MSA-884: This is a quick update to a previously published device handler to accept the "update" packet that occurs when the zigbee pairs with the hub to stop an exception due to it not being in the map format that other packets are in.

Rolling up changes to staging from master

devicetypes/osotech/plantlink.src/plantlink.groovy

@@ -120,7 +120,7 @@ def setInstallSmartApp(value){
 }
 
 def parse(String description) {
-
+	log.debug description
 	def description_map = parseDescriptionAsMap(description)
     def event_name = ""
     def measurement_map = [
@@ -129,10 +129,7 @@ def parse(String description) {
             zigbeedeviceid: device.zigbeeId,
             created: new Date().time /1000 as int
     ]
-    if (description_map.cluster == "0000"){
+    if (description_map.cluster == "0001"){
-    	/* version number, not used */
-        
-    } else if (description_map.cluster == "0001"){
         /* battery voltage in mV (device needs minimium 2.1v to run) */
         log.debug "PlantLink - id ${device.zigbeeId} battery ${description_map.value}"
         event_name = "battery_status"
@@ -158,6 +155,10 @@ def parse(String description) {
 def parseDescriptionAsMap(description) {
     (description - "read attr - ").split(",").inject([:]) { map, param ->
         def nameAndValue = param.split(":")
+        if(nameAndValue.length == 2){
 	        map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
+        }else{
+        	map += []
+        }
     }
 }

devicetypes/smartthings/ecobee-sensor.src/ecobee-sensor.groovy

@@ -22,10 +22,6 @@ metadata {
 		capability "Polling"
 	}
 
-	simulator {
-		// TODO: define status and reply messages here
-	}
-
 	tiles {
 		valueTile("temperature", "device.temperature", width: 2, height: 2) {
 			state("temperature", label:'${currentValue}°', unit:"F",
@@ -56,16 +52,12 @@ metadata {
 }
 
 def refresh() {
-	log.debug "refresh..."
+	log.debug "refresh called"
 	poll()
 }
 
 void poll() {
 	log.debug "Executing 'poll' using parent SmartApp"
-	parent.pollChildren(this)
+	parent.pollChild(this)
-}
 
-//generate custom mobile activity feeds event
-def generateActivityFeedsEvent(notificationMessage) {
-	sendEvent(name: "notificationMessage", value: "$device.displayName $notificationMessage", descriptionText: "$device.displayName $notificationMessage", displayed: true)
 }

devicetypes/smartthings/ecobee-thermostat.src/ecobee-thermostat.groovy

@@ -19,9 +19,11 @@ metadata {
 	definition (name: "Ecobee Thermostat", namespace: "smartthings", author: "SmartThings") {
 		capability "Actuator"
 		capability "Thermostat"
+		capability "Temperature Measurement"
 		capability "Polling"
 		capability "Sensor"
 		capability "Refresh"
+		capability "Relative Humidity Measurement"
 
 		command "generateEvent"
 		command "raiseSetpoint"
@@ -31,10 +33,13 @@ metadata {
 
 		attribute "thermostatSetpoint","number"
 		attribute "thermostatStatus","string"
+		attribute "maxHeatingSetpoint", "number"
+		attribute "minHeatingSetpoint", "number"
+		attribute "maxCoolingSetpoint", "number"
+		attribute "minCoolingSetpoint", "number"
+		attribute "deviceTemperatureUnit", "number"
 	}
 
-	simulator { }
-
 	tiles {
 		valueTile("temperature", "device.temperature", width: 2, height: 2) {
 			state("temperature", label:'${currentValue}°', unit:"F",
@@ -94,8 +99,11 @@ metadata {
 			state "resume", action:"resumeProgram", nextState: "updating", label:'Resume Schedule', icon:"st.samsung.da.oven_ic_send"
 			state "updating", label:"Working", icon: "st.secondary.secondary"
 		}
+		valueTile("humidity", "device.humidity", decoration: "flat") {
+			state "humidity", label:'${currentValue}% humidity'
+		}
 		main "temperature"
-		details(["temperature", "upButtonControl", "thermostatSetpoint", "currentStatus", "downButtonControl", "mode", "resumeProgram", "refresh"])
+		details(["temperature", "upButtonControl", "thermostatSetpoint", "currentStatus", "downButtonControl", "mode", "resumeProgram", "refresh", "humidity"])
 	}
 
 	preferences {
@@ -107,8 +115,6 @@ metadata {
 // parse events into attributes
 def parse(String description) {
 	log.debug "Parsing '${description}'"
-	// TODO: handle '' attribute
-
 }
 
 def refresh() {
@@ -135,14 +141,22 @@ def generateEvent(Map results) {
 			def event = [name: name, linkText: linkText, descriptionText: getThermostatDescriptionText(name, value, linkText),
 						 handlerName: name]
 
-			if (name=="temperature" || name=="heatingSetpoint" || name=="coolingSetpoint") {
+			if (name=="temperature" || name=="heatingSetpoint" || name=="coolingSetpoint" ) {
-				def sendValue = value? convertTemperatureIfNeeded(value.toDouble(), "F", 1): value //API return temperature value in F
+				def sendValue = convertTemperatureIfNeeded(value.toDouble(), "F", 1) //API return temperature value in F
+				sendValue =  location.temperatureScale == "C"? roundC(sendValue) : sendValue
 				isChange = isTemperatureStateChange(device, name, value.toString())
 				isDisplayed = isChange
 				event << [value: sendValue, isStateChange: isChange, displayed: isDisplayed]
+			}  else if (name=="maxCoolingSetpoint" || name=="minCoolingSetpoint" || name=="maxHeatingSetpoint" || name=="minHeatingSetpoint") {
+				def sendValue = convertTemperatureIfNeeded(value.toDouble(), "F", 1) //API return temperature value in F
+				sendValue =  location.temperatureScale == "C"? roundC(sendValue) : sendValue
+				event << [value: sendValue, displayed: false]
 			}  else if (name=="heatMode" || name=="coolMode" || name=="autoMode" || name=="auxHeatMode"){
 				isChange = isStateChange(device, name, value.toString())
 				event << [value: value.toString(), isStateChange: isChange, displayed: false]
+			}  else if (name=="humidity") {
+				isChange = isStateChange(device, name, value.toString())
+				event << [value: value.toString(), isStateChange: isChange, displayed: false, unit: "%"]
 			}  else {
 				isChange = isStateChange(device, name, value.toString())
 				isDisplayed = isChange
@@ -158,13 +172,19 @@ def generateEvent(Map results) {
 //return descriptionText to be shown on mobile activity feed
 private getThermostatDescriptionText(name, value, linkText) {
 	if(name == "temperature") {
-		return "$linkText temperature is $value°F"
+		def sendValue = convertTemperatureIfNeeded(value.toDouble(), "F", 1) //API return temperature value in F
+		sendValue =  location.temperatureScale == "C"? roundC(sendValue) : sendValue
+		return "$linkText temperature is $sendValue ${location.temperatureScale}"
 
 	} else if(name == "heatingSetpoint") {
-		return "heating setpoint is $value°F"
+		def sendValue = convertTemperatureIfNeeded(value.toDouble(), "F", 1) //API return temperature value in F
+		sendValue =  location.temperatureScale == "C"? roundC(sendValue) : sendValue
+		return "heating setpoint is $sendValue ${location.temperatureScale}"
 
