MSA-1383: I developed this to work with GE Z-Wave switches. The application will use your presence to turn on some outside light when you arrive home only if the sun is down. When leaving the house if you turn the light switch on and off, on and off, then your outside light is in a timer mode. Additionally you can set another switch in your house to confirm that the outside lights are in timer mode.

devicetypes/keybounce/lannouncer-alerter.src/lannouncer-alerter.groovy

@@ -1,350 +0,0 @@
-/**
- *  LANnouncer Alerter (Formerly LANdroid - but Google didn't like that much.)
- *
- *  Requires the LANnouncer android app; https://play.google.com/store/apps/details?id=com.keybounce.lannouncer
- *  See http://www.keybounce.com/LANdroidHowTo/LANdroid.html for full downloads and instructions.
- *  SmartThings thread: https://community.smartthings.com/t/android-as-a-speech-alarm-device-released/30282/12
- *  
- * Note: Only Siren and Strobe from the U.I. or Alarm capabilities default to continuous.
- *
- *  Version 1.24 16 July 2016
- * 
- *
- *  Copyright 2015-2016 Tony McNamara
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- * To Do: Add string return to Image Capture attribute
- *
- */
-
-metadata {
-    definition (name: "LANnouncer Alerter", namespace: "KeyBounce", author: "Tony McNamara") {
-        capability "Alarm"
-        capability "Speech Synthesis"
-        capability "Notification"
-        capability "Tone"
-        capability "Image Capture"
-        attribute  "LANdroidSMS","string"
-        /* Per http://docs.smartthings.com/en/latest/device-type-developers-guide/overview.html#actuator-and-sensor */
-        capability "Sensor"
-        capability "Actuator"
-
-        // Custom Commands
-        /** Retrieve image, formatted for SmartThings, from camera by name. */
-        command "chime"
-        command "doorbell"
-        command "ipCamSequence", ["number"]
-        command "retrieveAndWait", ["string"]
-        command "retrieveFirstAndWait"
-        command "retrieveSecondAndWait"
-    }
-    preferences {
-        input("DeviceLocalLan", "string", title:"Android IP Address", description:"Please enter your tablet's I.P. address", defaultValue:"" , required: false, displayDuringSetup: true)
-        input("DevicePort", "string", title:"Android Port", description:"Port the Android device listens on", defaultValue:"1035", required: false, displayDuringSetup: true)
-        input("ReplyOnEmpty", "bool", title:"Say Nothing", description:"When no speech is found, announce LANdroid?  (Needed for the speech and notify tiles to work)", defaultValue: true, displayDuringSetup: true)
-        input("AlarmContinuous", "bool", title:"Continuous Alarm (vs 10 sec.)", description: "When on, the alarm will sound until Stop is issued.", defaultValue: false, displayDuringSetup: true)
-    }
-
-    simulator {
-        // reply messages
-        ["strobe","siren","both","off"].each 
-            {
-                reply "$it": "alarm:$it"
-            }
-    }
-
-    tiles {
-        standardTile("alarm", "device.alarm", width: 2, height: 2) {
-            state "off", label:'off', action:'alarm.both', icon:"st.alarm.alarm.alarm", backgroundColor:"#ffffff"
-            state "strobe", label:'strobe!', action:'alarm.off', icon:"st.Lighting.light11", backgroundColor:"#e86d13"
-            state "siren", label:'siren!', action:'alarm.off', icon:"st.alarm.alarm.alarm", backgroundColor:"#e86d13"
-            state "both", label:'alarm!', action:'alarm.off', icon:"st.alarm.alarm.alarm", backgroundColor:"#e86d13"
-        }
-        standardTile("strobe", "device.alarm", inactiveLabel: false, decoration: "flat") {
-            state "default", label:'', action:"alarm.strobe", icon:"st.secondary.strobe"
-        }
-        
-        standardTile("siren", "device.alarm", inactiveLabel: false, decoration: "flat") {
-            state "default", label:'', action:"alarm.siren", icon:"st.secondary.siren"
-        }
-        standardTile("off", "device.alarm", inactiveLabel: false, decoration: "flat") {
-            state "default", label:'Off', action:"alarm.off", icon:"st.quirky.spotter.quirky-spotter-sound-off"
-        }       
-        
