MSA-1818: Yamaha Receiver and Zones

build.gradle

@@ -9,7 +9,7 @@ apply plugin: 'smartthings-slack'
 
 buildscript {
     dependencies {
-        classpath "com.smartthings.deployment:executable-deployment-scripts:1.0.11"
+        classpath "com.smartthings.deployment:executable-deployment-scripts:1.0.8"
     }
     repositories {
         mavenLocal()

devicetypes/fibargroup/fibaro-flood-sensor-zw5.src/fibaro-flood-sensor-zw5.groovy

@@ -21,7 +21,6 @@ metadata {
 		capability "Tamper Alert"
 		capability "Temperature Measurement"
 		capability "Water Sensor"
-		capability "Health Check"
         
         fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x22, 0x85, 0x59, 0x20, 0x80, 0x70, 0x56, 0x5A, 0x7A, 0x72, 0x8E, 0x71, 0x73, 0x98, 0x9C, 0x31, 0x86", outClusters: ""
 	}
@@ -229,9 +228,7 @@ def zwaveEvent(physicalgraph.zwave.commands.deviceresetlocallyv1.DeviceResetLoca
 
 def configure() {
 	log.debug "Executing 'configure'"
-	// Device-Watch simply pings if no device events received for 8 hrs & 2 minutes
+	
-	sendEvent(name: "checkInterval", value: 8 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-
     def cmds = []
     
 	cmds += zwave.wakeUpV2.wakeUpIntervalSet(seconds:21600, nodeid: zwaveHubNodeId)//FGFS' default wake up interval

devicetypes/fibargroup/fibaro-motion-sensor-zw5.src/fibaro-motion-sensor-zw5.groovy

@@ -22,7 +22,6 @@ metadata {
 		capability "Sensor"
 		capability "Tamper Alert"
 		capability "Temperature Measurement"
-		capability "Health Check"
         
         fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x20, 0x86, 0x72, 0x5A, 0x59, 0x85, 0x73, 0x84, 0x80, 0x71, 0x56, 0x70, 0x31, 0x8E, 0x22, 0x30, 0x9C, 0x98, 0x7A", outClusters: ""
 	}
@@ -241,9 +240,7 @@ def zwaveEvent(physicalgraph.zwave.commands.deviceresetlocallyv1.DeviceResetLoca
 
 def configure() {
 	log.debug "Executing 'configure'"
-	// Device-Watch simply pings if no device events received for 8 hrs & 2 minutes
+    
-	sendEvent(name: "checkInterval", value: 8 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-
     def cmds = []
     
     cmds += zwave.wakeUpV2.wakeUpIntervalSet(seconds: 7200, nodeid: zwaveHubNodeId)//FGMS' default wake up interval

