Merge pull request #1881 from bflorian/SAPLAT-41-composite-refrigerator-example

SAPLAT-41 added simulated refrigerator composite device type example

devicetypes/fibargroup/fibaro-door-window-sensor-zw5-with-temperature.src/fibaro-door-window-sensor-zw5-with-temperature.groovy

@@ -14,7 +14,7 @@
  *
  */
 metadata {
-	definition (name: "Fibaro Door/Window Sensor ZW5 with Temperature", namespace: "fibargroup", author: "Fibar Group S.A.", ocfDeviceType: "x.com.st.d.sensor.contact") {
+	definition (name: "Fibaro Door/Window Sensor ZW5 with Temperature", namespace: "fibargroup", author: "Fibar Group S.A.") {
 		capability "Battery"
 		capability "Contact Sensor"
 		capability "Sensor"

devicetypes/fibargroup/fibaro-door-window-sensor-zw5.src/fibaro-door-window-sensor-zw5.groovy

@@ -14,7 +14,7 @@
  *
  */
 metadata {
-	definition (name: "Fibaro Door/Window Sensor ZW5", namespace: "fibargroup", author: "Fibar Group S.A.", ocfDeviceType: "x.com.st.d.sensor.contact") {
+	definition (name: "Fibaro Door/Window Sensor ZW5", namespace: "fibargroup", author: "Fibar Group S.A.") {
 		capability "Battery"
 		capability "Contact Sensor"
 		capability "Sensor"

devicetypes/fibargroup/fibaro-flood-sensor-zw5.src/fibaro-flood-sensor-zw5.groovy

@@ -14,7 +14,7 @@
  *
  */
 metadata {
-	definition (name: "Fibaro Flood Sensor ZW5", namespace: "fibargroup", author: "Fibar Group S.A.", ocfDeviceType: "x.com.st.d.sensor.moisture") {
+	definition (name: "Fibaro Flood Sensor ZW5", namespace: "fibargroup", author: "Fibar Group S.A.") {
 		capability "Battery"
 		capability "Configuration"
 		capability "Sensor"

devicetypes/fibargroup/fibaro-motion-sensor-zw5.src/fibaro-motion-sensor-zw5.groovy

@@ -14,7 +14,7 @@
  *
  */
 metadata {
-	definition (name: "Fibaro Motion Sensor ZW5", namespace: "fibargroup", author: "Fibar Group S.A.", ocfDeviceType: "x.com.st.d.sensor.motion") {
+	definition (name: "Fibaro Motion Sensor ZW5", namespace: "fibargroup", author: "Fibar Group S.A.") {
 		capability "Battery"
 		capability "Configuration"
 		capability "Illuminance Measurement"

devicetypes/smartthings/aeon-multisensor-gen5.src/aeon-multisensor-gen5.groovy

@@ -100,11 +100,6 @@ metadata {
 	}
 }
 
-def installed(){
-// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-}
-
 def updated(){
 // Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

devicetypes/smartthings/aeon-siren.src/aeon-siren.groovy

@@ -58,11 +58,6 @@ metadata {
  }
 }
 
-def installed() {
-// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-}
-
 def updated() {
 // Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

devicetypes/smartthings/cree-bulb.src/cree-bulb.groovy

@@ -15,7 +15,7 @@
  */
 
 metadata {
-    definition (name: "Cree Bulb", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
+    definition (name: "Cree Bulb", namespace: "smartthings", author: "SmartThings") {
 
         capability "Actuator"
         capability "Configuration"

devicetypes/smartthings/dimmer-switch.src/dimmer-switch.groovy

@@ -84,11 +84,6 @@ metadata {
 	}
 }
 
-def installed() {
-	// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-}
-
 def updated(){
 	// Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

devicetypes/smartthings/econet-vent.src/econet-vent.groovy

@@ -85,11 +85,6 @@ def parse(String description) {
     result
 }
 
-def installed() {
-	// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-}
-
 //send the command to stop polling
 def updated() {
 	// Device-Watch simply pings if no device events received for 32min(checkInterval)

devicetypes/smartthings/everspring-flood-sensor.src/everspring-flood-sensor.groovy

