Merge pull request #1229 from SmartThingsCommunity/staging

Rolling down hotfix to master

devicetypes/dianoga/netatmo-additional-module.src/netatmo-additional-module.groovy

@@ -15,6 +15,7 @@
  */
 metadata {
 	definition (name: "Netatmo Additional Module", namespace: "dianoga", author: "Brian Steere") {
+		capability "Sensor"
 		capability "Relative Humidity Measurement"
 		capability "Temperature Measurement"
 

devicetypes/dianoga/netatmo-basestation.src/netatmo-basestation.groovy

@@ -15,6 +15,7 @@
  */
 metadata {
 	definition (name: "Netatmo Basestation", namespace: "dianoga", author: "Brian Steere") {
+		capability "Sensor"
 		capability "Relative Humidity Measurement"
 		capability "Temperature Measurement"
 

devicetypes/dianoga/netatmo-outdoor-module.src/netatmo-outdoor-module.groovy

@@ -15,6 +15,7 @@
  */
 metadata {
 	definition (name: "Netatmo Outdoor Module", namespace: "dianoga", author: "Brian Steere") {
+		capability "Sensor"
 		capability "Relative Humidity Measurement"
 		capability "Temperature Measurement"
 	}

devicetypes/dianoga/netatmo-rain.src/netatmo-rain.groovy

@@ -15,6 +15,8 @@
  */
 metadata {
 	definition (name: "Netatmo Rain", namespace: "dianoga", author: "Brian Steere") {
+		capability "Sensor"
+	
 		attribute "rain", "number"
         attribute "rainSumHour", "number"
         attribute "rainSumDay", "number"

devicetypes/smartthings/ecobee-sensor.src/ecobee-sensor.groovy

@@ -67,6 +67,6 @@ def refresh() {
 
 void poll() {
 	log.debug "Executing 'poll' using parent SmartApp"
-	parent.pollChild()
+	parent.poll()
 
 }

devicetypes/smartthings/ecobee-thermostat.src/ecobee-thermostat.groovy

@@ -133,7 +133,7 @@ def refresh() {
 
 void poll() {
 	log.debug "Executing 'poll' using parent SmartApp"
-	parent.pollChild()
+	parent.poll()
 }
 
 def generateEvent(Map results) {
@@ -152,11 +152,11 @@ def generateEvent(Map results) {
 				sendValue =  location.temperatureScale == "C"? roundC(sendValue) : sendValue
 				isChange = isTemperatureStateChange(device, name, value.toString())
 				isDisplayed = isChange
-				event << [value: sendValue, isStateChange: isChange, displayed: isDisplayed]
+				event << [value: sendValue, unit: temperatureScale, isStateChange: isChange, displayed: isDisplayed]
 			}  else if (name=="maxCoolingSetpoint" || name=="minCoolingSetpoint" || name=="maxHeatingSetpoint" || name=="minHeatingSetpoint") {
 				def sendValue = convertTemperatureIfNeeded(value.toDouble(), "F", 1) //API return temperature value in F
 				sendValue =  location.temperatureScale == "C"? roundC(sendValue) : sendValue
-				event << [value: sendValue, displayed: false]
+				event << [value: sendValue, unit: temperatureScale, displayed: false]
 			}  else if (name=="heatMode" || name=="coolMode" || name=="autoMode" || name=="auxHeatMode"){
 				isChange = isStateChange(device, name, value.toString())
 				event << [value: value.toString(), isStateChange: isChange, displayed: false]
@@ -234,9 +234,9 @@ void setHeatingSetpoint(setpoint) {
 	def heatingValue = location.temperatureScale == "C"? convertCtoF(heatingSetpoint) : heatingSetpoint
 
 	def sendHoldType = holdType ? (holdType=="Temporary")? "nextTransition" : (holdType=="Permanent")? "indefinite" : "indefinite" : "indefinite"
-	if (parent.setHold(this, heatingValue, coolingValue, deviceId, sendHoldType)) {
+	if (parent.setHold(heatingValue, coolingValue, deviceId, sendHoldType)) {
-		sendEvent("name":"heatingSetpoint", "value":heatingSetpoint)
+		sendEvent("name":"heatingSetpoint", "value":heatingSetpoint, "unit":location.temperatureScale)
-		sendEvent("name":"coolingSetpoint", "value":coolingSetpoint)
+		sendEvent("name":"coolingSetpoint", "value":coolingSetpoint, "unit":location.temperatureScale)
 		log.debug "Done setHeatingSetpoint> coolingSetpoint: ${coolingSetpoint}, heatingSetpoint: ${heatingSetpoint}"
 		generateSetpointEvent()
 		generateStatusEvent()
@@ -271,9 +271,9 @@ void setCoolingSetpoint(setpoint) {
 	def heatingValue = location.temperatureScale == "C"? convertCtoF(heatingSetpoint) : heatingSetpoint
 
 	def sendHoldType = holdType ? (holdType=="Temporary")? "nextTransition" : (holdType=="Permanent")? "indefinite" : "indefinite" : "indefinite"
-	if (parent.setHold(this, heatingValue, coolingValue, deviceId, sendHoldType)) {
+	if (parent.setHold(heatingValue, coolingValue, deviceId, sendHoldType)) {
-		sendEvent("name":"heatingSetpoint", "value":heatingSetpoint)
+		sendEvent("name":"heatingSetpoint", "value":heatingSetpoint, "unit":location.temperatureScale)
-		sendEvent("name":"coolingSetpoint", "value":coolingSetpoint)
+		sendEvent("name":"coolingSetpoint", "value":coolingSetpoint, "unit":location.temperatureScale)
 		log.debug "Done setCoolingSetpoint>> coolingSetpoint = ${coolingSetpoint}, heatingSetpoint = ${heatingSetpoint}"
 		generateSetpointEvent()
 		generateStatusEvent()
@@ -287,14 +287,14 @@ void resumeProgram() {
 	log.debug "resumeProgram() is called"
 	sendEvent("name":"thermostatStatus", "value":"resuming schedule", "description":statusText, displayed: false)
 	def deviceId = device.deviceNetworkId.split(/\./).last()
-	if (parent.resumeProgram(this, deviceId)) {
+	if (parent.resumeProgram(deviceId)) {
 		sendEvent("name":"thermostatStatus", "value":"setpoint is updating", "description":statusText, displayed: false)
 		runIn(5, "poll")
 		log.debug "resumeProgram() is done"
 		sendEvent("name":"resumeProgram", "value":"resume", descriptionText: "resumeProgram is done", displayed: false, isStateChange: true)
 	} else {
 		sendEvent("name":"thermostatStatus", "value":"failed resume click refresh", "description":statusText, displayed: false)
-		log.error "Error resumeProgram() check parent.resumeProgram(this, deviceId)"
+		log.error "Error resumeProgram() check parent.resumeProgram(deviceId)"
 	}
 