devicetypes/redloro-smartthings/yamaha-zone.src/yamaha-zone.groovy

@@ -0,0 +1,282 @@
+/**
+ *  SmartThings Device Handler: Yamaha Zone
+ *
+ *  Author: redloro@gmail.com
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ */
+metadata {
+  definition (name: "Yamaha Zone", namespace: "redloro-smartthings", author: "redloro@gmail.com") {
+
+    /**
+     * List our capabilties. Doing so adds predefined command(s) which
+     * belong to the capability.
+     */
+    capability "Music Player"
+    capability "Switch"
+    capability "Switch Level"
+    capability "Refresh"
+    capability "Polling"
+
+    /**
+     * Define all commands, ie, if you have a custom action not
+     * covered by a capability, you NEED to define it here or
+     * the call will not be made.
+     *
+     * To call a capability function, just prefix it with the name
+     * of the capability, for example, refresh would be "refresh.refresh"
+     */
+    command "source0"
+    command "source1"
+    command "source2"
+    command "source3"
+    command "source4"
+    command "source5"
+    command "mutedOn"
+    command "mutedOff"
+    command "partyModeOn"
+    command "partyModeOff"
+    command "zone"
+  }
+
+  /**
+   * Define the various tiles and the states that they can be in.
+   * The 2nd parameter defines an event which the tile listens to,
+   * if received, it tries to map it to a state.
+   *
+   * You can also use ${currentValue} for the value of the event
+   * or ${name} for the name of the event. Just make SURE to use
+   * single quotes, otherwise it will only be interpreted at time of
+   * launch, instead of every time the event triggers.
+   */
+  tiles(scale: 2) {
+    multiAttributeTile(name:"state", type:"lighting", width:6, height:4) {
+      tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+        attributeState "on", label:'On', action:"switch.off", icon:"st.Electronics.electronics16", backgroundColor:"#79b821", nextState:"off"
+        attributeState "off", label:'Off', action:"switch.on", icon:"st.Electronics.electronics16", backgroundColor:"#ffffff", nextState:"on"
+      }
+      tileAttribute ("source", key: "SECONDARY_CONTROL") {
+        attributeState "source", label:'${currentValue}'
+      }
+    }
+
+    // row
+    //controlTile("volume", "device.volume", "slider", height: 1, width: 6, range:"(0..100)") {
+    controlTile("volume", "device.volume", "slider", height: 1, width: 6, range:"(-80..16)") {
+      state "volume", label: "Volume", action:"music Player.setLevel", backgroundColor:"#00a0dc"
+    }
+
+    // row
+    standardTile("0", "device.source0", decoration: "flat", width: 2, height: 2) {
+      state("off", label:"AV1", action:"source0", icon:"https://raw.githubusercontent.com/redloro/smartthings/master/images/indicator-dot-gray.png", backgroundColor:"#ffffff")
+      state("on", label:"AV1", action:"source0", icon:"https://raw.githubusercontent.com/redloro/smartthings/master/images/indicator-dot-green.png", backgroundColor:"#ffffff")
+    }
+    standardTile("1", "device.source1", decoration: "flat", width: 2, height: 2) {
+      state("off", label:"AV2", action:"source1", icon:"https://raw.githubusercontent.com/redloro/smartthings/master/images/indicator-dot-gray.png", backgroundColor:"#ffffff")
+      state("on", label:"AV2", action:"source1", icon:"https://raw.githubusercontent.com/redloro/smartthings/master/images/indicator-dot-green.png", backgroundColor:"#ffffff")
+    }
+    standardTile("2", "device.source2", decoration: "flat", width: 2, height: 2) {
+      state("off", label:"AV3", action:"source2", icon:"https://raw.githubusercontent.com/redloro/smartthings/master/images/indicator-dot-gray.png", backgroundColor:"#ffffff")
+      state("on", label:"AV3", action:"source2", icon:"https://raw.githubusercontent.com/redloro/smartthings/master/images/indicator-dot-green.png", backgroundColor:"#ffffff")
+    }
+    standardTile("3", "device.source3", decoration: "flat", width: 2, height: 2) {
+      state("off", label:"AV4", action:"source3", icon:"https://raw.githubusercontent.com/redloro/smartthings/master/images/indicator-dot-gray.png", backgroundColor:"#ffffff")
+      state("on", label:"AV4", action:"source3", icon:"https://raw.githubusercontent.com/redloro/smartthings/master/images/indicator-dot-green.png", backgroundColor:"#ffffff")
+    }
+    standardTile("4", "device.source4", decoration: "flat", width: 2, height: 2) {
+      state("off", label:"AV5", action:"source4", icon:"https://raw.githubusercontent.com/redloro/smartthings/master/images/indicator-dot-gray.png", backgroundColor:"#ffffff")
+      state("on", label:"AV5", action:"source4", icon:"https://raw.githubusercontent.com/redloro/smartthings/master/images/indicator-dot-green.png", backgroundColor:"#ffffff")
+    }
+    standardTile("5", "device.source5", decoration: "flat", width: 2, height: 2) {
+      state("off", label:"AV6", action:"source5", icon:"https://raw.githubusercontent.com/redloro/smartthings/master/images/indicator-dot-gray.png", backgroundColor:"#ffffff")
+      state("on", label:"AV6", action:"source5", icon:"https://raw.githubusercontent.com/redloro/smartthings/master/images/indicator-dot-green.png", backgroundColor:"#ffffff")
+    }
+
+    // row
+    standardTile("muted", "device.muted", decoration: "flat", width: 2, height: 2) {
+      state("off", label:'Muted', action:"mutedOn", icon:"https://raw.githubusercontent.com/redloro/smartthings/master/images/indicator-dot-gray.png", backgroundColor:"#ffffff", nextState:"on")
+      state("on", label:'Muted', action:"mutedOff", icon:"https://raw.githubusercontent.com/redloro/smartthings/master/images/indicator-dot-mute.png", backgroundColor:"#ffffff", nextState:"off")
+    }
+    standardTile("partyMode", "device.partyMode", decoration: "flat", width: 2, height: 2, inactiveLabel: false) {
+      state("off", label:'Party Mode', action:"partyModeOn", icon:"https://raw.githubusercontent.com/redloro/smartthings/master/images/indicator-dot-gray.png", backgroundColor:"#ffffff", nextState:"on")
+      state("on", label:'Party Mode', action:"partyModeOff", icon:"https://raw.githubusercontent.com/redloro/smartthings/master/images/indicator-dot-party.png", backgroundColor:"#ffffff", nextState:"off")
+    }
+    standardTile("refresh", "device.status", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+      state "default", label:"Refresh", action:"refresh.refresh", icon:"st.secondary.refresh-icon", backgroundColor:"#ffffff"
+    }
+
+    // Defines which tile to show in the overview
+    main "state"
+
+    // Defines which tile(s) to show when user opens the detailed view
+    details([
+      "state",
+      "volume",
+      "0","1","2","3","4","5",
+      "muted", "partyMode","refresh"
+    ])
+  }
+
+  preferences {
+    input name: "source0", type: "text", title: "Source 1", defaultValue: "AV1"
+    input name: "source1", type: "text", title: "Source 2", defaultValue: "AV2"
+    input name: "source2", type: "text", title: "Source 3", defaultValue: "AV3"
+    input name: "source3", type: "text", title: "Source 4", defaultValue: "AV4"
+    input name: "source4", type: "text", title: "Source 5", defaultValue: "AV5"
+    input name: "source5", type: "text", title: "Source 6", defaultValue: "AV6"
+  }
+}
+
+/**************************************************************************
+ * The following section simply maps the actions as defined in
+ * the metadata into onAction() calls.
+ *
+ * This is preferred since some actions can be dealt with more
+ * efficiently this way. Also keeps all user interaction code in
+ * one place.
+ *
+ */
+def on() {
+  sendCommand("<YAMAHA_AV cmd=\"PUT\"><${getZone()}><Power_Control><Power>On</Power></Power_Control></${getZone()}></YAMAHA_AV>")
+  sendEvent(name: "switch", value: "on")
+}
+def off() {
+  sendCommand("<YAMAHA_AV cmd=\"PUT\"><${getZone()}><Power_Control><Power>Standby</Power></Power_Control></${getZone()}></YAMAHA_AV>")
+  sendEvent(name: "switch", value: "off")
+}
+def setLevel(value) {
+  //sendCommand("<YAMAHA_AV cmd=\"PUT\"><${getZone()}><Volume><Lvl><Val>${(Math.round(value * 9 / 5) * 5 - 800).intValue()}</Val><Exp>1</Exp><Unit>dB</Unit></Lvl></Volume></${getZone()}></YAMAHA_AV>")
+  sendCommand("<YAMAHA_AV cmd=\"PUT\"><${getZone()}><Volume><Lvl><Val>${(value * 10).intValue()}</Val><Exp>1</Exp><Unit>dB</Unit></Lvl></Volume></${getZone()}></YAMAHA_AV>")
+  sendEvent(name: "volume", value: value)
+}
+def source0() {
+  setSource(0)
+}
+def source1() {
+  setSource(1)
+}
+def source2() {
+  setSource(2)
+}
+def source3() {
+  setSource(3)
+}
+def source4() {
+  setSource(4)
+}
+def source5() {
+  setSource(5)
+}
+def mutedOn() {
+  sendCommand("<YAMAHA_AV cmd=\"PUT\"><${getZone()}><Volume><Mute>On</Mute></Volume></${getZone()}></YAMAHA_AV>")
+  sendEvent(name: "muted", value: "on")
+}
+def mutedOff() {
+  sendCommand("<YAMAHA_AV cmd=\"PUT\"><${getZone()}><Volume><Mute>Off</Mute></Volume></${getZone()}></YAMAHA_AV>")
+  sendEvent(name: "muted", value: "off")
+}
+def partyModeOn() {
+  sendCommand("<YAMAHA_AV cmd=\"PUT\"><System><Party_Mode><Mode>On</Mode></Party_Mode></System></YAMAHA_AV>")
+  sendEvent(name: "partyMode", value: "on")
+}
+def partyModeOff() {
+  sendCommand("<YAMAHA_AV cmd=\"PUT\"><System><Party_Mode><Mode>Off</Mode></Party_Mode></System></YAMAHA_AV>")
+  sendEvent(name: "partyMode", value: "off")
+}
+def refresh() {
+  sendCommand("<YAMAHA_AV cmd=\"GET\"><${getZone()}><Basic_Status>GetParam</Basic_Status></${getZone()}></YAMAHA_AV>")
+  sendCommand("<YAMAHA_AV cmd=\"GET\"><System><Party_Mode><Mode>GetParam</Mode></Party_Mode></System></YAMAHA_AV>")
+}
+/**************************************************************************/
+
+/**
+ * Called every so often (every 5 minutes actually) to refresh the
+ * tiles so the user gets the correct information.
+ */
+def poll() {
+  refresh()
+}
+
+def parse(String description) {
+  return
+}
+
+def setSource(id) {
+  //log.debug "source: "+getSourceName(id)
+  sendCommand("<YAMAHA_AV cmd=\"PUT\"><${getZone()}><Input><Input_Sel>"+getSourceName(id)+"</Input_Sel></Input></${getZone()}></YAMAHA_AV>")
+  setSourceTile(getSourceName(id))
+}
+
+def getSourceName(id) {
+  if (settings) {
+    return settings."source${id}"
+  } else {
+    return ['AV1', 'AV2', 'AV3', 'AV4', 'AV5', 'AV6'].get(id)
+  }
+}
+
+def setSourceTile(name) {
+  sendEvent(name: "source", value: "Source: ${name}")
+  for (def i = 0; i < 6; i++) {
+    if (name == getSourceName(i)) {
+      sendEvent(name: "source${i}", value: "on")
+    }
+    else {
+      sendEvent(name: "source${i}", value: "off")
+    }
+  }
+}
+
+def zone(evt) {
+  /*
+  * Zone On/Off
+  */
+  if (evt.Basic_Status.Power_Control.Power.text()) {
+    sendEvent(name: "switch", value: (evt.Basic_Status.Power_Control.Power.text() == "On") ? "on" : "off")
+  }
+
+  /*
+  * Zone Volume
+  */
+  if (evt.Basic_Status.Volume.Lvl.Val.text()) {
+    def int volLevel = evt.Basic_Status.Volume.Lvl.Val.toInteger() ?: -250
+    //sendEvent(name: "volume", value: ((volLevel + 800) / 9).intValue())
+    sendEvent(name: "volume", value: (volLevel / 10).intValue())
+  }
+
+  /*
+  * Zone Muted
+  */
+  if (evt.Basic_Status.Volume.Mute.text()) {
+    sendEvent(name: "muted", value: (evt.Basic_Status.Volume.Mute.text() == "On") ? "on" : "off")
+  }
+
+  /*
+  * Zone Source
+  */
+  if (evt.Basic_Status.Input.Input_Sel.text()) {
+    setSourceTile(evt.Basic_Status.Input.Input_Sel.text())
+  }
+
+  /*
+  * Party Mode
+  */
+  if (evt.Party_Mode.Mode.text()) {
+    sendEvent(name: "partyMode", value: (evt.Party_Mode.Mode.text() == "On") ? "on" : "off")
+  }
+}
+
+private sendCommand(body) {
+  parent.sendCommand(body)
+}
+
+private getZone() {
+  return new String(device.deviceNetworkId).tokenize('|')[2]
+}