@@ -12,7 +12,7 @@
  *
  */
 metadata {
-	definition (name: "Everspring Flood Sensor", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "x.com.st.d.sensor.moisture") {
+	definition (name: "Everspring Flood Sensor", namespace: "smartthings", author: "SmartThings") {
 		capability "Water Sensor"
 		capability "Configuration"
 		capability "Sensor"

devicetypes/smartthings/fibaro-motion-sensor.src/fibaro-motion-sensor.groovy

@@ -38,7 +38,7 @@
  * @return none
  */
  metadata {
-	definition (name: "Fibaro Motion Sensor", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "x.com.st.d.sensor.motion") {
+	definition (name: "Fibaro Motion Sensor", namespace: "smartthings", author: "SmartThings") {
 		capability 	"Motion Sensor"
 		capability 	"Temperature Measurement"
 		capability 	"Acceleration Sensor"
@@ -436,3 +436,4 @@ def listCurrentParams() {
     
 	delayBetween(cmds, 500)
 }
+

devicetypes/smartthings/fortrezz-water-valve.src/fortrezz-water-valve.groovy

@@ -50,11 +50,6 @@ metadata {
 	}
 }
 
-def installed(){
-// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-}
-
 def updated(){
 // Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

devicetypes/smartthings/ge-link-bulb.src/ge-link-bulb.groovy

@@ -42,7 +42,7 @@
  */
 
 metadata {
-    definition (name: "GE Link Bulb", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
+    definition (name: "GE Link Bulb", namespace: "smartthings", author: "SmartThings") {
 
         capability "Actuator"
         capability "Configuration"

devicetypes/smartthings/hue-bloom.src/hue-bloom.groovy

@@ -57,18 +57,8 @@ metadata {
 	}
 }
 
-def initialize() {
-	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}", displayed: false)
-}
-
 void installed() {
-	log.debug "installed()"
+	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}", displayed: false)
-	initialize()
-}
-
-def updated() {
-	log.debug "updated()"
-	initialize()
 }
 
 // parse events into attributes

devicetypes/smartthings/hue-bridge.src/hue-bridge.groovy

@@ -45,18 +45,8 @@ metadata {
 	}
 }
 
-def initialize() {
-	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}", displayed: false)
-}
-
 void installed() {
-	log.debug "installed()"
+	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}", displayed: false)
-	initialize()
-}
-
-def updated() {
-	log.debug "updated()"
-	initialize()
 }
 
 // parse events into attributes

devicetypes/smartthings/hue-bulb.src/hue-bulb.groovy

@@ -66,18 +66,8 @@ metadata {
 	}
 }
 
-def initialize() {
-	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}", displayed: false)
-}
-
 void installed() {
-	log.debug "installed()"
+	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}", displayed: false)
-	initialize()
-}
-
-def updated() {
-	log.debug "updated()"
-	initialize()
 }
 
 // parse events into attributes

devicetypes/smartthings/hue-lux-bulb.src/hue-lux-bulb.groovy

@@ -50,17 +50,8 @@ metadata {
     }
 }
 
-def initialize() {
-	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}", displayed: false)
-}
-
 void installed() {
-	log.debug "installed()"
+	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}", displayed: false)
-	initialize()
-}
-
-def updated() {
-	initialize()
 }
 
 // parse events into attributes

devicetypes/smartthings/hue-white-ambiance-bulb.src/hue-white-ambiance-bulb.groovy

@@ -55,18 +55,8 @@ metadata {
     }
 }
 
-def initialize() {
-	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}", displayed: false)
-}
-
 void installed() {
-    log.debug "installed()"
+	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}", displayed: false)
-    initialize()
-}
-
-def updated() {
-    log.debug "updated()"
-    initialize()
 }
 
 // parse events into attributes

devicetypes/smartthings/lifx-color-bulb.src/lifx-color-bulb.groovy

@@ -5,7 +5,7 @@
  *
  */
 metadata {
-	definition (name: "LIFX Color Bulb", namespace: "smartthings", author: "LIFX", ocfDeviceType: "oic.d.light") {
+	definition (name: "LIFX Color Bulb", namespace: "smartthings", author: "LIFX") {
 		capability "Actuator"
 		capability "Color Control"
 		capability "Color Temperature"
@@ -64,18 +64,8 @@ metadata {
 	}
 }
 
-def initialize() {
-	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"cloud\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device?.hub?.hardwareID}\"}", displayed: false)
-}
-
 void installed() {
-	log.debug "installed()"
+	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"cloud\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device?.hub?.hardwareID}\"}")
-	initialize()
-}
-
-def updated() {
-	log.debug "updated()"
-	initialize()
 }
 
