MSA-1985: SmartThingsToStart

Rolling down staging to master

devicetypes/drzwave/ezmultipli.src/ezmultipli.groovy

@@ -38,9 +38,9 @@ metadata {
     tiles (scale: 2){      
 		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
 			tileAttribute ("device.switch", key: "PRIMARY_CONTROL", icon: "st.Lighting.light18") {
-				attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#00A0DC", nextState:"turningOff"
 				attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
-				attributeState "turningOn", label:'${name}', icon:"st.switches.light.on", backgroundColor:"#79b821"
+				attributeState "turningOn", label:'${name}', icon:"st.switches.light.on", backgroundColor:"#00A0DC"
 				attributeState "turningOff", label:'${name}', icon:"st.switches.light.off", backgroundColor:"#ffffff"
 			}
 			tileAttribute ("device.color", key: "COLOR_CONTROL") {
@@ -52,20 +52,20 @@ metadata {
         }
 
 		standardTile("motion", "device.motion", width: 2, height: 2, canChangeIcon: true, canChangeBackground: true) {
-			state "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0"
+			state "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#00A0DC"
-			state "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff"
+			state "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#cccccc"
 		}
 		valueTile("temperature", "device.temperature", width: 2, height: 2) {
 			state "temperature", label:'${currentValue}°', unit:"F", icon:"", // would be better if the units would switch to the desired units of the system (imperial or metric)
 			backgroundColors:[
-				[value: 0,  color: "#1010ff"], // blue=cold
+				[value: 0,  color: "#153591"], // blue=cold
-				[value: 65, color: "#a0a0f0"],
+				[value: 65, color: "#44b621"], // green
-				[value: 70, color: "#e0e050"],
+				[value: 70, color: "#44b621"], // green
-				[value: 75, color: "#f0d030"], // yellow
+				[value: 75, color: "#f1d801"], // yellow
-				[value: 80, color: "#fbf020"],
+				[value: 80, color: "#f1d801"], // yellow
-				[value: 85, color: "#fbdc01"],
+				[value: 85, color: "#f1d801"], // yellow
-				[value: 90, color: "#fb3a01"],
+				[value: 90, color: "#d04e00"], // red
-				[value: 95, color: "#fb0801"]  // red=hot
+				[value: 95, color: "#bc2323"]  // red=hot
 			]
 		}
 

devicetypes/fibargroup/fibaro-motion-sensor-zw5.src/fibaro-motion-sensor-zw5.groovy

@@ -34,8 +34,8 @@ metadata {
     tiles(scale: 2) {
     	multiAttributeTile(name:"FGMS", type:"lighting", width:6, height:4) {//with generic type secondary control text is not displayed in Android app
         	tileAttribute("device.motion", key:"PRIMARY_CONTROL") {
-            	attributeState("inactive", label:"no motion", icon:"st.motion.motion.inactive", backgroundColor:"#79b821")
+            	attributeState("inactive", label:"no motion", icon:"st.motion.motion.inactive", backgroundColor:"#cccccc")
-            	attributeState("active", label:"motion", icon:"st.motion.motion.active", backgroundColor:"#ffa81e")
+            	attributeState("active", label:"motion", icon:"st.motion.motion.active", backgroundColor:"#00A0DC")
             }
 
             tileAttribute("device.tamper", key:"SECONDARY_CONTROL") {

devicetypes/johnrucker/coopboss-h3vx.src/coopboss-h3vx.groovy

@@ -95,12 +95,12 @@ metadata {
 		multiAttributeTile(name:"doorCtrl", type:"generic", width:6, height:4) {tileAttribute("device.doorState", key: "PRIMARY_CONTROL") 
         	{  
 			attributeState "unknown", label: '${name}', action:"openDoor", icon: "st.Outdoor.outdoor20", nextState:"Sent"          
-			attributeState "open", label: '${name}', action:"closeDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#0000ff" , nextState:"Sent" 
+			attributeState "open", label: '${name}', action:"closeDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#00A0DC" , nextState:"Sent"
-			attributeState "opening", label: '${name}', action:"closeDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#ffa81e"            
+			attributeState "opening", label: '${name}', action:"closeDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#00A0DC"
-			attributeState "closed", label: '${name}', action:"openDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#79b821", nextState:"Sent" 
+			attributeState "closed", label: '${name}', action:"openDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#ffffff", nextState:"Sent"
-			attributeState "closing", label: '${name}', action:"openDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#ffa81e" 
+			attributeState "closing", label: '${name}', action:"openDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#ffffff"
-			attributeState "jammed", label: '${name}', action:"closeDoorHiI", icon: "st.Outdoor.outdoor20", backgroundColor: "#ff0000", nextState:"Sent" 
+			attributeState "jammed", label: '${name}', action:"closeDoorHiI", icon: "st.Outdoor.outdoor20", backgroundColor: "#ff0000", nextState:"Sent"
-			attributeState "forced close", label: 'forced\rclose', action:"openDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#ff8000", nextState:"Sent"   
+			attributeState "forced close", label: 'forced\rclose', action:"openDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#ff8000", nextState:"Sent"
 			attributeState "fault", label: 'FAULT', action:"openDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#ff0000", nextState:"Sent"              
 			attributeState "Sent", label: 'wait', icon: "st.motion.motion.active", backgroundColor: "#ffa81e"              
 			} 
@@ -135,13 +135,13 @@ metadata {
     	}        
         
 		standardTile("autoClose", "device.autoCloseEnable", width: 2, height: 2){
-			state "on", label: 'Auto', action:"autoCloseOff", icon: "st.doors.garage.garage-closing", backgroundColor: "#79b821", nextState:"Sent"
+			state "on", label: 'Auto', action:"autoCloseOff", icon: "st.doors.garage.garage-closing", backgroundColor: "#00A0DC", nextState:"Sent"
 			state "off", label: 'Auto', action:"autoCloseOn", icon: "st.doors.garage.garage-closing", nextState:"Sent"
 			state "Sent", label: 'wait', icon: "st.motion.motion.active", backgroundColor: "#ffa81e"              
 		}    
         
 		standardTile("autoOpen", "device.autoOpenEnable", width: 2, height: 2){
-			state "on", label: 'Auto', action:"autoOpenOff", icon: "st.doors.garage.garage-opening", backgroundColor: "#79b821", nextState:"Sent"
+			state "on", label: 'Auto', action:"autoOpenOff", icon: "st.doors.garage.garage-opening", backgroundColor: "#00A0DC", nextState:"Sent"
 			state "off", label: 'Auto', action:"autoOpenOn", icon: "st.doors.garage.garage-opening", nextState:"Sent"
 			state "Sent", label: 'wait', icon: "st.motion.motion.active", backgroundColor: "#ffa81e"              
 		}            
@@ -189,13 +189,13 @@ metadata {
         
 		standardTile("aux1", "device.Aux1", width: 2, height: 2, canChangeIcon: true) {
 			state "off", label:'Aux 1', action:"Aux1On", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"Sent"        
-			state "on", label:'Aux 1', action:"Aux1Off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"Sent"
+			state "on", label:'Aux 1', action:"Aux1Off", icon:"st.switches.switch.on", backgroundColor:"#00A0DC", nextState:"Sent"
 			state "Sent", label: 'wait', icon: "st.motion.motion.active", backgroundColor: "#ffa81e"            
 		}        
         
 		standardTile("aux2", "device.Aux2", width: 2, height: 2, canChangeIcon: true) {
 			state "off", label:'Aux 2', action:"Aux2On", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"Sent"        
-			state "on", label:'Aux 2', action:"Aux2Off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"Sent"
+			state "on", label:'Aux 2', action:"Aux2Off", icon:"st.switches.switch.on", backgroundColor:"#00A0DC", nextState:"Sent"
 			state "Sent", label: 'wait', icon: "st.motion.motion.active", backgroundColor: "#ffa81e"   
 		}            
         

devicetypes/smartthings/aeon-multisensor-6.src/aeon-multisensor-6.groovy

@@ -103,7 +103,7 @@ metadata {
 		}
 
 		valueTile("illuminance", "device.illuminance", inactiveLabel: false, width: 2, height: 2) {
-			state "illuminance", label:'${currentValue} ${unit}', unit:"lux"
+			state "illuminance", label:'${currentValue} lux', unit:""
 		}
 
 		valueTile("ultravioletIndex", "device.ultravioletIndex", inactiveLabel: false, width: 2, height: 2) {
@@ -410,4 +410,4 @@ private command(physicalgraph.zwave.Command cmd) {
 private commands(commands, delay=200) {
 	log.info "sending commands: ${commands}"
 	delayBetween(commands.collect{ command(it) }, delay)
-}
+}

devicetypes/smartthings/aeon-multisensor-gen5.src/aeon-multisensor-gen5.groovy

@@ -86,7 +86,7 @@ metadata {
 			state "humidity", label:'${currentValue}% humidity', unit:""
 		}
 		valueTile("illuminance", "device.illuminance", inactiveLabel: false, width: 2, height: 2) {
-			state "luminosity", label:'${currentValue} ${unit}', unit:"lux"
+			state "luminosity", label:'${currentValue} lux', unit:""
 		}
 		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
 			state "battery", label:'${currentValue}% battery', unit:""
@@ -282,5 +282,4 @@ private secure(physicalgraph.zwave.Command cmd) {
 
 private secureSequence(commands, delay=200) {
 	delayBetween(commands.collect{ secure(it) }, delay)
-}
+}
-

devicetypes/smartthings/aeon-multisensor.src/aeon-multisensor.groovy

@@ -79,7 +79,7 @@ metadata {
 			state "humidity", label:'${currentValue}% humidity', unit:""
 		}
 		valueTile("illuminance", "device.illuminance", inactiveLabel: false, width: 2, height: 2) {
-			state "luminosity", label:'${currentValue} ${unit}', unit:"lux"
+			state "luminosity", label:'${currentValue} lux', unit:""
 		}
 		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
 			state "battery", label:'${currentValue}% battery', unit:""
@@ -193,4 +193,4 @@ def configure() {
 		// set data reporting period to 5 minutes
 		zwave.configurationV1.configurationSet(parameterNumber: 111, size: 4, scaledConfigurationValue: 300).format()
 	])
-}
+}

devicetypes/smartthings/fibaro-door-window-sensor.src/fibaro-door-window-sensor.groovy

@@ -68,8 +68,8 @@
 
 	tiles {
 		standardTile("contact", "device.contact", width: 2, height: 2) {
-			state "open",   label: '${name}', icon: "st.contact.contact.open",   backgroundColor: "#ffa81e"
+			state "open",   label: '${name}', icon: "st.contact.contact.open",   backgroundColor: "#e86d13"
-			state "closed", label: '${name}', icon: "st.contact.contact.closed", backgroundColor: "#79b821"
+			state "closed", label: '${name}', icon: "st.contact.contact.closed", backgroundColor: "#00A0DC"
 		}
 		valueTile("temperature", "device.temperature", inactiveLabel: false) {
 			state "temperature", label:'${currentValue}°',
@@ -86,7 +86,7 @@
 		}
         standardTile("tamper", "device.alarm") {
 			state("secure", label:'secure',    icon:"st.locks.lock.locked",   backgroundColor:"#ffffff")
-			state("tampered", label:'tampered', icon:"st.locks.lock.unlocked", backgroundColor:"#53a7c0")
+			state("tampered", label:'tampered', icon:"st.locks.lock.unlocked", backgroundColor:"#00a0dc")
 		}
 		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat") {
 			state "battery", label:'${currentValue}% battery', unit:""

devicetypes/smartthings/mimolite-garage-door-controller.src/mimolite-garage-door-controller.groovy

