MSA-1780: turn off a mains switch (i.e. a light) only when all windows are closed (I used a shop "open" sign by the front door, to remind my housemates to close the windows before they leave)

smartapps/nick257b/turn-off-switch.src/turn-off-switch.groovy

@@ -0,0 +1,79 @@
+/**
+ *  Turn Off Switch when Windows/Doors closed
+ *
+ *  Copyright 2017 Nick Mahon
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+definition(
+    name: "Turn Off Switch",
+    namespace: "Nick257b",
+    author: "Nick Mahon",
+    description: "Turn off a switch (e.g. a light), when all specified door/window contact sensors closed",
+    category: "Safety & Security",
+    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
+    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png")
+
+
+preferences {
+    section("Select the switch to turn off") {
+    	input "theSwitch", "capability.switch", title: "Which switch?", required: true, multiple: false
+    }
+	section("when these are ALL closed") {
+		input "contactSensors", "capability.contactSensor", multiple: true
+	}
+    section("Send Push Notification?") {
+		input "sendPush", "bool", required: false,
+		title: "Send Push Notification when ALL closed?"
+	}
+}
+
+def installed() {
+	log.debug "Installed with settings: ${settings}"
+	initialize()
+}
+
+def updated() {
+	log.debug "Updated with settings: ${settings}"
+    unsubscribe()
+    initialize()
+}
+
+def initialize() {
+	subscribe(contactSensors, "contact.closed", contactClosedHandler)
+}
+
+def contactClosedHandler(evt)
+{
+	log.trace "evt.name: $evt.value, $evt.deviceId"
+	if (evt.value == "closed") {
+    	log.debug "isDoorsOpen()? ${isDoorsOpen()}"
+        def device = contactSensors.find { it.id == evt.deviceId }
+        
+    	if (!isDoorsOpen()) {
+        	def message = "${device.displayName} was closed, switching off light as all other selected contacts sensors also in a closed state."
+            log.debug (message)
+            theSwitch.off()
+            
+			if (sendPush) {
+				sendPush(message)
+			}
+			
+		}
+	}
+}
+
+
+def isDoorsOpen() {
+	log.debug "doorss: $contactSensors.currentContact"
+	doors.findAll{it.currentContact == "open"}
+}

smartapps/nnoori0527/switch-control-based-on-motion-door-sensors.src/switch-control-based-on-motion-door-sensors.groovy

@@ -1,179 +0,0 @@
-/**
- *  Switch control based on motion/door sensors
- *
- *  Copyright 2017 narges noori
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-definition(
-    name: "Switch control based on motion/door sensors",
-    namespace: "nnoori0527",
-    author: "narges noori",
-    description: "This application turns on the outlet if the entrace door opens (multipurpose sensor) and there is motion in front of the motion sensor for a user defined amount of time (say 5 minutes). If there is no activity in front of the motion sensor for a user defined amount of time (say 10 minutes) the outlet is turned off.",
-    category: "Convenience",
-    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
-    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
-    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
-    oauth: [displayName: "Switch/outlet control", displayLink: ""])
-
-
-
-
-preferences {
-
-	section ("Allow external service to control these things...") {
-    	input "switches", "capability.switch", multiple: true, required: true
-    }
-    
-    section("Turn on when motion detected after someone opens the door:") {
-        input "motionSensor", "capability.motionSensor", required: true, title: "Where?"
-    }
-    
-    section("Turn on when there's movement for:") {
-        input "minutes", "number", required: true, title: "Minutes to turn on TV?"
-    }
-    section("Turn on when there's movement for:") {
-        input "minutesInactive", "number", required: true, title: "Minutes to wait before turning off TV?"
-    }
-   
-    
-    section("Turn on when door open:") {
-        input "doorOpenCloseDetector", "capability.contactSensor", required: true, title: "Where?"
-    }
-
-    section("Turn on this outlet") {
-        input "tvOutlet", "capability.switch", required: true
-    }
-    
-}
-
-def installed() {
-    initialize()
-}
-
-def updated() {
-    unsubscribe()
-    initialize()
-}
-
-def initialize() {
-    subscribe(doorOpenCloseDetector, "contact.open", doorOpenedHandler)
-    subscribe(motionSensor, "motion.inactive", motionStoppedHandler)
-}
-
-def doorOpenedHandler(evt){
-	log.debug "doorOpenedHandler called: $evt"
-    runIn(60 * minutes, checkMotion)
-    //tvOutlet.on()
-}
-
-def checkMotion() {
-    log.debug "In checkMotion scheduled method"
-
-    def motionState = motionSensor.currentState("motion")
-
-    if (motionState.value == "active") {
-        // get the time elapsed between now and when the motion reported inactive
-        def elapsed = now() - motionState.date.time
-
-        // elapsed time is in milliseconds, so the threshold must be converted to milliseconds too
-        def threshold = 1000 * 60 * minutes
-
-        if (elapsed <= threshold) {
-            log.debug "Motion has stayed active long enough since last check ($elapsed ms):  turning outlet on"
-            //myswitch.on()
-            tvOutlet.on()
-        } else {
-            log.debug "Motion has not stayed active long enough since last check ($elapsed ms):  doing nothing"
-        }
-    } else {
-        // Motion active; just log it and do nothing
-        log.debug "Motion is inactive, do nothing and wait for active"
-    }
-}
-
-def motionStoppedHandler(evt) {
-    log.debug "motionStoppedHandler called: $evt"
-    runIn(60 * (minutesInactive+1), checkMotionTurnOff)
-}
-
-def checkMotionTurnOff() {
-    log.debug "In checkMotionTurnOff scheduled method"
-
-    def motionState = motionSensor.currentState("motion")
-
-    if (motionState.value == "inactive") {
-        // get the time elapsed between now and when the motion reported inactive
-        def elapsed = now() - motionState.date.time
-
-        // elapsed time is in milliseconds, so the threshold must be converted to milliseconds too
-        def threshold = 1000 * 60 * minutesInactive
-
-        if (elapsed >= threshold) {
-            log.debug "Motion has stayed inactive long enough since last check ($elapsed ms):  turning switch off"
-            tvOutlet.off()
-        } else {
-            log.debug "Motion has not stayed inactive long enough since last check ($elapsed ms):  doing nothing"
-        }
-    } else {
-        // Motion active; just log it and do nothing
-        log.debug "Motion is active, do nothing and wait for inactive"
-    }
-} 
-
-
-
-mappings {
-  path("/switches") {
-    action: [
-      GET: "listSwitches"
-    ]
-  }
-  path("/switches/:command") {
-    action: [
-      PUT: "updateSwitches"
-    ]
-  }
-}
-
-// returns a list like
-// [[name: "kitchen lamp", value: "off"], [name: "bathroom", value: "on"]]
-def listSwitches() {
-
-    def resp = []
-    switches.each {
-        resp << [name: it.displayName, value: it.currentValue("switch")]
-    }
-    return resp
-}
-
-void updateSwitches() {
-    // use the built-in request object to get the command parameter
-    def command = params.command
-
-    // all switches have the comand
-    // execute the command on all switches
-    // (note we can do this on the array - the command will be invoked on every element
-    switch(command) {
-        case "on":
-            switches.on()
-            break
-        case "off":
-            switches.off()
-            break
-        default:
-            httpError(400, "$command is not a valid command for all switches specified")
-    }
-
-}
-
-
-