MSA-884: This is a quick update to a previously published device handler to accept the "update" packet that occurs when the zigbee pairs with the hub to stop an exception due to it not being in the map format that other packets are in.

Rolling up changes to staging from master

devicetypes/smartthings/ecobee-thermostat.src/ecobee-thermostat.groovy

@@ -30,7 +30,6 @@ metadata {
 		command "lowerSetpoint"
 		command "resumeProgram"
 		command "switchMode"
-		command "switchFanMode"
 
 		attribute "thermostatSetpoint","number"
 		attribute "thermostatStatus","string"
@@ -64,9 +63,10 @@ metadata {
 			state "updating", label:"Working", icon: "st.secondary.secondary"
 		}
 		standardTile("fanMode", "device.thermostatFanMode", inactiveLabel: false, decoration: "flat") {
-			state "auto", action:"switchFanMode", nextState: "updating", icon: "st.thermostat.fan-auto"
+			state "auto", label:'Fan: ${currentValue}', action:"switchFanMode", nextState: "on"
-			state "on", action:"switchFanMode", nextState: "updating", icon: "st.thermostat.fan-on"
+			state "on", label:'Fan: ${currentValue}', action:"switchFanMode", nextState: "off"
-			state "updating", label:"Working", icon: "st.secondary.secondary"
+			state "off", label:'Fan: ${currentValue}', action:"switchFanMode", nextState: "circulate"
+			state "circulate", label:'Fan: ${currentValue}', action:"switchFanMode", nextState: "auto"
 		}
 		standardTile("upButtonControl", "device.thermostatSetpoint", inactiveLabel: false, decoration: "flat") {
 			state "setpoint", action:"raiseSetpoint", icon:"st.thermostat.thermostat-up"
@@ -96,14 +96,14 @@ metadata {
 			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
 		standardTile("resumeProgram", "device.resumeProgram", inactiveLabel: false, decoration: "flat") {
-			state "resume", action:"resumeProgram", nextState: "updating", label:'Resume', icon:"st.samsung.da.oven_ic_send"
+			state "resume", action:"resumeProgram", nextState: "updating", label:'Resume Schedule', icon:"st.samsung.da.oven_ic_send"
 			state "updating", label:"Working", icon: "st.secondary.secondary"
 		}
 		valueTile("humidity", "device.humidity", decoration: "flat") {
-			state "humidity", label:'${currentValue}%'
+			state "humidity", label:'${currentValue}% humidity'
 		}
 		main "temperature"
-		details(["temperature", "upButtonControl", "thermostatSetpoint", "currentStatus", "downButtonControl", "mode", "fanMode","resumeProgram", "humidity", "refresh"])
+		details(["temperature", "upButtonControl", "thermostatSetpoint", "currentStatus", "downButtonControl", "mode", "resumeProgram", "refresh", "humidity"])
 	}
 
 	preferences {
@@ -154,9 +154,6 @@ def generateEvent(Map results) {
 			}  else if (name=="heatMode" || name=="coolMode" || name=="autoMode" || name=="auxHeatMode"){
 				isChange = isStateChange(device, name, value.toString())
 				event << [value: value.toString(), isStateChange: isChange, displayed: false]
-			}  else if (name=="thermostatFanMode"){
-				isChange = isStateChange(device, name, value.toString())
-				event << [value: value.toString(), isStateChange: isChange, displayed: false]
 			}  else if (name=="humidity") {
 				isChange = isStateChange(device, name, value.toString())
 				event << [value: value.toString(), isStateChange: isChange, displayed: false, unit: "%"]
@@ -306,7 +303,7 @@ def modes() {
 }
 
 def fanModes() {
-	["on", "auto"]
+	["off", "on", "auto", "circulate"]
 }
 
 def switchMode() {
@@ -335,15 +332,17 @@ def switchFanMode() {
 	def returnCommand
 
 	switch (currentFanMode) {
-		case "on":
+		case "fanAuto":
-			returnCommand = switchToFanMode("auto")
+			returnCommand = switchToFanMode("fanOn")
 			break
-		case "auto":
+		case "fanOn":
-			returnCommand = switchToFanMode("on")
+			returnCommand = switchToFanMode("fanCirculate")
+			break
+		case "fanCirculate":
+			returnCommand = switchToFanMode("fanAuto")
 			break
-
 	}
-	if(!currentFanMode) { returnCommand = switchToFanMode("auto") }
+	if(!currentFanMode) { returnCommand = switchToFanMode("fanOn") }
 	returnCommand
 }
 
@@ -352,20 +351,25 @@ def switchToFanMode(nextMode) {
 	log.debug "switching to fan mode: $nextMode"
 	def returnCommand
 
-	if(nextMode == "auto") {
+	if(nextMode == "fanAuto") {
-		if(!fanModes.contains("auto")) {
+		if(!fanModes.contains("fanAuto")) {
 			returnCommand = fanAuto()
 		} else {
-			returnCommand = switchToFanMode("on")
+			returnCommand = switchToFanMode("fanOn")
 		}
-	} else if(nextMode == "on") {
+	} else if(nextMode == "fanOn") {
-		if(!fanModes.contains("on")) {
+		if(!fanModes.contains("fanOn")) {
 			returnCommand = fanOn()
 		} else {
-			returnCommand = switchToFanMode("auto")
+			returnCommand = switchToFanMode("fanCirculate")
+		}
+	} else if(nextMode == "fanCirculate") {
+		if(!fanModes.contains("fanCirculate")) {
+			returnCommand = fanCirculate()
+		} else {
+			returnCommand = switchToFanMode("fanAuto")
 		}
 	}
-
 	returnCommand
 }
 
