MSA-884: This is a quick update to a previously published device handler to accept the "update" packet that occurs when the zigbee pairs with the hub to stop an exception due to it not being in the map format that other packets are in.

Rolling up changes to staging from master

devicetypes/osotech/plantlink.src/plantlink.groovy

@@ -120,7 +120,7 @@ def setInstallSmartApp(value){
 }
 
 def parse(String description) {
-
+	log.debug description
 	def description_map = parseDescriptionAsMap(description)
     def event_name = ""
     def measurement_map = [
@@ -129,10 +129,7 @@ def parse(String description) {
             zigbeedeviceid: device.zigbeeId,
             created: new Date().time /1000 as int
     ]
-    if (description_map.cluster == "0000"){
+    if (description_map.cluster == "0001"){
-    	/* version number, not used */
-        
-    } else if (description_map.cluster == "0001"){
         /* battery voltage in mV (device needs minimium 2.1v to run) */
         log.debug "PlantLink - id ${device.zigbeeId} battery ${description_map.value}"
         event_name = "battery_status"
@@ -158,6 +155,10 @@ def parse(String description) {
 def parseDescriptionAsMap(description) {
     (description - "read attr - ").split(",").inject([:]) { map, param ->
         def nameAndValue = param.split(":")
-        map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
+        if(nameAndValue.length == 2){
+	        map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
+        }else{
+        	map += []
+        }
     }
 }

devicetypes/smartthings/ecobee-thermostat.src/ecobee-thermostat.groovy

@@ -30,7 +30,6 @@ metadata {
 		command "lowerSetpoint"
 		command "resumeProgram"
 		command "switchMode"
-		command "switchFanMode"
 
 		attribute "thermostatSetpoint","number"
 		attribute "thermostatStatus","string"
@@ -64,9 +63,10 @@ metadata {
 			state "updating", label:"Working", icon: "st.secondary.secondary"
 		}
 		standardTile("fanMode", "device.thermostatFanMode", inactiveLabel: false, decoration: "flat") {
-			state "auto", action:"switchFanMode", nextState: "updating", icon: "st.thermostat.fan-auto"
+			state "auto", label:'Fan: ${currentValue}', action:"switchFanMode", nextState: "on"
-			state "on", action:"switchFanMode", nextState: "updating", icon: "st.thermostat.fan-on"
+			state "on", label:'Fan: ${currentValue}', action:"switchFanMode", nextState: "off"
-			state "updating", label:"Working", icon: "st.secondary.secondary"
+			state "off", label:'Fan: ${currentValue}', action:"switchFanMode", nextState: "circulate"
+			state "circulate", label:'Fan: ${currentValue}', action:"switchFanMode", nextState: "auto"
 		}
 		standardTile("upButtonControl", "device.thermostatSetpoint", inactiveLabel: false, decoration: "flat") {
 			state "setpoint", action:"raiseSetpoint", icon:"st.thermostat.thermostat-up"
@@ -96,14 +96,14 @@ metadata {
 			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
 		standardTile("resumeProgram", "device.resumeProgram", inactiveLabel: false, decoration: "flat") {
-			state "resume", action:"resumeProgram", nextState: "updating", label:'Resume', icon:"st.samsung.da.oven_ic_send"
+			state "resume", action:"resumeProgram", nextState: "updating", label:'Resume Schedule', icon:"st.samsung.da.oven_ic_send"
 			state "updating", label:"Working", icon: "st.secondary.secondary"
 		}
 		valueTile("humidity", "device.humidity", decoration: "flat") {
-			state "humidity", label:'${currentValue}%'
+			state "humidity", label:'${currentValue}% humidity'
 		}
 		main "temperature"
-		details(["temperature", "upButtonControl", "thermostatSetpoint", "currentStatus", "downButtonControl", "mode", "fanMode","resumeProgram", "humidity", "refresh"])
+		details(["temperature", "upButtonControl", "thermostatSetpoint", "currentStatus", "downButtonControl", "mode", "resumeProgram", "refresh", "humidity"])
 	}
 
