MSA-1970: lassicGOD:Fibaro Wall Plug ZW5

devicetypes/classicgod/fibaro-wall-plug-zw5.src/fibaro-wall-plug-zw5.groovy

@@ -1,368 +1,735 @@
 /**
+
  *  Fibaro Wall Plug ZW5
+
  *  Requires: Fibaro Double Switch 2 Child Device
+
  *
+
  *  Copyright 2017 Artur Draga
+
  *
+
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+
  *  in compliance with the License. You may obtain a copy of the License at:
+
  *
+
  *	  http://www.apache.org/licenses/LICENSE-2.0
+
  *
+
  *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+
  *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+
  *  for the specific language governing permissions and limitations under the License.
+
  *
+
  */
+
 metadata {
+
 	definition (name: "Fibaro Wall Plug ZW5", namespace: "ClassicGOD", author: "Artur Draga") {
+
 		capability "Switch"
+
 		capability "Energy Meter"
+
 		capability "Power Meter"
+
 		capability "Configuration"
+
 		capability "Health Check"
 
+
+
 		command "reset"
+
 		command "refresh"
 
+
+
 		fingerprint deviceId: "0x1001", inClusters:"0x5E,0x22,0x59,0x56,0x7A,0x32,0x71,0x73,0x98,0x31,0x85,0x70,0x72,0x5A,0x8E,0x25,0x86"
+
 		fingerprint deviceId: "0x1001", inClusters:"0x5E,0x22,0x59,0x56,0x7A,0x32,0x71,0x73,0x31,0x85,0x70,0x72,0x5A,0x8E,0x25,0x86"
+
 	}
 
+
+
 	tiles (scale: 2) {
+
 		multiAttributeTile(name:"switch", type: "lighting", width: 3, height: 4, canChangeIcon: true){
+
 			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+
 				attributeState "off", label: 'Off', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState:"turningOn"
+
 				attributeState "on", label: 'On', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#00a0dc", nextState:"turningOff"
+
 				attributeState "turningOn", label:'Turning On', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#00a0dc", nextState:"turningOff"
+
 				attributeState "turningOff", label:'Turning Off', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
+
 			}
+
 			tileAttribute("device.combinedMeter", key:"SECONDARY_CONTROL") {
+
 				attributeState("combinedMeter", label:'${currentValue}')
+
 			} 
+
 		}
+
 		valueTile("power", "device.power", decoration: "flat", width: 2, height: 2) {
+
 			state "power", label:'${currentValue}\nW', action:"refresh"
+
 		}
+
 		valueTile("energy", "device.energy", decoration: "flat", width: 2, height: 2) {
+
 			state "energy", label:'${currentValue}\nkWh', action:"refresh"
+
 		}
+
 		valueTile("reset", "device.energy", decoration: "flat", width: 2, height: 2) {
+
 			state "reset", label:'reset\nkWh', action:"reset"
+
 		}
+
 	}
 
+
+
 	preferences {
+
 		input ( name: "logging", title: "Logging", type: "boolean", required: false )
+
 		parameterMap().each {
+
 			input (
+
 				name: it.key,
+
 				title: "${it.num}. ${it.title}",
+
 				description: it.descr,
+
 				type: it.type,
+
 				options: it.options,
+
 				range: (it.min != null && it.max != null) ? "${it.min}..${it.max}" : null,
+
 				defaultValue: it.def,
+
 				required: false
+
 			)
+
 		}
+
 	}
+
 }
 
+
+
 //UI and tile functions
+
 def on() {
+
 	encap(zwave.basicV1.basicSet(value: 255))
+
 }
 
+
+
 def off() {
+
 	encap(zwave.basicV1.basicSet(value: 0))
+
 }
 
+
+
 def reset() {
+
 	def cmds = []
+
 	cmds << zwave.meterV3.meterReset()
+
 	cmds << zwave.meterV3.meterGet(scale: 0)
+
 	cmds << zwave.meterV3.meterGet(scale: 2)
+
 	encapSequence(cmds,1000)
+
 }
 
+
+
 def refresh() {
+
 	def cmds = []
+
 	cmds << zwave.meterV3.meterGet(scale: 0)
+
 	cmds << zwave.meterV3.meterGet(scale: 2)
+
 	cmds << zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 4)
+
 	encapSequence(cmds,1000)
+
 }
 
+
+
 //Configuration and synchronization
+
 def updated() {
+
 	if ( state.lastUpdated && (now() - state.lastUpdated) < 500 ) return
+
 	def cmds = []
+
 	logging("${device.displayName} - Executing updated()","info")
 
+	
+
 	def Integer cmdCount = 0
+
 	parameterMap().each {
+
 		if(settings."$it.key" != null) {
+
 			if (state."$it.key" == null) { state."$it.key" = [value: null, state: "synced"] }
+
 			if (state."$it.key".value != settings."$it.key" as Integer || state."$it.key".state == "notSynced") {
+
 				state."$it.key".value = settings."$it.key" as Integer
+
 				state."$it.key".state = "notSynced"
+
 				cmds << zwave.configurationV2.configurationSet(configurationValue: intToParam(state."$it.key".value, it.size), parameterNumber: it.num, size: it.size)
+
 				cmds << zwave.configurationV2.configurationGet(parameterNumber: it.num)
+
 				cmdCount = cmdCount + 1
+
 			}
+
 		}
+
 	}
 
+	
+
 	if ( cmdCount > 0 ) { 
+
 		logging("${device.displayName} - sending config.", "info")
+
 		sendEvent(name: "combinedMeter", value: "SYNC IN PROGRESS.", displayed: false)
+
 		runIn((5+cmdCount*2), syncCheck)
+
 	}
 
+	
+
 	state.lastUpdated = now()
+
 	if (cmds) { response(encapSequence(cmds,1000)) }
+
 }
 
+
+
 def syncCheck() {
+
 	logging("${device.displayName} - Executing syncCheck()","info")
+
 	def Integer count = 0
+
 	if (device.currentValue("combinedMeter")?.contains("SYNC") && device.currentValue("combinedMeter") != "SYNC OK.") {
+
 		parameterMap().each {
+
 			if (state."$it.key".state == "notSynced" ) {
+
 				count = count + 1
+
 			} 
+
 		}
+
 	}
+
 	if (count == 0) {
+
 		logging("${device.displayName} - Sync Complete","info")
+
 		sendEvent(name: "combinedMeter", value: "SYNC OK.", displayed: false)
+
 	} else {
+
 		logging("${device.displayName} Sync Incomplete","info")
+
 		if (device.currentValue("combinedMeter") != "SYNC FAILED!") {
+
 			sendEvent(name: "combinedMeter", value: "SYNC INCOMPLETE.", displayed: false)
+
 		}
+
 	}
+
 }
 
+
+
 //event handlers related to configuration and sync
+
 def zwaveEvent(physicalgraph.zwave.commands.configurationv2.ConfigurationReport cmd) {
+
 	def paramKey = parameterMap().find( {it.num == cmd.parameterNumber } ).key
+
 	logging("${device.displayName} - Parameter ${paramKey} value is ${cmd.scaledConfigurationValue} expected " + state."$paramKey".value, "info")
+
 	if (state."$paramKey".value == cmd.scaledConfigurationValue) {
+
 		state."$paramKey".state = "synced"
+
 	}
+
 }
 