@@ -375,10 +379,13 @@ def getDataByName(String name) {
 
 def setThermostatMode(String value) {
 	log.debug "setThermostatMode({$value})"
+
 }
 
 def setThermostatFanMode(String value) {
+
 	log.debug "setThermostatFanMode({$value})"
+
 }
 
 def generateModeEvent(mode) {
@@ -465,48 +472,23 @@ def auto() {
 
 def fanOn() {
 	log.debug "fanOn"
-	String fanMode = "on"
+//    parent.setFanMode (this,"on")
-	def heatingSetpoint = device.currentValue("heatingSetpoint")
-	def coolingSetpoint = device.currentValue("coolingSetpoint")
-	def deviceId = device.deviceNetworkId.split(/\./).last()
-
-	def sendHoldType = holdType ? (holdType=="Temporary")? "nextTransition" : (holdType=="Permanent")? "indefinite" : "indefinite" : "indefinite"
-
-	def coolingValue = location.temperatureScale == "C"? convertCtoF(coolingSetpoint) : coolingSetpoint
-	def heatingValue = location.temperatureScale == "C"? convertCtoF(heatingSetpoint) : heatingSetpoint
-
-	if (parent.setFanMode(this, heatingValue, coolingValue, deviceId, sendHoldType, fanMode)) {
-		generateFanModeEvent(fanMode)
-	} else {
-		log.debug "Error setting new mode."
-		def currentFanMode = device.currentState("thermostatFanMode")?.value
-		generateModeEvent(currentFanMode) // reset the tile back
-	}
 }
 
 def fanAuto() {
 	log.debug "fanAuto"
-	String fanMode = "auto"
+//    parent.setFanMode (this,"auto")
-	def heatingSetpoint = device.currentValue("heatingSetpoint")
-	def coolingSetpoint = device.currentValue("coolingSetpoint")
-	def deviceId = device.deviceNetworkId.split(/\./).last()
-
-	def sendHoldType = holdType ? (holdType=="Temporary")? "nextTransition" : (holdType=="Permanent")? "indefinite" : "indefinite" : "indefinite"
-
-	def coolingValue = location.temperatureScale == "C"? convertCtoF(coolingSetpoint) : coolingSetpoint
-	def heatingValue = location.temperatureScale == "C"? convertCtoF(heatingSetpoint) : heatingSetpoint
-
-	if (parent.setFanMode(this, heatingValue, coolingValue, deviceId, sendHoldType, fanMode)) {
-		generateFanModeEvent(fanMode)
-	} else {
-		log.debug "Error setting new mode."
-		def currentFanMode = device.currentState("thermostatFanMode")?.value
-		generateModeEvent(currentFanMode) // reset the tile back
-	}
 }
 
+def fanCirculate() {
+	log.debug "fanCirculate"
+//    parent.setFanMode (this,"circulate")
+}
 
-
+def fanOff() {
+	log.debug "fanOff"
+//    parent.setFanMode (this,"off")
+}
 
 def generateSetpointEvent() {
 

smartapps/smartthings/ecobee-connect.src/ecobee-connect.groovy

@@ -422,8 +422,7 @@ def pollChildren(child = null) {
 							heatingSetpoint: stat.runtime.desiredHeat / 10,
 							coolingSetpoint: stat.runtime.desiredCool / 10,
 							thermostatMode: stat.settings.hvacMode,
-							humidity: stat.runtime.actualHumidity,
+							humidity: stat.runtime.actualHumidity
-							thermostatFanMode: stat.runtime.desiredFanMode
 					]
 
 					if (location.temperatureScale == "F")
@@ -677,19 +676,9 @@ def setHold(child, heating, cooling, deviceId, sendHoldType) {
 
 	int h = heating * 10
 	int c = cooling * 10
+
+
 	def jsonRequestBody = '{"selection":{"selectionType":"thermostats","selectionMatch":"' + deviceId + '","includeRuntime":true},"functions": [{ "type": "setHold", "params": { "coolHoldTemp": '+c+',"heatHoldTemp": '+h+', "holdType": '+sendHoldType+' } } ]}'
-
-	def result = sendJson(child, jsonRequestBody)
-	return result
-}
-
-def setFanMode(child, heating, cooling, deviceId, sendHoldType, fanMode) {
-
-	int h = heating * 10
-	int c = cooling * 10
-
-
-	def jsonRequestBody = '{"selection":{"selectionType":"thermostats","selectionMatch":"' + deviceId + '","includeRuntime":true},"functions": [{ "type": "setHold", "params": { "coolHoldTemp": '+c+',"heatHoldTemp": '+h+', "holdType": '+sendHoldType+', "fan": '+fanMode+' } } ]}'
 	def result = sendJson(child, jsonRequestBody)
 	return result
 }