MSA-1465: Dual Relay Module RSM2

devicetypes/dianoga/netatmo-additional-module.src/netatmo-additional-module.groovy

@@ -15,7 +15,6 @@
  */
 metadata {
 	definition (name: "Netatmo Additional Module", namespace: "dianoga", author: "Brian Steere") {
-		capability "Sensor"
 		capability "Relative Humidity Measurement"
 		capability "Temperature Measurement"
 

devicetypes/dianoga/netatmo-basestation.src/netatmo-basestation.groovy

@@ -15,7 +15,6 @@
  */
 metadata {
 	definition (name: "Netatmo Basestation", namespace: "dianoga", author: "Brian Steere") {
-		capability "Sensor"
 		capability "Relative Humidity Measurement"
 		capability "Temperature Measurement"
 

devicetypes/dianoga/netatmo-outdoor-module.src/netatmo-outdoor-module.groovy

@@ -15,7 +15,6 @@
  */
 metadata {
 	definition (name: "Netatmo Outdoor Module", namespace: "dianoga", author: "Brian Steere") {
-		capability "Sensor"
 		capability "Relative Humidity Measurement"
 		capability "Temperature Measurement"
 	}

devicetypes/dianoga/netatmo-rain.src/netatmo-rain.groovy

@@ -15,8 +15,6 @@
  */
 metadata {
 	definition (name: "Netatmo Rain", namespace: "dianoga", author: "Brian Steere") {
-		capability "Sensor"
-	
 		attribute "rain", "number"
         attribute "rainSumHour", "number"
         attribute "rainSumDay", "number"

devicetypes/enerwave-home-automation/zwn-rsm2-dual-relay-module.src/zwn-rsm2-dual-relay-module.groovy

@@ -0,0 +1,135 @@
+metadata {
+// Automatically generated. Make future change here.
+definition (name: "ZWN-RSM2 Dual Relay Module", namespace: "Enerwave Home Automation", author: "Enerwave Home Automation") {
+capability "Switch"
+capability "Refresh"
+capability "Configuration"
+capability "Actuator"
+command "reset"
+(1..2).each { n ->
+attribute "switch$n", "enum", ["on", "off"]
+command "on$n"
+command "off$n"
+}
+fingerprint deviceId: "0x1001", inClusters:
+"0x25,0x27,0x70,0x72,0x86,0x60"
+}
+// simulator metadata
+simulator {
+status "on": "command: 2003, payload: FF"
+status "off": "command: 2003, payload: 00"
+status "switch1 on": "command: 600D, payload: 01 00 25 03 FF"
+status "switch1 off": "command: 600D, payload: 01 00 25 03 00"
+status "switch2 on": "command: 600D, payload: 02 00 25 03 FF"
+status "switch2 off": "command: 600D, payload: 02 00 25 03 00"
+// reply messages
+reply "2001FF,delay 100,2502": "command: 2503, payload: FF"
+reply "200100,delay 100,2502": "command: 2503, payload: 00"
+}
+// tile definitions
+tiles {
+(1..2).each { n ->
+standardTile("switch$n", "switch$n", canChangeIcon: true) {
+state "on", label: '${name}', action: "off$n", icon:
+"st.switches.switch.on", backgroundColor: "#79b821"
+state "off", label: '${name}', action: "on$n", icon:
+"st.switches.switch.off", backgroundColor: "#ffffff"
+}
+}
+standardTile("refresh", "device.switch", inactiveLabel: false,
+decoration: "flat") {
+state "default", label:"", action:"refresh.refresh",
+icon:"st.secondary.refresh"
+}
+main(["switch1", "switch2"])
+details(["switch1",
+"switch2","refresh"])
+}
+}
+def parse(String description) {
+def result = null
+if (description.startsWith("Err")) {
+result = createEvent(descriptionText:description, isStateChange:true)
+} else if (description != "updated") {
+def cmd = zwave.parse(description, [0x60: 3, 0x25: 1, 0x20: 1])
+if (cmd) {
+result = zwaveEvent(cmd, null)
+}
+}
+log.debug "parsed '${description}' to ${result.inspect()}"
+result
+}
+def endpointEvent(endpoint, map) {
+if (endpoint) {
+map.name = map.name + endpoint.toString()
+}
+createEvent(map)
+}
+def
+zwaveEvent(physicalgraph.zwave.commands.multichannelv3.MultiChannelCmdEncap
+cmd, ep) {
+def encapsulatedCommand = cmd.encapsulatedCommand([0x32: 3, 0x25: 1,
+0x20: 1])
+if (encapsulatedCommand) {
+zwaveEvent(encapsulatedCommand, cmd.sourceEndPoint as Integer)
+}
+}
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd, endpoint) {
+def map = [name: "switch", type: "physical", value: (cmd.value ? "on" : "off")]
+def events = [endpointEvent(endpoint, map)]
+events
+}
+def zwaveEvent(physicalgraph.zwave.commands.switchbinaryv1.SwitchBinaryReport cmd, endpoint) {
+def map = [name: "switch", value: (cmd.value ? "on" : "off")]
+def events = [endpointEvent(endpoint, map)]
+events
+}
+def zwaveEvent(physicalgraph.zwave.Command cmd, ep) {
+log.debug "${device.displayName}: Unhandled ${cmd}" + (ep ? " from endpoint $ep" : "")
+}
+def onOffCmd(value, endpoint = null) {
+[
+encap(zwave.basicV1.basicSet(value: value), endpoint),
+"delay 500",
+encap(zwave.switchBinaryV1.switchBinaryGet(), endpoint),
+]
+}
+def on() { onOffCmd(0xFF) }
+def off() { onOffCmd(0x0) }
+def on1() { onOffCmd(0xFF, 1) }
+def on2() { onOffCmd(0xFF, 2) }
+//def on3() { onOffCmd(0xFF, 3) }
+//def on4() { onOffCmd(0xFF, 4) }
+def off1() { onOffCmd(0, 1) }
+def off2() { onOffCmd(0, 2) }
+//def off3() { onOffCmd(0, 3) }
+//def off4() { onOffCmd(0, 4) }
+def refresh() {
+delayBetween([
+encap(zwave.basicV1.basicGet(), 1), // further gets are sent from the basic report handler
+encap(zwave.basicV1.basicGet(), 2) // further gets are sent from the basic report handler
+],200)
+}
+def resetCmd(endpoint = null) {
+delayBetween([
+encap(zwave.meterV2.meterReset(), endpoint),
+encap(zwave.meterV2.meterGet(scale: 0), endpoint)
+])
+}
+def reset() {
+delayBetween([resetCmd(null), reset1(), reset2()])
+}
+def reset1() { resetCmd(1) }
+def reset2() { resetCmd(2) }
+//def reset3() { resetCmd(3) }
+//def reset4() { resetCmd(4) }
+def configure() {
+}
+private encap(cmd, endpoint) {
+if (endpoint) {
+zwave.multiChannelV3.multiChannelCmdEncap(destinationEndPoint:endpoint).
+encapsulate(cmd).format()
+} else {
+cmd.format()
+}
+}

devicetypes/smartthings/ecobee-sensor.src/ecobee-sensor.groovy

@@ -67,6 +67,6 @@ def refresh() {
 
 void poll() {
 	log.debug "Executing 'poll' using parent SmartApp"
-	parent.poll()
+	parent.pollChild()
 
