MSA-2081: mct-340e Window/door sensor

devicetypes/plaidsystems/spruce-sensor.src/spruce-sensor.groovy

@@ -1,5 +1,5 @@
 /**
- *  Spruce Sensor -updated with SLP model number 5/2017
+ *  Spruce Sensor -Pre-release V2 10/8/2015
  *
  *  Copyright 2014 Plaid Systems
  *
@@ -14,33 +14,25 @@
  *
  -------10/20/2015 Updates--------
  -Fix/add battery reporting interval to update
- -remove polling and/or refresh
+ -remove polling and/or refresh(?)
- 
- -------5/2017 Updates--------
- -Add fingerprints for SLP
- -add device health, check every 60mins + 2mins
  */
- 
 metadata {
-	definition (name: "Spruce Sensor", namespace: "plaidsystems", author: "Plaid Systems") {
+	definition (name: "Spruce Sensor", namespace: "plaidsystems", author: "NCauffman") {
 		
 		capability "Configuration"
 		capability "Battery"
         capability "Relative Humidity Measurement"
         capability "Temperature Measurement"
         capability "Sensor"
-        capability "Health Check"
         //capability "Polling"
 		
         attribute "maxHum", "string"
         attribute "minHum", "string"        
         
-        
         command "resetHumidity"
         command "refresh"
         
-        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0402,0405", outClusters: "0003, 0019", manufacturer: "PLAID SYSTEMS", model: "PS-SPRZMS-01", deviceJoinName: "Spruce Sensor"
+        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0402,0405", outClusters: "0003, 0019", manufacturer: "PLAID SYSTEMS", model: "PS-SPRZMS-01"
-        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0402,0405", outClusters: "0003, 0019", manufacturer: "PLAID SYSTEMS", model: "PS-SPRZMS-SLP1", deviceJoinName: "Spruce Sensor"
 	}
 
 	preferences {
@@ -301,11 +293,6 @@ def setConfig(){
     sendEvent(name: 'configuration',value: configInterval, descriptionText: "Configuration initialized")
 }
 
-def installed(){
-	//check every 1 hour + 2mins
-    sendEvent(name: "checkInterval", value: 1 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-}
-
 //when device preferences are changed
 def updated(){	
     log.debug "device updated"
@@ -316,8 +303,6 @@ def updated(){
             sendEvent(name: 'configuration',value: 0, descriptionText: "Settings changed and will update at next report. Measure interval set to ${interval} mins")
     	}
     }
-    //check every 1 hour + 2mins
-    sendEvent(name: "checkInterval", value: 1 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 }
 
 //poll
@@ -410,4 +395,4 @@ private byte[] reverseArray(byte[] array) {
         i++;
     }
     return array
-}
+}

devicetypes/smartthings/aeon-multisensor-6.src/README.md

@@ -27,9 +27,13 @@ Works with:
 ## Device Health
 
 Aeon Labs MultiSensor 6 is polled by the hub.
-Aeon MultiSensor reports in once every hour.
+As of hubCore version 0.14.38 the hub sends up reports every 15 minutes regardless of whether the state changed.
+Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*15 + 2)mins = 32 mins.
+Not to mention after going OFFLINE when the device is plugged back in, it might take a considerable amount of time for
+the device to appear as ONLINE again. This is because if this listening device does not respond to two poll requests in a row,
+it is not polled for 5 minutes by the hub. This can delay up the process of being marked ONLINE by quite some time.
 
-* __122min__ checkInterval
+* __32min__ checkInterval
 
 ## Troubleshooting
 

devicetypes/smartthings/aeon-multisensor-6.src/aeon-multisensor-6.groovy

@@ -130,13 +130,13 @@ metadata {
 }
 
 def installed(){
-// Device-Watch simply pings if no device events received for 122min(checkInterval)
+// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 }
 
 def updated() {
-// Device-Watch simply pings if no device events received for 122min(checkInterval)
+// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 	log.debug "Updated with settings: ${settings}"
 	log.debug "${device.displayName} is now ${device.latestValue("powerSupply")}"
 

devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy

@@ -105,8 +105,6 @@ def parse(String description) {
 				} else {
 					log.warn "TEMP REPORTING CONFIG FAILED- error code: ${descMap.data[0]}"
 				}
-			} else if (descMap?.clusterInt == zigbee.IAS_ZONE_CLUSTER && descMap.attrInt == zigbee.ATTRIBUTE_IAS_ZONE_STATUS && descMap?.value) {
-				map = translateZoneStatus(new ZoneStatus(zigbee.convertToInt(descMap?.value)))
 			}
 		}
 	} else if (map.name == "temperature") {
@@ -131,10 +129,6 @@ def parse(String description) {
 private Map parseIasMessage(String description) {
 	ZoneStatus zs = zigbee.parseZoneStatus(description)
 
