Merge pull request #903 from SmartThingsCommunity/staging

Rolling up staging to production Deploy May 17

devicetypes/smartthings/arrival-sensor-ha.src/arrival-sensor-ha.groovy

@@ -12,16 +12,6 @@
  *
  */
  
- /*
- *  Purpose: Arrival Sensor HA DTH File
- *
- *  Filename: Arrival-Sensor-HA.src/Arrival-Sensor-HA.groovy
- *
- *  Change History:
- *  1. 20160115 TW - Update/Edit to support i18n translations
- *  2. 20160121 TW - Update to V4 battery calcs, added pref's page title translations
- */
- 
 metadata {
     definition (name: "Arrival Sensor HA", namespace: "smartthings", author: "SmartThings") {
         capability "Tone"

devicetypes/smartthings/arrival-sensor-ha.src/i18n/messages.properties

@@ -1,4 +1,3 @@
-#==============================================================================
 #  Copyright 2016 SmartThings
 #
 #  Licensed under the Apache License, Version 2.0 (the "License"); you may not
@@ -12,15 +11,6 @@
 #  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
 #  License for the specific language governing permissions and limitations
 #  under the License.
-#==============================================================================
-# Purpose: Arrival Sensor HA i18n Translation File
-#
-# Filename: Arrival-Sensor-HA.src/i18n/messages.properties
-#
-# Change History:
-#	1. 20160115 TW Initial release with informal Korean translation.
-#	2. 20160121 TW Added def preference section titles.
-#==============================================================================
 # Korean (ko)
 # Device Preferences
 '''Give your device a name'''.ko=기기 이름 설정

devicetypes/smartthings/cree-bulb.src/cree-bulb.groovy

@@ -13,12 +13,13 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
- 
+
 metadata {
     definition (name: "Cree Bulb", namespace: "smartthings", author: "SmartThings") {
 
         capability "Actuator"
         capability "Configuration"
+        capability "Polling"
         capability "Refresh"
         capability "Switch"
         capability "Switch Level"
@@ -88,6 +89,10 @@ def refresh() {
     zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.onOffConfig() + zigbee.levelConfig()
 }
 
+def poll() {
+    zigbee.onOffRefresh() + zigbee.levelRefresh()
+}
+
 def configure() {
     log.debug "Configuring Reporting and Bindings."
     zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()

devicetypes/smartthings/ge-link-bulb.src/ge-link-bulb.groovy

@@ -1,7 +1,7 @@
 /**
  *  GE Link Bulb
  *
- *  Copyright 2014 SmartThings
+ *  Copyright 2016 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -53,6 +53,8 @@ metadata {
         capability "Polling"
 
         fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,1000", outClusters: "0019", manufacturer: "GE_Appliances", model: "ZLL Light", deviceJoinName: "GE Link Bulb"
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,1000", outClusters: "0019", manufacturer: "GE", model: "SoftWhite", deviceJoinName: "GE Link Soft White Bulb"
+        fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,1000", outClusters: "0019", manufacturer: "GE", model: "Daylight", deviceJoinName: "GE Link Daylight Bulb"
     }
 
 	// UI tile definitions

devicetypes/smartthings/mobile-presence.src/i18n/messages.properties

@@ -1,4 +1,3 @@
-#==============================================================================
 #  Copyright 2016 SmartThings
 #
 #  Licensed under the Apache License, Version 2.0 (the "License"); you may not 
@@ -12,15 +11,6 @@
 #  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the 
 #  License for the specific language governing permissions and limitations 
 #  under the License.
-#==============================================================================
-# Purpose: Mobile Presence i18n Translation File
-#
-# Filename: mobile-presence.src/i18n/messages.properties
-#
-# Change History:
-#	1. 20160205 TW Initial release with informal Korean translation.
-#	2. 20160224 TW Updated with formal Korean translation.
-#==============================================================================
 # Korean (ko)
 # Device Preferences
 '''Give your device a name'''.ko=기기 이름 설정

devicetypes/smartthings/mobile-presence.src/mobile-presence.groovy

@@ -1,5 +1,4 @@
 /*
-===============================================================================
  *  Copyright 2016 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not
@@ -13,14 +12,6 @@
  *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the 
  *  License for the specific language governing permissions and limitations 
  *  under the License.
-===============================================================================
- *  Purpose: Mobile Presence DTH File
- *
- *  Filename: mobile-presence.src/mobile-presence.groovy
- *
- *  Change History:
- *  1. 20160205 TW - Update/Edit to support i18n translations
-===============================================================================
  */
  
 metadata {

devicetypes/smartthings/nyce-open-closed-sensor.src/nyce-open-closed-sensor.groovy

@@ -24,6 +24,7 @@ metadata {
         command "enrollResponse"
  
