MSA-1518: Foscam Unaltered

alterSetpoint - check for auto or off mode

devicetypes/smartthings/cree-bulb.src/cree-bulb.groovy

@@ -97,16 +97,17 @@ def refresh() {
 }
 
 def healthPoll() {
+    log.debug "healthPoll()"
     def cmds = zigbee.onOffRefresh() + zigbee.levelRefresh()
     cmds.each{ sendHubCommand(new physicalgraph.device.HubAction(it))}
 }
 
 def configure() {
     unschedule()
-    schedule("0 0/5 * * * ? *", "healthPoll")
+    runEvery5Minutes("healthPoll")
     log.debug "Configuring Reporting and Bindings."
     // Device-Watch allows 2 check-in misses from device
-    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
+    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
     // minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
     zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
 }

devicetypes/smartthings/ecobee-thermostat.src/ecobee-thermostat.groovy

@@ -655,55 +655,60 @@ void lowerSetpoint() {
 void alterSetpoint(temp) {
 
 	def mode = device.currentValue("thermostatMode")
-	def heatingSetpoint = device.currentValue("heatingSetpoint")
-	def coolingSetpoint = device.currentValue("coolingSetpoint")
-	def deviceId = device.deviceNetworkId.split(/\./).last()
 
-	def targetHeatingSetpoint
+	if (mode == "off" || mode == "auto") {
-	def targetCoolingSetpoint
+		log.warn "this mode: $mode does not allow alterSetpoint"
-
-	//step1: check thermostatMode, enforce limits before sending request to cloud
-	if (mode == "heat" || mode == "auxHeatOnly"){
-		if (temp.value > coolingSetpoint){
-			targetHeatingSetpoint = temp.value
-			targetCoolingSetpoint = temp.value
-		} else {
-			targetHeatingSetpoint = temp.value
-			targetCoolingSetpoint = coolingSetpoint
-		}
-	} else if (mode == "cool") {
-		//enforce limits before sending request to cloud
-		if (temp.value < heatingSetpoint){
-			targetHeatingSetpoint = temp.value
-			targetCoolingSetpoint = temp.value
-		} else {
-			targetHeatingSetpoint = heatingSetpoint
-			targetCoolingSetpoint = temp.value
-		}
-	}
-
-	log.debug "alterSetpoint >> in mode ${mode} trying to change heatingSetpoint to $targetHeatingSetpoint " +
-			"coolingSetpoint to $targetCoolingSetpoint with holdType : ${holdType}"
-
-	def sendHoldType = holdType ? (holdType=="Temporary")? "nextTransition" : (holdType=="Permanent")? "indefinite" : "indefinite" : "indefinite"
-
-	def coolingValue = location.temperatureScale == "C"? convertCtoF(targetCoolingSetpoint) : targetCoolingSetpoint
-	def heatingValue = location.temperatureScale == "C"? convertCtoF(targetHeatingSetpoint) : targetHeatingSetpoint
-
-	if (parent.setHold(heatingValue, coolingValue, deviceId, sendHoldType)) {
-		sendEvent("name": "thermostatSetpoint", "value": temp.value, displayed: false)
-		sendEvent("name": "heatingSetpoint", "value": targetHeatingSetpoint, "unit": location.temperatureScale)
-		sendEvent("name": "coolingSetpoint", "value": targetCoolingSetpoint, "unit": location.temperatureScale)
-		log.debug "alterSetpoint in mode $mode succeed change setpoint to= ${temp.value}"
 	} else {
-		log.error "Error alterSetpoint()"
+		def heatingSetpoint = device.currentValue("heatingSetpoint")
+		def coolingSetpoint = device.currentValue("coolingSetpoint")
+		def deviceId = device.deviceNetworkId.split(/\./).last()
+
+		def targetHeatingSetpoint
+		def targetCoolingSetpoint
+
+		//step1: check thermostatMode, enforce limits before sending request to cloud
 		if (mode == "heat" || mode == "auxHeatOnly"){
