MSA-882: Modifications to Total Comfort API:Total Comfort API as noted in code notes

PROB-537 - Fix error in line 335

devicetypes/smartthings/homeseer-multisensor.src/homeseer-multisensor.groovy

@@ -80,19 +80,12 @@ def parse(String description) {
 	if (cmd) {
 		result = zwaveEvent(cmd)
 	}
-	// log.debug "Parsed ${description.inspect()} to ${result.inspect()}"
+	log.debug "Parsed ${description.inspect()} to ${result.inspect()}"
 	return result
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.multiinstancev1.MultiInstanceCmdEncap cmd) {
-	def encapsulated = null
-	if (cmd.respondsTo("encapsulatedCommand")) {
-		encapsulated = cmd.encapsulatedCommand()
-	} else {
-		def hex1 = { n -> String.format("%02X", n) }
-		def sorry = "command: ${hex1(cmd.commandClass)}${hex1(cmd.command)}, payload: " + cmd.parameter.collect{ hex1(it) }.join(" ")
-		encapsulated = zwave.parse(sorry, [0x31: 1, 0x84: 2, 0x60: 1, 0x85: 1, 0x70: 1])
-	}
+	def encapsulated = cmd.encapsulatedCommand([0x31: 1, 0x84: 2, 0x60: 1, 0x85: 1, 0x70: 1])
 	return encapsulated ? zwaveEvent(encapsulated) : null
 }
 

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -487,11 +487,6 @@ def enrollResponse() {
 }
 
 private Map parseAxis(String description) {
-	def hexToSignedInt = { hexVal ->
-		def unsignedVal = hexToInt(hexVal)
-		unsignedVal > 32767 ? unsignedVal - 65536 : unsignedVal
-	}
-
 	def z = hexToSignedInt(description[0..3])
 	def y = hexToSignedInt(description[10..13])
 	def x = hexToSignedInt(description[20..23])
@@ -518,6 +513,11 @@ private Map parseAxis(String description) {
 	getXyzResult(xyzResults, description)
 }
 
+private hexToSignedInt(hexVal) {
+	def unsignedVal = hexToInt(hexVal)
+	unsignedVal > 32767 ? unsignedVal - 65536 : unsignedVal
+}
+
 def garageEvent(zValue) {
 	def absValue = zValue.abs()
 	def contactValue = null

devicetypes/total-comfort-api/total-comfort-api.src/total-comfort-api.groovy

@@ -0,0 +1,970 @@
+/**
+ *  Total Comfort API
+ *   
+ *  Based on Code by Eric Thomas
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *   lgk v 3 added optional outdoor temp sensors and preferences for it, also made api login required.
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ * lgk version 4 supports celsius and fahrenheit with option, and now colors.
+ * lgk version 5, due to intermittant update failures added last update date/time tile so that you can see when it happended
+ * not there is a new input tzoffset which defaults to my time ie -5 which you must set .
+ * lgk version 6 add support for actually knowing the fan is on or not (added tile),
+ * and also the actual operating state ie heating,cooling or idle via new response variables.
+ * lgk version 7, change the new operating state to be a value vs standard tile
+ * to work around a bug smartthings caused in the latest 2.08 release with text wrapping.
+ * related also added icons to the operating state, and increase the width of the last update
+ * to avoid wrapping.
+ * 2-14-16 llb added full path to icons so the show on android Fire Tablet
+ * 2-14-16 llb added check for indoor humidity sensor to avoid 128 value if not supported
+ * 2-14-16 llb modified operating state tile to show control by Hold or Schedule
+ *
+ */
+preferences {
+    input("username", "text", title: "Username", description: "Your Total Comfort User Name", required: true)
+    input("password", "password", title: "Password", description: "Your Total Comfort password",required: true)
+    input("honeywelldevice", "text", title: "Device ID", description: "Your Device ID", required: true)
+    input ("enableOutdoorTemps", "enum", title: "Do you have the optional outdoor temperature sensor and want to enable it?", options: ["Yes", "No"], required: false, defaultValue: "No")
+    input ("tempScale", "enum", title: "Fahrenheit or Celsius?", options: ["F", "C"], required: false, defaultValue: "F")
+  	input("tzOffset", "number", title: "Time zone offset +/-xx?", required: false, defaultValue: -5, description: "Time Zone Offset ie -5.")  