-        /* Apparently can't show image attributes on tiles. */
-        standardTile("take", "device.image", width: 1, height: 1, canChangeIcon: false, canChangeBackground: false) 
-        {
-            state "take", label: "Take", action: "Image Capture.take", icon: "st.camera.camera", backgroundColor: "#FFFFFF", nextState:"taking"
-            state "taking", label:'Taking', action: "", icon: "st.camera.take-photo", backgroundColor: "#53a7c0"
-            state "image", label: "Take", action: "Image Capture.take", icon: "st.camera.camera", backgroundColor: "#FFFFFF", nextState:"taking"
-        }
-
-        
-        standardTile("speak", "device.speech", inactiveLabel: false, decoration: "flat") 
-        {
-            state "default", label:'Speak', action:"Speech Synthesis.speak", icon:"st.Electronics.electronics13"
-        }
-        standardTile("toast", "device.notification", inactiveLabel: false, decoration: "flat") {
-            state "default", label:'Notify', action:"notification.deviceNotification", icon:"st.Kids.kids1"
-        }
-        standardTile("beep", "device.tone", inactiveLabel: false, decoration: "flat") {
-            state "default", label:'Tone', action:"tone.beep", icon:"st.Entertainment.entertainment2"
-        }
-        carouselTile("cameraDetails", "device.image", width: 3, height: 2) { }
-
-        main (["alarm", "take"]);
-        details(["alarm","strobe","siren","off","speak", "take","toast","beep", "cameraDetails"]);
-    }
-}
-
-/** Generally matches TTSServer/app/build.gradle */
-String getVersion() {return "24 built July 2016";}
-
-
-// handle commands
-def off() {
-    log.debug "Executing 'off'"
-    sendEvent(name:"alarm", value:"off")
-    def command="&ALARM=STOP&FLASH=STOP&"+getDoneString();
-    sendCommands(command)
-}
-
-def strobe() {
-    log.debug "Executing 'strobe'"
-    // TODO: handle 'strobe' command
-    sendEvent(name:"alarm", value:"strobe")
-    def command="&FLASH=STROBE&"+getDoneString()
-    if (AlarmContinuous)
-    {
-        command="&FLASH=CONTINUOUS&"+getDoneString()
-    }
-    sendCommands(command)
-}
-
-def siren() {
-    log.debug "Executing 'siren'"
-    sendEvent(name:"alarm", value:"siren")
-    def command="&ALARM=SIREN&"+getDoneString()
-    if (AlarmContinuous)
-    {
-        command="&ALARM=SIREN:CONTINUOUS&"+getDoneString()
-    }
-    sendCommands(command)
-}
-
-def beep() {
-    log.debug "Executing 'beep'"
-    def command="&ALARM=CHIME&"+getDoneString()
-    sendCommands(command)
-}
-
-def both() {
-    log.debug "Executing 'both'"
-    sendEvent(name:"alarm", value:"both")
-    def command="&ALARM=ON&FLASH=ON&"+getDoneString()
-    if (AlarmContinuous)
-    {
-        command="&ALARM=SIREN:CONTINUOUS&FLASH=CONTINUOUS&"+getDoneString()
-    }
-    sendCommands(command)
-}
-
-
-def speak(toSay) {
-    log.debug "Executing 'speak'"
-    if (!toSay?.trim()) {
-        if (ReplyOnEmpty) {
-            toSay = "LANnouncer Version ${version}"
-        }
-    }
-
-    if (toSay?.trim()) {
-        def command="&SPEAK="+toSay+"&"+getDoneString()
-        sendCommands(command)
-    }
-}
-
-def deviceNotification(toToast) {
-    log.debug "Executing notification with "+toToast
-    if (!toToast?.trim()) {
-        if (ReplyOnEmpty) {
-            toToast = "LANnouncer Version ${version}";
-        }
-    }
-    if (toToast?.trim()) {
-        def command="&TOAST="+toToast+"&"+getDoneString()
-        sendCommands(command)
-    }
-}    
-
-def chime() {
-    log.debug "Executing 'chime'"
-    // TODO: handle 'siren' command
-    def command="&ALARM=CHIME&"+getDoneString()
-    sendCommands(command)
-}
-
-def doorbell() {
-    log.debug "Executing 'doorbell'"
-    // TODO: handle 'siren' command
-    def command="&ALARM=DOORBELL&"+getDoneString()
-    sendCommands(command)
-}
-
-def ipCamSequence(cameraNumber) {
-    if (cameraNumber == 1) {
-        def command="&RETRIEVESEQ=FIRST&"+getDoneString()
-        sendIPCommand(command, true)
-
-    } else {
-    def command="&RETRIEVESEQ=SECOND&"+getDoneString()
-    sendIPCommand(command, true)
-    }
-}
-
-
-def retrieveFirstAndWait() {
-    retrieveAndWait("FIRST");
-}
-def retrieveSecondAndWait() {
-    retrieveAndWait("SECOND");