devicetypes/smartthings/fibaro-flood-sensor.src/fibaro-flood-sensor.groovy

@@ -39,8 +39,6 @@ metadata {
 		capability "Temperature Measurement"
 		capability "Configuration"
 		capability "Battery"
-		capability "Health Check"
-		capability "Sensor"
        
         command		"resetParams2StDefaults"
         command		"listCurrentParams"
@@ -306,9 +304,6 @@ def lateConfigure(setConf = False) {
  */
 def configure() {
 	log.debug "Configuring Device..."
-	// Device-Watch simply pings if no device events received for 8 hrs & 2 minutes
-	sendEvent(name: "checkInterval", value: 8 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-
     def cmds = []
     
     // send associate to group 2 to get alarm data

devicetypes/smartthings/fibaro-motion-sensor.src/fibaro-motion-sensor.groovy

@@ -46,7 +46,6 @@
 		capability 	"Illuminance Measurement"
 		capability 	"Sensor"
 		capability 	"Battery"
-		capability  "Health Check"
         
         command		"resetParams2StDefaults"
         command		"listCurrentParams"
@@ -126,9 +125,6 @@
  */
 def configure() {
 	log.debug "Configuring Device For SmartThings Use"
-	// Device-Watch simply pings if no device events received for 8 hrs & 2 minutes
-	sendEvent(name: "checkInterval", value: 8 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-
     def cmds = []
     
     // send associate to group 3 to get sensor data reported only to hub

devicetypes/smartthings/nyce-motion-sensor.src/nyce-motion-sensor.groovy

@@ -21,7 +21,6 @@ metadata {
 		capability "Configuration"
 		capability "Battery"
 		capability "Refresh"
-		capability "Sensor"
         
         command "enrollResponse"
 

devicetypes/smartthings/nyce-open-closed-sensor.src/nyce-open-closed-sensor.groovy

@@ -24,7 +24,6 @@ metadata {
 		capability "Contact Sensor"
 		capability "Refresh"
 		capability "Health Check"
-		capability "Sensor"
 
 		command "enrollResponse"
 

