MSA-924: Device Type has Buttons to test each of the 5 sounds as well as the usual capability alarm functions. The default sound for the siren can be changed via the device parameters (Defaults to the Emergency Sound)

devicetypes/fuzzysb/dlink-dch-z510.src/dlink-dch-z510.groovy

@@ -0,0 +1,263 @@
+/**
+ *  Copyright 2015 Stuart Buchanan
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ *	Dlink DCH-Z510
+ *
+ *	Author: fuzzysb
+ *	Date: 2015-01-05
+ */
+ 
+ 
+ 
+preferences {
+ input "defaultSound", "enum", title: "Default Sound to use for the Siren?", options: ["Emergency","FireAlarm","Ambulance","PoliceCar","DoorChime"], required: false, defaultValue: "Emergency"
+}
+ 
+metadata {
+ definition (name: "Dlink DCH-Z510", namespace: "fuzzysb", author: "Stuart Buchanan") {
+	capability "Actuator"
+	capability "Alarm"
+	capability "Switch"
+	capability "Configuration"
+
+	command "Emergency"
+	command "FireAlarm"
+	command "Ambulance"
+	command "PoliceCar"
+	command "DoorChime"
+    
+	fingerprint deviceId: "0x1005", inClusters: "0x5E,0x71,0x20,0x25,0x85,0x70,0x72,0x86,0x30,0x59,0x73,0x5A,0x98,0x7A"
+ }
+
+simulator {
+
+}
+
+ tiles(scale: 2) {
+	multiAttributeTile(name:"alarm", type: "generic", width: 6, height: 4){
+		tileAttribute ("device.alarm", key: "PRIMARY_CONTROL") {
+			attributeState "off", label:'off', action:'alarm.siren', icon:"st.alarm.alarm.alarm", backgroundColor:"#ffffff"
+			attributeState "both", label:'alarm!', action:'alarm.off', icon:"st.alarm.alarm.alarm", backgroundColor:"#e86d13"
+		}
+	}
+	standardTile("Emergency", "device.button", inactiveLabel: false, decoration: "flat", width: 1, height: 1) {
+		state "default", label:'Emergency', action:"Emergency", icon:"st.Weather.weather1"
+	}
+	standardTile("FireAlarm", "device.button", inactiveLabel: false, decoration: "flat", width: 1, height: 1) {
+		state "default", label:'Fire Alarm', action:"FireAlarm", icon:"st.Outdoor.outdoor10"
+	}
+	standardTile("Ambulance", "device.button", inactiveLabel: false, decoration: "flat", width: 1, height: 1) {
+		state "default", label:'Ambulance', action:"Ambulance", icon:"st.Transportation.transportation2"
+	}
+	standardTile("PoliceCar", "device.button", inactiveLabel: false, decoration: "flat", width: 1, height: 1) {
+		state "default", label:'Police Car', action:"PoliceCar", icon:"st.Transportation.transportation8"
+	}
+	standardTile("DoorChime", "device.button", inactiveLabel: false, decoration: "flat", width: 1, height: 1) {
+		state "default", label:'Door Chime', action:"DoorChime", icon:"st.Home.home30"
+	}
+	standardTile("off", "device.button", inactiveLabel: false, decoration: "flat", width: 1, height: 1) {
+		state "default", label:'', action:"alarm.off", icon:"st.secondary.off"
+	}
+	main "alarm"
+	details(["alarm", "Emergency", "FireAlarm", "Ambulance", "PoliceCar", "DoorChime", "off"])
+ }
+}
+
+def parse(String description)
+{
+	def result = null
+	if (description.startsWith("Err 106")) {
+		state.sec = 0
+		result = createEvent( name: "secureInclusion", value: "failed", isStateChange: true,
+			descriptionText: "This sensor failed to complete the network security key exchange. If you are unable to control it via SmartThings, you must remove it from your network and add it again.")
+	} else if (description != "updated") {
+		def cmd = zwave.parse(description, [0x20: 1, 0x25: 1, 0x26: 1, 0x70: 1, 0x80: 1])
+		if (cmd) {
+			result = zwaveEvent(cmd)
+            log.debug "Parse returned ${result?.inspect()}"
+            		} else {
+			log.debug("Couldn't zwave.parse '$description'")
+			null
+		}
+		
+	}
+	log.debug "Parsed '${description}' to ${result.inspect()}"
+	return result
+}
+
+
+
+def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
+	def encapsulatedCommand = cmd.encapsulatedCommand([0x20: 1, 0x25: 3, 0x26: 3, 0x70: 1, 0x80: 1])
+	state.sec = 1
+	log.debug "encapsulated: ${encapsulatedCommand}"
+	if (encapsulatedCommand) {
+		zwaveEvent(encapsulatedCommand)
+	} else {
+		log.warn "Unable to extract encapsulated cmd from $cmd"