 }
@@ -406,7 +406,7 @@ def generateOperatingStateEvent(operatingState) {
 def off() {
 	log.debug "off"
 	def deviceId = device.deviceNetworkId.split(/\./).last()
-	if (parent.setMode (this,"off", deviceId))
+	if (parent.setMode ("off", deviceId))
 		generateModeEvent("off")
 	else {
 		log.debug "Error setting new mode."
@@ -420,7 +420,7 @@ def off() {
 def heat() {
 	log.debug "heat"
 	def deviceId = device.deviceNetworkId.split(/\./).last()
-	if (parent.setMode (this,"heat", deviceId))
+	if (parent.setMode ("heat", deviceId))
 		generateModeEvent("heat")
 	else {
 		log.debug "Error setting new mode."
@@ -438,7 +438,7 @@ def emergencyHeat() {
 def auxHeatOnly() {
 	log.debug "auxHeatOnly"
 	def deviceId = device.deviceNetworkId.split(/\./).last()
-	if (parent.setMode (this,"auxHeatOnly", deviceId))
+	if (parent.setMode ("auxHeatOnly", deviceId))
 		generateModeEvent("auxHeatOnly")
 	else {
 		log.debug "Error setting new mode."
@@ -452,7 +452,7 @@ def auxHeatOnly() {
 def cool() {
 	log.debug "cool"
 	def deviceId = device.deviceNetworkId.split(/\./).last()
-	if (parent.setMode (this,"cool", deviceId))
+	if (parent.setMode ("cool", deviceId))
 		generateModeEvent("cool")
 	else {
 		log.debug "Error setting new mode."
@@ -466,7 +466,7 @@ def cool() {
 def auto() {
 	log.debug "auto"
 	def deviceId = device.deviceNetworkId.split(/\./).last()
-	if (parent.setMode (this,"auto", deviceId))
+	if (parent.setMode ("auto", deviceId))
 		generateModeEvent("auto")
 	else {
 		log.debug "Error setting new mode."
@@ -489,7 +489,7 @@ def fanOn() {
 	def coolingValue = location.temperatureScale == "C"? convertCtoF(coolingSetpoint) : coolingSetpoint
 	def heatingValue = location.temperatureScale == "C"? convertCtoF(heatingSetpoint) : heatingSetpoint
 
-	if (parent.setFanMode(this, heatingValue, coolingValue, deviceId, sendHoldType, fanMode)) {
+	if (parent.setFanMode(heatingValue, coolingValue, deviceId, sendHoldType, fanMode)) {
 		generateFanModeEvent(fanMode)
 	} else {
 		log.debug "Error setting new mode."
@@ -510,7 +510,7 @@ def fanAuto() {
 	def coolingValue = location.temperatureScale == "C"? convertCtoF(coolingSetpoint) : coolingSetpoint
 	def heatingValue = location.temperatureScale == "C"? convertCtoF(heatingSetpoint) : heatingSetpoint
 
-	if (parent.setFanMode(this, heatingValue, coolingValue, deviceId, sendHoldType, fanMode)) {
+	if (parent.setFanMode(heatingValue, coolingValue, deviceId, sendHoldType, fanMode)) {
 		generateFanModeEvent(fanMode)
 	} else {
 		log.debug "Error setting new mode."
@@ -556,12 +556,12 @@ def generateSetpointEvent() {
 
 	if (mode == "heat") {
 
-		sendEvent("name":"thermostatSetpoint", "value":heatingSetpoint )
+		sendEvent("name":"thermostatSetpoint", "value":heatingSetpoint, "unit":location.temperatureScale)
 
 	}
 	else if (mode == "cool") {
 
-		sendEvent("name":"thermostatSetpoint", "value":coolingSetpoint)
+		sendEvent("name":"thermostatSetpoint", "value":coolingSetpoint, "unit":location.temperatureScale)
 
 	} else if (mode == "auto") {
 
@@ -573,7 +573,7 @@ def generateSetpointEvent() {
 
 	} else if (mode == "auxHeatOnly") {
 
-		sendEvent("name":"thermostatSetpoint", "value":heatingSetpoint)
+		sendEvent("name":"thermostatSetpoint", "value":heatingSetpoint, "unit":location.temperatureScale)
 
 	}
 
@@ -608,7 +608,7 @@ void raiseSetpoint() {
 			targetvalue = maxCoolingSetpoint
 		}
 
-		sendEvent("name":"thermostatSetpoint", "value":targetvalue, displayed: false)
+		sendEvent("name":"thermostatSetpoint", "value":targetvalue, "unit":location.temperatureScale, displayed: false)
 		log.info "In mode $mode raiseSetpoint() to $targetvalue"
 
 		runIn(3, "alterSetpoint", [data: [value:targetvalue], overwrite: true]) //when user click button this runIn will be overwrite
@@ -644,7 +644,7 @@ void lowerSetpoint() {
 			targetvalue = minCoolingSetpoint
 		}
 
-		sendEvent("name":"thermostatSetpoint", "value":targetvalue, displayed: false)
+		sendEvent("name":"thermostatSetpoint", "value":targetvalue, "unit":location.temperatureScale, displayed: false)
 		log.info "In mode $mode lowerSetpoint() to $targetvalue"
 
 		runIn(3, "alterSetpoint", [data: [value:targetvalue], overwrite: true]) //when user click button this runIn will be overwrite
@@ -690,10 +690,10 @@ void alterSetpoint(temp) {
 	def coolingValue = location.temperatureScale == "C"? convertCtoF(targetCoolingSetpoint) : targetCoolingSetpoint
 	def heatingValue = location.temperatureScale == "C"? convertCtoF(targetHeatingSetpoint) : targetHeatingSetpoint
 
-	if (parent.setHold(this, heatingValue, coolingValue, deviceId, sendHoldType)) {
+	if (parent.setHold(heatingValue, coolingValue, deviceId, sendHoldType)) {
 		sendEvent("name": "thermostatSetpoint", "value": temp.value, displayed: false)
-		sendEvent("name": "heatingSetpoint", "value": targetHeatingSetpoint)
+		sendEvent("name": "heatingSetpoint", "value": targetHeatingSetpoint, "unit": location.temperatureScale)
-		sendEvent("name": "coolingSetpoint", "value": targetCoolingSetpoint)
+		sendEvent("name": "coolingSetpoint", "value": targetCoolingSetpoint, "unit": location.temperatureScale)
 		log.debug "alterSetpoint in mode $mode succeed change setpoint to= ${temp.value}"
 	} else {
 		log.error "Error alterSetpoint()"

devicetypes/smartthings/hue-bloom.src/hue-bloom.groovy

@@ -16,6 +16,7 @@ metadata {
 		capability "Switch"
 		capability "Refresh"
 		capability "Sensor"
+		capability "Health Check"
 
 		command "setAdjustedColor"
         command "reset"
@@ -55,6 +56,10 @@ metadata {
 	}
 }
 