+  }
+
+metadata {
+  definition (name: "Total Comfort API", namespace: 
+"Total Comfort API", author: "Eric Thomas, modified lg kahn") {
+    capability "Polling"
+    capability "Thermostat"
+    capability "Refresh"
+    capability "Temperature Measurement"
+    capability "Sensor"
+    capability "Relative Humidity Measurement"    
+    command "heatLevelUp"
+    command "heatLevelDown"
+    command "coolLevelUp"
+    command "coolLevelDown"
+    attribute "outdoorHumidity", "number"
+    attribute "outdoorTemperature", "number"
+    attribute "lastUpdate", "string"
+
+    
+  }
+
+  simulator {
+    // TODO: define status and reply messages here
+  }
+
+   tiles {
+        valueTile("temperature", "device.temperature", width: 2, height: 2, canChangeIcon: true) {
+            state("temperature", label: '${currentValue}°', 
+             icon: "http://cdn.device-icons.smartthings.com/Weather/weather2-icn@3x.png",
+             unit:"F", backgroundColors: [            
+             		[value: -14, color: "#1e9cbb"],
+         	        [value: -10, color: "#90d2a7"],
+               		[value: -5, color: "#44b621"],
+             	    [value: -2, color: "#f1d801"],
+             	    [value: 0, color: "#153591"],
+               	    [value: 7, color: "#1e9cbb"],
+     			    [value: 15, color: "#90d2a7"],           
+              		[value: 23, color: "#44b621"],
+            	    [value: 29, color: "#f1d801"],
+                    [value: 31, color: "#153591"],
+                    [value: 44, color: "#1e9cbb"],
+                    [value: 59, color: "#90d2a7"],
+                    [value: 74, color: "#44b621"],
+                    [value: 84, color: "#f1d801"],
+                    [value: 95, color: "#d04e00"],
+                    [value: 96, color: "#bc2323"]
+                ]
+            )
+        }
+        
+        standardTile("thermostatMode", "device.thermostatMode", inactiveLabel: false, canChangeIcon: true) {
+            state "off", label:'${name}', action:"thermostat.cool", icon: "http://cdn.device-icons.smartthings.com/Outdoor/outdoor19.png"
+            state "cool", label:'${name}', action:"thermostat.heat", icon: "http://cdn.device-icons.smartthings.com/Weather/weather7.png", backgroundColor: '#1e9cbb'
+            state "heat", label:'${name}', action:"thermostat.auto", icon: "http://cdn.device-icons.smartthings.com/Weather/weather14.png", backgroundColor: '#E14902'  
+            state "auto", label:'${name}', action:"thermostat.off", icon: "http://cdn.device-icons.smartthings.com/Weather/weather3.png", backgroundColor: '#44b621'
+        }
+        standardTile("thermostatFanMode", "device.thermostatFanMode", inactiveLabel: false, canChangeIcon: true) {
+            state "auto", label:'${name}', action:"thermostat.fanAuto", icon: "http://cdn.device-icons.smartthings.com/Appliances/appliances11.png", backgroundColor: '#44b621'
+            state "circulate", label:'${name}', action:"thermostat.fanCirculate", icon: "http://cdn.device-icons.smartthings.com/Appliances/appliances11.png", backgroundColor: '#44b621'
+            state "on", label:'${name}', action:"thermostat.fanOn", icon: "http://cdn.device-icons.smartthings.com/Appliances/appliances11.png", backgroundColor: '#44b621'
+        }
+
+        controlTile("coolSliderControl", "device.coolingSetpoint", "slider", height: 3, width: 1, inactiveLabel: false) {
+            state "setCoolingSetpoint", label:'Set temperarure to', action:"thermostat.setCoolingSetpoint", 
+            backgroundColors:[
+             	    [value: 0, color: "#153591"],
+               	    [value: 7, color: "#1e9cbb"],
+     			    [value: 15, color: "#90d2a7"],           
+              		[value: 23, color: "#44b621"],
+            	    [value: 29, color: "#f1d801"],
+                    [value: 31, color: "#153591"],
+                    [value: 44, color: "#1e9cbb"],
+                    [value: 59, color: "#90d2a7"],
+                    [value: 74, color: "#44b621"],
+                    [value: 84, color: "#f1d801"],
+                    [value: 95, color: "#d04e00"],
+                    [value: 96, color: "#bc2323"]
+            ]               
+        }
+       valueTile("coolingSetpoint", "device.coolingSetpoint", inactiveLabel: false) 
+    	  {
+          state "default", label:'Cool\n${currentValue}°', unit:"F",
+           backgroundColors: [
+          		    [value: 0, color: "#153591"],
+               	    [value: 7, color: "#1e9cbb"],
+     			    [value: 15, color: "#90d2a7"],           
+              		[value: 23, color: "#44b621"],
+            	    [value: 29, color: "#f1d801"],
+                    [value: 31, color: "#153591"],
+                    [value: 44, color: "#1e9cbb"],
+                    [value: 59, color: "#90d2a7"],
+                    [value: 74, color: "#44b621"],
+                    [value: 84, color: "#f1d801"],
+                    [value: 95, color: "#d04e00"],
+                    [value: 96, color: "#bc2323"]
+          ]   
+        }
+   valueTile("heatingSetpoint", "device.heatingSetpoint", inactiveLabel: false) 
+    	{
+      state "default", label:'Heat\n${currentValue}°', unit: "F",
+       backgroundColors:[
+     			    [value: 0, color: "#153591"],
+               	    [value: 7, color: "#1e9cbb"],
+     			    [value: 15, color: "#90d2a7"],           
+              		[value: 23, color: "#44b621"],
+            	    [value: 29, color: "#f1d801"],
+                    [value: 31, color: "#153591"],
+                    [value: 44, color: "#1e9cbb"],
+                    [value: 59, color: "#90d2a7"],
+                    [value: 74, color: "#44b621"],
+                    [value: 84, color: "#f1d801"],
+                    [value: 95, color: "#d04e00"],
+                    [value: 96, color: "#bc2323"]
+      ]   
+    }
+    
+        
+        //tile added for operating state - Create the tiles for each possible state, look at other examples if you wish to change the icons here. 
