MSA-928: Device Handler for Aeon Water Sensor (DSB45-ZWEU/DSB45-ZWUS)

devicetypes/-/test.src/test.groovy

@@ -1,93 +0,0 @@
-/**
- *  TEST
- *
- *  Copyright 2016 박춘영
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-metadata {
-	definition (name: "TEST", namespace: "스마트보안", author: "박춘영") {
-		capability "Button"
-		capability "Samsung TV"
-	}
-
-	simulator {
-		// TODO: define status and reply messages here
-	}
-
-	tiles {
-		// TODO: define your main and details tiles here
-	}
-}
-
-// parse events into attributes
-def parse(String description) {
-	log.debug "Parsing '${description}'"
-	// TODO: handle 'button' attribute
-	// TODO: handle 'volume' attribute
-	// TODO: handle 'mute' attribute
-	// TODO: handle 'pictureMode' attribute
-	// TODO: handle 'soundMode' attribute
-	// TODO: handle 'switch' attribute
-	// TODO: handle 'messageButton' attribute
-
-}
-
-// handle commands
-def volumeUp() {
-	log.debug "Executing 'volumeUp'"
-	// TODO: handle 'volumeUp' command
-}
-
-def volumeDown() {
-	log.debug "Executing 'volumeDown'"
-	// TODO: handle 'volumeDown' command
-}
-
-def setVolume() {
-	log.debug "Executing 'setVolume'"
-	// TODO: handle 'setVolume' command
-}
-
-def mute() {
-	log.debug "Executing 'mute'"
-	// TODO: handle 'mute' command
-}
-
-def unmute() {
-	log.debug "Executing 'unmute'"
-	// TODO: handle 'unmute' command
-}
-
-def setPictureMode() {
-	log.debug "Executing 'setPictureMode'"
-	// TODO: handle 'setPictureMode' command
-}
-
-def setSoundMode() {
-	log.debug "Executing 'setSoundMode'"
-	// TODO: handle 'setSoundMode' command
-}
-
-def on() {
-	log.debug "Executing 'on'"
-	// TODO: handle 'on' command
-}
-
-def off() {
-	log.debug "Executing 'off'"
-	// TODO: handle 'off' command
-}
-
-def showMessage() {
-	log.debug "Executing 'showMessage'"
-	// TODO: handle 'showMessage' command
-}