@@ -62,8 +62,8 @@ metadata {
 			state "off", label: '${name}', action: "on", icon: "st.switches.switch.off", backgroundColor: "#ffffff"
         }
         standardTile("contact", "device.contact", inactiveLabel: false) {
-			state "open", label: '${name}', icon: "st.contact.contact.open", backgroundColor: "#ffa81e"
+			state "open", label: '${name}', icon: "st.contact.contact.open", backgroundColor: "#e86d13"
-			state "closed", label: '${name}', icon: "st.contact.contact.closed", backgroundColor: "#79b821"
+			state "closed", label: '${name}', icon: "st.contact.contact.closed", backgroundColor: "#00A0DC"
 		}
         standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
 			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"

devicetypes/smartthings/smartalert-siren.src/README.md

@@ -4,7 +4,7 @@ Cloud Execution
 
 Works with:
 
-* [FortrezZ Siren Strobe Alarm](https://www.smartthings.com/works-with-smartthings/other/fortrezz-water-valve)
+* [FortrezZ Siren Strobe Alarm](https://www.smartthings.com/products/fortrezz-siren-strobe-alarm)
 
 ## Table of contents
 

devicetypes/smartthings/smartpower-dimming-outlet.src/smartpower-dimming-outlet.groovy

@@ -44,9 +44,9 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
 			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#00A0DC", nextState:"turningOff"
 				attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
-				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#00A0DC", nextState:"turningOff"
 				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
 			}
 			tileAttribute ("device.level", key: "SLIDER_CONTROL") {

devicetypes/smartthings/smartsense-garage-door-sensor-button.src/smartsense-garage-door-sensor-button.groovy

@@ -56,8 +56,8 @@ metadata {
 			state("closing", label:'${name}', icon:"st.doors.garage.garage-closing", backgroundColor:"#00A0DC")
 		}
 		standardTile("contact", "device.contact") {
-			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
+			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#e86d13")
-			state("closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821")
+			state("closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#00A0DC")
 		}
 		standardTile("acceleration", "device.acceleration", decoration: "flat") {
 			state("active", label:'${name}', icon:"st.motion.acceleration.active", backgroundColor:"#00A0DC")

devicetypes/smartthings/testing/simulated-refrigerator-door.src/simulated-refrigerator-door.groovy

@@ -22,16 +22,16 @@ metadata {
 
 	tiles {
 		standardTile("contact", "device.contact", width: 2, height: 2) {
-			state("closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821", action: "open")
+			state("closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#00A0DC", action: "open")
-			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e", action: "close")
+			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#e86d13", action: "close")
 		}
 		standardTile("freezerDoor", "device.contact", width: 2, height: 2, decoration: "flat") {
-			state("closed", label:'Freezer', icon:"st.contact.contact.closed", backgroundColor:"#79b821")
+			state("closed", label:'Freezer', icon:"st.contact.contact.closed", backgroundColor:"#00A0DC")
-			state("open", label:'Freezer', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
+			state("open", label:'Freezer', icon:"st.contact.contact.open", backgroundColor:"#e86d13")
 		}
 		standardTile("mainDoor", "device.contact", width: 2, height: 2, decoration: "flat") {
-			state("closed", label:'Fridge', icon:"st.contact.contact.closed", backgroundColor:"#79b821")
+			state("closed", label:'Fridge', icon:"st.contact.contact.closed", backgroundColor:"#00A0DC")
-			state("open", label:'Fridge', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
+			state("open", label:'Fridge', icon:"st.contact.contact.open", backgroundColor:"#e86d13")
 		}
 		standardTile("control", "device.contact", width: 1, height: 1, decoration: "flat") {
 			state("closed", label:'${name}', icon:"st.contact.contact.closed", action: "open")

devicetypes/smartthings/testing/simulated-refrigerator.src/simulated-refrigerator.groovy

@@ -25,8 +25,8 @@ metadata {
 
 	tiles(scale: 2) {
 		standardTile("contact", "device.contact", width: 4, height: 4) {
-			state("closed", label:'${name}', icon:"st.fridge.fridge-closed", backgroundColor:"#79b821")
+			state("closed", label:'${name}', icon:"st.fridge.fridge-closed", backgroundColor:"#00A0DC")
-			state("open", label:'${name}', icon:"st.fridge.fridge-open", backgroundColor:"#ffa81e")
+			state("open", label:'${name}', icon:"st.fridge.fridge-open", backgroundColor:"#e86d13")
 		}
 		childDeviceTile("freezerDoor", "freezerDoor", height: 2, width: 2, childTileName: "freezerDoor")
 		childDeviceTile("mainDoor", "mainDoor", height: 2, width: 2, childTileName: "mainDoor")

devicetypes/smartthings/tile-ux/tile-multiattribute-generic.src/tile-multiattribute-generic.groovy

@@ -27,7 +27,7 @@ metadata {
 			tileAttribute("device.switch", key: "PRIMARY_CONTROL") {
 				attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#00A0DC", nextState:"turningOff"
 				attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
-				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#00A0DC", nextState:"turningOff"
 				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
 			}
 		}
@@ -35,7 +35,7 @@ metadata {
 			tileAttribute("device.switch", key: "PRIMARY_CONTROL") {
 				attributeState "on", label:'${name}', backgroundColor:"#00A0DC", nextState:"turningOff"
 				attributeState "off", label:'${name}', backgroundColor:"#ffffff", nextState:"turningOn"
-				attributeState "turningOn", label:'${name}', backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOn", label:'${name}', backgroundColor:"#00A0DC", nextState:"turningOff"
 				attributeState "turningOff", label:'${name}', backgroundColor:"#ffffff", nextState:"turningOn"
 			}
 			tileAttribute("device.level", key: "SECONDARY_CONTROL") {
@@ -59,7 +59,7 @@ metadata {
 			tileAttribute("device.switch", key: "SECONDARY_CONTROL") {
 				attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#00A0DC", nextState:"turningOff"
 				attributeState "off", label:'${name}', action:"switch.on", backgroundColor:"#ffffff", nextState:"turningOn"
-				attributeState "turningOn", label:'…', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOn", label:'…', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#00A0DC", nextState:"turningOff"
 				attributeState "turningOff", label:'…', action:"switch.on", backgroundColor:"#ffffff", nextState:"turningOn"
 			}
 			tileAttribute("device.level", key: "VALUE_CONTROL") {

devicetypes/smartthings/wemo-light-switch.src/wemo-light-switch.groovy

@@ -40,11 +40,11 @@ metadata {
     tiles(scale: 2) {
         multiAttributeTile(name:"rich-control", type: "switch", canChangeIcon: true){
             tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-                 attributeState "on", label:'${name}', action:"switch.off", icon:"st.Home.home30", backgroundColor:"#79b821", nextState:"turningOff"
+                 attributeState "on", label:'${name}', action:"switch.off", icon:"st.Home.home30", backgroundColor:"#00A0DC", nextState:"turningOff"
                  attributeState "off", label:'${name}', action:"switch.on", icon:"st.Home.home30", backgroundColor:"#ffffff", nextState:"turningOn"
-                 attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.Home.home30", backgroundColor:"#79b821", nextState:"turningOff"
+                 attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.Home.home30", backgroundColor:"#00A0DC", nextState:"turningOff"
                  attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.Home.home30", backgroundColor:"#ffffff", nextState:"turningOn"
-                 attributeState "offline", label:'${name}', icon:"st.Home.home30", backgroundColor:"#ff0000"
+                 attributeState "offline", label:'${name}', icon:"st.Home.home30", backgroundColor:"#cccccc"
  			}
             tileAttribute ("currentIP", key: "SECONDARY_CONTROL") {
              	 attributeState "currentIP", label: ''

devicetypes/smartthings/wemo-switch.src/wemo-switch.groovy

@@ -38,11 +38,11 @@
     tiles(scale: 2) {
         multiAttributeTile(name:"rich-control", type: "switch", canChangeIcon: true){
             tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-                 attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.off", backgroundColor:"#79b821", nextState:"turningOff"
+                 attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.off", backgroundColor:"#00A0DC", nextState:"turningOff"
                  attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.on", backgroundColor:"#ffffff", nextState:"turningOn"
-                 attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.off", backgroundColor:"#79b821", nextState:"turningOff"
+                 attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.off", backgroundColor:"#00A0DC", nextState:"turningOff"
                  attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.on", backgroundColor:"#ffffff", nextState:"turningOn"
-                 attributeState "offline", label:'${name}', icon:"st.switches.switch.off", backgroundColor:"#ff0000"
+                 attributeState "offline", label:'${name}', icon:"st.switches.switch.off", backgroundColor:"#cccccc"
  			}
             tileAttribute ("currentIP", key: "SECONDARY_CONTROL") {
              	 attributeState "currentIP", label: ''
@@ -50,11 +50,11 @@
         }
 
         standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-            state "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.off", backgroundColor:"#79b821", nextState:"turningOff"
+            state "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.off", backgroundColor:"#00A0DC", nextState:"turningOff"
             state "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.on", backgroundColor:"#ffffff", nextState:"turningOn"
-            state "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.off", backgroundColor:"#79b821", nextState:"turningOff"
+            state "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.off", backgroundColor:"#00A0DC", nextState:"turningOff"
             state "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.on", backgroundColor:"#ffffff", nextState:"turningOn"
-            state "offline", label:'${name}', icon:"st.switches.switch.off", backgroundColor:"#ff0000"
+            state "offline", label:'${name}', icon:"st.switches.switch.off", backgroundColor:"#cccccc"
         }
 
         standardTile("refresh", "device.switch", inactiveLabel: false, height: 2, width: 2, decoration: "flat") {

devicetypes/smartthings/zigbee-dimmer.src/zigbee-dimmer.groovy

@@ -25,6 +25,7 @@ metadata {
 
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 ON/OFF/DIM", deviceJoinName: "SYLVANIA Smart A19 Soft White"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 ON/OFF/DIM 10 Year", deviceJoinName: "SYLVANIA Smart 10-Year A19"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, FF00", outClusters: "0019", manufacturer: "MRVL", model: "MZ100", deviceJoinName: "Wemo Bulb"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B05", outClusters: "0019", manufacturer: "OSRAM SYLVANIA", model: "iQBR30", deviceJoinName: "Sylvania Ultra iQ"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY PAR38 ON/OFF/DIM", deviceJoinName: "SYLVANIA Smart PAR38 Soft White"

devicetypes/smartthings/zigbee-rgb-bulb.src/zigbee-rgb-bulb.groovy

@@ -1,5 +1,5 @@
 /**
- *  Copyright 2016 SmartThings
+ *  Copyright 2017 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -64,6 +64,7 @@ private getATTRIBUTE_HUE() { 0x0000 }
 private getATTRIBUTE_SATURATION() { 0x0001 }
 private getHUE_COMMAND() { 0x00 }
 private getSATURATION_COMMAND() { 0x03 }
+private getMOVE_TO_HUE_AND_SATURATION_COMMAND() { 0x06 }
 private getCOLOR_CONTROL_CLUSTER() { 0x0300 }
 