 }

devicetypes/smartthings/ecobee-thermostat.src/ecobee-thermostat.groovy

@@ -133,7 +133,7 @@ def refresh() {
 
 void poll() {
 	log.debug "Executing 'poll' using parent SmartApp"
-	parent.poll()
+	parent.pollChild()
 }
 
 def generateEvent(Map results) {

devicetypes/smartthings/hue-bridge.src/hue-bridge.groovy

@@ -62,7 +62,7 @@ def parse(description) {
 			log.trace "HUE BRIDGE, GENERATING EVENT: $map.name: $map.value"
 			results << createEvent(name: "${map.name}", value: "${map.value}")
 		} else {
-			log.trace "Parsing description"
+        	log.trace "Parsing description"
 			def msg = parseLanMessage(description)
 			if (msg.body) {
 				def contentType = msg.headers["Content-Type"]
@@ -72,13 +72,13 @@ def parse(description) {
 						log.info "Bridge response: $msg.body"
 					} else {
 						// Sending Bulbs List to parent"
-						if (parent.isInBulbDiscovery())
+                        if (parent.state.inBulbDiscovery)
-							log.info parent.bulbListHandler(device.hub.id, msg.body)
+                        	log.info parent.bulbListHandler(device.hub.id, msg.body)
 					}
 				}
 				else if (contentType?.contains("xml")) {
 					log.debug "HUE BRIDGE ALREADY PRESENT"
-					parent.hubVerification(device.hub.id, msg.body)
+                    parent.hubVerification(device.hub.id, msg.body)
 				}
 			}
 		}

devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy

@@ -233,8 +233,6 @@ private Map getBatteryResult(rawValue) {
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
 				def roundedPct = Math.round(pct * 100)
-				if (roundedPct <= 0)
-					roundedPct = 1
 				result.value = Math.min(100, roundedPct)
 				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
 			}

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -248,8 +248,6 @@ private Map getBatteryResult(rawValue) {
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
 				def roundedPct = Math.round(pct * 100)
-				if (roundedPct <= 0)
-					roundedPct = 1
 				result.value = Math.min(100, roundedPct)
 				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
 			}

devicetypes/smartthings/smartsense-motion-temp-sensor.src/smartsense-motion-temp-sensor.groovy

@@ -206,8 +206,6 @@ private Map getBatteryResult(rawValue) {
 			def maxVolts = 3.0
 			def pct = (volts - minVolts) / (maxVolts - minVolts)
 			def roundedPct = Math.round(pct * 100)
-			if (roundedPct <= 0)
-				roundedPct = 1
 			result.value = Math.min(100, roundedPct)
 			result.descriptionText = "${linkText} battery was ${result.value}%"
 		}

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -313,8 +313,6 @@ private Map getBatteryResult(rawValue) {
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
 				def roundedPct = Math.round(pct * 100)
-				if (roundedPct <= 0)
-					roundedPct = 1
 				result.value = Math.min(100, roundedPct)
 				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
 			}

devicetypes/smartthings/smartsense-open-closed-accelerometer-sensor.src/smartsense-open-closed-accelerometer-sensor.groovy

@@ -206,8 +206,6 @@ def getTemperature(value) {
 			def maxVolts = 3.0
 			def pct = (volts - minVolts) / (maxVolts - minVolts)
 			def roundedPct = Math.round(pct * 100)
-	        if (roundedPct <= 0)
-		        roundedPct = 1
 			result.value = Math.min(100, roundedPct)
 			result.descriptionText = "${linkText} battery was ${result.value}%"
 		}

devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy

@@ -207,8 +207,6 @@ private Map getBatteryResult(rawValue) {
     	def maxVolts = 3.0
 		def pct = (volts - minVolts) / (maxVolts - minVolts)
 		def roundedPct = Math.round(pct * 100)
-	    if (roundedPct <= 0)
-		    roundedPct = 1
 		result.value = Math.min(100, roundedPct)
 		result.descriptionText = "${linkText} battery was ${result.value}%"
 	}

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy

@@ -214,8 +214,6 @@ private Map getBatteryResult(rawValue) {
     	def maxVolts = 3.0
 		def pct = (volts - minVolts) / (maxVolts - minVolts)
 		def roundedPct = Math.round(pct * 100)
-	    if (roundedPct <= 0)
-		    roundedPct = 1
 		result.value = Math.min(100, roundedPct)
 		result.descriptionText = "${linkText} battery was ${result.value}%"
 	}

smartapps/curb/curb-control.src/curb-control.groovy

@@ -65,16 +65,7 @@ void updateSwitch() {
 private void updateAll(devices) {
 	def command = request.JSON?.command
 	if (command) {
-		switch(command) {
+		devices."$command"()
-			case "on":
-				devices.on()
-				break
-			case "off":
-				devices.off()
-				break
-			default:
-				httpError(403, "Access denied. This command is not supported by current capability.")
-		}
 	}
 }
 
@@ -86,16 +77,7 @@ private void update(devices) {
 		if (!device) {
 			httpError(404, "Device not found")
 		} else {
-			switch(command) {
+			device."$command"()
-				case "on":
-					device.on()
-					break
-				case "off":
-					device.off()
-					break
-				default:
-					httpError(403, "Access denied. This command is not supported by current capability.")
-			}
 		}
 	}
 }

smartapps/dianoga/netatmo-connect.src/netatmo-connect.groovy

@@ -58,7 +58,7 @@ def authPage() {
 	if (canInstallLabs()) {
 
 		def redirectUrl = getBuildRedirectUrl()
-		// log.debug "Redirect url = ${redirectUrl}"
+		log.debug "Redirect url = ${redirectUrl}"
 
 		if (state.authToken) {
 			description = "Tap 'Next' to proceed"
@@ -113,13 +113,13 @@ def oauthInitUrl() {
 		scope: "read_station"
 	]
 
