MSA-1799: ZWave Switch

[DVCSMP-2433] Device Filtering change for Z-wave devices

devicetypes/smartthings/lifx-color-bulb.src/lifx-color-bulb.groovy

@@ -14,6 +14,7 @@ metadata {
 		capability "Refresh"
 		capability "Sensor"
 		capability "Health Check"
+		capability "Light"
 	}
 
 	simulator {

devicetypes/smartthings/lifx-white-bulb.src/lifx-white-bulb.groovy

@@ -13,6 +13,7 @@ metadata {
 		capability "Refresh"
 		capability "Sensor"
 		capability "Health Check"
+		capability "Light"
 	}
 
 	simulator {

devicetypes/smartthings/mimolite-garage-door-controller.src/mimolite-garage-door-controller.groovy

@@ -36,6 +36,7 @@ metadata {
 		capability "Switch"
 		capability "Refresh"
 		capability "Contact Sensor"
+		capability "Light"
 
 		attribute "powered", "string"
 

devicetypes/smartthings/zigbee-dimmer-power.src/README.md

@@ -23,6 +23,7 @@ Works with:
 * **Switch** - can detect state (possible values: on/off)
 * **Switch Level** - represents current light level, usually 0-100 in percent
 * **Health Check** - indicates ability to get device health notifications
+* **Light** - indicates that the device belongs to Light category.
 
 ## Device Health
 

devicetypes/smartthings/zigbee-dimmer-power.src/zigbee-dimmer-power.groovy

@@ -22,6 +22,7 @@ metadata {
         capability "Switch"
         capability "Switch Level"
         capability "Health Check"
+        capability "Light"
 
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0B04"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0008, 0702"

devicetypes/smartthings/zigbee-switch-power.src/zigbee-switch-power.groovy

@@ -21,6 +21,7 @@ metadata {
         capability "Sensor"
         capability "Switch"
         capability "Health Check"
+        capability "Light"
 
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0B04"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0702"

devicetypes/smartthings/zwave-dimmer-switch-generic.src/README.md

@@ -6,6 +6,12 @@ Works with:
 
 * [Leviton Plug-in Lamp Dimmer Module (DZPD3-1LW)](https://www.smartthings.com/works-with-smartthings/outlets/leviton-plug-in-lamp-dimmer-module)
 * [Leviton Universal Dimmer (DZMX1-LZ)](https://www.smartthings.com/works-with-smartthings/switches-and-dimmers/leviton-universal-dimmer)
+* [Leviton 1000W Incandescent Dimmer](https://www.smartthings.com/works-with-smartthings/leviton/leviton-1000w-incandescent-dimmer)
+* [Leviton 600W Incandescent Dimmer](https://www.smartthings.com/works-with-smartthings/leviton/leviton-600w-incandescent-dimmer)
+* [Enerwave In-Wall Dimmer](https://www.smartthings.com/works-with-smartthings/enerwave/enerwave-in-wall-dimmer-zw500d)
+* [Leviton 3-Speed Fan Controller](https://www.smartthings.com/works-with-smartthings/leviton/leviton-3-speed-fan-controller)
+* [Leviton Magnetic Low Voltage Dimmer](https://www.smartthings.com/works-with-smartthings/leviton/leviton-magnetic-low-voltage-dimmer)
+* [Remotec Technology Plug-In Dimmer](https://www.smartthings.com/works-with-smartthings/remotec-technology/remotec-technology-plug-in-dimmer)
 
 ## Table of contents
 
@@ -40,4 +46,9 @@ If the device doesn't pair when trying from the SmartThings mobile app, it is po
 Pairing needs to be tried again by placing the device closer to the hub.
 Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
 * [Leviton Plug-in Lamp Dimmer Module (DZPD3-1LW) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206171053-How-to-connect-Leviton-Z-Wave-devices)
-* [Leviton Universal Dimmer (DZMX1-LZ) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206171053-How-to-connect-Leviton-Z-Wave-devices)
+* [Leviton Universal Dimmer (DZMX1-LZ) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206171053-How-to-connect-Leviton-Z-Wave-devices)
+* [Leviton 1000W Incandescent Dimmer Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206171053-How-to-connect-Leviton-Z-Wave-devices)
+* [Leviton 600W Incandescent Dimmer Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206171053-How-to-connect-Leviton-Z-Wave-devices)
+* [Leviton 3-Speed Fan Controller Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206171053-How-to-connect-Leviton-Z-Wave-devices)
+* [Enerwave In-Wall Dimmer Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/204854176-How-to-connect-Enerwave-switches-and-dimmers)
+* [Remotec Technology Plug-In Dimmer Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/202295150-Remotec-Technology-Plug-In-Dimmer-ZDS-100-)

devicetypes/smartthings/zwave-dimmer-switch-generic.src/zwave-dimmer-switch-generic.groovy