 // Parse incoming device messages to generate events
@@ -84,11 +85,11 @@ def parse(String description) {
 
 		if (zigbeeMap?.clusterInt == COLOR_CONTROL_CLUSTER) {
 			if(zigbeeMap.attrInt == ATTRIBUTE_HUE){  //Hue Attribute
-				def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
+				def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 0xfe * 100)
 				sendEvent(name: "hue", value: hueValue, descriptionText: "Color has changed")
 			}
 			else if(zigbeeMap.attrInt == ATTRIBUTE_SATURATION){ //Saturation Attribute
-				def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
+				def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 0xfe * 100)
 				sendEvent(name: "saturation", value: saturationValue, descriptionText: "Color has changed", displayed: false)
 			}
 		}
@@ -123,7 +124,12 @@ def ping() {
 }
 
 def refresh() {
-	zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION) + zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, DataType.UINT8, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, DataType.UINT8, 1, 3600, 0x01)
+	zigbee.onOffRefresh() +
+	zigbee.levelRefresh() +
+	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) +
+	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION) +
+	zigbee.onOffConfig(0, 300) +
+	zigbee.levelConfig()
 }
 
 def configure() {
@@ -133,26 +139,38 @@ def configure() {
 	sendEvent(name: "checkInterval", value: 3 * 10 * 60 + 1 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
 	// OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
-	zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, DataType.UINT8, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, DataType.UINT8, 1, 3600, 0x01) + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
+	refresh()
 }
 
 def setLevel(value) {
 	zigbee.setLevel(value)
 }
 
+private getScaledHue(value) {
+	zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+}
+
+private getScaledSaturation(value) {
+	zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+}
+
 def setColor(value){
 	log.trace "setColor($value)"
-	zigbee.on() + setHue(value.hue) + "delay 500" + setSaturation(value.saturation)
+	zigbee.on() +
+	zigbee.command(COLOR_CONTROL_CLUSTER, MOVE_TO_HUE_AND_SATURATION_COMMAND,
+		getScaledHue(value.hue), getScaledSaturation(value.saturation), "0000") +
+	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) +
+	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }
 
 def setHue(value) {
-	def scaledHueValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+	zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, getScaledHue(value), "00", "0000") +
-	zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, scaledHueValue, "00", "0500")       //payload-> hue value, direction (00-> shortest distance), transition time (1/10th second) (0500 in U16 reads 5)
+	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE)
 }
 
 def setSaturation(value) {
-	def scaledSatValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+	zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, getScaledSaturation(value), "0000") +
-	zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, scaledSatValue, "0500") + "delay 1000" + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
+	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }
 
 def installed() {
@@ -161,4 +179,4 @@ def installed() {
 			sendEvent(name: "level", value: 100)
 		}
 	}
-}
+}

devicetypes/smartthings/zigbee-rgbw-bulb.src/zigbee-rgbw-bulb.groovy

@@ -1,5 +1,5 @@
 /**
- *  Copyright 2016 SmartThings
+ *  Copyright 2017 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -46,9 +46,9 @@ metadata {
     tiles(scale: 2) {
         multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
             tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-                attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#00A0DC", nextState:"turningOff"
                 attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#00A0DC", nextState:"turningOff"
                 attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
             }
             tileAttribute ("device.level", key: "SLIDER_CONTROL") {
@@ -78,6 +78,7 @@ private getATTRIBUTE_HUE() { 0x0000 }
 private getATTRIBUTE_SATURATION() { 0x0001 }
 private getHUE_COMMAND() { 0x00 }
 private getSATURATION_COMMAND() { 0x03 }
+private getMOVE_TO_HUE_AND_SATURATION_COMMAND() { 0x06 }
 private getCOLOR_CONTROL_CLUSTER() { 0x0300 }
 private getATTRIBUTE_COLOR_TEMPERATURE() { 0x0007 }
 
@@ -102,11 +103,11 @@ def parse(String description) {
 
         if (zigbeeMap?.clusterInt == COLOR_CONTROL_CLUSTER) {
             if(zigbeeMap.attrInt == ATTRIBUTE_HUE){  //Hue Attribute
-                def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
+                def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 0xfe * 100)
                 sendEvent(name: "hue", value: hueValue, descriptionText: "Color has changed")
             }
             else if(zigbeeMap.attrInt == ATTRIBUTE_SATURATION){ //Saturation Attribute
-                def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
+                def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 0xfe * 100)
                 sendEvent(name: "saturation", value: saturationValue, descriptionText: "Color has changed", displayed: false)
             }
         }
@@ -141,7 +142,13 @@ def ping() {
 }
 
 def refresh() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION) + zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, DataType.UINT8, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, DataType.UINT8, 1, 3600, 0x01)
+    zigbee.onOffRefresh() +
+    zigbee.levelRefresh() +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE) +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION) +
+    zigbee.onOffConfig(0, 300) +
+    zigbee.levelConfig()
 }
 
 def configure() {
@@ -156,7 +163,12 @@ def configure() {
 
 def setColorTemperature(value) {
     setGenericName(value)
-    zigbee.setColorTemperature(value)
+    value = value as Integer
+    def tempInMired = (1000000 / value) as Integer
+    def finalHex = zigbee.swapEndianHex(zigbee.convertToHexString(tempInMired, 4))
+
+    zigbee.command(COLOR_CONTROL_CLUSTER, 0x0A, "$finalHex 0000") +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE)
 }
 
 //Naming based on the wiki article here: http://en.wikipedia.org/wiki/Color_temperature
@@ -180,19 +192,31 @@ def setLevel(value) {
     zigbee.setLevel(value)
 }
 
+private getScaledHue(value) {
+    zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+}
+
+private getScaledSaturation(value) {
+    zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+}
+
 def setColor(value){
     log.trace "setColor($value)"
-    zigbee.on() + setHue(value.hue) + "delay 300" + setSaturation(value.saturation)
+    zigbee.on() +
+    zigbee.command(COLOR_CONTROL_CLUSTER, MOVE_TO_HUE_AND_SATURATION_COMMAND,
+        getScaledHue(value.hue), getScaledSaturation(value.saturation), "0000") +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }
 
 def setHue(value) {
-    def scaledHueValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+    zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, getScaledHue(value), "00", "0000") +
-    zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, scaledHueValue, "00", "0500")       //payload-> hue value, direction (00-> shortest distance), transition time (1/10th second) (0500 in U16 reads 5)
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE)
 }
 
 def setSaturation(value) {
-    def scaledSatValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+    zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, getScaledSaturation(value), "0000") +
-    zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, scaledSatValue, "0500") + "delay 1000" + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }
 
 def installed() {
@@ -201,4 +225,4 @@ def installed() {
             sendEvent(name: "level", value: 100)
         }
     }
-}
+}

devicetypes/smartthings/zigbee-switch.src/zigbee-switch.groovy

@@ -41,9 +41,9 @@ metadata {
     tiles(scale: 2) {
         multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
             tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-                attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#00A0DC", nextState:"turningOff"
                 attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
-                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#00A0DC", nextState:"turningOff"
                 attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
             }
         }

devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/zigbee-white-color-temperature-bulb.groovy

@@ -1,5 +1,5 @@
 /**
- *  Copyright 2015 SmartThings
+ *  Copyright 2017 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -45,9 +45,9 @@ metadata {
     tiles(scale: 2) {
         multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
             tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-                attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#00A0DC", nextState:"turningOff"
                 attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
-                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#00A0DC", nextState:"turningOff"
                 attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
             }
             tileAttribute ("device.level", key: "SLIDER_CONTROL") {
@@ -71,6 +71,11 @@ metadata {
     }
 }
 
+// Globals
+private getMOVE_TO_COLOR_TEMPERATURE_COMMAND() { 0x0A }
+private getCOLOR_CONTROL_CLUSTER() { 0x0300 }
+private getATTRIBUTE_COLOR_TEMPERATURE() { 0x0007 }
+
 // Parse incoming device messages to generate events
 def parse(String description) {
     log.debug "description is $description"
@@ -123,7 +128,11 @@ def ping() {
 }
 
 def refresh() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh() + zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.colorTemperatureConfig()
+    zigbee.onOffRefresh() +
+    zigbee.levelRefresh() +
+    zigbee.colorTemperatureRefresh() +
+    zigbee.onOffConfig(0, 300) +
+    zigbee.levelConfig()
 }
 
 def configure() {
@@ -138,7 +147,12 @@ def configure() {
 
 def setColorTemperature(value) {
     setGenericName(value)
-    zigbee.setColorTemperature(value)
+	value = value as Integer
+    def tempInMired = (1000000 / value) as Integer
+    def finalHex = zigbee.swapEndianHex(zigbee.convertToHexString(tempInMired, 4))
+
+    zigbee.command(COLOR_CONTROL_CLUSTER, MOVE_TO_COLOR_TEMPERATURE_COMMAND, "$finalHex 0000") +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE)
 }
 
 //Naming based on the wiki article here: http://en.wikipedia.org/wiki/Color_temperature

devicetypes/smartthings/zll-dimmer-bulb.src/zll-dimmer-bulb.groovy

@@ -49,9 +49,9 @@ metadata {
     tiles(scale: 2) {
         multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
             tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-                attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#00A0DC", nextState:"turningOff"
                 attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
-                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#00A0DC", nextState:"turningOff"
                 attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
             }
             tileAttribute ("device.level", key: "SLIDER_CONTROL") {

devicetypes/smartthings/zll-rgb-bulb.src/zll-rgb-bulb.groovy

@@ -1,5 +1,5 @@
 /**
- *  Copyright 2016 SmartThings
+ *  Copyright 2017 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -55,6 +55,7 @@ private getATTRIBUTE_HUE() { 0x0000 }
 private getATTRIBUTE_SATURATION() { 0x0001 }
 private getHUE_COMMAND() { 0x00 }
 private getSATURATION_COMMAND() { 0x03 }
+private getMOVE_TO_HUE_AND_SATURATION_COMMAND() { 0x06 }
 private getCOLOR_CONTROL_CLUSTER() { 0x0300 }
 