 	} else if(name == "coolingSetpoint"){
-		return "cooling setpoint is $value°F"
+		def sendValue = convertTemperatureIfNeeded(value.toDouble(), "F", 1) //API return temperature value in F
+		sendValue =  location.temperatureScale == "C"? roundC(sendValue) : sendValue
+		return "cooling setpoint is $sendValue ${location.temperatureScale}"
 
 	} else if (name == "thermostatMode") {
 		return "thermostat mode is ${value}"
@@ -172,26 +192,26 @@ private getThermostatDescriptionText(name, value, linkText) {
 	} else if (name == "thermostatFanMode") {
 		return "thermostat fan mode is ${value}"
 
+	} else if (name == "humidity") {
+		return "humidity is ${value} %"
 	} else {
 		return "${name} = ${value}"
 	}
 }
 
 void setHeatingSetpoint(setpoint) {
-	setHeatingSetpoint(setpoint.toDouble())
+	log.debug "***heating setpoint $setpoint"
-}
+	def heatingSetpoint = setpoint.toDouble()
-
-void setHeatingSetpoint(Double setpoint) {
-//    def mode = device.currentValue("thermostatMode")
-	def heatingSetpoint = setpoint
 	def coolingSetpoint = device.currentValue("coolingSetpoint").toDouble()
 	def deviceId = device.deviceNetworkId.split(/\./).last()
+	def maxHeatingSetpoint = device.currentValue("maxHeatingSetpoint").toDouble()
+	def minHeatingSetpoint = device.currentValue("minHeatingSetpoint").toDouble()
 
 	//enforce limits of heatingSetpoint
-	if (heatingSetpoint > 79) {
+	if (heatingSetpoint > maxHeatingSetpoint) {
-		heatingSetpoint = 79
+		heatingSetpoint = maxHeatingSetpoint
-	} else if (heatingSetpoint < 45) {
+	} else if (heatingSetpoint < minHeatingSetpoint) {
-		heatingSetpoint = 45
+		heatingSetpoint = minHeatingSetpoint
 	}
 
 	//enforce limits of heatingSetpoint vs coolingSetpoint
@@ -201,32 +221,34 @@ void setHeatingSetpoint(Double setpoint) {
 
 	log.debug "Sending setHeatingSetpoint> coolingSetpoint: ${coolingSetpoint}, heatingSetpoint: ${heatingSetpoint}"
 
+	def coolingValue = location.temperatureScale == "C"? convertCtoF(coolingSetpoint) : coolingSetpoint
+	def heatingValue = location.temperatureScale == "C"? convertCtoF(heatingSetpoint) : heatingSetpoint
+
 	def sendHoldType = holdType ? (holdType=="Temporary")? "nextTransition" : (holdType=="Permanent")? "indefinite" : "indefinite" : "indefinite"
-	if (parent.setHold (this, heatingSetpoint,  coolingSetpoint, deviceId, sendHoldType)) {
+	if (parent.setHold(this, heatingValue, coolingValue, deviceId, sendHoldType)) {
 		sendEvent("name":"heatingSetpoint", "value":heatingSetpoint)
 		sendEvent("name":"coolingSetpoint", "value":coolingSetpoint)
 		log.debug "Done setHeatingSetpoint> coolingSetpoint: ${coolingSetpoint}, heatingSetpoint: ${heatingSetpoint}"
 		generateSetpointEvent()
 		generateStatusEvent()
 	} else {
-		log.error "Error setHeatingSetpoint(setpoint)" //This error is handled by the connect app
+		log.error "Error setHeatingSetpoint(setpoint)"
 	}
 }
 
 void setCoolingSetpoint(setpoint) {
-	setCoolingSetpoint(setpoint.toDouble())
+	log.debug "***cooling setpoint $setpoint"
-}
-
-void setCoolingSetpoint(Double setpoint) {
-//    def mode = device.currentValue("thermostatMode")
 	def heatingSetpoint = device.currentValue("heatingSetpoint").toDouble()
-	def coolingSetpoint = setpoint
+	def coolingSetpoint = setpoint.toDouble()
 	def deviceId = device.deviceNetworkId.split(/\./).last()
+	def maxCoolingSetpoint = device.currentValue("maxCoolingSetpoint").toDouble()
+	def minCoolingSetpoint = device.currentValue("minCoolingSetpoint").toDouble()
 
-	if (coolingSetpoint > 92) {
+
-		coolingSetpoint = 92
+	if (coolingSetpoint > maxCoolingSetpoint) {
-	} else if (coolingSetpoint < 65) {
+		coolingSetpoint = maxCoolingSetpoint
-		coolingSetpoint = 65
+	} else if (coolingSetpoint < minCoolingSetpoint) {
+		coolingSetpoint = minCoolingSetpoint
 	}
 
 	//enforce limits of heatingSetpoint vs coolingSetpoint
@@ -236,15 +258,18 @@ void setCoolingSetpoint(Double setpoint) {
 
 	log.debug "Sending setCoolingSetpoint> coolingSetpoint: ${coolingSetpoint}, heatingSetpoint: ${heatingSetpoint}"
 
+	def coolingValue = location.temperatureScale == "C"? convertCtoF(coolingSetpoint) : coolingSetpoint
+	def heatingValue = location.temperatureScale == "C"? convertCtoF(heatingSetpoint) : heatingSetpoint
+
 	def sendHoldType = holdType ? (holdType=="Temporary")? "nextTransition" : (holdType=="Permanent")? "indefinite" : "indefinite" : "indefinite"
-	if (parent.setHold (this, heatingSetpoint,  coolingSetpoint, deviceId, sendHoldType)) {
+	if (parent.setHold(this, heatingValue, coolingValue, deviceId, sendHoldType)) {
 		sendEvent("name":"heatingSetpoint", "value":heatingSetpoint)
 		sendEvent("name":"coolingSetpoint", "value":coolingSetpoint)
 		log.debug "Done setCoolingSetpoint>> coolingSetpoint = ${coolingSetpoint}, heatingSetpoint = ${heatingSetpoint}"
 		generateSetpointEvent()
 		generateStatusEvent()
 	} else {
-		log.error "Error setCoolingSetpoint(setpoint)" //This error is handled by the connect app
+		log.error "Error setCoolingSetpoint(setpoint)"
 	}
 }
 
@@ -448,25 +473,21 @@ def auto() {
 def fanOn() {
 	log.debug "fanOn"
 //    parent.setFanMode (this,"on")
-
 }
 
 def fanAuto() {
 	log.debug "fanAuto"
 //    parent.setFanMode (this,"auto")
-
 }
 
 def fanCirculate() {
 	log.debug "fanCirculate"
 //    parent.setFanMode (this,"circulate")
-
 }
 
 def fanOff() {
 	log.debug "fanOff"
 //    parent.setFanMode (this,"off")
-
 }
 
 def generateSetpointEvent() {
@@ -476,20 +497,41 @@ def generateSetpointEvent() {
 	def mode = device.currentValue("thermostatMode")
 	log.debug "Current Mode = ${mode}"
 
-	def heatingSetpoint = device.currentValue("heatingSetpoint").toInteger()
+	def heatingSetpoint = device.currentValue("heatingSetpoint")
 	log.debug "Heating Setpoint = ${heatingSetpoint}"
 
-	def coolingSetpoint = device.currentValue("coolingSetpoint").toInteger()
+	def coolingSetpoint = device.currentValue("coolingSetpoint")
 	log.debug "Cooling Setpoint = ${coolingSetpoint}"
 