smartapps/gideon-api/gideon-smart-home.src/gideon-smart-home.groovy

@@ -1,794 +0,0 @@
-/**
- *  Gideon
- *
- *  Copyright 2016 Nicola Russo
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-definition(
-    name: "Gideon Smart Home",
-    namespace: "gideon.api",
-    author: "Braindrain Solutions ltd",
-    description: "Gideon Smart Home SmartApp allows you to connect and control all of your SmartThings devices through the Gideon app, making your SmartThings devices even smarter.",
-    category: "Family",
-    iconUrl: "http://s33.postimg.org/t77u7y7v3/logo.png",
-    iconX2Url: "http://s33.postimg.org/t77u7y7v3/logo.png",
-    iconX3Url: "http://s33.postimg.org/t77u7y7v3/logo.png",
-    oauth: [displayName: "Gideon Smart Home API app", displayLink: "gideon.ai"])
-
-preferences {
-	section("Control these contact sensors...") {
-        input "contact", "capability.contactSensor", multiple:true, required:false
-    }
-    section("Control these switch levels...") {
-        input "switchlevels", "capability.switchLevel", multiple:true, required:false
-    }
-/*    section("Control these thermostats...") {
-        input "thermostats", "capability.thermostat", multiple:true, required:false
-    }*/
-    section("Control the color for these devices...") {
-        input "colors", "capability.colorControl", multiple:true, required:false
-    }
-    section("Control the color temperature for these devices...") {
-        input "kelvin", "capability.colorTemperature", multiple:true, required:false
-    }
-	section("Control these switches...") {
-        input "switches", "capability.switch", multiple:true, required:false
-    }
-    section("Control these smoke alarms...") {
-        input "smoke_alarms", "capability.smokeDetector", multiple:true, required:false
-    }
-    section("Control these window shades...") {
-        input "shades", "capability.windowShade", multiple:true, required:false
-    }
-    section("Control these garage doors...") {
-        input "garage", "capability.garageDoorControl", multiple:true, required:false
-    }
-    section("Control these water sensors...") {
-        input "water_sensors", "capability.waterSensor", multiple:true, required:false
-    }
-    section("Control these motion sensors...") {
-        input "motions", "capability.motionSensor", multiple:true, required:false
-    }
-    section("Control these presence sensors...") {
-    	input "presence_sensors", "capability.presenceSensor", multiple:true, required:false
-    }
-	section("Control these outlets...") {
-    	input "outlets", "capability.outlet", multiple:true, required:false
-    }
-    section("Control these power meters...") {
-        input "meters", "capability.powerMeter", multiple:true, required:false
-    }
-    section("Control these locks...") {
-    	input "locks", "capability.lock", multiple:true, required:false
-    }
-    section("Control these temperature sensors...") {
-	    input "temperature_sensors", "capability.temperatureMeasurement", multiple:true, required:false
-    }
-    section("Control these batteries...") {
-	    input "batteries", "capability.battery", multiple:true, required:false
-    }
-}
-
-def installed() {
-	log.debug "Installed with settings: ${settings}"
-
-	initialize()
-}
-
-def updated() {
-	log.debug "Updated with settings: ${settings}"
-
-	unsubscribe()
-	initialize()
-}
-
-def initialize() {
-}
-
-private device(it, type) {
-	it ? [id: it.id, label: it.label, type: type] : null
-}
-
-//API Mapping
-mappings {
-   path("/getalldevices") {
-    action: [
-      	GET: "getAllDevices"
-   ]
-  }
-  /*
-  path("/thermostat/setcool/:id/:temp") {
-    action: [
-      GET: "setCoolTemp"
-    ]
-  }
-  path("/thermostat/setheat/:id/:temp") {
-    action: [
-      GET: "setHeatTemp"
-    ]
-  }
-  path("/thermostat/setfanmode/:id/:mode") {
-    action: [
-      GET: "setFanMode"
-    ]
-  }
-  path("/thermostat/setmode/:id/:mode") {
-    action: [
-      GET: "setThermostatMode"
-    ]
-  }
-  path("/thermostat/:id") {
-    action: [
-      GET: "getThermostatStatus"
-    ]
-  }
-  */
-  path("/light/dim/:id/:dim") {
-    action: [
-      GET: "setLevelStatus"
-    ]
-  }
-  path("/light/kelvin/:id/:kelvin") {
-    action: [
-      GET: "setKelvin"
-    ]
-  }
-  path("/colorlight/:id/:hue/:sat") {
-    action: [
-      GET: "setColor"
-    ]
-  }
-  path("/light/status/:id") {
-    action: [
-      GET: "getLightStatus"
-    ]
-  }
-  path("/light/on/:id") {
-    action: [
-      GET: "turnOnLight"
-    ]
-  }
-  path("/light/off/:id") {
-    action: [
-      GET: "turnOffLight"
-    ]
-  }
-  path("/doorlocks/lock/:id") {
-    action: [
-      GET: "lockDoorLock"
-    ]
-  }
-  path("/doorlocks/unlock/:id") {
-    action: [
-      GET: "unlockDoorLock"
-    ]
-  }
-  path("/doorlocks/:id") {
-    action: [
-      GET: "getDoorLockStatus"
-    ]
-  }
-  path("/contacts/:id") {
-    action: [
-  	GET: "getContactStatus"
-    ]
-  }
-  path("/smoke/:id") {
-    action: [
-   	GET: "getSmokeStatus"
-	]
-  }
-    path("/shades/open/:id") {
-    action: [
-      GET: "openShade"
-    ]
-  }
-  path("/shades/preset/:id") {
-    action: [
-      GET: "presetShade"
-    ]
-  }
-  path("/shades/close/:id") {
-    action: [
-      GET: "closeShade"
-    ]
-  }
-  	path("/shades/:id") {
-    action: [
-	GET: "getShadeStatus"
-	]
-}
-    path("/garage/open/:id") {
-    action: [
-      GET: "openGarage"
-    ]
-  }
-  path("/garage/close/:id") {
-    action: [
-      GET: "closeGarage"
-    ]
-  }
-  	path("/garage/:id") {
-    action: [
-  		GET: "getGarageStatus"
-  	]
-  }
-    path("/watersensors/:id") {
-    action: [
-      		GET: "getWaterSensorStatus"
-    	]
-  }
-  	path("/tempsensors/:id") {
-    action: [
-      GET: "getTempSensorsStatus"
-    ]
-  }
-  path("/meters/:id") {
-    action: [
-      GET: "getMeterStatus"
-    ]
-  }
-  path("/batteries/:id") {
-    action: [
-      GET: "getBatteryStatus"
-    ]
-  }
-  	path("/presences/:id") {
-    action: [
-      GET: "getPresenceStatus"
-    ]
-  }
-  	path("/motions/:id") {
-    action: [
-      GET: "getMotionStatus"
-    ]
-  }
-  	path("/outlets/:id") {
-    action: [
-      GET: "getOutletStatus"
-    ]
-  }
-  	path("/outlets/turnon/:id") {
-    action: [
-      GET: "turnOnOutlet"
-    ]
-  }
-  path("/outlets/turnoff/:id") {
-    action: [
-      GET: "turnOffOutlet"
-    ]
-  }
-  path("/switches/turnon/:id") {
-    action: [
-      GET: "turnOnSwitch"
-    ]
-  }
-  path("/switches/turnoff/:id") {
-    action: [
-      GET: "turnOffSwitch"
-    ]
-  }
-  path("/switches/:id") {
-    action: [
-      GET: "getSwitchStatus"
-    ]
-  }
-}
-
-//API Methods
-def getAllDevices() {
-    def locks_list = locks.collect{device(it,"Lock")}
-    /*def thermo_list = thermostats.collect{device(it,"Thermostat")}*/
-    def colors_list = colors.collect{device(it,"Color")}
-    def kelvin_list = kelvin.collect{device(it,"Kelvin")}
-    def contact_list = contact.collect{device(it,"Contact Sensor")}
-    def smokes_list = smoke_alarms.collect{device(it,"Smoke Alarm")}
-    def shades_list = shades.collect{device(it,"Window Shade")}
-    def garage_list = garage.collect{device(it,"Garage Door")}
-    def water_sensors_list = water_sensors.collect{device(it,"Water Sensor")}
-    def presences_list = presence_sensors.collect{device(it,"Presence")}
-    def motions_list = motions.collect{device(it,"Motion")}
-	def outlets_list = outlets.collect{device(it,"Outlet")}
-    def switches_list = switches.collect{device(it,"Switch")}
-    def switchlevels_list = switchlevels.collect{device(it,"Switch Level")}
-    def temp_list = temperature_sensors.collect{device(it,"Temperature")}
-    def meters_list = meters.collect{device(it,"Power Meters")}
-    def battery_list = batteries.collect{device(it,"Batteries")}
-    return outlets_list + kelvin_list + colors_list + switchlevels_list + smokes_list + contact_list + water_sensors_list + shades_list + garage_list + locks_list + presences_list + motions_list + switches_list + temp_list + meters_list + battery_list
-}
-
-//thermostat
-/*
-def setCoolTemp() {
-	def device = thermostats.find { it.id == params.id }
-        if (!device) {
-            httpError(404, "Device not found")
-        } else {
-            if(device.hasCommand("setCoolingSetpoint")) {
-            	device.setCoolingSetpoint(params.temp.toInteger());
-                return [result_action: "200"]
-            }
-            else {
-            	httpError(510, "Not supported!")
-            }
-       }
-}
-def setHeatTemp() {
-	def device = thermostats.find { it.id == params.id }
-        if (!device) {
-            httpError(404, "Device not found")
-        } else {
-            if(device.hasCommand("setHeatingSetpoint")) {
-            	device.setHeatingSetpoint(params.temp.toInteger());
-                return [result_action: "200"]
-            }
-            else {
-            	httpError(510, "Not supported!")
-            }
-       }
-}
-def setFanMode() {
-	def device = thermostats.find { it.id == params.id }
-        if (!device) {
-            httpError(404, "Device not found")
-        } else {
-        if(device.hasCommand("setThermostatFanMode")) {
-            	device.setThermostatFanMode(params.mode);
-                return [result_action: "200"]
-            }
-            else {
-            	httpError(510, "Not supported!")
-            }
-       }
-}
-def setThermostatMode() {
-	def device = thermostats.find { it.id == params.id }
-        if (!device) {
-            httpError(404, "Device not found")
-        } else {
-        if(device.hasCommand("setThermostatMode")) {
-            	device.setThermostatMode(params.mode);
-                return [result_action: "200"]
-            }
-            else {
-            	httpError(510, "Not supported!")
-            }
-       }
-}
-def getThermostatStatus() {
-	def device = thermostats.find{ it.id == params.id }
-    if (!device) {
-            httpError(404, "Device not found")
-        } else {
-        	return [ThermostatOperatingState: device.currentValue('thermostatOperatingState'), ThermostatSetpoint: device.currentValue('thermostatSetpoint'), 
-            			ThermostatFanMode: device.currentValue('thermostatFanMode'), ThermostatMode: device.currentValue('thermostatMode')]
-       	}
-}
-*/
-//light
-def turnOnLight() {
-    def device = switches.find { it.id == params.id }
-        if (!device) {
-            httpError(404, "Device not found")
-        } else {
-            device.on();
-                  
-            return [Device_id: params.id, result_action: "200"]
-        }
-    }
-
-def turnOffLight() {
-    def device = switches.find { it.id == params.id }
-        if (!device) {
-            httpError(404, "Device not found")
-        } else {
-            device.off();
-                  