 // Parse incoming device messages to generate events
@@ -72,11 +73,11 @@ def parse(String description) {
 
 		if (zigbeeMap?.clusterInt == COLOR_CONTROL_CLUSTER) {
 			if(zigbeeMap.attrInt == ATTRIBUTE_HUE){  //Hue Attribute
-				def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 360)
+				def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 0xfe * 100)
 				sendEvent(name: "hue", value: hueValue, displayed:false)
 			}
 			else if(zigbeeMap.attrInt == ATTRIBUTE_SATURATION){ //Saturation Attribute
-				def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
+				def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 0xfe * 100)
 				sendEvent(name: "saturation", value: saturationValue, displayed:false)
 			}
 		}
@@ -108,28 +109,46 @@ def configure() {
 }
 
 def configureAttributes() {
-	zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, DataType.UINT8, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, DataType.UINT8, 1, 3600, 0x01)
+	zigbee.onOffConfig() +
+	zigbee.levelConfig()
 }
 
 def refreshAttributes() {
-	zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
+	zigbee.onOffRefresh() +
+	zigbee.levelRefresh() +
+	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) +
+	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }
 
 def setLevel(value) {
 	zigbee.setLevel(value) + zigbee.onOffRefresh() + zigbee.levelRefresh()         //adding refresh because of ZLL bulb not conforming to send-me-a-report
 }
 
+private getScaledHue(value) {
+	zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+}
+
+private getScaledSaturation(value) {
+	zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+}
+
 def setColor(value){
 	log.trace "setColor($value)"
-	zigbee.on() + setHue(value.hue) + ["delay 300"] + setSaturation(value.saturation) + ["delay 2000"] + refreshAttributes()
+	zigbee.on() +
+	zigbee.command(COLOR_CONTROL_CLUSTER, MOVE_TO_HUE_AND_SATURATION_COMMAND,
+		getScaledHue(value.hue), getScaledSaturation(value.saturation), "0000") +
+	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) +
+	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }
 
 def setHue(value) {
-	def scaledHueValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+	//payload-> hue value, direction (00-> shortest distance), transition time (1/10th second)
-	zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, scaledHueValue, "00", "0500") + ["delay 1500"] + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE)      //payload-> hue value, direction (00-> shortest distance), transition time (1/10th second) (0500 in U16 reads 5)
+	zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, getScaledHue(value), "00", "0000") +
+	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE)
 }
 
 def setSaturation(value) {
-	def scaledSatValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+	//payload-> sat value, transition time
-	zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, scaledSatValue, "0500") + ["delay 1500"] + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)      //payload-> sat value, transition time
+	zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, getScaledSaturation(value), "0000") +
+	zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }

devicetypes/smartthings/zll-rgbw-bulb.src/zll-rgbw-bulb.groovy

@@ -1,5 +1,5 @@
 /**
- *  Copyright 2016 SmartThings
+ *  Copyright 2017 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -70,6 +70,7 @@ private getATTRIBUTE_HUE() { 0x0000 }
 private getATTRIBUTE_SATURATION() { 0x0001 }
 private getHUE_COMMAND() { 0x00 }
 private getSATURATION_COMMAND() { 0x03 }
+private getMOVE_TO_HUE_AND_SATURATION_COMMAND() { 0x06 }
 private getCOLOR_CONTROL_CLUSTER() { 0x0300 }
 private getATTRIBUTE_COLOR_TEMPERATURE() { 0x0007 }
 
@@ -88,11 +89,11 @@ def parse(String description) {
 
         if (zigbeeMap?.clusterInt == COLOR_CONTROL_CLUSTER) {
             if(zigbeeMap.attrInt == ATTRIBUTE_HUE){  //Hue Attribute
-                def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 360)
+                def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 0xfe * 100)
                 sendEvent(name: "hue", value: hueValue, displayed:false)
             }
             else if(zigbeeMap.attrInt == ATTRIBUTE_SATURATION){ //Saturation Attribute
-                def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
+                def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 0xfe * 100)
                 sendEvent(name: "saturation", value: saturationValue, displayed:false)
             }
         }
@@ -124,11 +125,16 @@ def configure() {
 }
 
 def configureAttributes() {
-    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, DataType.UINT8, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, DataType.UINT8, 1, 3600, 0x01)
+    zigbee.onOffConfig() +
+    zigbee.levelConfig()
 }
 
 def refreshAttributes() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh() + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
+    zigbee.onOffRefresh() +
+    zigbee.levelRefresh() +
+    zigbee.colorTemperatureRefresh() +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }
 
 def setColorTemperature(value) {
@@ -139,17 +145,32 @@ def setLevel(value) {
     zigbee.setLevel(value) + zigbee.onOffRefresh() + zigbee.levelRefresh()        //adding refresh because of ZLL bulb not conforming to send-me-a-report
 }
 
+private getScaledHue(value) {
+    zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+}
+
+private getScaledSaturation(value) {
+    zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+}
+
 def setColor(value){
     log.trace "setColor($value)"
-    zigbee.on() + setHue(value.hue) + ["delay 300"] + setSaturation(value.saturation) + ["delay 2000"] + refreshAttributes()
+    zigbee.on() +
+    zigbee.command(COLOR_CONTROL_CLUSTER, MOVE_TO_HUE_AND_SATURATION_COMMAND,
+        getScaledHue(value.hue), getScaledSaturation(value.saturation), "0000") +
+    zigbee.onOffRefresh() +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }
 
 def setHue(value) {
-    def scaledHueValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+    //payload-> hue value, direction (00-> shortest distance), transition time (1/10th second)
-    zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, scaledHueValue, "00", "0500") + ["delay 1500"] + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE)       //payload-> hue value, direction (00-> shortest distance), transition time (1/10th second) (0500 in U16 reads 5)
+    zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, getScaledHue(value), "00", "0000") +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE)
 }
 
 def setSaturation(value) {
-    def scaledSatValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+    //payload-> sat value, transition time
-    zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, scaledSatValue, "0500") + ["delay 1500"] + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)      //payload-> sat value, transition time
+    zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, getScaledSaturation(value), "0000") +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }

devicetypes/smartthings/zll-white-color-temperature-bulb-5000k.src/zll-white-color-temperature-bulb-5000k.groovy

@@ -1,5 +1,5 @@
 /**
- *  Copyright 2016 SmartThings
+ *  Copyright 2017 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -66,6 +66,11 @@ metadata {
     }
 }
 
+// Globals
+private getMOVE_TO_COLOR_TEMPERATURE_COMMAND() { 0x0A }
+private getCOLOR_CONTROL_CLUSTER() { 0x0300 }
+private getATTRIBUTE_COLOR_TEMPERATURE() { 0x0007 }
+
 // Parse incoming device messages to generate events
 def parse(String description) {
     log.debug "description is $description"
@@ -95,14 +100,14 @@ def setLevel(value) {
 }
 
 def refresh() {
-	def cmds = zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
+    def cmds = zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
 
-	// Do NOT config if the device is the Eaton Halo_LT01, it responds with "switch:off" to onOffConfig, and maybe other weird things with the others
+    // Do NOT config if the device is the Eaton Halo_LT01, it responds with "switch:off" to onOffConfig, and maybe other weird things with the others
     if (!((device.getDataValue("manufacturer") == "Eaton") && (device.getDataValue("model") == "Halo_LT01"))) {
-        cmds = cmds + zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig()
+        cmds += zigbee.onOffConfig() + zigbee.levelConfig()
     }
 
-	cmds
+    cmds
 }
 
 def poll() {
@@ -138,7 +143,7 @@ def configure() {
     log.debug "configure()"
     configureHealthCheck()
     // Implementation note: for the Eaton Halo_LT01, it responds with "switch:off" to onOffConfig, so be sure this is before the call to onOffRefresh
-    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
+    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
 }
 
 def updated() {
@@ -148,7 +153,12 @@ def updated() {
 
 def setColorTemperature(value) {
     setGenericName(value)
-    zigbee.setColorTemperature(value) + ["delay 1500"] + zigbee.colorTemperatureRefresh()
+    value = value as Integer
+    def tempInMired = (1000000 / value) as Integer
+    def finalHex = zigbee.swapEndianHex(zigbee.convertToHexString(tempInMired, 4))
+
+    zigbee.command(COLOR_CONTROL_CLUSTER, MOVE_TO_COLOR_TEMPERATURE_COMMAND, "$finalHex 0000") +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE)
 }
 
 //Naming based on the wiki article here: http://en.wikipedia.org/wiki/Color_temperature

devicetypes/smartthings/zll-white-color-temperature-bulb.src/zll-white-color-temperature-bulb.groovy

@@ -1,5 +1,5 @@
 /**
- *  Copyright 2016 SmartThings
+ *  Copyright 2017 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -68,6 +68,11 @@ metadata {
     }
 }
 
+// Globals
+private getMOVE_TO_COLOR_TEMPERATURE_COMMAND() { 0x0A }
+private getCOLOR_CONTROL_CLUSTER() { 0x0300 }
+private getATTRIBUTE_COLOR_TEMPERATURE() { 0x0007 }
+
 // Parse incoming device messages to generate events
 def parse(String description) {
     log.debug "description is $description"
@@ -94,7 +99,11 @@ def setLevel(value) {
 }
 
 def refresh() {
-    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh() + zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig()
+    zigbee.onOffRefresh() +
+    zigbee.levelRefresh() +
+    zigbee.colorTemperatureRefresh() +
+    zigbee.onOffConfig() +
+    zigbee.levelConfig()
 }
 
 def poll() {
@@ -129,8 +138,7 @@ def configureHealthCheck() {
 def configure() {
     log.debug "configure()"
     configureHealthCheck()
-    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
+    refresh()
-
 }
 
 def updated() {
@@ -140,7 +148,12 @@ def updated() {
 
 def setColorTemperature(value) {
     setGenericName(value)
-    zigbee.setColorTemperature(value) + ["delay 1500"] + zigbee.colorTemperatureRefresh()
+    value = value as Integer
+    def tempInMired = (1000000 / value) as Integer
+    def finalHex = zigbee.swapEndianHex(zigbee.convertToHexString(tempInMired, 4))
+
+    zigbee.command(COLOR_CONTROL_CLUSTER, MOVE_TO_COLOR_TEMPERATURE_COMMAND, "$finalHex 0000") +
+    zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE)
 }
 
 //Naming based on the wiki article here: http://en.wikipedia.org/wiki/Color_temperature

smartapps/gideon-api/gideon-smart-home.src/gideon-smart-home.groovy

@@ -765,7 +765,6 @@ def turnOffSwitch() {
         } else {
             
             device.off();
-                  
             return [Device_id: params.id, result_action: "200"]
         }
 }
@@ -789,6 +788,7 @@ def getTempSensorsStatus(id) {
             return []
         } else {
         	def bat = getBatteryStatus(device.id)
-        	return [temperature: device.currentValue('temperature')] + bat
+            def scale = [Scale: location.temperatureScale]
+        	return [temperature: device.currentValue('temperature')] + bat + scale
    		}
-   }
+   }

smartapps/naissan/lights-off-with-no-motion-and-presence.src/lights-off-with-no-motion-and-presence.groovy