-			sendEvent("name": "thermostatSetpoint", "value": heatingSetpoint.toString(), displayed: false)
+			if (temp.value > coolingSetpoint){
+				targetHeatingSetpoint = temp.value
+				targetCoolingSetpoint = temp.value
+			} else {
+				targetHeatingSetpoint = temp.value
+				targetCoolingSetpoint = coolingSetpoint
+			}
 		} else if (mode == "cool") {
-			sendEvent("name": "thermostatSetpoint", "value": coolingSetpoint.toString(), displayed: false)
+			//enforce limits before sending request to cloud
+			if (temp.value < heatingSetpoint){
+				targetHeatingSetpoint = temp.value
+				targetCoolingSetpoint = temp.value
+			} else {
+				targetHeatingSetpoint = heatingSetpoint
+				targetCoolingSetpoint = temp.value
+			}
 		}
+
+		log.debug "alterSetpoint >> in mode ${mode} trying to change heatingSetpoint to $targetHeatingSetpoint " +
+				"coolingSetpoint to $targetCoolingSetpoint with holdType : ${holdType}"
+
+		def sendHoldType = holdType ? (holdType=="Temporary")? "nextTransition" : (holdType=="Permanent")? "indefinite" : "indefinite" : "indefinite"
+
+		def coolingValue = location.temperatureScale == "C"? convertCtoF(targetCoolingSetpoint) : targetCoolingSetpoint
+		def heatingValue = location.temperatureScale == "C"? convertCtoF(targetHeatingSetpoint) : targetHeatingSetpoint
+
+		if (parent.setHold(heatingValue, coolingValue, deviceId, sendHoldType)) {
+			sendEvent("name": "thermostatSetpoint", "value": temp.value, displayed: false)
+			sendEvent("name": "heatingSetpoint", "value": targetHeatingSetpoint, "unit": location.temperatureScale)
+			sendEvent("name": "coolingSetpoint", "value": targetCoolingSetpoint, "unit": location.temperatureScale)
+			log.debug "alterSetpoint in mode $mode succeed change setpoint to= ${temp.value}"
+		} else {
+			log.error "Error alterSetpoint()"
+			if (mode == "heat" || mode == "auxHeatOnly"){
+				sendEvent("name": "thermostatSetpoint", "value": heatingSetpoint.toString(), displayed: false)
+			} else if (mode == "cool") {
+				sendEvent("name": "thermostatSetpoint", "value": coolingSetpoint.toString(), displayed: false)
+			}
+		}
+		generateStatusEvent()
 	}
-	generateStatusEvent()
 }
 
 def generateStatusEvent() {

devicetypes/smartthings/foscam.src/foscam.groovy

@@ -189,4 +189,4 @@ private calcDigestAuth(String method, String uri) {
 	def response = hashMD5("${HA1}::::auth:${HA2}")
 
 	'Digest username="'+ getUsername() + '", realm="", nonce="", uri="'+ uri +'", qop=auth, nc=, cnonce="", response="' + response + '", opaque=""'
-}
+}

devicetypes/smartthings/hue-bloom.src/hue-bloom.groovy

@@ -57,7 +57,7 @@ metadata {
 }
 
 void installed() {
-	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan"], displayed: false)
+	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan", hubHardwareId: device.hub.hardwareID], displayed: false)
 }
 
 // parse events into attributes

devicetypes/smartthings/hue-bulb.src/hue-bulb.groovy

@@ -66,7 +66,7 @@ metadata {
 }
 
 void installed() {
-	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan"], displayed: false)
+	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan", hubHardwareId: device.hub.hardwareID], displayed: false)
 }
 
 // parse events into attributes

devicetypes/smartthings/hue-lux-bulb.src/hue-lux-bulb.groovy

@@ -50,7 +50,7 @@ metadata {
 }
 
 void installed() {
-	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan"], displayed: false)
+	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan", hubHardwareId: device.hub.hardwareID], displayed: false)
 }
 