+
+
 def zwaveEvent(physicalgraph.zwave.commands.applicationstatusv1.ApplicationRejectedRequest cmd) {
+
 	logging("${device.displayName} - rejected request!","warn")
+
 	if (device.currentValue("combinedMeter") == "SYNC IN PROGRESS.") { 
+
 		sendEvent(name: "combinedMeter", value: "SYNC FAILED!", displayed: false)
+
 	}
+
 }
 
+
+
 //event handlers
+
 def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) {
+
 	//ignore
+
 }
 
+
+
 def zwaveEvent(physicalgraph.zwave.commands.switchbinaryv1.SwitchBinaryReport cmd) {
+
 	logging("${device.displayName} - SwitchBinaryReport received, value: ${cmd.value}","info")
+
 	sendEvent([name: "switch", value: (cmd.value == 0 ) ? "off": "on"])
+
 }
 
+
+
 def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv5.SensorMultilevelReport cmd) {
+
 	logging("${device.displayName} - SensorMultilevelReport received, value: ${cmd.scaledSensorValue} scale: ${cmd.scale}","info")
+
 	if (cmd.sensorType == 4) { 
+
 		sendEvent([name: "power", value: cmd.scaledSensorValue, unit: "W"]) 
+
 		updateCombinedMeter()
+
 	}
+
 }
 
+
+
 def zwaveEvent(physicalgraph.zwave.commands.meterv3.MeterReport cmd) {
+
 	logging("${device.displayName} - MeterReport received, value: ${cmd.scaledMeterValue} scale: ${cmd.scale}","info")
+
 	switch (cmd.scale) {
+
 		case 0:
+
 			sendEvent([name: "energy", value: cmd.scaledMeterValue, unit: "kWh"])
+
 			break
+
 		case 2:
+
 			sendEvent([name: "power", value: cmd.scaledMeterValue, unit: "W"])
+
 			break
+
 	}
+
 	updateCombinedMeter()
+
 }
 
+
+
 //other
+
 private updateCombinedMeter() {
+
 	if (!device.currentValue("combinedMeter")?.contains("SYNC") || device.currentValue("combinedMeter") == "SYNC OK." || device.currentValue("combinedMeter") == null ) {
+
 		sendEvent([name: "combinedMeter", value: "${device.currentValue("power")} W / ${device.currentValue("energy")} kWh", displayed: false])
+
 	}
+
 }
 
+
+
 /*
+
 ####################
+
 ## Z-Wave Toolkit ##
+
 ####################
+
 */
+
 def parse(String description) {	  
+
 	def result = []
+
 	logging("${device.displayName} - Parsing: ${description}")
+
 	if (description.startsWith("Err 106")) {
+
 		result = createEvent(
+
 			descriptionText: "Failed to complete the network security key exchange. If you are unable to receive data from it, you must remove it from your network and add it again.",
+
 			eventType: "ALERT",
+
 			name: "secureInclusion",
+
 			value: "failed",
+
 			displayed: true,
+
 		)
+
 	} else if (description == "updated") {
+
 		return null
+
 	} else {
+
 		def cmd = zwave.parse(description, cmdVersions()) 
+
 		if (cmd) {
+
 			logging("${device.displayName} - Parsed: ${cmd}")
+
 			zwaveEvent(cmd)
+
 		}
+
 	}
+
 }
 
+
+
 def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
+
 	def encapsulatedCommand = cmd.encapsulatedCommand(cmdVersions()) 
+
 	if (encapsulatedCommand) {
+
 		logging("${device.displayName} - Parsed SecurityMessageEncapsulation into: ${encapsulatedCommand}")
+
 		zwaveEvent(encapsulatedCommand)
+
 	} else {
+
 		log.warn "Unable to extract secure cmd from $cmd"
+
 		createEvent(descriptionText: cmd.toString())
+
 	}
+
 }
 
+
+
 def zwaveEvent(physicalgraph.zwave.commands.crc16encapv1.Crc16Encap cmd) {
+
 	def version = cmdVersions()[cmd.commandClass as Integer]
+
 	def ccObj = version ? zwave.commandClass(cmd.commandClass, version) : zwave.commandClass(cmd.commandClass)
+
 	def encapsulatedCommand = ccObj?.command(cmd.command)?.parse(cmd.data)
+
 	if (!encapsulatedCommand) {
+
 		log.warn "Could not extract crc16 command from $cmd"
+
 	} else {
+
 		logging("${device.displayName} - Parsed Crc16Encap into: ${encapsulatedCommand}")
+
 		zwaveEvent(encapsulatedCommand)
+
 	}
+
 }
 
+
+
 def zwaveEvent(physicalgraph.zwave.commands.multichannelv3.MultiChannelCmdEncap cmd) {
+
 	def encapsulatedCommand = cmd.encapsulatedCommand(cmdVersions())
+
 	if (encapsulatedCommand) {
+
 		logging("${device.displayName} - Parsed MultiChannelCmdEncap ${encapsulatedCommand}")
+
 		zwaveEvent(encapsulatedCommand, cmd.sourceEndPoint as Integer)
+
 	}
+
 }
 
 
+
+
+
 private logging(text, type = "debug") {
+
 	if (settings.logging == "true") {
+
 		log."$type" text
+
 	}
+
 }
 
+
+
 private secEncap(physicalgraph.zwave.Command cmd) {
+
 	logging("${device.displayName} - encapsulating command using Secure Encapsulation, command: $cmd","info")
+
 	zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
+
 }
 
+
+
 private crcEncap(physicalgraph.zwave.Command cmd) {
+
 		logging("${device.displayName} - encapsulating command using CRC16 Encapsulation, command: $cmd","info")
+
 		zwave.crc16EncapV1.crc16Encap().encapsulate(cmd).format() // doesn't work righ now because SmartThings...
+
 		//"5601${cmd.format()}0000"
+
 }
 
+
+
 private multiEncap(physicalgraph.zwave.Command cmd, Integer ep) {
+
 	logging("${device.displayName} - encapsulating command using Multi Channel Encapsulation, ep: $ep command: $cmd","info")
+
 	zwave.multiChannelV3.multiChannelCmdEncap(destinationEndPoint:ep).encapsulate(cmd)
+
 }
 
+
+
 private encap(physicalgraph.zwave.Command cmd) {
+
 	if (zwaveInfo.zw.contains("s")) { 
+
 		secEncap(cmd)
+
 	} else if (zwaveInfo.cc.contains("56")){ 
+
 		crcEncap(cmd)
+
 	} else {
+
 		logging("${device.displayName} - no encapsulation supported for command: $cmd","info")
+
 		cmd.format()
+
 	}
+
 }
 
+
+
 private encap(physicalgraph.zwave.Command cmd, Integer ep) {
+
 	encap(multiEncap(cmd, ep))
+
 }
 
+
+
 private encap(List encapList) {
+
 	encap(encapList[0], encapList[1])
+
 }
 
+
+
 private encap(Map encapMap) {
+
 	encap(encapMap.cmd, encapMap.ep)
+
 }
 
+
+
 private encapSequence(cmds, Integer delay=250) {
+
 	delayBetween(cmds.collect{ encap(it) }, delay)
+
 }
 