-}
-def retrieveAndWait(cameraName) {
-    log.info("Requesting image from camera ${cameraName}");
-    def command="&RETRIEVE="+cameraName+"&STSHRINK=TRUE&"+getDoneString()
-    sendIPCommand(command, true)
-}
-
-
-def take() {
-    // This won't result in received file. Can't handle large or binaries in hub.
-    log.debug "Executing 'take'"
-    def command="&PHOTO=BACK&STSHRINK=TRUE&"+getDoneString()
-    sendIPCommand(command, true)
-}
-
-/* Send to IP and to SMS as appropriate */
-private sendCommands(command) {
-    log.info "Command request: "+command
-    sendSMSCommand(command)
-    sendIPCommand(command)
-}
-
-
-private sendIPCommand(commandString, sendToS3 = false) {
-    log.info "Sending command "+ commandString+" to "+DeviceLocalLan+":"+DevicePort
-    if (DeviceLocalLan?.trim()) {
-        def hosthex = convertIPtoHex(DeviceLocalLan)
-        def porthex = convertPortToHex(DevicePort)
-        device.deviceNetworkId = "$hosthex:$porthex"
-
-        def headers = [:] 
-        headers.put("HOST", "$DeviceLocalLan:$DevicePort")
-
-        def method = "GET"
-
-        def hubAction = new physicalgraph.device.HubAction(
-            method: method,
-            path: "/"+commandString,
-            headers: headers
-            );
-        if (sendToS3 == true)
-        {
-            hubAction.options = [outputMsgToS3:true];
-        }
-        log.debug hubActionw
-        hubAction;
-    }
-}
-
-private sendSMSCommand(commandString) {
-    def preface = "+@TTSSMS@+"
-    def smsValue = preface+"&"+commandString
-    state.lastsmscommand = smsValue
-    sendEvent(name: "LANdroidSMS", value: smsValue, isStateChange: true)
-    /*
-    if (SMSPhone?.trim()) {
-        sendSmsMessage(SMSPhone, preface+"&"+commandString)
-    }
-    */
-}
-
-private String getDoneString() {
-    return "@DONE@"
-}
-
-def parse(String description) {
-    log.debug "Parsing '${description}'"
-    def map = parseLanMessage(description);
-    log.debug "As LAN: " + map;
-    if ((map.headers) && (map.headers.'Content-Type' != null) && (map.headers.'Content-Type'.contains("image/jpeg")) )
-    {   //  Store the file
-      if(map.body) 
-      {
-            storeImage(getPictureName(), map.body);
-      }
-    }
-/* 'index:0F, mac:0073E023A13A, ip:C0A80114, port:040B, requestId:f9036fb2-9637-40b8-b2c5-71ba5a09fd3e, bucket:smartthings-device-conn-temp, key:fc8e3dfd-5035-40a2-8adc-a312926f9034' */
-
-    else if (map.bucket && map.key)
-    { //    S3 pointer; retrieve image from it to store.
-        try {
-            def s3ObjectContent; // Needed for scope of try-catch
-            def imageBytes = getS3Object(map.bucket, map.key + ".jpg")
-
-            if(imageBytes)
-            {
-                log.info ("Got image bytes; saving them.")
-                s3ObjectContent = imageBytes.getObjectContent()
-                def bytes = new ByteArrayInputStream(s3ObjectContent.bytes)
-                storeImage(getPictureName(), bytes)
-            }
-        }
-        catch(Exception e) 
-        {
-            log.error e
-        }
-        finally {
-            //explicitly close the stream
-            if (s3ObjectContent) { s3ObjectContent.close() }
-        }        
-    }
-}
-
-
-// Image Capture handling
-/* Note that images are stored in https://graph.api.smartthings.com/api/s3/smartthings-smartsense-camera/[IMAGE-ID4], 
- * where [IMAGE-ID] is listed in the IDE under My Devices > [Camera] > Current States: Image. That page is updated as pictures are taken.
- */
-
-
-private getPictureName() {
-    def pictureUuid = java.util.UUID.randomUUID().toString().replaceAll('-', '')
-    log.debug pictureUuid
-    def picName = device.deviceNetworkId.replaceAll(':', '') + "_$pictureUuid" + ".jpg"
-    return picName
-}
-
-
-private String convertIPtoHex(ipAddress) { 
-    String hex = ipAddress.tokenize( '.' ).collect {  String.format( '%02X', it.toInteger() ) }.join()
-    log.debug "IP address entered is $ipAddress and the converted hex code is $hex"
-    return hex
-
-}
-
-private String convertPortToHex(port) {
-    String hexport = port.toString().format( '%04X', port.toInteger() )
-    log.debug hexport
-    return hexport
-}
-
-