+        
+        valueTile("thermostatOperatingState", "device.thermostatOperatingState", inactiveLabel: false) {
+            state 'default', label:'${currentValue}',
+                    backgroundColors:[
+                                 [value: 0, color: "#911535"]]
+            state "Unknown", label:'${name}', backgroundColor : '#cc0000', icon: ""
+        }
+        
+           standardTile("fanOperatingState", "device.fanOperatingState", inactiveLabel: false) {
+            state "On", label:'${name}',icon: "http://cdn.device-icons.smartthings.com/Appliances/appliances11.png", backgroundColor : '#53a7c0'
+            state "Idle", label:'${name}',icon: "http://cdn.device-icons.smartthings.com/Appliances/appliances11.png"
+            state "Unknown", label:'${name}',icon: "http://cdn.device-icons.smartthings.com/Appliances/appliances11.png", backgroundColor : '#cc0000'
+        }
+        
+        standardTile("refresh", "device.thermostatMode", inactiveLabel: false, decoration: "flat") {
+            state "default", action:"polling.poll", icon:"http://cdn.device-icons.smartthings.com/secondary/refresh@2x.png"
+        }
+        
+        standardTile("heatLevelUp", "device.heatingSetpoint", canChangeIcon: false, inactiveLabel: false) {
+                        state "heatLevelUp", label:'  ', action:"heatLevelUp", icon:"http://cdn.device-icons.smartthings.com/thermostat/thermostat-up.png"
+        }
+        standardTile("heatLevelDown", "device.heatingSetpoint", canChangeIcon: false, inactiveLabel: false) {
+                        state "heatLevelDown", label:'  ', action:"heatLevelDown", icon:"http://cdn.device-icons.smartthings.com/thermostat/thermostat-down.png"
+        }
+        standardTile("coolLevelUp", "device.heatingSetpoint", canChangeIcon: false, inactiveLabel: false) {
+                        state "coolLevelUp", label:'  ', action:"coolLevelUp", icon:"http://cdn.device-icons.smartthings.com/thermostat/thermostat-up.png"
+        }
+        standardTile("coolLevelDown", "device.heatingSetpoint", canChangeIcon: false, inactiveLabel: false) {
+                        state "coolLevelDown", label:'  ', action:"coolLevelDown", icon:"http://cdn.device-icons.smartthings.com/thermostat/thermostat-down.png"
+        }
+        
+        valueTile("relativeHumidity", "device.relativeHumidity", inactiveLabel: false)
+        {
+        	state "default", label:'Humidity\n${currentValue}%',
+             icon: "http://cdn.device-icons.smartthings.com/Weather/weather12-icn@3x.png",
+             unit:"%", backgroundColors : [
+                    [value: 01, color: "#724529"],
+                    [value: 11, color: "#724529"],
+                    [value: 21, color: "#724529"],
+                    [value: 35, color: "#44b621"],
+                    [value: 49, color: "#44b621"],
+                    [value: 50, color: "#1e9cbb"]
+                ]
+        }
+
+        standardTile("thermostatMode", "device.thermostatMode", inactiveLabel: false, canChangeIcon: true) 
+        {
+		}
+        
+        /* lgk new tiles for outside temp and hummidity */
+          valueTile("outdoorTemperature", "device.outdoorTemperature", width: 1, height: 1, canChangeIcon: true) {
+            state("temperature", label: 'Outdoor\n ${currentValue}°',
+            icon: "http://cdn.device-icons.smartthings.com/Weather/weather2-icn@3x.png",
+            unit:"F", backgroundColors: [
+                    [value: -31, color: "#003591"],
+                    [value: -10, color: "#90d2a7"],
+               		[value: -5, color: "#44b621"],
+             	    [value: -2, color: "#f1d801"],
+             	    [value: 0, color: "#153591"],
+               	    [value: 7, color: "#1e9cbb"],
+                    [value: 00, color: "#cccccc"],
+                    [value: 31, color: "#153500"],
+                    [value: 44, color: "#1e9cbb"],
+                    [value: 59, color: "#90d2a7"],
+                    [value: 74, color: "#44b621"],
+                    [value: 84, color: "#f1d801"],
+                    [value: 95, color: "#d04e00"],
+                    [value: 96, color: "#bc2323"]
+                ]
+            )
+        }
+        
+         valueTile("outdoorHumidity", "device.outdoorHumidity", inactiveLabel: false){
+        	state "default", label:'Outdoor\n ${currentValue}%', 
+            icon: "http://cdn.device-icons.smartthings.com/Weather/weather12-icn@3x.png",
+            unit:"%", backgroundColors : [
+                    [value: 01, color: "#724529"],
+                    [value: 11, color: "#724529"],
+                    [value: 21, color: "#724529"],
+                    [value: 35, color: "#44b621"],
+                    [value: 49, color: "#44b621"],
+                    [value: 70, color: "#449c00"],
+                    [value: 90, color: "#009cbb"]
+                  
+                ]
