MSA-884: This is a quick update to a previously published device handler to accept the "update" packet that occurs when the zigbee pairs with the hub to stop an exception due to it not being in the map format that other packets are in.

devicetypes/osotech/plantlink.src/plantlink.groovy

@@ -120,7 +120,7 @@ def setInstallSmartApp(value){
 }
 
 def parse(String description) {
-
+	log.debug description
 	def description_map = parseDescriptionAsMap(description)
     def event_name = ""
     def measurement_map = [
@@ -129,10 +129,7 @@ def parse(String description) {
             zigbeedeviceid: device.zigbeeId,
             created: new Date().time /1000 as int
     ]
-    if (description_map.cluster == "0000"){
+    if (description_map.cluster == "0001"){
-    	/* version number, not used */
-        
-    } else if (description_map.cluster == "0001"){
         /* battery voltage in mV (device needs minimium 2.1v to run) */
         log.debug "PlantLink - id ${device.zigbeeId} battery ${description_map.value}"
         event_name = "battery_status"
@@ -158,6 +155,10 @@ def parse(String description) {
 def parseDescriptionAsMap(description) {
     (description - "read attr - ").split(",").inject([:]) { map, param ->
         def nameAndValue = param.split(":")
+        if(nameAndValue.length == 2){
 	        map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
+        }else{
+        	map += []
+        }
     }
 }

devicetypes/smartthings/ecobee-thermostat.src/ecobee-thermostat.groovy

@@ -204,11 +204,11 @@ private getThermostatDescriptionText(name, value, linkText) {
 
 void setHeatingSetpoint(setpoint) {
 	log.debug "***heating setpoint $setpoint"
-	def heatingSetpoint = setpoint
+	def heatingSetpoint = setpoint.toDouble()
-	def coolingSetpoint = device.currentValue("coolingSetpoint")
+	def coolingSetpoint = device.currentValue("coolingSetpoint").toDouble()
 	def deviceId = device.deviceNetworkId.split(/\./).last()
-	def maxHeatingSetpoint = device.currentValue("maxHeatingSetpoint")
+	def maxHeatingSetpoint = device.currentValue("maxHeatingSetpoint").toDouble()
-	def minHeatingSetpoint = device.currentValue("minHeatingSetpoint")
+	def minHeatingSetpoint = device.currentValue("minHeatingSetpoint").toDouble()
 
 	//enforce limits of heatingSetpoint
 	if (heatingSetpoint > maxHeatingSetpoint) {
@@ -241,11 +241,11 @@ void setHeatingSetpoint(setpoint) {
 
 void setCoolingSetpoint(setpoint) {
 	log.debug "***cooling setpoint $setpoint"
-	def heatingSetpoint = device.currentValue("heatingSetpoint")
+	def heatingSetpoint = device.currentValue("heatingSetpoint").toDouble()
-	def coolingSetpoint = setpoint
+	def coolingSetpoint = setpoint.toDouble()
 	def deviceId = device.deviceNetworkId.split(/\./).last()
-	def maxCoolingSetpoint = device.currentValue("maxCoolingSetpoint")
+	def maxCoolingSetpoint = device.currentValue("maxCoolingSetpoint").toDouble()
-	def minCoolingSetpoint = device.currentValue("minCoolingSetpoint")
+	def minCoolingSetpoint = device.currentValue("minCoolingSetpoint").toDouble()
 
 
 	if (coolingSetpoint > maxCoolingSetpoint) {
@@ -505,6 +505,9 @@ def fanAuto() {
 	}
 }
 
+
+
+
 def generateSetpointEvent() {
 
 	log.debug "Generate SetPoint Event"
@@ -533,7 +536,6 @@ def generateSetpointEvent() {
 		coolingSetpoint = roundC(coolingSetpoint)
 	}
 
-
 	sendEvent("name":"maxHeatingSetpoint", "value":maxHeatingSetpoint, "unit":location.temperatureScale)
 	sendEvent("name":"maxCoolingSetpoint", "value":maxCoolingSetpoint, "unit":location.temperatureScale)
 	sendEvent("name":"minHeatingSetpoint", "value":minHeatingSetpoint, "unit":location.temperatureScale)

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -29,7 +29,6 @@ metadata {
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3305"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3325"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3326"
-		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3326-L", deviceJoinName: "Iris Motion Sensor"
 		fingerprint inClusters: "0000,0001,0003,000F,0020,0402,0500", outClusters: "0019", manufacturer: "SmartThings", model: "motionv4", deviceJoinName: "Motion Sensor"
 	}
 

devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy

@@ -27,7 +27,6 @@ metadata {
  
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3300-S"
         fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3300"
-		fingerprint inClusters: "0000,0001,0003,0020,0402,0500,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3320-L", deviceJoinName: "Iris Contact Sensor"
 	}
  
