Modifying 'Microsoft SmartApp 7/17 Publish'

DVCSMP-2570 Adding centralite zigbee button fingerprint

devicetypes/fibargroup/fibaro-door-window-sensor-zw5-with-temperature.src/fibaro-door-window-sensor-zw5-with-temperature.groovy

@@ -14,7 +14,7 @@
  *
  */
 metadata {
-	definition (name: "Fibaro Door/Window Sensor ZW5 with Temperature", namespace: "fibargroup", author: "Fibar Group S.A.") {
+	definition (name: "Fibaro Door/Window Sensor ZW5 with Temperature", namespace: "fibargroup", author: "Fibar Group S.A.", ocfDeviceType: "x.com.st.d.sensor.contact") {
 		capability "Battery"
 		capability "Contact Sensor"
 		capability "Sensor"

devicetypes/fibargroup/fibaro-door-window-sensor-zw5.src/fibaro-door-window-sensor-zw5.groovy

@@ -14,7 +14,7 @@
  *
  */
 metadata {
-	definition (name: "Fibaro Door/Window Sensor ZW5", namespace: "fibargroup", author: "Fibar Group S.A.") {
+	definition (name: "Fibaro Door/Window Sensor ZW5", namespace: "fibargroup", author: "Fibar Group S.A.", ocfDeviceType: "x.com.st.d.sensor.contact") {
 		capability "Battery"
 		capability "Contact Sensor"
 		capability "Sensor"

devicetypes/fibargroup/fibaro-flood-sensor-zw5.src/fibaro-flood-sensor-zw5.groovy

@@ -14,7 +14,7 @@
  *
  */
 metadata {
-	definition (name: "Fibaro Flood Sensor ZW5", namespace: "fibargroup", author: "Fibar Group S.A.") {
+	definition (name: "Fibaro Flood Sensor ZW5", namespace: "fibargroup", author: "Fibar Group S.A.", ocfDeviceType: "x.com.st.d.sensor.moisture") {
 		capability "Battery"
 		capability "Configuration"
 		capability "Sensor"

devicetypes/fibargroup/fibaro-motion-sensor-zw5.src/fibaro-motion-sensor-zw5.groovy

@@ -14,7 +14,7 @@
  *
  */
 metadata {
-	definition (name: "Fibaro Motion Sensor ZW5", namespace: "fibargroup", author: "Fibar Group S.A.") {
+	definition (name: "Fibaro Motion Sensor ZW5", namespace: "fibargroup", author: "Fibar Group S.A.", ocfDeviceType: "x.com.st.d.sensor.motion") {
 		capability "Battery"
 		capability "Configuration"
 		capability "Illuminance Measurement"

devicetypes/smartthings/aeon-multisensor-gen5.src/aeon-multisensor-gen5.groovy

@@ -100,6 +100,11 @@ metadata {
 	}
 }
 
+def installed(){
+// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated(){
 // Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

devicetypes/smartthings/aeon-siren.src/aeon-siren.groovy

@@ -58,6 +58,11 @@ metadata {
  }
 }
 
+def installed() {
+// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated() {
 // Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

devicetypes/smartthings/cree-bulb.src/cree-bulb.groovy

@@ -15,7 +15,7 @@
  */
 
 metadata {
-    definition (name: "Cree Bulb", namespace: "smartthings", author: "SmartThings") {
+    definition (name: "Cree Bulb", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
 
         capability "Actuator"
         capability "Configuration"

devicetypes/smartthings/dimmer-switch.src/dimmer-switch.groovy

@@ -84,6 +84,11 @@ metadata {
 	}
 }
 
+def installed() {
+	// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated(){
 	// Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

devicetypes/smartthings/econet-vent.src/econet-vent.groovy

@@ -85,6 +85,11 @@ def parse(String description) {
     result
 }
 
+def installed() {
+	// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 //send the command to stop polling
 def updated() {
 	// Device-Watch simply pings if no device events received for 32min(checkInterval)

devicetypes/smartthings/everspring-flood-sensor.src/everspring-flood-sensor.groovy

@@ -12,7 +12,7 @@
  *
  */
 metadata {
-	definition (name: "Everspring Flood Sensor", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Everspring Flood Sensor", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "x.com.st.d.sensor.moisture") {
 		capability "Water Sensor"
 		capability "Configuration"
 		capability "Sensor"

devicetypes/smartthings/fibaro-motion-sensor.src/fibaro-motion-sensor.groovy

@@ -38,7 +38,7 @@
  * @return none
  */
  metadata {
-	definition (name: "Fibaro Motion Sensor", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Fibaro Motion Sensor", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "x.com.st.d.sensor.motion") {
 		capability 	"Motion Sensor"
 		capability 	"Temperature Measurement"
 		capability 	"Acceleration Sensor"
@@ -436,4 +436,3 @@ def listCurrentParams() {
 
 	delayBetween(cmds, 500)
 }
-

devicetypes/smartthings/fortrezz-water-valve.src/fortrezz-water-valve.groovy

@@ -50,6 +50,11 @@ metadata {
 	}
 }
 
+def installed(){
+// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated(){
 // Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

devicetypes/smartthings/ge-link-bulb.src/ge-link-bulb.groovy

@@ -42,7 +42,7 @@
  */
 
 metadata {
-    definition (name: "GE Link Bulb", namespace: "smartthings", author: "SmartThings") {
+    definition (name: "GE Link Bulb", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
 
         capability "Actuator"
         capability "Configuration"

devicetypes/smartthings/hue-bloom.src/hue-bloom.groovy

@@ -57,10 +57,20 @@ metadata {
 	}
 }
 
-void installed() {
+def initialize() {
 	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}", displayed: false)
 }
 
+void installed() {
+	log.debug "installed()"
+	initialize()
+}
+
+def updated() {
+	log.debug "updated()"
+	initialize()
+}
+
 // parse events into attributes
 def parse(description) {
 	log.debug "parse() - $description"

devicetypes/smartthings/hue-bridge.src/hue-bridge.groovy

@@ -45,10 +45,20 @@ metadata {
 	}
 }
 
-void installed() {
+def initialize() {
 	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}", displayed: false)
 }
 
+void installed() {
+	log.debug "installed()"
+	initialize()
+}
+
+def updated() {
+	log.debug "updated()"
+	initialize()
+}
+
 // parse events into attributes
 def parse(description) {
 	log.debug "Parsing '${description}'"

devicetypes/smartthings/hue-bulb.src/hue-bulb.groovy

@@ -66,10 +66,20 @@ metadata {
 	}
 }
 
-void installed() {
+def initialize() {
 	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}", displayed: false)
 }
 