+		createEvent(descriptionText: cmd.toString())
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityCommandsSupportedReport cmd) {
+	response(configure())
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.configurationv1.ConfigurationReport cmd) {
+    log.debug "---CONFIGURATION REPORT V2--- ${device.displayName} parameter ${cmd.parameterNumber} with a byte size of ${cmd.size} is set to ${cmd.configurationValue}"
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.switchbinaryv1.SwitchBinaryReport cmd)
+{
+	[name: "switch", value: cmd.value ? "on" : "off", type: "digital", displayed: true, isStateChange: true]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) {
+	log.debug "rx $cmd"
+	[
+		createEvent([name: "switch", value: cmd.value ? "on" : "off", displayed: false]),
+		createEvent([name: "alarm", value: cmd.value ? "both" : "off"])
+	]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.sensorbinaryv2.SensorBinaryReport cmd) {
+	createEvent(name:"Alarm", cmd.sensorValue ? "on" : "off")
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cmd) {
+if (cmd.notificationType == 6 && cmd.event == 22) {
+		log.debug "Playing Door Chime"
+	} else if (cmd.notificationType == 10 && cmd.event == 1) {
+		log.debug "Playing Police Car"
+	} else if (cmd.notificationType == 10 && cmd.event == 3) {
+    	log.debug "Playing Ambulance"
+    } else if (cmd.notificationType == 10 && cmd.event == 2) {
+    	log.debug "Playing Fire Alarm"
+    } else if (cmd.notificationType == 7 && cmd.event == 1) {
+    	log.debug "Playing Emergency"
+    }
+}
+
+def zwaveEvent(physicalgraph.zwave.Command cmd) {
+	log.debug "Unhandled: $cmd"
+    createEvent(descriptionText: cmd.toString(), isStateChange: false)
+}
+
+def strobe() {
+	on()
+}
+
+def siren() {
+	on()
+}
+
+def both() {
+	on()
+}
+
+def on() {
+	log.debug("Sounding Siren")
+	switch ( settings.defaultSound ) {
+		case "Emergency":
+		Emergency()
+		break
+		
+		case "FireAlarm":
+		FireAlarm()
+		break
+		
+		case "Ambulance":
+		Ambulance()
+		break
+		
+		case "PoliceCar":
+		PoliceCar()
+		break
+		
+		case "DoorChime":
+		DoorChime()
+		break
+		
+		default:
+		Emergency()
+		break
+	}
+}
+
+def off() {
+	log.debug "sending off"
+	[
+		secure(zwave.basicV1.basicSet(value: 0x00)),
+		secure(zwave.basicV1.basicGet())
+	]
+}
+
+def Emergency() {
+	log.debug "Sounding Siren With Emergency"
+	[
+		secure(zwave.notificationV3.notificationReport(event: 0x01, notificationType: 0x07)),
+		secure(zwave.basicV1.basicGet())
+	]
+}
+
+def FireAlarm() {
+	log.debug "Sounding Siren With Fire Alarm"
+	[
+		secure(zwave.notificationV3.notificationReport(event: 0x02, notificationType: 0x0A)),
+        secure(zwave.basicV1.basicGet())
+	]
+}
+
+def Ambulance() {
+	log.debug "Sounding Siren With Ambulance"
+	[
+		secure(zwave.notificationV3.notificationReport(event: 0x03, notificationType: 0x0A)),
+        secure(zwave.basicV1.basicGet())
+	]
+}
+
+def PoliceCar() {
+	log.debug "Sounding Siren With Police Car"
+	[
+		secure(zwave.notificationV3.notificationReport(event: 0x01, notificationType: 0x0A)),
+        secure(zwave.basicV1.basicGet())
+	]
+}
+
+def DoorChime() {
+	log.debug "Sounding Siren With Door Chime"
+	[
+		secure(zwave.notificationV3.notificationReport(event: 0x16, notificationType: 0x06)),
+        secure(zwave.basicV1.basicGet())
+	]
+}
+
+def configure() {
+	log.debug "Resetting Siren Parameters to SmartThings Compatible Defaults"
+	def cmds = []
+    
+	cmds << zwave.configurationV1.configurationSet(configurationValue: [0], parameterNumber: 4, size: 1)
+    cmds << zwave.configurationV1.configurationSet(configurationValue: [0], parameterNumber: 29, size: 1)
+    cmds << zwave.configurationV1.configurationSet(configurationValue: [6], parameterNumber: 31, size: 1)
+    
+    delayBetween(cmds, 500)
+}
+
+private secure(physicalgraph.zwave.Command cmd) {
+	if (state.sec) {
+         log.debug "Sending Secure Command $cmd"
+		zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
+	} else {
+    	log.debug "Sending Insecure Command $cmd"
+		cmd.format()
+	}
+}