-	translateZoneStatus(zs)
-}
-
-private Map translateZoneStatus(ZoneStatus zs) {
 	return zs.isAlarm1Set() ? getMoistureResult('wet') : getMoistureResult('dry')
 }
 
@@ -203,8 +197,7 @@ def ping() {
 def refresh() {
 	log.debug "Refreshing Temperature and Battery"
 	def refreshCmds = zigbee.readAttribute(zigbee.TEMPERATURE_MEASUREMENT_CLUSTER, 0x0000) +
-			zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x0020) +
+			zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x0020)
-			zigbee.readAttribute(zigbee.IAS_ZONE_CLUSTER, zigbee.ATTRIBUTE_IAS_ZONE_STATUS)
 
 	return refreshCmds + zigbee.enrollResponse()
 }

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -111,8 +111,6 @@ def parse(String description) {
 				def value = descMap.value.endsWith("01") ? "active" : "inactive"
 				log.debug "Doing a read attr motion event"
 				map = getMotionResult(value)
-			} else if (descMap?.clusterInt == zigbee.IAS_ZONE_CLUSTER && descMap.attrInt == zigbee.ATTRIBUTE_IAS_ZONE_STATUS && descMap?.value) {
-				map = translateZoneStatus(new ZoneStatus(zigbee.convertToInt(descMap?.value)))
 			}
 		}
 	} else if (map.name == "temperature") {
@@ -137,10 +135,6 @@ def parse(String description) {
 private Map parseIasMessage(String description) {
 	ZoneStatus zs = zigbee.parseZoneStatus(description)
 
-	translateZoneStatus(zs)
-}
-
-private Map translateZoneStatus(ZoneStatus zs) {
 	// Some sensor models that use this DTH use alarm1 and some use alarm2 to signify motion
 	return (zs.isAlarm1Set() || zs.isAlarm2Set()) ? getMotionResult('active') : getMotionResult('inactive')
 }
@@ -171,8 +165,8 @@ private Map getBatteryResult(rawValue) {
 			def pct = batteryMap[volts]
 			result.value = pct
 		} else {
-			def minVolts = 2.4
+			def minVolts = 2.1
-			def maxVolts = 2.7
+			def maxVolts = 3.0
 			def pct = (volts - minVolts) / (maxVolts - minVolts)
 			def roundedPct = Math.round(pct * 100)
 			if (roundedPct <= 0)
@@ -206,8 +200,7 @@ def refresh() {
 	log.debug "refresh called"
 
 	def refreshCmds = zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x0020) +
-			zigbee.readAttribute(zigbee.TEMPERATURE_MEASUREMENT_CLUSTER, 0x0000) +
+			zigbee.readAttribute(zigbee.TEMPERATURE_MEASUREMENT_CLUSTER, 0x0000)
-			zigbee.readAttribute(zigbee.IAS_ZONE_CLUSTER, zigbee.ATTRIBUTE_IAS_ZONE_STATUS)
 
 	return refreshCmds + zigbee.enrollResponse()
 }

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -134,9 +134,8 @@ def parse(String description) {
 				} else {
 					log.warn "TEMP REPORTING CONFIG FAILED- error code: ${descMap.data[0]}"
 				}
-			} else if (descMap?.clusterInt == zigbee.IAS_ZONE_CLUSTER && descMap.attrInt == zigbee.ATTRIBUTE_IAS_ZONE_STATUS && descMap?.value) {
-				maps += translateZoneStatus(new ZoneStatus(zigbee.convertToInt(descMap?.value)))
 			} else {
+
 				maps += handleAcceleration(descMap)
 			}
 		}
@@ -230,11 +229,6 @@ private List<Map> parseAxis(List<Map> attrData) {
 
 private List<Map> parseIasMessage(String description) {
 	ZoneStatus zs = zigbee.parseZoneStatus(description)
-
-	translateZoneStatus(zs)
-}
-
-private List<Map> translateZoneStatus(ZoneStatus zs) {
 	List<Map> results = []
 