 	simulator {

devicetypes/smartthings/zigbee-switch-power.src/zigbee-switch-power.groovy

@@ -25,7 +25,6 @@ metadata {
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0702"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0702, 0B05", outClusters: "0003, 000A, 0019", manufacturer: "Jasco Products", model: "45853", deviceJoinName: "GE ZigBee Plug-In Switch"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0702, 0B05", outClusters: "000A, 0019", manufacturer: "Jasco Products", model: "45856", deviceJoinName: "GE ZigBee In-Wall Switch"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 000F, 0B04", outClusters: "0019", manufacturer: "SmartThings", model: "outletv4", deviceJoinName: "Outlet"
     }
 
     tiles(scale: 2) {

smartapps/smartthings/ecobee-connect.src/ecobee-connect.groovy

@@ -257,16 +257,21 @@ def getEcobeeThermostats() {
 				}
 			} else {
 				log.debug "http status: ${resp.status}"
-			}
+				//refresh the auth token
-		}
+				if (resp.data.status.code == 14) {
-	} catch (groovyx.net.http.HttpResponseException e) {
+					log.debug "Storing the failed action to try later"
-        log.trace "Exception polling children: " + e.response.data.status
-        if (e.response.data.status.code == 14) {
 					atomicState.action = "getEcobeeThermostats"
 					log.debug "Refreshing your auth_token!"
 					refreshAuthToken()
+				} else {
+					log.error "Authentication error, invalid authentication method, lack of credentials, etc."
 				}
 			}
+		}
+	} catch(Exception e) {
+		log.debug "___exception getEcobeeThermostats(): " + e
+		refreshAuthToken()
+	}
 	atomicState.thermostats = stats
 	return stats
 }
@@ -445,15 +450,23 @@ def pollChildren(child = null) {
 				}
 				result = true
 				log.debug "updated ${atomicState.thermostats?.size()} stats: ${atomicState.thermostats}"
-			}
+			} else {
-		}
+				log.error "polling children & got http status ${resp.status}"
-	} catch (groovyx.net.http.HttpResponseException e) {
+
-		log.trace "Exception polling children: " + e.response.data.status
+				//refresh the auth token
-        if (e.response.data.status.code == 14) {
+				if (resp.data.status.code == 14) {
 					atomicState.action = "pollChildren"
 					log.debug "Refreshing your auth_token!"
 					refreshAuthToken()
 				}
+				else {
+					log.error "Authentication error, invalid authentication method, lack of credentials, etc."
+				}
+			}
+		}
+	} catch(Exception e) {
+		log.debug "___exception polling children: " + e
+		refreshAuthToken()
 	}
 	return result
 }
@@ -629,6 +642,8 @@ private refreshAuthToken() {
 
 					}
 					atomicState.action = ""
+				} else {
+					log.debug "refresh failed ${resp.status} : ${resp.status.code}"
 				}
 			}
 		} catch (groovyx.net.http.HttpResponseException e) {
@@ -636,7 +651,7 @@ private refreshAuthToken() {
 			def reAttemptPeriod = 300 // in sec
 			if (e.statusCode != 401) { //this issue might comes from exceed 20sec app execution, connectivity issue etc.
 				runIn(reAttemptPeriod, "refreshAuthToken")
-			} else if (e.statusCode == 401) { // unauthorized
+			} else if (e.statusCode == 401) { //refresh token is expired
 				atomicState.reAttempt = atomicState.reAttempt + 1
 				log.warn "reAttempt refreshAuthToken to try = ${atomicState.reAttempt}"
 				if (atomicState.reAttempt <= 3) {
@@ -709,21 +724,29 @@ def sendJson(child = null, String jsonBody) {
 					log.debug "Error return code = ${resp.data.status.code}"
 					debugEvent("Error return code = ${resp.data.status.code}")
 				}
-			}
+			} else {
-		}
+				log.error "sent Json & got http status ${resp.status} - ${resp.status.code}"
-	} catch (groovyx.net.http.HttpResponseException e) {
+				debugEvent ("sent Json & got http status ${resp.status} - ${resp.status.code}")
-        log.trace "Exception Sending Json: " + e.response.data.status
+
-        debugEvent ("sent Json & got http status ${e.statusCode} - ${e.response.data.status.code}")
+				//refresh the auth token
-        if (e.response.data.status.code == 14) {
+				if (resp.status.code == 14) {
-            atomicState.action = "pollChildren"
 					log.debug "Refreshing your auth_token!"
+					debugEvent ("Refreshing OAUTH Token")
 					refreshAuthToken()
-        }
+					return false
-        else {
+				} else {
 					debugEvent ("Authentication error, invalid authentication method, lack of credentials, etc.")
 					log.error "Authentication error, invalid authentication method, lack of credentials, etc."
+					return false
 				}
 			}
+		}
+	} catch(Exception e) {
+		log.debug "Exception Sending Json: " + e
+		debugEvent ("Exception Sending JSON: " + e)
+		refreshAuthToken()
+		return false
+	}
 
 	if (returnStatus == 0)
 		return true