@@ -15,66 +15,66 @@ definition(
 )
 
 preferences {
-	section("Light switches to turn off") {
+  section("Light switches to turn off") {
-		input "switches", "capability.switch", title: "Choose light switches", multiple: true
+    input "switches", "capability.switch", title: "Choose light switches", multiple: true
-	}
+  }
-	section("Turn off when there is no motion and presence") {
+  section("Turn off when there is no motion and presence") {
-		input "motionSensor", "capability.motionSensor", title: "Choose motion sensor"
+    input "motionSensor", "capability.motionSensor", title: "Choose motion sensor"
-   		input "presenceSensors", "capability.presenceSensor", title: "Choose presence sensors", multiple: true
+    input "presenceSensors", "capability.presenceSensor", title: "Choose presence sensors", multiple: true
-	}
+  }
-	section("Delay before turning off") {                    
+  section("Delay before turning off") {
-		input "delayMins", "number", title: "Minutes of inactivity?"
+    input "delayMins", "number", title: "Minutes of inactivity?"
-	}
+  }
 }
 
 def installed() {
-	subscribe(motionSensor, "motion", motionHandler)
+  subscribe(motionSensor, "motion", motionHandler)
-    subscribe(presenceSensors, "presence", presenceHandler)
+  subscribe(presenceSensors, "presence", presenceHandler)
 }
 
 def updated() {
-	unsubscribe()
+  unsubscribe()
-	subscribe(motionSensor, "motion", motionHandler)
+  subscribe(motionSensor, "motion", motionHandler)
-    subscribe(presenceSensors, "presence", presenceHandler)
+  subscribe(presenceSensors, "presence", presenceHandler)
 }
 
 def motionHandler(evt) {
-	log.debug "handler $evt.name: $evt.value"
+  log.debug "handler $evt.name: $evt.value"
-	if (evt.value == "inactive") {
+  if (evt.value == "inactive") {
-		runIn(delayMins * 60, scheduleCheck, [overwrite: false])
+    runIn(delayMins * 60, scheduleCheck, [overwrite: true])
-	}
+  }
 }
 
 def presenceHandler(evt) {
-	log.debug "handler $evt.name: $evt.value"
+  log.debug "handler $evt.name: $evt.value"
-	if (evt.value == "not present") {
+  if (evt.value == "not present") {
-		runIn(delayMins * 60, scheduleCheck, [overwrite: false])
+    runIn(delayMins * 60, scheduleCheck, [overwrite: true])
-	}
+  }
 }
 
 def isActivePresence() {
-	// check all the presence sensors, make sure none are present
+  // check all the presence sensors, make sure none are present
-	def noPresence = presenceSensors.find{it.currentPresence == "present"} == null
+  def noPresence = presenceSensors.find{it.currentPresence == "present"} == null
-	!noPresence		
+  !noPresence
 }
 
 def scheduleCheck() {
-	log.debug "scheduled check"
+  log.debug "scheduled check"
-	def motionState = motionSensor.currentState("motion")
+  def motionState = motionSensor.currentState("motion")
     if (motionState.value == "inactive") {
-        def elapsed = now() - motionState.rawDateCreated.time
+      def elapsed = now() - motionState.rawDateCreated.time
-    	def threshold = 1000 * 60 * delayMins - 1000
+      def threshold = 1000 * 60 * delayMins - 1000
-    	if (elapsed >= threshold) {
+      if (elapsed >= threshold) {
-        	if (!isActivePresence()) {
+        if (!isActivePresence()) {
-            	log.debug "Motion has stayed inactive since last check ($elapsed ms) and no presence:  turning lights off"
+          log.debug "Motion has stayed inactive since last check ($elapsed ms) and no presence:  turning lights off"
-            	switches.off()
+          switches.off()
-            } else {
+        } else {
-            	log.debug "Presence is active: do nothing"
+          log.debug "Presence is active: do nothing"
-            }
-    	} else {
-        	log.debug "Motion has not stayed inactive long enough since last check ($elapsed ms): do nothing"
         }
+      } else {
+        log.debug "Motion has not stayed inactive long enough since last check ($elapsed ms): do nothing"
+      }
     } else {
-    	log.debug "Motion is active: do nothing"
+      log.debug "Motion is active: do nothing"
     }
-}
+}

smartapps/opent2t/opent2t-smartapp-test.src/opent2t-smartapp-test.groovy

@@ -1,3 +1,7 @@
+import javax.crypto.Mac;
+import javax.crypto.spec.SecretKeySpec;
+import java.security.InvalidKeyException;
+
 /**
  *  OpenT2T SmartApp Test
  *
@@ -39,7 +43,7 @@ definition(
  *  garageDoors         | door          | open, close           | unknown, closed, open, closing, opening
  *  cameras             | image         | take                  | <String>
  *  thermostats         | thermostat    | setHeatingSetpoint,   | temperature, heatingSetpoint, coolingSetpoint,
- *	                    |				| setCoolingSetpoint,   | thermostatSetpoint, thermostatMode,
+ * 	                    |				| setCoolingSetpoint,   | thermostatSetpoint, thermostatMode,
  *                      |				| off, heat, cool, auto,| thermostatFanMode, thermostatOperatingState
  *                      |				| emergencyHeat,        |
  *                      |				| setThermostatMode,    |
@@ -55,7 +59,7 @@ preferences {
 		input "contactSensors", "capability.contactSensor", title: "Which Contact Sensors", multiple: true, required: false, hideWhenEmpty: true
 		input "garageDoors", "capability.garageDoorControl", title: "Which Garage Doors?", multiple: true, required: false, hideWhenEmpty: true
 		input "locks", "capability.lock", title: "Which Locks?", multiple: true, required: false, hideWhenEmpty: true
-		input "cameras", "capability.videoCapture", title: "Which Cameras?",  multiple: true, required: false, hideWhenEmpty: true
+		input "cameras", "capability.videoCapture", title: "Which Cameras?", multiple: true, required: false, hideWhenEmpty: true
 		input "motionSensors", "capability.motionSensor", title: "Which Motion Sensors?", multiple: true, required: false, hideWhenEmpty: true
 		input "presenceSensors", "capability.presenceSensor", title: "Which Presence Sensors", multiple: true, required: false, hideWhenEmpty: true
 		input "switches", "capability.switch", title: "Which Switches and Lights?", multiple: true, required: false, hideWhenEmpty: true
@@ -66,44 +70,49 @@ preferences {
 
 def getInputs() {
 	def inputList = []
-	inputList += contactSensors?: []
+	inputList += contactSensors ?: []
-	inputList += garageDoors?: []
+	inputList += garageDoors ?: []
-	inputList += locks?: []
+	inputList += locks ?: []
-	inputList += cameras?: []
+	inputList += cameras ?: []
-	inputList += motionSensors?: []
+	inputList += motionSensors ?: []
-	inputList += presenceSensors?: []
+	inputList += presenceSensors ?: []
-	inputList += switches?: []
+	inputList += switches ?: []
-	inputList += thermostats?: []
+	inputList += thermostats ?: []
-	inputList += waterSensors?: []
+	inputList += waterSensors ?: []
 	return inputList
 }
 
 //API external Endpoints
 mappings {
 	path("/devices") {
-		action: [
+		action:
+		[
 				GET: "getDevices"
 		]
 	}
 	path("/devices/:id") {
-		action: [
+		action:
+		[
 				GET: "getDevice"
 		]
 	}
 	path("/update/:id") {
-		action: [
+		action:
+		[
 				PUT: "updateDevice"
 		]
 	}
 	path("/deviceSubscription") {
-		action: [
+		action:
-				POST: "registerDeviceChange",
+		[
+				POST  : "registerDeviceChange",
 				DELETE: "unregisterDeviceChange"
 		]
 	}
 	path("/locationSubscription") {
-		action: [
+		action:
-				POST: "registerDeviceGraph",
+		[
+				POST  : "registerDeviceGraph",
 				DELETE: "unregisterDeviceGraph"
 		]
 	}
@@ -116,14 +125,21 @@ def installed() {
 
 def updated() {
 	log.debug "Updating with settings: ${settings}"
-	if(state.deviceSubscriptionMap == null){
+
+	//Initialize state variables if didn't exist.
+	if (state.deviceSubscriptionMap == null) {
 		state.deviceSubscriptionMap = [:]
 		log.debug "deviceSubscriptionMap created."
 	}
-	if( state.locationSubscriptionMap == null){
+	if (state.locationSubscriptionMap == null) {
 		state.locationSubscriptionMap = [:]
 		log.debug "locationSubscriptionMap created."
 	}
+	if (state.verificationKeyMap == null) {
+		state.verificationKeyMap = [:]
+		log.debug "verificationKeyMap created."
+	}
+
 	unsubscribe()
 	registerAllDeviceSubscriptions()
 }
@@ -132,9 +148,11 @@ def initialize() {
 	log.debug "Initializing with settings: ${settings}"
 	state.deviceSubscriptionMap = [:]
 	log.debug "deviceSubscriptionMap created."
-	registerAllDeviceSubscriptions()
 	state.locationSubscriptionMap = [:]
 	log.debug "locationSubscriptionMap created."
+	state.verificationKeyMap = [:]
+	log.debug "verificationKeyMap created."
+	registerAllDeviceSubscriptions()
 }
 
 /*** Subscription Functions  ***/
@@ -148,7 +166,7 @@ def registerAllDeviceSubscriptions() {
 def registerChangeHandler(myList) {
 	myList.each { myDevice ->
 		def theAtts = myDevice.supportedAttributes
-		theAtts.each {att ->
+		theAtts.each { att ->
 			subscribe(myDevice, att.name, deviceEventHandler)
 			log.info "Registering for ${myDevice.displayName}.${att.name}"
 		}
@@ -160,31 +178,38 @@ def registerDeviceChange() {
 	def subscriptionEndpt = params.subscriptionURL
 	def deviceId = params.deviceId
 	def myDevice = findDevice(deviceId)
-	if( myDevice == null ){
+
+	if (myDevice == null) {
 		httpError(404, "Cannot find device with device ID ${deviceId}.")
 	}
 
 	def theAtts = myDevice.supportedAttributes
 	try {
-		theAtts.each {att ->
+		theAtts.each { att ->
 			subscribe(myDevice, att.name, deviceEventHandler)
 		}
 		log.info "Subscribing for ${myDevice.displayName}"
 
-		if(subscriptionEndpt != null){
+		if (subscriptionEndpt != null) {
-			if(state.deviceSubscriptionMap[deviceId] == null){
+			if (state.deviceSubscriptionMap[deviceId] == null) {
 				state.deviceSubscriptionMap.put(deviceId, [subscriptionEndpt])
 				log.info "Added subscription URL: ${subscriptionEndpt} for ${myDevice.displayName}"
-			} else if (!state.deviceSubscriptionMap[deviceId].contains(subscriptionEndpt)){
+			} else if (!state.deviceSubscriptionMap[deviceId].contains(subscriptionEndpt)) {
 				state.deviceSubscriptionMap[deviceId] << subscriptionEndpt
 				log.info "Added subscription URL: ${subscriptionEndpt} for ${myDevice.displayName}"
 			}
+
+			if (params.key != null) {
+				state.verificationKeyMap[subscriptionEndpt] = params.key
+				log.info "Added verification key: ${params.key} for ${subscriptionEndpt}"
+			}
 		}
 	} catch (e) {
 		httpError(500, "something went wrong: $e")
 	}
 
 	log.info "Current subscription map is ${state.deviceSubscriptionMap}"
+	log.info "Current verification key map is ${state.verificationKeyMap}"
 	return ["succeed"]
 }
 