-            return [Device_id: params.id, result_action: "200"]
-        }
-}
-
-def getLightStatus() {
-	def device = switches.find{ it.id == params.id }
-    if (!device) {
-            httpError(404, "Device not found")
-        } else {
-        	return [Status: device.currentValue('switch'), Dim: getLevelStatus(params.id), Color: getColorStatus(params.id), Kelvin: getKelvinStatus(params.id)]
-        }
-}
-
-//color control
-def setColor() {
-    def device = colors.find { it.id == params.id }
-        if (!device) {
-            httpError(404, "Device not found")
-        } else {
-        	
-            def map = [hue:params.hue.toInteger(), saturation:params.sat.toInteger()]
-            
-            device.setColor(map);
-                  
-            return [Device_id: params.id, result_action: "200"]
-    }
-}
-
-def getColorStatus(id) {
-	def device = colors.find { it.id == id }
-    if (!device) {
-            return [Color: "none"]
-        } else {
-        	return [hue: device.currentValue('hue'), saturation: device.currentValue('saturation')]
-        }
-}
-
-//kelvin control
-def setKelvin() {
-    def device = kelvin.find { it.id == params.id }
-        if (!device) {
-            httpError(404, "Device not found")
-        } else {
-        
-            device.setColorTemperature(params.kelvin.toInteger());
-                  
-            return [Device_id: params.id, result_action: "200"]
-    }
-}
-
-def getKelvinStatus(id) {
-	def device = kelvin.find { it.id == id }
-    if (!device) {
-            return [kelvin: "none"]
-        } else {
-        	return [kelvin: device.currentValue('colorTemperature')]
-        }
-}
-
-//switch level
-def getLevelStatus() {
-	def device = switchlevels.find { it.id == params.id }
-    if (!device) {
-            [Level: "No dimmer"]
-        } else {
-        	return [Level: device.currentValue('level')]
-        }
-}
-
-def getLevelStatus(id) {
-	def device = switchlevels.find { it.id == id }
-    if (!device) {
-            [Level: "No dimmer"]
-        } else {
-        	return [Level: device.currentValue('level')]
-        }
-}
-
-
-def setLevelStatus() {
-	def device = switchlevels.find { it.id == params.id }
-    def level = params.dim
-    if (!device) {
-            httpError(404, "Device not found")
-        } else {
-        	device.setLevel(level.toInteger())
-        	return [result_action: "200", Level: device.currentValue('level')]
-        }
-}
-
-
-//contact sensors
-def getContactStatus() {
-	def device = contact.find { it.id == params.id }
-    if (!device) {
-            httpError(404, "Device not found")
-        } else {
-        	def args = getTempSensorsStatus(device.id)
-        	return [Device_state: device.currentValue('contact')] + args
-        }
-}
-
-//smoke detectors
-def getSmokeStatus() {
-	def device = smoke_alarms.find { it.id == params.id }
-    if (!device) {
-            httpError(404, "Device not found")
-        } else {
-        def bat = getBatteryStatus(device.id)
-        	return [Device_state: device.currentValue('smoke')] + bat
-        }
-}
-
-//garage
-def getGarageStatus() {
-	def device = garage.find { it.id == params.id }
-    if (!device) {
-            httpError(404, "Device not found")
-        } else {
-        	return [Device_state: device.currentValue('door')]
-        }
-}
-
-def openGarage() {
-    def device = garage.find { it.id == params.id }
-    if (!device) {
-            httpError(404, "Device not found")
-        } else {
-            
-            device.open();
-                  
-            return [Device_id: params.id, result_action: "200"]                              
-            }
-    }
-
-def closeGarage() {
-	def device = garage.find { it.id == params.id }
-    if (!device) {
-            httpError(404, "Device not found")
-        } else {
-            
-            device.close();
-                  
-            return [Device_id: params.id, result_action: "200"]                              
-            }
-    }
-//shades
-def getShadeStatus() {
-	def device = shades.find { it.id == params.id }
-    if (!device) {
-            httpError(404, "Device not found")
-        } else {
-        	return [Device_state: device.currentValue('windowShade')]
-        }
-}
-
-def openShade() {
-    def device = shades.find { it.id == params.id }
-    if (!device) {
-            httpError(404, "Device not found")
-        } else {
-            
-            device.open();
-                  
-            return [Device_id: params.id, result_action: "200"]                              
-            }
-    }
-    
-def presetShade() {
-    def device = shades.find { it.id == params.id }
-    if (!device) {
-            httpError(404, "Device not found")
-        } else {
-            
-            device.presetPosition();
-                  
-            return [Device_id: params.id, result_action: "200"]                              
-            }
-    }
-
-def closeShade() {
-	def device = shades.find { it.id == params.id }
-    if (!device) {
-            httpError(404, "Device not found")
-        } else {
-            
-            device.close();
-                  
-            return [Device_id: params.id, result_action: "200"]                              
-            }
-    }
-
-//water sensor
-def getWaterSensorStatus() {
-	def device = water_sensors.find { it.id == params.id }
-    if (!device) {
-            httpError(404, "Device not found")
-        } else {
-        	def bat = getBatteryStatus(device.id)
-        	return [Device_state: device.currentValue('water')] + bat
-        }
-}
-//batteries
-def getBatteryStatus() {
-	def device = batteries.find { it.id == params.id }
-    if (!device) {
-            httpError(404, "Device not found")
-        } else {
-        	return [Device_state: device.latestValue("battery")]
-        }
-}
-
-def getBatteryStatus(id) {
-	def device = batteries.find { it.id == id }
-    if (!device) {
-            return []
-        } else {
-        	return [battery_state: device.latestValue("battery")]
-        }
-}
-
-//LOCKS
-def getDoorLockStatus() {
-	def device = locks.find { it.id == params.id }
-    if (!device) {
-            httpError(404, "Device not found")
-        } else {
-        	def bat = getBatteryStatus(device.id)
-        	return [Device_state: device.currentValue('lock')] + bat
-        }
-}
-
-def lockDoorLock() {
-    def device = locks.find { it.id == params.id }
-    if (!device) {
-            httpError(404, "Device not found")
-        } else {
-            
-            device.lock();
-                  
-            return [Device_id: params.id, result_action: "200"]                              
-            }
-    }
-
-def unlockDoorLock() {
-	def device = locks.find { it.id == params.id }
-    if (!device) {
-            httpError(404, "Device not found")
-        } else {
-            
-            device.unlock();
-                  
-            return [Device_id: params.id, result_action: "200"]                              
-            }
-    }
-//PRESENCE
-def getPresenceStatus() {
-
-	def device = presence_sensors.find { it.id == params.id }
-    if (!device) {
-            httpError(404, "Device not found")
-        } else {
-        def bat = getBatteryStatus(device.id)
-        	return [Device_state: device.currentValue('presence')] + bat
-   }
-}
-
-//MOTION
-def getMotionStatus() {
-
-	def device = motions.find { it.id == params.id }
-    if (!device) {
-            httpError(404, "Device not found")
-        } else {
-        	def args = getTempSensorsStatus(device.id)
-        	return [Device_state: device.currentValue('motion')] + args
-   }
-}
-
-//OUTLET
-def getOutletStatus() {
-
-    def device = outlets.find { it.id == params.id }
-    if (!device) {
-            device = switches.find { it.id == params.id }
-            if(!device) {
-            	httpError(404, "Device not found")
-        	}
-     }
-     def watt = getMeterStatus(device.id)
-       	
-     return [Device_state: device.currentValue('switch')] + watt
-}
-
-def getMeterStatus() {
-
-    def device = meters.find { it.id == params.id }
-   	if (!device) {
-            httpError(404, "Device not found")
-        } else {
-        	return [Device_id: device.id, Device_type: device.type, Current_watt: device.currentValue("power")]
-  }
-}
-
-def getMeterStatus(id) {
-
-    def device = meters.find { it.id == id }
-   	if (!device) {
-            return []
-        } else {
-        	return [Current_watt: device.currentValue("power")]
-  }
-}
-
-
-def turnOnOutlet() {
-    def device = outlets.find { it.id == params.id }
-    if (!device) {
-            device = switches.find { it.id == params.id }
-            if(!device) {
-            	httpError(404, "Device not found")
-        	}
-     }
-     
-     device.on();
-                  
-     return [Device_id: params.id, result_action: "200"]
-}
-
-def turnOffOutlet() {
-    def device = outlets.find { it.id == params.id }
-    if (!device) {
-            device = switches.find { it.id == params.id }
-            if(!device) {
-            	httpError(404, "Device not found")
-        	}
-     }
-            
-     device.off();
-                  
-     return [Device_id: params.id, result_action: "200"]
-}
-
-//SWITCH
-def getSwitchStatus() {
-	def device = switches.find { it.id == params.id }
-    if (!device) {
-            httpError(404, "Device not found")
-        } else {
-        	return [Device_state: device.currentValue('switch'), Dim: getLevelStatus(params.id)]
-	}
-}
-
-def turnOnSwitch() {
-    def device = switches.find { it.id == params.id }
-        if (!device) {
-            httpError(404, "Device not found")
-        } else {
-            
-            device.on();
-                  
-            return [Device_id: params.id, result_action: "200"]
-        }
-}
-
-def turnOffSwitch() {
-    def device = switches.find { it.id == params.id }
-        if (!device) {
-            httpError(404, "Device not found")
-        } else {
-            
-            device.off();
-                  
-            return [Device_id: params.id, result_action: "200"]
-        }
-}
-
-
-//TEMPERATURE
-def getTempSensorsStatus() {
-    def device = temperature_sensors.find { it.id == params.id }
-    if (!device) {
-            httpError(404, "Device not found")
-        } else {
-        	def bat = getBatteryStatus(device.id)
-            def scale = [Scale: location.temperatureScale]
-        	return [Device_state: device.currentValue('temperature')] + scale + bat
-   }
-}
-
-def getTempSensorsStatus(id) {	
-    def device = temperature_sensors.find { it.id == id }
-    if (!device) {
-            return []
-        } else {
-        	def bat = getBatteryStatus(device.id)
-        	return [temperature: device.currentValue('temperature')] + bat
-   		}
-   }