 	if (garageSensor != "Yes") {
@@ -274,7 +268,7 @@ private Map getBatteryResult(rawValue) {
 			result.value = pct
 		} else {
 			def minVolts = 2.1
-			def maxVolts = 2.7
+			def maxVolts = 3.0
 			def pct = (volts - minVolts) / (maxVolts - minVolts)
 			def roundedPct = Math.round(pct * 100)
 			if (roundedPct <= 0)
@@ -319,7 +313,7 @@ def refresh() {
 	def refreshCmds = zigbee.readAttribute(zigbee.TEMPERATURE_MEASUREMENT_CLUSTER, 0x0000) +
 			zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x0020) +
 			zigbee.readAttribute(0xFC02, 0x0010, [mfgCode: manufacturerCode]) +
-			zigbee.readAttribute(zigbee.IAS_ZONE_CLUSTER, zigbee.ATTRIBUTE_IAS_ZONE_STATUS) + zigbee.enrollResponse()
+			zigbee.enrollResponse()
 
 	return refreshCmds
 }

devicetypes/smartthings/zwave-thermostat.src/zwave-thermostat.groovy

@@ -15,9 +15,10 @@ metadata {
 	definition (name: "Z-Wave Thermostat", namespace: "smartthings", author: "SmartThings") {
 		capability "Actuator"
 		capability "Temperature Measurement"
+		capability "Relative Humidity Measurement"
 		capability "Thermostat"
 		capability "Configuration"
-		capability "Refresh"
+		capability "Polling"
 		capability "Sensor"
 		capability "Health Check"
 		
@@ -116,7 +117,7 @@ metadata {
 			state "cool", label:'${currentValue}° cool', backgroundColor:"#ffffff"
 		}
 		standardTile("refresh", "device.thermostatMode", inactiveLabel: false, decoration: "flat") {
-			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
+			state "default", action:"polling.poll", icon:"st.secondary.refresh"
 		}
 		main "temperature"
 		details(["temperature", "mode", "fanMode", "heatSliderControl", "heatingSetpoint", "coolSliderControl", "coolingSetpoint", "refresh"])
@@ -124,20 +125,13 @@ metadata {
 }
 
 def installed(){
-	sendHubCommand(new physicalgraph.device.HubAction(zwave.thermostatModeV2.thermostatModeSupportedGet().format()))
+	// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	initialize()
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 }
 
 def updated(){
-	initialize()
-}
-
-def initialize() {
 	// Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-	unschedule()
-	runEvery5Minutes("refresh")
-	refresh()
 }
 
 def parse(String description)
@@ -155,7 +149,6 @@ def parse(String description)
 		]
 		if (map.name == "thermostatMode") {
 			state.lastTriedMode = map.value
-			map.data = [supportedThermostatModes:state.supportedThermostatModes]
 			if (map.value == "cool") {
 				map2.value = device.latestValue("coolingSetpoint")
 				log.info "THERMOSTAT, latest cooling setpoint = ${map2.value}"
@@ -179,7 +172,6 @@ def parse(String description)
 		}
 	} else if (map.name == "thermostatFanMode" && map.isStateChange) {
 		state.lastTriedFanMode = map.value
-		map.data = [supportedThermostatFanModes: state.supportedThermostatFanModes]
 	}
 	log.debug "Parse returned $result"
 	result
@@ -313,26 +305,26 @@ def zwaveEvent(physicalgraph.zwave.commands.thermostatfanmodev3.ThermostatFanMod
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.thermostatmodev2.ThermostatModeSupportedReport cmd) {
-	def supportedModes = []
+	def supportedModes = ""
-	if(cmd.off) { supportedModes << "off" }
+	if(cmd.off) { supportedModes += "off " }
-	if(cmd.heat) { supportedModes << "heat" }
+	if(cmd.heat) { supportedModes += "heat " }
-	if(cmd.cool) { supportedModes << "cool" }
+	if(cmd.auxiliaryemergencyHeat) { supportedModes += "emergency heat " }
-	if(cmd.auto) { supportedModes << "auto" }
+	if(cmd.cool) { supportedModes += "cool " }
-	if(cmd.auxiliaryemergencyHeat) { supportedModes << "emergency heat" }
+	if(cmd.auto) { supportedModes += "auto " }
 