 // handle commands

devicetypes/smartthings/lifx-white-bulb.src/lifx-white-bulb.groovy

@@ -5,7 +5,7 @@
  *
  */
 metadata {
-	definition (name: "LIFX White Bulb", namespace: "smartthings", author: "LIFX", ocfDeviceType: "oic.d.light") {
+	definition (name: "LIFX White Bulb", namespace: "smartthings", author: "LIFX") {
 		capability "Actuator"
 		capability "Color Temperature"
 		capability "Switch"
@@ -55,18 +55,8 @@ metadata {
 	}
 }
 
-def initialize() {
-	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"cloud\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device?.hub?.hardwareID}\"}", displayed: false)
-}
-
 void installed() {
-	log.debug "installed()"
+	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"cloud\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device?.hub?.hardwareID}\"}")
-	initialize()
-}
-
-def updated() {
-	log.debug "updated()"
-	initialize()
 }
 
 // handle commands

devicetypes/smartthings/logitech-harmony-hub-c2c.src/logitech-harmony-hub-c2c.groovy

@@ -1,4 +1,3 @@
-import groovy.json.JsonOutput
 /**
  *  Logitech Harmony Hub
  *
@@ -40,18 +39,14 @@ metadata {
 	}
 }
 
-def initialize() {
-	sendEvent(name: "DeviceWatch-Enroll", value: JsonOutput.toJson([protocol: "cloud", scheme:"untracked"]), displayed: false)
-}
-
 def installed() {
 	log.debug "installed()"
-	initialize()
+	sendEvent(name: "DeviceWatch-Enroll", value: JsonOutput.toJson([protocol: "cloud", scheme:"untracked"]), displayed: false)
 }
 
 def updated() {
 	log.debug "updated()"
-	initialize()
+	sendEvent(name: "DeviceWatch-Enroll", value: JsonOutput.toJson([protocol: "cloud", scheme:"untracked"]), displayed: false)
 }
 
 def startActivity(String activityId) {

devicetypes/smartthings/open-closed-sensor.src/open-closed-sensor.groovy

@@ -12,7 +12,7 @@
  *
  */
 metadata {
-	definition (name: "Open/Closed Sensor", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "x.com.st.d.sensor.contact") {
+	definition (name: "Open/Closed Sensor", namespace: "smartthings", author: "SmartThings") {
 		capability "Contact Sensor"
 		capability "Sensor"
 

devicetypes/smartthings/rgbw-light.src/rgbw-light.groovy

@@ -17,7 +17,7 @@
  */
 
 metadata {
-	definition (name: "RGBW Light", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
+	definition (name: "RGBW Light", namespace: "smartthings", author: "SmartThings") {
 		capability "Switch Level"
 		capability "Color Control"
 		capability "Color Temperature"

devicetypes/smartthings/smartsense-moisture.src/smartsense-moisture.groovy

@@ -91,11 +91,6 @@ def parse(String description) {
 	return result
 }
 
-def installed() {
-	// Device-Watch simply pings if no device events received for 482min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 4 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-}
-
 def updated() {
 	// Device-Watch simply pings if no device events received for 482min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 4 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

devicetypes/smartthings/sylvania-ultra-iq.src/sylvania-ultra-iq.groovy

@@ -15,7 +15,7 @@
 //DEPRECATED - Using the generic DTH for this device. Users need to be moved before deleting this DTH
 
 metadata {
-	definition (name: "Sylvania Ultra iQ", namespace:"smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
+	definition (name: "Sylvania Ultra iQ", namespace:"smartthings", author: "SmartThings") {
 		capability "Switch Level"
 		capability "Configuration"
 		capability "Switch"

devicetypes/smartthings/testing/simulated-refrigerator-door.src/simulated-refrigerator-door.groovy

