This command is not supported by current capability.")
+	}	
 }
 
 private show(devices, name) {