+	def maxHeatingSetpoint = device.currentValue("maxHeatingSetpoint")
+	def maxCoolingSetpoint = device.currentValue("maxCoolingSetpoint")
+	def minHeatingSetpoint = device.currentValue("minHeatingSetpoint")
+	def minCoolingSetpoint = device.currentValue("minCoolingSetpoint")
+
+	if(location.temperatureScale == "C")
+	{
+		maxHeatingSetpoint = roundC(maxHeatingSetpoint)
+		maxCoolingSetpoint = roundC(maxCoolingSetpoint)
+		minHeatingSetpoint = roundC(minHeatingSetpoint)
+		minCoolingSetpoint = roundC(minCoolingSetpoint)
+		heatingSetpoint = roundC(heatingSetpoint)
+		coolingSetpoint = roundC(coolingSetpoint)
+	}
+
+	sendEvent("name":"maxHeatingSetpoint", "value":maxHeatingSetpoint, "unit":location.temperatureScale)
+	sendEvent("name":"maxCoolingSetpoint", "value":maxCoolingSetpoint, "unit":location.temperatureScale)
+	sendEvent("name":"minHeatingSetpoint", "value":minHeatingSetpoint, "unit":location.temperatureScale)
+	sendEvent("name":"minCoolingSetpoint", "value":minCoolingSetpoint, "unit":location.temperatureScale)
+
+
 	if (mode == "heat") {
 
-		sendEvent("name":"thermostatSetpoint", "value":heatingSetpoint.toString())
+		sendEvent("name":"thermostatSetpoint", "value":heatingSetpoint )
 
 	}
 	else if (mode == "cool") {
 
-		sendEvent("name":"thermostatSetpoint", "value":coolingSetpoint.toString())
+		sendEvent("name":"thermostatSetpoint", "value":coolingSetpoint)
 
 	} else if (mode == "auto") {
 
@@ -499,9 +541,9 @@ def generateSetpointEvent() {
 
 		sendEvent("name":"thermostatSetpoint", "value":"Off")
 
-	} else if (mode == "emergencyHeat") {
+	} else if (mode == "auxHeatOnly") {
 
-		sendEvent("name":"thermostatSetpoint", "value":heatingSetpoint.toString())
+		sendEvent("name":"thermostatSetpoint", "value":heatingSetpoint)
 
 	}
 
@@ -510,26 +552,30 @@ def generateSetpointEvent() {
 void raiseSetpoint() {
 	def mode = device.currentValue("thermostatMode")
 	def targetvalue
+	def maxHeatingSetpoint = device.currentValue("maxHeatingSetpoint")
+	def maxCoolingSetpoint = device.currentValue("maxCoolingSetpoint")
+
 
 	if (mode == "off" || mode == "auto") {
 		log.warn "this mode: $mode does not allow raiseSetpoint"
 	} else {
-		def heatingSetpoint = device.currentValue("heatingSetpoint").toInteger()
+		def heatingSetpoint = device.currentValue("heatingSetpoint")
-		def coolingSetpoint = device.currentValue("coolingSetpoint").toInteger()
+		def coolingSetpoint = device.currentValue("coolingSetpoint")
-		def thermostatSetpoint = device.currentValue("thermostatSetpoint").toInteger()
+		def thermostatSetpoint = device.currentValue("thermostatSetpoint")
 		log.debug "raiseSetpoint() mode = ${mode}, heatingSetpoint: ${heatingSetpoint}, coolingSetpoint:${coolingSetpoint}, thermostatSetpoint:${thermostatSetpoint}"
 
 		if (device.latestState('thermostatSetpoint')) {
-			targetvalue = device.latestState('thermostatSetpoint').value as Integer
+			targetvalue = device.latestState('thermostatSetpoint').value
+			targetvalue = location.temperatureScale == "F"? targetvalue.toInteger() : targetvalue.toDouble()
 		} else {
 			targetvalue = 0
 		}
-		targetvalue = targetvalue + 1
+		targetvalue = location.temperatureScale == "F"? targetvalue + 1 : targetvalue + 0.5
 
-		if (mode == "heat" && targetvalue > 79) {
+		if ((mode == "heat" || mode == "auxHeatOnly") && targetvalue > maxHeatingSetpoint) {
-			targetvalue = 79
+			targetvalue = maxHeatingSetpoint
-		} else if (mode == "cool" && targetvalue > 92) {
+		} else if (mode == "cool" && targetvalue > maxCoolingSetpoint) {
-			targetvalue = 92
+			targetvalue = maxCoolingSetpoint
 		}
 
 		sendEvent("name":"thermostatSetpoint", "value":targetvalue, displayed: false)
@@ -543,25 +589,29 @@ void raiseSetpoint() {
 void lowerSetpoint() {
 	def mode = device.currentValue("thermostatMode")
 	def targetvalue
+	def minHeatingSetpoint = device.currentValue("minHeatingSetpoint")
+	def minCoolingSetpoint = device.currentValue("minCoolingSetpoint")
+
 
 	if (mode == "off" || mode == "auto") {
 		log.warn "this mode: $mode does not allow lowerSetpoint"
 	} else {
-		def heatingSetpoint = device.currentValue("heatingSetpoint").toInteger()
+		def heatingSetpoint = device.currentValue("heatingSetpoint")
-		def coolingSetpoint = device.currentValue("coolingSetpoint").toInteger()
+		def coolingSetpoint = device.currentValue("coolingSetpoint")
-		def thermostatSetpoint = device.currentValue("thermostatSetpoint").toInteger()
+		def thermostatSetpoint = device.currentValue("thermostatSetpoint")
 		log.debug "lowerSetpoint() mode = ${mode}, heatingSetpoint: ${heatingSetpoint}, coolingSetpoint:${coolingSetpoint}, thermostatSetpoint:${thermostatSetpoint}"
 		if (device.latestState('thermostatSetpoint')) {
-			targetvalue = device.latestState('thermostatSetpoint').value as Integer
+			targetvalue = device.latestState('thermostatSetpoint').value
+			targetvalue = location.temperatureScale == "F"? targetvalue.toInteger() : targetvalue.toDouble()
 		} else {
 			targetvalue = 0
 		}
-		targetvalue = targetvalue - 1
+		targetvalue = location.temperatureScale == "F"? targetvalue - 1 : targetvalue - 0.5
 
-		if (mode == "heat" && targetvalue.toInteger() < 45) {
+		if ((mode == "heat" || mode == "auxHeatOnly") && targetvalue < minHeatingSetpoint) {
-			targetvalue = 45
+			targetvalue = minHeatingSetpoint
-		} else if (mode == "cool" && targetvalue.toInteger() < 65) {
+		} else if (mode == "cool" && targetvalue < minCoolingSetpoint) {
-			targetvalue = 65
+			targetvalue = minCoolingSetpoint
 		}
 
 		sendEvent("name":"thermostatSetpoint", "value":targetvalue, displayed: false)
@@ -575,15 +625,15 @@ void lowerSetpoint() {
 void alterSetpoint(temp) {
 
 	def mode = device.currentValue("thermostatMode")
-	def heatingSetpoint = device.currentValue("heatingSetpoint").toInteger()
+	def heatingSetpoint = device.currentValue("heatingSetpoint")
-	def coolingSetpoint = device.currentValue("coolingSetpoint").toInteger()
+	def coolingSetpoint = device.currentValue("coolingSetpoint")
 	def deviceId = device.deviceNetworkId.split(/\./).last()
 
 	def targetHeatingSetpoint
 	def targetCoolingSetpoint
 
 	//step1: check thermostatMode, enforce limits before sending request to cloud
-	if (mode == "heat"){
+	if (mode == "heat" || mode == "auxHeatOnly"){
 		if (temp.value > coolingSetpoint){
 			targetHeatingSetpoint = temp.value
 			targetCoolingSetpoint = temp.value
@@ -602,19 +652,22 @@ void alterSetpoint(temp) {
 		}
 	}
 