+void installed() {
+	sendEvent(name: "checkInterval", value: 60 * 30, data: [protocol: "lan"], displayed: false)
+}
+
 // parse events into attributes
 def parse(description) {
 	log.debug "parse() - $description"
@@ -166,3 +171,7 @@ def verifyPercent(percent) {
         return false
     }
 }
+
+def ping() {
+    log.debug "${parent.ping(this)}"
+}

devicetypes/smartthings/hue-bulb.src/hue-bulb.groovy

@@ -17,6 +17,7 @@ metadata {
 		capability "Switch"
 		capability "Refresh"
 		capability "Sensor"
+		capability "Health Check"
 
 		command "setAdjustedColor"
         command "reset"
@@ -64,6 +65,10 @@ metadata {
 	}
 }
 
+void installed() {
+	sendEvent(name: "checkInterval", value: 60 * 30, data: [protocol: "lan"], displayed: false)
+}
+
 // parse events into attributes
 def parse(description) {
 	log.debug "parse() - $description"
@@ -182,3 +187,7 @@ def verifyPercent(percent) {
         return false
     }
 }
+
+def ping() {
+    log.trace "${parent.ping(this)}"
+}

devicetypes/smartthings/hue-lux-bulb.src/hue-lux-bulb.groovy

@@ -14,6 +14,7 @@ metadata {
 		capability "Switch"
 		capability "Refresh"
 		capability "Sensor"
+        capability "Health Check"
 
         command "refresh"
 	}
@@ -48,6 +49,10 @@ metadata {
     }
 }
 
+void installed() {
+	sendEvent(name: "checkInterval", value: 60 * 30, data: [protocol: "lan"], displayed: false)
+}
+
 // parse events into attributes
 def parse(description) {
 	log.debug "parse() - $description"
@@ -87,3 +92,7 @@ void refresh() {
 	log.debug "Executing 'refresh'"
 	parent.manualRefresh()
 }
+
+def ping() {
+    log.debug "${parent.ping(this)}"
+}

devicetypes/smartthings/hue-white-ambiance-bulb.src/hue-white-ambiance-bulb.groovy

@@ -15,6 +15,7 @@ metadata {
         capability "Color Temperature"
         capability "Switch"
         capability "Refresh"
+        capability "Health Check"
 
         command "refresh"
     }
@@ -53,6 +54,10 @@ metadata {
     }
 }
 
+void installed() {
+	sendEvent(name: "checkInterval", value: 60 * 30, data: [protocol: "lan"], displayed: false)
+}
+
 // parse events into attributes
 def parse(description) {
     log.debug "parse() - $description"
@@ -101,3 +106,7 @@ void refresh() {
     log.debug "Executing 'refresh'"
     parent.manualRefresh()
 }
+
+def ping() {
+    log.debug "${parent.ping(this)}"
+}

devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy

@@ -233,6 +233,8 @@ private Map getBatteryResult(rawValue) {
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
 				def roundedPct = Math.round(pct * 100)
+				if (roundedPct <= 0)
+					roundedPct = 1
 				result.value = Math.min(100, roundedPct)
 				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
 			}

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -248,6 +248,8 @@ private Map getBatteryResult(rawValue) {
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
 				def roundedPct = Math.round(pct * 100)
+				if (roundedPct <= 0)
+					roundedPct = 1
 				result.value = Math.min(100, roundedPct)
 				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
 			}

devicetypes/smartthings/smartsense-motion-temp-sensor.src/smartsense-motion-temp-sensor.groovy

@@ -206,6 +206,8 @@ private Map getBatteryResult(rawValue) {
 			def maxVolts = 3.0
 			def pct = (volts - minVolts) / (maxVolts - minVolts)
 			def roundedPct = Math.round(pct * 100)
+			if (roundedPct <= 0)
+				roundedPct = 1
 			result.value = Math.min(100, roundedPct)
 			result.descriptionText = "${linkText} battery was ${result.value}%"
 		}

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -313,6 +313,8 @@ private Map getBatteryResult(rawValue) {
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
 				def roundedPct = Math.round(pct * 100)
+				if (roundedPct <= 0)
+					roundedPct = 1
 				result.value = Math.min(100, roundedPct)
 				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
 			}

devicetypes/smartthings/smartsense-open-closed-accelerometer-sensor.src/smartsense-open-closed-accelerometer-sensor.groovy

@@ -206,6 +206,8 @@ def getTemperature(value) {
 			def maxVolts = 3.0
 			def pct = (volts - minVolts) / (maxVolts - minVolts)
 			def roundedPct = Math.round(pct * 100)
+	        if (roundedPct <= 0)
+		        roundedPct = 1
 			result.value = Math.min(100, roundedPct)
 			result.descriptionText = "${linkText} battery was ${result.value}%"
 		}

devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy

@@ -207,6 +207,8 @@ private Map getBatteryResult(rawValue) {
     	def maxVolts = 3.0
 		def pct = (volts - minVolts) / (maxVolts - minVolts)
 		def roundedPct = Math.round(pct * 100)
+	    if (roundedPct <= 0)
+		    roundedPct = 1
 		result.value = Math.min(100, roundedPct)
 		result.descriptionText = "${linkText} battery was ${result.value}%"
 	}

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy

@@ -214,6 +214,8 @@ private Map getBatteryResult(rawValue) {
     	def maxVolts = 3.0
 		def pct = (volts - minVolts) / (maxVolts - minVolts)
 		def roundedPct = Math.round(pct * 100)
+	    if (roundedPct <= 0)
+		    roundedPct = 1
 		result.value = Math.min(100, roundedPct)
 		result.descriptionText = "${linkText} battery was ${result.value}%"
 	}

smartapps/curb/curb-control.src/curb-control.groovy

@@ -65,7 +65,16 @@ void updateSwitch() {
 private void updateAll(devices) {
 	def command = request.JSON?.command
 	if (command) {
-		devices."$command"()
+		switch(command) {
+			case "on":
+				devices.on()
+				break
+			case "off":
+				devices.off()
+				break
+			default:
+				httpError(403, "Access denied. This command is not supported by current capability.")
+		}
 	}
 }
 