 // parse events into attributes

devicetypes/smartthings/hue-white-ambiance-bulb.src/hue-white-ambiance-bulb.groovy

@@ -55,7 +55,7 @@ metadata {
 }
 
 void installed() {
-	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan"], displayed: false)
+	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan", hubHardwareId: device.hub.hardwareID], displayed: false)
 }
 
 // parse events into attributes

devicetypes/smartthings/nyce-open-closed-sensor.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/nyce-open-closed-sensor.src/README.md

@@ -0,0 +1,37 @@
+# Nyce Door/Window Sensor (Open/Close Sensor)
+
+
+
+Works with:
+
+* [NYCE Door/Window Sensor NCZ-3011](https://support.smartthings.com/hc/en-us/articles/204576764-NYCE-Door-Window-Sensor)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Battery](#battery-specification)
+* [Troubleshooting](#troubleshooting)
+
+## Capabilities
+
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Contact Sensor** - can detect contact (with possible values - open/closed)
+* **Battery** - defines device uses a battery
+* **Refresh** - _refresh()_ command for status updates
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+A Category C2 Nyce Door/Window sensor that has 12min check-in interval
+
+## Battery Specification
+
+One 3V CR2032 battery required.
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the sensor is out of range.
+Pairing needs to be tried again by placing the sensor closer to the hub.
+Instructions related to pairing, resetting and removing the sensor from SmartThings can be found in the following link:
+* [Nyce Door/Window Sensor](https://support.smartthings.com/hc/en-us/articles/204576764-NYCE-Door-Window-Sensor)

devicetypes/smartthings/nyce-open-closed-sensor.src/nyce-open-closed-sensor.groovy

@@ -19,25 +19,26 @@ import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
 metadata {
 	definition (name: "NYCE Open/Closed Sensor", namespace: "smartthings", author: "NYCE") {
-    	capability "Battery"
+		capability "Battery"
 		capability "Configuration"
-        capability "Contact Sensor"
+		capability "Contact Sensor"
 		capability "Refresh"
-        
+		capability "Health Check"
-        command "enrollResponse"
+
- 
+		command "enrollResponse"
- 
+
- 		fingerprint inClusters: "0000,0001,0003,0500,0020", manufacturer: "NYCE", model: "3010", deviceJoinName: "NYCE Door Hinge Sensor"
+
+		fingerprint inClusters: "0000,0001,0003,0500,0020", manufacturer: "NYCE", model: "3010", deviceJoinName: "NYCE Door Hinge Sensor"
 		fingerprint inClusters: "0000,0001,0003,0406,0500,0020", manufacturer: "NYCE", model: "3011", deviceJoinName: "NYCE Door/Window Sensor"
-        fingerprint inClusters: "0000,0001,0003,0500,0020", manufacturer: "NYCE", model: "3011", deviceJoinName: "NYCE Door/Window Sensor"
+		fingerprint inClusters: "0000,0001,0003,0500,0020", manufacturer: "NYCE", model: "3011", deviceJoinName: "NYCE Door/Window Sensor"
-        fingerprint inClusters: "0000,0001,0003,0406,0500,0020", manufacturer: "NYCE", model: "3014", deviceJoinName: "NYCE Tilt Sensor"
+		fingerprint inClusters: "0000,0001,0003,0406,0500,0020", manufacturer: "NYCE", model: "3014", deviceJoinName: "NYCE Tilt Sensor"
-        fingerprint inClusters: "0000,0001,0003,0500,0020", manufacturer: "NYCE", model: "3014", deviceJoinName: "NYCE Tilt Sensor"
+		fingerprint inClusters: "0000,0001,0003,0500,0020", manufacturer: "NYCE", model: "3014", deviceJoinName: "NYCE Tilt Sensor"
 	}
- 
+
 	simulator {
- 
+
 	}
- 
+
 	tiles {
 		standardTile("contact", "device.contact", width: 2, height: 2) {
 			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
@@ -273,23 +274,28 @@ private List parseIasMessage(String description) {
 	return resultListMap
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+	return zigbee.readAttribute(0x001, 0x0020) // Read the Battery Level
+}
+
 def configure() {
+	// Device-Watch allows 2 check-in misses from device
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 
-	def configCmds = [
+	def enrollCmds = [
-			//battery reporting and heartbeat
-			"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 1 {${device.zigbeeId}} {}", "delay 200",
-			"zcl global send-me-a-report 1 0x20 0x20 600 3600 {01}", "delay 200",
-			"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 1500",
-
-
 			// Writes CIE attribute on end device to direct reports to the hub's EUID
 			"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
 			"send 0x${device.deviceNetworkId} 1 1", "delay 500",
 	]
 