-	// log.debug "REDIRECT URL: ${getVendorAuthPath() + toQueryString(oauthParams)}"
+	log.debug "REDIRECT URL: ${getVendorAuthPath() + toQueryString(oauthParams)}"
 
 	redirect (location: getVendorAuthPath() + toQueryString(oauthParams))
 }
 
 def callback() {
-	// log.debug "callback()>> params: $params, params.code ${params.code}"
+	log.debug "callback()>> params: $params, params.code ${params.code}"
 
 	def code = params.code
 	def oauthState = params.state
@@ -135,7 +135,7 @@ def callback() {
 			scope: "read_station"
 		]
 
-		// log.debug "TOKEN URL: ${getVendorTokenPath() + toQueryString(tokenParams)}"
+		log.debug "TOKEN URL: ${getVendorTokenPath() + toQueryString(tokenParams)}"
 
 		def tokenUrl = getVendorTokenPath()
 		def params = [
@@ -144,7 +144,7 @@ def callback() {
 			body: tokenParams
 		]
 
-		// log.debug "PARAMS: ${params}"
+		log.debug "PARAMS: ${params}"
 
 		httpPost(params) { resp ->
 
@@ -156,7 +156,7 @@ def callback() {
 				state.refreshToken = data.refresh_token
 				state.authToken = data.access_token
 				state.tokenExpires = now() + (data.expires_in * 1000)
-				// log.debug "swapped token: $resp.data"
+				log.debug "swapped token: $resp.data"
 			}
 		}
 
@@ -292,7 +292,7 @@ def refreshToken() {
 
 			response.data.each {key, value ->
 				def data = slurper.parseText(key);
-				// log.debug "Data: $data"
+				log.debug "Data: $data"
 
 				state.refreshToken = data.refresh_token
 				state.accessToken = data.access_token

smartapps/resteele/monitor-on-sense.src/monitor-on-sense.groovy

@@ -17,7 +17,7 @@ definition(
     name: "Monitor on Sense",
     namespace: "resteele",
     author: "Rachel Steele",
-    description: "Turn on switch when vibration is sensed",
+    description: "Turn on Monitor when vibration is sensed",
     category: "My Apps",
     iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
     iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
@@ -25,10 +25,10 @@ definition(
 
 
 preferences {
-	section("When vibration is sensed...") {
+	section("When the keyboard is used...") {
 		input "accelerationSensor", "capability.accelerationSensor", title: "Which Sensor?"
 	}
-section("Turn on switch...") {
+section("Turn on/off a light...") {
 		input "switch1", "capability.switch"
 	}
 }
@@ -47,3 +47,5 @@ def updated() {
 def accelerationActiveHandler(evt) {
 		switch1.on()
 	}
+
+

smartapps/smartthings/beacon-control.src/beacon-control.groovy

@@ -114,16 +114,13 @@ def beaconHandler(evt) {
 
 	if (allOk) {
 		def data = new groovy.json.JsonSlurper().parseText(evt.data)
-                // removed logging of device names. can be added back for debugging
+		log.debug "<beacon-control> data: $data - phones: " + phones*.deviceNetworkId
-		//log.debug "<beacon-control> data: $data - phones: " + phones*.deviceNetworkId
 
 		def beaconName = getBeaconName(evt)
-                // removed logging of device names. can be added back for debugging
+		log.debug "<beacon-control> beaconName: $beaconName"
-		//log.debug "<beacon-control> beaconName: $beaconName"
 
 		def phoneName = getPhoneName(data)
-                // removed logging of device names. can be added back for debugging
+		log.debug "<beacon-control> phoneName: $phoneName"
-		//log.debug "<beacon-control> phoneName: $phoneName"
 		if (phoneName != null) {
             def action = data.presence == "1" ? "arrived" : "left"
             def msg = "$phoneName has $action ${action == 'arrived' ? 'at ' : ''}the $beaconName"

smartapps/smartthings/bon-voyage.src/bon-voyage.groovy

@@ -49,15 +49,13 @@ preferences {
 
 def installed() {
 	log.debug "Installed with settings: ${settings}"
-        // commented out log statement because presence sensor label could contain user's name
+	log.debug "Current mode = ${location.mode}, people = ${people.collect{it.label + ': ' + it.currentPresence}}"
-	//log.debug "Current mode = ${location.mode}, people = ${people.collect{it.label + ': ' + it.currentPresence}}"
 	subscribe(people, "presence", presence)
 }
 
 def updated() {
 	log.debug "Updated with settings: ${settings}"
-        // commented out log statement because presence sensor label could contain user's name
+	log.debug "Current mode = ${location.mode}, people = ${people.collect{it.label + ': ' + it.currentPresence}}"
-	//log.debug "Current mode = ${location.mode}, people = ${people.collect{it.label + ': ' + it.currentPresence}}"
 	unsubscribe()
 	subscribe(people, "presence", presence)
 }

smartapps/smartthings/ecobee-connect.src/ecobee-connect.groovy

@@ -20,8 +20,6 @@
  *      JLH - 02-15-2014 - Fuller use of ecobee API
  *      10-28-2015 DVCSMP-604 - accessory sensor, DVCSMP-1174, DVCSMP-1111 - not respond to routines
  */
-include 'asynchttp_v1'
-
 definition(
 		name: "Ecobee (Connect)",
 		namespace: "smartthings",
@@ -246,7 +244,9 @@ def getEcobeeThermostats() {
 		uri: apiEndpoint,
 		path: "/1/thermostat",
 		headers: ["Content-Type": "text/json", "Authorization": "Bearer ${atomicState.authToken}"],
-		query: [json: toJson(bodyParams)]
+        // TODO - the query string below is not consistent with the Ecobee docs:
+        // https://www.ecobee.com/home/developer/api/documentation/v1/operations/get-thermostats.shtml
+		query: [format: 'json', body: toJson(bodyParams)]
 	]
 
 	def stats = [:]
@@ -265,8 +265,9 @@ def getEcobeeThermostats() {
 	} catch (groovyx.net.http.HttpResponseException e) {
         log.trace "Exception polling children: " + e.response.data.status
         if (e.response.data.status.code == 14) {
+            atomicState.action = "getEcobeeThermostats"
             log.debug "Refreshing your auth_token!"
-            refreshAuthToken([async: false, nextAction: "getEcobeeThermostats"])
+            refreshAuthToken()
         }
     }
 	atomicState.thermostats = stats
@@ -357,22 +358,16 @@ def initialize() {
 	atomicState.timeSendPush = null
 	atomicState.reAttempt = 0
 
-	initialPoll() //first time polling data data from thermostat
+	pollHandler() //first time polling data data from thermostat
 
 	//automatically update devices status every 5 mins
 	runEvery5Minutes("poll")
 