devicetypes/fuzzysb/aeon-water-sensor.src/aeon-water-sensor.groovy

@@ -0,0 +1,240 @@
+/**
+ *  Copyright 2016 Stuart Buchanan
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ *	Aeon Water Sensor (DSB45-ZWEU/DSB45-ZWUS)
+ *
+ *	Author: Stuart Buchanan, Based on original work by Tosa with thanks
+ *	Date: 2016-03-07
+ */
+
+metadata {
+	definition (name: "Aeon Water Sensor", namespace: "fuzzysb", author: "Stuart Buchanan") {
+		capability "Water Sensor"
+		capability "Battery"
+		capability "Configuration"
+
+        fingerprint deviceId: "0x2001", inClusters: "0x30,0x80,0x84,0x71,0x70,0x85,0x86,0x72"
+	}
+
+	simulator {
+		status "dry": "command: 2001, payload: 00"
+		status "wet": "command: 2001, payload: FF"
+	}
+
+	
+tiles {
+		standardTile("water", "device.water", width: 2, height: 2) {
+			state "dry", icon:"st.alarm.water.dry", backgroundColor:"#ffffff"
+			state "wet", icon:"st.alarm.water.wet", backgroundColor:"#53a7c0"
+		}
+		valueTile("battery", "device.battery", inactiveLabel: false, canChangeBackground: true) {
+			state "battery", label:'${currentValue}% Battery', unit:"",
+            backgroundColors:[
+				[value: 19, color: "#BC2323"],
+				[value: 20, color: "#D04E00"],
+				[value: 30, color: "#D04E00"],
+				[value: 40, color: "#DAC400"],
+				[value: 41, color: "#79b821"]
+			]
+		}
+		standardTile("configure", "device.configure", inactiveLabel: false, decoration: "flat") {
+			state "configure", label:'', action:"configuration.configure", icon:"st.secondary.configure"
+		}
+		main "water"
+		details(["water", "battery", "configure"])
+	}
+}
+
+def parse(String description) {
+	def result = null
+	if (description.startsWith("Err 106")) {
+		if (state.sec) {
+			log.debug description
+		} else {
+			result = createEvent(
+				descriptionText: "This sensor failed to complete the network security key exchange. If you are unable to control it via SmartThings, you must remove it from your network and add it again.",
+				eventType: "ALERT",
+				name: "secureInclusion",
+				value: "failed",
+				isStateChange: true,
+			)
+		}
+	} else if (description != "updated") {
+		def cmd = zwave.parse(description, [0x20: 1, 0x25: 1, 0x30: 1, 0x31: 5, 0x80: 1, 0x84: 1, 0x71: 3, 0x9C: 1])
+		if (cmd) {
+			result = zwaveEvent(cmd)
+		}
+	}
+	log.debug "parsed '$description' to $result"
+	return result
+}
+
+def updated() {
+	def cmds = []
+	if (!state.MSR) {
+		cmds = [
+			zwave.manufacturerSpecificV2.manufacturerSpecificGet().format(),
+			"delay 1200",
+			zwave.wakeUpV1.wakeUpNoMoreInformation().format()
+		]
+	} else if (!state.lastbat) {
+		cmds = []
+	} else {
+		cmds = [zwave.wakeUpV1.wakeUpNoMoreInformation().format()]
+	}
+	response(cmds)
+}
+
+def configure() {
+	delayBetween([
+		zwave.manufacturerSpecificV2.manufacturerSpecificGet().format(),
+		batteryGetCommand()
+	], 6000)
+}
+
+def sensorValueEvent(value) {
+	if (value) {
+		createEvent(name: "water", value: "wet", descriptionText: "$device.displayName is wet")
+	} else {
+		createEvent(name: "water", value: "dry", descriptionText: "$device.displayName is dry")
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd)
+{
+	sensorValueEvent(cmd.value)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd)
+{
+	sensorValueEvent(cmd.value)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.switchbinaryv1.SwitchBinaryReport cmd)
+{
+	sensorValueEvent(cmd.value)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.sensorbinaryv1.SensorBinaryReport cmd)
+{
+	sensorValueEvent(cmd.sensorValue)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.sensoralarmv1.SensorAlarmReport cmd)
+{
+	sensorValueEvent(cmd.sensorState)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cmd)
+{
+	def result = []
+	if (cmd.notificationType == 0x06 && cmd.event == 0x16) {
+		result << sensorValueEvent(1)
+	} else if (cmd.notificationType == 0x06 && cmd.event == 0x17) {
+		result << sensorValueEvent(0)
+	} else if (cmd.notificationType == 0x07) {
+		if (cmd.v1AlarmType == 0x07) {  // special case for nonstandard messages from Monoprice door/window sensors
+			result << sensorValueEvent(cmd.v1AlarmLevel)
+		} else if (cmd.event == 0x01 || cmd.event == 0x02) {
+			result << sensorValueEvent(1)
+		} else if (cmd.event == 0x03) {
+			result << createEvent(descriptionText: "$device.displayName covering was removed", isStateChange: true)
+			result << response(zwave.wakeUpV1.wakeUpIntervalSet(seconds:4*3600, nodeid:zwaveHubNodeId))
+			if(!state.MSR) result << response(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
+		} else if (cmd.event == 0x05 || cmd.event == 0x06) {
+			result << createEvent(descriptionText: "$device.displayName detected glass breakage", isStateChange: true)
+		} else if (cmd.event == 0x07) {
+			if(!state.MSR) result << response(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
+			result << createEvent(name: "motion", value: "active", descriptionText:"$device.displayName detected motion")
+		}
+	} else if (cmd.notificationType) {
+		def text = "Notification $cmd.notificationType: event ${([cmd.event] + cmd.eventParameter).join(", ")}"
+		result << createEvent(name: "notification$cmd.notificationType", value: "$cmd.event", descriptionText: text, displayed: false)
+	} else {
+		def value = cmd.v1AlarmLevel == 255 ? "active" : cmd.v1AlarmLevel ?: "inactive"
+		result << createEvent(name: "alarm $cmd.v1AlarmType", value: value, displayed: false)
+	}
+	result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd)
+{
+	def event = createEvent(descriptionText: "${device.displayName} woke up", isStateChange: false)
+	def cmds = []
+	if (!state.MSR) {
+		cmds << zwave.wakeUpV1.wakeUpIntervalSet(seconds:4*3600, nodeid:zwaveHubNodeId).format()
+		cmds << zwave.manufacturerSpecificV2.manufacturerSpecificGet().format()
+		cmds << "delay 1200"
+	}
+	if (!state.lastbat || now() - state.lastbat > 53*60*60*1000) {
+		cmds << batteryGetCommand()
+	} else {
+		cmds << zwave.wakeUpV1.wakeUpNoMoreInformation().format()
+	}
+	[event, response(cmds)]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
+	def map = [ name: "battery", unit: "%" ]
+	if (cmd.batteryLevel == 0xFF) {
+		map.value = 1
+		map.descriptionText = "${device.displayName} has a low battery"
+		map.isStateChange = true
+	} else {
+		map.value = cmd.batteryLevel
+	}
+	state.lastbat = now()
+	[createEvent(map), response(zwave.wakeUpV1.wakeUpNoMoreInformation())]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
+	def result = []
+
+	def msr = String.format("%04X-%04X-%04X", cmd.manufacturerId, cmd.productTypeId, cmd.productId)
+	log.debug "msr: $msr"
+	updateDataValue("MSR", msr)
+
+	result << createEvent(descriptionText: "$device.displayName MSR: $msr", isStateChange: false)
+
+	if (msr == "011A-0601-0901") {  // Enerwave motion doesn't always get the associationSet that the hub sends on join
+		result << response(zwave.associationV1.associationSet(groupingIdentifier:1, nodeId:zwaveHubNodeId))
+	} else if (!device.currentState("battery")) {
+		if (msr == "0086-0102-0059") {
+			result << response(zwave.securityV1.securityMessageEncapsulation().encapsulate(zwave.batteryV1.batteryGet()).format())
+		} else {
+			result << response(batteryGetCommand())
+		}
+	}
+
+	result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
+	def encapsulatedCommand = cmd.encapsulatedCommand([0x20: 1, 0x85: 2, 0x70: 1])
+	// log.debug "encapsulated: $encapsulatedCommand"
+	if (encapsulatedCommand) {
+		state.sec = 1
+		zwaveEvent(encapsulatedCommand)
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.Command cmd) {
+	createEvent(descriptionText: "$device.displayName: $cmd", displayed: false)
+}
+
+def batteryGetCommand() {
+	def cmd = zwave.batteryV1.batteryGet()
+	if (state.sec) {
+		cmd = zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd)
+	}
+	cmd.format()
+}