  
+ 		fingerprint inClusters: "0000,0001,0003,0500,0020", manufacturer: "NYCE", model: "3010", deviceJoinName: "NYCE Door Hinge Sensor"
 		fingerprint inClusters: "0000,0001,0003,0406,0500,0020", manufacturer: "NYCE", model: "3011", deviceJoinName: "NYCE Door/Window Sensor"
         fingerprint inClusters: "0000,0001,0003,0500,0020", manufacturer: "NYCE", model: "3011", deviceJoinName: "NYCE Door/Window Sensor"
         fingerprint inClusters: "0000,0001,0003,0406,0500,0020", manufacturer: "NYCE", model: "3014", deviceJoinName: "NYCE Tilt Sensor"

devicetypes/smartthings/smartpower-outlet.src/i18n/messages.properties

@@ -1,4 +1,3 @@
-#==============================================================================
 #  Copyright 2016 SmartThings
 #
 #  Licensed under the Apache License, Version 2.0 (the "License"); you may not
@@ -12,14 +11,6 @@
 #  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
 #  License for the specific language governing permissions and limitations
 #  under the License.
-#==============================================================================
-# Purpose: SmartPower Outlet i18n Translation File
-#
-# Filename: SmartPower-Outlet.src/i18n/messages.properties
-#
-# Change History:
-#	1. 20160116 TW Initial release with informal Korean translation.
-#==============================================================================
 # Korean (ko)
 # Device Preferences
 '''Give your device a name'''.ko=기기 이름 설정

devicetypes/smartthings/smartpower-outlet.src/smartpower-outlet.groovy

@@ -1,5 +1,4 @@
 /*
-===============================================================================
  *  Copyright 2016 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not
@@ -13,15 +12,8 @@
  *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
  *  License for the specific language governing permissions and limitations
  *  under the License.
-===============================================================================
- *  Purpose: SmartPower Outlet DTH File
- *
- *  Filename: SmartPower-Outlet.src/SmartPower-Outlet.groovy
- *
- *  Change History:
- *  1. 20160117 TW - Update/Edit to support i18n translations
-===============================================================================
  */
+
 metadata {
 	// Automatically generated. Make future change here.
 	definition (name: "SmartPower Outlet", namespace: "smartthings", author: "SmartThings") {
@@ -31,6 +23,7 @@ metadata {
 		capability "Configuration"
 		capability "Refresh"
 		capability "Sensor"
+		capability "Health Check"
 
 		// indicates that device keeps track of heartbeat (in state.heartbeat)
 		attribute "heartbeat", "string"
@@ -136,6 +129,7 @@ def refresh() {
 }
 
 def configure() {
+	sendEvent(name: "checkInterval", value: 1200, displayed: false)
 	zigbee.onOffConfig() + powerConfig() + refresh()
 }
 

devicetypes/smartthings/smartsense-moisture-sensor.src/i18n/messages.properties

@@ -1,4 +1,3 @@
-#==============================================================================
 #  Copyright 2016 SmartThings
 #
 #  Licensed under the Apache License, Version 2.0 (the "License"); you may not
@@ -12,14 +11,6 @@
 #  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
 #  License for the specific language governing permissions and limitations
 #  under the License.
-#==============================================================================
-# Purpose: SmartSense Moisture Sensor i18n Translation File
-#
-# Filename: SmartSense-Moisture-Sensor.src/i18n/messages.properties
-#
-# Change History:
-#	1. 20160116 TW Initial release with formal Korean translation.
-#==============================================================================
 # Korean (ko)
 # Device Preferences
 '''Dry'''.ko=건조

devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy

@@ -1,5 +1,4 @@
 /*
-===============================================================================
  *  Copyright 2016 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not
@@ -13,15 +12,6 @@
  *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
  *  License for the specific language governing permissions and limitations
  *  under the License.
-===============================================================================
- *  Purpose: SmartSense Moisture Sensor DTH File
- *
- *  Filename: SmartSense-Moisture-Sensor.src/SmartSense-Moisture-Sensor.groovy
- *
- *  Change History:
- *  1. 20160116 TW - Update/Edit to support i18n translations
- *  2. 20160125 TW = Incorporated new battery mapping from TM
-===============================================================================
  */
 
 metadata {
@@ -31,6 +21,7 @@ metadata {
 		capability "Refresh"
 		capability "Temperature Measurement"
 		capability "Water Sensor"
+		capability "Health Check"
 
 		command "enrollResponse"
 
@@ -320,6 +311,8 @@ def refresh() {
 }
 
 def configure() {
+	sendEvent(name: "checkInterval", value: 7200, displayed: false)
+
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."
 	def configCmds = [

devicetypes/smartthings/smartsense-motion-sensor.src/i18n/messages.properties

@@ -1,4 +1,3 @@
-#==============================================================================
 #  Copyright 2016 SmartThings
 #
 #  Licensed under the Apache License, Version 2.0 (the "License"); you may not
@@ -12,15 +11,6 @@
 #  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
 #  License for the specific language governing permissions and limitations
 #  under the License.
-#==============================================================================
-# Purpose: SmartSense Motion Sensor i18n Translation File
-#
-# Filename: SmartSense-Motion-Sensor.src/i18n/messages.properties
-#
-# Change History:
-#	1. 20160116 TW Initial release with formal Korean translation.
-#	2. 20160224 TW Updated formal Korean translations from Mike Stoller.
-#==============================================================================
 # Korean (ko)
 # Device Preferences
 '''battery'''.ko=배터리

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -1,5 +1,4 @@
 /*
-===============================================================================
  *  Copyright 2016 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not
@@ -13,15 +12,6 @@
  *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
  *  License for the specific language governing permissions and limitations
  *  under the License.
-===============================================================================
- *  Purpose: SmartSense Motion Sensor DTH File
- *
- *  Filename: SmartSense-Motion-Sensor.src/SmartSense-Motion-Sensor.groovy
- *
- *  Change History:
- *  1. 20160116 TW - Update/Edit to support i18n translations
- *  2. 20160125 TW = Incorporated new battery mapping from TM
-===============================================================================
  */
 
 metadata {
@@ -31,6 +21,7 @@ metadata {
 		capability "Battery"
 		capability "Temperature Measurement"
 		capability "Refresh"
+		capability "Health Check"
 
 		command "enrollResponse"
 