devicetypes/smartthings/aeon-multisensor-6.src/aeon-multisensor-6.groovy

@@ -22,7 +22,6 @@ metadata {
 		capability "Configuration"
 		capability "Sensor"
 		capability "Battery"
-		capability "Health Check"
 
 		attribute "tamper", "enum", ["detected", "clear"]
 		attribute "batteryStatus", "string"
@@ -327,9 +326,6 @@ def zwaveEvent(physicalgraph.zwave.Command cmd) {
 }
 
 def configure() {
-	// allow device user configured or default 16 min to check in; double the periodic reporting interval
-	sendEvent(name: "checkInterval", value: 2* timeOptionValueMap[reportInterval] ?: 2*8*60, displayed: false)
-
 	// This sensor joins as a secure device if you double-click the button to include it
 	log.debug "${device.displayName} is configuring its settings"
 	def request = []

devicetypes/smartthings/aeon-multisensor-gen5.src/aeon-multisensor-gen5.groovy

@@ -20,9 +20,6 @@ metadata {
 		capability "Configuration"
 		capability "Sensor"
 		capability "Battery"
-		capability "Health Check"
-
-		command "configureAfterSecure"
 
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x86,0x72,0x59,0x85,0x73,0x71,0x84,0x80,0x30,0x31,0x70,0x98,0x7A", outClusters:"0x5A"
 	}
@@ -248,8 +245,6 @@ def configureAfterSecure() {
 def configure() {
 	// log.debug "configure()"
     //["delay 30000"] + secure(zwave.securityV1.securityCommandsSupportedGet())
-	// allow device 16 min to check in; double the periodic reporting interval
-	sendEvent(name: "checkInterval", value: 2*8*60, displayed: false)
 }
 
 private setConfigured() {

devicetypes/smartthings/aeon-multisensor.src/aeon-multisensor.groovy

@@ -20,7 +20,6 @@ metadata {
 		capability "Illuminance Measurement"
 		capability "Sensor"
 		capability "Battery"
-		capability "Health Check"
 
 		fingerprint deviceId: "0x2001", inClusters: "0x30,0x31,0x80,0x84,0x70,0x85,0x72,0x86"
 	}
@@ -181,9 +180,6 @@ def zwaveEvent(physicalgraph.zwave.Command cmd) {
 }
 
 def configure() {
-	// allow device 10 min to check in; double the periodic reporting interval
-	sendEvent(name: "checkInterval", value: 2*5*60, displayed: false)
-
 	delayBetween([
 		// send binary sensor report instead of basic set for motion
 		zwave.configurationV1.configurationSet(parameterNumber: 5, size: 1, scaledConfigurationValue: 2).format(),

devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy

@@ -255,8 +255,7 @@ private Map getBatteryResult(rawValue) {
 				def minVolts = 2.1
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
-				def roundedPct = Math.round(pct * 100)
+				result.value = Math.min(100, (int) pct * 100)
-				result.value = Math.min(100, roundedPct)
 				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
 			}
 		}