smartapps/opent2t/opent2t-smartapp-test.src/opent2t-smartapp-test.groovy

@@ -39,7 +39,7 @@ definition(
  *  garageDoors         | door          | open, close           | unknown, closed, open, closing, opening
  *  cameras             | image         | take                  | <String>
  *  thermostats         | thermostat    | setHeatingSetpoint,   | temperature, heatingSetpoint, coolingSetpoint,
- *	                    |				| setCoolingSetpoint,   | thermostatSetpoint, thermostatMode,
+ * 	                    |				| setCoolingSetpoint,   | thermostatSetpoint, thermostatMode,
  *                      |				| off, heat, cool, auto,| thermostatFanMode, thermostatOperatingState
  *                      |				| emergencyHeat,        |
  *                      |				| setThermostatMode,    |
@@ -55,7 +55,7 @@ preferences {
 		input "contactSensors", "capability.contactSensor", title: "Which Contact Sensors", multiple: true, required: false
 		input "garageDoors", "capability.garageDoorControl", title: "Which Garage Doors?", multiple: true, required: false
 		input "locks", "capability.lock", title: "Which Locks?", multiple: true, required: false
-		input "cameras", "capability.videoCapture", title: "Which Cameras?",  multiple: true, required: false
+		input "cameras", "capability.videoCapture", title: "Which Cameras?", multiple: true, required: false
 		input "motionSensors", "capability.motionSensor", title: "Which Motion Sensors?", multiple: true, required: false
 		input "presenceSensors", "capability.presenceSensor", title: "Which Presence Sensors", multiple: true, required: false
 		input "switches", "capability.switch", title: "Which Switches and Lights?", multiple: true, required: false
@@ -66,48 +66,54 @@ preferences {
 
 def getInputs() {
 	def inputList = []
-	inputList += contactSensors?: []
+	inputList += contactSensors ?: []
-	inputList += garageDoors?: []
+	inputList += garageDoors ?: []
-	inputList += locks?: []
+	inputList += locks ?: []
-	inputList += cameras?: []
+	inputList += cameras ?: []
-	inputList += motionSensors?: []
+	inputList += motionSensors ?: []
-	inputList += presenceSensors?: []
+	inputList += presenceSensors ?: []
-	inputList += switches?: []
+	inputList += switches ?: []
-	inputList += thermostats?: []
+	inputList += thermostats ?: []
-	inputList += waterSensors?: []
+	inputList += waterSensors ?: []
 	return inputList
 }
 