 	preferences {
@@ -154,9 +154,6 @@ def generateEvent(Map results) {
 			}  else if (name=="heatMode" || name=="coolMode" || name=="autoMode" || name=="auxHeatMode"){
 				isChange = isStateChange(device, name, value.toString())
 				event << [value: value.toString(), isStateChange: isChange, displayed: false]
-			}  else if (name=="thermostatFanMode"){
-				isChange = isStateChange(device, name, value.toString())
-				event << [value: value.toString(), isStateChange: isChange, displayed: false]
 			}  else if (name=="humidity") {
 				isChange = isStateChange(device, name, value.toString())
 				event << [value: value.toString(), isStateChange: isChange, displayed: false, unit: "%"]
@@ -204,11 +201,11 @@ private getThermostatDescriptionText(name, value, linkText) {
 
 void setHeatingSetpoint(setpoint) {
 	log.debug "***heating setpoint $setpoint"
-	def heatingSetpoint = setpoint
+	def heatingSetpoint = setpoint.toDouble()
-	def coolingSetpoint = device.currentValue("coolingSetpoint")
+	def coolingSetpoint = device.currentValue("coolingSetpoint").toDouble()
 	def deviceId = device.deviceNetworkId.split(/\./).last()
-	def maxHeatingSetpoint = device.currentValue("maxHeatingSetpoint")
+	def maxHeatingSetpoint = device.currentValue("maxHeatingSetpoint").toDouble()
-	def minHeatingSetpoint = device.currentValue("minHeatingSetpoint")
+	def minHeatingSetpoint = device.currentValue("minHeatingSetpoint").toDouble()
 
 	//enforce limits of heatingSetpoint
 	if (heatingSetpoint > maxHeatingSetpoint) {
@@ -241,11 +238,11 @@ void setHeatingSetpoint(setpoint) {
 
 void setCoolingSetpoint(setpoint) {
 	log.debug "***cooling setpoint $setpoint"
-	def heatingSetpoint = device.currentValue("heatingSetpoint")
+	def heatingSetpoint = device.currentValue("heatingSetpoint").toDouble()
-	def coolingSetpoint = setpoint
+	def coolingSetpoint = setpoint.toDouble()
 	def deviceId = device.deviceNetworkId.split(/\./).last()
-	def maxCoolingSetpoint = device.currentValue("maxCoolingSetpoint")
+	def maxCoolingSetpoint = device.currentValue("maxCoolingSetpoint").toDouble()
-	def minCoolingSetpoint = device.currentValue("minCoolingSetpoint")
+	def minCoolingSetpoint = device.currentValue("minCoolingSetpoint").toDouble()
 
 
 	if (coolingSetpoint > maxCoolingSetpoint) {
@@ -306,7 +303,7 @@ def modes() {
 }
 
 def fanModes() {
-	["on", "auto"]
+	["off", "on", "auto", "circulate"]
 }
 
 def switchMode() {
@@ -335,15 +332,17 @@ def switchFanMode() {
 	def returnCommand
 
 	switch (currentFanMode) {
-		case "on":
+		case "fanAuto":
-			returnCommand = switchToFanMode("auto")
+			returnCommand = switchToFanMode("fanOn")
 			break
-		case "auto":
+		case "fanOn":
-			returnCommand = switchToFanMode("on")
+			returnCommand = switchToFanMode("fanCirculate")
+			break
+		case "fanCirculate":
+			returnCommand = switchToFanMode("fanAuto")
 			break
-
 	}
-	if(!currentFanMode) { returnCommand = switchToFanMode("auto") }
+	if(!currentFanMode) { returnCommand = switchToFanMode("fanOn") }
 	returnCommand
 }
 
@@ -352,20 +351,25 @@ def switchToFanMode(nextMode) {
 	log.debug "switching to fan mode: $nextMode"
 	def returnCommand
 