+
+
 private encapSequence(cmds, Integer delay, Integer ep) {
+
 	delayBetween(cmds.collect{ encap(it, ep) }, delay)
+
 }
 
+
+
 private List intToParam(Long value, Integer size = 1) {
+
 	def result = []
+
 	size.times { 
+
 		result = result.plus(0, (value & 0xFF) as Short)
+
 		value = (value >> 8)
+
 	}
+
 	return result
-}
+
-/*
-##########################
-## Device Configuration ##
-##########################
-*/
-private Map cmdVersions() {
-	//[0x5E: 2, 0x59: 1, 0x80: 1, 0x56: 1, 0x7A: 3, 0x73: 1, 0x98: 1, 0x22: 1, 0x85: 2, 0x5B: 1, 0x70: 2, 0x8E: 2, 0x86: 2, 0x84: 2, 0x75: 2, 0x72: 2] //Fibaro KeyFob
-	//[0x5E: 2, 0x86: 1, 0x72: 2, 0x59: 1, 0x80: 1, 0x73: 1, 0x56: 1, 0x22: 1, 0x31: 5, 0x98: 1, 0x7A: 3, 0x20: 1, 0x5A: 1, 0x85: 2, 0x84: 2, 0x71: 3, 0x8E: 2, 0x70: 2, 0x30: 1, 0x9C: 1] //Fibaro Motion Sensor ZW5
-	//[0x5E: 2, 0x86: 1, 0x72: 1, 0x59: 1, 0x73: 1, 0x22: 1, 0x56: 1, 0x32: 3, 0x71: 1, 0x98: 1, 0x7A: 1, 0x25: 1, 0x5A: 1, 0x85: 2, 0x70: 2, 0x8E: 2, 0x60: 3, 0x75: 1, 0x5B: 1] //Fibaro Double Switch 2
-	[0x5E: 2, 0x22: 1, 0x59: 1, 0x56: 1, 0x7A: 1, 0x32: 3, 0x71: 1, 0x73: 1, 0x98: 1, 0x31: 5, 0x85: 2, 0x70: 2, 0x72: 2, 0x5A: 1, 0x8E: 2, 0x25: 1, 0x86: 2] //Fibaro Wall Plug ZW5
 }
 
+/*
+
+##########################
+
+## Device Configuration ##
+
+##########################
+
+*/
+
+private Map cmdVersions() {
+
+	//[0x5E: 2, 0x59: 1, 0x80: 1, 0x56: 1, 0x7A: 3, 0x73: 1, 0x98: 1, 0x22: 1, 0x85: 2, 0x5B: 1, 0x70: 2, 0x8E: 2, 0x86: 2, 0x84: 2, 0x75: 2, 0x72: 2] //Fibaro KeyFob
+
+	//[0x5E: 2, 0x86: 1, 0x72: 2, 0x59: 1, 0x80: 1, 0x73: 1, 0x56: 1, 0x22: 1, 0x31: 5, 0x98: 1, 0x7A: 3, 0x20: 1, 0x5A: 1, 0x85: 2, 0x84: 2, 0x71: 3, 0x8E: 2, 0x70: 2, 0x30: 1, 0x9C: 1] //Fibaro Motion Sensor ZW5
+
+	//[0x5E: 2, 0x86: 1, 0x72: 1, 0x59: 1, 0x73: 1, 0x22: 1, 0x56: 1, 0x32: 3, 0x71: 1, 0x98: 1, 0x7A: 1, 0x25: 1, 0x5A: 1, 0x85: 2, 0x70: 2, 0x8E: 2, 0x60: 3, 0x75: 1, 0x5B: 1] //Fibaro Double Switch 2
+
+	[0x5E: 2, 0x22: 1, 0x59: 1, 0x56: 1, 0x7A: 1, 0x32: 3, 0x71: 1, 0x73: 1, 0x98: 1, 0x31: 5, 0x85: 2, 0x70: 2, 0x72: 2, 0x5A: 1, 0x8E: 2, 0x25: 1, 0x86: 2] //Fibaro Wall Plug ZW5
+
+}
+
+
+
 private parameterMap() {[
+
 	[key: "alwaysActive", num: 1, size: 1, type: "enum", options: [0: "0 - inactive", 1: "1 - activated"], def: "0", title: "Always on function", descr: null],
+
 	[key: "restoreState", num: 2, size: 1, type: "enum", options: [0: "0 - power off after power failure", 1: "1 - restore state"], def: "1", title: "Restore state after power failure", descr: null],
+
 	[key: "overloadSafety", num: 3, size: 2, type: "number", def: 0, min: 0, max: 30000 , title: "Overload safety switch", descr: null],
+
 	[key: "immediatePowerReports", num: 10, size: 1, type: "number", def: 80, min: 1, max: 100, title: "Immediate power reports", descr: null],
+
 	[key: "standardPowerReports", num: 11, size: 1, type: "number", def: 15, min: 1, max: 100, title: "Standard power reports", descr: null], 
+
 	[key: "powerReportFrequency", num: 12, size: 2, type: "number", def: 30, min: 5, max: 600, title: "Power reporting interval", descr: null],
+
 	[key: "energyReport", num: 13, size: 2, type: "number", def: 10, min: 0, max: 500, title: "Energy reports", descr: null], 
+
 	[key: "periodicReports", num: 14, size: 2, type: "number", def: 3600, min: 0, max: 32400, title: "Periodic power and energy reports", descr: null], 
+
 	[key: "deviceEnergyConsumed", num: 15, size: 1, type: "enum", options: [0: "0 - don't measure", 1: "1 - measure"], def: "0", title: "Energy consumed by the device itself", descr: null],
+
 	[key: "powerLoad", num: 40, size: 2, type: "number", def: 25000, min: 1000, max: 30000, title: "Power load which makes the LED ring flash violet", descr: null],
+
 	[key: "ringColorOn", num: 41, size: 1, type: "enum", options: [
+
 		0: "0 - Off",
+
 		1: "1 - Load based - continuous", 
+
 		2: "2 - Load based - steps", 
+
 		3: "3 - White", 
+
 		4: "4 - Red", 
+
 		5: "5 - Green", 
+
 		6: "6 - Blue", 
+
 		7: "7 - Yellow", 
+
 		8: "8 - Cyan", 
+
 		9: "9 - Magenta"
+
 		], def: "1", title: "Ring LED color when on", descr: null],
+
 	[key: "ringColorOff", num: 42, size: 1, type: "enum", options: [
+
 		0: "0 - Off",
+
 		1: "1 - Last measured power",  
+
 		3: "3 - White", 
+
 		4: "4 - Red", 
+
 		5: "5 - Green", 
+
 		6: "6 - Blue", 
+
 		7: "7 - Yellow", 
+
 		8: "8 - Cyan", 
+
 		9: "9 - Magenta"
+
 		], def: "0", title: "Ring LED color when off", descr: null]
+
 ]}

devicetypes/fibargroup/fibaro-door-window-sensor-zw5-with-temperature.src/fibaro-door-window-sensor-zw5-with-temperature.groovy