@@ -77,7 +86,16 @@ private void update(devices) {
 		if (!device) {
 			httpError(404, "Device not found")
 		} else {
-			device."$command"()
+			switch(command) {
+				case "on":
+					device.on()
+					break
+				case "off":
+					device.off()
+					break
+				default:
+					httpError(403, "Access denied. This command is not supported by current capability.")
+			}
 		}
 	}
 }

smartapps/dianoga/netatmo-connect.src/netatmo-connect.groovy

@@ -58,7 +58,7 @@ def authPage() {
 	if (canInstallLabs()) {
 
 		def redirectUrl = getBuildRedirectUrl()
-		log.debug "Redirect url = ${redirectUrl}"
+		// log.debug "Redirect url = ${redirectUrl}"
 
 		if (state.authToken) {
 			description = "Tap 'Next' to proceed"
@@ -113,13 +113,13 @@ def oauthInitUrl() {
 		scope: "read_station"
 	]
 
-	log.debug "REDIRECT URL: ${getVendorAuthPath() + toQueryString(oauthParams)}"
+	// log.debug "REDIRECT URL: ${getVendorAuthPath() + toQueryString(oauthParams)}"
 
 	redirect (location: getVendorAuthPath() + toQueryString(oauthParams))
 }
 
 def callback() {
-	log.debug "callback()>> params: $params, params.code ${params.code}"
+	// log.debug "callback()>> params: $params, params.code ${params.code}"
 
 	def code = params.code
 	def oauthState = params.state
@@ -135,7 +135,7 @@ def callback() {
 			scope: "read_station"
 		]
 
-		log.debug "TOKEN URL: ${getVendorTokenPath() + toQueryString(tokenParams)}"
+		// log.debug "TOKEN URL: ${getVendorTokenPath() + toQueryString(tokenParams)}"
 
 		def tokenUrl = getVendorTokenPath()
 		def params = [
@@ -144,7 +144,7 @@ def callback() {
 			body: tokenParams
 		]
 
-		log.debug "PARAMS: ${params}"
+		// log.debug "PARAMS: ${params}"
 
 		httpPost(params) { resp ->
 
@@ -156,7 +156,7 @@ def callback() {
 				state.refreshToken = data.refresh_token
 				state.authToken = data.access_token
 				state.tokenExpires = now() + (data.expires_in * 1000)
-				log.debug "swapped token: $resp.data"
+				// log.debug "swapped token: $resp.data"
 			}
 		}
 
@@ -292,7 +292,7 @@ def refreshToken() {
 
 			response.data.each {key, value ->
 				def data = slurper.parseText(key);
-				log.debug "Data: $data"
+				// log.debug "Data: $data"
 
 				state.refreshToken = data.refresh_token
 				state.accessToken = data.access_token

smartapps/resteele/monitor-on-sense.src/monitor-on-sense.groovy

@@ -17,7 +17,7 @@ definition(
     name: "Monitor on Sense",
     namespace: "resteele",
     author: "Rachel Steele",
-    description: "Turn on Monitor when vibration is sensed",
+    description: "Turn on switch when vibration is sensed",
     category: "My Apps",
     iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
     iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
@@ -25,10 +25,10 @@ definition(
 
 
 preferences {
-	section("When the keyboard is used...") {
+	section("When vibration is sensed...") {
 		input "accelerationSensor", "capability.accelerationSensor", title: "Which Sensor?"
 	}
-section("Turn on/off a light...") {
+section("Turn on switch...") {
 		input "switch1", "capability.switch"
 	}
 }
@@ -47,5 +47,3 @@ def updated() {
 def accelerationActiveHandler(evt) {
 		switch1.on()
 	}
-
-

smartapps/smartthings/beacon-control.src/beacon-control.groovy

@@ -114,13 +114,16 @@ def beaconHandler(evt) {
 
 	if (allOk) {
 		def data = new groovy.json.JsonSlurper().parseText(evt.data)
-		log.debug "<beacon-control> data: $data - phones: " + phones*.deviceNetworkId
+                // removed logging of device names. can be added back for debugging
+		//log.debug "<beacon-control> data: $data - phones: " + phones*.deviceNetworkId
 
 		def beaconName = getBeaconName(evt)
-		log.debug "<beacon-control> beaconName: $beaconName"
+                // removed logging of device names. can be added back for debugging
+		//log.debug "<beacon-control> beaconName: $beaconName"
 
 		def phoneName = getPhoneName(data)
-		log.debug "<beacon-control> phoneName: $phoneName"
+                // removed logging of device names. can be added back for debugging
+		//log.debug "<beacon-control> phoneName: $phoneName"
 		if (phoneName != null) {
             def action = data.presence == "1" ? "arrived" : "left"
             def msg = "$phoneName has $action ${action == 'arrived' ? 'at ' : ''}the $beaconName"

smartapps/smartthings/bon-voyage.src/bon-voyage.groovy

@@ -49,13 +49,15 @@ preferences {
 
 def installed() {
 	log.debug "Installed with settings: ${settings}"
-	log.debug "Current mode = ${location.mode}, people = ${people.collect{it.label + ': ' + it.currentPresence}}"
+        // commented out log statement because presence sensor label could contain user's name
+	//log.debug "Current mode = ${location.mode}, people = ${people.collect{it.label + ': ' + it.currentPresence}}"
 	subscribe(people, "presence", presence)
 }
 
 def updated() {
 	log.debug "Updated with settings: ${settings}"
-	log.debug "Current mode = ${location.mode}, people = ${people.collect{it.label + ': ' + it.currentPresence}}"
+        // commented out log statement because presence sensor label could contain user's name
+	//log.debug "Current mode = ${location.mode}, people = ${people.collect{it.label + ': ' + it.currentPresence}}"
 	unsubscribe()
 	subscribe(people, "presence", presence)
 }

smartapps/smartthings/energy-alerts.src/energy-alerts.groovy

@@ -64,10 +64,12 @@ def meterHandler(evt) {
     def lastValue = atomicState.lastValue as double
     atomicState.lastValue = meterValue
 
+    def dUnit ? evt.unit : "Watts"
+
     def aboveThresholdValue = aboveThreshold as int
     if (meterValue > aboveThresholdValue) {
     	if (lastValue < aboveThresholdValue) { // only send notifications when crossing the threshold
-		    def msg = "${meter} reported ${evt.value} ${evt.unit} which is above your threshold of ${aboveThreshold}."
+		    def msg = "${meter} reported ${evt.value} ${dUnit} which is above your threshold of ${aboveThreshold}."
     	    sendMessage(msg)
         } else {
 //        	log.debug "not sending notification for ${evt.description} because the threshold (${aboveThreshold}) has already been crossed"
@@ -78,7 +80,7 @@ def meterHandler(evt) {
     def belowThresholdValue = belowThreshold as int
     if (meterValue < belowThresholdValue) {
     	if (lastValue > belowThresholdValue) { // only send notifications when crossing the threshold
-		    def msg = "${meter} reported ${evt.value} ${evt.unit} which is below your threshold of ${belowThreshold}."
+		    def msg = "${meter} reported ${evt.value} ${dUnit} which is below your threshold of ${belowThreshold}."
     	    sendMessage(msg)
         } else {
 //        	log.debug "not sending notification for ${evt.description} because the threshold (${belowThreshold}) has already been crossed"