@@ -332,6 +323,8 @@ def refresh() {
 }
 
 def configure() {
+	sendEvent(name: "checkInterval", value: 7200, displayed: false)
+
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."
 

devicetypes/smartthings/smartsense-multi-sensor.src/i18n/messages.properties

@@ -1,4 +1,3 @@
-#==============================================================================
 #  Copyright 2016 SmartThings
 #
 #  Licensed under the Apache License, Version 2.0 (the "License"); you may not
@@ -12,14 +11,6 @@
 #  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
 #  License for the specific language governing permissions and limitations
 #  under the License.
-#==============================================================================
-# Purpose: SmartSense Multi Sensor i18n Translation File
-#
-# Filename: SmartSense-Multi-Sensor.src/i18n/messages.properties
-#
-# Change History:
-#	1. 20160117 TW Initial release with informal Korean translation.
-#==============================================================================
 # Korean (ko)
 # Device Preferences
 '''Yes'''.ko=예

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -1,5 +1,4 @@
 /*
-===============================================================================
  *  Copyright 2016 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not
@@ -13,15 +12,6 @@
  *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
  *  License for the specific language governing permissions and limitations
  *  under the License.
-===============================================================================
- *  Purpose: SmartSense Multi Sensor DTH File
- *
- *  Filename: SmartSense-Multi-Sensor.src/SmartSense-Multi-Sensor.groovy
- *
- *  Change History:
- *  1. 20160117 TW - Update/Edit to support i18n translations
- *  2. 20160125 TW = Incorporated new battery mapping from TM
-===============================================================================
  */
 
 metadata {
@@ -35,6 +25,7 @@ metadata {
  		capability "Acceleration Sensor"
  		capability "Refresh"
  		capability "Temperature Measurement"
+		capability "Health Check"
 
  		command "enrollResponse"
  		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3320"
@@ -450,6 +441,8 @@ def refresh() {
 }
 
 def configure() {
+	sendEvent(name: "checkInterval", value: 7200, displayed: false)
+
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting"
 

devicetypes/smartthings/smartsense-open-closed-accelerometer-sensor.src/smartsense-open-closed-accelerometer-sensor.groovy

@@ -23,8 +23,9 @@
  		capability "Acceleration Sensor"
  		capability "Refresh"
  		capability "Temperature Measurement"
- 		command "enrollResponse"
+		capability "Health Check"
 
+		command "enrollResponse"
  	}
 
  	simulator {
@@ -299,6 +300,7 @@ def getTemperature(value) {
 	}
 
 def configure() {
+	sendEvent(name: "checkInterval", value: 7200, displayed: false)
 
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy

@@ -20,6 +20,7 @@ metadata {
 		capability "Refresh"
 		capability "Temperature Measurement"
 		capability "Relative Humidity Measurement"
+		capability "Health Check"
 
 		fingerprint endpointId: "01", inClusters: "0001,0003,0020,0402,0B05,FC45", outClusters: "0019,0003"
 	}
@@ -251,6 +252,7 @@ def refresh()
 }
 
 def configure() {
+	sendEvent(name: "checkInterval", value: 7200, displayed: false)
 
 	log.debug "Configuring Reporting and Bindings."
 	def configCmds = [

devicetypes/smartthings/tile-ux/tile-basic-standard.src/tile-basic-standard.groovy

@@ -80,19 +80,31 @@ metadata {
 			state "default", label:''
 		}
 
-		main("standard1")
+		// multi-line text (explicit newlines)
+		standardTile("multiLine", "device.multiLine", width: 2, height: 2) {
+			state "default", label: '${currentValue}'
+		}
+
+		standardTile("multiLineWithIcon", "device.multiLine", width: 2, height: 2) {
+			state "default", label: '${currentValue}', icon: "st.switches.switch.off"
+		}
+
+		main("actionRings")
 		details([
 			"actionRings", "actionFlat", "noActionFlat",
 
 			"flatLabel", "flatIconLabel", "flatIcon",
 
 			"flatDefaultState", "flatImplicitDefaultState1", "flatImplicitDefaultState2",
+
+			"multiLine", "multiLineWithIcon"
 		])
 	}
 }
 
 def installed() {
 	sendEvent(name: "switch", value: "off")
+	sendEvent(name: "multiLine", value: "Line 1\nLine 2\nLine 3")
 }
 
 def parse(String description) {

devicetypes/smartthings/tile-ux/tile-basic-value.src/tile-basic-value.groovy

@@ -69,16 +69,25 @@ metadata {
 			]
 		}
 
-		valueTile("noValue", "device.nada", width: 2, height: 2) {
+		valueTile("noValue", "device.nada", width: 4, height: 2) {
 			state "default", label:'${currentValue}'
 		}
 
