MSA-1676: Expanded Im home, good bye routines to be used with SwitchLevel products

[CHF-477] Health Check for Z-Wave Dimmer Switch Generic

devicetypes/blebson/iris-smart-plug.src/iris-smart-plug.groovy

@@ -1,241 +0,0 @@
-/**
- *  Copyright 2015 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- *	SmartPower Outlet (CentraLite)
- *
- *	Author: SmartThings
- *	Date: 2015-08-23
- */
-metadata {
-	// Automatically generated. Make future change here.
-	definition (name: "Iris Smart Plug", namespace: "blebson", author: "SmartThings") {
-		capability "Actuator"
-		capability "Switch"
-		capability "Power Meter"
-		capability "Energy Meter"
-		capability "Configuration"
-		capability "Refresh"
-		capability "Sensor"
-
-		// indicates that device keeps track of heartbeat (in state.heartbeat)
-		attribute "heartbeat", "string"     
-		attribute "timerStart", "number"
-
-		attribute "energyDisplay", "string"
-		attribute "elapsedTimeDisplay", "string"
-
-		command "resetEnergyUsage"
-
-		fingerprint profileId: "0104", inClusters: "0000 0003 0004 0005 0006 0B04 0B05 FC03", outClusters: "0019", manufacturer: "CentraLite",  model: "3210-L", deviceJoinName: "Outlet"
-		//fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3200", deviceJoinName: "Outlet"
-		//fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3200-Sgb", deviceJoinName: "Outlet"
-		//fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "4257050-RZHAC", deviceJoinName: "Outlet"
-		//fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0B04,0B05", outClusters: "0019"
-	}
-
-	// simulator metadata
-	simulator {
-		// status messages
-		status "on": "on/off: 1"
-		status "off": "on/off: 0"
-
-		// reply messages
-		reply "zcl on-off on": "on/off: 1"
-		reply "zcl on-off off": "on/off: 0"
-	}
-
-	preferences {
-		section {
-			image(name: 'educationalcontent', multiple: true, images: [
-				"http://cdn.device-gse.smartthings.com/Outlet/US/OutletUS1.jpg",
-				"http://cdn.device-gse.smartthings.com/Outlet/US/OutletUS2.jpg"
-				])
-		}
-        
-        section("Reporting Intervals") {
-        	input "intervalMin", "number", title: "Minimum interval between reports [s]", defaultValue: 5, range: "1..600"
-        	input "intervalMax", "number", title: "Maximum interval between reports [s]", defaultValue: 600, range: "1..600"
-        }
-	}
-
-	// UI tile definitions
-	tiles(scale: 2) {
-		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
-			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821", nextState: "turningOff"
-				attributeState "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState: "turningOn"
-				attributeState "turningOn", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821", nextState: "turningOff"
-				attributeState "turningOff", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState: "turningOn"
-			}
-			tileAttribute ("power", key: "SECONDARY_CONTROL") {
-				attributeState "power", label:'${currentValue} W'
-			}
-		}
-        
-		valueTile("energyDisplay", "device.energyDisplay", width: 5, height: 1, decoration: "flat") {
-			state "default", label:'Energy used: ${currentValue}', unit: "kWh"
-        	}
-        	
-		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 1, height: 1) {
-			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-		}
-        
-		standardTile("resetUsage", "command.resetEnergyUsage", decoration: "flat", width: 1, height: 1){
-			state "default", action: "resetEnergyUsage", label:'Reset kWh', icon:"st.Health & Wellness.health7"
-		}        
-        
-		valueTile("elapsedTimeDisplay", "device.elapsedTimeDisplay", decoration: "flat", width: 5, height: 1){
-			state "default", label: 'Time: ${currentValue}', unit: "h"
-		}      
-
-		standardTile("configure", "device.switch", inactiveLabel: false, decoration: "flat", width: 1, height: 1) {
-			state "default", label:"", action:"configure", icon:"st.secondary.configure"
-		}
-
-		main "switch"
-		details(["switch","energyDisplay","resetUsage","power","elapsedTimeDisplay","refresh"])
-	}
-}
-
-// Parse incoming device messages to generate events
-def parse(String description) {
-	log.debug "description is $description"
-
-	// save heartbeat (i.e. last time we got a message from device)
-	state.heartbeat = Calendar.getInstance().getTimeInMillis()
-	if (state.timerStart == null)
-	{
-		state.timerStart = Calendar.getInstance().getTimeInMillis()
-		state.energy = 0.0
-	}
-
-	def finalResult = zigbee.getKnownDescription(description)