+void installed() {
+	log.debug "installed()"
+	initialize()
+}
+
+def updated() {
+	log.debug "updated()"
+	initialize()
+}
+
 // parse events into attributes
 def parse(description) {
 	log.debug "parse() - $description"

devicetypes/smartthings/hue-lux-bulb.src/hue-lux-bulb.groovy

@@ -50,10 +50,19 @@ metadata {
     }
 }
 
-void installed() {
+def initialize() {
 	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}", displayed: false)
 }
 
+void installed() {
+	log.debug "installed()"
+	initialize()
+}
+
+def updated() {
+	initialize()
+}
+
 // parse events into attributes
 def parse(description) {
 	log.debug "parse() - $description"

devicetypes/smartthings/hue-white-ambiance-bulb.src/hue-white-ambiance-bulb.groovy

@@ -55,10 +55,20 @@ metadata {
     }
 }
 
-void installed() {
+def initialize() {
 	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}", displayed: false)
 }
 
+void installed() {
+    log.debug "installed()"
+    initialize()
+}
+
+def updated() {
+    log.debug "updated()"
+    initialize()
+}
+
 // parse events into attributes
 def parse(description) {
     log.debug "parse() - $description"

devicetypes/smartthings/lifx-color-bulb.src/lifx-color-bulb.groovy

@@ -5,7 +5,7 @@
  *
  */
 metadata {
-	definition (name: "LIFX Color Bulb", namespace: "smartthings", author: "LIFX") {
+	definition (name: "LIFX Color Bulb", namespace: "smartthings", author: "LIFX", ocfDeviceType: "oic.d.light") {
 		capability "Actuator"
 		capability "Color Control"
 		capability "Color Temperature"
@@ -64,8 +64,18 @@ metadata {
 	}
 }
 
+def initialize() {
+	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"cloud\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device?.hub?.hardwareID}\"}", displayed: false)
+}
+
 void installed() {
-	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"cloud\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device?.hub?.hardwareID}\"}")
+	log.debug "installed()"
+	initialize()
+}
+
+def updated() {
+	log.debug "updated()"
+	initialize()
 }
 
 // handle commands

devicetypes/smartthings/lifx-white-bulb.src/lifx-white-bulb.groovy

@@ -5,7 +5,7 @@
  *
  */
 metadata {
-	definition (name: "LIFX White Bulb", namespace: "smartthings", author: "LIFX") {
+	definition (name: "LIFX White Bulb", namespace: "smartthings", author: "LIFX", ocfDeviceType: "oic.d.light") {
 		capability "Actuator"
 		capability "Color Temperature"
 		capability "Switch"
@@ -55,8 +55,18 @@ metadata {
 	}
 }
 
+def initialize() {
+	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"cloud\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device?.hub?.hardwareID}\"}", displayed: false)
+}
+
 void installed() {
-	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"cloud\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device?.hub?.hardwareID}\"}")
+	log.debug "installed()"
+	initialize()
+}
+
+def updated() {
+	log.debug "updated()"
+	initialize()
 }
 
 // handle commands

devicetypes/smartthings/logitech-harmony-hub-c2c.src/logitech-harmony-hub-c2c.groovy

@@ -1,3 +1,4 @@
+import groovy.json.JsonOutput
 /**
  *  Logitech Harmony Hub
  *
@@ -39,14 +40,18 @@ metadata {
 	}
 }
 
+def initialize() {
+	sendEvent(name: "DeviceWatch-Enroll", value: JsonOutput.toJson([protocol: "cloud", scheme:"untracked"]), displayed: false)
+}
+
 def installed() {
 	log.debug "installed()"
-	sendEvent(name: "DeviceWatch-Enroll", value: JsonOutput.toJson([protocol: "cloud", scheme:"untracked"]), displayed: false)
+	initialize()
 }
 
 def updated() {
 	log.debug "updated()"
-	sendEvent(name: "DeviceWatch-Enroll", value: JsonOutput.toJson([protocol: "cloud", scheme:"untracked"]), displayed: false)
+	initialize()
 }
 
 def startActivity(String activityId) {

devicetypes/smartthings/open-closed-sensor.src/open-closed-sensor.groovy

@@ -12,7 +12,7 @@
  *
  */
 metadata {
-	definition (name: "Open/Closed Sensor", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Open/Closed Sensor", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "x.com.st.d.sensor.contact") {
 		capability "Contact Sensor"
 		capability "Sensor"
 

devicetypes/smartthings/rgbw-light.src/rgbw-light.groovy

@@ -17,7 +17,7 @@
  */
 
 metadata {
-	definition (name: "RGBW Light", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "RGBW Light", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
 		capability "Switch Level"
 		capability "Color Control"
 		capability "Color Temperature"

devicetypes/smartthings/smartsense-moisture.src/smartsense-moisture.groovy

@@ -91,6 +91,11 @@ def parse(String description) {
 	return result
 }
 
+def installed() {
+	// Device-Watch simply pings if no device events received for 482min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 4 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated() {
 	// Device-Watch simply pings if no device events received for 482min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 4 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

devicetypes/smartthings/sylvania-ultra-iq.src/sylvania-ultra-iq.groovy

@@ -15,7 +15,7 @@
 //DEPRECATED - Using the generic DTH for this device. Users need to be moved before deleting this DTH
 
 metadata {
-	definition (name: "Sylvania Ultra iQ", namespace:"smartthings", author: "SmartThings") {
+	definition (name: "Sylvania Ultra iQ", namespace:"smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
 		capability "Switch Level"
 		capability "Configuration"
 		capability "Switch"

devicetypes/smartthings/wemo-bulb.src/wemo-bulb.groovy

@@ -18,7 +18,7 @@
 //DEPRECATED - Using the generic DTH for this device. Users need to be moved before deleting this DTH
 
 metadata {
-	definition (name: "WeMo Bulb", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "WeMo Bulb", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
 
     	capability "Actuator"
         capability "Configuration"

devicetypes/smartthings/zigbee-button.src/zigbee-button.groovy

@@ -28,6 +28,7 @@ metadata {
         command "enrollResponse"
 