 }
 
-/**
+def pollHandler() {
- * Polls the child devices (synchronously).
+	log.debug "pollHandler()"
- * This is used during app install/update, and is synchronous
+	pollChildren(null) // Hit the ecobee API for update on all thermostats
- * to maintain current behavior that will cause install/update to fail
- * if polling fails.
- */
-def initialPoll() {
-	log.debug "initialPoll()"
-	pollChildrenSync() // Hit the ecobee API for update on all thermostats
 
 	atomicState.thermostats.each {stat ->
 		def dni = stat.key
@@ -385,101 +380,10 @@ def initialPoll() {
 	}
 }
 
-/**
+def pollChildren(child = null) {
- * Polls Ecobee (asynchronously) for updated device state data.
+    def thermostatIdsString = getChildDeviceIdsString()
- * Called from within this Connect SmartApp as well as the child
- * devices.
- */
-def poll() {
-    log.debug "polling asynchronously"
-    asynchttp_v1.get('asyncPollResponseHandler', getPollParams())
-}
-
-/**
- * Makes a (synchronous) request to the Ecobee API to get the data for the thermostats.
- * This request is made synchronously here because it is called as part of the
- * install/updated lifecycle, and changing it to asynchronous during the install/update
- * lifecycle may change the behavior if there is an error in polling.
- *
- * If further analysis shows that polling can be done asynchronously during
- * install/update without any adverse consequences, this should then be made
- * asynchronous just as the scheduled polling is.
- */
-def pollChildrenSync() {
     log.debug "polling children: $thermostatIdsString"
 
-    def params = getPollParams()
-    params.query << ["Content-Type": "application/json"]
-
-	def result = false
-    log.debug "making synchronous poll request"
-
-	try{
-		httpGet(params) { resp ->
-			if(resp.status == 200) {
-                atomicState.remoteSensors = resp.data.thermostatList.remoteSensors
-                updateSensorData()
-                storeThermostatData(resp.data.thermostatList)
-                result = true
-                log.debug "updated ${atomicState.thermostats?.size()} stats: ${atomicState.thermostats}"
-            }
-		}
-	} catch (groovyx.net.http.HttpResponseException e) {
-		log.trace "Exception polling children: " + e.response.data.status
-        if (e.response.data.status.code == 14) {
-            log.debug "Refreshing your auth_token!"
-            refreshAuthToken([async: false, nextAction: "pollChildrenSync"])
-        }
-	}
-	return result
-}
-
-/**
- * Response handler for asynchronous request to get thermostat data.
- * Given a successful response, updates the sensor data, stores the thermostat
- * data, and generates child device events.
- *
- * If the access token has expired, will issue a request to refresh the token
- * (and pending successful token refresh, the poll request will be made again).
- */
-def asyncPollResponseHandler(response, data) {
-    log.trace "async poll response handler"
-    if (!response.hasError()) {
-        if (response.status == 200) {
-            def json
-            try {
-                json = response.getJson()
-            } catch (e) {
-                log.error ("error parsing JSON", e)
-            }
-            if (json) {
-                atomicState.remoteSensors = json.thermostatList.remoteSensors
-                updateSensorData()
-                storeThermostatData(json.thermostatList)
-                generateChildThermostatEvent()
-            }
-        } else {
-            log.warn "Response returned non-200 response. Status: ${response.status}, data: ${response.getData()}"
-        }
-    } else {
-        log.trace "Exception polling children: ${response.getErrorMessage()}"
-        def errorJson
-        try {
-            errorJson = response.getErrorJson()
-        } catch (e) {
-            log.error("Unable to parse error json response", e)
-        }
-        if (errorJson?.status?.code == 14) {
-            log.debug "Refreshing your auth_token!"
-            refreshAuthToken([async: true, nextAction: "poll"])
-        } else {
-            log.warn "Error polling children that is not due to an expired token. Response: ${response.getErrorData()}"
-        }
-    }
-}
-
-private getPollParams() {
-    def thermostatIdsString = getChildDeviceIdsString()
     def requestBody = [
         selection: [
             selectionType: "thermostats",
@@ -490,32 +394,66 @@ private getPollParams() {
             includeSensors: true
         ]
     ]
-    return [
+
+	def result = false
+
+	def pollParams = [
         uri: apiEndpoint,
         path: "/1/thermostat",
-        headers: ["Authorization": "Bearer ${atomicState.authToken}"],
+        headers: ["Content-Type": "text/json", "Authorization": "Bearer ${atomicState.authToken}"],
-        query: [json: toJson(requestBody)]
+        // TODO - the query string below is not consistent with the Ecobee docs:
+        // https://www.ecobee.com/home/developer/api/documentation/v1/operations/get-thermostats.shtml
+        query: [format: 'json', body: toJson(requestBody)]
     ]
+
+	try{
+		httpGet(pollParams) { resp ->
+			if(resp.status == 200) {
+                log.debug "poll results returned resp.data ${resp.data}"
+                atomicState.remoteSensors = resp.data.thermostatList.remoteSensors
+                updateSensorData()
+                storeThermostatData(resp.data.thermostatList)
+                result = true
+                log.debug "updated ${atomicState.thermostats?.size()} stats: ${atomicState.thermostats}"
+            }
+		}
+	} catch (groovyx.net.http.HttpResponseException e) {
+		log.trace "Exception polling children: " + e.response.data.status
+        if (e.response.data.status.code == 14) {
+            atomicState.action = "pollChildren"
+            log.debug "Refreshing your auth_token!"
+            refreshAuthToken()
+        }
+	}
+	return result
 }
 
-/**
+// Poll Child is invoked from the Child Device itself as part of the Poll Capability
- * Calls each child thermostat device to generate an event with the thermostat
+def pollChild() {
- * data.
+	def devices = getChildDevices()
- */
+
-def generateChildThermostatEvent() {
+	if (pollChildren()) {
-    log.trace("generateChildThermostatEvent")
+		devices.each { child ->
-    getChildDevices().each { child ->
+			if (!child.device.deviceNetworkId.startsWith("ecobee_sensor")) {
-        if (!child.device.deviceNetworkId.startsWith("ecobee_sensor")){
+				if(atomicState.thermostats[child.device.deviceNetworkId] != null) {
-            if(atomicState.thermostats[child.device.deviceNetworkId] != null) {
+					def tData = atomicState.thermostats[child.device.deviceNetworkId]
-                def tData = atomicState.thermostats[child.device.deviceNetworkId]
+					log.info "pollChild(child)>> data for ${child.device.deviceNetworkId} : ${tData.data}"
-                log.debug "calling child.generateEvent($tData.data)"
+					child.generateEvent(tData.data) //parse received message from parent
-                child.generateEvent(tData.data) //parse received message from parent
+				} else if(atomicState.thermostats[child.device.deviceNetworkId] == null) {
-            } else if(atomicState.thermostats[child.device.deviceNetworkId] == null) {
+					log.error "ERROR: Device connection removed? no data for ${child.device.deviceNetworkId}"
-                log.error "ERROR: Device connection removed? no data for ${child.device.deviceNetworkId}"
+					return null
-                return null
+				}
-            }
+			}
-        }
+		}
-    }
+	} else {
+		log.info "ERROR: pollChildren()"
+		return null
+	}
+
+}
+
+void poll() {
+	pollChild()
 }
 
 def availableModes(child) {
@@ -615,104 +553,47 @@ def toQueryString(Map m) {
 	return m.collect { k, v -> "${k}=${URLEncoder.encode(v.toString())}" }.sort().join("&")
 }
 