-
-	//TODO: Remove this after getKnownDescription can parse it automatically
-	if (!finalResult && description!="updated")
-		finalResult = getPowerDescription(zigbee.parseDescriptionAsMap(description))
-
-	if (finalResult) {
-		log.info finalResult
-		if (finalResult.type == "update") {
-			log.info "$device updates: ${finalResult.value}"
-		}
-		else if (finalResult.type == "power") {
-			def powerValue = (finalResult.value as Integer)/10           
-			sendEvent(name: "power", value: powerValue, isStateChange: true, displayed: false) // note: stateChange = true added so the energy calculation can work properly
-			/*
-				Dividing by 10 as the Divisor is 10000 and unit is kW for the device. AttrId: 0302 and 0300. Simplifying to 10
-				power level is an integer. The exact power level with correct units needs to be handled in the device type
-				to account for the different Divisor value (AttrId: 0302) and POWER Unit (AttrId: 0300). CLUSTER for simple metering is 0702
-			*/           
-			calculateAndShowEnergy()
-		}
-		else {
-			sendEvent(name: finalResult.type, value: finalResult.value)
-		}
-	}
-	else {
-		log.warn "DID NOT PARSE MESSAGE for description : $description"
-		log.debug zigbee.parseDescriptionAsMap(description)
-	}
-}
-
-def calculateAndShowEnergy()
-{
-    def recentEvents = device.statesSince("power", new Date()-1, [max: 2]).collect {[value: it.value as float, date: it.date]}        	
-    def deltaT = (recentEvents[0].date.getTime() - recentEvents[1].date.getTime()) // time since last "power" event in milliseconds
-    deltaT = deltaT / 3600000 // convert to hours
-    
-    def energyValue = device.currentValue("energy") 
-    if(energyValue != null) {
-    	energyValue += (recentEvents[1].value * deltaT) / 1000 // energy used since last "power" event in kWh 
-    }
-    
-    sendEvent(name: "energy", value: energyValue, displayed: false)
-    sendEvent(name: "energyDisplay", value: String.format("%6.3f kWh",energyValue), displayed: false)
-
-    def currentTime = Calendar.getInstance().getTimeInMillis()   
-    def timeDifference = ((long)currentTime - state.timerStart)/1000; // in seconds
-    int h = (int) (timeDifference / (3600));
-    int m = (int) ((timeDifference - (h * 3600)) / 60);
-    int s = (int) (timeDifference - (h * 3600) - m * 60);
-    int d = (int) h >= 24 ? h / 24 : 0
-    h = d > 0 ? h % 24 : h
-
-    sendEvent(name: "elapsedTimeDisplay", value: String.format("%dd %02d:%02d:%02d", d, h, m, s), displayed: false)
-}
-
-def off() {
-	zigbee.off()
-}
-
-def on() {
-	zigbee.on()
-}
-
-def resetEnergyUsage() {
-	sendEvent(name: "energy", value: 0.0, displayed: false)
-	state.timerStart = Calendar.getInstance().getTimeInMillis()
-	sendEvent(name: "energyDisplay", value: String.format("%6.3f kWh",0.0), displayed: false)
-	sendEvent(name: "elapsedTimeDisplay", value: String.format("%dd %02d:%02d:%02d", 0, 0, 0, 0), displayed: false)
-}
-
-def refresh() {
-	sendEvent(name: "heartbeat", value: "alive", displayed:false)
-	return zigbee.onOffRefresh() + zigbee.refreshData("0x0B04", "0x050B")
-}
-
-def configure() {
-	log.debug "Configuring..."
-	return zigbee.onOffConfig() + powerConfig() + refresh()
-}
-
-def updated() {
-	response(configure())
-}
-
-//power config for devices with min reporting interval as 1 seconds and reporting interval if no activity as 10min (600s)
-//min change in value is 01
-def powerConfig() {
-	[
-		"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 0x0B04 {${device.zigbeeId}} {}", "delay 200",
-		"zcl global send-me-a-report 0x0B04 0x050B 0x29 ${intervalMin ?: 5} ${intervalMax ?: 600} {05 00}",				//The send-me-a-report is custom to the attribute type for CentraLite
-		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
-	]
-}
-
-private getEndpointId() {
-	new BigInteger(device.endpointId, 16).toString()
-}
-
-//TODO: Remove this after getKnownDescription can parse it automatically
-def getPowerDescription(descMap) {
-	def powerValue = "undefined"
-	if (descMap.cluster == "0B04") {
-		if (descMap.attrId == "050b") {
-			if(descMap.value!="ffff")
-				powerValue = zigbee.convertHexToInt(descMap.value)
-		}
-	}
-	else if (descMap.clusterId == "0B04") {
-		if(descMap.command=="07"){
-			return	[type: "update", value : "power (0B04) capability configured successfully"]
-		}
-	}
-
-	if (powerValue != "undefined"){
-		return	[type: "power", value : powerValue]
-	}
-	else {
-		return [:]
-	}
-}