@@ -39,8 +39,8 @@ metadata {
             }
 
             tileAttribute("device.tamper", key:"SECONDARY_CONTROL") {
-				attributeState("active", label:'tamper active', backgroundColor:"#00A0DC")
+				attributeState("active", label:'tamper active', backgroundColor:"#53a7c0")
-				attributeState("inactive", label:'tamper inactive', backgroundColor:"#CCCCCC")
+				attributeState("inactive", label:'tamper inactive', backgroundColor:"#ffffff")
 			}
         }
 

devicetypes/fibargroup/fibaro-door-window-sensor-zw5.src/fibaro-door-window-sensor-zw5.groovy

@@ -37,8 +37,8 @@ metadata {
             }
 
             tileAttribute("device.tamper", key:"SECONDARY_CONTROL") {
-				attributeState("active", label:'tamper active', backgroundColor:"#00A0DC")
+				attributeState("active", label:'tamper active', backgroundColor:"#53a7c0")
-				attributeState("inactive", label:'tamper inactive', backgroundColor:"#CCCCCC")
+				attributeState("inactive", label:'tamper inactive', backgroundColor:"#ffffff")
 			}
         }
 

devicetypes/smartthings/aeon-key-fob.src/aeon-key-fob.groovy

@@ -21,7 +21,6 @@ metadata {
 		capability "Battery"
 
 		fingerprint deviceId: "0x0101", inClusters: "0x86,0x72,0x70,0x80,0x84,0x85"
-		fingerprint mfr: "0086", prod: "0001", model: "0026", deviceJoinName: "Aeon Panic Button"
 	}
 
 	simulator {
@@ -131,12 +130,5 @@ def updated() {
 }
 
 def initialize() {
-	def zwMap = getZwaveInfo()
+	sendEvent(name: "numberOfButtons", value: 4)
-	def buttons = 4 // Default for Key Fob
-
-	// Only one button for Aeon Panic Button
-	if (zwMap && zwMap.mfr == "0086" && zwMap.prod == "0001" && zwMap.model == "0026") {
-		buttons = 1
-	}
-	sendEvent(name: "numberOfButtons", value: buttons)
 }

devicetypes/smartthings/aeon-multisensor-6.src/.st-ignore

@@ -1,2 +0,0 @@
-.st-ignore
-README.md

devicetypes/smartthings/aeon-multisensor-6.src/README.md

@@ -1,43 +0,0 @@
-# Aeon Multisensor 6
-
-Cloud Execution
-
-Works with: 
-
-* [Aeon Labs MultiSensor 6](https://www.smartthings.com/products/aeon-labs-multisensor-6)
-
-## Table of contents
-
-* [Capabilities](#capabilities)
-* [Health](#device-health)
-* [Troubleshooting](#troubleshooting)
-
-## Capabilities
-
-* **Motion Sensor** - can detect motion
-* **Temperature Measurement** - defines device measures current temperature
-* **Relative Humidity Measurement** - allow reading the relative humidity from devices that support it
-* **Illuminance Measurement** - gives the illuminance reading from devices that support it
-* **Ultraviolet Index** - gives the ability to get the ultraviolet index from devices that report it
-* **Configuration** - _configure()_ command called when device is installed or device preferences updated
-* **Sensor** - detects sensor events
-* **Battery** - defines device uses a battery
-* **Health Check** - indicates ability to get device health notifications
-
-## Device Health
-
-Aeon Labs MultiSensor 6 is polled by the hub.
-As of hubCore version 0.14.38 the hub sends up reports every 15 minutes regardless of whether the state changed.
-Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*15 + 2)mins = 32 mins.
-Not to mention after going OFFLINE when the device is plugged back in, it might take a considerable amount of time for
-the device to appear as ONLINE again. This is because if this listening device does not respond to two poll requests in a row,
-it is not polled for 5 minutes by the hub. This can delay up the process of being marked ONLINE by quite some time.
-
-* __32min__ checkInterval
-
-## Troubleshooting
-
-If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
-Pairing needs to be tried again by placing the device closer to the hub.
-Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
-* [Aeon Labs MultiSensor 6 Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206157226)

devicetypes/smartthings/aeon-multisensor-6.src/aeon-multisensor-6.groovy

@@ -22,7 +22,6 @@ metadata {
 		capability "Configuration"
 		capability "Sensor"
 		capability "Battery"
-		capability "Health Check"
 
 		attribute "tamper", "enum", ["detected", "clear"]
 		attribute "batteryStatus", "string"
@@ -30,7 +29,6 @@ metadata {
 
 		fingerprint deviceId: "0x2101", inClusters: "0x5E,0x86,0x72,0x59,0x85,0x73,0x71,0x84,0x80,0x30,0x31,0x70,0x7A", outClusters: "0x5A"
 		fingerprint deviceId: "0x2101", inClusters: "0x5E,0x86,0x72,0x59,0x85,0x73,0x71,0x84,0x80,0x30,0x31,0x70,0x7A,0x5A"
-		fingerprint mfr:"0086", prod:"0102", model:"0064", deviceJoinName: "Aeon Labs MultiSensor 6"
 	}
 
 	simulator {
@@ -129,14 +127,7 @@ metadata {
 	}
 }
 
-def installed(){
-// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-}
-
 def updated() {
-// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 	log.debug "Updated with settings: ${settings}"
 	log.debug "${device.displayName} is now ${device.latestValue("powerSupply")}"
 
@@ -335,13 +326,6 @@ def zwaveEvent(physicalgraph.zwave.Command cmd) {
 	createEvent(descriptionText: cmd.toString(), isStateChange: false)
 }
 
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-	secure(zwave.batteryV1.batteryGet())
-}
-
 def configure() {
 	// This sensor joins as a secure device if you double-click the button to include it
 	log.debug "${device.displayName} is configuring its settings"

devicetypes/smartthings/ct100-thermostat.src/ct100-thermostat.groovy

@@ -9,7 +9,6 @@ metadata {
 		capability "Configuration"
 		capability "Refresh"
 		capability "Sensor"
-		capability "Health Check"
 		
 		attribute "thermostatFanState", "string"
 
@@ -19,7 +18,6 @@ metadata {
 		command "quickSetHeat"
 
 		fingerprint deviceId: "0x08", inClusters: "0x43,0x40,0x44,0x31,0x80,0x85,0x60"
-		fingerprint mfr:"0098", prod:"6401", model:"0107", deviceJoinName: "2Gig CT100 Programmable Thermostat"
 	}
 
 	// simulator metadata
@@ -108,16 +106,6 @@ metadata {
 	}
 }
 
-def updated() {
-	// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-}
-
-def installed() {
-	// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-}
-
 def parse(String description)
 {
 	def result = []
@@ -451,14 +439,6 @@ def setCoolingSetpoint(Double degrees, Integer delay = 30000) {
 	], delay)
 }
 