+        }
+
+      		valueTile("status", "device.lastUpdate", width: 3, height: 1, decoration: "flat") {
+			state "default", label: 'Last Update: ${currentValue}'
+		}
+
+        main "temperature"
+        details(["temperature", "thermostatMode", "thermostatFanMode",   
+        "heatLevelUp", "heatingSetpoint" , "heatLevelDown", "coolLevelUp",
+        "coolingSetpoint", "coolLevelDown" ,"thermostatOperatingState","fanOperatingState",
+        "refresh","relativeHumidity","outdoorTemperature","outdoorHumidity", "status"])
+       
+    }
+}
+
+def coolLevelUp()
+{
+state.DisplayUnits = settings.tempScale
+if (state.DisplayUnits == "F")
+{
+    int nextLevel = device.currentValue("coolingSetpoint") + 1
+    
+    if( nextLevel > 99){
+      nextLevel = 99
+    }
+    log.debug "Setting cool set point up to: ${nextLevel}"
+    setCoolingSetpoint(nextLevel)
+}
+else
+{
+ int nextLevel = device.currentValue("coolingSetpoint") + 0.5
+    
+    if( nextLevel > 37){
+      nextLevel = 37
+    }
+    log.debug "Setting cool set point up to: ${nextLevel}"
+    setCoolingSetpoint(nextLevel)
+
+}
+}
+
+def coolLevelDown()
+{
+state.DisplayUnits = settings.tempScale
+if (state.DisplayUnits == "F")
+{
+    int nextLevel = device.currentValue("coolingSetpoint") - 1
+    
+    if( nextLevel < 50){
+      nextLevel = 50
+    }
+    log.debug "Setting cool set point down to: ${nextLevel}"
+    setCoolingSetpoint(nextLevel)
+}
+
+else
+
+{
+ double nextLevel = device.currentValue("coolingSetpoint") - 0.5
+    
+    if( nextLevel < 10){
+      nextLevel = 10
+    }
+    log.debug "Setting cool set point down to: ${nextLevel}"
+    setCoolingSetpoint(nextLevel)
+
+}
+}
+
+def heatLevelUp()
+{
+state.DisplayUnits = settings.tempScale
+if (state.DisplayUnits == "F")
+{
+   log.debug "in fahrenheit level up"
+    int nextLevel = device.currentValue("heatingSetpoint") + 1
+    
+    if( nextLevel > 90){
+      nextLevel = 90
+    }
+    log.debug "Setting heat set point up to: ${nextLevel}"
+    setHeatingSetpoint(nextLevel)
+}
+
+else
+{
+
+   log.debug "in celsius level uo"
+  double nextLevel = device.currentValue("heatingSetpoint") + 0.5
+    
+    if( nextLevel > 33){
+      nextLevel = 33
+    }
+    log.debug "Setting heat set point up to: ${nextLevel}"
+    setHeatingSetpoint(nextLevel)
+}
+
+}
+
+
+
+def heatLevelDown()
+{
+state.DisplayUnits = settings.tempScale
+if (state.DisplayUnits == "F")
+{
+   log.debug "in fahrenheit level down"
+    int nextLevel = device.currentValue("heatingSetpoint") - 1
+    
+    if( nextLevel < 40){
+      nextLevel = 40
+    }
+    log.debug "Setting heat set point down to: ${nextLevel}"
+    setHeatingSetpoint(nextLevel)
+}
+
+else
+{
+
+   log.debug "in celsius level down"
+  double nextLevel = device.currentValue("heatingSetpoint") - 0.5
+    
+    if( nextLevel < 4){
+      nextLevel = 4
+    }
+    log.debug "Setting heat set point down to: ${nextLevel}"
+    setHeatingSetpoint(nextLevel)
+}
+
+}
+
+
+
+// parse events into attributes
+def parse(String description) {
+    
+}
+
+// handle commands
+
+def setHeatingSetpoint(Double temp)
+{
+ data.SystemSwitch = 'null' 
+    data.HeatSetpoint = temp
+    data.CoolSetpoint = 'null'
+    data.HeatNextPeriod = 'null'
+    data.CoolNextPeriod = 'null'
+    data.StatusHeat='1'
+    data.StatusCool='1'
+    data.FanMode = 'null'
+  setStatus()
+
+    if(data.SetStatus==1)
+  {
+        sendEvent(name: 'heatingSetpoint', value: temp as double)
+
+    }	
+}
+
+def setHeatingSetpoint(temp) {
+  data.SystemSwitch = 'null' 
+    data.HeatSetpoint = temp
+    data.CoolSetpoint = 'null'
+    data.HeatNextPeriod = 'null'
+    data.CoolNextPeriod = 'null'
+    data.StatusHeat='1'
+    data.StatusCool='1'
+    data.FanMode = 'null'
+  setStatus()
+
+    if(data.SetStatus==1)
+  {
+        sendEvent(name: 'heatingSetpoint', value: temp as Integer)
+
+    }
+        
+}
+
+def setCoolingSetpoint(double temp) {
+  data.SystemSwitch = 'null' 
+    data.HeatSetpoint = 'null'
+    data.CoolSetpoint = temp
+    data.HeatNextPeriod = 'null'
+    data.CoolNextPeriod = 'null'
+    data.StatusHeat='1'
+    data.StatusCool='1'
+    data.FanMode = 'null'
+  setStatus()
+    
+    if(data.SetStatus==1)
+  {
+        sendEvent(name: 'coolingSetpoint', value: temp as double)
+
+    }
+}
+
+def setCoolingSetpoint(temp) {
+  data.SystemSwitch = 'null' 
+    data.HeatSetpoint = 'null'
+    data.CoolSetpoint = temp
+    data.HeatNextPeriod = 'null'
+    data.CoolNextPeriod = 'null'
+    data.StatusHeat='1'
+    data.StatusCool='1'
+    data.FanMode = 'null'
+  setStatus()
+    
+    if(data.SetStatus==1)
+  {
+        sendEvent(name: 'coolingSetpoint', value: temp as Integer)
+
+    }
+}
+
+def setTargetTemp(temp) {
+  data.SystemSwitch = 'null' 
+    data.HeatSetpoint = temp
+    data.CoolSetpoint = temp
+    data.HeatNextPeriod = 'null'
+    data.CoolNextPeriod = 'null'