-	log.debug "alterSetpoint >> in mode ${mode} trying to change heatingSetpoint to ${targetHeatingSetpoint} " +
+	log.debug "alterSetpoint >> in mode ${mode} trying to change heatingSetpoint to $targetHeatingSetpoint " +
-			"coolingSetpoint to ${targetCoolingSetpoint} with holdType : ${holdType}"
+			"coolingSetpoint to $targetCoolingSetpoint with holdType : ${holdType}"
 
 	def sendHoldType = holdType ? (holdType=="Temporary")? "nextTransition" : (holdType=="Permanent")? "indefinite" : "indefinite" : "indefinite"
-	//step2: call parent.setHold to send http request to 3rd party cloud
+
-	if (parent.setHold(this, targetHeatingSetpoint, targetCoolingSetpoint, deviceId, sendHoldType)) {
+	def coolingValue = location.temperatureScale == "C"? convertCtoF(targetCoolingSetpoint) : targetCoolingSetpoint
-		sendEvent("name": "thermostatSetpoint", "value": temp.value.toString(), displayed: false)
+	def heatingValue = location.temperatureScale == "C"? convertCtoF(targetHeatingSetpoint) : targetHeatingSetpoint
+
+	if (parent.setHold(this, heatingValue, coolingValue, deviceId, sendHoldType)) {
+		sendEvent("name": "thermostatSetpoint", "value": temp.value, displayed: false)
 		sendEvent("name": "heatingSetpoint", "value": targetHeatingSetpoint)
 		sendEvent("name": "coolingSetpoint", "value": targetCoolingSetpoint)
 		log.debug "alterSetpoint in mode $mode succeed change setpoint to= ${temp.value}"
 	} else {
 		log.error "Error alterSetpoint()"
-		if (mode == "heat"){
+		if (mode == "heat" || mode == "auxHeatOnly"){
 			sendEvent("name": "thermostatSetpoint", "value": heatingSetpoint.toString(), displayed: false)
 		} else if (mode == "cool") {
 			sendEvent("name": "thermostatSetpoint", "value": coolingSetpoint.toString(), displayed: false)
@@ -626,9 +679,9 @@ void alterSetpoint(temp) {
 def generateStatusEvent() {
 
 	def mode = device.currentValue("thermostatMode")
-	def heatingSetpoint = device.currentValue("heatingSetpoint").toInteger()
+	def heatingSetpoint = device.currentValue("heatingSetpoint")
-	def coolingSetpoint = device.currentValue("coolingSetpoint").toInteger()
+	def coolingSetpoint = device.currentValue("coolingSetpoint")
-	def temperature = device.currentValue("temperature").toInteger()
+	def temperature = device.currentValue("temperature")
 
 	def statusText
 
@@ -643,14 +696,14 @@ def generateStatusEvent() {
 		if (temperature >= heatingSetpoint)
 			statusText = "Right Now: Idle"
 		else
-			statusText = "Heating to ${heatingSetpoint}° F"
+			statusText = "Heating to ${heatingSetpoint} ${location.temperatureScale}"
 
 	} else if (mode == "cool") {
 
 		if (temperature <= coolingSetpoint)
 			statusText = "Right Now: Idle"
 		else
-			statusText = "Cooling to ${coolingSetpoint}° F"
+			statusText = "Cooling to ${coolingSetpoint} ${location.temperatureScale}"
 
 	} else if (mode == "auto") {
 
@@ -660,7 +713,7 @@ def generateStatusEvent() {
 
 		statusText = "Right Now: Off"
 
-	} else if (mode == "emergencyHeat") {
+	} else if (mode == "auxHeatOnly") {
 
 		statusText = "Emergency Heat"
 
@@ -673,7 +726,18 @@ def generateStatusEvent() {
 	sendEvent("name":"thermostatStatus", "value":statusText, "description":statusText, displayed: true)
 }
 
-//generate custom mobile activity feeds event
 def generateActivityFeedsEvent(notificationMessage) {
 	sendEvent(name: "notificationMessage", value: "$device.displayName $notificationMessage", descriptionText: "$device.displayName $notificationMessage", displayed: true)
 }
+
+def roundC (tempC) {
+	return (Math.round(tempC.toDouble() * 2))/2
+}
+
+def convertFtoC (tempF) {
+	return String.format("%.1f", (Math.round(((tempF - 32)*(5/9)) * 2))/2)
+}
+
+def convertCtoF (tempC) {
+	return (Math.round(tempC * (9/5)) + 32).toInteger()
+}

devicetypes/smartthings/homeseer-multisensor.src/homeseer-multisensor.groovy

@@ -80,19 +80,12 @@ def parse(String description) {
 	if (cmd) {
 		result = zwaveEvent(cmd)
 	}
-	// log.debug "Parsed ${description.inspect()} to ${result.inspect()}"
+	log.debug "Parsed ${description.inspect()} to ${result.inspect()}"
 	return result
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.multiinstancev1.MultiInstanceCmdEncap cmd) {
-	def encapsulated = null
+	def encapsulated = cmd.encapsulatedCommand([0x31: 1, 0x84: 2, 0x60: 1, 0x85: 1, 0x70: 1])
-	if (cmd.respondsTo("encapsulatedCommand")) {
-		encapsulated = cmd.encapsulatedCommand()
-	} else {
-		def hex1 = { n -> String.format("%02X", n) }
-		def sorry = "command: ${hex1(cmd.commandClass)}${hex1(cmd.command)}, payload: " + cmd.parameter.collect{ hex1(it) }.join(" ")
-		encapsulated = zwave.parse(sorry, [0x31: 1, 0x84: 2, 0x60: 1, 0x85: 1, 0x70: 1])
-	}
 	return encapsulated ? zwaveEvent(encapsulated) : null
 }
 

devicetypes/smartthings/smartsense-moisture.src/smartsense-moisture.groovy

@@ -16,6 +16,7 @@ metadata {
 		capability "Water Sensor"
 		capability "Sensor"
 		capability "Battery"
+        capability "Temperature Measurement"
 
 		fingerprint deviceId: "0x2001", inClusters: "0x30,0x9C,0x9D,0x85,0x80,0x72,0x31,0x84,0x86"
 		fingerprint deviceId: "0x2101", inClusters: "0x71,0x70,0x85,0x80,0x72,0x31,0x84,0x86"
@@ -39,17 +40,29 @@ metadata {
 				attributeState "wet", label: "Wet", icon:"st.alarm.water.wet", backgroundColor:"#53a7c0"
 			}
 		}
-		standardTile("temperature", "device.temperature", width: 2, height: 2) {
+		standardTile("temperatureState", "device.temperature", width: 2, height: 2) {
 			state "normal", icon:"st.alarm.temperature.normal", backgroundColor:"#ffffff"
 			state "freezing", icon:"st.alarm.temperature.freeze", backgroundColor:"#53a7c0"
 			state "overheated", icon:"st.alarm.temperature.overheat", backgroundColor:"#F80000"
+		}
+		valueTile("temperature", "device.temperature", width: 2, height: 2) {
+            state("temperature", label:'${currentValue}°',
+                backgroundColors:[
+                    [value: 31, color: "#153591"],
+                    [value: 44, color: "#1e9cbb"],
+                    [value: 59, color: "#90d2a7"],
+                    [value: 74, color: "#44b621"],
+                    [value: 84, color: "#f1d801"],
+                    [value: 95, color: "#d04e00"],
+                    [value: 96, color: "#bc2323"]
+                ]
+            )
         }
 		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
 			state "battery", label:'${currentValue}% battery', unit:""
 		}
-
+		main (["water", "temperatureState"])
-		main (["water", "temperature"])
+		details(["water", "temperatureState", "temperature", "battery"])
-		details(["water", "temperature", "battery"])
 	}
 }
 