         fingerprint inClusters: "0000, 0001, 0003, 0020, 0402, 0B05", outClusters: "0003, 0006, 0008, 0019", manufacturer: "OSRAM", model: "LIGHTIFY Dimming Switch", deviceJoinName: "OSRAM LIGHTIFY Dimming Switch"
+        fingerprint inClusters: "0000, 0001, 0003, 0020, 0402, 0B05", outClusters: "0003, 0006, 0008, 0019", manufacturer: "CentraLite", model: "3130", deviceJoinName: "Centralite Zigbee Smart Switch"
         //fingerprint inClusters: "0000, 0001, 0003, 0020, 0500", outClusters: "0003,0019", manufacturer: "CentraLite", model: "3455-L", deviceJoinName: "Iris Care Pendant"
         fingerprint inClusters: "0000, 0001, 0003, 0007, 0020, 0402, 0B05", outClusters: "0003, 0006, 0019", manufacturer: "CentraLite", model: "3460-L", deviceJoinName: "Iris Smart Button"
         fingerprint inClusters: "0000, 0001, 0003, 0007, 0020, 0B05", outClusters: "0003, 0006, 0019", manufacturer: "CentraLite", model:"3450-L", deviceJoinName: "Iris KeyFob"
@@ -251,12 +252,19 @@ def initialize() {
     if ((device.getDataValue("manufacturer") == "OSRAM") && (device.getDataValue("model") == "LIGHTIFY Dimming Switch")) {
         sendEvent(name: "numberOfButtons", value: 2)
     }
-    else if ((device.getDataValue("manufacturer") == "CentraLite") &&
+    else if (device.getDataValue("manufacturer") == "CentraLite") {
-            ((device.getDataValue("model") == "3455-L") || (device.getDataValue("model") == "3460-L"))) {
+        if (device.getDataValue("model") == "3130") {
-        sendEvent(name: "numberOfButtons", value: 1)
+            sendEvent(name: "numberOfButtons", value: 2)
-    }
+        }
-    else if ((device.getDataValue("manufacturer") == "CentraLite") && (device.getDataValue("model") == "3450-L")) {
+        else if ((device.getDataValue("model") == "3455-L") || (device.getDataValue("model") == "3460-L")) {
-        sendEvent(name: "numberOfButtons", value: 4)
+            sendEvent(name: "numberOfButtons", value: 1)
+        }
+        else if (device.getDataValue("model") == "3450-L") {
+            sendEvent(name: "numberOfButtons", value: 4)
+        }
+        else {
+            sendEvent(name: "numberOfButtons", value: 4)    //default case. can be changed later.
+        }
     }
     else {
         //default. can be changed

devicetypes/smartthings/zigbee-dimmer-power.src/zigbee-dimmer-power.groovy

@@ -13,7 +13,7 @@
  */
 
 metadata {
-    definition (name: "ZigBee Dimmer Power", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.switch") {
+    definition (name: "ZigBee Dimmer Power", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
         capability "Actuator"
         capability "Configuration"
         capability "Refresh"

devicetypes/smartthings/zigbee-dimmer.src/zigbee-dimmer.groovy

@@ -13,7 +13,7 @@
  */
 
 metadata {
-    definition (name: "ZigBee Dimmer", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.switch") {
+    definition (name: "ZigBee Dimmer", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
         capability "Actuator"
         capability "Configuration"
         capability "Refresh"

devicetypes/smartthings/zll-dimmer-bulb.src/zll-dimmer-bulb.groovy

@@ -16,7 +16,7 @@ import groovy.transform.Field
 @Field Boolean hasConfiguredHealthCheck = false
 
 metadata {
-    definition (name: "ZLL Dimmer Bulb", namespace: "smartthings", author: "SmartThings") {
+    definition (name: "ZLL Dimmer Bulb", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
 
         capability "Actuator"
         capability "Configuration"

devicetypes/smartthings/zll-rgb-bulb.src/zll-rgb-bulb.groovy

@@ -14,7 +14,7 @@
 import physicalgraph.zigbee.zcl.DataType
 
 metadata {
-	definition (name: "ZLL RGB Bulb", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "ZLL RGB Bulb", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
 
 		capability "Actuator"
 		capability "Color Control"

devicetypes/smartthings/zll-rgbw-bulb.src/zll-rgbw-bulb.groovy

@@ -14,7 +14,7 @@
 import physicalgraph.zigbee.zcl.DataType
 
 metadata {
-    definition (name: "ZLL RGBW Bulb", namespace: "smartthings", author: "SmartThings") {
+    definition (name: "ZLL RGBW Bulb", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
 
         capability "Actuator"
         capability "Color Control"

devicetypes/smartthings/zll-white-color-temperature-bulb-5000k.src/zll-white-color-temperature-bulb-5000k.groovy

@@ -16,7 +16,7 @@ import groovy.transform.Field
 @Field Boolean hasConfiguredHealthCheck = false
 
 metadata {
-    definition (name: "ZLL White Color Temperature Bulb 5000K", namespace: "smartthings", author: "SmartThings") {
+    definition (name: "ZLL White Color Temperature Bulb 5000K", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
 
         capability "Actuator"
         capability "Color Temperature"

devicetypes/smartthings/zll-white-color-temperature-bulb.src/zll-white-color-temperature-bulb.groovy

@@ -16,7 +16,7 @@ import groovy.transform.Field
 @Field Boolean hasConfiguredHealthCheck = false
 
 metadata {
-    definition (name: "ZLL White Color Temperature Bulb", namespace: "smartthings", author: "SmartThings") {
+    definition (name: "ZLL White Color Temperature Bulb", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
 
         capability "Actuator"
         capability "Color Temperature"

devicetypes/smartthings/zwave-dimmer-switch-generic.src/zwave-dimmer-switch-generic.groovy

@@ -12,7 +12,7 @@
  *
  */
 metadata {
-	definition (name: "Z-Wave Dimmer Switch Generic", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.switch") {
+	definition (name: "Z-Wave Dimmer Switch Generic", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
 		capability "Switch Level"
 		capability "Actuator"
 		capability "Health Check"
@@ -78,6 +78,11 @@ metadata {
 	}
 }
 
+def installed(){
+// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated(){
 // Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

devicetypes/smartthings/zwave-door-window-sensor.src/zwave-door-window-sensor.groovy

@@ -17,7 +17,7 @@
  */
 
 metadata {
-	definition (name: "Z-Wave Door/Window Sensor", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Z-Wave Door/Window Sensor", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "x.com.st.d.sensor.contact") {
 		capability "Contact Sensor"
 		capability "Sensor"
 		capability "Battery"
@@ -79,6 +79,11 @@ def parse(String description) {
 	return result
 }
 
+def installed() {
+	// Device-Watch simply pings if no device events received for 482min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 4 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated() {
 	// Device-Watch simply pings if no device events received for 482min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 4 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

devicetypes/smartthings/zwave-garage-door-opener.src/zwave-garage-door-opener.groovy