devicetypes/smartthings/cree-bulb.src/cree-bulb.groovy

@@ -1,7 +1,7 @@
 /**
  *  Cree Bulb
  *
- *  Copyright 2016 SmartThings
+ *  Copyright 2014 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -15,29 +15,29 @@
  */
  
 metadata {
-    definition (name: "Cree Bulb", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Cree Bulb", namespace: "smartthings", author: "SmartThings") {
 
-        capability "Actuator"
+		capability "Actuator"
         capability "Configuration"
-        capability "Refresh"
+		capability "Refresh"
-        capability "Switch"
+		capability "Switch"
-        capability "Switch Level"
+		capability "Switch Level"
 
-        fingerprint profileId: "C05E", inClusters: "0000,0003,0004,0005,0006,0008,1000", outClusters: "0000,0019"
+		fingerprint profileId: "C05E", inClusters: "0000,0003,0004,0005,0006,0008,1000", outClusters: "0000,0019"
-    }
+	}
 
-    // simulator metadata
+	// simulator metadata
-    simulator {
+	simulator {
-        // status messages
+		// status messages
-        status "on": "on/off: 1"
+		status "on": "on/off: 1"
-        status "off": "on/off: 0"
+		status "off": "on/off: 0"
 
-        // reply messages
+		// reply messages
-        reply "zcl on-off on": "on/off: 1"
+		reply "zcl on-off on": "on/off: 1"
-        reply "zcl on-off off": "on/off: 0"
+		reply "zcl on-off off": "on/off: 0"
-    }
+	}
 
-    // UI tile definitions
+	// UI tile definitions
     tiles(scale: 2) {
         multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
             tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
@@ -62,12 +62,18 @@ metadata {
 def parse(String description) {
     log.debug "description is $description"
 