@@ -115,7 +128,7 @@ def zwaveEvent(physicalgraph.zwave.commands.alarmv2.AlarmReport cmd)
 		map.descriptionText = "${device.displayName} is ${map.value}"
 	}
 	if(cmd.zwaveAlarmType ==  physicalgraph.zwave.commands.alarmv2.AlarmReport.ZWAVE_ALARM_TYPE_HEAT) {
-		map.name = "temperature"
+		map.name = "temperatureState"
 		if(cmd.zwaveAlarmEvent == 1) { map.value = "overheated"}
 		if(cmd.zwaveAlarmEvent == 2) { map.value = "overheated"}
 		if(cmd.zwaveAlarmEvent == 3) { map.value = "changing temperature rapidly"}
@@ -129,17 +142,30 @@ def zwaveEvent(physicalgraph.zwave.commands.alarmv2.AlarmReport cmd)
 	map
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd)
+def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv5.SensorMultilevelReport cmd)
 {
 	def map = [:]
-	map.name = "water"
+	if(cmd.sensorType == 1) {
-	map.value = cmd.value ? "wet" : "dry"
+		map.name = "temperature"
-	map.descriptionText = "${device.displayName} is ${map.value}"
+        if(cmd.scale == 0) {
+        	map.value = getTemperature(cmd.scaledSensorValue)
+        } else {
+	        map.value = cmd.scaledSensorValue
+        }
+        map.unit = location.temperatureScale
+	}
 	map
 }
 
+def getTemperature(value) {
+	if(location.temperatureScale == "C"){
+		return value
+    } else {
+        return Math.round(celsiusToFahrenheit(value))
+    }
+}
+
 def zwaveEvent(physicalgraph.zwave.Command cmd)
 {
 	log.debug "COMMAND CLASS: $cmd"
 }
-

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -487,11 +487,6 @@ def enrollResponse() {
 }
 
 private Map parseAxis(String description) {
-	def hexToSignedInt = { hexVal ->
-		def unsignedVal = hexToInt(hexVal)
-		unsignedVal > 32767 ? unsignedVal - 65536 : unsignedVal
-	}
-
 	def z = hexToSignedInt(description[0..3])
 	def y = hexToSignedInt(description[10..13])
 	def x = hexToSignedInt(description[20..23])
@@ -518,6 +513,11 @@ private Map parseAxis(String description) {
 	getXyzResult(xyzResults, description)
 }
 
+private hexToSignedInt(hexVal) {
+	def unsignedVal = hexToInt(hexVal)
+	unsignedVal > 32767 ? unsignedVal - 65536 : unsignedVal
+}
+
 def garageEvent(zValue) {
 	def absValue = zValue.abs()
 	def contactValue = null

smartapps/smartthings/ecobee-connect.src/ecobee-connect.groovy

@@ -61,7 +61,7 @@ def authPage() {
 		description = "Click to enter Ecobee Credentials"
 	}
 
-	def redirectUrl = buildRedirectUrl //"${serverUrl}/oauth/initialize?appId=${app.id}&access_token=${atomicState.accessToken}"
+	def redirectUrl = buildRedirectUrl
 	log.debug "RedirectUrl = ${redirectUrl}"
 	// get rid of next button until the user is actually auth'd
 	if (!oauthTokenProvided) {
@@ -103,7 +103,7 @@ def oauthInitUrl() {
 			scope: "smartRead,smartWrite",
 			client_id: smartThingsClientId,
 			state: atomicState.oauthInitState,
-			redirect_uri: callbackUrl //"https://graph.api.smartthings.com/oauth/callback"
+			redirect_uri: callbackUrl
 	]
 
 	redirect(location: "${apiEndpoint}/authorize?${toQueryString(oauthParams)}")
@@ -115,14 +115,13 @@ def callback() {
 	def code = params.code
 	def oauthState = params.state
 
-	//verify oauthState == atomicState.oauthInitState, so the callback corresponds to the authentication request
 	if (oauthState == atomicState.oauthInitState){
 
 		def tokenParams = [
 				grant_type: "authorization_code",
 				code      : code,
 				client_id : smartThingsClientId,
-				redirect_uri: callbackUrl //"https://graph.api.smartthings.com/oauth/callback"
+				redirect_uri: callbackUrl
 		]
 
 		def tokenUrl = "https://www.ecobee.com/home/token?${toQueryString(tokenParams)}"
@@ -259,7 +258,7 @@ def getEcobeeThermostats() {
 			} else {
 				log.debug "http status: ${resp.status}"
 				//refresh the auth token
-                if (resp.status == 500 && resp.data.status.code == 14) {
+				if (resp.data.status.code == 14) {
 					log.debug "Storing the failed action to try later"
 					atomicState.action = "getEcobeeThermostats"
 					log.debug "Refreshing your auth_token!"
@@ -317,7 +316,7 @@ def initialize() {
 	def devices = thermostats.collect { dni ->
 		def d = getChildDevice(dni)
 		if(!d) {
-			d = addChildDevice(app.namespace, getChildName(), dni, null, ["label":"Ecobee Thermostat:${atomicState.thermostats[dni]}"])
+			d = addChildDevice(app.namespace, getChildName(), dni, null, ["label":"${atomicState.thermostats[dni]}" ?: "Ecobee Thermostat"])
 			log.debug "created ${d.displayName} with id $dni"
 		} else {
 			log.debug "found ${d.displayName} with id $dni already exists"
@@ -328,7 +327,7 @@ def initialize() {
 	def sensors = ecobeesensors.collect { dni ->
 		def d = getChildDevice(dni)
 		if(!d) {
-			d = addChildDevice(app.namespace, getSensorChildName(), dni, null, ["label":"Ecobee Sensor:${atomicState.sensors[dni]}"])
+			d = addChildDevice(app.namespace, getSensorChildName(), dni, null, ["label":"${atomicState.sensors[dni]}" ?:"Ecobee Sensor"])
 			log.debug "created ${d.displayName} with id $dni"
 		} else {
 			log.debug "found ${d.displayName} with id $dni already exists"
@@ -357,18 +356,14 @@ def initialize() {
 	//send activity feeds to tell that device is connected
 	def notificationMessage = "is connected to SmartThings"
 	sendActivityFeeds(notificationMessage)
-    state.timeSendPush = null
+	atomicState.timeSendPush = null
+	atomicState.reAttempt = 0
 
 	pollHandler() //first time polling data data from thermostat
 
 	//automatically update devices status every 5 mins
 	runEvery5Minutes("poll")
 
