MSA-632: Device Type for Climax power outlet. Supports switch and power meter functions.

*  Product Page: http://www.climax.com.tw/psm29zb-zb.php
 *  Developer manual https://fccid.io/document.php?id=2553357

devicetypes/bortuzar/climax-power-outlet.src/climax-power-outlet.groovy

@@ -0,0 +1,195 @@
+/**
+ *  Climax PSM-29ZBSR - Zigbee - Power Outlet Switch and Energy Meter
+ *
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ *  Thanks to SmartThings and its community!
+ * 
+ *  Product Page: http://www.climax.com.tw/psm29zb-zb.php
+ *  Developer manual https://fccid.io/document.php?id=2553357
+ *
+ */
+metadata {
+	definition (name: "Climax Power Outlet", namespace: "bortuzar", author: "bortuzar") {
+	
+    	capability "Actuator"
+        capability "Configuration"
+        capability "Refresh"
+		capability "Sensor"
+        capability "Switch"
+        capability "Power Meter"
+
+		fingerprint endpointId: "0x0A", profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0702", outClusters: "0000"
+	}
+    
+
+	// simulator metadata
+	simulator {
+		// status messages
+		status "on": "on/off: 1"
+		status "off": "on/off: 0"
+
+		// reply messages
+		reply "zcl on-off on": "on/off: 1"
+		reply "zcl on-off off": "on/off: 0"
+	}
+
+	// UI tile definitions
+	tiles {
+		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
+			state "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
+			state "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
+			state "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
+			state "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
+		}
+		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
+			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+		valueTile("power", "device.power", inactiveLabel: false, decoration: "flat") {
+			state "power", label: '${currentValue} W'
+		}
+        
+        //standardTile("configure", "device.power", inactiveLabel: false, decoration: "flat") {
+		//	state "configure", label:'', action:"configuration.configure", icon:"st.secondary.configure"
+		//}
+
+		
+		main(["switch", "power"])
+		details(["switch", "power", "refresh"])
+	}
+}
+
+
+// Parse incoming device messages to generate events
+def parse(String description) {
+
+	log.debug "Parse Method Called"
+	log.trace description
+    
+	if (description?.startsWith("catchall:")) {
+		def msg = zigbee.parse(description)
+		log.trace "data: $msg.data"
+
+	} else if (description?.startsWith("read attr -")) {
+		def descMap = parseDescriptionAsMap(description)
+        log.debug "Desc Map:"
+        log.debug descMap
+		
+        if (descMap.cluster == "0006" && descMap.attrId == "0000") {
+                name = "switch"
+                value = descMap.value.endsWith("01") ? "on" : "off"
+                def result = createEvent(name: name, value: value)
+                log.debug "Parse returned ${result?.descriptionText}"
+                return result
+        } else if(descMap.cluster =="0702" && descMap.attrId == "0400") {
+            
+            def value = convertHexToInt(descMap.value[-4..-1])/10 
+            // Reading the last 4 characters of the string...Maybe 4 are needed. Needs further test.
+            // Dividing by 10 as the Divisor is 10000 and unit is kW for the device. AttrId: 0302 and 0300. Simplifying to 10
+            log.debug value
+            def name = "power"
+            def result = createEvent(name: name, value: value)
+            log.debug "Parse returned ${result?.descriptionText}"
+            return result 
+        }
+    } else {
+		def name = description?.startsWith("on/off: ") ? "switch" : null
+		def value = name == "switch" ? (description?.endsWith(" 1") ? "on" : "off") : null
+		def result = createEvent(name: name, value: value)
+		log.debug "Parse returned ${result?.descriptionText}"
+		return result
+	}
+}
+
+def on() {
+	log.debug "On Method called"
+	sendEvent(name: "switch", value: "on")
+	"st cmd 0x${device.deviceNetworkId} 1 6 1 {}"
+}
+
+def off() {
+	log.debug "Off Method called"
+	sendEvent(name: "switch", value: "off")
+	"st cmd 0x${device.deviceNetworkId} 1 6 0 {}"
+}
+
+def refresh() {
+  	log.debug "Refresh Method called";	
+    //read attribute 1024Decimal, translates to 400Hex.
+    [
+		"st rattr 0x${device.deviceNetworkId} 1 6 0", "delay 500",    
+        "st rattr 0x${device.deviceNetworkId} 1 0x0702 1024", , "delay 500" 
+	]
+}
+
+
+def configure() {
+
+	log.debug "Configure Method called"
+
+	String zigbeeId = swapEndianHex(device.hub.zigbeeId)
+	
+	def configCmds = [	
+  
+        //Switch Reporting
+        "zcl global send-me-a-report 6 0 0x10 0 3600 {01}", "delay 500",
+        "send 0x${device.deviceNetworkId} 1 1", "delay 1000",
+        
+        //bing to cluster 0x006. Switch On-Off
+        "zdo bind 0x${device.deviceNetworkId} 1 1 6 {${device.zigbeeId}} {}", "delay 1000",
+        
+        //bind to cluster 0x702. Power Consumption
+        "zdo bind 0x${device.deviceNetworkId} 1 1 0x0702 {${device.zigbeeId}} {}", "delay 500",
+        
+	]
+    return configCmds + refresh() // send refresh cmds as part of config
+}
+
+
+def parseDescriptionAsMap(description) {
+	(description - "read attr - ").split(",").inject([:]) { map, param ->
+		def nameAndValue = param.split(":")
+		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
+	}
+}
+
+private hex(value, width=2) {
+	def s = new BigInteger(Math.round(value).toString()).toString(16)
+	while (s.size() < width) {
+		s = "0" + s
+	}
+	s
+}
+
+private Integer convertHexToInt(hex) {
+	Integer.parseInt(hex,16)
+}
+
+
+private String swapEndianHex(String hex) {
+    reverseArray(hex.decodeHex()).encodeHex()
+}
+
+
+private byte[] reverseArray(byte[] array) {
+    int i = 0;
+    int j = array.length - 1;
+    byte tmp;
+    while (j > i) {
+        tmp = array[j];
+        array[j] = array[i];
+        array[i] = tmp;
+        j--;
+        i++;
+    }
+    return array
+}

