MSA-996: Philio Smart Energy Plug in Switch

devicetypes/astralink/philio-smart-energy-plug-in-switch.src/philio-smart-energy-plug-in-switch.groovy

@@ -0,0 +1,198 @@
+/**
+ *  Copyright 2015 Astralink
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+
+	definition (name: "Philio Smart Energy Plug in Switch", namespace: "astralink", author: "AstraLink"){
+		capability "Relay Switch"
+		capability "Power Meter"
+		capability "Energy Meter"
+		capability "Actuator"
+		capability "Switch"
+		capability "Configuration"
+		capability "Polling"
+		capability "Refresh"
+		capability "Sensor"   
+        
+        attribute "ManufacturerCode", "string"
+        attribute "ProductCode", "string"
+        attribute "ProduceTypeCode", "string"
+        attribute "WirelessConfig", "string"   
+		attribute "WakeUp", "string"	
+
+		fingerprint deviceId: "0x1001", inClusters: "0x5E, 0x86, 0x72, 0x98, 0x5A, 0x85, 0x59, 0x73, 0x25, 0x20, 0x27, 0x32, 0x70, 0x71, 0x75, 0x7A"
+	}
+
+	// simulator metadata
+	simulator {
+		status "on":  "command: 2003, payload: FF"
+		status "off": "command: 2003, payload: 00"
+
+		// reply messages
+		reply "2001FF,delay 100,2502": "command: 2503, payload: FF"
+		reply "200100,delay 100,2502": "command: 2503, payload: 00"
+	}
+    
+    	// tile definitions
+	tiles {
+		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
+			state "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821"
+			state "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff"
+		}
+		valueTile("power", "device.power", decoration: "flat") {
+			state "default", label:'${currentValue} W'
+		} 
+		valueTile("energy", "device.energy", decoration: "flat") {
+			state "default", label:'${currentValue} kWh'
+		}        
+		standardTile("configure", "device.power", inactiveLabel: false, decoration: "flat") {
+			state "configure", label:'', action:"configuration.configure", icon:"st.secondary.configure"
+		}
+		standardTile("refresh", "device.power", inactiveLabel: false, decoration: "flat") {
+			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+
+		main "switch"
+		details(["switch","power","energy","refresh","configure"])
+	}
+}
+
+def installed() {
+	zwave.manufacturerSpecificV1.manufacturerSpecificGet().format()
+}
+
+def parse(String description) {
+	def result = null
+	def cmd = zwave.parse(description, [0x20: 1, 0x70: 1])
+    
+    log.debug cmd
+
+	if (cmd) {
+		result = createEvent(zwaveEvent(cmd))
+	}
+	if (result?.name == 'hail' && hubFirmwareLessThan("000.011.00602")) {
+		result = [result, response(zwave.basicV1.basicGet())]
+		log.debug "Was hailed: requesting state update"
+	} else {
+		log.debug "Parse returned ${result?.descriptionText}"
+	}
+	return result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) {
+	[name: "switch", value: cmd.value ? "on" : "off", type: "physical"]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.switchbinaryv1.SwitchBinaryReport cmd) {
+	[name: "switch", value: cmd.value ? "on" : "off", type: "digital"]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.meterv3.MeterReport cmd) {
+		log.debug "MeterReport ${cmd}"
+
+	if (cmd.scale == 0) {
+		[name: "energy", value: cmd.scaledMeterValue, unit: "kWh"]
+	} else if (cmd.scale == 1) {
+		[name: "energy", value: cmd.scaledMeterValue, unit: "kVAh"]
+	}
+	else {
+		[name: "power", value: Math.round(cmd.scaledMeterValue), unit: "W"]
+	}
+}
+
+def configure() {
+	delayBetween([
+    	zwave.manufacturerSpecificV2.manufacturerSpecificGet().format(),  
+        zwave.associationV2.associationSet(groupingIdentifier:1, nodeId:[zwaveHubNodeId]).format(),
+		zwave.configurationV1.configurationSet(parameterNumber: 1, size: 2, scaledConfigurationValue: 12).format(),   // Watt Meter report 5s per unit
+		zwave.configurationV1.configurationSet(parameterNumber: 2, size: 2, scaledConfigurationValue: 2).format() // KWH report 10mins per unit
+	])
+}
+
+
+
+def zwaveEvent(physicalgraph.zwave.commands.configurationv1.ConfigurationReport cmd) {
+	def value = "when off"
+	if (cmd.configurationValue[0] == 1) {value = "when on"}
+	if (cmd.configurationValue[0] == 2) {value = "never"}
+	[name: "indicatorStatus", value: value, display: false]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.hailv1.Hail cmd) {
+	[name: "hail", value: "hail", descriptionText: "Switch button was pressed", displayed: false]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
+	def result = []
+
+	def msr = String.format("%04X-%04X-%04X", cmd.manufacturerId, cmd.productTypeId, cmd.productId)
+    def ManufacturerCode = String.format("%04X", cmd.manufacturerId)
+    def ProductCode = String.format("%04X", cmd.productId)
+    def ProduceTypeCode = String.format("%04X", cmd.productTypeId)
+    def WirelessConfig = "ZWP" 
+    
+    sendEvent(name: "ManufacturerCode", value: ManufacturerCode)
+    sendEvent(name: "ProductCode", value: ProductCode)
+    sendEvent(name: "ProduceTypeCode", value: ProduceTypeCode)
+    sendEvent(name: "WirelessConfig", value: WirelessConfig)
+    
+    result << createEvent(descriptionText: "$device.displayName MSR: $msr", isStateChange: false)
+	return result
+}
+
+def zwaveEvent(physicalgraph.zwave.Command cmd) {
+	return createEvent(descriptionText: "$device.displayName: $cmd", displayed: false)
+
+}
+
+def on() {
+	delayBetween([
+		zwave.basicV1.basicSet(value: 0xFF).format(),
+		zwave.switchBinaryV1.switchBinaryGet().format()
+	])
+}
+
+def off() {
+	delayBetween([
+		zwave.basicV1.basicSet(value: 0x00).format(),
+		zwave.switchBinaryV1.switchBinaryGet().format()
+	])
+}
+
+def poll() {
+	zwave.switchBinaryV1.switchBinaryGet().format()
+}
+
+def refresh() {
+	delayBetween([
+		zwave.switchBinaryV1.switchBinaryGet().format(),
+		zwave.manufacturerSpecificV1.manufacturerSpecificGet().format()
+	])
+}
+def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
+	def encapsulatedCommand = cmd.encapsulatedCommand([0x20: 1, 0x85: 2, 0x70: 1])
+	log.debug "encapsulated: $encapsulatedCommand"
+	if (encapsulatedCommand) {
+		state.sec = 1
+		zwaveEvent(encapsulatedCommand)
+	}
+}
+
+
+private secure(physicalgraph.zwave.Command cmd) {
+	zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
+}
+
+private secureSequence(commands, delay=200) {
+	delayBetween(commands.collect{ secure(it) }, delay)
+}