-	if(nextMode == "auto") {
+	if(nextMode == "fanAuto") {
-		if(!fanModes.contains("auto")) {
+		if(!fanModes.contains("fanAuto")) {
 			returnCommand = fanAuto()
 		} else {
-			returnCommand = switchToFanMode("on")
+			returnCommand = switchToFanMode("fanOn")
 		}
-	} else if(nextMode == "on") {
+	} else if(nextMode == "fanOn") {
-		if(!fanModes.contains("on")) {
+		if(!fanModes.contains("fanOn")) {
 			returnCommand = fanOn()
 		} else {
-			returnCommand = switchToFanMode("auto")
+			returnCommand = switchToFanMode("fanCirculate")
+		}
+	} else if(nextMode == "fanCirculate") {
+		if(!fanModes.contains("fanCirculate")) {
+			returnCommand = fanCirculate()
+		} else {
+			returnCommand = switchToFanMode("fanAuto")
 		}
 	}
-
 	returnCommand
 }
 
@@ -375,10 +379,13 @@ def getDataByName(String name) {
 
 def setThermostatMode(String value) {
 	log.debug "setThermostatMode({$value})"
+
 }
 
 def setThermostatFanMode(String value) {
+
 	log.debug "setThermostatFanMode({$value})"
+
 }
 
 def generateModeEvent(mode) {
@@ -465,44 +472,22 @@ def auto() {
 
 def fanOn() {
 	log.debug "fanOn"
-	String fanMode = "on"
+//    parent.setFanMode (this,"on")
-	def heatingSetpoint = device.currentValue("heatingSetpoint")
-	def coolingSetpoint = device.currentValue("coolingSetpoint")
-	def deviceId = device.deviceNetworkId.split(/\./).last()
-
-	def sendHoldType = holdType ? (holdType=="Temporary")? "nextTransition" : (holdType=="Permanent")? "indefinite" : "indefinite" : "indefinite"
-
-	def coolingValue = location.temperatureScale == "C"? convertCtoF(coolingSetpoint) : coolingSetpoint
-	def heatingValue = location.temperatureScale == "C"? convertCtoF(heatingSetpoint) : heatingSetpoint
-
-	if (parent.setFanMode(this, heatingValue, coolingValue, deviceId, sendHoldType, fanMode)) {
-		generateFanModeEvent(fanMode)
-	} else {
-		log.debug "Error setting new mode."
-		def currentFanMode = device.currentState("thermostatFanMode")?.value
-		generateModeEvent(currentFanMode) // reset the tile back
-	}
 }
 
 def fanAuto() {
 	log.debug "fanAuto"
-	String fanMode = "auto"
+//    parent.setFanMode (this,"auto")
-	def heatingSetpoint = device.currentValue("heatingSetpoint")
+}
-	def coolingSetpoint = device.currentValue("coolingSetpoint")
-	def deviceId = device.deviceNetworkId.split(/\./).last()
 
-	def sendHoldType = holdType ? (holdType=="Temporary")? "nextTransition" : (holdType=="Permanent")? "indefinite" : "indefinite" : "indefinite"
+def fanCirculate() {
+	log.debug "fanCirculate"
+//    parent.setFanMode (this,"circulate")
+}
 
-	def coolingValue = location.temperatureScale == "C"? convertCtoF(coolingSetpoint) : coolingSetpoint
+def fanOff() {
-	def heatingValue = location.temperatureScale == "C"? convertCtoF(heatingSetpoint) : heatingSetpoint
+	log.debug "fanOff"
-
+//    parent.setFanMode (this,"off")
-	if (parent.setFanMode(this, heatingValue, coolingValue, deviceId, sendHoldType, fanMode)) {
-		generateFanModeEvent(fanMode)
-	} else {
-		log.debug "Error setting new mode."
-		def currentFanMode = device.currentState("thermostatFanMode")?.value
-		generateModeEvent(currentFanMode) // reset the tile back
-	}
 }
 
 def generateSetpointEvent() {
@@ -533,7 +518,6 @@ def generateSetpointEvent() {
 		coolingSetpoint = roundC(coolingSetpoint)
 	}
 
-
 	sendEvent("name":"maxHeatingSetpoint", "value":maxHeatingSetpoint, "unit":location.temperatureScale)
 	sendEvent("name":"maxCoolingSetpoint", "value":maxCoolingSetpoint, "unit":location.temperatureScale)
 	sendEvent("name":"minHeatingSetpoint", "value":minHeatingSetpoint, "unit":location.temperatureScale)