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-	log.debug "ping() called"
-	refresh()
-}
-
 def configure() {
 	delayBetween([
 		zwave.thermostatModeV2.thermostatModeSupportedGet().format(),

devicetypes/smartthings/fibaro-motion-sensor.src/fibaro-motion-sensor.groovy

@@ -107,8 +107,8 @@
 			state "configure", label:'', action:"configuration.configure", icon:"st.secondary.configure"
 		}
         standardTile("acceleration", "device.acceleration") {
-			state("active", label:'vibration', icon:"st.motion.acceleration.active", backgroundColor:"#00a0dc")
+			state("active", label:'vibration', icon:"st.motion.acceleration.active", backgroundColor:"#53a7c0")
-			state("inactive", label:'still', icon:"st.motion.acceleration.inactive", backgroundColor:"#cccccc")
+			state("inactive", label:'still', icon:"st.motion.acceleration.inactive", backgroundColor:"#ffffff")
 		}
 
 

devicetypes/smartthings/fortrezz-water-valve.src/fortrezz-water-valve.groovy

@@ -12,7 +12,7 @@
  *
  */
 metadata {
-	definition (name: "Fortrezz Water Valve", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.watervalve") {
+	definition (name: "Fortrezz Water Valve", namespace: "smartthings", author: "SmartThings") {
 		capability "Actuator"
 		capability "Health Check"
 		capability "Valve"
@@ -34,22 +34,19 @@ metadata {
 	}
 
 	// tile definitions
-	tiles(scale: 2) {
+	tiles {
-		multiAttributeTile(name:"valve", type: "generic", width: 6, height: 4, canChangeIcon: true){
+		standardTile("contact", "device.contact", width: 2, height: 2, canChangeIcon: true) {
-			tileAttribute ("device.valve", key: "PRIMARY_CONTROL") {
+			state "open", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#00A0DC", nextState:"closing"
-				attributeState "open", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#00A0DC", nextState:"closing"
+			state "closed", label: '${name}', action: "valve.open", icon: "st.valves.water.closed", backgroundColor: "#ffffff", nextState:"opening"
-				attributeState "closed", label: '${name}', action: "valve.open", icon: "st.valves.water.closed", backgroundColor: "#ffffff", nextState:"opening"
+			state "opening", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
-				attributeState "opening", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
+			state "closing", label: '${name}', action: "valve.open", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-				attributeState "closing", label: '${name}', action: "valve.open", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-			}
 		}
-
+		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
-		standardTile("refresh", "device.valve", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
 			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
 
-		main "valve"
+		main "contact"
-		details(["valve","refresh"])
+		details(["contact","refresh"])
 	}
 }
 
@@ -65,23 +62,22 @@ def updated(){
 
 def parse(String description) {
 	log.trace description
+	def result = null
 	def cmd = zwave.parse(description)
 	if (cmd) {
-		return zwaveEvent(cmd)
+		result = createEvent(zwaveEvent(cmd))
 	}
-	log.debug "Could not parse message"
+	log.debug "Parse returned ${result?.descriptionText}"
-	return null
+	return result
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.switchbinaryv1.SwitchBinaryReport cmd) {
 	def value = cmd.value ? "closed" : "open"
-
+	[name: "contact", value: value, descriptionText: "$device.displayName valve is $value"]
-	return [createEventWithDebug([name: "contact", value: value, descriptionText: "$device.displayName valve is $value"]),
-			createEventWithDebug([name: "valve", value: value, descriptionText: "$device.displayName valve is $value"])]
 }
 
 def zwaveEvent(physicalgraph.zwave.Command cmd) {
-	return createEvent([:]) // Handles all Z-Wave commands we aren't interested in
+	[:] // Handles all Z-Wave commands we aren't interested in
 }
 
 def open() {
@@ -102,9 +98,3 @@ def ping() {
 def refresh() {
 	zwave.switchBinaryV1.switchBinaryGet().format()
 }
-
-def createEventWithDebug(eventMap) {
-	def event = createEvent(eventMap)
-	log.debug "Event created with ${event?.descriptionText}"
-	return event
-}

devicetypes/smartthings/smartalert-siren.src/README.md

@@ -4,7 +4,7 @@ Cloud Execution
 
 Works with:
 
-* [FortrezZ Siren Strobe Alarm](https://www.smartthings.com/products/fortrezz-siren-strobe-alarm)
+* [FortrezZ Siren Strobe Alarm](https://www.smartthings.com/works-with-smartthings/other/fortrezz-water-valve)
 
 ## Table of contents
 

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -61,8 +61,8 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name: "motion", type: "generic", width: 6, height: 4) {
 			tileAttribute("device.motion", key: "PRIMARY_CONTROL") {
-				attributeState "active", label: 'motion', icon: "st.motion.motion.active", backgroundColor: "#00A0DC"
+				attributeState "active", label: 'motion', icon: "st.motion.motion.active", backgroundColor: "#53a7c0"
-				attributeState "inactive", label: 'no motion', icon: "st.motion.motion.inactive", backgroundColor: "#cccccc"
+				attributeState "inactive", label: 'no motion', icon: "st.motion.motion.inactive", backgroundColor: "#ffffff"
 			}
 		}
 		valueTile("temperature", "device.temperature", width: 2, height: 2) {

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -87,8 +87,8 @@ metadata {
 			state("closed", label: 'Closed', icon: "st.contact.contact.closed", backgroundColor: "#00a0dc")
 		}
 		standardTile("acceleration", "device.acceleration", width: 2, height: 2) {
-			state("active", label: 'Active', icon: "st.motion.acceleration.active", backgroundColor: "#00a0dc")
+			state("active", label: 'Active', icon: "st.motion.acceleration.active", backgroundColor: "#53a7c0")
-			state("inactive", label: 'Inactive', icon: "st.motion.acceleration.inactive", backgroundColor: "#cccccc")
+			state("inactive", label: 'Inactive', icon: "st.motion.acceleration.inactive", backgroundColor: "#ffffff")
 		}
 		valueTile("temperature", "device.temperature", width: 2, height: 2) {
 			state("temperature", label: '${currentValue}°',
@@ -178,7 +178,7 @@ private List<Map> handleAcceleration(descMap) {
 			result += parseAxis(descMap.additionalAttrs)
 		}
 	} else if (descMap.clusterInt == 0xFC02 && descMap.attrInt == 0x0012) {
-		def addAttrs = descMap.additionalAttrs ?: []
+		def addAttrs = descMap.additionalAttrs
 		addAttrs << ["attrInt": descMap.attrInt, "value": descMap.value]
 		result += parseAxis(addAttrs)
 	}

devicetypes/smartthings/wemo-motion.src/wemo-motion.groovy

@@ -46,8 +46,8 @@
         }
 
 		standardTile("motion", "device.motion", width: 2, height: 2) {
-			state("active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#00A0DC")
+			state("active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0")
-			state("inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#CCCCCC")
+			state("inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff")
       		state("offline", label:'${name}', icon:"st.motion.motion.inactive", backgroundColor:"#ff0000")
 		}
 

devicetypes/smartthings/zigbee-dimmer.src/zigbee-dimmer.groovy

@@ -25,7 +25,6 @@ metadata {
 
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 ON/OFF/DIM", deviceJoinName: "SYLVANIA Smart A19 Soft White"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY A19 ON/OFF/DIM 10 Year", deviceJoinName: "SYLVANIA Smart 10-Year A19"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, FF00", outClusters: "0019", manufacturer: "MRVL", model: "MZ100", deviceJoinName: "Wemo Bulb"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B05", outClusters: "0019", manufacturer: "OSRAM SYLVANIA", model: "iQBR30", deviceJoinName: "Sylvania Ultra iQ"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "LIGHTIFY PAR38 ON/OFF/DIM", deviceJoinName: "SYLVANIA Smart PAR38 Soft White"