smartapps/osotech/plantlink-connector.src/plantlink-connector.groovy

@@ -87,10 +87,13 @@ def authPage(){
 }
 
 def installed() {
+    log.debug "Installed with settings: ${settings}"
     initialize()
 }
 
 def updated() {
+    log.debug "Updated with settings: ${settings}"
+    unsubscribe()
     initialize()
 }
 
@@ -103,24 +106,72 @@ def uninstalled() {
 }
 
 def initialize() {
-    unsubscribe()
+    atomicState.attached_sensors = [:]
     if (plantlinksensors){
+        subscribe(plantlinksensors, "moisture_status", moistureHandler)
+        subscribe(plantlinksensors, "battery_status", batteryHandler)
         plantlinksensors.each{ sensor_device ->
-        	subscribe(sensor_device, "moisture_status", moistureHandler)
+            sensor_device.setStatusIcon("Waiting on First Measurement")
-        	subscribe(sensor_device, "battery_status", batteryHandler)
             sensor_device.setInstallSmartApp("connectedToSmartApp")
         }
     }
 }
 
-def updatePlantNameIfNeeded(plant, expected_plant_name){
+def dock_sensor(device_serial, expected_plant_name) {
+    def docking_body_json_builder = new JsonBuilder([version: '1c', smartthings_device_id: device_serial])
+    def docking_params = [
+            uri        : appSettings.https_plantLinkServer,
+            path       : "/api/v1/smartthings/links",
+            headers    : ["Content-Type": "application/json", "Authorization": "Bearer ${atomicState.authToken}"],
+            contentType: "application/json",
+            body: docking_body_json_builder.toString()
+    ]
+    def plant_post_body_map = [
+            plant_type_key: 999999,
+            soil_type_key : 1000004
+    ]
+    def plant_post_params = [
+            uri        : appSettings.https_plantLinkServer,
+            path       : "/api/v1/plants",
+            headers    : ["Content-Type": "application/json", "Authorization": "Bearer ${atomicState.authToken}"],
+            contentType: "application/json",
+    ]
+    log.debug "Creating new plant on myplantlink.com - ${expected_plant_name}"
+    httpPost(docking_params) { docking_response ->
+        if (parse_api_response(docking_response, "Docking a link")) {
+            if (docking_response.data.plants.size() == 0) {
+                log.debug "creating plant for - ${expected_plant_name}"
+                plant_post_body_map["name"] = expected_plant_name
+                plant_post_body_map['links_key'] = [docking_response.data.key]
+                def plant_post_body_json_builder = new JsonBuilder(plant_post_body_map)
+                plant_post_params["body"] = plant_post_body_json_builder.toString()
+                httpPost(plant_post_params) { plant_post_response ->
+                    if(parse_api_response(plant_post_response, 'creating plant')){
+                        def attached_map = atomicState.attached_sensors
+                        attached_map[device_serial] = plant_post_response.data
+                        atomicState.attached_sensors = attached_map
+                    }
+                }
+            } else {
+                def plant = docking_response.data.plants[0]
+                def attached_map = atomicState.attached_sensors
+                attached_map[device_serial] = plant
+                atomicState.attached_sensors = attached_map
+                checkAndUpdatePlantIfNeeded(plant, expected_plant_name)
+            }
+        }
+    }
+    return true
+}
+
+def checkAndUpdatePlantIfNeeded(plant, expected_plant_name){
     def plant_put_params = [
 		uri : appSettings.https_plantLinkServer,
         headers : ["Content-Type": "application/json", "Authorization": "Bearer ${atomicState.authToken}"],
         contentType : "application/json"
     ]
     if (plant.name != expected_plant_name) {
-        log.debug "renaming plant ${plant.key} - ${expected_plant_name}"
+        log.debug "updating plant for - ${expected_plant_name}"
         plant_put_params["path"] = "/api/v1/plants/${plant.key}"
         def plant_put_body_map = [