+    data.StatusHeat='1'
+    data.StatusCool='1'
+    data.FanMode = 'null'
+  setStatus()
+}
+
+
+
+def setTargetTemp(double temp) {
+  data.SystemSwitch = 'null' 
+    data.HeatSetpoint = temp
+    data.CoolSetpoint = temp
+    data.HeatNextPeriod = 'null'
+    data.CoolNextPeriod = 'null'
+    data.StatusHeat='1'
+    data.StatusCool='1'
+    data.FanMode = 'null'
+  setStatus()
+}
+
+
+def off() {
+  setThermostatMode(2)
+}
+
+def auto() {
+  setThermostatMode(4)
+}
+
+def heat() {
+  setThermostatMode(1)
+}
+
+def emergencyHeat() {
+
+}
+
+def cool() {
+  setThermostatMode(3)
+}
+
+def setThermostatMode(mode) {
+  data.SystemSwitch = mode 
+    data.HeatSetpoint = 'null'
+    data.CoolSetpoint = 'null'
+    data.HeatNextPeriod = 'null'
+    data.CoolNextPeriod = 'null'
+    data.StatusHeat=1
+    data.StatusCool=1
+    data.FanMode = 'null'
+
+  setStatus()
+    
+      def switchPos
+
+        if(mode==1)
+          switchPos = 'heat'
+        if(mode==2)
+          switchPos = 'off'
+        if(mode==3)
+          switchPos = 'cool'
+ /* lgk modified my therm has pos 5 for auto vision pro */
+       if(mode==4 || swithPos == 5)
+          switchPos = 'auto'
+
+  if(data.SetStatus==1)
+  {
+        sendEvent(name: 'thermostatMode', value: switchPos)
+    }
+    
+}
+
+def fanOn() {
+    setThermostatFanMode(1)
+}
+
+def fanAuto() {
+    setThermostatFanMode(0)
+}
+
+def fanCirculate() {
+    setThermostatFanMode(2)
+}
+
+def setThermostatFanMode(mode) {    
+  
+  data.SystemSwitch = 'null' 
+    data.HeatSetpoint = 'null'
+    data.CoolSetpoint = 'null'
+    data.HeatNextPeriod = 'null'
+    data.CoolNextPeriod = 'null'
+    data.StatusHeat='null'
+    data.StatusCool='null'
+    data.FanMode = mode
+
+  setStatus()
+
+  def fanMode
+
+    if(mode==0)
+      fanMode = 'auto'
+    if(mode==1)
+      fanMode = 'on'
+    if(mode==2)
+      fanMode = 'circulate'
+   
+  if(data.SetStatus==1)
+  {
+      sendEvent(name: 'thermostatFanMode', value: fanMode)    
+    }
+
+}
+
+
+def poll() {
+refresh()
+}
+
+
+def setStatus() {
+
+  data.SetStatus = 0
+
+    login()
+  log.debug "Executing 'setStatus'"
+def today= new Date()
+log.debug "https://www.mytotalconnectcomfort.com/portal/Device/SubmitControlScreenChanges"
+log.debug "setting heat setpoint to $data.HeatSetpoint"
+log.debug "setting cool setpoint to $data.CoolSetpoint"
+    
+    def params = [
+        uri: "https://www.mytotalconnectcomfort.com/portal/Device/SubmitControlScreenChanges",
+        headers: [
+              'Accept': 'application/json, text/javascript, */*; q=0.01',
+              'DNT': '1',
+        	  'Accept-Encoding': 'gzip,deflate,sdch',
+              'Cache-Control': 'max-age=0',
+              'Accept-Language': 'en-US,en,q=0.8',
+              'Connection': 'keep-alive',
+              'Host': 'rs.alarmnet.com',
+              'Referer': "https://www.mytotalconnectcomfort.com/portal/Device/Control/${settings.honeywelldevice}",
+              'X-Requested-With': 'XMLHttpRequest',
+              'User-Agent': 'Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/28.0.1500.95 Safari/537.36',
+              'Cookie': data.cookiess        ],
+        body: [ DeviceID: "${settings.honeywelldevice}", SystemSwitch : data.SystemSwitch ,HeatSetpoint : 
+        data.HeatSetpoint, CoolSetpoint: data.CoolSetpoint, HeatNextPeriod: 
+        data.HeatNextPeriod,CoolNextPeriod:data.CoolNextPeriod,StatusHeat:data.StatusHeat,
+        StatusCool:data.StatusCool,FanMode:data.FanMode,ThermostatUnits: settings.tempScale]
+
+]
+
+log.debug "params = $params"
+    httpPost(params) { response ->
+        log.debug "Request was successful, $response.status"
+ 
+    }
+    
+    log.debug "SetStatus is 1 now"
+    data.SetStatus = 1
+
+}
+
+def getStatus() {
+  log.debug "Executing getStatus"
+  log.debug "enable outside temps = $enableOutdoorTemps"
+def today= new Date()
+log.debug "https://www.mytotalconnectcomfort.com/portal/Device/CheckDataSession/${settings.honeywelldevice}?_=$today.time"
+
+    def params = [
+        uri: "https://www.mytotalconnectcomfort.com/portal/Device/CheckDataSession/${settings.honeywelldevice}",
+        headers: [
+              'Accept': '*/*',
+              'DNT': '1',
+              'Cache' : 'false',
+              'dataType': 'json',
+              'Accept-Encoding': 'plain',
+              'Cache-Control': 'max-age=0',
+              'Accept-Language': 'en-US,en,q=0.8',
+              'Connection': 'keep-alive',
+              'Referer': 'https://www.mytotalconnectcomfort.com/portal',
+              'X-Requested-With': 'XMLHttpRequest',
+              'User-Agent': 'Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/28.0.1500.95 Safari/537.36',
+              'Cookie': data.cookiess        ],
+    ]
+
+		log.debug "doing request"
+        
+        httpGet(params) { response ->
+        log.debug "Request was successful, $response.status"