devicetypes/smartthings/dimmer-switch.src/dimmer-switch.groovy

@@ -55,141 +55,136 @@ metadata {
 			}
 		}
 
-		standardTile("indicator", "device.indicatorStatus", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
+		standardTile("indicator", "device.indicatorStatus", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
 			state "when off", action:"indicator.indicatorWhenOn", icon:"st.indicators.lit-when-off"
 			state "when on", action:"indicator.indicatorNever", icon:"st.indicators.lit-when-on"
 			state "never", action:"indicator.indicatorWhenOff", icon:"st.indicators.never-lit"
 		}
-		standardTile("refresh", "device.switch", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
+
-			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+		standardTile("refresh", "device.switch", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
+			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+
+		valueTile("level", "device.level", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "level", label:'${currentValue} %', unit:"%", backgroundColor:"#ffffff"
 		}
 
 		main(["switch"])
-		details(["switch", "refresh", "indicator"])
+		details(["switch", "level", "indicator", "refresh"])
+
 	}
 }
 
 def parse(String description) {
-	def item1 = [
+	def result = null
-		canBeCurrentState: false,
+	if (description != "updated") {
-		linkText: getLinkText(device),
+		log.debug "parse() >> zwave.parse($description)"
-		isStateChange: false,
+		def cmd = zwave.parse(description, [0x20: 1, 0x26: 1, 0x70: 1])
-		displayed: false,
+		if (cmd) {
-		descriptionText: description,
+			result = zwaveEvent(cmd)
-		value:  description
+		}
-	]
-	def result
-	def cmd = zwave.parse(description, [0x20: 1, 0x26: 1, 0x70: 1])
-	if (cmd) {
-		result = createEvent(cmd, item1)
 	}
-	else {
+	if (result?.name == 'hail' && hubFirmwareLessThan("000.011.00602")) {
-		item1.displayed = displayed(description, item1.isStateChange)
+		result = [result, response(zwave.basicV1.basicGet())]
-		result = [item1]
+		log.debug "Was hailed: requesting state update"
+	} else {
+		log.debug "Parse returned ${result?.descriptionText}"
 	}
-	log.debug "Parse returned ${result?.descriptionText}"
+	return result
-	result
 }
 