 //API external Endpoints
 mappings {
 	path("/subscriptionURL/:url") {
-		action: [
+		action:
+		[
 				PUT: "updateEndpointURL"
 		]
 	}
 	path("/connectionId/:connId") {
-		action: [
+		action:
+		[
 				PUT: "updateConnectionId"
 		]
 	}
 	path("/devices") {
-		action: [
+		action:
+		[
 				GET: "getDevices"
 		]
 	}
 	path("/devices/:id") {
-		action: [
+		action:
+		[
 				GET: "getDevice"
 		]
 	}
 	path("/update/:id") {
-		action: [
+		action:
+		[
 				PUT: "updateDevice"
 		]
 	}
 	path("/subscription/:id") {
-		action: [
+		action:
-				POST: "registerDeviceChange",
+		[
+				POST  : "registerDeviceChange",
 				DELETE: "unregisterDeviceChange"
 		]
 	}
@@ -139,7 +145,7 @@ def registerSubscriptions() {
 def registerChangeHandler(myList) {
 	myList.each { myDevice ->
 		def theAtts = myDevice.supportedAttributes
-		theAtts.each {att ->
+		theAtts.each { att ->
 			subscribe(myDevice, att.name, eventHandler)
 			log.info "Registering ${myDevice.displayName}.${att.name}"
 		}
@@ -151,7 +157,7 @@ def registerDeviceChange() {
 	def myDevice = findDevice(params.id)
 	def theAtts = myDevice.supportedAttributes
 	try {
-		theAtts.each {att ->
+		theAtts.each { att ->
 			subscribe(myDevice, att.name, eventHandler)
 			log.info "Registering ${myDevice.displayName}.${att.name}"
 		}
@@ -180,20 +186,16 @@ def eventHandler(evt) {
 	def evt_name = evt.name
 	def evt_device = evt.device
 	def evt_deviceType = getDeviceType(evt_device);
-	def deviceInfo
-
-	if(evt_deviceType == "thermostat")
-	{
-		deviceInfo = [name: evt_device.displayName, id: evt_device.id, status:evt_device.getStatus(), deviceType:evt_deviceType, manufacturer:evt_device.getManufacturerName(), model:evt_device.getModelName(), attributes: deviceAttributeList(evt_device), locationMode: getLocationModeInfo()]
-	}
-	else
-	{
-		deviceInfo = [name: evt_device.displayName, id: evt_device.id, status:evt_device.getStatus(), deviceType:evt_deviceType, manufacturer:evt_device.getManufacturerName(), model:evt_device.getModelName(), attributes: deviceAttributeList(evt_device)]
-	}
-
 	def params = [
-			uri: "${state.endpointURL}/${state.connectionId}",
+			uri : "${state.endpointURL}/${state.connectionId}",
-			body: [ deviceInfo ]
+			body: [
+					name        : evt_device.displayName,
+					id          : evt_device.id,
+					deviceType  : evt_deviceType,
+					manufacturer: evt_device.getManufacturerName(),
+					model       : evt_device.getModelName(),
+					attributes  : deviceAttributeList(evt_device)
+			]
 	]
 	try {
 		log.trace "POST URI: ${params.uri}"
@@ -228,13 +230,10 @@ def getDevices() {
 	def deviceData = []
 	inputs?.each {
 		def deviceType = getDeviceType(it)
-		if(deviceType == "thermostat")
+		if (deviceType == "thermostat") {
-		{
+			deviceData << [name: it.displayName, id: it.id, deviceType: deviceType, manufacturer: it.getManufacturerName(), model: it.getModelName(), attributes: deviceAttributeList(it), locationMode: getLocationModeInfo()]
-			deviceData << [name: it.displayName, id: it.id, status:it.getStatus(), deviceType:deviceType, manufacturer:it.getManufacturerName(), model:it.getModelName(), attributes: deviceAttributeList(it), locationMode: getLocationModeInfo()]
+		} else {
-		}
+			deviceData << [name: it.displayName, id: it.id, deviceType: deviceType, manufacturer: it.getManufacturerName(), model: it.getModelName(), attributes: deviceAttributeList(it)]
-		else
-		{
-			deviceData << [name: it.displayName, id: it.id, status:it.getStatus(), deviceType:deviceType, manufacturer:it.getManufacturerName(), model:it.getModelName(), attributes: deviceAttributeList(it)]
 		}
 	}
 
@@ -247,13 +246,10 @@ def getDevice() {
 	def it = findDevice(params.id)
 	def deviceType = getDeviceType(it)
 	def device
-	if(deviceType == "thermostat")
+	if (deviceType == "thermostat") {
-	{
+		device = [name: it.displayName, id: it.id, deviceType: deviceType, manufacturer: it.getManufacturerName(), model: it.getModelName(), attributes: deviceAttributeList(it), locationMode: getLocationModeInfo()]
-		device = [name: it.displayName, id: it.id, status:it.getStatus(), deviceType:deviceType, manufacturer:it.getManufacturerName(), model:it.getModelName(), attributes: deviceAttributeList(it), locationMode: getLocationModeInfo()]
+	} else {
-	}
+		device = [name: it.displayName, id: it.id, deviceType: deviceType, manufacturer: it.getManufacturerName(), model: it.getModelName(), attributes: deviceAttributeList(it)]
-	else
-	{
-		device = [name: it.displayName, id: it.id, status:it.getStatus(), deviceType:deviceType, manufacturer:it.getManufacturerName(), model:it.getModelName(), attributes: deviceAttributeList(it)]
 	}
 	log.debug "getDevice, return: ${device}"
 	return device
@@ -265,18 +261,18 @@ void updateDevice() {
 	request.JSON.each {
 		def command = it.key
 		def value = it.value
-		if (command){
+		if (command) {
 			def commandList = mapDeviceCommands(command, value)
 			command = commandList[0]
 			value = commandList[1]
 
 			if (command == "setAwayMode") {
 				log.info "Setting away mode to ${value}"
-				if (location.modes?.find {it.name == value}) {
+				if (location.modes?.find { it.name == value }) {
 					location.setMode(value)
 				}
-			}else if (command == "thermostatSetpoint"){
+			} else if (command == "thermostatSetpoint") {
-				switch(device.currentThermostatMode){
+				switch (device.currentThermostatMode) {
 					case "cool":
 						log.info "Update: ${device.displayName}, [${command}, ${value}]"
 						device.setCoolingSetpoint(value)
@@ -290,7 +286,7 @@ void updateDevice() {
 						httpError(501, "this mode: ${device.currentThermostatMode} does not allow changing thermostat setpoint.")
 						break
 				}
-			}else if (!device) {
+			} else if (!device) {
 				log.error "updateDevice, Device not found"
 				httpError(404, "Device not found")
 			} else if (!device.hasCommand(command)) {
@@ -300,11 +296,11 @@ void updateDevice() {
 				if (command == "setColor") {
 					log.info "Update: ${device.displayName}, [${command}, ${value}]"
 					device."$command"(hex: value)
-				} else if(value.isNumber()) {
+				} else if (value.isNumber()) {
 					def intValue = value as Integer
 					log.info "Update: ${device.displayName}, [${command}, ${intValue}(int)]"
 					device."$command"(intValue)
-				} else if (value){
+				} else if (value) {
 					log.info "Update: ${device.displayName}, [${command}, ${value}]"
 					device."$command"(value)
 				} else {
@@ -326,28 +322,19 @@ private getLocationModeInfo() {
 //Map each device to a type given it's capabilities
 private getDeviceType(device) {
 	def deviceType
-	def capabilities = device.capabilities
+	def caps = device.capabilities
-	log.debug "capabilities: [${device}, ${capabilities}]"
+	log.debug "capabilities: [${device}, ${caps}]"
 	log.debug "supported commands: [${device}, ${device.supportedCommands}]"
-
+	caps.each {
-	//Loop through the device capability list to determine the device type.
+		switch (it.name.toLowerCase()) {
-	capabilities.each {capability ->
-		switch(capability.name.toLowerCase())
-		{
 			case "switch":
 				deviceType = "switch"
-
+				if (caps.any { it.name.toLowerCase() == "power meter" }) {
-				//If the device also contains "Switch Level" capability, identify it as a "light" device.
+					return deviceType
-				if (capabilities.any{it.name.toLowerCase() == "switch level"}){
+				}
-
+				if (caps.any { it.name.toLowerCase() == "switch level" }) {
-					//If the device also contains "Power Meter" capability, identify it as a "dimmerSwitch" device.
+					deviceType = "light"
-					if (capabilities.any{it.name.toLowerCase() == "power meter"}){
+					return deviceType
-						deviceType = "dimmerSwitch"
-						return deviceType
-					} else {
-						deviceType = "light"
-						return deviceType
-					}
 				}
 				break
 			case "contact sensor":
@@ -388,16 +375,16 @@ private findDevice(deviceId) {
 