+        //log.debug "data = $response.data"
+        log.debug "ld = $response.data.latestData"
+       
+        def curTemp = response.data.latestData.uiData.DispTemperature
+        def fanMode = response.data.latestData.fanData.fanMode
+        def switchPos = response.data.latestData.uiData.SystemSwitchPosition
+        def coolSetPoint = response.data.latestData.uiData.CoolSetpoint
+        def heatSetPoint = response.data.latestData.uiData.HeatSetpoint
+        def statusCool = response.data.latestData.uiData.StatusCool
+        def statusHeat = response.data.latestData.uiData.StatusHeat
+        def curHumidity = response.data.latestData.uiData.IndoorHumidity
+        def Boolean hasOutdoorHumid = response.data.latestData.uiData.OutdoorHumidityAvailable
+        def Boolean hasOutdoorTemp = response.data.latestData.uiData.OutdoorTemperatureAvailable
+        def curOutdoorHumidity = response.data.latestData.uiData.OutdoorHumidity
+        def curOutdoorTemp = response.data.latestData.uiData.OutdoorTemperature
+        def displayUnits = response.data.latestData.uiData.DisplayUnits
+        def fanIsRunning = response.data.latestData.fanData.fanIsRunning
+        def equipmentStatus = response.data.latestData.uiData.EquipmentOutputStatus
+        def Boolean hasIndoorHumid = response.data.latestData.uiData.IndoorHumiditySensorAvailable
+        def curSetpointStatus = response.data.latestData.uiData.CurrentSetpointStatus
+        def TempHoldTime = response.data.latestData.uiData.TemporaryHoldUntilTime
+        def int TempHoldTimeHrs = TempHoldTime / 60
+        def TempHoldTimeMins = TempHoldTime % 60
+        
+/*ld = [fanData:[fanModeCirculateAllowed:true, fanModeAutoAllowed:true, fanModeFollowScheduleAllowed:false, 
+        fanIsRunning:false, fanModeOnAllowed:true, fanMode:0], 
+        drData:[Load:127.5, HeatSetpLimit:0,
+        OptOutable:false, DeltaHeatSP:-0.01, CoolSetpLimit:0, Phase:-1, DeltaCoolSP:-0.01], 
+        uiData:[OutdoorTemperature:128.0000, TemporaryHoldUntilTime:0, ScheduleHeatSp:67.0000, 
+        DeviceID:453824, DispTemperatureAvailable:true, VacationHold:0, VacationHoldUntilTime:0,
+        CoolSetpoint:76.0000, ScheduleCoolSp:76.0000, SwitchHeatAllowed:true, CoolNextPeriod:67, 
+        IndoorHumidity:31.0000, SwitchAutoAllowed:true, SetpointChangeAllowed:true, HeatLowerSetptLimit:40.0000,
+        OutdoorHumidStatus:128, SwitchOffAllowed:true, OutdoorHumidityAvailable:false,
+        StatusCool:0, OutdoorTemperatureAvailable:false, EquipmentOutputStatus:0, StatusHeat:0, 
+        CurrentSetpointStatus:0, HoldUntilCapable:true, CoolUpperSetptLimit:99.0000, SwitchCoolAllowed:true, 
+        OutdoorHumidity:128.0000, DualSetpointStatus:false, SwitchEmergencyHeatAllowed:false, Commercial:false, 
+        CoolLowerSetptLimit:50.0000, OutdoorHumiditySensorNotFault:true, IndoorHumiditySensorAvailable:true,
+        ScheduleCapable:true, DisplayUnits:F, DispTemperature:70.0000, Deadband:3.0000, HeatUpperSetptLimit:90.0000, 
+        IsInVacationHoldMode:false, OutdoorTemperatureSensorNotFault:true, HeatSetpoint:67.0000, DispTemperatureStatus:0,
+        HeatNextPeriod:67, IndoorHumiditySensorNotFault:true, OutdoorTempStatus:128, IndoorHumidStatus:0, 
+        SystemSwitchPosition:4], canControlHumidification:false, hasFan:true] 
+        
+        log.trace("Fan operating state: ${response.data.latestData.fanData.fanIsRunning}")
+        log.trace("EquipmentOutputStatus: ${response.data.latestData.uiData.EquipmentOutputStatus}")
+        log.trace("IndoorHumidity: ${response.data.latestData.uiData.IndoorHumidity}")
+          
+        log.trace("OutdoorTemp = ${response.data.latestData.uiData.OutdoorTemperature}")
+        log.trace("fanMode: ${response.data.latestData.fanData.fanMode}")
+        log.trace("SystenSwitchPosition: ${response.data.latestData.uiData.SystemSwitchPosition}")
+        log.trace("StatusCool: ${response.data.latestData.uiData.StatusCool}")
+        log.trace("StatusHeat: ${response.data.latestData.uiData.StatusHeat}")
+        
+        log.trace("IndoorHumiditySensorAvailable: ${response.data.latestData.uiData.IndoorHumiditySensorAvailable}")        
+        log.trace("IndoorHumidityAvailable: ${response.data.latestData.uiData.IndoorHumidityAvailable}")        
+       
+        log.debug "OutdoorHumidityAvailable: response.data.latestData.uiData.OutdoorHumidityAvailable"        
+        log.debug "OutdoorTemperatureAvailable: $response.data.latestData.uiData.OutdoorTemperatureAvailable"        
+        
+		log.debug "OutdoorHumiditySensorNotFault = $response.data.latestData.uiData.OutdoorHumiditySensorNotFault"
+		log.debug "OutdoorTemperatureSensorNotFault = $response.data.latestData.uiData.OutdoorTemperatureSensorNotFault"
+          
+        log.debug "IndoorHumiditySensorNotFault: $response.data.latestData.uiData.IndoorHumiditySensorNotFault"        