devicetypes/smartthings/life360-user.src/life360-user.groovy

@@ -39,7 +39,7 @@ metadata {
 }
 
 def generatePresenceEvent(boolean present) {
-	log.debug "Here in generatePresenceEvent!"
+	log.info "Life360 generatePresenceEvent($present)"
 	def value = formatValue(present)
 	def linkText = getLinkText(device)
 	def descriptionText = formatDescriptionText(linkText, present)

devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy

@@ -128,7 +128,7 @@ private Map parseCatchAllMessage(String description) {
 				if (cluster.command == 0x07) {
 					if (cluster.data[0] == 0x00){
 						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
-						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+						resultMap = [name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID]]
 					}
 					else {
 						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -132,7 +132,7 @@ private Map parseCatchAllMessage(String description) {
 				if (cluster.command == 0x07) {
 					if (cluster.data[0] == 0x00) {
 						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
-						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+						resultMap = [name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID]]
 					}
 					else {
 						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -161,7 +161,7 @@ private Map parseCatchAllMessage(String description) {
 				if (cluster.command == 0x07) {
 					if(cluster.data[0] == 0x00) {
 						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
-						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+						resultMap = [name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID]]
 					}
 					else {
 						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"
@@ -339,7 +339,7 @@ private Map getContactResult(value) {
 	log.debug "Contact: ${device.displayName} value = ${value}"
 	def descriptionText = value == 'open' ? '{{ device.displayName }} was opened' : '{{ device.displayName }} was closed'
 	sendEvent(name: 'contact', value: value, descriptionText: descriptionText, displayed: false, translatable: true)
-	sendEvent(name: 'status', value: value, descriptionText: descriptionText, translatable: true)
+	return [name: 'status', value: value, descriptionText: descriptionText, translatable: true]
 }
 
 private getAccelerationResult(numValue) {

devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy

@@ -119,7 +119,7 @@ private Map parseCatchAllMessage(String description) {
 				if (cluster.command == 0x07){
 					if (cluster.data[0] == 0x00) {
 						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
-						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+						resultMap = [name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID]]
 					}
 					else {
 						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy

@@ -103,7 +103,7 @@ private Map parseCatchAllMessage(String description) {
 				if (cluster.command == 0x07) {
 					if (cluster.data[0] == 0x00){
 						log.debug "TEMP REPORTING CONFIG RESPONSE" + cluster
-						sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+						resultMap = [name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID]]
 					}
 					else {
 						log.warn "TEMP REPORTING CONFIG FAILED- error code:${cluster.data[0]}"

devicetypes/smartthings/zll-dimmer-bulb.src/zll-dimmer-bulb.groovy

@@ -127,8 +127,8 @@ def configureHealthCheck() {
 
 def configure() {
     log.debug "configure()"
-    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
     configureHealthCheck()
+    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
 }
 
 def updated() {

devicetypes/smartthings/zwave-dimmer-switch-generic.src/zwave-dimmer-switch-generic.groovy

@@ -24,6 +24,10 @@ metadata {
 		fingerprint inClusters: "0x26", deviceJoinName: "Z-Wave Dimmer"
 		fingerprint mfr:"001D", prod:"1902", deviceJoinName: "Z-Wave Dimmer"
 		fingerprint mfr:"001D", prod:"1B03", model:"0334", deviceJoinName: "Leviton Universal Dimmer"
+		fingerprint mfr:"011A", prod:"0102", model:"0201", deviceJoinName: "Enerwave In-Wall Dimmer"
+		fingerprint mfr:"001D", prod:"1001", model:"0334", deviceJoinName: "Leviton 3-Speed Fan Controller"
+		fingerprint mfr:"001D", prod:"0602", model:"0334", deviceJoinName: "Leviton Magnetic Low Voltage Dimmer"
+		fingerprint mfr:"001D", prod:"0401", model:"0334", deviceJoinName: "Leviton 600W Incandescent Dimmer"
 	}
 