@@ -0,0 +1,57 @@
+/**
+ *  Copyright 2017 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Simulated Refrigerator Door", namespace: "smartthings/testing", author: "SmartThings") {
+		capability "Contact Sensor"
+		capability "Sensor"
+
+		command "open"
+		command "close"
+	}
+
+	tiles {
+		standardTile("contact", "device.contact", width: 2, height: 2) {
+			state("closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821", action: "open")
+			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e", action: "close")
+		}
+		standardTile("freezerDoor", "device.contact", width: 2, height: 2, decoration: "flat") {
+			state("closed", label:'Freezer', icon:"st.contact.contact.closed", backgroundColor:"#79b821")
+			state("open", label:'Freezer', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
+		}
+		standardTile("mainDoor", "device.contact", width: 2, height: 2, decoration: "flat") {
+			state("closed", label:'Fridge', icon:"st.contact.contact.closed", backgroundColor:"#79b821")
+			state("open", label:'Fridge', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
+		}
+		standardTile("control", "device.contact", width: 1, height: 1, decoration: "flat") {
+			state("closed", label:'${name}', icon:"st.contact.contact.closed", action: "open")
+			state("open", label:'${name}', icon:"st.contact.contact.open", action: "close")
+		}
+		main "contact"
+		details "contact"
+	}
+}
+
+def installed() {
+	sendEvent(name: "contact", value: "closed")
+}
+
+def open() {
+	sendEvent(name: "contact", value: "open")
+	parent.doorOpen(device.deviceNetworkId)
+}
+
+def close() {
+	sendEvent(name: "contact", value: "closed")
+	parent.doorClosed(device.deviceNetworkId)
+}

devicetypes/smartthings/testing/simulated-refrigerator-temperature-control.src/simulated-refrigerator-temperature-control.groovy

@@ -0,0 +1,94 @@
+/**
+ *  Simulated Refrigerator Temperature Control
+ *
+ *  Copyright 2017 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Simulated Refrigerator Temperature Control", namespace: "smartthings/testing", author: "SmartThings") {
+		capability "Temperature Measurement"
+		capability "Thermostat Cooling Setpoint"
+
+		command "tempUp"
+		command "tempDown"
+		command "setpointUp"
+		command "setpointDown"
+	}
+
+	tiles {
+		valueTile("refrigerator", "device.temperature", width: 2, height: 2, canChangeBackground: true) {
+			state("temperature", label:'${currentValue}°', unit:"F",
+					backgroundColors:[
+							[value: 0, color: "#153591"],
+							[value: 40, color: "#1e9cbb"],
+							[value: 45, color: "#f1d801"]
+					]
+			)
+		}
+		valueTile("freezer", "device.temperature", width: 2, height: 2, canChangeBackground: true) {
+			state("temperature", label:'${currentValue}°', unit:"F",
+					backgroundColors:[
+							[value: 0, color: "#153591"],
+							[value: 5, color: "#1e9cbb"],
+							[value: 15, color: "#f1d801"]
+					]
+			)
+		}
+		valueTile("freezerSetpoint", "device.coolingSetpoint", inactiveLabel: false, decoration: "flat") {
+			state "setpoint", label:'Freezer Set: ${currentValue}°', unit:"F"
+		}
+		valueTile("refrigeratorSetpoint", "device.coolingSetpoint", inactiveLabel: false, decoration: "flat") {
+			state "heat", label:'Fridge Set: ${currentValue}°', unit:"F"
+		}
+		standardTile("tempUp", "device.temperature", inactiveLabel: false, decoration: "flat") {
+			state "default", action:"tempUp", icon:"st.thermostat.thermostat-up"
+		}
+		standardTile("tempDown", "device.temperature", inactiveLabel: false, decoration: "flat") {
+			state "default", action:"tempDown", icon:"st.thermostat.thermostat-down"
+		}
+		standardTile("setpointUp", "device.coolingSetpoint", inactiveLabel: false, decoration: "flat") {
+			state "default", action:"setpointUp", icon:"st.thermostat.thermostat-up"
+		}
+		standardTile("setpointDown", "device.coolingSetpoint", inactiveLabel: false, decoration: "flat") {
+			state "default", action:"setpointDown", icon:"st.thermostat.thermostat-down"
+		}
+	}
+}
+
+def installed() {
+	sendEvent(name: "temperature", value: device.componentName == "freezer" ? 2 : 40)
+	sendEvent(name: "coolingSetpoint", value: device.componentName == "freezer" ? 2 : 40)
+}
+
+def updated() {
+	installed()
+}
+
+void tempUp() {
+	def value = device.currentValue("temperature") as Integer
+	sendEvent(name: "temperature", value: value + 1)
+}
+
+void tempDown() {
+	def value = device.currentValue("temperature") as Integer
+	sendEvent(name: "temperature", value: value - 1)
+}
+
+void setpointUp() {
+	def value = device.currentValue("coolingSetpoint") as Integer
+	sendEvent(name: "coolingSetpoint", value: value + 1)
+}
+
+void setpointDown() {
+	def value = device.currentValue("coolingSetpoint") as Integer
+	sendEvent(name: "coolingSetpoint", value: value - 1)
+}

devicetypes/smartthings/testing/simulated-refrigerator.src/simulated-refrigerator.groovy