+        log.debug "IndoorHumidStatus: $response.data.latestData.uiData.IndoorHumidStatus"       
+        log.debug "OutdoorHumidStatus: $response.data.latestData.uiData.OutdoorHumidStatus"   
+        log.debug "OutdoorHumidity: = $response.data.latestData.uiData.OutdoorHumidity"
+        log.debug "OutdoorTemperature = $response.data.latestData.uiData.OutdoorTemperature"
+        
+        log.debug "got curOutdoorTemp = $curOutdoorTemp"
+        log.debug "got curOutdoorHumidity = $curOutdoorHumidity"
+        log.debug "hasOutdoorHumid = $hasOutdoorHumid"
+        log.debug "hasOutdoorTemp =  $hasOutdoorTemp"
+      */
+      
+      //  log.debug "displayUnits = $displayUnits"
+        state.DisplayUnits = $displayUnits
+        
+        //Operating State Section 
+        //Set the operating state to off 
+        
+        def operatingState = "Unknown"
+          
+// lgk operating state not working here.. shows both on ie 1 when heat doesnt go on to 67 and heat till 76  and current is 73 
+        //Check the status of heat and cool 
+     
+     // lgk old method now use equipment status
+     if (equipmentStatus == 1) {
+        operatingState = "HEAT ON"
+      } else if (equipmentStatus == 2) {
+        operatingState = "COOL ON"
+      } else if (equipmentStatus == 0) {
+        operatingState = "IDLE"
+      } else {
+          	operatingState = "Unknown"
+      }
+      
+     if(curSetpointStatus == 0) {
+            operatingState = "$operatingState\nControl By\nFollowing\nSchedule"
+        } else if(curSetpointStatus == 1) {  
+            operatingState = "$operatingState\nControl By\nHold Until\n" + String.format("%02d:%02d", TempHoldTimeHrs, TempHoldTimeMins)
+        } else if(curSetpointStatus == 2) {
+            operatingState = "$operatingState\nControl By\nPermanent\nHold"
+      
+        } else {
+            operatingState = "unknown"
+        }
+      
+      /*
+     if(statusCool == 1 && (switchPos == 3 || switchPos == 5 || swithPos == 4)) {
+            operatingState = "cooling"
+        } else if (statusHeat == 1 && (switchPos == 1 || switchPos == 5 || switchPos == 4)) {  
+            operatingState = "heating"
+        } else if (statusCool == 0 && statusHeat == 0) {
+            operatingState = "idle"
+           
+        } else {
+          	operatingState = "unknown"
+        }
+        */
+
+        log.trace("Set operating State to: ${operatingState}")        
+
+     // set fast state
+     def fanState = "Unknown"
+
+	if (fanIsRunning == true)
+      fanState = "On"
+    else fanState = "Idle" 
+
+    log.trace("Set Fan operating State to: ${fanState}")        
+
+        //End Operating State
+        
+      //  log.debug curTemp
+       // log.debug fanMode
+       // log.debug switchPos
+       
+        //fan mode 0=auto, 2=circ, 1=on
+        
+        if(fanMode==0)
+          fanMode = 'auto'
+        if(fanMode==1)
+          fanMode = 'on'
+        if(fanMode==2)
+          fanMode = 'circulate'
+
+        if(switchPos==1)
+          switchPos = 'heat'
+        if(switchPos==2)
+          switchPos = 'off'
+        if(switchPos==3)
+          switchPos = 'cool'
+        if(switchPos==4 || switchPos==5)
+          switchPos = 'auto'
+
+    def formattedCoolSetPoint = String.format("%5.1f", coolSetPoint)
+    def formattedHeatSetPoint = String.format("%5.1f", heatSetPoint)
+    def formattedTemp = String.format("%5.1f", curTemp)
+    
+   	def finalCoolSetPoint = formattedCoolSetPoint as BigDecimal
+	def finalHeatSetPoint = formattedHeatSetPoint as BigDecimal
+	def finalTemp = formattedTemp as BigDecimal
+
+	//Send events 
+        sendEvent(name: 'thermostatOperatingState', value: operatingState)
+        sendEvent(name: 'fanOperatingState', value: fanState)
+        sendEvent(name: 'thermostatFanMode', value: fanMode)
+        sendEvent(name: 'thermostatMode', value: switchPos)
+        sendEvent(name: 'coolingSetpoint', value: finalCoolSetPoint )
+        sendEvent(name: 'heatingSetpoint', value: finalHeatSetPoint )
+        sendEvent(name: 'temperature', value: finalTemp, state: switchPos)
+        if (hasIndoorHumid){sendEvent(name: 'relativeHumidity', value: curHumidity as Integer)}
+        
+       if (settings.tzOffset == null)
+        settings.tzOffset = -5
+
+        def now = new Date()
+        def tf = new java.text.SimpleDateFormat("MM/dd/yyyy h:mm a")
+        tf.setTimeZone(TimeZone.getTimeZone("GMT${settings.tzOffset}"))
+        def newtime = "${tf.format(now)}" as String   
+        sendEvent(name: "lastUpdate", value: newtime, descriptionText: "Last Update: $newtime")
+
+        
+      if (enableOutdoorTemps == "Yes")
+        {
+    
+       if (hasOutdoorHumid)
+        {
+          sendEvent(name: 'outdoorHumidity', value: curOutdoorHumidity as Integer)
+        }
+     
+       if (hasOutdoorTemp)
+        {