smartapps/smartthings/flood-alert.src/flood-alert.groovy

@@ -54,10 +54,10 @@ def waterWetHandler(evt) {
 	def alreadySentSms = recentEvents.count { it.value && it.value == "wet" } > 1
 
 	if (alreadySentSms) {
-		log.debug "SMS already sent to $phone within the last $deltaSeconds seconds"
+		log.debug "SMS already sent within the last $deltaSeconds seconds"
 	} else {
 		def msg = "${alarm.displayName} is wet!"
-		log.debug "$alarm is wet, texting $phone"
+		log.debug "$alarm is wet, texting phone number"
 
 		if (location.contactBookEnabled) {
 			sendNotificationToContacts(msg, recipients)

smartapps/smartthings/garage-door-monitor.src/garage-door-monitor.groovy

@@ -90,7 +90,7 @@ def takeAction(){
 }
 
 def sendTextMessage() {
-	log.debug "$multisensor was open too long, texting $phone"
+	log.debug "$multisensor was open too long, texting phone"
 
 	updateSmsHistory()
 	def openMinutes = maxOpenTime * (state.smsHistory?.size() ?: 1)

smartapps/smartthings/gentle-wake-up.src/gentle-wake-up.groovy

@@ -761,7 +761,7 @@ String displayableTime(timeRemaining) {
 		return "${minutes}:00"
 	}
 	def fraction = "0.${parts[1]}" as double
-	def seconds = "${60 * fraction as int}".padRight(2, "0")
+	def seconds = "${60 * fraction as int}".padLeft(2, "0")
 	return "${minutes}:${seconds}"
 }
 

smartapps/smartthings/greetings-earthling.src/greetings-earthling.groovy

@@ -47,13 +47,13 @@ preferences {
 
 def installed() {
 	log.debug "Installed with settings: ${settings}"
-	log.debug "Current mode = ${location.mode}, people = ${people.collect{it.label + ': ' + it.currentPresence}}"
+	// log.debug "Current mode = ${location.mode}, people = ${people.collect{it.label + ': ' + it.currentPresence}}"
 	subscribe(people, "presence", presence)
 }
 
 def updated() {
 	log.debug "Updated with settings: ${settings}"
-	log.debug "Current mode = ${location.mode}, people = ${people.collect{it.label + ': ' + it.currentPresence}}"
+	// log.debug "Current mode = ${location.mode}, people = ${people.collect{it.label + ': ' + it.currentPresence}}"
 	unsubscribe()
 	subscribe(people, "presence", presence)
 }
@@ -71,11 +71,10 @@ def presence(evt)
 			def person = getPerson(evt)
 			def recentNotPresent = person.statesSince("presence", t0).find{it.value == "not present"}
 			if (recentNotPresent) {
-				log.debug "skipping notification of arrival of ${person.displayName} because last departure was only ${now() - recentNotPresent.date.time} msec ago"
+				log.debug "skipping notification of arrival of Person because last departure was only ${now() - recentNotPresent.date.time} msec ago"
 			}
 			else {
 				def message = "${person.displayName} arrived at home, changing mode to '${newMode}'"
-				log.info message
 				send(message)
 				setLocationMode(newMode)
 			}
@@ -106,6 +105,4 @@ private send(msg) {
             sendSms(phone, msg)
         }
     }
-
-	log.debug msg
 }

smartapps/smartthings/habit-helper.src/habit-helper.groovy

@@ -57,12 +57,11 @@ def scheduleCheck()
 	def message = message1 ?: "SmartThings - Habit Helper Reminder!"
 
     if (location.contactBookEnabled) {
-        log.debug "Texting reminder: ($message) to contacts:${recipients?.size()}"
+        log.debug "Texting reminder to contacts:${recipients?.size()}"
         sendNotificationToContacts(message, recipients)
     }
     else {
-
+        log.debug "Texting reminder"
-        log.debug "Texting reminder: ($message) to $phone1"
         sendSms(phone1, message)
     }
 }

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -95,8 +95,7 @@ def bridgeDiscoveryFailed() {
 	}
 }
 
-def bridgeLinking()
+def bridgeLinking() {
-{
 	int linkRefreshcount = !state.linkRefreshcount ? 0 : state.linkRefreshcount as int
 	state.linkRefreshcount = linkRefreshcount + 1
 	def refreshInterval = 3
@@ -328,7 +327,7 @@ def bulbListHandler(hub, data = "") {
         def object = new groovy.json.JsonSlurper().parseText(data)
         object.each { k,v ->
             if (v instanceof Map)
-                bulbs[k] = [id: k, name: v.name, type: v.type, modelid: v.modelid, hub:hub]
+                bulbs[k] = [id: k, name: v.name, type: v.type, modelid: v.modelid, hub:hub, online: v.state?.reachable]
         }
     }
     def bridge = null
@@ -448,7 +447,6 @@ def addBridge() {
 					updateBridgeStatus(childDevice)
 					childDevice.sendEvent(name: "idNumber", value: idNumber)
 
-
 					if (vbridge.value.ip && vbridge.value.port) {
 						if (vbridge.value.ip.contains(".")) {
 							childDevice.sendEvent(name: "networkAddress", value: vbridge.value.ip + ":" +  vbridge.value.port)
@@ -649,8 +647,7 @@ def locationHandler(evt) {
             	}
             }
 		}
-	}
+	} else if (parsedEvent.headers && parsedEvent.body) {
-	else if (parsedEvent.headers && parsedEvent.body) {
 		log.trace "HUE BRIDGE RESPONSES"
 		def headerString = parsedEvent.headers.toString()
 		if (headerString?.contains("xml")) {
@@ -733,7 +730,7 @@ private void updateBridgeStatus(childDevice) {
 private void checkBridgeStatus() {
     def bridges = getHueBridges()
     // Check if each bridge has been heard from within the last 16 minutes (3 poll intervals times 5 minutes plus buffer)
-    def time = now() - (1000 * 60 * 16)
+    def time = now() - (1000 * 60 * 30)
     bridges.each {
         def d = getChildDevice(it.value.mac)
 	    if(d) {
@@ -746,6 +743,8 @@ private void checkBridgeStatus() {
 	        if (it.value.lastActivity < time) { // it.value.lastActivity != null &&
 	            log.warn "Bridge $it.key is Offline"
 	            d.sendEvent(name: "status", value: "Offline")
+                // set all lights to offline since bridge is not reachable
+                state.bulbs?.each {it.value.online = false}
 	        } else {
 				d.sendEvent(name: "status", value: "Online")//setOnline(false)
 	        }
@@ -785,8 +784,7 @@ def parse(childDevice, description) {
             if (body instanceof java.util.Map) {
                 // get (poll) reponse
                 return handlePoll(body)
-            }
+			} else {
-            else {
 				//put response
 				return handleCommandResponse(body)
             }
@@ -883,36 +881,40 @@ private handleCommandResponse(body) {
 	// scan entire response before sending events to make sure they are always in the same order
 	def updates = [:]
 