 	log.debug "configure: Write IAS CIE"
-	return configCmds
+	// battery minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
+	return enrollCmds + zigbee.batteryConfig(30, 300) + refresh() // send refresh cmds as part of config
 }
 
 def enrollResponse() {
@@ -334,7 +340,8 @@ Integer convertHexToInt(hex) {
 
 def refresh() {
 	log.debug "Refreshing Battery"
-	[
+	def refreshCmds = [
 			"st rattr 0x${device.deviceNetworkId} ${endpointId} 1 0x20", "delay 200"
 	]
+	return refreshCmds + enrollResponse()
 }

devicetypes/smartthings/smartpower-outlet.src/smartpower-outlet.groovy

@@ -16,7 +16,7 @@
 
 metadata {
 	// Automatically generated. Make future change here.
-	definition (name: "SmartPower Outlet", namespace: "smartthings", author: "SmartThings", category: "C1") {
+	definition (name: "SmartPower Outlet", namespace: "smartthings", author: "SmartThings") {
 		capability "Actuator"
 		capability "Switch"
 		capability "Power Meter"
@@ -129,7 +129,7 @@ def refresh() {
 
 def configure() {
 	// Device-Watch allows 2 check-in misses from device
-	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 	// OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
 	zigbee.onOffConfig(0, 300) + powerConfig() + refresh()
 }

devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy

@@ -17,7 +17,7 @@ import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
 
 metadata {
-	definition (name: "SmartSense Moisture Sensor",namespace: "smartthings", author: "SmartThings", category: "C2") {
+	definition (name: "SmartSense Moisture Sensor",namespace: "smartthings", author: "SmartThings") {
 		capability "Configuration"
 		capability "Battery"
 		capability "Refresh"
@@ -293,7 +293,7 @@ def refresh() {
 
 def configure() {
 	// Device-Watch allows 2 check-in misses from device
-	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -17,7 +17,7 @@ import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
 
 metadata {
-	definition (name: "SmartSense Motion Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
+	definition (name: "SmartSense Motion Sensor", namespace: "smartthings", author: "SmartThings") {
 		capability "Motion Sensor"
 		capability "Configuration"
 		capability "Battery"
@@ -304,7 +304,7 @@ def refresh() {
 
 def configure() {
 	// Device-Watch allows 2 check-in misses from device
-	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -16,7 +16,7 @@
 import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
 metadata {
-	definition (name: "SmartSense Multi Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
+	definition (name: "SmartSense Multi Sensor", namespace: "smartthings", author: "SmartThings") {
 
 		capability "Three Axis"
 		capability "Battery"
@@ -402,7 +402,7 @@ def refresh() {
 
 def configure() {
 	// Device-Watch allows 2 check-in misses from device
-	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
 	log.debug "Configuring Reporting"
 

devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy

@@ -16,7 +16,7 @@
 import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
 metadata {
-	definition (name: "SmartSense Open/Closed Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
+	definition (name: "SmartSense Open/Closed Sensor", namespace: "smartthings", author: "SmartThings") {
 		capability "Battery"
 		capability "Configuration"
 		capability "Contact Sensor"
@@ -256,7 +256,7 @@ def refresh() {
 
 def configure() {
 	// Device-Watch allows 2 check-in misses from device
-	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy

@@ -14,7 +14,7 @@
  *
  */
 metadata {
-	definition (name: "SmartSense Temp/Humidity Sensor",namespace: "smartthings", author: "SmartThings", category: "C2") {
+	definition (name: "SmartSense Temp/Humidity Sensor",namespace: "smartthings", author: "SmartThings") {
 		capability "Configuration"
 		capability "Battery"
 		capability "Refresh"
@@ -265,7 +265,7 @@ def refresh()
 
 def configure() {
 	// Device-Watch allows 2 check-in misses from device
-	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
 	log.debug "Configuring Reporting and Bindings."
 	def humidityConfigCmds = [

devicetypes/smartthings/tyco-door-window-sensor.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/tyco-door-window-sensor.src/README.md

@@ -0,0 +1,42 @@
+# Tyco Door Window Sensor
+
+
+
+Works with: 
+
+* [Tyco Door Window Sensor](https://support.smartthings.com/hc/en-us/articles/204834100-Tyco-Door-Window-Sensor)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Battery](#battery-specification)
+
+## Capabilities
+
+* **Battery** - defines device uses a battery
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Contact Sensor** - can detect contact (open/close)
+* **Refresh** - _refresh()_ command for status updates
+* **Temperature Measurement** - can measure the device temperature
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+Contact sensor with maxReportTime of 5 mins.
+Check-in interval is double the value of maxReportTime for Zigbee device. 
+This gives the device twice the amount of time to respond before it is marked as offline.
+Check-in interval = 12 min
+
+## Battery Specification
+
+3V CR2032 battery is required.
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that either the sensor needs to be reseted or the sensor is out of range.
+Reset needs to be done by inserting the battery in the sensor and then quickly pressing the adjacent black button 10 times. Pairing should be tried again now.
+It may happen that sensor is out of range, then pairing needs to be tried again by placing the sensor closer to the hub.
+Instructions related to pairing, resetting and removing the different motion sensors from SmartThings can be found in the following links
+for the different models:
+* [Tyco Door Window Sensor (MCT-340)](https://support.smartthings.com/hc/en-us/articles/204834100-Tyco-Door-Window-Sensor)

devicetypes/smartthings/tyco-door-window-sensor.src/tyco-door-window-sensor.groovy

@@ -22,6 +22,7 @@ metadata {
 		capability "Contact Sensor"
 		capability "Refresh"
 		capability "Temperature Measurement"
+		capability "Health Check"
 
 		command "enrollResponse"
 
@@ -229,44 +230,42 @@ private Map getContactResult(value) {
 	]
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+	return zigbee.readAttribute(0x0402, 0x0000) // Read the Temperature Cluster
+}
+
 def refresh()
 {
 	log.debug "Refreshing Temperature and Battery"
-	[
+	def refreshCmds = [
 
         "st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
 		"st rattr 0x${device.deviceNetworkId} 1 1 0x20"
 
 	]
+
+	return refreshCmds + enrollResponse()
 }
 
 def configure() {
+	// Device-Watch allows 2 check-in misses from device
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 		log.debug "Configuring Reporting, IAS CIE, and Bindings."
-	def configCmds = [
+	def enrollCmds = [
     	"delay 1000",
 