 			name: expected_plant_name
@@ -134,39 +185,32 @@ def updatePlantNameIfNeeded(plant, expected_plant_name){
 }
 
 def moistureHandler(event){
-	log.debug "moistureHandler - ${event.value}"
+    def expected_plant_name = "SmartThings - ${event.displayName}"
-    
-    def expected_plant_name = "${event.displayName} (ST)"
     def device_serial = getDeviceSerialFromEvent(event)
-    def device_battery = atomicState["battery${device_serial}"]
+    
-    if ( device_battery == null){
+    if (!atomicState.attached_sensors.containsKey(device_serial)){
-    	log.error "Missing Battery Voltage - next cycle should have it"
+        dock_sensor(device_serial, expected_plant_name)
     }else{
-    	// {"type":"link","signal":"0x00","zigbeedeviceid":"0022A3000003D75A","created":1458843686,"moisture":"0x1987"}
-    	def appendedEventWithBatteryInfo = event.value.replace('}',",\"battery\":\"${device_battery}\"}")
-        log.debug "payload - ${appendedEventWithBatteryInfo}"
         def measurement_post_params = [
-            uri: appSettings.https_plantLinkServer,
+                uri: appSettings.https_plantLinkServer,
-            path: "/api/v1/smartthings/links/${device_serial}/measurements",
+                path: "/api/v1/smartthings/links/${device_serial}/measurements",
-            headers: ["Content-Type": "application/json", "Authorization": "Bearer ${atomicState.authToken}"],
+                headers: ["Content-Type": "application/json", "Authorization": "Bearer ${atomicState.authToken}"],
-            contentType: "application/json",
+                contentType: "application/json",
-            body: appendedEventWithBatteryInfo
+                body: event.value
         ]
-
         httpPost(measurement_post_params) { measurement_post_response ->
-            if (parse_api_response(measurement_post_response, 'creating moisture measurement') && measurement_post_response.data.size() >0){
+            if (parse_api_response(measurement_post_response, 'creating moisture measurement') &&
+                    measurement_post_response.data.size() >0){
                 def measurement = measurement_post_response.data[0]
                 def plant =  measurement.plant
-
+                log.debug plant
-                updatePlantNameIfNeeded(plant, expected_plant_name)
+                checkAndUpdatePlantIfNeeded(plant, expected_plant_name)
-
                 plantlinksensors.each{ sensor_device ->
                     if (sensor_device.id == event.deviceId){
                         sensor_device.setStatusIcon(plant.status)
                         if (plant.last_measurements && plant.last_measurements[0].moisture){
                             sensor_device.setPlantFuelLevel(plant.last_measurements[0].moisture * 100 as int)
                         }
-
                         if (plant.last_measurements && plant.last_measurements[0].battery){
                             sensor_device.setBatteryLevel(plant.last_measurements[0].battery * 100 as int)
                         }
@@ -180,7 +224,21 @@ def moistureHandler(event){
 def batteryHandler(event){
     def expected_plant_name = "SmartThings - ${event.displayName}"
     def device_serial = getDeviceSerialFromEvent(event)
-    atomicState["battery${device_serial}"] = getDeviceBatteryFromEvent(event)
+    
+    if (!atomicState.attached_sensors.containsKey(device_serial)){
+        dock_sensor(device_serial, expected_plant_name)
+    }else{
+        def measurement_post_params = [
+                uri: appSettings.https_plantLinkServer,
+                path: "/api/v1/smartthings/links/${device_serial}/measurements",
+                headers: ["Content-Type": "application/json", "Authorization": "Bearer ${atomicState.authToken}"],
+                contentType: "application/json",
+                body: event.value
+        ]
+        httpPost(measurement_post_params) { measurement_post_response ->
+            parse_api_response(measurement_post_response, 'creating battery measurement')
+        }
+    }
 }
 