devicetypes/smartthings/cree-bulb.src/cree-bulb.groovy

@@ -1,7 +1,7 @@
 /**
  *  Cree Bulb
  *
- *  Copyright 2016 SmartThings
+ *  Copyright 2014 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -15,29 +15,29 @@
  */
  
 metadata {
-    definition (name: "Cree Bulb", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Cree Bulb", namespace: "smartthings", author: "SmartThings") {
 
-        capability "Actuator"
+		capability "Actuator"
         capability "Configuration"
-        capability "Refresh"
+		capability "Refresh"
-        capability "Switch"
+		capability "Switch"
-        capability "Switch Level"
+		capability "Switch Level"
 
-        fingerprint profileId: "C05E", inClusters: "0000,0003,0004,0005,0006,0008,1000", outClusters: "0000,0019"
+		fingerprint profileId: "C05E", inClusters: "0000,0003,0004,0005,0006,0008,1000", outClusters: "0000,0019"
-    }
+	}
 
-    // simulator metadata
+	// simulator metadata
-    simulator {
+	simulator {
-        // status messages
+		// status messages
-        status "on": "on/off: 1"
+		status "on": "on/off: 1"
-        status "off": "on/off: 0"
+		status "off": "on/off: 0"
 
-        // reply messages
+		// reply messages
-        reply "zcl on-off on": "on/off: 1"
+		reply "zcl on-off on": "on/off: 1"
-        reply "zcl on-off off": "on/off: 0"
+		reply "zcl on-off off": "on/off: 0"
-    }
+	}
 
-    // UI tile definitions
+	// UI tile definitions
     tiles(scale: 2) {
         multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
             tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
@@ -62,12 +62,18 @@ metadata {
 def parse(String description) {
     log.debug "description is $description"
 
-    def resultMap = zigbee.getEvent(description)
+    def resultMap = zigbee.getKnownDescription(description)
     if (resultMap) {
-        sendEvent(resultMap)
+        log.info resultMap
+        if (resultMap.type == "update") {
+            log.info "$device updates: ${resultMap.value}"
+        }
+        else {
+            sendEvent(name: resultMap.type, value: resultMap.value)
+        }
     }
     else {
-        log.debug "DID NOT PARSE MESSAGE for description : $description"
+        log.warn "DID NOT PARSE MESSAGE for description : $description"
         log.debug zigbee.parseDescriptionAsMap(description)
     }
 }
@@ -81,7 +87,7 @@ def on() {
 }
 
 def setLevel(value) {
-    zigbee.setLevel(value) + ["delay 500"] + zigbee.levelRefresh()         //adding refresh because of ZLL bulb not conforming to send-me-a-report
+    zigbee.setLevel(value)
 }
 
 def refresh() {

devicetypes/smartthings/hue-bulb.src/hue-bulb.groovy

@@ -1,3 +1,4 @@
+
 /**
  *  Hue Bulb
  *
@@ -10,14 +11,13 @@ metadata {
 		capability "Switch Level"
 		capability "Actuator"
 		capability "Color Control"
-		capability "Color Temperature"
 		capability "Switch"
 		capability "Refresh"
 		capability "Sensor"
 