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -271,8 +271,7 @@ private Map getBatteryResult(rawValue) {
 				def minVolts = 2.1
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
-				def roundedPct = Math.round(pct * 100)
+				result.value = Math.min(100, (int) pct * 100)
-				result.value = Math.min(100, roundedPct)
 				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
 			}
 		}

devicetypes/smartthings/smartsense-motion-temp-sensor.src/smartsense-motion-temp-sensor.groovy

@@ -240,8 +240,7 @@ private Map getBatteryResult(rawValue) {
 			def minVolts = 2.1
 			def maxVolts = 3.0
 			def pct = (volts - minVolts) / (maxVolts - minVolts)
-			def roundedPct = Math.round(pct * 100)
+			result.value = Math.min(100, (int) pct * 100)
-			result.value = Math.min(100, roundedPct)
 			result.descriptionText = "${linkText} battery was ${result.value}%"
 		}
 	}

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -338,8 +338,7 @@ private Map getBatteryResult(rawValue) {
 				def minVolts = 2.1
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
-				def roundedPct = Math.round(pct * 100)
+				result.value = Math.min(100, (int) pct * 100)
-				result.value = Math.min(100, roundedPct)
 				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
 			}
 		}

devicetypes/smartthings/smartsense-open-closed-accelerometer-sensor.src/smartsense-open-closed-accelerometer-sensor.groovy

@@ -234,8 +234,7 @@ def getTemperature(value) {
 			def minVolts = 2.1
 			def maxVolts = 3.0
 			def pct = (volts - minVolts) / (maxVolts - minVolts)
-			def roundedPct = Math.round(pct * 100)
+			result.value = Math.min(100, (int) pct * 100)
-			result.value = Math.min(100, roundedPct)
 			result.descriptionText = "${linkText} battery was ${result.value}%"
 		}
 

devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy

@@ -229,8 +229,7 @@ private Map getBatteryResult(rawValue) {
 		def minVolts = 2.1
     	def maxVolts = 3.0
 		def pct = (volts - minVolts) / (maxVolts - minVolts)
-		def roundedPct = Math.round(pct * 100)
+		result.value = Math.min(100, (int) pct * 100)
-		result.value = Math.min(100, roundedPct)
 		result.descriptionText = "${linkText} battery was ${result.value}%"
 	}
 

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy

@@ -205,8 +205,7 @@ private Map getBatteryResult(rawValue) {
 		def minVolts = 2.1
     	def maxVolts = 3.0
 		def pct = (volts - minVolts) / (maxVolts - minVolts)
-		def roundedPct = Math.round(pct * 100)
+		result.value = Math.min(100, (int) pct * 100)
-		result.value = Math.min(100, roundedPct)
 		result.descriptionText = "${linkText} battery was ${result.value}%"
 	}
 

devicetypes/smartthings/tyco-door-window-sensor.src/tyco-door-window-sensor.groovy

@@ -223,8 +223,7 @@ private Map getBatteryResult(rawValue) {
 		def minVolts = 2.1
     	def maxVolts = 3.0
 		def pct = (volts - minVolts) / (maxVolts - minVolts)
-		def roundedPct = Math.round(pct * 100)
+		result.value = Math.min(100, (int) pct * 100)
-		result.value = Math.min(100, roundedPct)
 		result.descriptionText = "${linkText} battery was ${result.value}%"
 	}
 

devicetypes/smartthings/zwave-door-window-sensor.src/zwave-door-window-sensor.groovy

@@ -28,6 +28,7 @@ metadata {
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x98"
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x86,0x72,0x98", outClusters: "0x5A,0x82"
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x80,0x71,0x85,0x70,0x72,0x86,0x30,0x31,0x84,0x59,0x73,0x5A,0x8F,0x98,0x7A", outClusters:"0x20" // Philio multi+
+		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x72,0x5A,0x80,0x73,0x84,0x85,0x59,0x71,0x70,0x7A,0x98" // Vision door/window
 	}
 