 def getDeviceSerialFromEvent(event){
@@ -189,12 +247,6 @@ def getDeviceSerialFromEvent(event){
     return match_result[0][1]
 }
 
-def getDeviceBatteryFromEvent(event){
-    def pattern = /.*"battery"\s*:\s*"(\w+)".*/
-    def match_result = (event.value =~ pattern)
-    return match_result[0][1]
-}
-
 def oauthInitUrl(){
 	atomicState.oauthInitState = UUID.randomUUID().toString()
     def oauthParams = [
@@ -211,13 +263,12 @@ def buildRedirectUrl(){
 }
 
 def swapToken(){
-	log.debug "PlantLink Connector - OAuth Token"
     def code = params.code
     def oauthState = params.state
     def stcid = appSettings.client_id
     def postParams = [
             method: 'POST',
-            uri: appSettings.https_plantLinkServer,
+            uri: "https://oso-tech.appspot.com",
             path: "/api/v1/oauth-token",
             query: [grant_type:'authorization_code', code:params.code, client_id:stcid,
                     client_secret:appSettings.client_secret, redirect_uri: buildRedirectUrl()],
@@ -270,11 +321,10 @@ def swapToken(){
 }
 
 private refreshAuthToken() {
-	log.debug "PlantLink Connector - Refresh OAuth"
     def stcid = appSettings.client_id
     def refreshParams = [
             method: 'POST',
-            uri: appSettings.https_plantLinkServer,
+            uri: "https://hardware-dot-oso-tech.appspot.com",
             path: "/api/v1/oauth-token",
             query: [grant_type:'refresh_token', code:"${atomicState.refreshToken}", client_id:stcid,
                     client_secret:appSettings.client_secret],
@@ -283,6 +333,7 @@ private refreshAuthToken() {
         def jsonMap
         httpPost(refreshParams) { resp ->
             if(resp.status == 200){
+                log.debug "OAuth Token refreshed"
                 jsonMap = resp.data
                 if (resp.data) {
                     atomicState.refreshToken = resp?.data?.refresh_token
@@ -295,12 +346,12 @@ private refreshAuthToken() {
                 }
                 data.action = ""
             }else{
-                log.debug "PlantLink Server - ${resp.status} : ${resp.status.code}"
+                log.debug "refresh failed ${resp.status} : ${resp.status.code}"
             }
         }
     }
     catch(Exception e){
-        log.debug "PlantLink Connector - OAuth Refresh Failed: " + e
+        log.debug "caught exception refreshing auth token: " + e
     }
 }
 
@@ -313,7 +364,7 @@ def parse_api_response(resp, message) {
             refreshAuthToken()
             return false
         } else {
-            debugEvent("Plantlink Error: ${resp.status} - ${resp.status.code}", true)
+            debugEvent("Authentication error, invalid authentication method, lack of credentials, etc.", true)
             return false
         }
     }

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -161,7 +161,7 @@ private sendDeveloperReq() {
 		headers: [
 			HOST: host
 		],
-		body: [devicetype: "$token-0"]], "${selectedHue}"))
+		body: [devicetype: "$token-0", username: "$token-0"]], "${selectedHue}"))
 }
 
 private discoverHueBulbs() {