-                body.each { payload ->
+	body.each { payload ->
-                    log.debug $payload
+		log.debug $payload
 
 		if (payload?.success) {
-                        def childDeviceNetworkId = app.id + "/"
+			def childDeviceNetworkId = app.id + "/"
-                        def eventType
+			def eventType
 			payload.success.each { k, v ->
 				def data = k.split("/")
 				if (data.length == 5) {
 					childDeviceNetworkId = app.id + "/" + k.split("/")[2]
 					if (!updates[childDeviceNetworkId])
 						updates[childDeviceNetworkId] = [:]
-                            eventType = k.split("/")[4]
+					eventType = k.split("/")[4]
 					updates[childDeviceNetworkId]."$eventType" = v
 				}
 			}
 		} else if (payload.error) {
 			log.warn "Error returned from Hue bridge error = ${body?.error}"
-                            }
+		}
-                        }
+	}
 
 	// send events for each update found above (order of events should be same as handlePoll())
 	updates.each { childDeviceNetworkId, params ->
 		def device = getChildDevice(childDeviceNetworkId)
-		sendBasicEvents(device, "on", params.on)
+		def id = getId(device)
-		sendBasicEvents(device, "bri", params.bri)
+		// If device is offline, then don't send events which will update device watch
-		sendColorEvents(device, params.xy, params.hue, params.sat, params.ct)
+		if (isOnline(id)) {
-                    }
+			sendBasicEvents(device, "on", params.on)
+			sendBasicEvents(device, "bri", params.bri)
+			sendColorEvents(device, params.xy, params.hue, params.sat, params.ct)
+		}
+	}
 	return []
-                    }
+}
 
 /**
  * Handles a response to a poll (GET) sent to the Hue Bridge.
@@ -932,26 +934,32 @@ private handleCommandResponse(body) {
  * @return empty array
  */
 private handlePoll(body) {
-	if (state.updating) {
-		// If user just executed commands, then ignore poll to not confuse the turning on/off state
-		return []
-                }
-
 	def bulbs = getChildDevices()
 	for (bulb in body) {
 		def device = bulbs.find{it.deviceNetworkId == "${app.id}/${bulb.key}"}
 		if (device) {
 			if (bulb.value.state?.reachable) {
-				sendBasicEvents(device, "on", bulb.value?.state?.on)
+				if (state.bulbs[bulb.key]?.online == false) {
-				sendBasicEvents(device, "bri", bulb.value?.state?.bri)
+					// light just came back online, notify device watch
-				sendColorEvents(device, bulb.value?.state?.xy, bulb.value?.state?.hue, bulb.value?.state?.sat, bulb.value?.state?.ct, bulb.value?.state?.colormode)
+					def lastActivity = now()
+					device.sendEvent(name: "deviceWatch-status", value: "ONLINE", description: "Last Activity is on ${new Date((long) lastActivity)}", displayed: false, isStateChange: true)
+				}
+				state.bulbs[bulb.key]?.online = true
+
+				// If user just executed commands, then do not send events to avoid confusing the turning on/off state
+				if (!state.updating) {
+					sendBasicEvents(device, "on", bulb.value?.state?.on)
+					sendBasicEvents(device, "bri", bulb.value?.state?.bri)
+					sendColorEvents(device, bulb.value?.state?.xy, bulb.value?.state?.hue, bulb.value?.state?.sat, bulb.value?.state?.ct, bulb.value?.state?.colormode)
+				}
 			} else {
+				state.bulbs[bulb.key]?.online = false
 				log.warn "$device is not reachable by Hue bridge"
-                    }
+			}
-                }
+		}
-            }
-		return []
 	}
+	return []
+}
 
 private updateInProgress() {
 	state.updating = true
@@ -980,22 +988,34 @@ def hubVerification(bodytext) {
 
 def on(childDevice) {
 	log.debug "Executing 'on'"
+	def id = getId(childDevice)
+	if (!isOnline(id)) {
+		return "Bulb is unreachable"
+	}
 	updateInProgress()
 	createSwitchEvent(childDevice, "on")
-	put("lights/${getId(childDevice)}/state", [on: true])
+	put("lights/$id/state", [on: true])
     return "Bulb is turning On"
 }
 
 def off(childDevice) {
 	log.debug "Executing 'off'"
+	def id = getId(childDevice)
+	if (!isOnline(id)) {
+		return "Bulb is unreachable"
+	}
 	updateInProgress()
 	createSwitchEvent(childDevice, "off")
-	put("lights/${getId(childDevice)}/state", [on: false])
+	put("lights/$id/state", [on: false])
     return "Bulb is turning Off"
 }
 
 def setLevel(childDevice, percent) {
 	log.debug "Executing 'setLevel'"
+	def id = getId(childDevice)
+	if (!isOnline(id)) {
+		return "Bulb is unreachable"
+	}
     updateInProgress()
 	// 1 - 254
     def level
@@ -1010,48 +1030,64 @@ def setLevel(childDevice, percent) {
 	// that means that the light will still be on when on is called next time
 	// Lets emulate that here
 	if (percent > 0) {
-		put("lights/${getId(childDevice)}/state", [bri: level, on: true])
+		put("lights/$id/state", [bri: level, on: true])
 	} else {
-		put("lights/${getId(childDevice)}/state", [on: false])
+		put("lights/$id/state", [on: false])
 	}
 	return "Setting level to $percent"
 }
 
 def setSaturation(childDevice, percent) {
 	log.debug "Executing 'setSaturation($percent)'"
-    updateInProgress()
+	def id = getId(childDevice)
+	if (!isOnline(id)) {
+		return "Bulb is unreachable"
+	}
+
+	updateInProgress()
 	// 0 - 254
 	def level = Math.min(Math.round(percent * 254 / 100), 254)
 	// TODO should this be done by app only or should we default to on?
 	createSwitchEvent(childDevice, "on")
-	put("lights/${getId(childDevice)}/state", [sat: level, on: true])
+	put("lights/$id/state", [sat: level, on: true])
 	return "Setting saturation to $percent"
 }
 