devicetypes/smartthings/zigbee-lock.src/zigbee-lock.groovy

@@ -34,7 +34,7 @@ import physicalgraph.zigbee.zcl.DataType
         fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019", manufacturer: "Yale", model: "YRD210 PB DB", deviceJoinName: "Yale Push Button Deadbolt Lock"
         fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019", manufacturer: "Yale", model: "YRD220/240 TSDB", deviceJoinName: "Yale Touch Screen Deadbolt Lock"
         fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019", manufacturer: "Yale", model: "YRL210 PB LL", deviceJoinName: "Yale Push Button Lever Lock"
-        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019", manufacturer: "Yale", model: "YRD226/246 TSDB", deviceJoinName: "Yale Touch Screen Deadbolt Lock"
+	fingerprint profileId: "0104", inClusters: "0000,0001,0003,0009,000A,0101,0020", outClusters: "000A,0019", manufacturer: "Yale", model: "YRD226/246 TSDB", deviceJoinName: "Yale Touch Screen Deadbolt Lock"
 	}
 
     tiles(scale: 2) {

devicetypes/smartthings/zigbee-valve.src/zigbee-valve.groovy

@@ -39,7 +39,7 @@ metadata {
 
     tiles(scale: 2) {
         multiAttributeTile(name:"valve", type: "generic", width: 6, height: 4, canChangeIcon: true){
-            tileAttribute ("device.valve", key: "PRIMARY_CONTROL") {
+            tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
                 attributeState "open", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#00A0DC", nextState:"closing"
                 attributeState "closed", label: '${name}', action: "valve.open", icon: "st.valves.water.closed", backgroundColor: "#ffffff", nextState:"opening"
                 attributeState "opening", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#00A0DC", nextState:"closing"
@@ -83,9 +83,6 @@ def parse(String description) {
             }
         }
         sendEvent(event)
-        //handle valve attribute
-        event.name = "valve"
-        sendEvent(event)
     }
     else {
         def descMap = zigbee.parseDescriptionAsMap(description)

devicetypes/smartthings/zwave-device-multichannel.src/zwave-device-multichannel.groovy

@@ -75,10 +75,6 @@ def parse(String description) {
 	return result
 }
 
-def uninstalled() {
-	sendEvent(name: "epEvent", value: "delete all", isStateChange: true, displayed: false, descriptionText: "Delete endpoint devices")
-}
-
 def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd) {
 	[ createEvent(descriptionText: "${device.displayName} woke up", isStateChange:true),
 	  response(["delay 2000", zwave.wakeUpV1.wakeUpNoMoreInformation().format()]) ]

devicetypes/smartthings/zwave-door-window-sensor.src/zwave-door-window-sensor.groovy

@@ -30,15 +30,9 @@ metadata {
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x86,0x72,0x98", outClusters: "0x5A,0x82"
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x80,0x71,0x85,0x70,0x72,0x86,0x30,0x31,0x84,0x59,0x73,0x5A,0x8F,0x98,0x7A", outClusters:"0x20" // Philio multi+
 		fingerprint mfr:"0086", prod:"0002", model:"001D", deviceJoinName: "Aeon Labs Door/Window Sensor (Gen 5)"
-		fingerprint mfr:"0086", prod:"0102", model:"0070", deviceJoinName:  "Aeon Labs Door/Window Sensor 6"
-		fingerprint mfr:"0086", prod:"0102", model:"0059", deviceJoinName: "Aeon Labs Recessed Door Sensor"
 		fingerprint mfr:"014A", prod:"0001", model:"0002", deviceJoinName: "Ecolink Door/Window Sensor"
-		fingerprint mfr:"014A", prod:"0001", model:"0003", deviceJoinName: "Ecolink Tilt Sensor"
+		fingerprint mfr:"0086", prod:"0102", model:"0070", deviceJoinName:  "Aeon Labs Door/Window Sensor 6"
 		fingerprint mfr:"011A", prod:"0601", model:"0903", deviceJoinName: "Enerwave Magnetic Door/Window Sensor"
-		fingerprint mfr:"014F", prod:"2001", model:"0102", deviceJoinName: "Nortek GoControl Door/Window Sensor"
-		fingerprint mfr:"0063", prod:"4953", model:"3031", deviceJoinName: "Jasco Hinge Pin Door Sensor"
-		fingerprint mfr:"019A", prod:"0003", model:"0003", deviceJoinName: "Sensative Strips"
-
 	}
 
 	// simulator metadata

devicetypes/smartthings/zwave-lock.src/zwave-lock.groovy

@@ -26,24 +26,7 @@ metadata {
 
 		fingerprint deviceId: "0x4003", inClusters: "0x98"
 		fingerprint deviceId: "0x4004", inClusters: "0x98"
-		fingerprint mfr:"0090", prod:"0001", model:"0236", deviceJoinName: "KwikSet SmartCode 910 Deadbolt Door Lock"
+		fingerprint mfr:"0129", prod:"0002", model:"0000", deviceJoinName: "Yale Key Free Touchscreen Deadbolt"
-		fingerprint mfr:"0090", prod:"0003", model:"0238", deviceJoinName: "KwikSet SmartCode 910 Deadbolt Door Lock"
-		fingerprint mfr:"0090", prod:"0001", model:"0001", deviceJoinName: "KwikSet SmartCode 910 Contemporary Deadbolt Door Lock"
-		fingerprint mfr:"0090", prod:"0003", model:"0339", deviceJoinName: "KwikSet SmartCode 912 Lever Door Lock"
-		fingerprint mfr:"0090", prod:"0003", model:"4006", deviceJoinName: "KwikSet SmartCode 914 Deadbolt Door Lock" //backlit version
-		fingerprint mfr:"0090", prod:"0003", model:"0440", deviceJoinName: "KwikSet SmartCode 914 Deadbolt Door Lock"
-		fingerprint mfr:"0090", prod:"0001", model:"0642", deviceJoinName: "KwikSet SmartCode 916 Touchscreen Deadbolt Door Lock"
-		fingerprint mfr:"0090", prod:"0003", model:"0642", deviceJoinName: "KwikSet SmartCode 916 Touchscreen Deadbolt Door Lock"
-		fingerprint mfr:"003B", prod:"6341", model:"0544", deviceJoinName: "Schlage Camelot Touchscreen Deadbolt Door Lock"
-		fingerprint mfr:"003B", prod:"6341", model:"5044", deviceJoinName: "Schlage Century Touchscreen Deadbolt Door Lock"
-		fingerprint mfr:"003B", prod:"634B", model:"504C", deviceJoinName: "Schlage Connected Keypad Lever Door Lock"
-		fingerprint mfr:"0129", prod:"0002", model:"0800", deviceJoinName: "Yale Touchscreen Deadbolt Door Lock" // YRD120
-		fingerprint mfr:"0129", prod:"0002", model:"0000", deviceJoinName: "Yale Touchscreen Deadbolt Door Lock" // YRD220, YRD240
-		fingerprint mfr:"0129", prod:"0002", model:"FFFF", deviceJoinName: "Yale Touchscreen Lever Door Lock" // YRD220
-		fingerprint mfr:"0129", prod:"0004", model:"0800", deviceJoinName: "Yale Push Button Deadbolt Door Lock" // YRD110
-		fingerprint mfr:"0129", prod:"0004", model:"0000", deviceJoinName: "Yale Push Button Deadbolt Door Lock" // YRD210
-		fingerprint mfr:"0129", prod:"0001", model:"0000", deviceJoinName: "Yale Push Button Lever Door Lock" // YRD210
-		fingerprint mfr:"0129", prod:"8002", model:"0600", deviceJoinName: "Yale Assure Lock with Bluetooth"
 	}
 