-    def resultMap = zigbee.getEvent(description)
+    def resultMap = zigbee.getKnownDescription(description)
     if (resultMap) {
-        sendEvent(resultMap)
+        log.info resultMap
+        if (resultMap.type == "update") {
+            log.info "$device updates: ${resultMap.value}"
+        }
+        else {
+            sendEvent(name: resultMap.type, value: resultMap.value)
+        }
     }
     else {
-        log.debug "DID NOT PARSE MESSAGE for description : $description"
+        log.warn "DID NOT PARSE MESSAGE for description : $description"
         log.debug zigbee.parseDescriptionAsMap(description)
     }
 }
@@ -81,7 +87,7 @@ def on() {
 }
 
 def setLevel(value) {
-    zigbee.setLevel(value) + ["delay 500"] + zigbee.levelRefresh()         //adding refresh because of ZLL bulb not conforming to send-me-a-report
+    zigbee.setLevel(value)
 }
 
 def refresh() {

devicetypes/smartthings/hue-bulb.src/hue-bulb.groovy

@@ -1,3 +1,4 @@
+
 /**
  *  Hue Bulb
  *
@@ -10,14 +11,13 @@ metadata {
 		capability "Switch Level"
 		capability "Actuator"
 		capability "Color Control"
-		capability "Color Temperature"
 		capability "Switch"
 		capability "Refresh"
 		capability "Sensor"
 
 		command "setAdjustedColor"
-        command "reset"
+		command "reset"
-        command "refresh"
+		command "refresh"
 	}
 
 	simulator {
@@ -25,7 +25,7 @@ metadata {
 	}
 
 	tiles (scale: 2){
-		multiAttributeTile(name:"rich-control", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
 			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
 				attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
 				attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
@@ -33,58 +33,23 @@ metadata {
 				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
 			}
 			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
-				attributeState "level", action:"switch level.setLevel", range:"(0..100)"
+				attributeState "level", action:"switch level.setLevel"
-            }
-            tileAttribute ("device.level", key: "SECONDARY_CONTROL") {
-	            attributeState "level", label: 'Level ${currentValue}%'
 			}
 			tileAttribute ("device.color", key: "COLOR_CONTROL") {
 				attributeState "color", action:"setAdjustedColor"
 			}
 		}
 
-		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
+		standardTile("reset", "device.reset", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
-			state "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-			state "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
-			state "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-		}
-
-        controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2000..6500)") {
-            state "colorTemperature", action:"color temperature.setColorTemperature"
-        }
-        valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-            state "colorTemperature", label: '${currentValue} K'
-        }
-
-		standardTile("reset", "device.reset", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
 			state "default", label:"Reset Color", action:"reset", icon:"st.lights.philips.hue-single"
 		}
-		standardTile("refresh", "device.switch", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
+		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
 			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
-		controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 2, inactiveLabel: false, range:"(0..100)") {
-			state "level", action:"switch level.setLevel"
-		}
-		valueTile("level", "device.level", inactiveLabel: false, decoration: "flat") {
-			state "level", label: 'Level ${currentValue}%'
-		}
-		controlTile("saturationSliderControl", "device.saturation", "slider", height: 1, width: 2, inactiveLabel: false) {
-			state "saturation", action:"color control.setSaturation"
-		}
-		valueTile("saturation", "device.saturation", inactiveLabel: false, decoration: "flat") {
-			state "saturation", label: 'Sat ${currentValue}    '
-		}
-		controlTile("hueSliderControl", "device.hue", "slider", height: 1, width: 2, inactiveLabel: false) {
-			state "hue", action:"color control.setHue"
-		}
-		valueTile("hue", "device.hue", inactiveLabel: false, decoration: "flat") {
-			state "hue", label: 'Hue ${currentValue}   '
-		}
-
-		main(["switch"])
-		details(["rich-control", "colorTempSliderControl", "colorTemp", "reset", "refresh"])
 	}
+
+	main(["switch"])
+	details(["switch", "levelSliderControl", "rgbSelector", "refresh", "reset"])
 }
 
 // parse events into attributes
@@ -154,27 +119,19 @@ void setColor(value) {
 
 void reset() {
 	log.debug "Executing 'reset'"
-    def value = [level:100, hex:"#90C638", saturation:56, hue:23]
+	def value = [level:100, hex:"#90C638", saturation:56, hue:23]
-    setAdjustedColor(value)
+	setAdjustedColor(value)
 	parent.poll()
 }
 