@@ -65,6 +65,11 @@ metadata {
 
 import physicalgraph.zwave.commands.barrieroperatorv1.*
 
+def installed(){
+// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated(){
 // Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

devicetypes/smartthings/zwave-lock.src/zwave-lock.groovy

@@ -68,6 +68,11 @@ metadata {
 import physicalgraph.zwave.commands.doorlockv1.*
 import physicalgraph.zwave.commands.usercodev1.*
 
+def installed() {
+	// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated() {
 	// Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

devicetypes/smartthings/zwave-metering-dimmer.src/zwave-metering-dimmer.groovy

@@ -100,6 +100,11 @@ def parse(String description) {
     result
 }
 
+def installed() {
+	// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated() {
 	// Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

devicetypes/smartthings/zwave-metering-switch.src/zwave-metering-switch.groovy

@@ -74,6 +74,11 @@ metadata {
 	}
 }
 
+def installed() {
+	// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated() {
 	// Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

devicetypes/smartthings/zwave-motion-sensor.src/zwave-motion-sensor.groovy

@@ -17,7 +17,7 @@
  */
 
 metadata {
-	definition (name: "Z-Wave Motion Sensor", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Z-Wave Motion Sensor", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "x.com.st.d.sensor.motion") {
 		capability "Motion Sensor"
 		capability "Sensor"
 		capability "Battery"
@@ -51,7 +51,12 @@ metadata {
 	}
 }
 
-def updated(){
+def installed() {
+// Device wakes up every 4 hours, this interval allows us to miss one wakeup notification before marking offline
+	sendEvent(name: "checkInterval", value: 8 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
+def updated() {
 // Device wakes up every 4 hours, this interval allows us to miss one wakeup notification before marking offline
 	sendEvent(name: "checkInterval", value: 8 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 }

devicetypes/smartthings/zwave-plus-door-window-sensor.src/zwave-plus-door-window-sensor.groovy

@@ -16,7 +16,7 @@
 */
 
 metadata {
-	definition (name: "Z-Wave Plus Door/Window Sensor", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Z-Wave Plus Door/Window Sensor", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "x.com.st.d.sensor.contact") {
 		capability "Contact Sensor"
 		capability "Configuration"
 		capability "Battery"

devicetypes/smartthings/zwave-siren.src/.st-ignore

@@ -1,2 +0,0 @@
-.st-ignore
-README.md

devicetypes/smartthings/zwave-siren.src/README.md

@@ -1,42 +0,0 @@
-# Z-wave Siren
-
-Cloud Execution
-
-Works with: 
-
-* [FortrezZ Siren Strobe Alarm](https://www.smartthings.com/works-with-smartthings/other/fortrezz-water-valve)
-
-## Table of contents
-
-* [Capabilities](#capabilities)
-* [Health](#device-health)
-* [Troubleshooting](#troubleshooting)
-
-## Capabilities
-
-* **Actuator** - represents that a Device has commands
-* **Alarm** - allows for interacting with devices that serve as alarms
-* **Battery** - defines device uses a battery
-* **Health Check** - indicates ability to get device health notifications
-* **Polling** - represents that poll() can be implemented for the device
-* **Refresh** - _refresh()_ command for status updates
-* **Sensor** - detects sensor events
-* **Switch** - can detect state (possible values: on/off)
-
-## Device Health
-
-FortrezZ Siren Strobe Alarm is polled by the hub.
-As of hubCore version 0.14.38 the hub sends up reports every 15 minutes regardless of whether the state changed.
-Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*15 + 2)mins = 32 mins.
-Not to mention after going OFFLINE when the device is plugged back in, it might take a considerable amount of time for
-the device to appear as ONLINE again. This is because if this listening device does not respond to two poll requests in a row,
-it is not polled for 5 minutes by the hub. This can delay up the process of being marked ONLINE by quite some time.
-
-* __32min__ checkInterval
-
-## Troubleshooting
-
-If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
-Pairing needs to be tried again by placing the device closer to the hub.
-Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
-* [FortrezZ Siren Strobe Alarm Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/202294760-FortrezZ-Siren-Strobe-Alarm)

devicetypes/smartthings/zwave-siren.src/zwave-siren.groovy

@@ -20,7 +20,6 @@ metadata {
 		capability "Actuator"
         capability "Alarm"
         capability "Battery"
-		capability "Health Check"
         capability "Polling"
         capability "Refresh"
         capability "Sensor"
@@ -28,7 +27,6 @@ metadata {
 
 
 		fingerprint inClusters: "0x20,0x25,0x86,0x80,0x85,0x72,0x71"
-		fingerprint mfr:"0084", prod:"0313", model:"010B", deviceJoinName: "FortrezZ Siren Strobe Alarm"
 	}
 
 	simulator {
@@ -60,11 +58,6 @@ metadata {
 	}
 }
 
-def updated(){
-// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-}
-
 def createEvents(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
 	def map = [ name: "battery", unit: "%" ]
 	if (cmd.batteryLevel == 0xFF) {
@@ -126,13 +119,6 @@ def both() {
 	on()
 }
 
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-	refresh()
-}
-
 def refresh() {
 	log.debug "sending battery refresh command"
 	zwave.batteryV1.batteryGet().format()

devicetypes/smartthings/zwave-smoke-alarm.src/zwave-smoke-alarm.groovy

@@ -53,7 +53,12 @@ metadata {
 	}
 }
 
-def updated(){
+def installed() {
+// Device checks in every hour, this interval allows us to miss one check-in notification before marking offline
+	sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
+def updated() {
 // Device checks in every hour, this interval allows us to miss one check-in notification before marking offline
 	sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 }

devicetypes/smartthings/zwave-switch-generic.src/zwave-switch-generic.groovy

@@ -61,6 +61,11 @@ metadata {
 	}
 }
 
+def installed(){
+// Device-Watch simply pings if no device events received for checkInterval duration of 32min = 2 * 15min + 2min lag time
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated(){
 // Device-Watch simply pings if no device events received for checkInterval duration of 32min = 2 * 15min + 2min lag time
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

devicetypes/smartthings/zwave-switch.src/zwave-switch.groovy

@@ -65,6 +65,11 @@ metadata {
 	}
 }
 
+def installed() {
+	// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated(){
 		// Device-Watch simply pings if no device events received for 32min(checkInterval)
 		sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

devicetypes/smartthings/zwave-thermostat.src/zwave-thermostat.groovy

@@ -124,6 +124,11 @@ metadata {
 	}
 }
 
+def installed(){
+	// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated(){
 	// Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

devicetypes/smartthings/zwave-virtual-momentary-contact-switch.src/zwave-virtual-momentary-contact-switch.groovy