+		valueTile("multiLine", "device.multiLine", width: 3, height: 2) {
+			state "default", label: '${currentValue}'
+		}
+
+		valueTile("multiLineWithIcon", "device.multiLine", width: 3, height: 2) {
+			state "default", label: '${currentValue}', icon: "st.switches.switch.off"
+		}
+
 		main("text")
 		details([
 			"text", "longText", "integer", 
             "integerFloat", "pi", "floatAsText",
             "bgColor", "bgColorRange", "bgColorRangeSingleItem",
-            "bgColorRangeConflict", "noValue"
+            "bgColorRangeConflict", "noValue",
+            "multiLine", "multiLineWithIcon"
 		])
 	}
 }
@@ -90,6 +99,7 @@ def installed() {
 	sendEvent(name: "integerFloat", value: 47.0)
 	sendEvent(name: "pi", value: 3.14159)
 	sendEvent(name: "floatAsText", value: "3.14159")
+	sendEvent(name: "multiLine", value: "Line 1\nLine 2\nLine 3")
 }
 
 def parse(String description) {

devicetypes/smartthings/tile-ux/tile-multiattribute-generic.src/tile-multiattribute-generic.groovy

@@ -67,17 +67,50 @@ metadata {
 				attributeState "VALUE_DOWN", action: "levelDown"
 			}
 		}
+		multiAttributeTile(name:"lengthyTile", type:"generic", width:6, height:4) {
+			tileAttribute("device.lengthyText", key: "PRIMARY_CONTROL") {
+				attributeState "default", label:'The value of this tile is long and should wrap to two lines', backgroundColor:"#79b821"
+			}
+			tileAttribute("device.lengthyText", key: "SECONDARY_CONTROL") {
+				attributeState "default", label:'The value of this tile is long and should wrap to two lines', backgroundColor:"#79b821"
+			}
+		}
+		multiAttributeTile(name:"multilineTile", type:"generic", width:6, height:4) {
+			tileAttribute("device.multilineText", key: "PRIMARY_CONTROL") {
+				attributeState "default", label:'Line 1 YES\nLine 2 YES\nLine 3 NO', backgroundColor:"#79b821"
+			}
+			tileAttribute("device.multilineText", key: "SECONDARY_CONTROL") {
+				attributeState "default", label:'Line 1 YES\nLine 2 YES\nLine 3 NO', backgroundColor:"#79b821"
+			}
+		}
+		multiAttributeTile(name:"lengthyTileWithIcon", type:"generic", width:6, height:4) {
+			tileAttribute("device.lengthyText", key: "PRIMARY_CONTROL") {
+				attributeState "default", label:'The value of this tile is long and should wrap to two lines', backgroundColor:"#79b821", icon: "st.switches.switch.on"
+			}
+			tileAttribute("device.lengthyText", key: "SECONDARY_CONTROL") {
+				attributeState "default", label:'The value of this tile is long and should wrap to two lines', backgroundColor:"#79b821", icon: "st.switches.switch.on"
+			}
+		}
+		multiAttributeTile(name:"multilineTileWithIcon", type:"generic", width:6, height:4) {
+			tileAttribute("device.multilineText", key: "PRIMARY_CONTROL") {
+				attributeState "default", label:'Line 1 YES\nLine 2 YES\nLine 3 NO', backgroundColor:"#79b821", icon: "st.switches.switch.on"
+			}
+			tileAttribute("device.multilineText", key: "SECONDARY_CONTROL") {
+				attributeState "default", label:'Line 1 YES\nLine 2 YES\nLine 3 NO', backgroundColor:"#79b821", icon: "st.switches.switch.on"
+			}
+		}
 
 		main(["basicTile"])
-		details(["basicTile", "sliderTile", "valueTile"])
+		details(["basicTile", "sliderTile", "valueTile", "lengthyTile", "multilineTile", "lengthyTileWithIcon", "multilineTileWithIcon"])
 	}
 }
 
 def installed() {
-
+	sendEvent(name: "lengthyText", value: "The value of this tile is long and should wrap to two lines")
+	sendEvent(name: "multilineText", value: "Line 1 YES\nLine 2 YES\nLine 3 NO")
 }
 
-def parse() {
+def parse(String description) {
 	// This is a simulated device. No incoming data to parse.
 }
 

devicetypes/smartthings/zigbee-hue-bulb.src/zigbee-hue-bulb.groovy

@@ -11,6 +11,9 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
+
+//@Deprecated - Moved to zll-rgbw-bulb
+
 /* Philips Hue (via Zigbee)
 
 Capabilities:
@@ -22,10 +25,10 @@ Capabilities:
   Sensor
   Switch
   Switch Level
-  
+
 Custom Commands:
   setAdjustedColor
-    
+
 */
 
 metadata {
@@ -41,7 +44,7 @@ metadata {
 
 		command "setAdjustedColor"
 
-		fingerprint profileId: "C05E", inClusters: "0000,0003,0004,0005,0006,0008,0300,1000", outClusters: "0019"
+		//fingerprint profileId: "C05E", inClusters: "0000,0003,0004,0005,0006,0008,0300,1000", outClusters: "0019"
 	}
 