@@ -194,18 +219,19 @@ def unregisterDeviceChange() {
 	def deviceId = params.deviceId
 	def myDevice = findDevice(deviceId)
 
-	if( myDevice == null ){
+	if (myDevice == null) {
 		httpError(404, "Cannot find device with device ID ${deviceId}.")
 	}
 
 	try {
-		if(subscriptionEndpt != null && subscriptionEndpt != "undefined"){
+		if (subscriptionEndpt != null && subscriptionEndpt != "undefined") {
-			if (state.deviceSubscriptionMap[deviceId]?.contains(subscriptionEndpt)){
+			if (state.deviceSubscriptionMap[deviceId]?.contains(subscriptionEndpt)) {
-				if(state.deviceSubscriptionMap[deviceId].size() == 1){
+				if (state.deviceSubscriptionMap[deviceId].size() == 1) {
 					state.deviceSubscriptionMap.remove(deviceId)
 				} else {
 					state.deviceSubscriptionMap[deviceId].remove(subscriptionEndpt)
 				}
+				state.verificationKeyMap.remove(subscriptionEndpt)
 				log.info "Removed subscription URL: ${subscriptionEndpt} for ${myDevice.displayName}"
 			}
 		} else {
@@ -217,25 +243,33 @@ def unregisterDeviceChange() {
 	}
 
 	log.info "Current subscription map is ${state.deviceSubscriptionMap}"
+	log.info "Current verification key map is ${state.verificationKeyMap}"
 }
 
 //Endpoints function: Subscribe to device additiona/removal updated in a location
 def registerDeviceGraph() {
 	def subscriptionEndpt = params.subscriptionURL
 
-	if (subscriptionEndpt != null && subscriptionEndpt != "undefined"){
+	if (subscriptionEndpt != null && subscriptionEndpt != "undefined") {
 		subscribe(location, "DeviceCreated", locationEventHandler, [filterEvents: false])
 		subscribe(location, "DeviceUpdated", locationEventHandler, [filterEvents: false])
 		subscribe(location, "DeviceDeleted", locationEventHandler, [filterEvents: false])
 
-		if(state.locationSubscriptionMap[location.id] == null){
+		if (state.locationSubscriptionMap[location.id] == null) {
 			state.locationSubscriptionMap.put(location.id, [subscriptionEndpt])
 			log.info "Added subscription URL: ${subscriptionEndpt} for Location ${location.name}"
-		} else if (!state.locationSubscriptionMap[location.id].contains(subscriptionEndpt)){
+		} else if (!state.locationSubscriptionMap[location.id].contains(subscriptionEndpt)) {
 			state.locationSubscriptionMap[location.id] << subscriptionEndpt
 			log.info "Added subscription URL: ${subscriptionEndpt} for Location ${location.name}"
 		}
+
+		if (params.key != null) {
+			state.verificationKeyMap[subscriptionEndpt] = params.key
+			log.info "Added verification key: ${params.key} for ${subscriptionEndpt}"
+		}
+
 		log.info "Current location subscription map is ${state.locationSubscriptionMap}"
+		log.info "Current verification key map is ${state.verificationKeyMap}"
 		return ["succeed"]
 	} else {
 		httpError(400, "missing input parameter: subscriptionURL")
@@ -247,16 +281,17 @@ def unregisterDeviceGraph() {
 	def subscriptionEndpt = params.subscriptionURL
 
 	try {
-		if(subscriptionEndpt != null && subscriptionEndpt != "undefined"){
+		if (subscriptionEndpt != null && subscriptionEndpt != "undefined") {
-			if (state.locationSubscriptionMap[location.id]?.contains(subscriptionEndpt)){
+			if (state.locationSubscriptionMap[location.id]?.contains(subscriptionEndpt)) {
-				if(state.locationSubscriptionMap[location.id].size() == 1){
+				if (state.locationSubscriptionMap[location.id].size() == 1) {
 					state.locationSubscriptionMap.remove(location.id)
 				} else {
 					state.locationSubscriptionMap[location.id].remove(subscriptionEndpt)
 				}
+				state.verificationKeyMap.remove(subscriptionEndpt)
 				log.info "Removed subscription URL: ${subscriptionEndpt} for Location ${location.name}"
 			}
-		}else{
+		} else {
 			httpError(400, "missing input parameter: subscriptionURL")
 		}
 	} catch (e) {
@@ -264,28 +299,40 @@ def unregisterDeviceGraph() {
 	}
 
 	log.info "Current location subscription map is ${state.locationSubscriptionMap}"
+	log.info "Current verification key map is ${state.verificationKeyMap}"
 }
 
 //When events are triggered, send HTTP post to web socket servers
 def deviceEventHandler(evt) {
-	def evt_device = evt.device
+	def evtDevice = evt.device
-	def evt_deviceType = getDeviceType(evt_device)
+	def evtDeviceType = getDeviceType(evtDevice)
-	def deviceInfo
+	def deviceData = [];
 
-	def params = [ body: [deviceName: evt_device.displayName, deviceId: evt_device.id,  locationId: location.id] ]
+	if (evt.data != null) {
-
-	if(evt.data != null){
 		def evtData = parseJson(evt.data)
-		log.info "Received event for ${evt_device.displayName}, data: ${evtData},  description: ${evt.descriptionText}"
+		log.info "Received event for ${evtDevice.displayName}, data: ${evtData},  description: ${evt.descriptionText}"
 	}
 
+	if (evtDeviceType == "thermostat") {
+		deviceData = [name: evtDevice.displayName, id: evtDevice.id, status: evtDevice.status, deviceType: evtDeviceType, manufacturer: evtDevice.manufacturerName, model: evtDevice.modelName, attributes: deviceAttributeList(evtDevice, evtDeviceType), locationMode: getLocationModeInfo(), locationId: location.id]
+	} else {
+		deviceData = [name: evtDevice.displayName, id: evtDevice.id, status: evtDevice.status, deviceType: evtDeviceType, manufacturer: evtDevice.manufacturerName, model: evtDevice.modelName, attributes: deviceAttributeList(evtDevice, evtDeviceType), locationId: location.id]
+	}
+
+	def params = [body: deviceData]
+
 	//send event to all subscriptions urls
-	log.debug "Current subscription urls for ${evt_device.displayName} is ${state.deviceSubscriptionMap[evt_device.id]}"
+	log.debug "Current subscription urls for ${evtDevice.displayName} is ${state.deviceSubscriptionMap[evtDevice.id]}"
-	state.deviceSubscriptionMap[evt_device.id].each {
+	state.deviceSubscriptionMap[evtDevice.id].each {
 		params.uri = "${it}"
+		if (state.verificationKeyMap[it] != null) {
+			def key = state.verificationKeyMap[it]
+			params.header = [Signature: ComputHMACValue(key, groovy.json.JsonOutput.toJson(params.body))]
+		}
 		log.trace "POST URI: ${params.uri}"
+		log.trace "Header: ${params.header}"
 		log.trace "Payload: ${params.body}"
-		try{
+		try {
 			httpPostJson(params) { resp ->
 				log.trace "response status code: ${resp.status}"
 				log.trace "response data: ${resp.data}"
@@ -298,20 +345,27 @@ def deviceEventHandler(evt) {
 
 def locationEventHandler(evt) {
 	log.info "Received event for location ${location.name}/${location.id}, Event: ${evt.name}, description: ${evt.descriptionText}, apiServerUrl: ${apiServerUrl("")}"
-	switch(evt.name){
+	switch (evt.name) {
 		case "DeviceCreated":
 		case "DeviceDeleted":
-			def evt_device = evt.device
+			def evtDevice = evt.device
-			def evt_deviceType = getDeviceType(evt_device)
+			def evtDeviceType = getDeviceType(evtDevice)
-			log.info "DeviceName: ${evt_device.displayName}, DeviceID: ${evt_device.id}, deviceType: ${evt_deviceType}"
+			def params = [body: [eventType: evt.name, deviceId: evtDevice.id, locationId: location.id]]
 
-			def params = [ body: [ eventType:evt.name, deviceId: evt_device.id, locationId: location.id ] ]
+			if (evt.name == "DeviceDeleted" && state.deviceSubscriptionMap[deviceId] != null) {
+				state.deviceSubscriptionMap.remove(evtDevice.id)
+			}
 
 			state.locationSubscriptionMap[location.id].each {
 				params.uri = "${it}"
+				if (state.verificationKeyMap[it] != null) {
+					def key = state.verificationKeyMap[it]
+					params.header = [Signature: ComputHMACValue(key, groovy.json.JsonOutput.toJson(params.body))]
+				}
 				log.trace "POST URI: ${params.uri}"
+				log.trace "Header: ${params.header}"
 				log.trace "Payload: ${params.body}"
-				try{
+				try {
 					httpPostJson(params) { resp ->
 						log.trace "response status code: ${resp.status}"
 						log.trace "response data: ${resp.data}"
@@ -326,6 +380,23 @@ def locationEventHandler(evt) {
 	}
 }
 
+private ComputHMACValue(key, data) {
+	try {
+		SecretKeySpec secretKeySpec = new SecretKeySpec(key.getBytes("UTF-8"), "HmacSHA1")
+		Mac mac = Mac.getInstance("HmacSHA1")
+		mac.init(secretKeySpec)
+		byte[] digest = mac.doFinal(data.getBytes("UTF-8"))
+		return byteArrayToString(digest)
+	} catch (InvalidKeyException e) {
+		log.error "Invalid key exception while converting to HMac SHA1"
+	}
+}
+
+private def byteArrayToString(byte[] data) {
+	BigInteger bigInteger = new BigInteger(1, data)
+	String hash = bigInteger.toString(16)
+	return hash
+}
 
 /*** Device Query/Update Functions  ***/
 
@@ -334,10 +405,10 @@ def getDevices() {
 	def deviceData = []
 	inputs?.each {
 		def deviceType = getDeviceType(it)
-		if(deviceType == "thermostat") {
+		if (deviceType == "thermostat") {
-			deviceData << [name: it.displayName, id: it.id, status:it.status, deviceType:deviceType, manufacturer:it.manufacturerName, model:it.modelName, attributes: deviceAttributeList(it, deviceType), locationMode: getLocationModeInfo()]
+			deviceData << [name: it.displayName, id: it.id, status: it.status, deviceType: deviceType, manufacturer: it.manufacturerName, model: it.modelName, attributes: deviceAttributeList(it, deviceType), locationMode: getLocationModeInfo()]
 		} else {
-			deviceData << [name: it.displayName, id: it.id, status:it.status, deviceType:deviceType, manufacturer:it.manufacturerName, model:it.modelName, attributes: deviceAttributeList(it, deviceType)]
+			deviceData << [name: it.displayName, id: it.id, status: it.status, deviceType: deviceType, manufacturer: it.manufacturerName, model: it.modelName, attributes: deviceAttributeList(it, deviceType)]
 		}
 	}
 