 def setHue(childDevice, percent) {
 	log.debug "Executing 'setHue($percent)'"
+	def id = getId(childDevice)
+	if (!isOnline(id)) {
+		return "Bulb is unreachable"
+	}
     updateInProgress()
 	// 0 - 65535
 	def level =	Math.min(Math.round(percent * 65535 / 100), 65535)
 	// TODO should this be done by app only or should we default to on?
 	createSwitchEvent(childDevice, "on")
-	put("lights/${getId(childDevice)}/state", [hue: level, on: true])
+	put("lights/$id/state", [hue: level, on: true])
 	return "Setting hue to $percent"
 }
 
 def setColorTemperature(childDevice, huesettings) {
 	log.debug "Executing 'setColorTemperature($huesettings)'"
+	def id = getId(childDevice)
+	if (!isOnline(id)) {
+		return "Bulb is unreachable"
+	}
     updateInProgress()
 	// 153 (6500K) to 500 (2000K)
 	def ct = hueSettings == 6500 ? 153 : Math.round(1000000/huesettings)
 	createSwitchEvent(childDevice, "on")
-	put("lights/${getId(childDevice)}/state", [ct: ct, on: true])
+	put("lights/$id/state", [ct: ct, on: true])
 	return "Setting color temperature to $percent"
 }
 
 def setColor(childDevice, huesettings) {
     log.debug "Executing 'setColor($huesettings)'"
-
+	def id = getId(childDevice)
+	if (!isOnline(id)) {
+		return "Bulb is unreachable"
+	}
     updateInProgress()
 
     def value = [:]
@@ -1108,15 +1144,23 @@ def setColor(childDevice, huesettings) {
         value.on = false
 
 	createSwitchEvent(childDevice, value.on ? "on" : "off")
-    put("lights/${getId(childDevice)}/state", value)
+    put("lights/$id/state", value)
 	return "Setting color to $value"
 }
 
+def ping(childDevice) {
+	if (isOnline(getId(childDevice))) {
+		childDevice.sendEvent(name: "deviceWatch-ping", value: "ONLINE", description: "Hue Light is reachable", displayed: false, isStateChange: true)
+		return "Device is Online"
+	} else {
+		return "Device is Offline"
+	}
+}
+
 private getId(childDevice) {
 	if (childDevice.device?.deviceNetworkId?.startsWith("HUE")) {
 		return childDevice.device?.deviceNetworkId[3..-1]
-	}
+	} else {
-	else {
 		return childDevice.device?.deviceNetworkId.split("/")[-1]
 	}
 }
@@ -1127,10 +1171,13 @@ private poll() {
 	log.debug "GET: $host$uri"
 	sendHubCommand(new physicalgraph.device.HubAction("""GET ${uri} HTTP/1.1
 HOST: ${host}
-
 """, physicalgraph.device.Protocol.LAN, selectedHue))
 }
 
+private isOnline(id) {
+	return (state.bulbs[id].online != null && state.bulbs[id].online) || state.bulbs[id].online == null
+}
+
 private put(path, body) {
 	def host = getBridgeIP()
 	def uri = "/api/${state.username}/$path"
@@ -1198,7 +1245,7 @@ def convertBulbListToMap() {
 		if (state.bulbs instanceof java.util.List) {
 			def map = [:]
 			state.bulbs.unique {it.id}.each { bulb ->
-				map << ["${bulb.id}":["id":bulb.id, "name":bulb.name, "type": bulb.type, "modelid": bulb.modelid, "hub":bulb.hub]]
+				map << ["${bulb.id}":["id":bulb.id, "name":bulb.name, "type": bulb.type, "modelid": bulb.modelid, "hub":bulb.hub, "online": bulb.online]]
 			}
 			state.bulbs = map
 		}

smartapps/smartthings/it-moved.src/it-moved.groovy

@@ -53,14 +53,14 @@ def accelerationActiveHandler(evt) {
 	def alreadySentSms = recentEvents.count { it.value && it.value == "active" } > 1
 
 	if (alreadySentSms) {
-		log.debug "SMS already sent to $phone1 within the last $deltaSeconds seconds"
+		log.debug "SMS already sent within the last $deltaSeconds seconds"
 	} else {
         if (location.contactBookEnabled) {
-            log.debug "$accelerationSensor has moved, texting contacts: ${recipients?.size()}"
+            log.debug "accelerationSensor has moved, texting contacts: ${recipients?.size()}"
             sendNotificationToContacts("${accelerationSensor.label ?: accelerationSensor.name} moved", recipients)
         }
         else {
-            log.debug "$accelerationSensor has moved, texting $phone1"
+            log.debug "accelerationSensor has moved, sending text message"
             sendSms(phone1, "${accelerationSensor.label ?: accelerationSensor.name} moved")
         }
 	}

smartapps/smartthings/its-too-hot.src/its-too-hot.groovy

@@ -69,10 +69,10 @@ def temperatureHandler(evt) {
 		def alreadySentSms = recentEvents.count { it.doubleValue >= tooHot } > 1
 
 		if (alreadySentSms) {
-			log.debug "SMS already sent to $phone1 within the last $deltaMinutes minutes"
+			log.debug "SMS already sent within the last $deltaMinutes minutes"
 			// TODO: Send "Temperature back to normal" SMS, turn switch off
 		} else {
-			log.debug "Temperature rose above $tooHot:  sending SMS to $phone1 and activating $mySwitch"
+			log.debug "Temperature rose above $tooHot:  sending SMS and activating $mySwitch"
 			def tempScale = location.temperatureScale ?: "F"
 			send("${temperatureSensor1.displayName} is too hot, reporting a temperature of ${evt.value}${evt.unit?:tempScale}")
 			switch1?.on()

smartapps/smartthings/lifx-connect.src/lifx-connect.groovy

@@ -50,9 +50,9 @@ def authPage() {
 		}
 		def description = "Tap to enter LIFX credentials"
 		def redirectUrl = "${serverUrl}/oauth/initialize?appId=${app.id}&access_token=${state.accessToken}&apiServerUrl=${apiServerUrl}" // this triggers oauthInit() below
-//        def redirectUrl = "${apiServerUrl}"
+		// def redirectUrl = "${apiServerUrl}"
-        log.debug "app id: ${app.id}"
+		// log.debug "app id: ${app.id}"
-		log.debug "redirect url: ${redirectUrl}"
+		// log.debug "redirect url: ${redirectUrl}"s
 		return dynamicPage(name: "Credentials", title: "Connect to LIFX", nextPage: null, uninstall: true, install:true) {
 			section {
 				href(url:redirectUrl, required:true, title:"Connect to LIFX", description:"Tap here to connect your LIFX account")
@@ -372,7 +372,7 @@ def updateDevices() {
 		def childDevice = getChildDevice(device.id)
 		selectors.add("${device.id}")
 		if (!childDevice) {
-			log.info("Adding device ${device.id}: ${device.product}")
+			// log.info("Adding device ${device.id}: ${device.product}")
 			def data = [
 					label: device.label,
 					level: Math.round((device.brightness ?: 1) * 100),