@@ -16,7 +16,7 @@
  *  Date: 2013-03-07
  */
 metadata {
-	definition (name: "Z-Wave Virtual Momentary Contact Switch", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Z-Wave Virtual Momentary Contact Switch", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "x.com.st.d.sensor.contact") {
 		capability "Actuator"
 		capability "Switch"
 		capability "Refresh"

devicetypes/smartthings/zwave-water-sensor.src/zwave-water-sensor.groovy

@@ -17,7 +17,7 @@
  */
 
 metadata {
-	definition (name: "Z-Wave Water Sensor", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Z-Wave Water Sensor", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "x.com.st.d.sensor.moisture") {
 		capability "Water Sensor"
 		capability "Sensor"
 		capability "Battery"

smartapps/opent2t/opent2t-smartapp-test-alpha.src/opent2t-smartapp-test-alpha.groovy

@@ -0,0 +1,649 @@
+import javax.crypto.Mac;
+import javax.crypto.spec.SecretKeySpec;
+import java.security.InvalidKeyException;
+
+definition(
+    name: "OpenT2T SmartApp Test",
+		namespace: "opent2t",
+		author: "Microsoft",
+		description: "SmartApp for end to end SmartThings scenarios via OpenT2T",
+		category: "SmartThings Labs",
+		iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
+		iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
+		iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png")
+
+/** --------------------+---------------+-----------------------+------------------------------------
+ *  Device Type         | Attribute Name| Commands              | Attribute Values
+ *  --------------------+---------------+-----------------------+------------------------------------
+ *  switches            | switch        | on, off               | on, off
+ *  motionSensors       | motion        |                       | active, inactive
+ *  contactSensors      | contact       |                       | open, closed
+ *  presenceSensors     | presence      |                       | present, 'not present'
+ *  temperatureSensors  | temperature   |                       | <numeric, F or C according to unit>
+ *  accelerationSensors | acceleration  |                       | active, inactive
+ *  waterSensors        | water         |                       | wet, dry
+ *  lightSensors        | illuminance   |                       | <numeric, lux>
+ *  humiditySensors     | humidity      |                       | <numeric, percent>
+ *  locks               | lock          | lock, unlock          | locked, unlocked
+ *  garageDoors         | door          | open, close           | unknown, closed, open, closing, opening
+ *  cameras             | image         | take                  | <String>
+ *  thermostats         | thermostat    | setHeatingSetpoint,   | temperature, heatingSetpoint, coolingSetpoint,
+ *                      |               | setCoolingSetpoint,   | thermostatSetpoint, thermostatMode,
+ *                      |               | off, heat, cool, auto,| thermostatFanMode, thermostatOperatingState
+ *                      |               | emergencyHeat,        |
+ *                      |               | setThermostatMode,    |
+ *                      |               | fanOn, fanAuto,       |
+ *                      |               | fanCirculate,         |
+ *                      |               | setThermostatFanMode  |
+ *  --------------------+---------------+-----------------------+------------------------------------
+ */
+
+//Device Inputs
+preferences {
+	section("Allow Microsoft to control these things...") {
+//		input "contactSensors", "capability.contactSensor", title: "Which Contact Sensors", multiple: true, required: false, hideWhenEmpty: true
+//		input "garageDoors", "capability.garageDoorControl", title: "Which Garage Doors?", multiple: true, required: false, hideWhenEmpty: true
+//		input "locks", "capability.lock", title: "Which Locks?", multiple: true, required: false, hideWhenEmpty: true
+//		input "cameras", "capability.videoCapture", title: "Which Cameras?",  multiple: true, required: false, hideWhenEmpty: true
+//		input "motionSensors", "capability.motionSensor", title: "Which Motion Sensors?", multiple: true, required: false, hideWhenEmpty: true
+//		input "presenceSensors", "capability.presenceSensor", title: "Which Presence Sensors", multiple: true, required: false, hideWhenEmpty: true
+		input "switches", "capability.switch", title: "Which Switches and Lights?", multiple: true, required: false, hideWhenEmpty: true
+		input "thermostats", "capability.thermostat", title: "Which Thermostat?", multiple: true, required: false, hideWhenEmpty: true
+//		input "waterSensors", "capability.waterSensor", title: "Which Water Leak Sensors?", multiple: true, required: false, hideWhenEmpty: true
+	}
+}
+
+def getInputs() {
+	def inputList = []
+	inputList += contactSensors?: []
+	inputList += garageDoors?: []
+	inputList += locks?: []
+	inputList += cameras?: []
+	inputList += motionSensors?: []
+	inputList += presenceSensors?: []
+	inputList += switches?: []
+	inputList += thermostats?: []
+	inputList += waterSensors?: []
+    return inputList
+}
+
+
+//API external Endpoints
+mappings {
+	path("/devices") {
+		action: [
+			GET: "getDevices"
+		]
+	}
+	path("/devices/:id") {
+		action: [
+			GET: "getDevice"
+		]
+	}
+	path("/update/:id") {
+		action: [
+		  PUT: "updateDevice"
+		]
+	}
+	path("/deviceSubscription") {
+		action: [
+		  POST: "registerDeviceChange",
+		  DELETE: "unregisterDeviceChange"
+		]
+	}
+    path("/locationSubscription") {
+		action: [
+		  POST: "registerDeviceGraph",
+		  DELETE: "unregisterDeviceGraph"
+		]
+	}
+}
+
+def installed() {
+	log.debug "Installing with settings: ${settings}"
+	initialize()
+}
+
+def updated() {
+	log.debug "Updating with settings: ${settings}"
+	
+    //Initialize state variables if didn't exist.
+    if( state.deviceSubscriptionMap == null ){
+		state.deviceSubscriptionMap = [:]
+		log.debug "deviceSubscriptionMap created."
+	}
+    if( state.locationSubscriptionMap == null ){
+		state.locationSubscriptionMap = [:]
+		log.debug "locationSubscriptionMap created."
+	}
+    if(state.verificationKeyMap == null){
+    	state.verificationKeyMap = [:]
+		log.debug "verificationKeyMap created."
+    }
+    
+	unsubscribe()
+	registerAllDeviceSubscriptions()
+}
+