-    //since access_token expires every 2 hours
-    runEvery1Hour("refreshAuthToken")
-
-	atomicState.reAttempt = 0
-
 }
 
 def pollHandler() {
@@ -389,18 +384,10 @@ def pollHandler() {
 def pollChildren(child = null) {
 	def thermostatIdsString = getChildDeviceIdsString()
 	log.debug "polling children: $thermostatIdsString"
+	def data = ""
 
 	def jsonRequestBody = '{"selection":{"selectionType":"thermostats","selectionMatch":"' + thermostatIdsString + '","includeExtendedRuntime":"true","includeSettings":"true","includeRuntime":"true","includeSensors":true}}'
 	def result = false
-	// // TODO: test this:
-	//
-	// def jsonRequestBody = toJson([
-	//	selection:[
-	//		selectionType: "thermostats",
-	//		   selectionMatch: getChildDeviceIdsString(),
-	//		   includeRuntime: true
-	//	   ]
-	// ])
 
 	def pollParams = [
 			uri: apiEndpoint,
@@ -411,11 +398,6 @@ def pollChildren(child = null) {
 
 	try{
 		httpGet(pollParams) { resp ->
-
-//            if (resp.data) {
-//                debugEventFromParent(child, "pollChildren(child) >> resp.status = ${resp.status}, resp.data = ${resp.data}")
-//            }
-
 			if(resp.status == 200) {
 				log.debug "poll results returned resp.data ${resp.data}"
 				atomicState.remoteSensors = resp.data.thermostatList.remoteSensors
@@ -426,20 +408,41 @@ def pollChildren(child = null) {
 
 					log.debug "updating dni $dni"
 
-					def data = [
+					data = [
 							coolMode: (stat.settings.coolStages > 0),
 							heatMode: (stat.settings.heatStages > 0),
+							deviceTemperatureUnit: stat.settings.useCelsius,
+							minHeatingSetpoint: (stat.settings.heatRangeLow / 10),
+							maxHeatingSetpoint: (stat.settings.heatRangeHigh / 10),
+							minCoolingSetpoint: (stat.settings.coolRangeLow / 10),
+							maxCoolingSetpoint: (stat.settings.coolRangeHigh / 10),
 							autoMode: stat.settings.autoHeatCoolFeatureEnabled,
 							auxHeatMode: (stat.settings.hasHeatPump) && (stat.settings.hasForcedAir || stat.settings.hasElectric || stat.settings.hasBoiler),
-							temperature: stat.runtime.actualTemperature / 10,
+							temperature: (stat.runtime.actualTemperature / 10),
 							heatingSetpoint: stat.runtime.desiredHeat / 10,
 							coolingSetpoint: stat.runtime.desiredCool / 10,
-							thermostatMode: stat.settings.hvacMode
+							thermostatMode: stat.settings.hvacMode,
+							humidity: stat.runtime.actualHumidity
 					]
-					data["temperature"] = data["temperature"] ? data["temperature"].toDouble().toInteger() : data["temperature"]
+
-					data["heatingSetpoint"] = data["heatingSetpoint"] ? data["heatingSetpoint"].toDouble().toInteger() : data["heatingSetpoint"]
+					if (location.temperatureScale == "F")
-					data["coolingSetpoint"] = data["coolingSetpoint"] ? data["coolingSetpoint"].toDouble().toInteger() : data["coolingSetpoint"]
+					{
-//                    debugEventFromParent(child, "Event Data = ${data}")
+						data["temperature"] = data["temperature"] ? Math.round(data["temperature"].toDouble()) : data["temperature"]
+						data["heatingSetpoint"] = data["heatingSetpoint"] ? Math.round(data["heatingSetpoint"].toDouble()) : data["heatingSetpoint"]
+						data["coolingSetpoint"] = data["coolingSetpoint"] ? Math.round(data["coolingSetpoint"].toDouble()) : data["coolingSetpoint"]
+						data["minHeatingSetpoint"] = data["minHeatingSetpoint"] ? Math.round(data["minHeatingSetpoint"].toDouble()) : data["minHeatingSetpoint"]
+						data["maxHeatingSetpoint"] = data["maxHeatingSetpoint"] ? Math.round(data["maxHeatingSetpoint"].toDouble()) : data["maxHeatingSetpoint"]
+						data["minCoolingSetpoint"] = data["minCoolingSetpoint"] ? Math.round(data["minCoolingSetpoint"].toDouble()) : data["minCoolingSetpoint"]
+						data["maxCoolingSetpoint"] = data["maxCoolingSetpoint"] ? Math.round(data["maxCoolingSetpoint"].toDouble()) : data["maxCoolingSetpoint"]
+
+					}
+
+					if (data?.deviceTemperatureUnit == false && location.temperatureScale == "F") {
+						data["deviceTemperatureUnit"] = "F"
+
+					} else {
+						data["deviceTemperatureUnit"] = "C"
+					}
 
 					collector[dni] = [data:data]
 					return collector
@@ -450,9 +453,8 @@ def pollChildren(child = null) {
 				log.error "polling children & got http status ${resp.status}"
 
 				//refresh the auth token
-				if (resp.status == 500 && resp.data.status.code == 14) {
+				if (resp.data.status.code == 14) {
-					log.debug "Storing the failed action to try later"
+					atomicState.action = "pollChildren"
-					atomicState.action = "pollChildren";
 					log.debug "Refreshing your auth_token!"
 					refreshAuthToken()
 				}
@@ -463,7 +465,6 @@ def pollChildren(child = null) {
 		}
 	} catch(Exception e) {
 		log.debug "___exception polling children: " + e
-//        debugEventFromParent(child, "___exception polling children: " + e)
 		refreshAuthToken()
 	}
 	return result
@@ -476,18 +477,14 @@ def pollChild(child){
 		if (!child.device.deviceNetworkId.startsWith("ecobee_sensor")){
 			if(atomicState.thermostats[child.device.deviceNetworkId] != null) {
 				def tData = atomicState.thermostats[child.device.deviceNetworkId]
-//                debugEventFromParent(child, "pollChild(child)>> data for ${child.device.deviceNetworkId} : ${tData.data}") //TODO comment
 				log.info "pollChild(child)>> data for ${child.device.deviceNetworkId} : ${tData.data}"
 				child.generateEvent(tData.data) //parse received message from parent
-//            return tData.data
 			} else if(atomicState.thermostats[child.device.deviceNetworkId] == null) {
-//                debugEventFromParent(child, "ERROR: Device connection removed? no data for ${child.device.deviceNetworkId} after polling") //TODO comment
 				log.error "ERROR: Device connection removed? no data for ${child.device.deviceNetworkId}"
 				return null
 			}
 		}
 	} else {
-//        debugEventFromParent(child, "ERROR: pollChildren(child) for ${child.device.deviceNetworkId} after polling") //TODO comment
 		log.info "ERROR: pollChildren(child) for ${child.device.deviceNetworkId} after polling"
 		return null
 	}
@@ -513,9 +510,6 @@ def availableModes(child) {
 	{
 		log.error "ERROR: Device connection removed? no data for ${child.device.deviceNetworkId} after polling"
 
-		// TODO: flag device as in error state
-		// child.errorState = true
-
 		return null
 	}
 
@@ -542,8 +536,6 @@ def currentMode(child) {
 	if(!tData) {
 		log.error "ERROR: Device connection removed? no data for ${child.device.deviceNetworkId} after polling"
 