 	// simulator metadata

devicetypes/smartthings/zll-dimmer-bulb.src/zll-dimmer-bulb.groovy

@@ -0,0 +1,102 @@
+/**
+ *  Copyright 2016 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+
+metadata {
+    definition (name: "ZLL Dimmer Bulb", namespace: "smartthings", author: "SmartThings") {
+
+        capability "Actuator"
+        capability "Configuration"
+        capability "Polling"
+        capability "Refresh"
+        capability "Switch"
+        capability "Switch Level"
+
+        //fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 1000", outClusters: "0000,0019"
+        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 1000", outClusters: "0019"
+        //fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 1000", outClusters: "0000,0019", manufacturer: "CREE", model: "Connected A-19 60W Equivalent", deviceJoinName: "Cree Connected Bulb"
+        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 1000, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Classic A60 W clear", deviceJoinName: "OSRAM LIGHTIFY LED Smart Connected Light"
+        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 1000, 0B04, FC0F", outClusters: "0019", manufacturer: "OSRAM", model: "Classic A60 W clear - LIGHTIFY", deviceJoinName: "OSRAM LIGHTIFY LED Smart Connected Light"
+        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 1000", outClusters: "0019", manufacturer: "Philips", model: "LWB006", deviceJoinName: "Philips Hue White"
+    }
+
+    // simulator metadata
+    simulator {
+        // status messages
+        status "on": "on/off: 1"
+        status "off": "on/off: 0"
+
+        // reply messages
+        reply "zcl on-off on": "on/off: 1"
+        reply "zcl on-off off": "on/off: 0"
+    }
+
+    // UI tile definitions
+    tiles(scale: 2) {
+        multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+                attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
+                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
+            }
+            tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+                attributeState "level", action:"switch level.setLevel"
+            }
+        }
+        standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+        }
+        main "switch"
+        details(["switch", "refresh"])
+    }
+}
+
+// Parse incoming device messages to generate events
+def parse(String description) {
+    log.debug "description is $description"
+
+    def resultMap = zigbee.getEvent(description)
+    if (resultMap) {
+        sendEvent(resultMap)
+    }
+    else {
+        log.debug "DID NOT PARSE MESSAGE for description : $description"
+        log.debug zigbee.parseDescriptionAsMap(description)
+    }
+}
+
+def off() {
+    zigbee.off() + ["delay 1500"] + zigbee.onOffRefresh()
+}
+
+def on() {
+    zigbee.on() + ["delay 1500"] + zigbee.onOffRefresh()
+}
+
+def setLevel(value) {
+    zigbee.setLevel(value) + ["delay 1500"] + zigbee.levelRefresh()         //adding refresh because of ZLL bulb not conforming to send-me-a-report
+}
+
+def refresh() {
+    zigbee.onOffRefresh() + zigbee.levelRefresh()
+}
+
+def poll() {
+    refresh()
+}
+
+def configure() {
+    log.debug "Configuring Reporting and Bindings."
+    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
+}

devicetypes/smartthings/zll-rgbw-bulb.src/zll-rgbw-bulb.groovy

@@ -0,0 +1,150 @@
+/**
+ *  Copyright 2016 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+
+metadata {
+    definition (name: "ZLL RGBW Bulb", namespace: "smartthings", author: "SmartThings") {
+
+        capability "Actuator"
+        capability "Color Control"
+        capability "Color Temperature"
+        capability "Configuration"
+        capability "Polling"
+        capability "Refresh"
+        capability "Switch"
+        capability "Switch Level"
+
+        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300", outClusters: "0019"
+        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 1000", outClusters: "0019"
+        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 1000", outClusters: "0019", "manufacturer":"OSRAM", "model":"Classic A60 RGBW", deviceJoinName: "OSRAM LIGHTIFY LED Classic A60 RGBW"
+    }
+
+    // UI tile definitions
+    tiles(scale: 2) {
+        multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+                attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+            }
+            tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+                attributeState "level", action:"switch level.setLevel"
+            }
+            tileAttribute ("device.color", key: "COLOR_CONTROL") {
+                attributeState "color", action:"color control.setColor"
+            }
+        }
+        controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2700..6500)") {
+            state "colorTemperature", action:"color temperature.setColorTemperature"
+        }
+        valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "colorTemperature", label: '${currentValue} K'
+        }
+        standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+        }
+
+        main(["switch"])
+        details(["switch", "colorTempSliderControl", "colorTemp", "refresh"])
+    }
+}
+
+//Globals
+private getATTRIBUTE_HUE() { 0x0000 }
+private getATTRIBUTE_SATURATION() { 0x0001 }
+private getHUE_COMMAND() { 0x00 }
+private getSATURATION_COMMAND() { 0x03 }
+private getCOLOR_CONTROL_CLUSTER() { 0x0300 }
+private getATTRIBUTE_COLOR_TEMPERATURE() { 0x0007 }
+
+// Parse incoming device messages to generate events
+def parse(String description) {
+    log.debug "description is $description"
+
+    def finalResult = zigbee.getEvent(description)
+    if (finalResult) {
+        log.debug finalResult
+        sendEvent(finalResult)
+    }
+    else {
+        def zigbeeMap = zigbee.parseDescriptionAsMap(description)
+        log.trace "zigbeeMap : $zigbeeMap"
+
+        if (zigbeeMap?.clusterInt == COLOR_CONTROL_CLUSTER) {
+            if(zigbeeMap.attrInt == ATTRIBUTE_HUE){  //Hue Attribute
+                def hueValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 360)
+                sendEvent(name: "hue", value: hueValue, displayed:false)
+            }
+            else if(zigbeeMap.attrInt == ATTRIBUTE_SATURATION){ //Saturation Attribute
+                def saturationValue = Math.round(zigbee.convertHexToInt(zigbeeMap.value) / 255 * 100)
+                sendEvent(name: "saturation", value: saturationValue, displayed:false)
+            }
+        }
+        else {
+            log.info "DID NOT PARSE MESSAGE for description : $description"
+        }
+    }
+}
+
+def on() {
+    zigbee.on() + ["delay 1500"] + zigbee.onOffRefresh()
+}
+
+def off() {
+    zigbee.off() + ["delay 1500"] + zigbee.onOffRefresh()
+}
+
+def refresh() {
+    refreshAttributes() + configureAttributes()
+}
+
+def poll() {
+    refreshAttributes()
+}
+
+def configure() {
+    log.debug "Configuring Reporting and Bindings."
+    configureAttributes() + refreshAttributes()
+}
+
+def configureAttributes() {
+    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01)
+}
+
+def refreshAttributes() {
+    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh() + zigbee.readAttribute(0x0300, 0x00) + zigbee.readAttribute(0x0300, ATTRIBUTE_HUE) + zigbee.readAttribute(0x0300, ATTRIBUTE_SATURATION)
+}
+
+def setColorTemperature(value) {
+    zigbee.setColorTemperature(value) + ["delay 1500"] + zigbee.colorTemperatureRefresh()
+}
+
+def setLevel(value) {
+    zigbee.setLevel(value) + ["delay 1500"] + zigbee.levelRefresh()         //adding refresh because of ZLL bulb not conforming to send-me-a-report
+}
+
+def setColor(value){
+    log.trace "setColor($value)"
+    zigbee.on() + setHue(value.hue) + ["delay 300"] + setSaturation(value.saturation) + ["delay 2000"] + refreshAttributes()
+}
+
+def setHue(value) {
+    def scaledHueValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+    zigbee.command(COLOR_CONTROL_CLUSTER, HUE_COMMAND, scaledHueValue, "00", "0500")       //payload-> hue value, direction (00-> shortest distance), transition time (1/10th second) (0500 in U16 reads 5)
+}
+
+def setSaturation(value) {
+    def scaledSatValue = zigbee.convertToHexString(Math.round(value * 0xfe / 100.0), 2)
+    zigbee.command(COLOR_CONTROL_CLUSTER, SATURATION_COMMAND, scaledSatValue, "0500")      //payload-> sat value, transition time
+}