-	state.supportedThermostatModes = supportedModes
+	state.supportedModes = supportedModes
-	sendEvent(name: "supportedThermostatModes", value: supportedModes, displayed: false)
+	// No events to be generated, return empty map
 	return [:]
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.thermostatfanmodev3.ThermostatFanModeSupportedReport cmd) {
-	def supportedFanModes = []
+	def supportedFanModes = ""
-	if(cmd.auto) { supportedFanModes << "auto" } // "fanAuto "
+	if(cmd.auto) { supportedFanModes += "auto " } // "fanAuto "
-	if(cmd.circulation) { supportedFanModes << "circulate" } // "fanCirculate"
+	if(cmd.low) { supportedFanModes += "on " } // "fanOn"
-	if(cmd.low) { supportedFanModes << "on" } // "fanOn"
+	if(cmd.circulation) { supportedFanModes += "circulate " } // "fanCirculate"
 
-	state.supportedThermostatFanModes = supportedFanModes
+	state.supportedFanModes = supportedFanModes
-	sendEvent(name: "supportedThermostatFanModes", value: supportedFanModes, displayed: false)
+	// No events to be generated, return empty map
 	return [:]
 }
 
@@ -345,17 +337,15 @@ def zwaveEvent(physicalgraph.zwave.Command cmd) {
 }
 
 // Command Implementations
-def refresh() {
+def poll() {
-	def cmds = []
+	delayBetween([
-	cmds << new physicalgraph.device.HubAction(zwave.thermostatModeV2.thermostatModeSupportedGet().format())
+		zwave.sensorMultilevelV3.sensorMultilevelGet().format(), // current temperature
-	cmds << new physicalgraph.device.HubAction(zwave.thermostatFanModeV3.thermostatFanModeSupportedGet().format())
+		zwave.thermostatSetpointV1.thermostatSetpointGet(setpointType: 1).format(),
-	cmds << new physicalgraph.device.HubAction(zwave.thermostatModeV2.thermostatModeGet().format())
+		zwave.thermostatSetpointV1.thermostatSetpointGet(setpointType: 2).format(),
-	cmds << new physicalgraph.device.HubAction(zwave.thermostatFanModeV3.thermostatFanModeGet().format())
+		zwave.thermostatModeV2.thermostatModeGet().format(),
-	cmds << new physicalgraph.device.HubAction(zwave.sensorMultilevelV2.sensorMultilevelGet().format()) // current temperature
+		zwave.thermostatFanModeV3.thermostatFanModeGet().format(),
-	cmds << new physicalgraph.device.HubAction(zwave.thermostatOperatingStateV1.thermostatOperatingStateGet().format())
+		zwave.thermostatOperatingStateV1.thermostatOperatingStateGet().format()
-	cmds << new physicalgraph.device.HubAction(zwave.thermostatSetpointV1.thermostatSetpointGet(setpointType: 1).format())
+	], 2300)
-	cmds << new physicalgraph.device.HubAction(zwave.thermostatSetpointV1.thermostatSetpointGet(setpointType: 2).format())
-	sendHubCommand(cmds)
 }
 
 def quickSetHeat(degrees) {
@@ -426,14 +416,28 @@ def ping() {
 	poll()
 }
 
+def configure() {
+	delayBetween([
+		zwave.thermostatModeV2.thermostatModeSupportedGet().format(),
+		zwave.thermostatFanModeV3.thermostatFanModeSupportedGet().format(),
+		zwave.associationV1.associationSet(groupingIdentifier:1, nodeId:[zwaveHubNodeId]).format(),
+		zwave.sensorMultilevelV3.sensorMultilevelGet().format(), // current temperature
+		zwave.thermostatSetpointV1.thermostatSetpointGet(setpointType: 1).format(),
+		zwave.thermostatSetpointV1.thermostatSetpointGet(setpointType: 2).format(),
+		zwave.thermostatModeV2.thermostatModeGet().format(),
+		zwave.thermostatFanModeV3.thermostatFanModeGet().format(),
+		zwave.thermostatOperatingStateV1.thermostatOperatingStateGet().format()
+	], 2300)
+}
+
 def modes() {
-	return state.supportedThermostatModes
+	["off", "heat", "cool", "auto", "emergency heat"]
 }
 
 def switchMode() {
 	def currentMode = device.currentState("thermostatMode")?.value
-	def lastTriedMode = state.lastTriedMode ?: currentMode ?: ["off"]
+	def lastTriedMode = state.lastTriedMode ?: currentMode ?: "off"
-	def supportedModes = getDataByName("supportedThermostatModes")
+	def supportedModes = getDataByName("supportedModes")
 	def modeOrder = modes()
 	def next = { modeOrder[modeOrder.indexOf(it) + 1] ?: modeOrder[0] }
 	def nextMode = next(lastTriedMode)
@@ -450,7 +454,7 @@ def switchMode() {
 }
 