@@ -0,0 +1,91 @@
+/**
+ *  Simulated Refrigerator
+ *
+ *  Example composite device handler that simulates a refrigerator with a freezer compartment and a main compartment.
+ *  Each of these compartments has its own door, temperature, and temperature setpoint. Each compartment modeled
+ *  as a child device of the main refrigerator device so that temperature-based SmartApps can be used with each
+ *  compartment
+ *
+ *  Copyright 2017 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+metadata {
+	definition (name: "Simulated Refrigerator", namespace: "smartthings/testing", author: "SmartThings") {
+		capability "Contact Sensor"
+	}
+
+	tiles(scale: 2) {
+		standardTile("contact", "device.contact", width: 4, height: 4) {
+			state("closed", label:'${name}', icon:"st.fridge.fridge-closed", backgroundColor:"#79b821")
+			state("open", label:'${name}', icon:"st.fridge.fridge-open", backgroundColor:"#ffa81e")
+		}
+		childDeviceTile("freezerDoor", "freezerDoor", height: 2, width: 2, childTileName: "freezerDoor")
+		childDeviceTile("mainDoor", "mainDoor", height: 2, width: 2, childTileName: "mainDoor")
+		childDeviceTile("freezer", "freezer", height: 2, width: 2, childTileName: "freezer")
+		childDeviceTile("refrigerator", "refrigerator", height: 2, width: 2, childTileName: "refrigerator")
+		childDeviceTile("freezerSetpoint", "freezer", height: 1, width: 2, childTileName: "freezerSetpoint")
+		childDeviceTile("refrigeratorSetpoint", "refrigerator", height: 1, width: 2, childTileName: "refrigeratorSetpoint")
+
+		// for simulator
+		childDeviceTile("freezerUp", "freezer", height: 1, width: 1, childTileName: "tempUp")
+		childDeviceTile("freezerDown", "freezer", height: 1, width: 1, childTileName: "tempDown")
+		childDeviceTile("refrigeratorUp", "refrigerator", height: 1, width: 1, childTileName: "tempUp")
+		childDeviceTile("refrigeratorDown", "refrigerator", height: 1, width: 1, childTileName: "tempDown")
+		childDeviceTile("freezerDoorControl", "freezerDoor", height: 1, width: 1, childTileName: "control")
+		childDeviceTile("mainDoorControl", "mainDoor", height: 1, width: 1, childTileName: "control")
+		childDeviceTile("freezerSetpointUp", "freezer", height: 1, width: 1, childTileName: "setpointUp")
+		childDeviceTile("freezerSetpointDown", "freezer", height: 1, width: 1, childTileName: "setpointDown")
+		childDeviceTile("refrigeratorSetpointUp", "refrigerator", height: 1, width: 1, childTileName: "setpointUp")
+		childDeviceTile("refrigeratorSetpointDown", "refrigerator", height: 1, width: 1, childTileName: "setpointDown")
+	}
+}
+
+def installed() {
+	state.counter = state.counter ? state.counter + 1 : 1
+	if (state.counter == 1) {
+		addChildDevice(
+				"Simulated Refrigerator Door",
+				"${device.deviceNetworkId}.1",
+				null,
+				[completedSetup: true, label: "${device.label} (Freezer Door)", componentName: "freezerDoor", componentLabel: "Freezer Door"])
+
+		addChildDevice(
+				"Simulated Refrigerator Door",
+				"${device.deviceNetworkId}.2",
+				null,
+				[completedSetup: true, label: "${device.label} (Main Door)", componentName: "mainDoor", componentLabel: "Main Door"])
+
+		addChildDevice(
+				"Simulated Refrigerator Temperature Control",
+				"${device.deviceNetworkId}.3",
+				null,
+				[completedSetup: true, label: "${device.label} (Freezer)", componentName: "freezer", componentLabel: "Freezer"])
+
+		addChildDevice(
+				"Simulated Refrigerator Temperature Control",
+				"${device.deviceNetworkId}.3",
+				null,
+				[completedSetup: true, label: "${device.label} (Fridge)", componentName: "refrigerator", componentLabel: "Fridge"])
+	}
+}
+
+def doorOpen(dni) {
+	// If any door opens, then the refrigerator is considered to be open
+	sendEvent(name: "contact", value: "open")
+}
+
+def doorClosed(dni) {
+	// Both doors must be closed for the refrigerator to be considered closed
+	if (!childDevices.find{it.deviceNetworkId != dni && it.currentValue("contact") == "open"}) {
+		sendEvent(name: "contact", value: "closed")
+	}
+}

