MSA-922: I have a device handler I made for the DSB29-ZWUS. It started with the basic Z-wave door/window switch and I modified it because the tamper switch was not reporting at all. I've used this successfully and it has been reporting correctly to my V1 hub. I would like this added as a device so that I can try to pair one from scratch without having to edit the device handler using the web GUI.

devicetypes/aeon/aeon-labs-ddsb29-zwus.src/aeon-labs-ddsb29-zwus.groovy

@@ -0,0 +1,125 @@
+/**
+ *  Aeon Labs DSB29-ZWUS Gen2
+ *
+ *  Original Author: SmartThings
+ *  Date: 2013-11-3
+ *  Modified By:  Varun
+ *  Modified Date: 2016-02-28
+ *  Updated original Zwave Door/Window Sensor report tamper alarm as open/close
+ */
+
+// for the UI
+metadata {
+	// Automatically generated. Make future change here.
+	definition (name: "Aeon Labs DSB29-ZWUS", namespace: "Aeon", author: "Varun") {
+    
+    capability "contact sensor"
+    capability "battery"
+
+    fingerprint profileId: "0x2001", inClusters: "0x30, 0x80, 0x84, 0x71, 0x70, 0x85, 0x86, 0x72"
+	}
+    
+
+	// simulator metadata
+	simulator {
+		// status messages
+		status "open":  "command: 2001, payload: FF"
+		status "closed": "command: 2001, payload: 00"
+	}
+
+	// UI tile definitions
+	tiles {
+		standardTile("contact", "device.contact", width: 2, height: 2) {
+			state "open", label: '${name}', icon: "st.contact.contact.open", backgroundColor: "#ffa81e"
+			state "closed", label: '${name}', icon: "st.contact.contact.closed", backgroundColor: "#79b821"
+		}
+        valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat") {
+			state "battery", label:'${currentValue}% battery', unit:""
+		}
+        
+		main "contact"
+		details(["contact", "battery"])
+	}
+}
+
+def parse(String description) {
+	def result = null
+	if (description.startsWith("Err")) {
+	    result = createEvent(descriptionText:description, displayed:true)
+	} else {
+		def cmd = zwave.parse(description, [0x20: 1, 0x25: 1, 0x30: 1, 0x31: 5, 0x80: 1, 0x84: 1, 0x71: 3, 0x9C: 1])
+		log.debug "PARSED ${cmd}"
+        if (cmd) {
+			result = zwaveEvent(cmd)
+		}
+	}
+	return result
+}
+
+def sensorValueEvent(Short value) {
+	if (value) {
+		createEvent(name: "contact", value: "open", descriptionText: "$device.displayName is open")
+	} else {
+		createEvent(name: "contact", value: "closed", descriptionText: "$device.displayName is closed")
+	}
+}
+
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd)
+{
+	sensorValueEvent(cmd.value)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd)
+{
+	sensorValueEvent(cmd.value)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.switchbinaryv1.SwitchBinaryReport cmd)
+{
+	sensorValueEvent(cmd.value)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.sensorbinaryv1.SensorBinaryReport cmd)
+{
+	sensorValueEvent(cmd.sensorValue)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.sensoralarmv1.SensorAlarmReport cmd)
+{
+	sensorValueEvent(cmd.sensorState)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cmd)
+{
+	sensorValueEvent(cmd.v1AlarmLevel)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd)
+{
+	def result = [createEvent(descriptionText: "${device.displayName} woke up", isStateChange: false)]
+	if (!state.lastbat || (new Date().time) - state.lastbat > 53*60*60*1000) {
+		result << response(zwave.batteryV1.batteryGet())
+		result << response("delay 1200")
+	}
+	result << response(zwave.wakeUpV1.wakeUpNoMoreInformation())
+	result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
+	def map = [ name: "battery", unit: "%" ]
+	if (cmd.batteryLevel == 0xFF) {
+		map.value = 1
+		map.descriptionText = "${device.displayName} has a low battery"
+		map.isStateChange = true
+	} else {
+		map.value = cmd.batteryLevel
+	}
+	state.lastbat = new Date().time
+	[createEvent(map), response(zwave.wakeUpV1.wakeUpNoMoreInformation())]
+}
+
+
+def zwaveEvent(physicalgraph.zwave.Command cmd) {
