Merge pull request #2167 from SmartThingsCommunity/staging

Rolling up staging to production

devicetypes/fortrezz/fortrezz-water-sensor.src/fortrezz-water-sensor.groovy

@@ -1,180 +0,0 @@
-/**
- *  Copyright 2015 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-metadata {
-	definition (name: "FortrezZ Water Sensor", namespace: "fortrezz", author: "SmartThings") {
-		capability "Water Sensor"
-		capability "Sensor"
-		capability "Battery"
-        capability "Temperature Measurement"
-
-		fingerprint deviceId: "0x2001", inClusters: "0x30,0x9C,0x9D,0x85,0x80,0x72,0x31,0x84,0x86"
-		fingerprint deviceId: "0x2101", inClusters: "0x71,0x70,0x85,0x80,0x72,0x31,0x84,0x86"
-	}
-
-	simulator {
-		status "dry": "command: 7105, payload: 00 00 00 FF 05 FE 00 00"
-		status "wet": "command: 7105, payload: 00 FF 00 FF 05 02 00 00"
-		status "overheated": "command: 7105, payload: 00 00 00 FF 04 02 00 00"
-		status "freezing": "command: 7105, payload: 00 00 00 FF 04 05 00 00"
-		status "normal": "command: 7105, payload: 00 00 00 FF 04 FE 00 00"
-		for (int i = 0; i <= 100; i += 20) {
-			status "battery ${i}%": new physicalgraph.zwave.Zwave().batteryV1.batteryReport(batteryLevel: i).incomingMessage()
-		}
-	}
-	
-	tiles(scale: 2) {
-		multiAttributeTile(name:"water", type: "generic", width: 6, height: 4){
-			tileAttribute ("device.water", key: "PRIMARY_CONTROL") {
-				attributeState "dry", label: "Dry", icon:"st.alarm.water.dry", backgroundColor:"#ffffff"
-				attributeState "wet", label: "Wet", icon:"st.alarm.water.wet", backgroundColor:"#53a7c0"
-			}
-		}
-		standardTile("temperatureState", "device.temperature", width: 2, height: 2) {
-			state "normal", icon:"st.alarm.temperature.normal", backgroundColor:"#ffffff"
-			state "freezing", icon:"st.alarm.temperature.freeze", backgroundColor:"#53a7c0"
-			state "overheated", icon:"st.alarm.temperature.overheat", backgroundColor:"#F80000"
-		}
-		valueTile("temperature", "device.temperature", width: 2, height: 2) {
-            state("temperature", label:'${currentValue}°',
-                backgroundColors:[
-                    [value: 31, color: "#153591"],
-                    [value: 44, color: "#1e9cbb"],
-                    [value: 59, color: "#90d2a7"],
-                    [value: 74, color: "#44b621"],
-                    [value: 84, color: "#f1d801"],
-                    [value: 95, color: "#d04e00"],
-                    [value: 96, color: "#bc2323"]
-                ]
-            )
-        }
-		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
-			state "battery", label:'${currentValue}% battery', unit:""
-		}
-		main (["water", "temperatureState"])
-		details(["water", "temperatureState", "temperature", "battery"])
-	}
-}
-
-def parse(String description) {
-	def result = []
-	def parsedZwEvent = zwave.parse(description, [0x30: 1, 0x71: 2, 0x84: 1])
-
-	if(parsedZwEvent) {
-		if(parsedZwEvent.CMD == "8407") {
-			def lastStatus = device.currentState("battery")
-			def ageInMinutes = lastStatus ? (new Date().time - lastStatus.date.time)/60000 : 600
-			log.debug "Battery status was last checked ${ageInMinutes} minutes ago"
-
-			if (ageInMinutes >= 600) {
-				log.debug "Battery status is outdated, requesting battery report"
-				result << new physicalgraph.device.HubAction(zwave.batteryV1.batteryGet().format())
-			}
-			result << new physicalgraph.device.HubAction(zwave.wakeUpV1.wakeUpNoMoreInformation().format())
-		}
-		result << createEvent( zwaveEvent(parsedZwEvent) )
-	}
-	if(!result) result = [ descriptionText: parsedZwEvent, displayed: false ]
-	log.debug "Parse returned ${result}"
-	return result
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd)
-{
-	[descriptionText: "${device.displayName} woke up", isStateChange: false]
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.sensorbinaryv1.SensorBinaryReport cmd)
-{
-	def map = [:]
-	map.name = "water"
-	map.value = cmd.sensorValue ? "wet" : "dry"
-	map.descriptionText = "${device.displayName} is ${map.value}"
-	map
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
-	def map = [:]
-	if(cmd.batteryLevel == 0xFF) {
-		map.name = "battery"
-		map.value = 1
-		map.descriptionText = "${device.displayName} has a low battery"
-		map.displayed = true
-	} else {
-		map.name = "battery"
-		map.value = cmd.batteryLevel > 0 ? cmd.batteryLevel.toString() : 1
-		map.unit = "%"
-		map.displayed = false
-	}
-	map
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.alarmv2.AlarmReport cmd)
-{
-	def map = [:]
-	if (cmd.zwaveAlarmType == physicalgraph.zwave.commands.alarmv2.AlarmReport.ZWAVE_ALARM_TYPE_WATER) {
-		map.name = "water"
-		map.value = cmd.alarmLevel ? "wet" : "dry"
-		map.descriptionText = "${device.displayName} is ${map.value}"
-	}
-	if(cmd.zwaveAlarmType ==  physicalgraph.zwave.commands.alarmv2.AlarmReport.ZWAVE_ALARM_TYPE_HEAT) {
-		map.name = "temperatureState"
-		if(cmd.zwaveAlarmEvent == 1) { map.value = "overheated"}
-		if(cmd.zwaveAlarmEvent == 2) { map.value = "overheated"}
-		if(cmd.zwaveAlarmEvent == 3) { map.value = "changing temperature rapidly"}
-		if(cmd.zwaveAlarmEvent == 4) { map.value = "changing temperature rapidly"}
-		if(cmd.zwaveAlarmEvent == 5) { map.value = "freezing"}
-		if(cmd.zwaveAlarmEvent == 6) { map.value = "freezing"}
-		if(cmd.zwaveAlarmEvent == 254) { map.value = "normal"}
-		map.descriptionText = "${device.displayName} is ${map.value}"
-	}
-
-	map
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv5.SensorMultilevelReport cmd)
-{
-	def map = [:]
-	if(cmd.sensorType == 1) {
-		map.name = "temperature"
-        if(cmd.scale == 0) {
-        	map.value = getTemperature(cmd.scaledSensorValue)
-        } else {
-	        map.value = cmd.scaledSensorValue
-        }
-        map.unit = location.temperatureScale
-	}
-	map
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd)
-{
-	def map = [:]
-	map.name = "water"
-	map.value = cmd.value ? "wet" : "dry"
-	map.descriptionText = "${device.displayName} is ${map.value}"
-	map
-}
-
-def getTemperature(value) {
-	if(location.temperatureScale == "C"){
-		return value
-    } else {
-        return Math.round(celsiusToFahrenheit(value))
-    }
-}
-
-def zwaveEvent(physicalgraph.zwave.Command cmd)
-{
-	log.debug "COMMAND CLASS: $cmd"
-}