devicetypes/smartthings/wemo-bulb.src/wemo-bulb.groovy

@@ -18,7 +18,7 @@
 //DEPRECATED - Using the generic DTH for this device. Users need to be moved before deleting this DTH
 
 metadata {
-	definition (name: "WeMo Bulb", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
+	definition (name: "WeMo Bulb", namespace: "smartthings", author: "SmartThings") {
 	
     	capability "Actuator"
         capability "Configuration"

devicetypes/smartthings/zigbee-dimmer-power.src/zigbee-dimmer-power.groovy

@@ -13,7 +13,7 @@
  */
 
 metadata {
-    definition (name: "ZigBee Dimmer Power", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
+    definition (name: "ZigBee Dimmer Power", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.switch") {
         capability "Actuator"
         capability "Configuration"
         capability "Refresh"

devicetypes/smartthings/zigbee-dimmer.src/zigbee-dimmer.groovy

@@ -13,7 +13,7 @@
  */
 
 metadata {
-    definition (name: "ZigBee Dimmer", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
+    definition (name: "ZigBee Dimmer", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.switch") {
         capability "Actuator"
         capability "Configuration"
         capability "Refresh"

devicetypes/smartthings/zll-dimmer-bulb.src/zll-dimmer-bulb.groovy

@@ -16,7 +16,7 @@ import groovy.transform.Field
 @Field Boolean hasConfiguredHealthCheck = false
 
 metadata {
-    definition (name: "ZLL Dimmer Bulb", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
+    definition (name: "ZLL Dimmer Bulb", namespace: "smartthings", author: "SmartThings") {
 
         capability "Actuator"
         capability "Configuration"

devicetypes/smartthings/zll-rgb-bulb.src/zll-rgb-bulb.groovy

@@ -14,7 +14,7 @@
 import physicalgraph.zigbee.zcl.DataType
 
 metadata {
-	definition (name: "ZLL RGB Bulb", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
+	definition (name: "ZLL RGB Bulb", namespace: "smartthings", author: "SmartThings") {
 
 		capability "Actuator"
 		capability "Color Control"

devicetypes/smartthings/zll-rgbw-bulb.src/zll-rgbw-bulb.groovy

@@ -14,7 +14,7 @@
 import physicalgraph.zigbee.zcl.DataType
 
 metadata {
-    definition (name: "ZLL RGBW Bulb", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
+    definition (name: "ZLL RGBW Bulb", namespace: "smartthings", author: "SmartThings") {
 
         capability "Actuator"
         capability "Color Control"

devicetypes/smartthings/zll-white-color-temperature-bulb-5000k.src/zll-white-color-temperature-bulb-5000k.groovy

@@ -16,7 +16,7 @@ import groovy.transform.Field
 @Field Boolean hasConfiguredHealthCheck = false
 
 metadata {
-    definition (name: "ZLL White Color Temperature Bulb 5000K", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
+    definition (name: "ZLL White Color Temperature Bulb 5000K", namespace: "smartthings", author: "SmartThings") {
 
         capability "Actuator"
         capability "Color Temperature"

devicetypes/smartthings/zll-white-color-temperature-bulb.src/zll-white-color-temperature-bulb.groovy

@@ -16,7 +16,7 @@ import groovy.transform.Field
 @Field Boolean hasConfiguredHealthCheck = false
 
 metadata {
-    definition (name: "ZLL White Color Temperature Bulb", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
+    definition (name: "ZLL White Color Temperature Bulb", namespace: "smartthings", author: "SmartThings") {
 
         capability "Actuator"
         capability "Color Temperature"

devicetypes/smartthings/zwave-dimmer-switch-generic.src/zwave-dimmer-switch-generic.groovy