-def createEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd, Map item1) {
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) {
-	def result = doCreateEvent(cmd, item1)
+	dimmerEvents(cmd)
-	for (int i = 0; i < result.size(); i++) {
+}
-		result[i].type = "physical"
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd) {
+	dimmerEvents(cmd)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.switchmultilevelv1.SwitchMultilevelReport cmd) {
+	dimmerEvents(cmd)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.switchmultilevelv1.SwitchMultilevelSet cmd) {
+	dimmerEvents(cmd)
+}
+
+private dimmerEvents(physicalgraph.zwave.Command cmd) {
+	def value = (cmd.value ? "on" : "off")
+	def result = [createEvent(name: "switch", value: value)]
+	if (cmd.value && cmd.value <= 100) {
+		result << createEvent(name: "level", value: cmd.value, unit: "%")
 	}
-	result
+	return result
 }
 
-def createEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd, Map item1) {
-	def result = doCreateEvent(cmd, item1)
-	for (int i = 0; i < result.size(); i++) {
-		result[i].type = "physical"
-	}
-	result
-}
-
-def createEvent(physicalgraph.zwave.commands.switchmultilevelv1.SwitchMultilevelStartLevelChange cmd, Map item1) {
-	[]
-}
-
-def createEvent(physicalgraph.zwave.commands.switchmultilevelv1.SwitchMultilevelStopLevelChange cmd, Map item1) {
-	[response(zwave.basicV1.basicGet())]
-}
-
-def createEvent(physicalgraph.zwave.commands.switchmultilevelv1.SwitchMultilevelSet cmd, Map item1) {
-	def result = doCreateEvent(cmd, item1)
-	for (int i = 0; i < result.size(); i++) {
-		result[i].type = "physical"
-	}
-	result
-}
-
-def createEvent(physicalgraph.zwave.commands.switchmultilevelv1.SwitchMultilevelReport cmd, Map item1) {
-	def result = doCreateEvent(cmd, item1)
-	result[0].descriptionText = "${item1.linkText} is ${item1.value}"
-	result[0].handlerName = cmd.value ? "statusOn" : "statusOff"
-	for (int i = 0; i < result.size(); i++) {
-		result[i].type = "digital"
-	}
-	result
-}
-
-def doCreateEvent(physicalgraph.zwave.Command cmd, Map item1) {
-	def result = [item1]
-
-	item1.name = "switch"
-	item1.value = cmd.value ? "on" : "off"
-	item1.handlerName = item1.value
-	item1.descriptionText = "${item1.linkText} was turned ${item1.value}"
-	item1.canBeCurrentState = true
-	item1.isStateChange = isStateChange(device, item1.name, item1.value)
-	item1.displayed = item1.isStateChange
-
-	if (cmd.value >= 5) {
-		def item2 = new LinkedHashMap(item1)
-		item2.name = "level"
-		item2.value = cmd.value as String
-		item2.unit = "%"
-		item2.descriptionText = "${item1.linkText} dimmed ${item2.value} %"
-		item2.canBeCurrentState = true
-		item2.isStateChange = isStateChange(device, item2.name, item2.value)
-		item2.displayed = false
-		result << item2
-	}
-	result
-}
 
 def zwaveEvent(physicalgraph.zwave.commands.configurationv1.ConfigurationReport cmd) {
+	log.debug "ConfigurationReport $cmd"
 	def value = "when off"
 	if (cmd.configurationValue[0] == 1) {value = "when on"}
 	if (cmd.configurationValue[0] == 2) {value = "never"}
-	[name: "indicatorStatus", value: value, display: false]
+	createEvent([name: "indicatorStatus", value: value])
 }
 