+def initialize() {
+	log.debug "Initializing with settings: ${settings}"
+	state.deviceSubscriptionMap = [:]
+	log.debug "deviceSubscriptionMap created."
+    state.locationSubscriptionMap = [:]
+	log.debug "locationSubscriptionMap created."
+    state.verificationKeyMap = [:]
+	log.debug "verificationKeyMap created."
+    registerAllDeviceSubscriptions()
+}
+
+/*** Subscription Functions  ***/
+
+//Subscribe events for all devices
+def registerAllDeviceSubscriptions() {
+	registerChangeHandler(inputs)
+}
+
+//Subscribe to events from a list of devices
+def registerChangeHandler(myList) {
+	myList.each { myDevice ->
+		def theAtts = myDevice.supportedAttributes
+		theAtts.each {att ->
+			subscribe(myDevice, att.name, deviceEventHandler)
+			log.info "Registering for ${myDevice.displayName}.${att.name}"
+		}
+	}
+}
+
+//Endpoints function: Subscribe to events from a specific device
+def registerDeviceChange() {
+	def subscriptionEndpt = params.subscriptionURL
+	def deviceId = params.deviceId
+   	def myDevice = findDevice(deviceId)
+    
+	if( myDevice == null ){
+		httpError(404, "Cannot find device with device ID ${deviceId}.")
+	}
+    
+	def theAtts = myDevice.supportedAttributes
+	try {
+		theAtts.each {att ->
+			subscribe(myDevice, att.name, deviceEventHandler)
+		}
+        log.info "Subscribing for ${myDevice.displayName}"
+
+        if(subscriptionEndpt != null){
+			if(state.deviceSubscriptionMap[deviceId] == null){
+				state.deviceSubscriptionMap.put(deviceId, [subscriptionEndpt])
+				log.info "Added subscription URL: ${subscriptionEndpt} for ${myDevice.displayName}"
+			} else if (!state.deviceSubscriptionMap[deviceId].contains(subscriptionEndpt)){
+				// state.deviceSubscriptionMap[deviceId] << subscriptionEndpt
+                // For now, we will only have one subscription endpoint per device
+				state.deviceSubscriptionMap.remove(deviceId)
+				state.deviceSubscriptionMap.put(deviceId, [subscriptionEndpt])
+				log.info "Added subscription URL: ${subscriptionEndpt} for ${myDevice.displayName}"
+			}
+            
+            if(params.key != null){
+            	state.verificationKeyMap[subscriptionEndpt] = params.key
+				log.info "Added verification key: ${params.key} for ${subscriptionEndpt}"
+            }
+        }
+	} catch (e) {
+		httpError(500, "something went wrong: $e")
+	}
+
+	log.info "Current subscription map is ${state.deviceSubscriptionMap}"
+    log.info "Current verification key map is ${state.verificationKeyMap}"
+	return ["succeed"]
+}
+
+//Endpoints function: Unsubscribe to events from a specific device
+def unregisterDeviceChange() {
+	def subscriptionEndpt = params.subscriptionURL
+	def deviceId = params.deviceId
+	def myDevice = findDevice(deviceId)
+    
+	if( myDevice == null ){
+		httpError(404, "Cannot find device with device ID ${deviceId}.")
+	}
+    
+	try {
+		if(subscriptionEndpt != null && subscriptionEndpt != "undefined"){
+			if (state.deviceSubscriptionMap[deviceId]?.contains(subscriptionEndpt)){
+				if(state.deviceSubscriptionMap[deviceId].size() == 1){
+					state.deviceSubscriptionMap.remove(deviceId)
+				} else {
+					state.deviceSubscriptionMap[deviceId].remove(subscriptionEndpt)
+				}
+                state.verificationKeyMap.remove(subscriptionEndpt)
+				log.info "Removed subscription URL: ${subscriptionEndpt} for ${myDevice.displayName}"
+			}
+        } else {
+			state.deviceSubscriptionMap.remove(deviceId)
+			log.info "Unsubscriping for ${myDevice.displayName}"
+		}
+	} catch (e) {
+		httpError(500, "something went wrong: $e")
+	}
+
+	log.info "Current subscription map is ${state.deviceSubscriptionMap}"
+    log.info "Current verification key map is ${state.verificationKeyMap}"
+}
+
+//Endpoints function: Subscribe to device additiona/removal updated in a location
+def registerDeviceGraph() {
+	def subscriptionEndpt = params.subscriptionURL
+    
+    if (subscriptionEndpt != null && subscriptionEndpt != "undefined"){
+        subscribe(location, "DeviceCreated", locationEventHandler, [filterEvents: false])
+        subscribe(location, "DeviceUpdated", locationEventHandler, [filterEvents: false])
+        subscribe(location, "DeviceDeleted", locationEventHandler, [filterEvents: false])
+
+    	if(state.locationSubscriptionMap[location.id] == null){
+            state.locationSubscriptionMap.put(location.id, [subscriptionEndpt])
+			log.info "Added subscription URL: ${subscriptionEndpt} for Location ${location.name}"
+        }else if (!state.locationSubscriptionMap[location.id].contains(subscriptionEndpt)){
+            state.locationSubscriptionMap[location.id] << subscriptionEndpt
+			log.info "Added subscription URL: ${subscriptionEndpt} for Location ${location.name}"
+        }
+        
+        if(params.key != null){
+            state.verificationKeyMap[subscriptionEndpt] = params.key
+			log.info "Added verification key: ${params.key} for ${subscriptionEndpt}"
+        }
+        
+        log.info "Current location subscription map is ${state.locationSubscriptionMap}"
+        log.info "Current verification key map is ${state.verificationKeyMap}"
+        return ["succeed"]
+    } else {
+        httpError(400, "missing input parameter: subscriptionURL")
+    }
+}
+
+//Endpoints function: Unsubscribe to events from a specific device
+def unregisterDeviceGraph() {
+	def subscriptionEndpt = params.subscriptionURL
+    
+	try {
+		if(subscriptionEndpt != null && subscriptionEndpt != "undefined"){
+			if (state.locationSubscriptionMap[location.id]?.contains(subscriptionEndpt)){
+				if(state.locationSubscriptionMap[location.id].size() == 1){
+					state.locationSubscriptionMap.remove(location.id)
+				} else {
+					state.locationSubscriptionMap[location.id].remove(subscriptionEndpt)
+				}
+                state.verificationKeyMap.remove(subscriptionEndpt)
+				log.info "Removed subscription URL: ${subscriptionEndpt} for Location ${location.name}"
+			}
+        }else{
+        	httpError(400, "missing input parameter: subscriptionURL")
+        }
+	} catch (e) {
+		httpError(500, "something went wrong: $e")
+	}
+
+	log.info "Current location subscription map is ${state.locationSubscriptionMap}"
+    log.info "Current verification key map is ${state.verificationKeyMap}"
+}
+