-		// TODO: flag device as in error state
-		// child.errorState = true
 
 		return null
 	}
@@ -561,8 +553,12 @@ def updateSensorData() {
 				def occupancy = ""
 				it.capability.each {
 					if (it.type == "temperature") {
-						temperature = it.value as Double
+						if (location.temperatureScale == "F") {
-						temperature = (temperature / 10).toInteger()
+							temperature = Math.round(it.value.toDouble() / 10)
+						} else {
+							temperature = convertFtoC(it.value.toDouble() / 10)
+						}
+
 					} else if (it.type == "occupancy") {
 						if(it.value == "true")
 							occupancy = "active"
@@ -575,7 +571,6 @@ def updateSensorData() {
 				if(d) {
 					d.sendEvent(name:"temperature", value: temperature)
 					d.sendEvent(name:"motion", value: occupancy)
-//                    debugEventFromParent(d, "temperature : ${temperature}, motion:${occupancy}")
 				}
 			}
 		}
@@ -641,7 +636,6 @@ private refreshAuthToken() {
 
 							"${atomicState.action}"()
 
-                            //remove saved action
 							atomicState.action = ""
 						}
 
@@ -651,7 +645,7 @@ private refreshAuthToken() {
 					log.debug "refresh failed ${resp.status} : ${resp.status.code}"
 				}
 			}
-        } catch(Exception e) {
+		} catch (groovyx.net.http.HttpResponseException e) {
 			log.error "refreshAuthToken() >> Error: e.statusCode ${e.statusCode}"
 			def reAttemptPeriod = 300 // in sec
 			if (e.statusCode != 401) { //this issue might comes from exceed 20sec app execution, connectivity issue etc.
@@ -672,13 +666,9 @@ private refreshAuthToken() {
 
 def resumeProgram(child, deviceId) {
 
-//    def thermostatIdsString = getChildDeviceIdsString()
-//    log.debug "resumeProgram children: $thermostatIdsString"
 
 	def jsonRequestBody = '{"selection":{"selectionType":"thermostats","selectionMatch":"' + deviceId + '","includeRuntime":true},"functions": [{"type": "resumeProgram"}]}'
-	//, { "type": "sendMessage", "params": { "text": "Setpoint Updated" } }
 	def result = sendJson(jsonRequestBody)
-//    debugEventFromParent(child, "resumeProgram(child) with result ${result}")
 	return result
 }
 
@@ -687,27 +677,16 @@ def setHold(child, heating, cooling, deviceId, sendHoldType) {
 	int h = heating * 10
 	int c = cooling * 10
 
-//    log.debug "setpoints____________ - h: $heating - $h, c: $cooling - $c"
-//    def thermostatIdsString = getChildDeviceIdsString()
 
 	def jsonRequestBody = '{"selection":{"selectionType":"thermostats","selectionMatch":"' + deviceId + '","includeRuntime":true},"functions": [{ "type": "setHold", "params": { "coolHoldTemp": '+c+',"heatHoldTemp": '+h+', "holdType": '+sendHoldType+' } } ]}'
-//	def jsonRequestBody = '{"selection":{"selectionType":"thermostats","selectionMatch":"' + thermostatIdsString + '","includeRuntime":true},"functions": [{"type": "resumeProgram"}, { "type": "setHold", "params": { "coolHoldTemp": '+c+',"heatHoldTemp": '+h+', "holdType": "indefinite" } } ]}'
 	def result = sendJson(child, jsonRequestBody)
-//    debugEventFromParent(child, "setHold: heating: ${h}, cooling: ${c} with result ${result}")
 	return result
 }
 
 def setMode(child, mode, deviceId) {
-//    def thermostatIdsString = getChildDeviceIdsString()
-//    log.debug "setCoolingSetpoint children: $thermostatIdsString"
-
 	def jsonRequestBody = '{"selection":{"selectionType":"thermostats","selectionMatch":"' + deviceId + '","includeRuntime":true},"thermostat": {"settings":{"hvacMode":"'+"${mode}"+'"}}}'
 
-//    log.debug "Mode Request Body = ${jsonRequestBody}"
-//    debugEvent ("Mode Request Body = ${jsonRequestBody}")
-
 	def result = sendJson(jsonRequestBody)
-//    debugEventFromParent(child, "setMode to ${mode} with result ${result}")
 	return result
 }
 
@@ -724,8 +703,6 @@ def sendJson(child = null, String jsonBody) {
 	try{
 		httpPost(cmdParams) { resp ->
 
-//            debugEventFromParent(child, "sendJson >> resp.status ${resp.status}, resp.data: ${resp.data}")
-
 			if(resp.status == 200) {
 
 				log.debug "updated ${resp.data}"
@@ -741,8 +718,7 @@ def sendJson(child = null, String jsonBody) {
 				debugEvent ("sent Json & got http status ${resp.status} - ${resp.status.code}")
 
 				//refresh the auth token
-				if (resp.status == 500 && resp.status.code == 14) {
+				if (resp.status.code == 14) {
-					//log.debug "Storing the failed action to try later"
 					log.debug "Refreshing your auth_token!"
 					debugEvent ("Refreshing OAUTH Token")
 					refreshAuthToken()
@@ -816,3 +792,15 @@ def sendActivityFeeds(notificationMessage) {
 		child.generateActivityFeedsEvent(notificationMessage) //parse received message from parent
 	}
 }
+
+def roundC (tempC) {
+	return String.format("%.1f", (Math.round(tempC * 2))/2)
+}
+
+def convertFtoC (tempF) {
+	return String.format("%.1f", (Math.round(((tempF - 32)*(5/9)) * 2))/2)
+}
+
+def convertCtoF (tempC) {
+	return (Math.round(tempC * (9/5)) + 32).toInteger()
+}

smartapps/smartthings/gentle-wake-up.src/gentle-wake-up.groovy

@@ -201,8 +201,8 @@ def completionPage() {
 
 		section("Switches") {
 			input(name: "completionSwitches", type: "capability.switch", title: "Set these switches", description: null, required: false, multiple: true, submitOnChange: true)
-			if (completionSwitches || androidClient()) {
+			if (completionSwitches) {
-				input(name: "completionSwitchesState", type: "enum", title: "To", description: null, required: false, multiple: false, options: ["on", "off"], style: "segmented", defaultValue: "on")
+				input(name: "completionSwitchesState", type: "enum", title: "To", description: null, required: false, multiple: false, options: ["on", "off"], defaultValue: "on")
 				input(name: "completionSwitchesLevel", type: "number", title: "Optionally, Set Dimmer Levels To", description: null, required: false, multiple: false, range: "(0..99)")
 			}
 		}