@@ -12,7 +12,7 @@
  *
  */
 metadata {
-	definition (name: "Z-Wave Dimmer Switch Generic", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
+	definition (name: "Z-Wave Dimmer Switch Generic", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.switch") {
 		capability "Switch Level"
 		capability "Actuator"
 		capability "Health Check"
@@ -78,11 +78,6 @@ metadata {
 	}
 }
 
-def installed(){
-// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-}
-
 def updated(){
 // Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

devicetypes/smartthings/zwave-door-window-sensor.src/zwave-door-window-sensor.groovy

@@ -17,7 +17,7 @@
  */
 
 metadata {
-	definition (name: "Z-Wave Door/Window Sensor", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "x.com.st.d.sensor.contact") {
+	definition (name: "Z-Wave Door/Window Sensor", namespace: "smartthings", author: "SmartThings") {
 		capability "Contact Sensor"
 		capability "Sensor"
 		capability "Battery"
@@ -79,11 +79,6 @@ def parse(String description) {
 	return result
 }
 
-def installed() {
-	// Device-Watch simply pings if no device events received for 482min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 4 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-}
-
 def updated() {
 	// Device-Watch simply pings if no device events received for 482min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 4 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

devicetypes/smartthings/zwave-garage-door-opener.src/zwave-garage-door-opener.groovy

@@ -65,11 +65,6 @@ metadata {
 
 import physicalgraph.zwave.commands.barrieroperatorv1.*
 
-def installed(){
-// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-}
-
 def updated(){
 // Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

devicetypes/smartthings/zwave-lock.src/zwave-lock.groovy

@@ -68,11 +68,6 @@ metadata {
 import physicalgraph.zwave.commands.doorlockv1.*
 import physicalgraph.zwave.commands.usercodev1.*
 
-def installed() {
-	// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-}
-
 def updated() {
 	// Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

devicetypes/smartthings/zwave-metering-dimmer.src/zwave-metering-dimmer.groovy

@@ -100,11 +100,6 @@ def parse(String description) {
     result
 }
 
-def installed() {
-	// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-}
-
 def updated() {
 	// Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

devicetypes/smartthings/zwave-metering-switch.src/zwave-metering-switch.groovy

@@ -74,11 +74,6 @@ metadata {
 	}
 }
 
-def installed() {
-	// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-}
-
 def updated() {
 	// Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

devicetypes/smartthings/zwave-motion-sensor.src/zwave-motion-sensor.groovy

@@ -17,7 +17,7 @@
  */
 
 metadata {
-	definition (name: "Z-Wave Motion Sensor", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "x.com.st.d.sensor.motion") {
+	definition (name: "Z-Wave Motion Sensor", namespace: "smartthings", author: "SmartThings") {
 		capability "Motion Sensor"
 		capability "Sensor"
 		capability "Battery"
@@ -51,12 +51,7 @@ metadata {
 	}
 }
 
-def installed() {
+def updated(){
-// Device wakes up every 4 hours, this interval allows us to miss one wakeup notification before marking offline
-	sendEvent(name: "checkInterval", value: 8 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-}
-
-def updated() {
 // Device wakes up every 4 hours, this interval allows us to miss one wakeup notification before marking offline
 	sendEvent(name: "checkInterval", value: 8 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 }

devicetypes/smartthings/zwave-plus-door-window-sensor.src/zwave-plus-door-window-sensor.groovy

@@ -16,7 +16,7 @@
 */
 
 metadata {
-	definition (name: "Z-Wave Plus Door/Window Sensor", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "x.com.st.d.sensor.contact") {
+	definition (name: "Z-Wave Plus Door/Window Sensor", namespace: "smartthings", author: "SmartThings") {
 		capability "Contact Sensor"
 		capability "Configuration"
 		capability "Battery"

devicetypes/smartthings/zwave-siren.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/zwave-siren.src/README.md