-/**
+private refreshAuthToken() {
- * Uses the refresh token to get a new access token, then executes the nextAction.
+	log.debug "refreshing auth token"
- * @param options - a map of options. valid options are async: true/false, which
- *                  specifies if the refresh token request will be done asynchronously or not (default is false)
- *                  nextAction: "nameOfMethod" specifies what method to execute after
- *                  the token is refreshed (not required).
- * (note: using a map as the parameter because we need to call it from a schedueled
- * execution and we can only pass a data map to scheduled executions)
- */
-private void refreshAuthToken(options) {
-    if(!atomicState.refreshToken) {
-		log.warn "Cannot not refresh OAuth token since there is no refreshToken stored"
-    } else {
-        def refreshParams = [
-            uri   : apiEndpoint,
-            path  : "/token",
-            query : [grant_type: 'refresh_token', code: "${atomicState.refreshToken}", client_id: smartThingsClientId],
-        ]
-        if (options.async) {
-            refreshAuthTokenAsync(refreshParams, options.nextAction)
-        } else {
-            refreshAuthTokenSync(refreshParams, options.nextAction)
-        }
-    }
-}
 
-private void refreshAuthTokenSync(params, nextAction = null) {
+	if(!atomicState.refreshToken) {
-    try {
+		log.warn "Can not refresh OAuth token since there is no refreshToken stored"
-        httpPost(refreshParams) { resp ->
+	} else {
-            if(resp.status == 200) {
+		def refreshParams = [
-                log.debug "Token refreshed...calling saved RestAction now!"
+			method: 'POST',
-                debugEvent("Token refreshed ... calling saved RestAction now!")
+			uri   : apiEndpoint,
-                saveTokenAndResumeAction(resp.data, nextAction)
+			path  : "/token",
+			query : [grant_type: 'refresh_token', code: "${atomicState.refreshToken}", client_id: smartThingsClientId],
+		]
+
+		def notificationMessage = "is disconnected from SmartThings, because the access credential changed or was lost. Please go to the Ecobee (Connect) SmartApp and re-enter your account login credentials."
+		//changed to httpPost
+		try {
+			def jsonMap
+			httpPost(refreshParams) { resp ->
+				if(resp.status == 200) {
+					log.debug "Token refreshed...calling saved RestAction now!"
+					debugEvent("Token refreshed ... calling saved RestAction now!")
+					saveTokenAndResumeAction(resp.data)
+			    }
             }
-        }
+		} catch (groovyx.net.http.HttpResponseException e) {
-    } catch (groovyx.net.http.HttpResponseException e) {
+			log.error "refreshAuthToken() >> Error: e.statusCode ${e.statusCode}"
-        log.error "refreshAuthToken() >> Error: e.statusCode ${e.statusCode}"
+			def reAttemptPeriod = 300 // in sec
-        reauthTokenErrorHandler(e.statusCode)
+			if (e.statusCode != 401) { // this issue might comes from exceed 20sec app execution, connectivity issue etc.
-    }
+				runIn(reAttemptPeriod, "refreshAuthToken")
-}
+			} else if (e.statusCode == 401) { // unauthorized
-
+				atomicState.reAttempt = atomicState.reAttempt + 1
-private void refreshAuthTokenAsync(refreshParams, nextAction = null) {
+				log.warn "reAttempt refreshAuthToken to try = ${atomicState.reAttempt}"
-    log.debug "making asynchronous refresh request"
+				if (atomicState.reAttempt <= 3) {
-    asynchttp_v1.post('refreshTokenResponseHandler', refreshParams, [nextAction: nextAction])
+					runIn(reAttemptPeriod, "refreshAuthToken")
-}
+				} else {
-
+					sendPushAndFeeds(notificationMessage)
-/**
+					atomicState.reAttempt = 0
- * The response handler for the request to refresh the authorization handler.
+				}
- * Stores the new authorization token and refresh token, and executes any action
+			}
- * (method) that failed due to the authorization token expiring.
+		}
- */
+	}
-private void refreshTokenResponseHandler(response, data) {
-    if (!response.hasError()) {
-        if (response.status == 200) {
-            def json
-            try {
-            	json = response.getJson()
-            } catch (e) {
-            	log.error "error parsing json from response data: $response.data"
-            }
-            if (json) {
-                log.debug "asnyc refreshTokenHandler: Token refreshed...calling saved RestAction now!"
-                debugEvent("async Token refreshed ... calling saved RestAction now!")
-             	saveTokenAndResumeAction(json, data.nextAction)
-            } else {
-            	log.warn "successfully parsed json but result is empty or null"
-            }
-        } else {
-            log.debug "Non 200 response returned. Response code: ${response.code}, data: ${response.getData()}"
-        }
-    } else {
-        log.debug "async refreshTokenHandler: RESPONSE ERROR: ${response.getErrorJson()}"
-        reauthTokenErrorHandler(response.getErrorJson().code)
-    }
-}
-
-/**
- * Retries refreshing the authorization token. Will attempt to get the refresh
- * token later, in case there were errors retrieving it.
- * Will retry a fixed number of times before sending a push notification to the
- * user instructing them to reauthenticate
- */
-private void reauthTokenErrorHandler(responseCode) {
-    def retryInterval = 300 // in seconds
-    def notificationMessage = "is disconnected from SmartThings, because the access credential changed or was lost. Please go to the Ecobee (Connect) SmartApp and re-enter your account login credentials."
-    // might get non-401 error from exceeding 20 second app limit, connectivity issues, etc.
-    if (responseCode != 401) {
-        runIn(retryInterval, "refreshAuthToken", [async: true])
-    } else if (responseCode == 401) { // unauthorized
-        atomicState.reAttempt = atomicState.reAttempt + 1
-        log.warn "reAttempt refreshAuthToken to try = ${atomicState.reAttempt}"
-        if (atomicState.reAttempt <= 3) {
-            runIn(retryInterval, "refreshAuthToken", [async: true])
-        } else {
-            sendPushAndFeeds(notificationMessage)
-            atomicState.reAttempt = 0
-        }
-    }
 }
 