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -29,7 +29,6 @@ metadata {
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3305"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3325"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3326"
-		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3326-L", deviceJoinName: "Iris Motion Sensor"
 		fingerprint inClusters: "0000,0001,0003,000F,0020,0402,0500", outClusters: "0019", manufacturer: "SmartThings", model: "motionv4", deviceJoinName: "Motion Sensor"
 	}
 

devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy

@@ -16,18 +16,17 @@
  
 metadata {
 	definition (name: "SmartSense Open/Closed Sensor", namespace: "smartthings", author: "SmartThings") {
-		capability "Battery"
+    	capability "Battery"
 		capability "Configuration"
-		capability "Contact Sensor"
+        capability "Contact Sensor"
 		capability "Refresh"
 		capability "Temperature Measurement"
         
-		command "enrollResponse"
+        command "enrollResponse"
  
  
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3300-S"
-		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3300"
+        fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3300"
-		fingerprint inClusters: "0000,0001,0003,0020,0402,0500,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3320-L", deviceJoinName: "Iris Contact Sensor"
 	}
  
 	simulator {

devicetypes/smartthings/zigbee-switch-power.src/zigbee-switch-power.groovy

@@ -25,7 +25,6 @@ metadata {
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0702"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0702, 0B05", outClusters: "0003, 000A, 0019", manufacturer: "Jasco Products", model: "45853", deviceJoinName: "GE ZigBee Plug-In Switch"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0702, 0B05", outClusters: "000A, 0019", manufacturer: "Jasco Products", model: "45856", deviceJoinName: "GE ZigBee In-Wall Switch"
-        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 000F, 0B04", outClusters: "0019", manufacturer: "SmartThings", model: "outletv4", deviceJoinName: "Outlet"
     }
 
     tiles(scale: 2) {

smartapps/smartthings/ecobee-connect.src/ecobee-connect.groovy

@@ -257,16 +257,21 @@ def getEcobeeThermostats() {
 				}
 			} else {
 				log.debug "http status: ${resp.status}"
+				//refresh the auth token
+				if (resp.data.status.code == 14) {
+					log.debug "Storing the failed action to try later"
+					atomicState.action = "getEcobeeThermostats"
+					log.debug "Refreshing your auth_token!"
+					refreshAuthToken()
+				} else {
+					log.error "Authentication error, invalid authentication method, lack of credentials, etc."
+				}
 			}
 		}
-	} catch (groovyx.net.http.HttpResponseException e) {
+	} catch(Exception e) {
-        log.trace "Exception polling children: " + e.response.data.status
+		log.debug "___exception getEcobeeThermostats(): " + e
-        if (e.response.data.status.code == 14) {
+		refreshAuthToken()
-            atomicState.action = "getEcobeeThermostats"
+	}
-            log.debug "Refreshing your auth_token!"
-            refreshAuthToken()
-        }
-    }
 	atomicState.thermostats = stats
 	return stats
 }
@@ -417,8 +422,7 @@ def pollChildren(child = null) {
 							heatingSetpoint: stat.runtime.desiredHeat / 10,
 							coolingSetpoint: stat.runtime.desiredCool / 10,
 							thermostatMode: stat.settings.hvacMode,
-							humidity: stat.runtime.actualHumidity,
+							humidity: stat.runtime.actualHumidity
-							thermostatFanMode: stat.runtime.desiredFanMode
 					]
 
 					if (location.temperatureScale == "F")
@@ -445,15 +449,23 @@ def pollChildren(child = null) {
 				}
 				result = true
 				log.debug "updated ${atomicState.thermostats?.size()} stats: ${atomicState.thermostats}"
+			} else {
+				log.error "polling children & got http status ${resp.status}"
+
+				//refresh the auth token
+				if (resp.data.status.code == 14) {
+					atomicState.action = "pollChildren"
+					log.debug "Refreshing your auth_token!"
+					refreshAuthToken()
+				}
+				else {
+					log.error "Authentication error, invalid authentication method, lack of credentials, etc."
+				}
 			}
 		}
-	} catch (groovyx.net.http.HttpResponseException e) {
+	} catch(Exception e) {
-		log.trace "Exception polling children: " + e.response.data.status
+		log.debug "___exception polling children: " + e
-        if (e.response.data.status.code == 14) {
+		refreshAuthToken()
-            atomicState.action = "pollChildren"
-            log.debug "Refreshing your auth_token!"
-            refreshAuthToken()
-        }
 	}
 	return result
 }
@@ -629,14 +641,16 @@ private refreshAuthToken() {
 