-def createEvent(physicalgraph.zwave.Command cmd,  Map map) {
+def zwaveEvent(physicalgraph.zwave.commands.hailv1.Hail cmd) {
-	// Handles any Z-Wave commands we aren't interested in
+	createEvent([name: "hail", value: "hail", descriptionText: "Switch button was pressed", displayed: false])
-	log.debug "UNHANDLED COMMAND $cmd"
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
+	log.debug "manufacturerId:   ${cmd.manufacturerId}"
+	log.debug "manufacturerName: ${cmd.manufacturerName}"
+	log.debug "productId:        ${cmd.productId}"
+	log.debug "productTypeId:    ${cmd.productTypeId}"
+	def msr = String.format("%04X-%04X-%04X", cmd.manufacturerId, cmd.productTypeId, cmd.productId)
+	updateDataValue("MSR", msr)
+	createEvent([descriptionText: "$device.displayName MSR: $msr", isStateChange: false])
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.switchmultilevelv1.SwitchMultilevelStopLevelChange cmd) {
+	[createEvent(name:"switch", value:"on"), response(zwave.switchMultilevelV1.switchMultilevelGet().format())]
+}
+
+def zwaveEvent(physicalgraph.zwave.Command cmd) {
+	// Handles all Z-Wave commands we aren't interested in
+	[:]
 }
 
 def on() {
-	log.info "on"
+	delayBetween([
-	delayBetween([zwave.basicV1.basicSet(value: 0xFF).format(), zwave.switchMultilevelV1.switchMultilevelGet().format()], 5000)
+			zwave.basicV1.basicSet(value: 0xFF).format(),
+			zwave.switchMultilevelV1.switchMultilevelGet().format()
+	],5000)
 }
 
 def off() {
-	delayBetween ([zwave.basicV1.basicSet(value: 0x00).format(), zwave.switchMultilevelV1.switchMultilevelGet().format()], 5000)
+	delayBetween([
+			zwave.basicV1.basicSet(value: 0x00).format(),
+			zwave.switchMultilevelV1.switchMultilevelGet().format()
+	],5000)
 }
 
 def setLevel(value) {
+	log.debug "setLevel >> value: $value"
 	def valueaux = value as Integer
-	def level = Math.min(valueaux, 99)
+	def level = Math.max(Math.min(valueaux, 99), 0)
+	if (level > 0) {
+		sendEvent(name: "switch", value: "on")
+	} else {
+		sendEvent(name: "switch", value: "off")
+	}
+	sendEvent(name: "level", value: level, unit: "%")
 	delayBetween ([zwave.basicV1.basicSet(value: level).format(), zwave.switchMultilevelV1.switchMultilevelGet().format()], 5000)
 }
 
 def setLevel(value, duration) {
+	log.debug "setLevel >> value: $value, duration: $duration"
 	def valueaux = value as Integer
-	def level = Math.min(valueaux, 99)
+	def level = Math.max(Math.min(valueaux, 99), 0)
 	def dimmingDuration = duration < 128 ? duration : 128 + Math.round(duration / 60)
-	zwave.switchMultilevelV2.switchMultilevelSet(value: level, dimmingDuration: dimmingDuration).format()
+	def getStatusDelay = duration < 128 ? (duration*1000)+2000 : (Math.round(duration / 60)*60*1000)+2000
+	delayBetween ([zwave.switchMultilevelV2.switchMultilevelSet(value: level, dimmingDuration: dimmingDuration).format(),
+				   zwave.switchMultilevelV1.switchMultilevelGet().format()], getStatusDelay)
 }
 
 def poll() {
@@ -197,21 +192,27 @@ def poll() {
 }
 
 def refresh() {
-	zwave.switchMultilevelV1.switchMultilevelGet().format()
+	log.debug "refresh() is called"
+	def commands = []
+	commands << zwave.switchMultilevelV1.switchMultilevelGet().format()
+	if (getDataValue("MSR") == null) {
+		commands << zwave.manufacturerSpecificV1.manufacturerSpecificGet().format()
+	}
+	delayBetween(commands,100)
 }
 
 def indicatorWhenOn() {
-	sendEvent(name: "indicatorStatus", value: "when on", display: false)
+	sendEvent(name: "indicatorStatus", value: "when on")
 	zwave.configurationV1.configurationSet(configurationValue: [1], parameterNumber: 3, size: 1).format()
 }
 
 def indicatorWhenOff() {
-	sendEvent(name: "indicatorStatus", value: "when off", display: false)
+	sendEvent(name: "indicatorStatus", value: "when off")
 	zwave.configurationV1.configurationSet(configurationValue: [0], parameterNumber: 3, size: 1).format()
 }
 
 def indicatorNever() {
-	sendEvent(name: "indicatorStatus", value: "never", display: false)
+	sendEvent(name: "indicatorStatus", value: "never")
 	zwave.configurationV1.configurationSet(configurationValue: [2], parameterNumber: 3, size: 1).format()
 }
 

devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/zigbee-white-color-temperature-bulb.groovy