 /**
@@ -722,20 +603,20 @@ private void reauthTokenErrorHandler(responseCode) {
  *
  * @param json - an object representing the parsed JSON response from Ecobee
  */
-private void saveTokenAndResumeAction(json, String nextAction) {
+private void saveTokenAndResumeAction(json) {
-    def debugMessage = "token response, scope: ${json?.scope}, expires_in: ${json?.expires_in}, token_type: ${json?.token_type}"
+    log.debug "token response json: $json"
-    log.debug "debugMessage"
     if (json) {
-        debugEvent(debugMessage)
+        debugEvent("Response = $json")
         atomicState.refreshToken = json?.refresh_token
         atomicState.authToken = json?.access_token
-        if (nextAction) {
+        if (atomicState.action) {
-            log.debug "got refresh token, will execute next action (passed in!): $nextAction"
+            log.debug "got refresh token, executing next action: ${atomicState.action}"
-            "$nextAction"()
+            "${atomicState.action}"()
         }
     } else {
         log.warn "did not get response body from refresh token response"
     }
+    atomicState.action = ""
 }
 
 /**
@@ -875,6 +756,7 @@ private boolean sendCommandToEcobee(Map bodyParams) {
 	try{
         httpPost(cmdParams) { resp ->
             if(resp.status == 200) {
+                log.debug "updated ${resp.data}"
                 def returnStatus = resp.data.status.code
                 if (returnStatus == 0) {
                     log.debug "Successful call to ecobee API."
@@ -889,10 +771,11 @@ private boolean sendCommandToEcobee(Map bodyParams) {
         log.trace "Exception Sending Json: " + e.response.data.status
         debugEvent ("sent Json & got http status ${e.statusCode} - ${e.response.data.status.code}")
         if (e.response.data.status.code == 14) {
-            // TODO - figure out why we're setting the next action to be poll
+            // TODO - figure out why we're setting the next action to be pollChildren
             // after refreshing auth token. Is it to keep UI in sync, or just copy/paste error?
+            atomicState.action = "pollChildren"
             log.debug "Refreshing your auth_token!"
-            refreshAuthToken([async: true, nextAction: "poll"])
+            refreshAuthToken()
         } else {
             debugEvent("Authentication error, invalid authentication method, lack of credentials, etc.")
             log.error "Authentication error, invalid authentication method, lack of credentials, etc."

smartapps/smartthings/energy-alerts.src/energy-alerts.groovy

@@ -64,12 +64,10 @@ def meterHandler(evt) {
     def lastValue = atomicState.lastValue as double
     atomicState.lastValue = meterValue
 
-    def dUnit ? evt.unit : "Watts"
-
     def aboveThresholdValue = aboveThreshold as int
     if (meterValue > aboveThresholdValue) {
     	if (lastValue < aboveThresholdValue) { // only send notifications when crossing the threshold
-		    def msg = "${meter} reported ${evt.value} ${dUnit} which is above your threshold of ${aboveThreshold}."
+		    def msg = "${meter} reported ${evt.value} ${evt.unit} which is above your threshold of ${aboveThreshold}."
     	    sendMessage(msg)
         } else {
 //        	log.debug "not sending notification for ${evt.description} because the threshold (${aboveThreshold}) has already been crossed"
@@ -80,7 +78,7 @@ def meterHandler(evt) {
     def belowThresholdValue = belowThreshold as int
     if (meterValue < belowThresholdValue) {
     	if (lastValue > belowThresholdValue) { // only send notifications when crossing the threshold
-		    def msg = "${meter} reported ${evt.value} ${dUnit} which is below your threshold of ${belowThreshold}."
+		    def msg = "${meter} reported ${evt.value} ${evt.unit} which is below your threshold of ${belowThreshold}."
     	    sendMessage(msg)
         } else {
 //        	log.debug "not sending notification for ${evt.description} because the threshold (${belowThreshold}) has already been crossed"

smartapps/smartthings/flood-alert.src/flood-alert.groovy

@@ -54,10 +54,10 @@ def waterWetHandler(evt) {
 	def alreadySentSms = recentEvents.count { it.value && it.value == "wet" } > 1
 
 	if (alreadySentSms) {
-		log.debug "SMS already sent within the last $deltaSeconds seconds"
+		log.debug "SMS already sent to $phone within the last $deltaSeconds seconds"
 	} else {
 		def msg = "${alarm.displayName} is wet!"
-		log.debug "$alarm is wet, texting phone number"
+		log.debug "$alarm is wet, texting $phone"
 
 		if (location.contactBookEnabled) {
 			sendNotificationToContacts(msg, recipients)

smartapps/smartthings/garage-door-monitor.src/garage-door-monitor.groovy

@@ -90,7 +90,7 @@ def takeAction(){
 }
 
 def sendTextMessage() {
-	log.debug "$multisensor was open too long, texting phone"
+	log.debug "$multisensor was open too long, texting $phone"
 
 	updateSmsHistory()
 	def openMinutes = maxOpenTime * (state.smsHistory?.size() ?: 1)

smartapps/smartthings/gentle-wake-up.src/gentle-wake-up.groovy

@@ -761,7 +761,7 @@ String displayableTime(timeRemaining) {
 		return "${minutes}:00"
 	}
 	def fraction = "0.${parts[1]}" as double
-	def seconds = "${60 * fraction as int}".padLeft(2, "0")
+	def seconds = "${60 * fraction as int}".padRight(2, "0")
 	return "${minutes}:${seconds}"
 }
 
@@ -1101,4 +1101,4 @@ def hasStartLevel() {
 
 def hasEndLevel() {
 	return (endLevel != null && endLevel != "")
-}
+}

smartapps/smartthings/greetings-earthling.src/greetings-earthling.groovy

@@ -47,13 +47,13 @@ preferences {
 
 def installed() {
 	log.debug "Installed with settings: ${settings}"
-	// log.debug "Current mode = ${location.mode}, people = ${people.collect{it.label + ': ' + it.currentPresence}}"
+	log.debug "Current mode = ${location.mode}, people = ${people.collect{it.label + ': ' + it.currentPresence}}"
 	subscribe(people, "presence", presence)
 }
 
 def updated() {
 	log.debug "Updated with settings: ${settings}"
-	// log.debug "Current mode = ${location.mode}, people = ${people.collect{it.label + ': ' + it.currentPresence}}"
+	log.debug "Current mode = ${location.mode}, people = ${people.collect{it.label + ': ' + it.currentPresence}}"
 	unsubscribe()
 	subscribe(people, "presence", presence)
 }
@@ -71,10 +71,11 @@ def presence(evt)
 			def person = getPerson(evt)
 			def recentNotPresent = person.statesSince("presence", t0).find{it.value == "not present"}
 			if (recentNotPresent) {
-				log.debug "skipping notification of arrival of Person because last departure was only ${now() - recentNotPresent.date.time} msec ago"
+				log.debug "skipping notification of arrival of ${person.displayName} because last departure was only ${now() - recentNotPresent.date.time} msec ago"
 			}
 			else {
 				def message = "${person.displayName} arrived at home, changing mode to '${newMode}'"
+				log.info message
 				send(message)
 				setLocationMode(newMode)
 			}
@@ -105,4 +106,6 @@ private send(msg) {
             sendSms(phone, msg)
         }
     }
+
+	log.debug msg
 }

smartapps/smartthings/habit-helper.src/habit-helper.groovy

@@ -57,11 +57,12 @@ def scheduleCheck()
 	def message = message1 ?: "SmartThings - Habit Helper Reminder!"
 