 		command "setAdjustedColor"
-        command "reset"
+		command "reset"
-        command "refresh"
+		command "refresh"
 	}
 
 	simulator {
@@ -25,7 +25,7 @@ metadata {
 	}
 
 	tiles (scale: 2){
-		multiAttributeTile(name:"rich-control", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
 			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
 				attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
 				attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
@@ -33,58 +33,23 @@ metadata {
 				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
 			}
 			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
-				attributeState "level", action:"switch level.setLevel", range:"(0..100)"
+				attributeState "level", action:"switch level.setLevel"
-            }
-            tileAttribute ("device.level", key: "SECONDARY_CONTROL") {
-	            attributeState "level", label: 'Level ${currentValue}%'
 			}
 			tileAttribute ("device.color", key: "COLOR_CONTROL") {
 				attributeState "color", action:"setAdjustedColor"
 			}
 		}
 
-		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
+		standardTile("reset", "device.reset", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
-			state "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-			state "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
-			state "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-		}
-
-        controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2000..6500)") {
-            state "colorTemperature", action:"color temperature.setColorTemperature"
-        }
-        valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-            state "colorTemperature", label: '${currentValue} K'
-        }
-
-		standardTile("reset", "device.reset", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
 			state "default", label:"Reset Color", action:"reset", icon:"st.lights.philips.hue-single"
 		}
-		standardTile("refresh", "device.switch", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
+		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
 			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
-		controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 2, inactiveLabel: false, range:"(0..100)") {
-			state "level", action:"switch level.setLevel"
-		}
-		valueTile("level", "device.level", inactiveLabel: false, decoration: "flat") {
-			state "level", label: 'Level ${currentValue}%'
-		}
-		controlTile("saturationSliderControl", "device.saturation", "slider", height: 1, width: 2, inactiveLabel: false) {
-			state "saturation", action:"color control.setSaturation"
-		}
-		valueTile("saturation", "device.saturation", inactiveLabel: false, decoration: "flat") {
-			state "saturation", label: 'Sat ${currentValue}    '
-		}
-		controlTile("hueSliderControl", "device.hue", "slider", height: 1, width: 2, inactiveLabel: false) {
-			state "hue", action:"color control.setHue"
-		}
-		valueTile("hue", "device.hue", inactiveLabel: false, decoration: "flat") {
-			state "hue", label: 'Hue ${currentValue}   '
-		}
-
-		main(["switch"])
-		details(["rich-control", "colorTempSliderControl", "colorTemp", "reset", "refresh"])
 	}
+
+	main(["switch"])
+	details(["switch", "levelSliderControl", "rgbSelector", "refresh", "reset"])
 }
 
 // parse events into attributes
@@ -154,27 +119,19 @@ void setColor(value) {
 
 void reset() {
 	log.debug "Executing 'reset'"
-    def value = [level:100, hex:"#90C638", saturation:56, hue:23]
+	def value = [level:100, hex:"#90C638", saturation:56, hue:23]
-    setAdjustedColor(value)
+	setAdjustedColor(value)
 	parent.poll()
 }
 
 void setAdjustedColor(value) {
 	if (value) {
-        log.trace "setAdjustedColor: ${value}"
+		log.trace "setAdjustedColor: ${value}"
-        def adjusted = value + [:]
+		def adjusted = value + [:]
-        adjusted.hue = adjustOutgoingHue(value.hue)
+		adjusted.hue = adjustOutgoingHue(value.hue)
-        // Needed because color picker always sends 100
+		// Needed because color picker always sends 100
-        adjusted.level = null
+		adjusted.level = null
-        setColor(adjusted)
+		setColor(adjusted)
-    }
-}
-
-void setColorTemperature(value) {
-	if (value) {
-        log.trace "setColorTemperature: ${value}k"
-        parent.setColorTemperature(this, value)
-        sendEvent(name: "colorTemperature", value: value)
 	}
 }
 

devicetypes/smartthings/hue-lux-bulb.src/hue-lux-bulb.groovy

@@ -9,59 +9,51 @@ metadata {
 	definition (name: "Hue Lux Bulb", namespace: "smartthings", author: "SmartThings") {
 		capability "Switch Level"
 		capability "Actuator"
-		capability "Color Temperature"
 		capability "Switch"
 		capability "Refresh"
 		capability "Sensor"
 