@@ -0,0 +1,130 @@
+/**
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ *  ZigBee White Color Temperature Bulb
+ *
+ *  Author: SmartThings
+ *  Date: 2015-09-22
+ */
+
+metadata {
+    definition (name: "ZigBee White Color Temperature Bulb", namespace: "smartthings", author: "SmartThings") {
+
+        capability "Actuator"
+        capability "Color Temperature"
+        capability "Configuration"
+        capability "Refresh"
+        capability "Sensor"
+        capability "Switch"
+        capability "Switch Level"
+
+        attribute "colorName", "string"
+        command "setGenericName"
+
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,0300,0B04", outClusters: "0019"
+    }
+
+    // UI tile definitions
+    tiles(scale: 2) {
+        multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+                attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
+                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
+            }
+            tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+                attributeState "level", action:"switch level.setLevel"
+            }
+            tileAttribute ("colorName", key: "SECONDARY_CONTROL") {
+                attributeState "colorName", label:'${currentValue}'
+            }
+        }
+
+        standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+        }
+
+        controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2700..6500)") {
+            state "colorTemperature", action:"color temperature.setColorTemperature"
+        }
+        valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "colorTemperature", label: '${currentValue} K'
+        }
+
+        main(["switch"])
+        details(["switch", "colorTempSliderControl", "colorTemp", "refresh"])
+    }
+}
+
+// Parse incoming device messages to generate events
+def parse(String description) {
+    log.debug "description is $description"
+
+    def finalResult = zigbee.getKnownDescription(description)
+    if (finalResult) {
+        log.info finalResult
+        if (finalResult.type == "update") {
+            log.info "$device updates: ${finalResult.value}"
+        }
+        else {
+            sendEvent(name: finalResult.type, value: finalResult.value)
+        }
+    }
+    else {
+        log.warn "DID NOT PARSE MESSAGE for description : $description"
+        log.debug zigbee.parseDescriptionAsMap(description)
+    }
+}
+
+def off() {
+    zigbee.off()
+}
+
+def on() {
+    zigbee.on()
+}
+
+def setLevel(value) {
+    zigbee.setLevel(value)
+}
+
+def refresh() {
+    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh() + zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig()
+}
+
+def configure() {
+    log.debug "Configuring Reporting and Bindings."
+    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
+}
+
+def setColorTemperature(value) {
+    setGenericName(value)
+    zigbee.setColorTemperature(value)
+}
+
+//Naming based on the wiki article here: http://en.wikipedia.org/wiki/Color_temperature
+def setGenericName(value){
+    if (value != null) {
+        def genericName = "White"
+        if (value < 3300) {
+            genericName = "Soft White"
+        } else if (value < 4150) {
+            genericName = "Moonlight"
+        } else if (value <= 5000) {
+            genericName = "Cool White"
+        } else if (value >= 5000) {
+            genericName = "Daylight"
+        }
+        sendEvent(name: "colorName", value: genericName)
+    }
+}

devicetypes/superuser/switch-too.src/switch-too.groovy

@@ -1,48 +0,0 @@
-/**
- *  Switch Too
- *
- *  Copyright 2015 Bob Florian
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-metadata {
-	definition (name: "Switch Too", author: "Bob Florian") {
-		capability "Switch"
-	}
-
-	simulator {
-		// TODO: define status and reply messages here
-	}
-
-	tiles {
-		// TODO: define your main and details tiles here
-	}
-}
-
-// parse events into attributes
-def parse(String description) {
-	log.debug "Parsing '${description}'"
-	// TODO: handle 'switch' attribute
-
-}
-
-// handle commands
-def on() {
-	log.debug "Executing 'on'"
-	// TODO: handle 'on' command
-}
-
-def off() {
-	log.debug "Executing 'off'"
-	// TODO: handle 'off' command
-}
-
-