+//When events are triggered, send HTTP post to web socket servers
+def deviceEventHandler(evt) {
+	def evtDevice = evt.device
+	def evtDeviceType = getDeviceType(evtDevice)
+	def deviceData = [];
+   	
+    if(evtDeviceType == "thermostat") {
+		deviceData = [name: evtDevice.displayName, id: evtDevice.id, status:evtDevice.status, deviceType:evtDeviceType, manufacturer:evtDevice.manufacturerName, model:evtDevice.modelName, attributes: deviceAttributeList(evtDevice, evtDeviceType), locationMode: getLocationModeInfo(), locationId: location.id ]
+	} else {
+		deviceData = [name: evtDevice.displayName, id: evtDevice.id, status:evtDevice.status, deviceType:evtDeviceType, manufacturer:evtDevice.manufacturerName, model:evtDevice.modelName, attributes: deviceAttributeList(evtDevice, evtDeviceType), locationId: location.id ]
+	}
+    
+    if(evt.data != null){
+		def evtData = parseJson(evt.data)
+		log.info "Received event for ${evtDevice.displayName}, data: ${evtData},  description: ${evt.descriptionText}"
+	}
+    
+    def params = [ body: deviceData ]
+    
+	//send event to all subscriptions urls
+	log.debug "Current subscription urls for ${evtDevice.displayName} is ${state.deviceSubscriptionMap[evtDevice.id]}"
+	state.deviceSubscriptionMap[evtDevice.id].each {
+		params.uri = "${it}"
+        if(state.verificationKeyMap[it] != null ){
+        	def key = state.verificationKeyMap[it]
+            params.headers = [Signature: ComputHMACValue(key, groovy.json.JsonOutput.toJson(params.body))]
+        }
+		log.trace "POST URI: ${params.uri}"
+        log.trace "Headers: ${params.headers}"
+		log.trace "Payload: ${params.body}"
+		try{
+			httpPostJson(params) { resp ->
+				log.trace "response status code: ${resp.status}"
+				log.trace "response data: ${resp.data}"
+			}
+		} catch (e) {
+			log.error "something went wrong: $e"
+		}
+	}
+}
+
+def locationEventHandler(evt) {
+	log.info "Received event for location ${location.name}/${location.id}, Event: ${evt.name}, description: ${evt.descriptionText}, apiServerUrl: ${apiServerUrl("")}"
+    switch(evt.name){
+    	case "DeviceCreated":
+        case "DeviceDeleted":
+        	def evtDevice = evt.device
+            def evtDeviceType = getDeviceType(evtDevice)
+            def params = [ body: [ eventType:evt.name, deviceId: evtDevice.id, locationId: location.id ] ]
+            
+            if (evt.name == "DeviceDeleted" && state.deviceSubscriptionMap[deviceId] != null){
+            	state.deviceSubscriptionMap.remove(evtDevice.id)
+            }
+        
+            state.locationSubscriptionMap[location.id].each {
+                params.uri = "${it}"
+                if(state.verificationKeyMap[it] != null ){
+                    def key = state.verificationKeyMap[it]
+                    params.headers = [Signature: ComputHMACValue(key, groovy.json.JsonOutput.toJson(params.body))]
+                }
+                log.trace "POST URI: ${params.uri}"
+				log.trace "Headers: ${params.headers}"
+                log.trace "Payload: ${params.body}"
+                try{
+                    httpPostJson(params) { resp ->
+                        log.trace "response status code: ${resp.status}"
+                        log.trace "response data: ${resp.data}"
+                    }
+                } catch (e) {
+                    log.error "something went wrong: $e"
+                }
+            }
+    	case "DeviceUpdated":
+        default:
+        break
+    }
+}
+
+private ComputHMACValue(key, data){
+	try {
+    	log.debug "data hased: ${data}"
+        SecretKeySpec secretKeySpec = new SecretKeySpec(key.getBytes("UTF-8"), "HmacSHA1")
+		Mac mac = Mac.getInstance("HmacSHA1")
+		mac.init(secretKeySpec)
+		byte[] digest = mac.doFinal(data.getBytes("UTF-8"))
+		return byteArrayToString(digest)
+	} catch (InvalidKeyException e) {  
+     	log.error "Invalid key exception while converting to HMac SHA1"
+	}
+}
+
+private def byteArrayToString(byte[] data) {
+	BigInteger bigInteger = new BigInteger(1, data)
+    String hash = bigInteger.toString(16)
+	return hash
+}
+
+/*** Device Query/Update Functions  ***/
+
+//Endpoints function: return all device data in json format
+def getDevices() {
+	def deviceData = [] 
+	inputs?.each {
+		def deviceType = getDeviceType(it)
+		if(deviceType == "thermostat") {
+			deviceData << [name: it.displayName, id: it.id, status:it.status, deviceType:deviceType, manufacturer:it.manufacturerName, model:it.modelName, attributes: deviceAttributeList(it, deviceType), locationMode: getLocationModeInfo()]
+		} else {
+			deviceData << [name: it.displayName, id: it.id, status:it.status, deviceType:deviceType, manufacturer:it.manufacturerName, model:it.modelName, attributes: deviceAttributeList(it, deviceType)]
+		} 
+	}
+ 
+	log.debug "getDevices, return: ${deviceData}"
+	return deviceData
+}
+
+//Endpoints function: get device data
+def getDevice() {	
+	def it = findDevice(params.id)
+	def deviceType = getDeviceType(it)
+	def device
+	if(deviceType == "thermostat") {
+		device = [name: it.displayName, id: it.id, status:it.status, deviceType:deviceType, manufacturer:it.manufacturerName, model:it.modelName, attributes: deviceAttributeList(it,deviceType), locationMode: getLocationModeInfo()]
+	} else {
+		device = [name: it.displayName, id: it.id, status:it.status, deviceType:deviceType, manufacturer:it.manufacturerName, model:it.modelName, attributes: deviceAttributeList(it, deviceType)]
+	}
+
+	log.debug "getDevice, return: ${device}"
+	return device
+}
+
+//Endpoints function: update device data
+void updateDevice() {	
+	def device = findDevice(params.id)
+	request.JSON.each {   
+		def command = it.key
+		def value = it.value
+		if (command){
+			def commandList = mapDeviceCommands(command, value)
+			command = commandList[0]
+			value = commandList[1]
+			
+			if (command == "setAwayMode") {
+				log.info "Setting away mode to ${value}"
+				if (location.modes?.find {it.name == value}) {
+					location.setMode(value)
+				}
+			}else if (command == "thermostatSetpoint"){
+				switch(device.currentThermostatMode){
+					case "cool":
+						log.info "Update: ${device.displayName}, [${command}, ${value}]"
+						device.setCoolingSetpoint(value)
+						break
+					case "heat":
+					case "emergency heat":
+						log.info "Update: ${device.displayName}, [${command}, ${value}]"