+	createEvent(descriptionText: "$device.displayName: $cmd", displayed: false)
+}

devicetypes/fuzzysb/aeon-water-sensor.src/aeon-water-sensor.groovy

@@ -1,240 +0,0 @@
-/**
- *  Copyright 2016 Stuart Buchanan
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- *	Aeon Water Sensor (DSB45-ZWEU/DSB45-ZWUS)
- *
- *	Author: Stuart Buchanan, Based on original work by Tosa with thanks
- *	Date: 2016-03-07
- */
-
-metadata {
-	definition (name: "Aeon Water Sensor", namespace: "fuzzysb", author: "Stuart Buchanan") {
-		capability "Water Sensor"
-		capability "Battery"
-		capability "Configuration"
-
-        fingerprint deviceId: "0x2001", inClusters: "0x30,0x80,0x84,0x71,0x70,0x85,0x86,0x72"
-	}
-
-	simulator {
-		status "dry": "command: 2001, payload: 00"
-		status "wet": "command: 2001, payload: FF"
-	}
-
-	
-tiles {
-		standardTile("water", "device.water", width: 2, height: 2) {
-			state "dry", icon:"st.alarm.water.dry", backgroundColor:"#ffffff"
-			state "wet", icon:"st.alarm.water.wet", backgroundColor:"#53a7c0"
-		}
-		valueTile("battery", "device.battery", inactiveLabel: false, canChangeBackground: true) {
-			state "battery", label:'${currentValue}% Battery', unit:"",
-            backgroundColors:[
-				[value: 19, color: "#BC2323"],
-				[value: 20, color: "#D04E00"],
-				[value: 30, color: "#D04E00"],
-				[value: 40, color: "#DAC400"],
-				[value: 41, color: "#79b821"]
-			]
-		}
-		standardTile("configure", "device.configure", inactiveLabel: false, decoration: "flat") {
-			state "configure", label:'', action:"configuration.configure", icon:"st.secondary.configure"
-		}
-		main "water"
-		details(["water", "battery", "configure"])
-	}
-}
-
-def parse(String description) {
-	def result = null
-	if (description.startsWith("Err 106")) {
-		if (state.sec) {
-			log.debug description
-		} else {
-			result = createEvent(
-				descriptionText: "This sensor failed to complete the network security key exchange. If you are unable to control it via SmartThings, you must remove it from your network and add it again.",
-				eventType: "ALERT",
-				name: "secureInclusion",
-				value: "failed",
-				isStateChange: true,
-			)
-		}
-	} else if (description != "updated") {
-		def cmd = zwave.parse(description, [0x20: 1, 0x25: 1, 0x30: 1, 0x31: 5, 0x80: 1, 0x84: 1, 0x71: 3, 0x9C: 1])
-		if (cmd) {
-			result = zwaveEvent(cmd)
-		}
-	}
-	log.debug "parsed '$description' to $result"
-	return result
-}
-
-def updated() {
-	def cmds = []
-	if (!state.MSR) {
-		cmds = [
-			zwave.manufacturerSpecificV2.manufacturerSpecificGet().format(),
-			"delay 1200",
-			zwave.wakeUpV1.wakeUpNoMoreInformation().format()
-		]
-	} else if (!state.lastbat) {
-		cmds = []
-	} else {
-		cmds = [zwave.wakeUpV1.wakeUpNoMoreInformation().format()]
-	}
-	response(cmds)
-}
-
-def configure() {
-	delayBetween([
-		zwave.manufacturerSpecificV2.manufacturerSpecificGet().format(),
-		batteryGetCommand()
-	], 6000)
-}
-
-def sensorValueEvent(value) {
-	if (value) {
-		createEvent(name: "water", value: "wet", descriptionText: "$device.displayName is wet")
-	} else {
-		createEvent(name: "water", value: "dry", descriptionText: "$device.displayName is dry")
-	}
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd)
-{
-	sensorValueEvent(cmd.value)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd)
-{
-	sensorValueEvent(cmd.value)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.switchbinaryv1.SwitchBinaryReport cmd)
-{
-	sensorValueEvent(cmd.value)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.sensorbinaryv1.SensorBinaryReport cmd)
-{
-	sensorValueEvent(cmd.sensorValue)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.sensoralarmv1.SensorAlarmReport cmd)
-{
-	sensorValueEvent(cmd.sensorState)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cmd)
-{
-	def result = []
-	if (cmd.notificationType == 0x06 && cmd.event == 0x16) {
-		result << sensorValueEvent(1)
-	} else if (cmd.notificationType == 0x06 && cmd.event == 0x17) {