 					}
 					atomicState.action = ""
+				} else {
+					log.debug "refresh failed ${resp.status} : ${resp.status.code}"
 				}
 			}
 		} catch (groovyx.net.http.HttpResponseException e) {
 			log.error "refreshAuthToken() >> Error: e.statusCode ${e.statusCode}"
 			def reAttemptPeriod = 300 // in sec
-			if (e.statusCode != 401) { // this issue might comes from exceed 20sec app execution, connectivity issue etc.
+			if (e.statusCode != 401) { //this issue might comes from exceed 20sec app execution, connectivity issue etc.
 				runIn(reAttemptPeriod, "refreshAuthToken")
-			} else if (e.statusCode == 401) { // unauthorized
+			} else if (e.statusCode == 401) { //refresh token is expired
 				atomicState.reAttempt = atomicState.reAttempt + 1
 				log.warn "reAttempt refreshAuthToken to try = ${atomicState.reAttempt}"
 				if (atomicState.reAttempt <= 3) {
@@ -662,19 +676,9 @@ def setHold(child, heating, cooling, deviceId, sendHoldType) {
 
 	int h = heating * 10
 	int c = cooling * 10
+
+
 	def jsonRequestBody = '{"selection":{"selectionType":"thermostats","selectionMatch":"' + deviceId + '","includeRuntime":true},"functions": [{ "type": "setHold", "params": { "coolHoldTemp": '+c+',"heatHoldTemp": '+h+', "holdType": '+sendHoldType+' } } ]}'
-
-	def result = sendJson(child, jsonRequestBody)
-	return result
-}
-
-def setFanMode(child, heating, cooling, deviceId, sendHoldType, fanMode) {
-
-	int h = heating * 10
-	int c = cooling * 10
-
-
-	def jsonRequestBody = '{"selection":{"selectionType":"thermostats","selectionMatch":"' + deviceId + '","includeRuntime":true},"functions": [{ "type": "setHold", "params": { "coolHoldTemp": '+c+',"heatHoldTemp": '+h+', "holdType": '+sendHoldType+', "fan": '+fanMode+' } } ]}'
 	def result = sendJson(child, jsonRequestBody)
 	return result
 }
@@ -709,21 +713,29 @@ def sendJson(child = null, String jsonBody) {
 					log.debug "Error return code = ${resp.data.status.code}"
 					debugEvent("Error return code = ${resp.data.status.code}")
 				}
+			} else {
+				log.error "sent Json & got http status ${resp.status} - ${resp.status.code}"
+				debugEvent ("sent Json & got http status ${resp.status} - ${resp.status.code}")
+
+				//refresh the auth token
+				if (resp.status.code == 14) {
+					log.debug "Refreshing your auth_token!"
+					debugEvent ("Refreshing OAUTH Token")
+					refreshAuthToken()
+					return false
+				} else {
+					debugEvent ("Authentication error, invalid authentication method, lack of credentials, etc.")
+					log.error "Authentication error, invalid authentication method, lack of credentials, etc."
+					return false
+				}
 			}
 		}
-	} catch (groovyx.net.http.HttpResponseException e) {
+	} catch(Exception e) {
-        log.trace "Exception Sending Json: " + e.response.data.status
+		log.debug "Exception Sending Json: " + e
-        debugEvent ("sent Json & got http status ${e.statusCode} - ${e.response.data.status.code}")
+		debugEvent ("Exception Sending JSON: " + e)
-        if (e.response.data.status.code == 14) {
+		refreshAuthToken()
-            atomicState.action = "pollChildren"
+		return false
-            log.debug "Refreshing your auth_token!"
+	}
-            refreshAuthToken()
-        }
-        else {
-            debugEvent("Authentication error, invalid authentication method, lack of credentials, etc.")
-            log.error "Authentication error, invalid authentication method, lack of credentials, etc."
-        }
-    }
 
 	if (returnStatus == 0)
 		return true