devicetypes/smartthings/zll-white-color-temperature-bulb.src/zll-white-color-temperature-bulb.groovy

@@ -0,0 +1,124 @@
+/**
+ *  Copyright 2016 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+
+metadata {
+    definition (name: "ZLL White Color Temperature Bulb", namespace: "smartthings", author: "SmartThings") {
+
+        capability "Actuator"
+        capability "Color Temperature"
+        capability "Configuration"
+        capability "Polling"
+        capability "Refresh"
+        capability "Switch"
+        capability "Switch Level"
+
+        attribute "colorName", "string"
+        command "setGenericName"
+
+        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 1000, 0B04, FC0F", outClusters: "0019", "manufacturer":"OSRAM", "model":"Classic A60 TW", deviceJoinName: "OSRAM LIGHTIFY LED Classic A60 Tunable White"
+        fingerprint profileId: "C05E", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0300, 1000, FC0F", outClusters: "0019", "manufacturer":"OSRAM", "model":"PAR16 50 TW", deviceJoinName: "OSRAM LIGHTIFY LED PAR16 50 Tunable White"
+    }
+
+    // UI tile definitions
+    tiles(scale: 2) {
+        multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+                attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
+                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
+            }
+            tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+                attributeState "level", action:"switch level.setLevel"
+            }
+            tileAttribute ("colorName", key: "SECONDARY_CONTROL") {
+                attributeState "colorName", label:'${currentValue}'
+            }
+        }
+
+        standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+        }
+
+        controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2700..6500)") {
+            state "colorTemperature", action:"color temperature.setColorTemperature"
+        }
+        valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "colorTemperature", label: '${currentValue} K'
+        }
+
+        main(["switch"])
+        details(["switch", "colorTempSliderControl", "colorTemp", "refresh"])
+    }
+}
+
+// Parse incoming device messages to generate events
+def parse(String description) {
+    log.debug "description is $description"
+    def event = zigbee.getEvent(description)
+    if (event) {
+        sendEvent(event)
+    }
+    else {
+        log.warn "DID NOT PARSE MESSAGE for description : $description"
+        log.debug zigbee.parseDescriptionAsMap(description)
+    }
+}
+
+def off() {
+    zigbee.off() + ["delay 1500"] + zigbee.onOffRefresh()
+}
+
+def on() {
+    zigbee.on() + ["delay 1500"] + zigbee.onOffRefresh()
+}
+
+def setLevel(value) {
+    zigbee.setLevel(value) + ["delay 1500"] + zigbee.levelRefresh()
+}
+
+def refresh() {
+    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh() + zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig()
+}
+
+def poll() {
+    zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
+}
+
+def configure() {
+    log.debug "Configuring Reporting and Bindings."
+    zigbee.onOffConfig() + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
+}
+
+def setColorTemperature(value) {
+    setGenericName(value)
+    zigbee.setColorTemperature(value) + ["delay 1500"] + zigbee.colorTemperatureRefresh()
+}
+
+//Naming based on the wiki article here: http://en.wikipedia.org/wiki/Color_temperature
+def setGenericName(value){
+    if (value != null) {
+        def genericName = ""
+        if (value < 3300) {
+            genericName = "Soft White"
+        } else if (value < 4150) {
+            genericName = "Moonlight"
+        } else if (value <= 5000) {
+            genericName = "Cool White"
+        } else {
+            genericName = "Daylight"
+        }
+        sendEvent(name: "colorName", value: genericName)
+    }
+}