smartapps/smartthings/presence-change-push.src/presence-change-push.groovy

@@ -41,10 +41,10 @@ def updated() {
 
 def presenceHandler(evt) {
 	if (evt.value == "present") {
-		log.debug "${presence.label ?: presence.name} has arrived at the ${location}"
+		// log.debug "${presence.label ?: presence.name} has arrived at the ${location}"
     	sendPush("${presence.label ?: presence.name} has arrived at the ${location}")
 	} else if (evt.value == "not present") {
-		log.debug "${presence.label ?: presence.name} has left the ${location}"
+		// log.debug "${presence.label ?: presence.name} has left the ${location}"
     	sendPush("${presence.label ?: presence.name} has left the ${location}")
 	}
 }

smartapps/smartthings/presence-change-text.src/presence-change-text.groovy

@@ -47,7 +47,7 @@ def updated() {
 
 def presenceHandler(evt) {
 	if (evt.value == "present") {
-		log.debug "${presence.label ?: presence.name} has arrived at the ${location}"
+		// log.debug "${presence.label ?: presence.name} has arrived at the ${location}"
 
         if (location.contactBookEnabled) {
             sendNotificationToContacts("${presence.label ?: presence.name} has arrived at the ${location}", recipients)
@@ -56,7 +56,7 @@ def presenceHandler(evt) {
             sendSms(phone1, "${presence.label ?: presence.name} has arrived at the ${location}")
         }
 	} else if (evt.value == "not present") {
-		log.debug "${presence.label ?: presence.name} has left the ${location}"
+		// log.debug "${presence.label ?: presence.name} has left the ${location}"
 
         if (location.contactBookEnabled) {
             sendNotificationToContacts("${presence.label ?: presence.name} has left the ${location}", recipients)

smartapps/smartthings/ridiculously-automated-garage-door.src/ridiculously-automated-garage-door.groovy

@@ -67,7 +67,7 @@ def updated() {
 }
 
 def subscribe() {
-	log.debug "present: ${cars.collect{it.displayName + ': ' + it.currentPresence}}"
+	// log.debug "present: ${cars.collect{it.displayName + ': ' + it.currentPresence}}"
 	subscribe(doorSensor, "contact", garageDoorContact)
 
 	subscribe(cars, "presence", carPresence)

smartapps/smartthings/smart-security.src/smart-security.groovy

@@ -71,7 +71,7 @@ def updated() {
 private subscribeToEvents()
 {
 	subscribe intrusionMotions, "motion", intruderMotion
-	subscribe residentMotions, "motion", residentMotion
+	// subscribe residentMotions, "motion", residentMotion
 	subscribe intrusionContacts, "contact", contact
 	subscribe alarms, "alarm", alarm
 	subscribe(app, appTouch)
@@ -156,6 +156,7 @@ def residentMotion(evt)
 	//    	startReArmSequence()
 	//    }
 	//}
+  unsubscribe(residentMotions)
 }
 
 def contact(evt)

smartapps/smartthings/text-me-when-it-opens.src/text-me-when-it-opens.groovy

@@ -48,7 +48,7 @@ def updated()
 
 def contactOpenHandler(evt) {
 	log.trace "$evt.value: $evt, $settings"
-	log.debug "$contact1 was opened, texting $phone1"
+  log.debug "$contact1 was opened, sending text"
     if (location.contactBookEnabled) {
         sendNotificationToContacts("Your ${contact1.label ?: contact1.name} was opened", recipients)
     }

smartapps/smartthings/text-me-when-theres-motion-and-im-not-here.src/text-me-when-theres-motion-and-im-not-here.groovy

@@ -60,14 +60,14 @@ def motionActiveHandler(evt) {
 		def alreadySentSms = recentEvents.count { it.value && it.value == "active" } > 1
 
 		if (alreadySentSms) {
-			log.debug "SMS already sent to $phone1 within the last $deltaSeconds seconds"
+			log.debug "SMS already sent within the last $deltaSeconds seconds"
 		} else {
             if (location.contactBookEnabled) {
                 log.debug "$motion1 has moved while you were out, sending notifications to: ${recipients?.size()}"
                 sendNotificationToContacts("${motion1.label} ${motion1.name} moved while you were out", recipients)
             }
             else {
-                log.debug "$motion1 has moved while you were out, texting $phone1"
+                log.debug "$motion1 has moved while you were out, sending text"
                 sendSms(phone1, "${motion1.label} ${motion1.name} moved while you were out")
             }
 		}

smartapps/smartthings/the-gun-case-moved.src/the-gun-case-moved.groovy

@@ -53,13 +53,13 @@ def accelerationActiveHandler(evt) {
 	def alreadySentSms = recentEvents.count { it.value && it.value == "active" } > 1
 
 	if (alreadySentSms) {
-		log.debug "SMS already sent to $phone1 within the last $deltaSeconds seconds"
+		log.debug "SMS already sent to phone within the last $deltaSeconds seconds"
 	} else {
         if (location.contactBookEnabled) {
             sendNotificationToContacts("Gun case has moved!", recipients)
         }
         else {
-            log.debug "$accelerationSensor has moved, texting $phone1"
+            log.debug "$accelerationSensor has moved, texting phone"
             sendSms(phone1, "Gun case has moved!")
         }
 	}

smartapps/smartthings/withings.src/withings.groovy

@@ -60,7 +60,7 @@ def authPage() {
 
 def oauthInitUrl() {
 	def token = getToken()
-	log.debug "initiateOauth got token: $token"
+	//log.debug "initiateOauth got token: $token"
 
 	// store these for validate after the user takes the oauth journey
 	state.oauth_request_token = token.oauth_token
@@ -76,7 +76,7 @@ def getToken() {
 	]
 	def requestTokenBaseUrl = "https://oauth.withings.com/account/request_token"
 	def url = buildSignedUrl(requestTokenBaseUrl, params)
-	log.debug "getToken - url: $url"
+	//log.debug "getToken - url: $url"
 
 	return getJsonFromUrl(url)
 }
@@ -182,7 +182,7 @@ def exchangeToken() {
 
 	def requestTokenBaseUrl = "https://oauth.withings.com/account/access_token"
 	def url = buildSignedUrl(requestTokenBaseUrl, params, tokenSecret)
-	log.debug "signed url: $url with secret $tokenSecret"
+	//log.debug "signed url: $url with secret $tokenSecret"
 
 	def token = getJsonFromUrl(url)
 
@@ -198,8 +198,8 @@ def exchangeToken() {
 
 def load() {
 	def json = get(getMeasurement(new Date() - 30))
-
+	// removed logging of actual json payload.  Can be put back for debugging
-	log.debug "swapped, then received: $json"
+	log.debug "swapped, then received json"
 	parse(data:json)
 
 	def html = """