@@ -350,10 +421,10 @@ def getDevice() {
 	def it = findDevice(params.id)
 	def deviceType = getDeviceType(it)
 	def device
-	if(deviceType == "thermostat") {
+	if (deviceType == "thermostat") {
-		device = [name: it.displayName, id: it.id, status:it.status, deviceType:deviceType, manufacturer:it.manufacturerName, model:it.modelName, attributes: deviceAttributeList(it,deviceType), locationMode: getLocationModeInfo()]
+		device = [name: it.displayName, id: it.id, status: it.status, deviceType: deviceType, manufacturer: it.manufacturerName, model: it.modelName, attributes: deviceAttributeList(it, deviceType), locationMode: getLocationModeInfo()]
 	} else {
-		device = [name: it.displayName, id: it.id, status:it.status, deviceType:deviceType, manufacturer:it.manufacturerName, model:it.modelName, attributes: deviceAttributeList(it, deviceType)]
+		device = [name: it.displayName, id: it.id, status: it.status, deviceType: deviceType, manufacturer: it.manufacturerName, model: it.modelName, attributes: deviceAttributeList(it, deviceType)]
 	}
 
 	log.debug "getDevice, return: ${device}"
@@ -366,18 +437,18 @@ void updateDevice() {
 	request.JSON.each {
 		def command = it.key
 		def value = it.value
-		if (command){
+		if (command) {
 			def commandList = mapDeviceCommands(command, value)
 			command = commandList[0]
 			value = commandList[1]
 
 			if (command == "setAwayMode") {
 				log.info "Setting away mode to ${value}"
-				if (location.modes?.find {it.name == value}) {
+				if (location.modes?.find { it.name == value }) {
 					location.setMode(value)
 				}
-			}else if (command == "thermostatSetpoint"){
+			} else if (command == "thermostatSetpoint") {
-				switch(device.currentThermostatMode){
+				switch (device.currentThermostatMode) {
 					case "cool":
 						log.info "Update: ${device.displayName}, [${command}, ${value}]"
 						device.setCoolingSetpoint(value)
@@ -391,7 +462,7 @@ void updateDevice() {
 						httpError(501, "this mode: ${device.currentThermostatMode} does not allow changing thermostat setpoint.")
 						break
 				}
-			}else if (!device) {
+			} else if (!device) {
 				log.error "updateDevice, Device not found"
 				httpError(404, "Device not found")
 			} else if (!device.hasCommand(command)) {
@@ -401,11 +472,11 @@ void updateDevice() {
 				if (command == "setColor") {
 					log.info "Update: ${device.displayName}, [${command}, ${value}]"
 					device."$command"(hex: value)
-				} else if(value.isNumber()) {
+				} else if (value.isNumber()) {
 					def intValue = value as Integer
 					log.info "Update: ${device.displayName}, [${command}, ${intValue}(int)]"
 					device."$command"(intValue)
-				} else if (value){
+				} else if (value) {
 					log.info "Update: ${device.displayName}, [${command}, ${value}]"
 					device."$command"(value)
 				} else {
@@ -432,17 +503,16 @@ private getDeviceType(device) {
 	log.debug "supported commands: [${device}, ${device.supportedCommands}]"
 
 	//Loop through the device capability list to determine the device type.
-	capabilities.each {capability ->
+	capabilities.each { capability ->
-		switch(capability.name.toLowerCase())
+		switch (capability.name.toLowerCase()) {
-		{
 			case "switch":
 				deviceType = "switch"
 
 				//If the device also contains "Switch Level" capability, identify it as a "light" device.
-				if (capabilities.any{it.name.toLowerCase() == "switch level"}){
+				if (capabilities.any { it.name.toLowerCase() == "switch level" }) {
 
 					//If the device also contains "Power Meter" capability, identify it as a "dimmerSwitch" device.
-					if (capabilities.any{it.name.toLowerCase() == "power meter"}){
+					if (capabilities.any { it.name.toLowerCase() == "power meter" }) {
 						deviceType = "dimmerSwitch"
 						return deviceType
 					} else {
@@ -489,24 +559,24 @@ private deviceAttributeList(device, deviceType) {
 	allAttributes.each { attribute ->
 		try {
 			def currentState = device.currentState(attribute.name)
-			if(currentState != null ){
+			if (currentState != null) {
-				switch(attribute.name){
+				switch (attribute.name) {
 					case 'temperature':
-						attributeList.putAll([ (attribute.name): currentState.value, 'temperatureScale':location.temperatureScale ])
+						attributeList.putAll([(attribute.name): currentState.value, 'temperatureScale': location.temperatureScale])
 						break;
 					default:
-						attributeList.putAll([(attribute.name): currentState.value ])
+						attributeList.putAll([(attribute.name): currentState.value])
 						break;
 				}
-				if( deviceType == "genericSensor" ){
+				if (deviceType == "genericSensor") {
 					def key = attribute.name + "_lastUpdated"
-					attributeList.putAll([ (key): currentState.isoDate ])
+					attributeList.putAll([(key): currentState.isoDate])
 				}
 			} else {
-				attributeList.putAll([ (attribute.name): null ]);
+				attributeList.putAll([(attribute.name): null]);
 			}
-		} catch(e) {
+		} catch (e) {
-			attributeList.putAll([ (attribute.name): null ]);
+			attributeList.putAll([(attribute.name): null]);
 		}
 	}
 	return attributeList
@@ -579,8 +649,7 @@ private mapDeviceCommands(command, value) {
 			if (value == 1 || value == "1" || value == "lock") {
 				resultCommand = "lock"
 				resultValue = ""
-			}
+			} else if (value == 0 || value == "0" || value == "unlock") {
-			else if (value == 0 || value == "0" || value == "unlock") {
 				resultCommand = "unlock"
 				resultValue = ""
 			}
@@ -589,5 +658,5 @@ private mapDeviceCommands(command, value) {
 			break
 	}
 
-	return [resultCommand,resultValue]
+	return [resultCommand, resultValue]
 }

smartapps/smartthings/left-it-open.src/left-it-open.groovy

@@ -27,84 +27,82 @@ definition(
 
 preferences {
 
-	section("Monitor this door or window") {
+  section("Monitor this door or window") {
-		input "contact", "capability.contactSensor"
+    input "contact", "capability.contactSensor"
-	}
+  }
-	section("And notify me if it's open for more than this many minutes (default 10)") {
+
-		input "openThreshold", "number", description: "Number of minutes", required: false
+  section("And notify me if it's open for more than this many minutes (default 10)") {
-	}
+    input "openThreshold", "number", description: "Number of minutes", required: false
-    section("Delay between notifications (default 10 minutes") {
+  }
-        input "frequency", "number", title: "Number of minutes", description: "", required: false
+
+  section("Delay between notifications (default 10 minutes") {
+    input "frequency", "number", title: "Number of minutes", description: "", required: false
+  }
+
+  section("Via text message at this number (or via push notification if not specified") {
+    input("recipients", "contact", title: "Send notifications to") {
+      input "phone", "phone", title: "Phone number (optional)", required: false
     }
-	section("Via text message at this number (or via push notification if not specified") {
+  }
-        input("recipients", "contact", title: "Send notifications to") {
-            input "phone", "phone", title: "Phone number (optional)", required: false
-        }
-	}
 }
 
 def installed() {
-	log.trace "installed()"
+  log.trace "installed()"
-	subscribe()
+  subscribe()
 }
 
 def updated() {
-	log.trace "updated()"
+  log.trace "updated()"
-	unsubscribe()
+  unsubscribe()
-	subscribe()
+  subscribe()
 }
 
 def subscribe() {
-	subscribe(contact, "contact.open", doorOpen)
+  subscribe(contact, "contact.open", doorOpen)
-	subscribe(contact, "contact.closed", doorClosed)
+  subscribe(contact, "contact.closed", doorClosed)
 }
 
-def doorOpen(evt)
+def doorOpen(evt) {
-{
+  log.trace "doorOpen($evt.name: $evt.value)"
-	log.trace "doorOpen($evt.name: $evt.value)"
+  def delay = (openThreshold != null && openThreshold != "") ? openThreshold * 60 : 600
-	def t0 = now()
+  runIn(delay, doorOpenTooLong, [overwrite: true])
-	def delay = (openThreshold != null && openThreshold != "") ? openThreshold * 60 : 600
-	runIn(delay, doorOpenTooLong, [overwrite: false])
-	log.debug "scheduled doorOpenTooLong in ${now() - t0} msec"
 }
 
-def doorClosed(evt)
+def doorClosed(evt) {
-{
+  log.trace "doorClosed($evt.name: $evt.value)"
-	log.trace "doorClosed($evt.name: $evt.value)"
+  unschedule(doorOpenTooLong)
 }
 
 def doorOpenTooLong() {
-	def contactState = contact.currentState("contact")
+  def contactState = contact.currentState("contact")
-    def freq = (frequency != null && frequency != "") ? frequency * 60 : 600
+  def freq = (frequency != null && frequency != "") ? frequency * 60 : 600
 
-	if (contactState.value == "open") {
+  if (contactState.value == "open") {
-		def elapsed = now() - contactState.rawDateCreated.time
+    def elapsed = now() - contactState.rawDateCreated.time
-		def threshold = ((openThreshold != null && openThreshold != "") ? openThreshold * 60000 : 60000) - 1000
+    def threshold = ((openThreshold != null && openThreshold != "") ? openThreshold * 60000 : 60000) - 1000
-		if (elapsed >= threshold) {
+    if (elapsed >= threshold) {
-			log.debug "Contact has stayed open long enough since last check ($elapsed ms):  calling sendMessage()"
+      log.debug "Contact has stayed open long enough since last check ($elapsed ms):  calling sendMessage()"
-			sendMessage()
+      sendMessage()
-            runIn(freq, doorOpenTooLong, [overwrite: false])
+      runIn(freq, doorOpenTooLong, [overwrite: false])
-		} else {
+    } else {
-			log.debug "Contact has not stayed open long enough since last check ($elapsed ms):  doing nothing"
+      log.debug "Contact has not stayed open long enough since last check ($elapsed ms):  doing nothing"
-		}
+    }
-	} else {
+  } else {
-		log.warn "doorOpenTooLong() called but contact is closed:  doing nothing"
+    log.warn "doorOpenTooLong() called but contact is closed:  doing nothing"
-	}
+  }
 }
 