@@ -20,6 +20,7 @@ metadata {
 		capability "Polling"
 		capability "Refresh"
 		capability "Sensor"
+		capability "Light"
 
 		fingerprint inClusters: "0x26", deviceJoinName: "Z-Wave Dimmer"
 		fingerprint mfr:"001D", prod:"1902", deviceJoinName: "Z-Wave Dimmer"
@@ -28,6 +29,8 @@ metadata {
 		fingerprint mfr:"001D", prod:"1001", model:"0334", deviceJoinName: "Leviton 3-Speed Fan Controller"
 		fingerprint mfr:"001D", prod:"0602", model:"0334", deviceJoinName: "Leviton Magnetic Low Voltage Dimmer"
 		fingerprint mfr:"001D", prod:"0401", model:"0334", deviceJoinName: "Leviton 600W Incandescent Dimmer"
+		fingerprint mfr:"0111", prod:"8200", model:"0200", deviceJoinName: "Remotec Technology Plug-In Dimmer"
+		fingerprint mfr:"1104", prod:"001D", model:"0501", deviceJoinName: "Leviton 1000W Incandescant Dimmer"
 	}
 
 	simulator {

devicetypes/smartthings/zwave-metering-dimmer.src/zwave-metering-dimmer.groovy

@@ -25,6 +25,7 @@ metadata {
 		capability "Switch Level"
 		capability "Sensor"
 		capability "Actuator"
+		capability "Light"
 
 		command "reset"
 

devicetypes/smartthings/zwave-metering-switch.src/zwave-metering-switch.groovy

@@ -21,6 +21,7 @@ metadata {
 		capability "Refresh"
 		capability "Configuration"
 		capability "Sensor"
+		capability "Light"
 
 		command "reset"
 

devicetypes/smartthings/zwave-switch-generic.src/zwave-switch-generic.groovy

@@ -19,6 +19,7 @@ metadata {
 		capability "Polling"
 		capability "Refresh"
 		capability "Sensor"
+		capability "Light"
 
 		fingerprint inClusters: "0x25", deviceJoinName: "Z-Wave Switch"
 		fingerprint mfr:"001D", prod:"1A02", model:"0334", deviceJoinName: "Leviton Appliance Module"
@@ -26,6 +27,8 @@ metadata {
 		fingerprint mfr:"001D", prod:"1D04", model:"0334", deviceJoinName: "Leviton Outlet"
 		fingerprint mfr:"001D", prod:"1C02", model:"0334", deviceJoinName: "Leviton Switch"
 		fingerprint mfr:"001D", prod:"0301", model:"0334", deviceJoinName: "Leviton 15A Switch"
+		fingerprint mfr:"001D", prod:"0F01", model:"0334", deviceJoinName: "Leviton 5A Incandescent Switch"
+		fingerprint mfr:"001D", prod:"1603", model:"0334", deviceJoinName: "Leviton 15A Split Duplex Receptacle"
 		fingerprint mfr:"011A", prod:"0101", model:"0102", deviceJoinName: "Enerwave On/Off Switch"
 		fingerprint mfr:"011A", prod:"0101", model:"0603", deviceJoinName: "Enerwave Duplex Receptacle"
 	}

devicetypes/smartthings/zwave-switch.src/zwave-switch.groovy

@@ -20,6 +20,7 @@ metadata {
 		capability "Refresh"
 		capability "Sensor"
 		capability "Health Check"
+		capability "Light"
 
 		fingerprint mfr:"0063", prod:"4952", deviceJoinName: "Z-Wave Wall Switch"
 		fingerprint mfr:"0063", prod:"5257", deviceJoinName: "Z-Wave Wall Switch"

smartapps/lightenginernd/web-services-smartapp.src/web-services-smartapp.groovy

@@ -0,0 +1,95 @@
+/**
+ *  Web Services SmartApp
+ *
+ *  Copyright 2017 Light Engine R&D
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+definition(
+    name: "Web Services SmartApp",
+    namespace: "lightenginernd",
+    author: "Light Engine R&D",
+    description: "Web Services SmartApp 1st",
+    category: "",
+    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
+    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
+    oauth: [displayName: "Web Services SmartApp", displayLink: "http://localhost:4567"]
+)
+
+preferences {
+  section ("Allow external service to control these things...") {
+    input "switches", "capability.switch", multiple: true, required: true
+  }
+}
+
+mappings {
+  path("/switches") {
+    action: [
+      GET: "listSwitches"
+    ]
+  }
+  path("/switches/:command") {
+    action: [
+      PUT: "updateSwitches"
+    ]
+  }
+}
+
+// returns a list like
+// [[name: "kitchen lamp", value: "off"], [name: "bathroom", value: "on"]]
+def listSwitches() {
+
+    def resp = []
+    switches.each {
+        resp << [name: it.displayName, value: it.currentValue("switch")]
+    }
+    return resp
+}
+
+void updateSwitches() {
+    // use the built-in request object to get the command parameter
+    def command = params.command
+
+    // all switches have the comand
+    // execute the command on all switches
+    // (note we can do this on the array - the command will be invoked on every element
+    switch(command) {
+        case "on":
+            switches.on()
+            break
+        case "off":
+            switches.off()
+            break
+        default:
+            httpError(400, "$command is not a valid command for all switches specified")
+    }
+
+}
+
+def installed() {
+	log.debug "Installed with settings: ${settings}"
+
+	initialize()
+}
+
+def updated() {
+	log.debug "Updated with settings: ${settings}"
+
+	unsubscribe()
+	initialize()
+}
+
+def initialize() {
+	// TODO: subscribe to attributes, devices, locations, etc.
+}
+
+// TODO: implement event handlers