     if (location.contactBookEnabled) {
-        log.debug "Texting reminder to contacts:${recipients?.size()}"
+        log.debug "Texting reminder: ($message) to contacts:${recipients?.size()}"
         sendNotificationToContacts(message, recipients)
     }
     else {
-        log.debug "Texting reminder"
+
+        log.debug "Texting reminder: ($message) to $phone1"
         sendSms(phone1, message)
     }
 }

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -757,10 +757,6 @@ def isValidSource(macAddress) {
 	return (vbridges?.find {"${it.value.mac}" == macAddress}) != null
 }
 
-def isInBulbDiscovery() {
-	return state.inBulbDiscovery
-}
-
 /////////////////////////////////////
 //CHILD DEVICE METHODS
 /////////////////////////////////////

smartapps/smartthings/it-moved.src/it-moved.groovy

@@ -53,14 +53,14 @@ def accelerationActiveHandler(evt) {
 	def alreadySentSms = recentEvents.count { it.value && it.value == "active" } > 1
 
 	if (alreadySentSms) {
-		log.debug "SMS already sent within the last $deltaSeconds seconds"
+		log.debug "SMS already sent to $phone1 within the last $deltaSeconds seconds"
 	} else {
         if (location.contactBookEnabled) {
-            log.debug "accelerationSensor has moved, texting contacts: ${recipients?.size()}"
+            log.debug "$accelerationSensor has moved, texting contacts: ${recipients?.size()}"
             sendNotificationToContacts("${accelerationSensor.label ?: accelerationSensor.name} moved", recipients)
         }
         else {
-            log.debug "accelerationSensor has moved, sending text message"
+            log.debug "$accelerationSensor has moved, texting $phone1"
             sendSms(phone1, "${accelerationSensor.label ?: accelerationSensor.name} moved")
         }
 	}

smartapps/smartthings/its-too-hot.src/its-too-hot.groovy

@@ -69,10 +69,10 @@ def temperatureHandler(evt) {
 		def alreadySentSms = recentEvents.count { it.doubleValue >= tooHot } > 1
 
 		if (alreadySentSms) {
-			log.debug "SMS already sent within the last $deltaMinutes minutes"
+			log.debug "SMS already sent to $phone1 within the last $deltaMinutes minutes"
 			// TODO: Send "Temperature back to normal" SMS, turn switch off
 		} else {
-			log.debug "Temperature rose above $tooHot:  sending SMS and activating $mySwitch"
+			log.debug "Temperature rose above $tooHot:  sending SMS to $phone1 and activating $mySwitch"
 			def tempScale = location.temperatureScale ?: "F"
 			send("${temperatureSensor1.displayName} is too hot, reporting a temperature of ${evt.value}${evt.unit?:tempScale}")
 			switch1?.on()

smartapps/smartthings/lifx-connect.src/lifx-connect.groovy

@@ -50,9 +50,9 @@ def authPage() {
 		}
 		def description = "Tap to enter LIFX credentials"
 		def redirectUrl = "${serverUrl}/oauth/initialize?appId=${app.id}&access_token=${state.accessToken}&apiServerUrl=${apiServerUrl}" // this triggers oauthInit() below
-		// def redirectUrl = "${apiServerUrl}"
+//        def redirectUrl = "${apiServerUrl}"
-		// log.debug "app id: ${app.id}"
+        log.debug "app id: ${app.id}"
-		// log.debug "redirect url: ${redirectUrl}"s
+		log.debug "redirect url: ${redirectUrl}"
 		return dynamicPage(name: "Credentials", title: "Connect to LIFX", nextPage: null, uninstall: true, install:true) {
 			section {
 				href(url:redirectUrl, required:true, title:"Connect to LIFX", description:"Tap here to connect your LIFX account")
@@ -372,7 +372,7 @@ def updateDevices() {
 		def childDevice = getChildDevice(device.id)
 		selectors.add("${device.id}")
 		if (!childDevice) {
-			// log.info("Adding device ${device.id}: ${device.product}")
+			log.info("Adding device ${device.id}: ${device.product}")
 			def data = [
 					label: device.label,
 					level: Math.round((device.brightness ?: 1) * 100),

smartapps/smartthings/notify-me-when.src/notify-me-when.groovy

@@ -111,23 +111,16 @@ private sendMessage(evt) {
 	if (location.contactBookEnabled) {
 		sendNotificationToContacts(msg, recipients, options)
 	} else {
+		if (pushAndPhone != 'No') {
+			log.debug 'sending push'
+			options.method = 'push'
+			sendNotification(msg, options)
+		}
 		if (phone) {
 			options.phone = phone
-			if (pushAndPhone != 'No') {
+			log.debug 'sending SMS'
-				log.debug 'Sending push and SMS'
+			sendNotification(msg, options)
-				options.method = 'both'
-			} else {
-				log.debug 'Sending SMS'
-				options.method = 'phone'
-			}
-		} else if (pushAndPhone != 'No') {
-			log.debug 'Sending push'
-			options.method = 'push'
-		} else {
-			log.debug 'Sending nothing'
-			options.method = 'none'
 		}
-		sendNotification(msg, options)
 	}
 	if (frequency) {
 		state[evt.deviceId] = now()

smartapps/smartthings/presence-change-push.src/presence-change-push.groovy

@@ -41,10 +41,10 @@ def updated() {
 
 def presenceHandler(evt) {
 	if (evt.value == "present") {
-		// log.debug "${presence.label ?: presence.name} has arrived at the ${location}"
+		log.debug "${presence.label ?: presence.name} has arrived at the ${location}"
     	sendPush("${presence.label ?: presence.name} has arrived at the ${location}")
 	} else if (evt.value == "not present") {
-		// log.debug "${presence.label ?: presence.name} has left the ${location}"
+		log.debug "${presence.label ?: presence.name} has left the ${location}"
     	sendPush("${presence.label ?: presence.name} has left the ${location}")
 	}
 }