 	simulator {

devicetypes/smartthings/zwave-motion-sensor.src/zwave-motion-sensor.groovy

@@ -29,7 +29,7 @@ metadata {
 		fingerprint mfr: "0060", prod: "0001", model: "0002", deviceJoinName: "Everspring Motion Sensor"  // Everspring SP814
 		fingerprint mfr: "0060", prod: "0001", model: "0003", deviceJoinName: "Everspring Motion Sensor"  // Everspring HSP02
 		fingerprint mfr: "011A", prod: "0601", model: "0901", deviceJoinName: "Enerwave Motion Sensor"  // Enerwave ZWN-BPC
-		fingerprint mfr: "0063", prod: "4953", model: "3133", deviceJoinName: "GE Portable Smart Motion Sensor"
+		fingerprint mfr: "0063", prod: "4953", model: "3133", deviceJoinName: "GE Smart Motion Sensor"
 	}
 
 	simulator {

devicetypes/smartthings/zwave-plus-motion-temp-sensor.src/zwave-plus-motion-temp-sensor.groovy

@@ -37,8 +37,8 @@ metadata {
 
 	tiles {
 		standardTile("motion", "device.motion", width: 3, height: 2) {
-			state "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#00A0DC"
+			state "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0"
-			state "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#CCCCCC"
+			state "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff"
 		}
 
 		valueTile("temperature", "device.temperature", inactiveLabel: false) {

devicetypes/smartthings/zwave-smoke-alarm.src/zwave-smoke-alarm.groovy

@@ -22,7 +22,6 @@ metadata {
 		attribute "alarmState", "string"
 
 		fingerprint deviceId: "0xA100", inClusters: "0x20,0x80,0x70,0x85,0x71,0x72,0x86"
-		fingerprint mfr:"0138", prod:"0001", model:"0001", deviceJoinName: "First Alert Smoke Detector"
 		fingerprint mfr:"0138", prod:"0001", model:"0002", deviceJoinName: "First Alert Smoke Detector and Carbon Monoxide Alarm (ZCOMBO)"
 	}
 

devicetypes/smartthings/zwave-water-valve.src/.st-ignore

@@ -1,2 +0,0 @@
-.st-ignore
-README.md

devicetypes/smartthings/zwave-water-valve.src/README.md

@@ -1,38 +0,0 @@
-# Z-Wave Water Valve
-
-Cloud Execution
-
-Works with: 
-
-* [Leak Intelligence Leak Gopher Water Shutoff Valve](https://www.smartthings.com/works-with-smartthings/other/leak-intelligence-leak-gopher-water-shutoff-valve)
-
-
-## Table of contents
-
-* [Capabilities](#capabilities)
-* [Health](#device-health)
-* [Troubleshooting](#Troubleshooting)
-
-## Capabilities
-
-* **Actuator** - represents that a Device has commands
-* **Health Check** - indicates ability to get device health notifications
-* **Valve** - allows for the control of a valve device
-* **Polling** - represents that poll() can be implemented for the device
-* **Refresh** - _refresh()_ command for status updates
-* **Sensor** - detects sensor events
-
-## Device Health
-
-SmartThings platform will ping the device after `checkInterval` seconds of inactivity in last attempt to reach the device before marking it `OFFLINE`
-
-* __32min__ checkInterval
-
-## Troubleshooting
-
-If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
-Pairing needs to be tried again by placing the device closer to the hub.
-Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
-* [Leak Intelligence Leak Gopher Water Shutoff Valve Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/209631423-Leak-Gopher-Z-Wave-Valve-Control)
-
-

devicetypes/smartthings/zwave-water-valve.src/zwave-water-valve.groovy

@@ -12,16 +12,14 @@
  *
  */
 metadata {
-	definition (name: "Z-Wave Water Valve", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.watervalve") {
+	definition (name: "Z-Wave Water Valve", namespace: "smartthings", author: "SmartThings") {
 		capability "Actuator"
-		capability "Health Check"
 		capability "Valve"
 		capability "Polling"
 		capability "Refresh"
 		capability "Sensor"
 
 		fingerprint deviceId: "0x1006", inClusters: "0x25"
-		fingerprint mfr:"0173", prod:"0003", model:"0002", deviceJoinName: "Leak Intelligence Leak Gopher Water Shutoff Valve"
 	}
 
 	// simulator metadata
@@ -37,7 +35,7 @@ metadata {
 	// tile definitions
 	tiles(scale: 2) {
 		multiAttributeTile(name:"valve", type: "generic", width: 6, height: 4, canChangeIcon: true){
-			tileAttribute ("device.valve", key: "PRIMARY_CONTROL") {
+			tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
 				attributeState "open", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#00A0DC", nextState:"closing"
 				attributeState "closed", label: '${name}', action: "valve.open", icon: "st.valves.water.closed", backgroundColor: "#ffffff", nextState:"opening"
 				attributeState "opening", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
@@ -45,7 +43,7 @@ metadata {
 			}
 		}
 
-		standardTile("refresh", "device.valve", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+		standardTile("refresh", "device.contact", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
 			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
 
@@ -55,32 +53,24 @@ metadata {
 
 }
 
-def installed() {
-	// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-}
-
 def updated() {
-	// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 	response(refresh())
 }
 
 def parse(String description) {
 	log.trace "parse description : $description"
+	def result = null
 	def cmd = zwave.parse(description, [0x20: 1])
 	if (cmd) {
-		return zwaveEvent(cmd)
+		result = createEvent(zwaveEvent(cmd))
 	}
-	log.debug "Could not parse message"
+	log.debug "Parse returned ${result?.descriptionText}"
-	return null
+	return result
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) {
-	def value = cmd.value == 0xFF ?  "open" : cmd.value == 0x00 ? "closed" : "unknown"
+    def value = cmd.value == 0xFF ?  "open" : cmd.value == 0x00 ? "closed" : "unknown"
-
+    [name: "contact", value: value, descriptionText: "$device.displayName valve is $value"]
-	return [createEventWithDebug([name: "contact", value: value, descriptionText: "$device.displayName valve is $value"]),
-			createEventWithDebug([name: "valve", value: value, descriptionText: "$device.displayName valve is $value"])]
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {   //TODO should show MSR when device is discovered
@@ -90,22 +80,20 @@ def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerS
     log.debug "productTypeId:    ${cmd.productTypeId}"
     def msr = String.format("%04X-%04X-%04X", cmd.manufacturerId, cmd.productTypeId, cmd.productId)
     updateDataValue("MSR", msr)
-    return createEventWithDebug([descriptionText: "$device.displayName MSR: $msr", isStateChange: false])
+    [descriptionText: "$device.displayName MSR: $msr", isStateChange: false]
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.deviceresetlocallyv1.DeviceResetLocallyNotification cmd) {
-    return createEventWithDebug([descriptionText: cmd.toString(), isStateChange: true, displayed: true])
+    [descriptionText: cmd.toString(), isStateChange: true, displayed: true]
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.switchbinaryv1.SwitchBinaryReport cmd) {
 	def value = cmd.value == 0xFF ?  "open" : cmd.value == 0x00 ? "closed" : "unknown"
-
+	[name: "contact", value: value, descriptionText: "$device.displayName valve is $value"]
-	return [createEventWithDebug([name: "contact", value: value, descriptionText: "$device.displayName valve is $value"]),
-			createEventWithDebug([name: "valve", value: value, descriptionText: "$device.displayName valve is $value"])]
 }
 