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -332,8 +332,7 @@ private addChildBulb(dni, hueType, name, hub, update=false, device = null) {
 
 	if (deviceType) {
 		return addChildDevice("smartthings", deviceType, dni, hub, ["label": name])
-	}
+	} else {
-	else {
 		log.warn "Device type $hueType not supported"
 		return null
 	}
@@ -349,8 +348,10 @@ def addBulbs() {
 				newHueBulb = bulbs.find { (app.id + "/" + it.value.id) == dni }
                 if (newHueBulb != null) {
                     d = addChildBulb(dni, newHueBulb?.value?.type, newHueBulb?.value?.name, newHueBulb?.value?.hub)
-                    log.debug "created ${d.displayName} with id $dni"
+					if (d) {
-                    d.refresh()
+						log.debug "created ${d.displayName} with id $dni"
+						d.refresh()
+					}
                 } else {
                 	log.debug "$dni in not longer paired to the Hue Bridge or ID changed"
                 }
@@ -358,7 +359,7 @@ def addBulbs() {
             	//backwards compatable
 				newHueBulb = bulbs.find { (app.id + "/" + it.id) == dni }
 				d = addChildBulb(dni, "Extended Color Light", newHueBulb?.value?.name, newHueBulb?.value?.hub)
-                d.refresh()
+				d?.refresh()
 			}
 		} else {
 			log.debug "found ${d.displayName} with id $dni already exists, type: '$d.typeName'"
@@ -824,7 +825,7 @@ def setColor(childDevice, huesettings) {
             value.bri = Math.min(Math.round(huesettings.level * 255 / 100), 255)
     }
     value.alert = huesettings.alert ? huesettings.alert : "none"
-    value.transition = huesettings.transition ? huesettings.transition : 4
+    value.transitiontime = huesettings.transitiontime ? huesettings.transitiontime : 4
 
     // Make sure to turn off light if requested
     if (huesettings.switch == "off")

smartapps/smartthings/ifttt.src/ifttt.groovy

@@ -131,19 +131,69 @@ def update() {
 	def type = params.deviceType
 	def data = request.JSON
 	def devices = settings[type]
+	def device = settings[type]?.find { it.id == params.id }
 	def command = data.command
 
 	log.debug "[PROD] update, params: ${params}, request: ${data}, devices: ${devices*.id}"
-	if (command) {
+	
-		def device = devices?.find { it.id == params.id }
+	if (!device) {
-		if (!device) {
+		httpError(404, "Device not found")
-			httpError(404, "Device not found")
+	} 
-		} else {
+	
-			device."$command"()
+	if (validateCommand(device, type, command)) {
-		}
+		device."$command"()
+	} else {
+		httpError(403, "Access denied. This command is not supported by current capability.")
 	}
 }
 
+/**
+ * Validating the command passed by the user based on capability.
+ * @return boolean
+ */
+def validateCommand(device, deviceType, command) {
+	def capabilityCommands = getDeviceCapabilityCommands(device.capabilities)
+	def currentDeviceCapability = getCapabilityName(deviceType)
+	if (capabilityCommands[currentDeviceCapability]) {
+		return command in capabilityCommands[currentDeviceCapability] ? true : false
+	} else {
+		// Handling other device types here, which don't accept commands
+		httpError(400, "Bad request.")
+	}
+}
+
+/**
+ * Need to get the attribute name to do the lookup. Only
+ * doing it for the device types which accept commands
+ * @return attribute name of the device type
+ */
+def getCapabilityName(type) {
+    switch(type) {
+		case "switches":
+			return "Switch"
+		case "alarms":
+			return "Alarm"
+		case "locks":
+			return "Lock"
+		default:
+			return type
+	}
+}
+
+/**
+ * Constructing the map over here of
+ * supported commands by device capability
+ * @return a map of device capability -> supported commands
+ */
+def getDeviceCapabilityCommands(deviceCapabilities) {
+	def map = [:]
+	deviceCapabilities.collect {
+		map[it.name] = it.commands.collect{ it.name.toString() }
+	}
+	return map
+}
+
+
 def show() {
 	def type = params.deviceType
 	def devices = settings[type]

