MSA-1391: This app takes the events from a switch and uses them to toggle multiple outlets or other switches. The idea is to be able to leverage a physical switch to control multiple outlets to enable a whole room to turn on at the touch of a switch.

Rolling down staging hotfix to master

smartapps/mdvickst/use-switch-to-control-outlets.src/use-switch-to-control-outlets.groovy

@@ -0,0 +1,61 @@
+/**
+ *  Use Switch to Control Outlets
+ *
+ *  Copyright 2016 Mark Vickstrom
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+definition(
+    name: "Use Switch to Control Outlets",
+    namespace: "mdvickst",
+    author: "Mark Vickstrom",
+    description: "Use a Switch to control multiple outlets",
+    category: "Convenience",
+    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
+    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png")
+
+
+preferences {
+	section("Use this Switch") {
+		input "triggerSwitch", "capability.switch", title: "Which Switch?", required: true
+	}
+    section("To Control these Devices") {
+    	input "switchesToControl", "capability.switch", title: "Which Outlets/Switches?", multiple: true, required: true
+    }
+}
+
+def installed() {
+	log.debug "Installed with settings: ${settings}"
+
+	initialize()
+}
+
+def updated() {
+	log.debug "Updated with settings: ${settings}"
+
+	unsubscribe()
+	initialize()
+}
+
+def initialize() {
+	subscribe(triggerSwitch, "switch", triggerSwitchPressed)
+}
+
+def triggerSwitchPressed(evt){
+    if (evt.value == "on") {
+        log.debug "swtich pressed On"
+        switchesToControl?.on()
+    } else if (evt.value == "off") {
+        log.debug "swtich pressed Off"
+        switchesToControl?.off()
+    }
+}

smartapps/smartthings/gentle-wake-up.src/gentle-wake-up.groovy

@@ -39,6 +39,7 @@ preferences {
 	page(name: "completionPage")
 	page(name: "numbersPage")
 	page(name: "controllerExplanationPage")
+	page(name: "unsupportedDevicesPage")
 }
 
 def rootPage() {
@@ -47,6 +48,9 @@ def rootPage() {
 		section("What to dim") {
 			input(name: "dimmers", type: "capability.switchLevel", title: "Dimmers", description: null, multiple: true, required: true, submitOnChange: true)
 			if (dimmers) {
+				if (dimmersContainUnsupportedDevices()) {
+					href(name: "toUnsupportedDevicesPage", page: "unsupportedDevicesPage", title: "Some of your selected dimmers don't seem to be supported", description: "Tap here to fix it", required: true)
+				}
 				href(name: "toNumbersPage", page: "numbersPage", title: "Duration & Direction", description: numbersPageHrefDescription(), state: "complete")
 			}
 		}
@@ -71,6 +75,31 @@ def rootPage() {
 	}
 }
 
+def unsupportedDevicesPage() {
+
+	def unsupportedDimmers = dimmers.findAll { !hasSetLevelCommand(it) }
+
+	dynamicPage(name: "unsupportedDevicesPage") {
+		if (unsupportedDimmers) {
+			section("These devices do not support the setLevel command") {
+				unsupportedDimmers.each {
+					paragraph deviceLabel(it)
+				}
+			}
+			section {
+				input(name: "dimmers", type: "capability.sensor", title: "Please remove the above devices from this list.", submitOnChange: true, multiple: true)
+			}
+			section {
+				paragraph "If you think there is a mistake here, please contact support."
+			}
+		} else {
+			section {
+				paragraph "You're all set. You can hit the back button, now. Thanks for cleaning up your settings :)"
+			}
+		}
+	}
+}
+
 def controllerExplanationPage() {
 	dynamicPage(name: "controllerExplanationPage", title: "How To Control Gentle Wake Up") {
 
@@ -528,14 +557,16 @@ def updateDimmers(percentComplete) {
 		} else {
 
 			def shouldChangeColors = (colorize && colorize != "false")
-			def canChangeColors = hasSetColorCommand(dimmer)
 
-			log.debug "Setting ${deviceLabel(dimmer)} to ${nextLevel}"
+			if (shouldChangeColors && hasSetColorCommand(dimmer)) {
-
+				def hue = getHue(dimmer, nextLevel)
-			if (shouldChangeColors && canChangeColors) {
+				log.debug "Setting ${deviceLabel(dimmer)} level to ${nextLevel} and hue to ${hue}"
-				dimmer.setColor([hue: getHue(dimmer, nextLevel), saturation: 100, level: nextLevel])
+				dimmer.setColor([hue: hue, saturation: 100, level: nextLevel])
-			} else {
+			} else if (hasSetLevelCommand(dimmer)) {
+				log.debug "Setting ${deviceLabel(dimmer)} level to ${nextLevel}"
 				dimmer.setLevel(nextLevel)
+			} else {
+				log.warn "${deviceLabel(dimmer)} does not have setColor or setLevel commands."
 			}
 
 		}
@@ -817,24 +848,21 @@ private getRedHue(level) {
 	if (level >= 96) return 17
 }
 
+private dimmersContainUnsupportedDevices() {
+	def found = dimmers.find { hasSetLevelCommand(it) == false }
+	return found != null
+}
+
 private hasSetLevelCommand(device) {
-	def isDimmer = false
+	return hasCommand(device, "setLevel")
-	device.supportedCommands.each {
-		if (it.name.contains("setLevel")) {
-			isDimmer = true
-		}
-	}
-	return isDimmer
 }
 
 private hasSetColorCommand(device) {
-	def hasColor = false
+	return hasCommand(device, "setColor")
-	device.supportedCommands.each {
+}
-		if (it.name.contains("setColor")) {
+
-			hasColor = true
+private hasCommand(device, String command) {
-		}
+	return (device.supportedCommands.find { it.name == command } != null)
-	}
-	return hasColor
 }
 
 private dimmersWithSetColorCommand() {
@@ -1073,4 +1101,4 @@ def hasStartLevel() {
 
 def hasEndLevel() {
 	return (endLevel != null && endLevel != "")
-}
+}

smartapps/smartthings/logitech-harmony-connect.src/logitech-harmony-connect.groovy

@@ -823,8 +823,8 @@ def deviceHandler(evt) {
 }
 
 def sendToHarmony(evt, String callbackUrl) {
-	def callback = new URI(callbackUrl)
+  def callback = new URI(callbackUrl)
-  if(isIP(callback.host)){
+  if (callback.port != -1) {
   	def host = callback.port != -1 ? "${callback.host}:${callback.port}" : callback.host
   	def path = callback.query ? "${callback.path}?${callback.query}".toString() : callback.path
   	sendHubCommand(new physicalgraph.device.HubAction(
@@ -852,25 +852,6 @@ def sendToHarmony(evt, String callbackUrl) {
   }
 }
 
-public static boolean isIP(String str) {
-    try {
-         String[] parts = str.split("\\.");
-         if (parts.length != 4) return false;
-         for (int i = 0; i < 4; ++i) {
-             int p
-             try {
-               p = Integer.parseInt(parts[i]);
-             } catch (Exception e) {
-               return false;
-             }
-             if (p > 255 || p < 0) return false;
-         }
-         return true;
-    } catch (Exception e) {
-        return false;
-    }
-}
-
 def listHubs() {
 	location.hubs?.findAll { it.type.toString() == "PHYSICAL" }?.collect { hubItem(it) }
 }