smartapps/smartthings/presence-change-text.src/presence-change-text.groovy

@@ -47,7 +47,7 @@ def updated() {
 
 def presenceHandler(evt) {
 	if (evt.value == "present") {
-		// log.debug "${presence.label ?: presence.name} has arrived at the ${location}"
+		log.debug "${presence.label ?: presence.name} has arrived at the ${location}"
 
         if (location.contactBookEnabled) {
             sendNotificationToContacts("${presence.label ?: presence.name} has arrived at the ${location}", recipients)
@@ -56,7 +56,7 @@ def presenceHandler(evt) {
             sendSms(phone1, "${presence.label ?: presence.name} has arrived at the ${location}")
         }
 	} else if (evt.value == "not present") {
-		// log.debug "${presence.label ?: presence.name} has left the ${location}"
+		log.debug "${presence.label ?: presence.name} has left the ${location}"
 
         if (location.contactBookEnabled) {
             sendNotificationToContacts("${presence.label ?: presence.name} has left the ${location}", recipients)

smartapps/smartthings/ridiculously-automated-garage-door.src/ridiculously-automated-garage-door.groovy

@@ -67,7 +67,7 @@ def updated() {
 }
 
 def subscribe() {
-	// log.debug "present: ${cars.collect{it.displayName + ': ' + it.currentPresence}}"
+	log.debug "present: ${cars.collect{it.displayName + ': ' + it.currentPresence}}"
 	subscribe(doorSensor, "contact", garageDoorContact)
 
 	subscribe(cars, "presence", carPresence)

smartapps/smartthings/smart-security.src/smart-security.groovy

@@ -71,7 +71,7 @@ def updated() {
 private subscribeToEvents()
 {
 	subscribe intrusionMotions, "motion", intruderMotion
-	// subscribe residentMotions, "motion", residentMotion
+	subscribe residentMotions, "motion", residentMotion
 	subscribe intrusionContacts, "contact", contact
 	subscribe alarms, "alarm", alarm
 	subscribe(app, appTouch)
@@ -156,7 +156,6 @@ def residentMotion(evt)
 	//    	startReArmSequence()
 	//    }
 	//}
-  unsubscribe(residentMotions)
 }
 
 def contact(evt)
@@ -215,7 +214,7 @@ def checkForReArm()
 	}
 	else {
 		log.warn "checkForReArm: lastIntruderMotion was null, unable to check for re-arming intrusion detection"
-	}
+	}	
 }
 
 private startAlarmSequence()

smartapps/smartthings/text-me-when-it-opens.src/text-me-when-it-opens.groovy

@@ -48,7 +48,7 @@ def updated()
 
 def contactOpenHandler(evt) {
 	log.trace "$evt.value: $evt, $settings"
-  log.debug "$contact1 was opened, sending text"
+	log.debug "$contact1 was opened, texting $phone1"
     if (location.contactBookEnabled) {
         sendNotificationToContacts("Your ${contact1.label ?: contact1.name} was opened", recipients)
     }

smartapps/smartthings/text-me-when-theres-motion-and-im-not-here.src/text-me-when-theres-motion-and-im-not-here.groovy

@@ -50,7 +50,7 @@ def updated() {
 
 def motionActiveHandler(evt) {
 	log.trace "$evt.value: $evt, $settings"
-
+	
 	if (presence1.latestValue("presence") == "not present") {
 		// Don't send a continuous stream of text messages
 		def deltaSeconds = 10
@@ -60,14 +60,14 @@ def motionActiveHandler(evt) {
 		def alreadySentSms = recentEvents.count { it.value && it.value == "active" } > 1
 
 		if (alreadySentSms) {
-			log.debug "SMS already sent within the last $deltaSeconds seconds"
+			log.debug "SMS already sent to $phone1 within the last $deltaSeconds seconds"
 		} else {
             if (location.contactBookEnabled) {
                 log.debug "$motion1 has moved while you were out, sending notifications to: ${recipients?.size()}"
                 sendNotificationToContacts("${motion1.label} ${motion1.name} moved while you were out", recipients)
             }
             else {
-                log.debug "$motion1 has moved while you were out, sending text"
+                log.debug "$motion1 has moved while you were out, texting $phone1"
                 sendSms(phone1, "${motion1.label} ${motion1.name} moved while you were out")
             }
 		}

smartapps/smartthings/the-gun-case-moved.src/the-gun-case-moved.groovy

@@ -53,13 +53,13 @@ def accelerationActiveHandler(evt) {
 	def alreadySentSms = recentEvents.count { it.value && it.value == "active" } > 1
 
 	if (alreadySentSms) {
-		log.debug "SMS already sent to phone within the last $deltaSeconds seconds"
+		log.debug "SMS already sent to $phone1 within the last $deltaSeconds seconds"
 	} else {
         if (location.contactBookEnabled) {
             sendNotificationToContacts("Gun case has moved!", recipients)
         }
         else {
-            log.debug "$accelerationSensor has moved, texting phone"
+            log.debug "$accelerationSensor has moved, texting $phone1"
             sendSms(phone1, "Gun case has moved!")
         }
 	}

smartapps/smartthings/withings.src/withings.groovy

@@ -60,7 +60,7 @@ def authPage() {
 
 def oauthInitUrl() {
 	def token = getToken()
-	//log.debug "initiateOauth got token: $token"
+	log.debug "initiateOauth got token: $token"
 
 	// store these for validate after the user takes the oauth journey
 	state.oauth_request_token = token.oauth_token
@@ -76,7 +76,7 @@ def getToken() {
 	]
 	def requestTokenBaseUrl = "https://oauth.withings.com/account/request_token"
 	def url = buildSignedUrl(requestTokenBaseUrl, params)
-	//log.debug "getToken - url: $url"
+	log.debug "getToken - url: $url"
 
 	return getJsonFromUrl(url)
 }
@@ -182,7 +182,7 @@ def exchangeToken() {
 
 	def requestTokenBaseUrl = "https://oauth.withings.com/account/access_token"
 	def url = buildSignedUrl(requestTokenBaseUrl, params, tokenSecret)
-	//log.debug "signed url: $url with secret $tokenSecret"
+	log.debug "signed url: $url with secret $tokenSecret"
 
 	def token = getJsonFromUrl(url)
 
@@ -198,8 +198,8 @@ def exchangeToken() {
 
 def load() {
 	def json = get(getMeasurement(new Date() - 30))
-	// removed logging of actual json payload.  Can be put back for debugging
+
-	log.debug "swapped, then received json"
+	log.debug "swapped, then received: $json"
 	parse(data:json)
 
 	def html = """