smartapps/smartthings/wemo-connect.src/wemo-connect.groovy

@@ -236,23 +236,22 @@ def addSwitches() {
 			d = getChildDevices()?.find {
 				it.deviceNetworkId == selectedSwitch.value.mac || it.device.getDataValue("mac") == selectedSwitch.value.mac
 			}
-		}
+			if (!d) {
-
+				log.debug "Creating WeMo Switch with dni: ${selectedSwitch.value.mac}"
-		if (!d) {
+				d = addChildDevice("smartthings", "Wemo Switch", selectedSwitch.value.mac, selectedSwitch?.value.hub, [
-			log.debug "Creating WeMo Switch with dni: ${selectedSwitch.value.mac}"
+					"label": selectedSwitch?.value?.name ?: "Wemo Switch",
-			d = addChildDevice("smartthings", "Wemo Switch", selectedSwitch.value.mac, selectedSwitch?.value.hub, [
+					"data": [
-				"label": selectedSwitch?.value?.name ?: "Wemo Switch",
+						"mac": selectedSwitch.value.mac,
-				"data": [
+						"ip": selectedSwitch.value.ip,
-					"mac": selectedSwitch.value.mac,
+						"port": selectedSwitch.value.port
-					"ip": selectedSwitch.value.ip,
+					]
-					"port": selectedSwitch.value.port
+				])
-				]
+				def ipvalue = convertHexToIP(selectedSwitch.value.ip)
-			])
+				d.sendEvent(name: "currentIP", value: ipvalue, descriptionText: "IP is ${ipvalue}")
-			def ipvalue = convertHexToIP(selectedSwitch.value.ip)
+				log.debug "Created ${d.displayName} with id: ${d.id}, dni: ${d.deviceNetworkId}"
-			d.sendEvent(name: "currentIP", value: ipvalue, descriptionText: "IP is ${ipvalue}")
+			} else {
-			log.debug "Created ${d.displayName} with id: ${d.id}, dni: ${d.deviceNetworkId}"
+				log.debug "found ${d.displayName} with id $dni already exists"
-		} else {
+			}
-			log.debug "found ${d.displayName} with id $dni already exists"
 		}
 	}
 }
@@ -267,23 +266,22 @@ def addMotions() {
 			d = getChildDevices()?.find {
 				it.deviceNetworkId == selectedMotion.value.mac || it.device.getDataValue("mac") == selectedMotion.value.mac
 			}
-		}
+			if (!d) {
-
+				log.debug "Creating WeMo Motion with dni: ${selectedMotion.value.mac}"
-		if (!d) {
+				d = addChildDevice("smartthings", "Wemo Motion", selectedMotion.value.mac, selectedMotion?.value.hub, [
-			log.debug "Creating WeMo Motion with dni: ${selectedMotion.value.mac}"
+					"label": selectedMotion?.value?.name ?: "Wemo Motion",
-			d = addChildDevice("smartthings", "Wemo Motion", selectedMotion.value.mac, selectedMotion?.value.hub, [
+					"data": [
-				"label": selectedMotion?.value?.name ?: "Wemo Motion",
+						"mac": selectedMotion.value.mac,
-				"data": [
+						"ip": selectedMotion.value.ip,
-					"mac": selectedMotion.value.mac,
+						"port": selectedMotion.value.port
-					"ip": selectedMotion.value.ip,
+					]
-					"port": selectedMotion.value.port
+				])
-				]
+				def ipvalue = convertHexToIP(selectedMotion.value.ip)
-			])
+				d.sendEvent(name: "currentIP", value: ipvalue, descriptionText: "IP is ${ipvalue}")
-			def ipvalue = convertHexToIP(selectedMotion.value.ip)
+				log.debug "Created ${d.displayName} with id: ${d.id}, dni: ${d.deviceNetworkId}"
-			d.sendEvent(name: "currentIP", value: ipvalue, descriptionText: "IP is ${ipvalue}")
+			} else {
-			log.debug "Created ${d.displayName} with id: ${d.id}, dni: ${d.deviceNetworkId}"
+				log.debug "found ${d.displayName} with id $dni already exists"
-		} else {
+			}
-			log.debug "found ${d.displayName} with id $dni already exists"
 		}
 	}
 }
@@ -298,23 +296,22 @@ def addLightSwitches() {
 			d = getChildDevices()?.find {
 				it.deviceNetworkId == selectedLightSwitch.value.mac || it.device.getDataValue("mac") == selectedLightSwitch.value.mac
 			}
-		}
+			if (!d) {
-
+				log.debug "Creating WeMo Light Switch with dni: ${selectedLightSwitch.value.mac}"
-		if (!d) {
+				d = addChildDevice("smartthings", "Wemo Light Switch", selectedLightSwitch.value.mac, selectedLightSwitch?.value.hub, [
-			log.debug "Creating WeMo Light Switch with dni: ${selectedLightSwitch.value.mac}"
+					"label": selectedLightSwitch?.value?.name ?: "Wemo Light Switch",
-			d = addChildDevice("smartthings", "Wemo Light Switch", selectedLightSwitch.value.mac, selectedLightSwitch?.value.hub, [
+					"data": [
-				"label": selectedLightSwitch?.value?.name ?: "Wemo Light Switch",
+						"mac": selectedLightSwitch.value.mac,
-				"data": [
+						"ip": selectedLightSwitch.value.ip,
-					"mac": selectedLightSwitch.value.mac,
+						"port": selectedLightSwitch.value.port
-					"ip": selectedLightSwitch.value.ip,
+					]
-					"port": selectedLightSwitch.value.port
+				])
-				]
+				def ipvalue = convertHexToIP(selectedLightSwitch.value.ip)
-			])
+				d.sendEvent(name: "currentIP", value: ipvalue, descriptionText: "IP is ${ipvalue}")
-			def ipvalue = convertHexToIP(selectedLightSwitch.value.ip)
+				log.debug "created ${d.displayName} with id $dni"
-			d.sendEvent(name: "currentIP", value: ipvalue, descriptionText: "IP is ${ipvalue}")
+			} else {
-			log.debug "created ${d.displayName} with id $dni"
+				log.debug "found ${d.displayName} with id $dni already exists"
-		} else {
+			}
-			log.debug "found ${d.displayName} with id $dni already exists"
 		}
 	}
 }

smartapps/tslagle13/vacation-lighting-director.src/vacation-lighting-director.groovy

@@ -273,7 +273,7 @@ def scheduleCheck(evt) {
     else {
     	if(people){
         	//don't turn off lights if anyone is home
-        	if(someoneIsHome()){
+        	if(someoneIsHome){
         	    log.debug("Stopping Check for Light")
         	    unschedule()
         	}