@@ -0,0 +1,42 @@
+# Z-wave Siren
+
+Cloud Execution
+
+Works with: 
+
+* [FortrezZ Siren Strobe Alarm](https://www.smartthings.com/works-with-smartthings/other/fortrezz-water-valve)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Troubleshooting](#troubleshooting)
+
+## Capabilities
+
+* **Actuator** - represents that a Device has commands
+* **Alarm** - allows for interacting with devices that serve as alarms
+* **Battery** - defines device uses a battery
+* **Health Check** - indicates ability to get device health notifications
+* **Polling** - represents that poll() can be implemented for the device
+* **Refresh** - _refresh()_ command for status updates
+* **Sensor** - detects sensor events
+* **Switch** - can detect state (possible values: on/off)
+
+## Device Health
+
+FortrezZ Siren Strobe Alarm is polled by the hub.
+As of hubCore version 0.14.38 the hub sends up reports every 15 minutes regardless of whether the state changed.
+Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*15 + 2)mins = 32 mins.
+Not to mention after going OFFLINE when the device is plugged back in, it might take a considerable amount of time for
+the device to appear as ONLINE again. This is because if this listening device does not respond to two poll requests in a row,
+it is not polled for 5 minutes by the hub. This can delay up the process of being marked ONLINE by quite some time.
+
+* __32min__ checkInterval
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
+* [FortrezZ Siren Strobe Alarm Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/202294760-FortrezZ-Siren-Strobe-Alarm)

devicetypes/smartthings/zwave-siren.src/zwave-siren.groovy

@@ -20,6 +20,7 @@ metadata {
 		capability "Actuator"
         capability "Alarm"
         capability "Battery"
+		capability "Health Check"
         capability "Polling"
         capability "Refresh"
         capability "Sensor"
@@ -27,6 +28,7 @@ metadata {
 
 
 		fingerprint inClusters: "0x20,0x25,0x86,0x80,0x85,0x72,0x71"
+		fingerprint mfr:"0084", prod:"0313", model:"010B", deviceJoinName: "FortrezZ Siren Strobe Alarm"
 	}
 
 	simulator {
@@ -58,6 +60,11 @@ metadata {
 	}
 }
 
+def updated(){
+// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def createEvents(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
 	def map = [ name: "battery", unit: "%" ]
 	if (cmd.batteryLevel == 0xFF) {
@@ -119,6 +126,13 @@ def both() {
 	on()
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+	refresh()
+}
+
 def refresh() {
 	log.debug "sending battery refresh command"
 	zwave.batteryV1.batteryGet().format()

devicetypes/smartthings/zwave-smoke-alarm.src/zwave-smoke-alarm.groovy

@@ -53,12 +53,7 @@ metadata {
 	}
 }
 
-def installed() {
+def updated(){
-// Device checks in every hour, this interval allows us to miss one check-in notification before marking offline
-	sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-}
-
-def updated() {
 // Device checks in every hour, this interval allows us to miss one check-in notification before marking offline
 	sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 }

devicetypes/smartthings/zwave-switch-generic.src/zwave-switch-generic.groovy

@@ -61,11 +61,6 @@ metadata {
 	}
 }
 
-def installed(){
-// Device-Watch simply pings if no device events received for checkInterval duration of 32min = 2 * 15min + 2min lag time
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-}
-
 def updated(){
 // Device-Watch simply pings if no device events received for checkInterval duration of 32min = 2 * 15min + 2min lag time
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

devicetypes/smartthings/zwave-switch.src/zwave-switch.groovy

@@ -65,11 +65,6 @@ metadata {
 	}
 }
 
-def installed() {
-	// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-}
-
 def updated(){
 		// Device-Watch simply pings if no device events received for 32min(checkInterval)
 		sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

devicetypes/smartthings/zwave-thermostat.src/zwave-thermostat.groovy

@@ -124,11 +124,6 @@ metadata {
 	}
 }
 
-def installed(){
-	// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-}
-
 def updated(){
 	// Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

devicetypes/smartthings/zwave-virtual-momentary-contact-switch.src/zwave-virtual-momentary-contact-switch.groovy

@@ -16,7 +16,7 @@
  *  Date: 2013-03-07
  */
 metadata {
-	definition (name: "Z-Wave Virtual Momentary Contact Switch", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "x.com.st.d.sensor.contact") {
+	definition (name: "Z-Wave Virtual Momentary Contact Switch", namespace: "smartthings", author: "SmartThings") {
 		capability "Actuator"
 		capability "Switch"
 		capability "Refresh"

devicetypes/smartthings/zwave-water-sensor.src/zwave-water-sensor.groovy

@@ -17,7 +17,7 @@
  */
 
 metadata {
-	definition (name: "Z-Wave Water Sensor", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "x.com.st.d.sensor.moisture") {
+	definition (name: "Z-Wave Water Sensor", namespace: "smartthings", author: "SmartThings") {
 		capability "Water Sensor"
 		capability "Sensor"
 		capability "Battery"