 void setAdjustedColor(value) {
 	if (value) {
-        log.trace "setAdjustedColor: ${value}"
+		log.trace "setAdjustedColor: ${value}"
-        def adjusted = value + [:]
+		def adjusted = value + [:]
-        adjusted.hue = adjustOutgoingHue(value.hue)
+		adjusted.hue = adjustOutgoingHue(value.hue)
-        // Needed because color picker always sends 100
+		// Needed because color picker always sends 100
-        adjusted.level = null
+		adjusted.level = null
-        setColor(adjusted)
+		setColor(adjusted)
-    }
-}
-
-void setColorTemperature(value) {
-	if (value) {
-        log.trace "setColorTemperature: ${value}k"
-        parent.setColorTemperature(this, value)
-        sendEvent(name: "colorTemperature", value: value)
 	}
 }
 

devicetypes/smartthings/hue-lux-bulb.src/hue-lux-bulb.groovy

@@ -9,59 +9,51 @@ metadata {
 	definition (name: "Hue Lux Bulb", namespace: "smartthings", author: "SmartThings") {
 		capability "Switch Level"
 		capability "Actuator"
-		capability "Color Temperature"
 		capability "Switch"
 		capability "Refresh"
 		capability "Sensor"
 
-        command "refresh"
+		command "refresh"
 	}
 
 	simulator {
 		// TODO: define status and reply messages here
 	}
 
-    tiles(scale: 2) {
+	tiles(scale: 2) {
-        multiAttributeTile(name:"rich-control", type: "lighting", canChangeIcon: true){
+		multiAttributeTile(name:"rich-control", type: "lighting", canChangeIcon: true){
-            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-              attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
-              attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+				attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-              attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
-              attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-            }
-            tileAttribute ("device.level", key: "SLIDER_CONTROL") {
-              attributeState "level", action:"switch level.setLevel", range:"(0..100)"
-            }
-            tileAttribute ("device.level", key: "SECONDARY_CONTROL") {
-	            attributeState "level", label: 'Level ${currentValue}%'
 			}
-        }
+			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+				attributeState "level", action:"switch level.setLevel", range:"(0..100)"
+			}
+			tileAttribute ("device.level", key: "SECONDARY_CONTROL") {
+				attributeState "level", label: 'Level ${currentValue}%'
+			}
+		}
 
 		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
 			state "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
 			state "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
 			state "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
 			state "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-        }
+		}
 
-        controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 2, inactiveLabel: false, range:"(0..100)") {
+		controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 2, inactiveLabel: false, range:"(0..100)") {
-            state "level", action:"switch level.setLevel"
+			state "level", action:"switch level.setLevel"
-        }
+		}
 
-        controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2000..6500)") {
+		standardTile("refresh", "device.switch", inactiveLabel: false, height: 2, width: 2, decoration: "flat") {
-            state "colorTemperature", action:"color temperature.setColorTemperature"
+			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-        }
+		}
-        valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-            state "colorTemperature", label: '${currentValue} K'
-        }
 
-        standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
+		main(["switch"])
-            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+		details(["rich-control", "refresh"])
-        }
+	}
-
-        main(["switch"])
-        details(["rich-control", "colorTempSliderControl", "colorTemp", "refresh"])
-    }
 }
 
 // parse events into attributes
@@ -98,14 +90,6 @@ void setLevel(percent) {
 	sendEvent(name: "level", value: percent)
 }
 
-void setColorTemperature(value) {
-	if (value) {
-        log.trace "setColorTemperature: ${value}k"
-        parent.setColorTemperature(this, value)
-        sendEvent(name: "colorTemperature", value: value)
-	}
-}
-
 void refresh() {
 	log.debug "Executing 'refresh'"
 	parent.manualRefresh()

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -24,7 +24,7 @@ definition(
 	category: "SmartThings Labs",
 	iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/hue.png",
 	iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/hue@2x.png",
-        //singleInstance: true
+    singleInstance: true
 )
 
 preferences {
@@ -633,14 +633,6 @@ def setHue(childDevice, percent) {
 	put("lights/${getId(childDevice)}/state", [hue: level])
 }
 
-def setColorTemperature(childDevice, huesettings) {
-	log.debug "Executing 'setColorTemperature($huesettings)'"
-	def ct = Math.round(Math.abs((huesettings / 12.96829971181556) - 654))
-	def value = [ct: ct, on: true]
-	log.trace "sending command $value"
-	put("lights/${getId(childDevice)}/state", value)
-}
-
 def setColor(childDevice, huesettings) {
 	log.debug "Executing 'setColor($huesettings)'"
 	def hue = Math.min(Math.round(huesettings.hue * 65535 / 100), 65535)