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -35,24 +35,12 @@ preferences {
 }
 
 def mainPage() {
-	if(canInstallLabs()) {
 	def bridges = bridgesDiscovered()
 	if (state.username && bridges) {
 		return bulbDiscovery()
 	} else {
 		return bridgeDiscovery()
 	}
-	} else {
-		def upgradeNeeded = """To use SmartThings Labs, your Hub should be completely up to date.
-
-To update your Hub, access Location Settings in the Main Menu (tap the gear next to your location name), select your Hub, and choose "Update Hub"."""
-
-		return dynamicPage(name:"bridgeDiscovery", title:"Upgrade needed!", nextPage:"", install:false, uninstall: true) {
-			section("Upgrade") {
-				paragraph "$upgradeNeeded"
-			}
-		}
-	}
 }
 
 def bridgeDiscovery(params=[:])
@@ -326,6 +314,7 @@ def addBulbs() {
                         d = addChildDevice("smartthings", "Hue Bulb", dni, newHueBulb?.value.hub, ["label":newHueBulb?.value.name])
                     }
                     log.debug "created ${d.displayName} with id $dni"
+                    d.refresh()
                 } else {
                 	log.debug "$dni in not longer paired to the Hue Bridge or ID changed"
                 }
@@ -333,8 +322,8 @@ def addBulbs() {
             	//backwards compatable
 				newHueBulb = bulbs.find { (app.id + "/" + it.id) == dni }
 				d = addChildDevice("smartthings", "Hue Bulb", dni, newHueBulb?.hub, ["label":newHueBulb?.name])
-			}
                 d.refresh()
+			}
 		} else {
 			log.debug "found ${d.displayName} with id $dni already exists, type: '$d.typeName'"
 			if (bulbs instanceof java.util.Map) {
@@ -764,10 +753,6 @@ private String convertHexToIP(hex) {
 	[convertHexToInt(hex[0..1]),convertHexToInt(hex[2..3]),convertHexToInt(hex[4..5]),convertHexToInt(hex[6..7])].join(".")
 }
 
-private Boolean canInstallLabs() {
-	return hasAllHubsOver("000.011.00603")
-}
-
 private Boolean hasAllHubsOver(String desiredFirmware) {
 	return realHubFirmwareVersions.every { fw -> fw >= desiredFirmware }
 }

smartapps/smartthings/logitech-harmony-connect.src/logitech-harmony-connect.groovy

@@ -419,9 +419,11 @@ def addDevice() {
         def d = getChildDevice(dni)
         if(!d) {
             def newAction = state.HarmonyActivities.find { it.key == dni }
+            if (newAction) {
 	            d = addChildDevice("smartthings", "Harmony Activity", dni, null, [label:"${newAction.value} [Harmony Activity]"])
 	            log.trace "created ${d.displayName} with id $dni"
 	            poll()
+            }
         } else {
             log.trace "found ${d.displayName} with id $dni already exists"
         }

smartapps/smartthings/notify-me-when.src/i18n/messages.properties

@@ -0,0 +1,31 @@
+'''Acceleration Detected'''.ko=가속화 감지됨
+'''Arrival Of'''.ko=도착
+'''Both Push and SMS?'''.ko=푸시 메시지와 SMS를 모두 사용하시겠습니까?
+'''Button Pushed'''.ko=버튼이 눌렸습니다
+'''Contact Closes'''.ko=접점 닫힘
+'''Contact Opens'''.ko=접점 열림
+'''Departure Of'''.ko=출발
+'''Message Text'''.ko=문자 메시지
+'''Minutes'''.ko=분
+'''Motion Here'''.ko=동작
+'''Phone Number (for SMS, optional)'''.ko=휴대전화 번호(문자 메시지 - 옵션)
+'''Receive notifications when anything happens in your home.'''.ko=집 안에 무슨 일이 일어나면 알림이 전송됩니다.
+'''Smoke Detected'''.ko=연기가 감지되었습니다
+'''Switch Turned Off'''.ko=스위치 꺼짐
+'''Switch Turned On'''.ko=스위치 꺼짐
+'''Choose one or more, when...'''.ko=다음의 경우 하나 이상 선택
+'''Yes'''.ko=예
+'''No'''.ko=아니요
+'''Send this message (optional, sends standard status message if not specified)'''.ko=이 메시지 전송(선택적, 지정되지 않은 경우 표준 상태 메시지를 보냅니다)
+'''Via a push notification and/or an SMS message'''.ko=푸시 알림 및/또는 문자 메시지를 통해
+'''Set for specific mode(s)'''.ko=특정 모드 설정
+'''Tap to set'''.ko=눌러서 설정
+'''Minimum time between messages (optional, defaults to every message)'''.ko=메시지작 간 최소 시간(선택 사항, 모든 메시지의 기본 설정)
+'''If outside the US please make sure to enter the proper country code'''.ko=미국 이외 거주자는 적절한 국가 코드를 입력했는지 확인하십시오
+'''Water Sensor Wet'''.ko=Water Sensor에서 물이 감지되었습니다
+'''{{ triggerEvent.linkText }} has arrived at the {{ location.name }}'''.ko={{ triggerEvent.linkText }}님이 {{ location.name }}에 도착했습니다
+'''{{ triggerEvent.linkText }} has arrived at {{ location.name }}'''.ko={{ triggerEvent.linkText }}님이 {{ location.name }}에 도착했습니다
+'''{{ triggerEvent.linkText }} has left the {{ location.name }}'''.ko={{ triggerEvent.linkText }}님이 {{ location.name }}을(를) 떠났습니다
+'''{{ triggerEvent.linkText }} has left {{ location.name }}'''.ko={{ triggerEvent.linkText }}님이 {{ location.name }}을(를) 떠났습니다
+'''Assign a name'''.ko=이름 배정
+'''Choose Modes'''.ko=모드 선택

smartapps/smartthings/notify-me-when.src/notify-me-when.groovy

@@ -99,49 +99,55 @@ def eventHandler(evt) {
 }
 
 private sendMessage(evt) {
-	def msg = messageText ?: defaultText(evt)
+	String msg = messageText
+	Map options = [:]
+
+	if (!messageText) {
+		msg = defaultText(evt)
+		options = [translatable: true, triggerEvent: evt]
+	}
 	log.debug "$evt.name:$evt.value, pushAndPhone:$pushAndPhone, '$msg'"
 
 	if (location.contactBookEnabled) {
-        sendNotificationToContacts(msg, recipients)
+		sendNotificationToContacts(msg, recipients, options)
-    }
+	} else {
-    else {
+		if (!phone || pushAndPhone != 'No') {
-
+			log.debug 'sending push'
-        if (!phone || pushAndPhone != "No") {
+			options.method = 'push'
-            log.debug "sending push"
+			//sendPush(msg)
-            sendPush(msg)
 		}
 		if (phone) {
-            log.debug "sending SMS"
+			options.phone = phone
-            sendSms(phone, msg)
+			log.debug 'sending SMS'
+			//sendSms(phone, msg)
 		}
+		sendNotification(msg, options)
 	}
+
 	if (frequency) {
 		state[evt.deviceId] = now()
 	}
 }
 
 private defaultText(evt) {
-	if (evt.name == "presence") {
+	if (evt.name == 'presence') {
-		if (evt.value == "present") {
+		if (evt.value == 'present') {
 			if (includeArticle) {
-				"$evt.linkText has arrived at the $location.name"
+				'{{ triggerEvent.linkText }} has arrived at the {{ location.name }}'
 			}
 			else {
-				"$evt.linkText has arrived at $location.name"
+				'{{ triggerEvent.linkText }} has arrived at {{ location.name }}'
 			}
-		}
+		} else {
-		else {
 			if (includeArticle) {
-				"$evt.linkText has left the $location.name"
+				'{{ triggerEvent.linkText }} has left the {{ location.name }}'
 			}
 			else {
-				"$evt.linkText has left $location.name"
+				'{{ triggerEvent.linkText }} has left {{ location.name }}'
 			}
 		}
-	}
+	} else {
-	else {
+		'{{ triggerEvent.descriptionText }}'
-		evt.descriptionText
 	}
 }