 		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 1", "delay 1500",
 
-        "zcl global send-me-a-report 1 0x20 0x20 600 3600 {01}", "delay 200",
-        "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-
-        "zcl global send-me-a-report 0x402 0 0x29 300 3600 {6400}", "delay 200",
-        "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-
-
         //"raw 0x500 {01 23 00 00 00}", "delay 200",
         //"send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-
-
-		"zdo bind 0x${device.deviceNetworkId} 1 1 0x402 {${device.zigbeeId}} {}", "delay 500",
-		"zdo bind 0x${device.deviceNetworkId} 1 1 1 {${device.zigbeeId}} {}",
-
-        "delay 500"
 	]
-    return configCmds + enrollResponse() + refresh() // send refresh cmds as part of config
+    return enrollCmds + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) + refresh() // send refresh cmds as part of config
 }
 
 def enrollResponse() {

devicetypes/smartthings/zigbee-dimmer.src/zigbee-dimmer.groovy

@@ -13,7 +13,7 @@
  */
 
 metadata {
-    definition (name: "ZigBee Dimmer", namespace: "smartthings", author: "SmartThings", category: "C1") {
+    definition (name: "ZigBee Dimmer", namespace: "smartthings", author: "SmartThings") {
         capability "Actuator"
         capability "Configuration"
         capability "Refresh"
@@ -90,7 +90,7 @@ def refresh() {
 def configure() {
     log.debug "Configuring Reporting and Bindings."
     // Device-Watch allows 2 check-in misses from device
-    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
+    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
     // OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
     zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
 }

devicetypes/smartthings/zigbee-rgbw-bulb.src/zigbee-rgbw-bulb.groovy

@@ -17,7 +17,7 @@
  */
 
 metadata {
-    definition (name: "ZigBee RGBW Bulb", namespace: "smartthings", author: "SmartThings", category: "C6") {
+    definition (name: "ZigBee RGBW Bulb", namespace: "smartthings", author: "SmartThings") {
 
         capability "Actuator"
         capability "Color Control"
@@ -134,7 +134,7 @@ def refresh() {
 def configure() {
     log.debug "Configuring Reporting and Bindings."
     // Device-Watch allows 2 check-in misses from device
-    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
+    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
     // OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
     zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01) + zigbee.readAttribute(0x0006, 0x00) + zigbee.readAttribute(0x0008, 0x00) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, 0x00) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }

devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/zigbee-white-color-temperature-bulb.groovy

@@ -17,7 +17,7 @@
  */
 
 metadata {
-    definition (name: "ZigBee White Color Temperature Bulb", namespace: "smartthings", author: "SmartThings", category: "C1") {
+    definition (name: "ZigBee White Color Temperature Bulb", namespace: "smartthings", author: "SmartThings") {
 
         capability "Actuator"
         capability "Color Temperature"
@@ -114,7 +114,7 @@ def refresh() {
 def configure() {
     log.debug "Configuring Reporting and Bindings."
     // Device-Watch allows 2 check-in misses from device
-    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
+    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
     // OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
     zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
 }

smartapps/smartthings/logitech-harmony-connect.src/logitech-harmony-connect.groovy

@@ -362,7 +362,7 @@ Map discoverDevices() {
             def hubname = getHubName(it.key)
             def hubvalue = "${hubname}"
             hubs["harmony-${hubkey}"] = hubvalue
-        	it.value.response.data.activities.each {
+        	  it.value.response.data.activities.each {
                 def value = "${it.value.name}"
                 def key = "harmony-${hubkey}-${it.key}"
                 activities["${key}"] = value
@@ -461,22 +461,11 @@ def activityResponse(response, data) {
       log.warn "Logitech Harmony - Access token has expired"
     }
   } else {
-    def ResponseValues
+    if (response.status == 200) {
-    try {
+      log.trace "Command sent succesfully"
-      // json response already parsed into JSONElement object
+      poll()
-      ResponseValues = response.json
-    } catch (e) {
-      log.error "Logitech Harmony - error parsing json from response: $e"
-    }
-    if (ResponseValues) {
-      if (ResponseValues.code == 200) {
-        log.trace "Command sent succesfully"
-        poll()
-      } else {
-        log.trace "Command failed. Error: $response.data.code"
-      }
     } else {
-      log.debug "Logitech Harmony - did not get json results from response body: $response.data"
+      log.trace "Command failed. Error: $response.status"
     }
   }
 }
@@ -484,7 +473,6 @@ def activityResponse(response, data) {
 def poll() {
 	// GET THE LIST OF ACTIVITIES
     if (state.HarmonyAccessToken) {
-    	  getActivityList()
         def tokenParam = [auth: state.HarmonyAccessToken]
         def params = [
             uri: "https://home.myharmony.com/cloudapi/state?${toQueryString(tokenParam)}",
@@ -493,7 +481,7 @@ def poll() {
         ]
         asynchttp_v1.get('pollResponse', params)
       } else {
-          log.warn "Logitech Harmony - Access token has expired"
+        log.warn "Logitech Harmony - Access token has expired"
       }
 }
 