 def zwaveEvent(physicalgraph.zwave.Command cmd) {
-	return createEvent([:]) // Handles all Z-Wave commands we aren't interested in
+	[:] // Handles all Z-Wave commands we aren't interested in
 }
 
 def open() {
@@ -126,13 +114,6 @@ def poll() {
     zwave.switchBinaryV1.switchBinaryGet().format()
 }
 
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-	refresh()
-}
-
 def refresh() {
     log.debug "refresh() is called"
     def commands = [zwave.switchBinaryV1.switchBinaryGet().format()]
@@ -141,9 +122,3 @@ def refresh() {
     }
     delayBetween(commands,100)
 }
-
-def createEventWithDebug(eventMap) {
-	def event = createEvent(eventMap)
-	log.debug "Event created with ${event?.descriptionText}"
-	return event
-}

smartapps/gideon-api/gideon-smart-home.src/gideon-smart-home.groovy

@@ -765,6 +765,7 @@ def turnOffSwitch() {
         } else {
             
             device.off();
+                  
             return [Device_id: params.id, result_action: "200"]
         }
 }
@@ -788,7 +789,6 @@ def getTempSensorsStatus(id) {
             return []
         } else {
         	def bat = getBatteryStatus(device.id)
-            def scale = [Scale: location.temperatureScale]
+        	return [temperature: device.currentValue('temperature')] + bat
-        	return [temperature: device.currentValue('temperature')] + bat + scale
    		}
    }

smartapps/opent2t/opent2t-smartapp-test.src/opent2t-smartapp-test.groovy

@@ -162,17 +162,6 @@ def registerAllDeviceSubscriptions() {
 	registerChangeHandler(inputs)
 }
 
-//Subscribe to events from a list of devices
-def registerChangeHandler(myList) {
-	myList.each { myDevice ->
-		def theAtts = myDevice.supportedAttributes
-		theAtts.each { att ->
-			subscribe(myDevice, att.name, deviceEventHandler)
-			log.info "Registering for ${myDevice.displayName}.${att.name}"
-		}
-	}
-}
-
 //Endpoints function: Subscribe to events from a specific device
 def registerDeviceChange() {
 	def subscriptionEndpt = params.subscriptionURL

smartapps/smartthings/smart-nightlight.src/smart-nightlight.groovy

@@ -98,7 +98,7 @@ def motionHandler(evt) {
 	else {
 		state.motionStopTime = now()
 		if(delayMinutes) {
-			runIn(delayMinutes*60, turnOffMotionAfterDelay, [overwrite: true])
+			runIn(delayMinutes*60, turnOffMotionAfterDelay, [overwrite: false])
 		} else {
 			turnOffMotionAfterDelay()
 		}

smartapps/tslagle13/hello-home-phrase-director.src/hello-home-phrase-director.groovy

@@ -125,19 +125,19 @@
       if(allOk) {
     
       if(everyoneIsAway() && (state.sunMode == "sunrise")) {
-        log.debug("Home is Empty  Setting New Away Mode")
+        log.info("Home is Empty  Setting New Away Mode")
         def delay = (falseAlarmThreshold != null && falseAlarmThreshold != "") ? falseAlarmThreshold * 60 : 10 * 60 
         runIn(delay, "setAway")
       }
     
       if(everyoneIsAway() && (state.sunMode == "sunset")) {
-        log.debug("Home is Empty  Setting New Away Mode")
+        log.info("Home is Empty  Setting New Away Mode")
         def delay = (falseAlarmThreshold != null && falseAlarmThreshold != "") ? falseAlarmThreshold * 60 : 10 * 60 
         runIn(delay, "setAway")
       }
       
       else {
-      log.debug("Home is Occupied Setting New Home Mode")
+      log.info("Home is Occupied Setting New Home Mode")
       setHome()
     
     
@@ -152,7 +152,7 @@
         log.debug("Checking if everyone is away")
     
         if(everyoneIsAway()) {
-          log.debug("Nobody is home, running away sequence")
+          log.info("Nobody is home, running away sequence")
           def delay = (falseAlarmThreshold != null && falseAlarmThreshold != "") ? falseAlarmThreshold * 60 : 10 * 60 
           runIn(delay, "setAway")
         }
@@ -161,7 +161,7 @@
     else {
     	def lastTime = state[evt.deviceId]
         if (lastTime == null || now() - lastTime >= 1 * 60000) {
-      		log.debug("Someone is home, running home sequence")
+      		log.info("Someone is home, running home sequence")
       		setHome()
         }    
     	state[evt.deviceId] = now()
@@ -175,14 +175,14 @@
       if(everyoneIsAway()) {
         if(state.sunMode == "sunset") {
           def message = "Performing \"${awayNight}\" for you as requested."
-          log.debug(message)
+          log.info(message)
           sendAway(message)
           location.helloHome.execute(settings.awayNight)
         }
         
         else if(state.sunMode == "sunrise") {
           def message = "Performing \"${awayDay}\" for you as requested."
-          log.debug(message)
+          log.info(message)
           sendAway(message)
           location.helloHome.execute(settings.awayDay)
           }
@@ -192,19 +192,19 @@
       }
     
       else {
-        log.debug("Somebody returned home before we set to '${newAwayMode}'")
+        log.info("Somebody returned home before we set to '${newAwayMode}'")
       }
     }
     
     //set home mode when house is occupied
     def setHome() {
     sendOutOfDateNotification()
-    log.debug("Setting Home Mode!!")
+    log.info("Setting Home Mode!!")
     if(anyoneIsHome()) {
           if(state.sunMode == "sunset"){
           if (location.mode != "${homeModeNight}"){
           def message = "Performing \"${homeNight}\" for you as requested."
-            log.debug(message)
+            log.info(message)
             sendHome(message)
             location.helloHome.execute(settings.homeNight)
             }
@@ -213,7 +213,7 @@
           if(state.sunMode == "sunrise"){
           if (location.mode != "${homeModeDay}"){
           def message = "Performing \"${homeDay}\" for you as requested."
-            log.debug(message)
+            log.info(message)
             sendHome(message)
             location.helloHome.execute(settings.homeDay)
                 }