+						device.setHeatingSetpoint(value)
+						break
+					default:
+						httpError(501, "this mode: ${device.currentThermostatMode} does not allow changing thermostat setpoint.")
+						break
+				}
+			}else if (!device) {
+				log.error "updateDevice, Device not found"
+				httpError(404, "Device not found")
+			} else if (!device.hasCommand(command)) {
+				log.error "updateDevice, Device does not have the command"
+				httpError(404, "Device does not have such command")
+			} else {
+				if (command == "setColor") {
+					log.info "Update: ${device.displayName}, [${command}, ${value}]"
+					device."$command"(hex: value)
+				} else if(value.isNumber()) {
+					def intValue = value as Integer
+					log.info "Update: ${device.displayName}, [${command}, ${intValue}(int)]"
+					device."$command"(intValue)
+				} else if (value){
+					log.info "Update: ${device.displayName}, [${command}, ${value}]"
+					device."$command"(value)
+				} else {
+					log.info "Update: ${device.displayName}, [${command}]"
+					device."$command"()
+				}
+			}
+		}
+	}
+}
+
+/*** Private Functions ***/
+
+//Return current location mode info
+private getLocationModeInfo() {
+	return [mode: location.mode, supported: location.modes.name]
+}
+
+//Map each device to a type given it's capabilities
+private getDeviceType(device) {
+	def deviceType
+	def capabilities = device.capabilities
+	log.debug "capabilities: [${device}, ${capabilities}]"
+	log.debug "supported commands: [${device}, ${device.supportedCommands}]"
+    
+	//Loop through the device capability list to determine the device type.
+	capabilities.each {capability ->
+		switch(capability.name.toLowerCase())
+		{
+			case "switch":
+				deviceType = "switch"
+
+				//If the device also contains "Switch Level" capability, identify it as a "light" device.
+				if (capabilities.any{it.name.toLowerCase() == "switch level"}){
+                	
+                    //If the device also contains "Power Meter" capability, identify it as a "dimmerSwitch" device.
+                    if (capabilities.any{it.name.toLowerCase() == "power meter"}){
+                        deviceType = "dimmerSwitch"
+                        return deviceType
+                    } else {
+                        deviceType = "light"
+                        return deviceType
+                    }
+                }
+				break
+			case "garageDoorControl":
+				deviceType = "garageDoor"
+				return deviceType
+			case "lock":
+				deviceType = "lock"
+				return deviceType
+			case "video camera":
+				deviceType = "camera"
+				return deviceType
+			case "thermostat":
+				deviceType = "thermostat"
+				return deviceType    
+			case "acceleration sensor":
+			case "contact sensor":
+			case "motion sensor":
+			case "presence sensor":
+			case "water sensor":
+				deviceType = "genericSensor"
+				return deviceType
+			default:
+				break
+		}
+	}
+	return deviceType
+}
+
+//Return a specific device give the device ID.
+private findDevice(deviceId) {
+	return inputs?.find { it.id == deviceId }
+}
+ 
+//Return a list of device attributes
+private deviceAttributeList(device, deviceType) {
+	def attributeList = [:]
+	def allAttributes = device.supportedAttributes
+	allAttributes.each { attribute ->
+        	try {
+			def currentState = device.currentState(attribute.name)
+            		if(currentState != null ){
+                		switch(attribute.name){
+                    		case 'temperature':
+                        		attributeList.putAll([ (attribute.name): currentState.value, 'temperatureScale':location.temperatureScale ])
+                        		break;
+	                    	default:
+        	                	attributeList.putAll([(attribute.name): currentState.value ])
+                	        	break;
+                		}
+                		if( deviceType == "genericSensor" ){
+                    			def key = attribute.name + "_lastUpdated"
+                			attributeList.putAll([ (key): currentState.isoDate ])
+                		}
+	            	} else {
+            			attributeList.putAll([ (attribute.name): null ]);
+            		}
+		} catch(e) {
+			attributeList.putAll([ (attribute.name): null ]);
+		}
+	}
+    return attributeList
+}
+
+//Map device command and value. 
+//input command and value are from UWP,
+//returns resultCommand and resultValue that corresponds with function and value in SmartApps
+private mapDeviceCommands(command, value) {
+	log.debug "mapDeviceCommands: [${command}, ${value}]"
+	def resultCommand = command
+	def resultValue = value
+	switch (command) {
+		case "switch":
+			if (value == 1 || value == "1" || value == "on") {
+				resultCommand = "on"
+				resultValue = ""
+			} else if (value == 0 || value == "0" || value == "off") {
+				resultCommand = "off"
+				resultValue = ""
+			}
+			break
+		// light attributes
+		case "level":
+			resultCommand = "setLevel"
+			resultValue = value
+			break
+		case "hue":
+			resultCommand = "setHue"
+			resultValue = value
+			break
+		case "saturation":
+			resultCommand = "setSaturation"
+			resultValue = value
+			break
+		case "colorTemperature":
+			resultCommand = "setColorTemperature"
+			resultValue = value
+			break
+		case "color":	
+			resultCommand = "setColor"
+			resultValue = value
+		// thermostat attributes
+		case "hvacMode":
+			resultCommand = "setThermostatMode"
+			resultValue = value
+			break
+		case "fanMode":
+			resultCommand = "setThermostatFanMode"
+			resultValue = value
+			break
+		case "awayMode":
+			resultCommand = "setAwayMode"
+			resultValue = value
+			break
+		case "coolingSetpoint":
+			resultCommand = "setCoolingSetpoint"
+			resultValue = value
+			break
+		case "heatingSetpoint":	
+			resultCommand = "setHeatingSetpoint"
+			resultValue = value
+			break
+		case "thermostatSetpoint":
+			resultCommand = "thermostatSetpoint"
+			resultValue = value
+			break
+		// lock attributes
+		case "locked":
+			if (value == 1 || value == "1" || value == "lock") {
+				resultCommand = "lock"
+				resultValue = ""
+			}
+			else if (value == 0 || value == "0" || value == "unlock") {
+				resultCommand = "unlock"
+				resultValue = ""
+			}
+			break
+		default:
+			break
+	 }
+	 
+	 return [resultCommand,resultValue]
+}