@@ -522,7 +510,12 @@ def pollResponse(response, data) {
                   if (it.value.response.data.currentAvActivity == "-1") {
                       hub.sendEvent(name: "currentActivity", value: "--", descriptionText: "There isn't any activity running", display: false)
                   } else {
-                      def currentActivity = getChildDevice("harmony-${it.key}-${it.value.response.data.currentAvActivity}").device.displayName
+                      def currentActivity
+                      def activityDTH = getChildDevice("harmony-${it.key}-${it.value.response.data.currentAvActivity}")
+                      if (activityDTH)
+                        currentActivity = activityDTH.device.displayName
+                      else
+                        currentActivity = getActivityName(it.value.response.data.currentAvActivity,it.key)
                       hub.sendEvent(name: "currentActivity", value: currentActivity, descriptionText: "Current activity is ${currentActivity}", display: false)
                   }
               }
@@ -557,58 +550,6 @@ def pollResponse(response, data) {
 	}
 }
 
-def getActivityList() {
-    if (state.HarmonyAccessToken) {
-      def tokenParam = [auth: state.HarmonyAccessToken]
-      def params = [
-  				uri: "https://home.myharmony.com/cloudapi/activity/all?${toQueryString(tokenParam)}",
-  				headers: ["Accept": "application/json"],
-  				contentType: 'application/json'
-  		]
-  		asynchttp_v1.get('activityListResponse', params)
-    } else {
-        log.warn "Logitech Harmony - Access token has expired"
-    }
-}
-
-def activityListResponse(response, data) {
-	if (response.hasError()) {
-			log.error "Logitech Harmony - response has error: $response.errorMessage"
-      if (response.status == 401) { // token is expired
-          state.remove("HarmonyAccessToken")
-          log.warn "Logitech Harmony - Access token has expired"
-      }
-	} else {
-			def ResponseValues
-			try {
-					// json response already parsed into JSONElement object
-					ResponseValues = response.json
-			} catch (e) {
-					log.error "Logitech Harmony - error parsing json from response: $e"
-			}
-			if (ResponseValues) {
-          	  ResponseValues.hubs.each {
-              def hub = getChildDevice("harmony-${it.key}")
-              if (hub) {
-                def hubname = getHubName("${it.key}")
-                  def activities = []
-                  def aux = it.value.response?.data.activities.size()
-                  if (aux >= 1) {
-                      activities = it.value.response.data.activities.collect {
-                          [id: it.key, name: it.value['name'], type: it.value['type']]
-                      }
-                      activities += [id: "off", name: "Activity OFF", type: "0"]
-                      log.trace activities
-                  }
-                  hub.sendEvent(name: "activities", value: new groovy.json.JsonBuilder(activities).toString(), descriptionText: "Activities are ${activities.collect { it.name }?.join(', ')}", display: false)
-              }
-          }
-			} else {
-					log.debug "Logitech Harmony - did not get json results from response body: $response.data"
-			}
-	}
-}
-
 def getActivityName(activity,hubId) {
 	// GET ACTIVITY'S NAME
     def actname = activity