-void sendMessage()
+void sendMessage() {
-{
+  def minutes = (openThreshold != null && openThreshold != "") ? openThreshold : 10
-	def minutes = (openThreshold != null && openThreshold != "") ? openThreshold : 10
+  def msg = "${contact.displayName} has been left open for ${minutes} minutes."
-	def msg = "${contact.displayName} has been left open for ${minutes} minutes."
+  log.info msg
-	log.info msg
+  if (location.contactBookEnabled) {
-    if (location.contactBookEnabled) {
+    sendNotificationToContacts(msg, recipients)
-        sendNotificationToContacts(msg, recipients)
+  } else {
-    }
+    if (phone) {
-    else {
+      sendSms phone, msg
-        if (phone) {
+    } else {
-            sendSms phone, msg
+      sendPush msg
-        } else {
-            sendPush msg
-        }
     }
+  }
 }

smartapps/torick-net/smartthingstostart.src/smartthingstostart.groovy

@@ -0,0 +1,373 @@
+/**
+ *  SmartThingsToStart REST Api
+ *
+ *  Copyright 2017 Dr1rrb
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *	  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+definition(
+	name: "SmartThingsToStart",
+	namespace: "torick.net",
+	author: "Dr1rrb",
+	description: "SmartThingsToStart REST Api",
+	category: "My Apps",
+	iconUrl: "http://smartthingstostartproxy.azurewebsites.net/Assets/AppLogo.png",
+	iconX2Url: "http://smartthingstostartproxy.azurewebsites.net/Assets/AppLogo@2X.png",
+	iconX3Url: "http://smartthingstostartproxy.azurewebsites.net/Assets/AppLogo@3X.png",
+	oauth: true)
+
+
+preferences {
+	section("Control these devices") {
+		input "switches", "capability.switch", title: "Select switches", multiple: true, required: false
+		input "bubls", "capability.bulb", title: "Select bubls", hideWhenEmpty: true, multiple: true, required: false
+		input "lights", "capability.light", title: "Select lights", hideWhenEmpty: true, multiple: true, required: false
+		input "outlets", "capability.outlet", title: "Select outlets", hideWhenEmpty: true, multiple: true, required: false
+		input "relaySwitches", "capability.relaySwitch", title: "Select relay switches", hideWhenEmpty: true, multiple: true, required: false
+	}
+}
+
+mappings {
+	path("/infos") {
+		action: [GET: "retreiveServerInfos"]
+  	}
+    path("/items") {
+		action: [GET: "retreiveDevicesAndRoutines"]
+  	}
+	path("/device/:id") {
+		action: [GET: "retreiveDevice"]
+	}
+	path("/device/:id/subscription/:subscriptionId") {
+		action: [
+			PUT: "updateOrCreateSubscription",
+			POST: "updateOrCreateSubscription",
+		]
+	}
+    // TODO
+	//path("/device/:id/unsubscribe") {
+	//	action: [POST: "unsubscribeFromDevice"]
+	//}
+	path("/device/:id/:command") {
+		action: [ PUT: "updateDevice" ]
+	}
+    path("/routine/:id/execute") {
+		action: [PUT: "executeRoutine"]
+	}
+}
+
+// Region: App lifecycle
+def installed() {
+	log.debug "Installed with settings: ${settings}"
+
+	initialize()
+}
+
+def updated() {
+	log.debug "Updated with settings: ${settings}"
+
+	unsubscribe()
+    //state.pushChannels = [:]
+	initialize()
+}
+
+def initialize() {
+	def channels = state.pushChannels = state.pushChannels ?: [:];
+	channels.each 
+	{ 
+		def device = findDevice(it.key);
+		if (device != null)
+		{
+			subscribeToDevice(device);
+		}
+	}
+}
+
+
+// Region: Http request handlers
+def retreiveServerInfos()
+{
+	return [version: 1]
+}
+
+def retreiveDevicesAndRoutines() {
+	def details = params.details == "true" ? true : false;
+
+	return [
+		devices: getDevices().collect { getDeviceInfos(it, details) }, 
+		routines: location.helloHome?.getPhrases().collect { getRoutineInfos(it, details) }
+	];
+}
+
+def retreiveDevice() {
+	def device = getDevice(params.id);
+	def details = params.details == "true" ? true : false;
+	
+	return getDeviceInfos(device, details);
+}
+
+def updateOrCreateSubscription() {
+	def device = getDevice(params.id);
+	def channelUri = notNull("channelUri", request.JSON?.channelUri);
+	def token = notNull("token", request.JSON?.token);
+	
+	log.debug "Subscribing to device '${device.id}' (target: '${channelUri}' / token: '${token}')"
+
+	// Get or create the push notification channel from / into the local state
+	def subscriptionId = params.subscriptionId ?: UUID.randomUUID().toString() ;
+	def allSubscriptions = state.pushChannels ?: (state.pushChannels = [:]);
+	def deviceSubscriptions = allSubscriptions[device.id] ?: (allSubscriptions[device.id] = []);
+	def subscription = deviceSubscriptions.find { it.id == subscriptionId };
+	if (subscription == null)
+	{
+		deviceSubscriptions << [
+			id: subscriptionId,
+			deviceId: device.id,
+			channelUri: channelUri,
+			token: token
+		];
+	}
+	else
+	{
+		subscription["channelUri"] = channelUri;
+		subscription["token"]  = token;
+	}
+	
+	log.debug "Active subscriptions: \n" + state.pushChannels.collect { "** Device ${it.key} **\n" + it.value.collect{c -> "- - - > ${c.channelUri} : ${c.token.substring(0, 10)}..."}.join('\n') + "\n***************************" }.join('\n\n')
+	
+	// (Re)create the subscription(s)
+	subscribeToDevice(device)
+
+	return [subscriptionId: subscriptionId];
+}
+
+def subscribeToDevice(device)
+{
+	log.debug "Subscribing to device '${device.id}'"
+
+	unsubscribe(device);
+	subscribe(device, "switch", switchStateChanged)
+
+	if (device.hasCapability("Color Control"))
+	{
+		log.debug "Device '${device.id}' has also the color capability. Subscribe to it."
+		subscribe(device, "color", colorStateChanged)
+	}
+}
+
+def switchStateChanged(eventArgs) { sendPushNotification("switch", eventArgs) }
+def colorStateChanged(eventArgs) { sendPushNotification("color", eventArgs) }
+
+def updateDevice() {
+	def device = getDevice(params.id)
+	def command = notNull("command", params.command)
+	
+	log.debug "Executing '${command}' on device '${device.id}'."
+	
+	switch(command) {
+		case "on":
+		case "On":
+			device.on()
+			break
+
+		case "off":
+		case "Off":
+			device.off()
+			break
+
+		case "toggle":
+		case "Toggle":
+			if (device.currentSwitch == "on")
+				device.off();
+			else
+				device.on();
+			break;
+
+		default:
+			httpError(501, "'${command}' is not a valid command for '${device.id}'")
+	}
+	
+	return getDeviceInfos(device);
+}
+
+def executeRoutine() {
+	def routine = getRoutine(params.id);
+    log.debug "Executing routine '${routine.id}' (${routine.label})"
+    
+    location.helloHome?.execute(routine.id)
+}
+
+// Region: Get device
+def getDevices()
+{
+	return switches
+		+ bubls
+		+ lights
+		+ outlets
+		+ relaySwitches;
+}
+
+def findDevice(deviceId)
+{
+	notNull("deviceId", deviceId);
+	
+	return getDevices().find { it.id == deviceId };
+}
+
+def getDevice(deviceId)
+{
+	def device = findDevice(deviceId);
+	if (device == null)
+	{
+		httpError(404, "Device '${deviceId}' not found.")
+	}
+	return device;
+}
+
+// Region: Get routine
+def findRoutine(routineId)
+{
+	return location.helloHome?.getPhrases().find{ it.id == routineId};
+}
+
+def getRoutine(routineId)
+{
+	def routine = findRoutine(routineId);
+	if (routine == null)
+	{
+		httpError(404, "Routine '${routineId}' not found.")
+	}
+	return routine;
+}
+
+// Region: Parameters assertion helpers
+def notNull(parameterName, value)
+{
+	if(value == null || value == "")
+	{
+		httpError(404, "Missing parameter '${parameterName}'.")
+	}
+	return value;
+}
+
+// Region: Get infos
+def getDeviceInfos(device, details = false)
+{
+   	def infos = [
+		id: device.id,
+		name: device.displayName,
+		state: device.currentValue("switch"),
+        color: device.currentValue("color"),
+        hue: device.currentValue("hue"),
+        saturation: device.currentValue("saturation"),
+		capabilities: device.capabilities.collect { getCapabilityInfos(it, details) }
+	]
+	
+	if (details)
+	{
+		infos["attributes"] = device.supportedAttributes.collect { getAttributeInfos(it, details) }
+		infos["commands"] = device.supportedCommands.collect { getCommandInfos(it, details) }
+	}
+	
+	return infos;
+}
+
+def getCapabilityInfos(capablity, details = false)
+{
+	def infos = [name: capablity.name]
+	
+	if(details)
+	{
+		infos["attributes"] = capablity.attributes.collect { getAttributeInfos(it, details) }
+		infos["commands"] = capablity.commands.collect { getCommandInfos(it, details) }
+	}
+	
+	return infos;
+}
+
+def getCommandInfos(command, details = false)
+{
+	return [
+		name: command.name, 
+		arguments: command.arguments
+	]
+}
+
+def getAttributeInfos(attribute, details = false)
+{
+	return [
+		name: attribute.name, 
+		arguments: attribute.dataType,
+		values: attribute.values
+	]
+}
+
+def getRoutineInfos(routine, details = false)
+{
+	def infos = [
+    	id: routine.id,
+        name: routine.label
+	];
+    
+    if (details)
+    {
+    	infos["hasSecureActions"] = routine.hasSecureActions;
+        infos["action"] = routine.action;
+    }
+    
+    return infos;
+}
+
+// Region: Push notification
+def sendPushNotification(capability, eventArgs)
+{
+	def deviceId = eventArgs.deviceId;
+	log.debug "Received notification for '${capability}' for device '${deviceId}'.";
+	
+	def subscriptions = state.pushChannels.get(deviceId);
+	if (subscriptions == null || subscriptions.empty)
+	{
+		log.error "No subscription found for device ${deviceId}, unsubscribing!";
+		unsubscribe(eventArgs.device);
+		
+		return;
+	}
+
+	subscriptions.groupBy { it.channelUri }.each { sendPushNotification(capability, eventArgs, it.key, it.value) }
+}
+
+def sendPushNotification(capability, eventArgs, channelUri, subscriptions)
+{
+	try {
+		def request = [
+			uri: channelUri,
+			//headers: [name: "Authorization", value: "Bearer ${subscription.token}"],
+			body: [
+				location: [
+					id: eventArgs.locationId,
+				],
+				device: getDeviceInfos(eventArgs.device),
+				event: [
+					source: capability, 
+					date: eventArgs.isoDate, 
+					value: eventArgs.value,
+					name: eventArgs.name,
+				],
+				subscriptions: subscriptions.collect { [id: it.id, token: it.token] }
+			]
+		]
+		
+		// Async post is still in beta stage ...
+		httpPostJson(request) { resp -> log.debug "response: ${resp.status}." }
+		
+	} catch (e) {
+		log.error "Failed to push notification: ${e}"
+	}
+}