-        command "refresh"
+		command "refresh"
 	}
 
 	simulator {
 		// TODO: define status and reply messages here
 	}
 
-    tiles(scale: 2) {
+	tiles(scale: 2) {
-        multiAttributeTile(name:"rich-control", type: "lighting", canChangeIcon: true){
+		multiAttributeTile(name:"rich-control", type: "lighting", canChangeIcon: true){
-            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-              attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
-              attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+				attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-              attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
-              attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-            }
-            tileAttribute ("device.level", key: "SLIDER_CONTROL") {
-              attributeState "level", action:"switch level.setLevel", range:"(0..100)"
-            }
-            tileAttribute ("device.level", key: "SECONDARY_CONTROL") {
-	            attributeState "level", label: 'Level ${currentValue}%'
 			}
-        }
+			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+				attributeState "level", action:"switch level.setLevel", range:"(0..100)"
+			}
+			tileAttribute ("device.level", key: "SECONDARY_CONTROL") {
+				attributeState "level", label: 'Level ${currentValue}%'
+			}
+		}
 
 		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
 			state "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
 			state "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
 			state "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
 			state "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-        }
+		}
 
-        controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 2, inactiveLabel: false, range:"(0..100)") {
+		controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 2, inactiveLabel: false, range:"(0..100)") {
-            state "level", action:"switch level.setLevel"
+			state "level", action:"switch level.setLevel"
-        }
+		}
 
-        controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2000..6500)") {
+		standardTile("refresh", "device.switch", inactiveLabel: false, height: 2, width: 2, decoration: "flat") {
-            state "colorTemperature", action:"color temperature.setColorTemperature"
+			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-        }
+		}
-        valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-            state "colorTemperature", label: '${currentValue} K'
-        }
 
-        standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
+		main(["switch"])
-            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+		details(["rich-control", "refresh"])
-        }
+	}
-
-        main(["switch"])
-        details(["rich-control", "colorTempSliderControl", "colorTemp", "refresh"])
-    }
 }
 
 // parse events into attributes
@@ -98,14 +90,6 @@ void setLevel(percent) {
 	sendEvent(name: "level", value: percent)
 }
 
-void setColorTemperature(value) {
-	if (value) {
-        log.trace "setColorTemperature: ${value}k"
-        parent.setColorTemperature(this, value)
-        sendEvent(name: "colorTemperature", value: value)
-	}
-}
-
 void refresh() {
 	log.debug "Executing 'refresh'"
 	parent.manualRefresh()

devicetypes/test1/test.src/test.groovy

@@ -1,35 +0,0 @@
-/**
- *  TEST
- *
- *  Copyright 2016 김지섭
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-metadata {
-	definition (name: "TEST", namespace: "TEST1", author: "김지섭") {
-		capability "Temperature Measurement"
-	}
-
-	simulator {
-		// TODO: define status and reply messages here
-	}
-
-	tiles {
-		// TODO: define your main and details tiles here
-	}
-}
-
-// parse events into attributes
-def parse(String description) {
-	log.debug "Parsing '${description}'"
-	// TODO: handle 'temperature' attribute
-
-}

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -24,7 +24,7 @@ definition(
 	category: "SmartThings Labs",
 	iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/hue.png",
 	iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/hue@2x.png",
-        //singleInstance: true
+    singleInstance: true
 )
 
 preferences {
@@ -633,14 +633,6 @@ def setHue(childDevice, percent) {
 	put("lights/${getId(childDevice)}/state", [hue: level])
 }
 
-def setColorTemperature(childDevice, huesettings) {
-	log.debug "Executing 'setColorTemperature($huesettings)'"
-	def ct = Math.round(Math.abs((huesettings / 12.96829971181556) - 654))
-	def value = [ct: ct, on: true]
-	log.trace "sending command $value"
-	put("lights/${getId(childDevice)}/state", value)
-}
-
 def setColor(childDevice, huesettings) {
 	log.debug "Executing 'setColor($huesettings)'"
 	def hue = Math.min(Math.round(huesettings.hue * 65535 / 100), 65535)

smartapps/smartthings/virtual-thermostat.src/virtual-thermostat.groovy

@@ -140,3 +140,4 @@ private hasBeenRecentMotion()
 	}
 	isActive
 }
+