+          sendEvent(name: 'outdoorTemperature', value: curOutdoorTemp as Integer)
+        }
+      }
+      
+    
+        
+
+}
+}
+
+
+def getHumidifierStatus()
+{
+/*
+ $.ajax({
+            url: humUrl,
+            type: 'POST',
+            cache: false,
+            dataType: "json",
+            success: function(data) {
+            /portal/Device/Menu/GetHumData/454832';
+     */
+    def params = [
+        uri: "https://www.mytotalconnectcomfort.com/portal/Device/Menu/GetHumData/${settings.honeywelldevice}",
+        headers: [
+              'Accept': '*/*',
+              'DNT': '1',
+              'dataType': 'json',
+              'cache': 'false',
+              'Accept-Encoding': 'plain',
+              'Cache-Control': 'max-age=0',
+              'Accept-Language': 'en-US,en,q=0.8',
+              'Connection': 'keep-alive',
+              'Host': 'rs.alarmnet.com',
+              'Referer': 'https://www.mytotalconnectcomfort.com/portal/Menu/${settings.honeywelldevice}',
+              'X-Requested-With': 'XMLHttpRequest',
+              'User-Agent': 'Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/28.0.1500.95 Safari/537.36',
+              'Cookie': data.cookiess        ],
+    ]
+        httpGet(params) { response ->
+        log.debug "GetHumidity Request was successful, $response.status"
+        log.debug "response = $response.data"
+       
+      //  log.debug "ld = $response.data.latestData"
+       //  log.debug "humdata = $response.data.latestData.humData"
+
+        log.trace("lowerLimit: ${response.data.latestData.humData.lowerLimit}")        
+        log.trace("upperLimit: ${response.data.humData.upperLimit}")        
+        log.trace("SetPoint: ${response.data.humData.Setpoint}")        
+        log.trace("DeviceId: ${response.data.humData.DeviceId}")        
+        log.trace("IndoorHumidity: ${response.data.humData.IndoorHumidity}")        
+
+}
+}
+
+def api(method, args = [], success = {}) {
+
+}
+
+// Need to be logged in before this is called. So don't call this. Call api.
+def doRequest(uri, args, type, success) {
+
+}
+
+def refresh() {
+  log.debug "Executing 'refresh'"
+  def unit = getTemperatureScale()
+  log.debug "units = $unit"
+    login()
+    //getHumidifierStatus()
+    getStatus()
+}
+
+def login() {  
+  log.debug "Executing 'login'"
+      
+    def params = [
+        uri: 'https://www.mytotalconnectcomfort.com/portal',
+        headers: [
+            'Content-Type': 'application/x-www-form-urlencoded',
+            'Accept': 'text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8',
+            'Accept-Encoding': 'sdch',
+            'Host': 'www.mytotalconnectcomfort.com',
+            'DNT': '1',
+            'Origin': 'www.mytotalconnectcomfort.com/portal/',
+            'User-Agent': 'Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/28.0.1500.95 Safari/537.36'
+        ],
+        body: [timeOffset: '240', UserName: "${settings.username}", Password: "${settings.password}", RememberMe: 'false']
+    ]
+
+  data.cookiess = ''
+
+    httpPost(params) { response ->
+        log.debug "Request was successful, $response.status"
+        log.debug response.headers
+    response.getHeaders('Set-Cookie').each {
+          String cookie = it.value.split(';|,')[0]
+      log.debug "Adding cookie to collection: $cookie"
+            if(cookie != ".ASPXAUTH_TH_A=") {
+      data.cookiess = data.cookiess+cookie+';'
+            }
+        }
+        log.debug "cookies: $data.cookiess"
+
+    }
+}
+
+def isLoggedIn() {
+    if(!data.auth) {
+        log.debug "No data.auth"
+        return false
+    }
+    
+    def now = new Date().getTime();
+    return data.auth.expires_in > now
+}
+
+
+def updated()
+{
+log.debug "in updated"
+state.DisplayUnits = settings.tempScale
+ log.debug "display units now = $state.DisplayUnits"
+   
+}
+
+def installed() {
+  state.DisplayUnits = settings.tempScale
+  
+  log.debug "display units now = $state.DisplayUnits"
+}

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -326,6 +326,7 @@ def addBulbs() {
                         d = addChildDevice("smartthings", "Hue Bulb", dni, newHueBulb?.value.hub, ["label":newHueBulb?.value.name])
                     }
                     log.debug "created ${d.displayName} with id $dni"
+                    d.refresh()
                 } else {
                 	log.debug "$dni in not longer paired to the Hue Bridge or ID changed"
                 }
@@ -333,8 +334,8 @@ def addBulbs() {
             	//backwards compatable
 				newHueBulb = bulbs.find { (app.id + "/" + it.id) == dni }
 				d = addChildDevice("smartthings", "Hue Bulb", dni, newHueBulb?.hub, ["label":newHueBulb?.name])
+                d.refresh()
 			}
-			d.refresh()
 		} else {
 			log.debug "found ${d.displayName} with id $dni already exists, type: '$d.typeName'"
 			if (bulbs instanceof java.util.Map) {