 	// simulator metadata
@@ -82,12 +83,12 @@ def updated() {
 		cmds = [
 			command(zwave.manufacturerSpecificV2.manufacturerSpecificGet()),
 			"delay 1200",
-			zwave.wakeUpV1.wakeUpNoMoreInformation().format()
+			zwave.wakeUpV1.wakeUpNoMoreInformation()
 		]
 	} else if (!state.lastbat) {
 		cmds = []
 	} else {
-		cmds = [zwave.wakeUpV1.wakeUpNoMoreInformation().format()]
+		cmds = [zwave.wakeUpV1.wakeUpNoMoreInformation()]
 	}
 	response(cmds)
 }

smartapps/gr8gitsby/timer-light.src/timer-light.groovy

@@ -0,0 +1,178 @@
+/**
+ *  Timer Light
+ *
+ *  Copyright 2016 Kevin Hill
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+ 
+import groovy.time.*
+
+definition(
+    name: "Timer Light",
+    namespace: "gr8gitsby",
+    author: "Kevin Hill",
+    description: "This puts outside lights on a timer",
+    category: "Convenience",
+    iconUrl: "https://source.unsplash.com/category/nature/60x60",
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
+    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png")
+
+
+preferences {
+	// Use a light swtich
+	section("Light Switch") {
+		// Capabilities link: http://docs.smartthings.com/en/latest/capabilities-reference.html
+        // Input data types: http://docs.smartthings.com/en/latest/device-type-developers-guide/device-preferences.html?highlight=input#supported-input-types
+        input "theSwitch", "capability.switch", title: "Pick your light switch"
+        input "confirmationSwitch", "capability.switch", title: "Pick the notification switch"
+        input "minutes", "number", title: "Enter the number of minutes you'd like the lights on"
+        input "person", "capability.presenceSensor", title: "When who arrives?"
+        
+        // When arrival is detected, if it is dark, turn on the outside lights
+	}
+}
+
+def installed() {
+	log.debug "Installed with settings: ${settings}"
+    subscribe(theSwitch, "switch", switchHandler)
+    subscribe(confirmationSwitch, "switch", confirmationSwitchHandler)
+	initialize()
+}
+
+def updated() {
+	log.debug "Updated with settings: ${settings}"
+	unsubscribe()
+	initialize()
+}
+
+def initialize() {
+	// This method sets up the app
+    subscribe(person, "presence", presenceChange)
+    state.Flashes = 4
+    initialSunPosition()
+}
+
+def presenceChange(evt){
+	log.debug("presenceChange")
+    // if someone arrives at night the lights will turn on
+    if("present" == evt.value){
+    	timerLight()
+    }
+}
+
+// Function to set lights on timer for person arriving
+def timerLight() {
+	log.debug(state.sunPosition)
+	if(state.sunPosition == "down"){
+    	light.on()
+    	runIn(60 * minutes, turnOff)
+    }
+}
+
+def turnOff(){
+	// This method turns off the ligt
+	theSwitch.off()
+    confirmationSwitch.off()
+}
+
+def initialSunPosition() {  
+	// This method determines if sun is down at time of initializtion and run sunsetHandler() if so
+
+	def s = getSunriseAndSunset(zipCode: "98052")
+	def now = new Date()
+    def riseTime = s.sunrise
+	def setTime = s.sunset
+
+    if(setTime.before(now)) {
+        sunsetHandler()
+        log.info "Sun is already down, run sunsetHandler"
+    }
+    else 
+    {	if (riseTime.after(now)) {
+        sunriseHandler()
+        log.info "Sun is up, run sunriseHandler"
+        }
+    } 
+}
+
+def sunriseHandler() {
+	// method to set the sun position when the sun rises
+    state.sunPosition = "up"
+}
+
+def sunsetHandler() {
+	// method to set the sun position when the sunsets
+    state.sunPosition = "down"
+}
+
+/*
+def switchHandler(evt) {
+	log.debug("switch Handler Fired")
+}
+*/
+def confirmationSwitchHandler(evt) {
+	state.Flashes = state.Flashes - 1
+    log.debug("Flashes: ${state.Flashes}")
+    log.debug("Event State: ${evt.value}")
+	if(evt.value == "on" && state.Flashes > 0) {
+    	runIn(2, turnOffConfirmationSwitch)
+    } else if(evt.value == "off" && state.Flashes > 0) {
+    	runIn(2, turnOnConfirmationSwitch)
+    }
+    
+    if(state.Flashes == 0){
+    	state.Flashes = 4
+    }
+}
+
+def turnOnConfirmationSwitch(){
+	confirmationSwitch.on()
+}
+
+def turnOffConfirmationSwitch(){
+	confirmationSwitch.off()
+}
+
+def switchHandler(evt){
+	log.debug("light Event handler fired")
+	// use Event rather than DeviceState because we may be changing DeviceState to only store changed values
+    def recentStates = theSwitch.eventsSince(new Date(now() - 4000), [all:true, max: 10]).findAll{it.name == "switch"}
+    log.debug "${recentStates?.size()} STATES FOUND, LAST AT ${recentStates ? recentStates[0].dateCreated : ''}"
+	//sendPush("Attempting to check light presses")
+
+    if (evt.value == "on") {
+        log.debug("==== ON ====")
+    }
+
+    log.debug(recentStates.size())
+    //if (evt.isPhysical()) {
+    
+		if (recentStates.size() >= 2) {
+        	 
+            log.debug "Outside light timer mode engaged"
+            def switchattr = confirmationSwitch.currentValue("switch")
+            log.debug "confirmationSwitch: $switchattr"
+            
+            confirmationSwitch.on()
+            
+            //alternativeSwitch.off()
+            //def message = "${location.name} executed ${settings.onPhrase} because ${evt.title} was tapped twice."
+            runIn(60 * minutes, turnOff)
+        } else {
+        	log.trace "Skipping digital on/off event"
+        }
+    
+	//log.debug("switch is on, turn off in $minutes")
+    //runIn(60*minutes, turnOff)
+    
+	//}
+}