-		result << sensorValueEvent(0)
-	} else if (cmd.notificationType == 0x07) {
-		if (cmd.v1AlarmType == 0x07) {  // special case for nonstandard messages from Monoprice door/window sensors
-			result << sensorValueEvent(cmd.v1AlarmLevel)
-		} else if (cmd.event == 0x01 || cmd.event == 0x02) {
-			result << sensorValueEvent(1)
-		} else if (cmd.event == 0x03) {
-			result << createEvent(descriptionText: "$device.displayName covering was removed", isStateChange: true)
-			result << response(zwave.wakeUpV1.wakeUpIntervalSet(seconds:4*3600, nodeid:zwaveHubNodeId))
-			if(!state.MSR) result << response(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
-		} else if (cmd.event == 0x05 || cmd.event == 0x06) {
-			result << createEvent(descriptionText: "$device.displayName detected glass breakage", isStateChange: true)
-		} else if (cmd.event == 0x07) {
-			if(!state.MSR) result << response(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
-			result << createEvent(name: "motion", value: "active", descriptionText:"$device.displayName detected motion")
-		}
-	} else if (cmd.notificationType) {
-		def text = "Notification $cmd.notificationType: event ${([cmd.event] + cmd.eventParameter).join(", ")}"
-		result << createEvent(name: "notification$cmd.notificationType", value: "$cmd.event", descriptionText: text, displayed: false)
-	} else {
-		def value = cmd.v1AlarmLevel == 255 ? "active" : cmd.v1AlarmLevel ?: "inactive"
-		result << createEvent(name: "alarm $cmd.v1AlarmType", value: value, displayed: false)
-	}
-	result
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd)
-{
-	def event = createEvent(descriptionText: "${device.displayName} woke up", isStateChange: false)
-	def cmds = []
-	if (!state.MSR) {
-		cmds << zwave.wakeUpV1.wakeUpIntervalSet(seconds:4*3600, nodeid:zwaveHubNodeId).format()
-		cmds << zwave.manufacturerSpecificV2.manufacturerSpecificGet().format()
-		cmds << "delay 1200"
-	}
-	if (!state.lastbat || now() - state.lastbat > 53*60*60*1000) {
-		cmds << batteryGetCommand()
-	} else {
-		cmds << zwave.wakeUpV1.wakeUpNoMoreInformation().format()
-	}
-	[event, response(cmds)]
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
-	def map = [ name: "battery", unit: "%" ]
-	if (cmd.batteryLevel == 0xFF) {
-		map.value = 1
-		map.descriptionText = "${device.displayName} has a low battery"
-		map.isStateChange = true
-	} else {
-		map.value = cmd.batteryLevel
-	}
-	state.lastbat = now()
-	[createEvent(map), response(zwave.wakeUpV1.wakeUpNoMoreInformation())]
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
-	def result = []
-
-	def msr = String.format("%04X-%04X-%04X", cmd.manufacturerId, cmd.productTypeId, cmd.productId)
-	log.debug "msr: $msr"
-	updateDataValue("MSR", msr)
-
-	result << createEvent(descriptionText: "$device.displayName MSR: $msr", isStateChange: false)
-
-	if (msr == "011A-0601-0901") {  // Enerwave motion doesn't always get the associationSet that the hub sends on join
-		result << response(zwave.associationV1.associationSet(groupingIdentifier:1, nodeId:zwaveHubNodeId))
-	} else if (!device.currentState("battery")) {
-		if (msr == "0086-0102-0059") {
-			result << response(zwave.securityV1.securityMessageEncapsulation().encapsulate(zwave.batteryV1.batteryGet()).format())
-		} else {
-			result << response(batteryGetCommand())
-		}
-	}
-
-	result
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
-	def encapsulatedCommand = cmd.encapsulatedCommand([0x20: 1, 0x85: 2, 0x70: 1])
-	// log.debug "encapsulated: $encapsulatedCommand"
-	if (encapsulatedCommand) {
-		state.sec = 1
-		zwaveEvent(encapsulatedCommand)
-	}
-}
-
-def zwaveEvent(physicalgraph.zwave.Command cmd) {
-	createEvent(descriptionText: "$device.displayName: $cmd", displayed: false)
-}
-
-def batteryGetCommand() {
-	def cmd = zwave.batteryV1.batteryGet()
-	if (state.sec) {
-		cmd = zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd)
-	}
-	cmd.format()
-}