 	simulator {

smartapps/herna202/smart-im-home.src/smart-im-home.groovy

@@ -0,0 +1,212 @@
+/**
+ *  Smart Im Home
+ *
+ *  Copyright 2016 Fernando Hernandez
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+definition(
+    name: "Smart Im Home",
+    namespace: "Herna202",
+    author: "Fernando Hernandez",
+    description: "Only turn on the light after sunset when you are the first to come home",
+    category: "Convenience",
+    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
+    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png") {
+}
+
+
+preferences 
+{
+	section("When I arrive and leave...")
+    {
+		input "presence1", "capability.presenceSensor", title: "Who?",required: true, multiple: true
+	}
+	section("Turn on/off a light...")
+    {
+		input "switch1", "capability.switchLevel",required: true, multiple: true
+	}
+    section("Light Level") 
+    {
+    	input "LightLevel", "number", required: true, title: "How Bright?"
+    }
+    section("Change to this mode when you leave (defaults to Away)") 
+    {
+        input "leaveMode", "mode", required: false ,title: "Mode?"
+    }
+    section("Change to this mode when you return (defaults to Home)") 
+    {
+        input "returnMode", "mode", required: false, title: "Mode?"
+    }
+    section("False alarm threshold (defaults to 2 min)") 
+    {
+        input "falseAlarmThreshold", "decimal", title: "Number of minutes", required: false
+    }
+    section( "Notifications" ) 
+    {
+        input("recipients", "contact", title: "Send notifications to", required: false) 
+        {
+            input "sendPushMessage", "enum", title: "Send a push notification?", options: ["Yes", "No"], required: false
+            input "phone", "phone", title: "Send a Text Message?", required: false
+        }
+    }
+}
+
+def installed()
+{
+    state.howManyPeopleAreHome = isAnyoneHome()
+	subscribe(presence1, "presence", presenceHandler)
+}
+
+def updated()
+{
+	unsubscribe()
+	subscribe(presence1, "presence", presenceHandler)
+}
+
+private findFalseAlarmThreshold() 
+{
+    (falseAlarmThreshold != null && falseAlarmThreshold != "") ? falseAlarmThreshold : 2
+}
+
+private findReturnMode() 
+{
+    (returnMode != null && returnMode != "") ? returnMode : "Home"
+}
+
+private findLeaveMode() 
+{
+    (leaveMode != null && leaveMode != "") ? leaveMode : "Away"
+}
+
+private isAnyoneHome()
+{
+    def result = 0
+    for (person in presence1) 
+    {
+        if (person.currentPresence == "present") 
+        {
+            result++
+        }
+    }
+    return result
+}
+
+def checkIfEveryoneIsActuallyGone() {
+    if (isAnyoneHome() == 0) {
+        def threshold = 1000 * 60 * falseAlarmThreshold - 1000
+        def awayLongEnough = presence1.findAll { person ->
+            def presenceState = presence1.currentState("presence")
+            def elapsed = now() - presenceState.rawDateCreated.time
+            elapsed >= threshold
+        }
+        log.debug "Found ${awayLongEnough.size()} out of ${presence1.size()} person(s) who were away long enough"
+        if (awayLongEnough.size() == presence1.size()) {
+            //def message = "${app.label} changed your mode to '${newMode}' because everyone left home"
+            def message = "SmartThings changed your mode to '${findLeaveMode()}' because everyone left home"
+            log.info message
+            send(message)
+            switch1.setLevel(0)
+            state.howManyPeopleAreHome = 0
+            log.warn "Everyone's away."
+            changeMode(findLeaveMode())
+            runIn(30, "VerifyAway", [overwrite: false])
+        } else {
+            log.debug "not everyone has been away long enough; doing nothing"
+        }
+    } else {
+        log.debug "not everyone is away; doing nothing"
+    }
+}
+
+private send(msg) {
+    if ( sendPushMessage != "No" ) {
+        log.debug( "sending push message" )
+        sendPush( msg )
+    }
+
+    if ( phone ) {
+        log.debug( "sending text message" )
+        sendSms( phone, msg )
+    }
+
+    log.debug msg
+}
+
+def changeMode(newMode) 
+{
+    log.warn "changeMode, location.mode = $location.mode, newMode = $newMode, location.modes = $location.modes"
+
+    if (location.mode != newMode) {
+        if (location.modes?.find{it.name == newMode}) {
+            setLocationMode(newMode)
+            log.warn "changeMode, location.mode = $location.mode, newMode = $newMode, location.modes = $location.modes"
+        }  else {
+            log.warn "Tried to change to undefined mode '${newMode}'"
+        }
+    }
+}
+
+def VerifyHome() 
+{
+	log.warn "VerifyHome, location.mode = $location.mode"
+}
+
+def VerifyAway() 
+{
+	log.warn "VerifyAway, location.mode = $location.mode"
+}
+
+def presenceHandler(evt)
+{
+	def now = new Date()
+	def sunTime = getSunriseAndSunset()
+    def tempHowManyPoepleAreHome = isAnyoneHome()
+    
+	log.debug "nowTime: $now"
+	log.debug "riseTime: $sunTime.sunrise"
+	log.debug "setTime: $sunTime.sunset"
+	log.debug "presenceHandler $evt.name: $evt.value"
+	log.debug "The current mode ID is: ${location.currentMode}"
+
+    if(tempHowManyPoepleAreHome == 0)
+    {
+        log.info "starting debounce sequence"
+        runIn(findFalseAlarmThreshold() * 60, "checkIfEveryoneIsActuallyGone", [overwrite: false])
+    }
+	else if(state.howManyPeopleAreHome)
+    {
+    	log.warn "Someone is already Home, no need to take action"
+    }
+    else
+    {
+        log.warn "First person to arrive, need to take action"
+    	state.howManyPeopleAreHome = tempHowManyPoepleAreHome
+        log.debug "How many people are home after update $state.howManyPeopleAreHome"
+        def message = "SmartThings changed your mode to '${findReturnMode()}' because everyone came home"
+        log.info message
+        send(message)
+        changeMode(findReturnMode())
+        runIn(30, "VerifyHome", [overwrite: false])
+        if(state.howManyPeopleAreHome && (now > sunTime.sunset)) 
+        {
+            switch1.setLevel(LightLevel)
+            log.warn "Welcome home at night!"
+        }
+        else if(state.howManyPeopleAreHome && (now < sunTime.sunset)) 
+        {
+            log.warn "Welcome home at daytime!"
+        }
+    }
+}
+
+