smartapps/smartthings/gentle-wake-up.src/gentle-wake-up.groovy

@@ -720,7 +720,7 @@ def completionPercentage() {
 
 	def now = new Date().getTime()
 	def timeElapsed = now - atomicState.start
-	def totalRunTime = totalRunTimeMillis() ?: 1
+	def totalRunTime = totalRunTimeMillis()
 	def percentComplete = timeElapsed / totalRunTime * 100
 	log.debug "percentComplete: ${percentComplete}"
 

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -689,7 +689,7 @@ def parse(childDevice, description) {
             	log.warn "Parsing Body failed - trying again..."
                 poll()
             }
-            if (body instanceof java.util.Map) {
+            if (body instanceof java.util.HashMap) {
             	//poll response
                 def bulbs = getChildDevices()
                 for (bulb in body) {

smartapps/smartthings/logitech-harmony-connect.src/logitech-harmony-connect.groovy

@@ -688,7 +688,7 @@ def validateCommand(device, command) {
 	def capabilityCommands = getDeviceCapabilityCommands(device.capabilities)
 	def currentDeviceCapability = getCapabilityName(device)
 	if (currentDeviceCapability != "" && capabilityCommands[currentDeviceCapability]) {
-    return (command in capabilityCommands[currentDeviceCapability] || (currentDeviceCapability == "Switch" && command == "setLevel" && device.hasCommand("setLevel"))) ? true : false
+		return command in capabilityCommands[currentDeviceCapability] ? true : false
 	} else {
 		// Handling other device types here, which don't accept commands
 		httpError(400, "Bad request.")
@@ -823,8 +823,8 @@ def deviceHandler(evt) {
 }
 
 def sendToHarmony(evt, String callbackUrl) {
-  def callback = new URI(callbackUrl)
+	def callback = new URI(callbackUrl)
-  if (callback.port != -1) {
+  if(isIP(callback.host)){
   	def host = callback.port != -1 ? "${callback.host}:${callback.port}" : callback.host
   	def path = callback.query ? "${callback.path}?${callback.query}".toString() : callback.path
   	sendHubCommand(new physicalgraph.device.HubAction(
@@ -852,6 +852,25 @@ def sendToHarmony(evt, String callbackUrl) {
   }
 }
 
+public static boolean isIP(String str) {
+    try {
+         String[] parts = str.split("\\.");
+         if (parts.length != 4) return false;
+         for (int i = 0; i < 4; ++i) {
+             int p
+             try {
+               p = Integer.parseInt(parts[i]);
+             } catch (Exception e) {
+               return false;
+             }
+             if (p > 255 || p < 0) return false;
+         }
+         return true;
+    } catch (Exception e) {
+        return false;
+    }
+}
+
 def listHubs() {
 	location.hubs?.findAll { it.type.toString() == "PHYSICAL" }?.collect { hubItem(it) }
 }