 //Return a list of device attributes
 private deviceAttributeList(device) {
-	device.supportedAttributes.collectEntries { attribute->
+	device.supportedAttributes.collectEntries { attribute ->
 		try {
-			[ (attribute.name): device.currentValue(attribute.name) ]
+			[(attribute.name): device.currentValue(attribute.name)]
-		} catch(e) {
+		} catch (e) {
-			[ (attribute.name): null ]
+			[(attribute.name): null]
 		}
 	}
 }
 
-//Map device command and value. 
+//Map device command and value.
 //input command and value are from UWP,
 //returns resultCommand and resultValue that corresponds with function and value in SmartApps
 private mapDeviceCommands(command, value) {
@@ -427,7 +414,7 @@ private mapDeviceCommands(command, value) {
 			resultCommand = "setSaturation"
 			resultValue = value
 			break
-		case "colorTemperature":
+		case "ct":
 			resultCommand = "setColorTemperature"
 			resultValue = value
 			break
@@ -464,8 +451,7 @@ private mapDeviceCommands(command, value) {
 			if (value == 1 || value == "1" || value == "lock") {
 				resultCommand = "lock"
 				resultValue = ""
-			}
+			} else if (value == 0 || value == "0" || value == "unlock") {
-			else if (value == 0 || value == "0" || value == "unlock") {
 				resultCommand = "unlock"
 				resultValue = ""
 			}
@@ -474,5 +460,6 @@ private mapDeviceCommands(command, value) {
 			break
 	}
 
-	return [resultCommand,resultValue]
+	return [resultCommand, resultValue]
 }
+

smartapps/redloro-smartthings/yamaha-receiver.src/yamaha-receiver.groovy

@@ -0,0 +1,154 @@
+/**
+ *  SmartThings SmartApp: Yamaha Network Receiver
+ *
+ *  Author: redloro@gmail.com
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ *  https://github.com/PSeitz/yamaha-nodejs
+ *  http://<RECEIVER_IP_ADDRESS>/YamahaRemoteControl/desc.xml
+ */
+import groovy.util.XmlSlurper
+
+definition(
+  name: "Yamaha Receiver",
+  namespace: "redloro-smartthings",
+  author: "redloro@gmail.com",
+  description: "Yamaha SmartApp",
+  category: "My Apps",
+  iconUrl: "https://raw.githubusercontent.com/redloro/smartthings/master/images/yamaha-receiver.png",
+  iconX2Url: "https://raw.githubusercontent.com/redloro/smartthings/master/images/yamaha-receiver.png",
+  iconX3Url: "https://raw.githubusercontent.com/redloro/smartthings/master/images/yamaha-receiver.png"
+)
+
+preferences {
+  section("SmartThings Hub") {
+    input "hostHub", "hub", title: "Select Hub", multiple: false, required: true
+  }
+  section("Yamaha Receiver") {
+    input name: "receiverName", type: "text", title: "Name", required: true, defaultValue: "Yamaha"
+    input name: "receiverIp", type: "text", title: "IP", required: true
+    input name: "receiverZones", type: "enum", title: "Zones", required: true, multiple: true, options: ["Main_Zone","Zone_B","Zone_2","Zone_3","Zone_4"]
+  }
+}
+
+def installed() {
+  subscribeToEvents()
+}
+
+def subscribeToEvents() {
+  subscribe(location, null, lanResponseHandler, [filterEvents:false])
+}
+
+def updated() {
+  addChildDevices()
+}
+
+def uninstalled() {
+  removeChildDevices()
+}
+
+def lanResponseHandler(evt) {
+  def map = stringToMap(evt.stringValue)
+
+  //verify that this message is from Yamaha Receiver IP
+  if (!map.ip || map.ip != convertIPtoHex(settings.receiverIp)) {
+    return
+  }
+
+  def headers = getHttpHeaders(map.headers);
+  def body = getHttpBody(map.body);
+  //log.trace "Headers: ${headers}"
+  //log.trace "Body: ${body}"
+
+  updateZoneDevices(body.children()[0])
+}
+
+private updateZoneDevices(evt) {
+  //log.debug "updateZoneDevices: ${evt.toString()}"
+  if (evt.name() == "System") {
+    //log.debug "Update all zones"
+    childDevices*.zone(evt)
+    return
+  }
+
+  def zonedevice = getChildDevice(getDeviceId(evt.name()))
+  if (zonedevice) {
+    zonedevice.zone(evt)
+  }
+
+  //check for Zone_B
+  zonedevice = getChildDevice(getDeviceId("Zone_B"))
+  if (zonedevice && evt.name() == "Main_Zone") {
+    zonedevice.zone(evt)
+  }
+}
+
+private addChildDevices() {
+  // add yamaha device
+  settings.receiverZones.each {
+    def deviceId = getDeviceId(it)
+    if (!getChildDevice(deviceId)) {
+      addChildDevice("redloro-smartthings", "Yamaha Zone", deviceId, hostHub.id, ["name": it, label: "${settings.receiverName}: ${it}", completedSetup: true])
+      log.debug "Added Yamaha zone: ${deviceId}"
+    }
+  }
+
+  childDevices*.refresh()
+}
+
+private removeChildDevices() {
+  getAllChildDevices().each { deleteChildDevice(it.deviceNetworkId) }
+}
+
+private sendCommand(body) {
+  //log.debug "Yamaha Network Receiver send command: ${body}"
+
+  def hubAction = new physicalgraph.device.HubAction(
+      headers: [HOST: getReceiverAddress()],
+      method: "POST",
+      path: "/YamahaRemoteControl/ctrl",
+      body: body
+  )
+  sendHubCommand(hubAction)
+}
+
+private getHttpHeaders(headers) {
+  def obj = [:]
+  new String(headers.decodeBase64()).split("\r\n").each {param ->
+    def nameAndValue = param.split(":")
+    obj[nameAndValue[0]] = (nameAndValue.length == 1) ? "" : nameAndValue[1].trim()
+  }
+  return obj
+}
+
+private getHttpBody(body) {
+  def obj = null;
+  if (body) {
+    obj = new XmlSlurper().parseText(new String(body.decodeBase64()))
+  }
+  return obj
+}
+
+private getDeviceId(zone) {
+  return "yamaha|${settings.receiverIp}|${zone}"
+}
+
+private getReceiverAddress() {
+  return settings.receiverIp + ":80"
+}
+
+private String convertIPtoHex(ipAddress) {
+  return ipAddress.tokenize( '.' ).collect {  String.format( '%02x', it.toInteger() ) }.join().toUpperCase()
+}
+
+private String convertPortToHex(port) {
+  return port.toString().format( '%04x', port.toInteger() ).toUpperCase()
+}