smartapps/smartthings/life360-connect.src/life360-connect.groovy

@@ -289,12 +289,12 @@ def initializeLife360Connection() {
        		state.life360AccessToken = result.data.access_token
             return true;
    		}
-		log.debug "Response=${result.data}"
+		log.info "Life360 initializeLife360Connection, response=${result.data}"
         return false;
         
     }
     catch (e) {
-       log.debug e
+       log.error "Life360 initializeLife360Connection, error: $e"
        return false;
     }
 
@@ -656,7 +656,7 @@ def generateInitialEvent (member, childDevice) {
     
     try { // we are going to just ignore any errors
     
-    	log.debug "Generate Initial Event for New Device for Member = ${member.id}"
+    	log.info "Life360 generateInitialEvent($member, $childDevice)"
         
         def place = state.places.find{it.id==settings.place}
         
@@ -677,6 +677,8 @@ def generateInitialEvent (member, childDevice) {
         	// log.debug "Distance Away = ${distanceAway}"
   
   			boolean isPresent = (distanceAway <= placeRadius)
+
+			log.info "Life360 generateInitialEvent, member: ($memberLatitude, $memberLongitude), place: ($placeLatitude, $placeLongitude), radius: $placeRadius, dist: $distanceAway, present: $isPresent"
                 
         	// log.debug "External Id=${app.id}:${member.id}"
         
@@ -718,7 +720,7 @@ def haversine(lat1, lon1, lat2, lon2) {
 
 def placeEventHandler() {
 
-	log.debug "In placeEventHandler method."
+	log.info "Life360 placeEventHandler: params=$params, settings.place=$settings.place"
 
 	// the POST to this end-point will look like:
     // POST http://test.com/webhook?circleId=XXXX&placeId=XXXX&userId=XXXX&direction=arrive
@@ -729,8 +731,6 @@ def placeEventHandler() {
     def direction = params?.direction
     def timestamp = params?.timestamp
     
-    log.debug "Life360 Event: Circle: ${circleId}, Place: ${placeId}, User: ${userId}, Direction: ${direction}"
-
     if (placeId == settings.place) {
 
 		def presenceState = (direction=="in")
@@ -745,10 +745,10 @@ def placeEventHandler() {
 
 		if (deviceWrapper) {
 			deviceWrapper.generatePresenceEvent(presenceState)
-    		log.debug "Event raised on child device: ${externalId}"
+    		log.debug "Life360 event raised on child device: ${externalId}"
 		}
    		else {
-    		log.debug "Couldn't find child device associated with inbound Life360 event."
+    		log.warn "Life360 couldn't find child device associated with inbound Life360 event."
     	}
     }