 def switchToMode(nextMode) {
-	def supportedModes = getDataByName("supportedThermostatModes")
+	def supportedModes = getDataByName("supportedModes")
 	if(supportedModes && !supportedModes.contains(nextMode)) log.warn "thermostat mode '$nextMode' is not supported"
 	if (nextMode in modes()) {
 		state.lastTriedMode = nextMode
@@ -462,9 +466,9 @@ def switchToMode(nextMode) {
 
 def switchFanMode() {
 	def currentMode = device.currentState("thermostatFanMode")?.value
-	def lastTriedMode = state.lastTriedFanMode ?: currentMode ?: ["off"]
+	def lastTriedMode = state.lastTriedFanMode ?: currentMode ?: "off"
-	def supportedModes = getDataByName("supportedThermostatFanModes") ?: ["auto", "on"]
+	def supportedModes = getDataByName("supportedFanModes") ?: "auto on" // "fanAuto fanOn"
-	def modeOrder = state.supportedThermostatFanModes
+	def modeOrder = ["auto", "circulate", "on"]                 // "fanAuto", "fanCirculate", "fanOn"
 	def next = { modeOrder[modeOrder.indexOf(it) + 1] ?: modeOrder[0] }
 	def nextMode = next(lastTriedMode)
 	while (!supportedModes?.contains(nextMode) && nextMode != "auto") { // "fanAuto"
@@ -474,7 +478,7 @@ def switchFanMode() {
 }
 
 def switchToFanMode(nextMode) {
-	def supportedFanModes = getDataByName("supportedThermostatFanModes")
+	def supportedFanModes = getDataByName("supportedFanModes")
 	if(supportedFanModes && !supportedFanModes.contains(nextMode)) log.warn "thermostat mode '$nextMode' is not supported"
 
 	def returnCommand

devicetypes/tomasaxerot/visonic-door-window-sensor.src/visonic-door-window-sensor.groovy

@@ -0,0 +1,299 @@
+/**
+ *  Visonic Door/Window Sensor
+ *
+ *  Copyright 2017 Tomas Axerot
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
+
+metadata {
+	definition (name: "Visonic Door/Window Sensor", namespace: "tomasaxerot", author: "Tomas Axerot") {
+		capability "Battery"
+		capability "Configuration"
+		capability "Contact Sensor"
+		capability "Refresh"
+		capability "Temperature Measurement"
+		capability "Health Check"
+        capability "Sensor"
+
+		command "enrollResponse"
+
+
+		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "Visonic", model: "MCT-340 SMA"
+        fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "Visonic", model: "MCT-340 E"
+	}
+
+	simulator {
+
+	}
+
+	preferences {
+		input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
+		input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
+	}
+    
+    tiles(scale: 2) {
+		multiAttributeTile(name: "contact", type: "generic", width: 6, height: 4) {
+			tileAttribute("device.contact", key: "PRIMARY_CONTROL") {
+				attributeState "open", label: '${name}', icon: "st.contact.contact.open", backgroundColor: "#e86d13"
+				attributeState "closed", label: '${name}', icon: "st.contact.contact.closed", backgroundColor: "#00A0DC"
+			}
+		}
+
+		valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
+			state "temperature", label: '${currentValue}°',
+					backgroundColors: [
+							[value: 31, color: "#153591"],
+							[value: 44, color: "#1e9cbb"],
+							[value: 59, color: "#90d2a7"],
+							[value: 74, color: "#44b621"],
+							[value: 84, color: "#f1d801"],
+							[value: 95, color: "#d04e00"],
+							[value: 96, color: "#bc2323"]
+					]
+		}
+		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
+			state "battery", label: '${currentValue}% battery', unit: ""
+		}
+
+		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "default", action: "refresh.refresh", icon: "st.secondary.refresh"
+		}
+        
+        standardTile("configure", "device.configure", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "configure", label:'', action:"configuration.configure", icon:"st.secondary.configure"
+		}
+
+		main(["contact", "temperature"])
+		details(["contact", "temperature", "battery", "refresh", "configure"])
+	}	
+}
+
+def parse(String description) {
+	log.debug "description: $description"
+
+	Map map = [:]
+	if (description?.startsWith('catchall:')) {
+		map = parseCatchAllMessage(description)
+	}
+	else if (description?.startsWith('read attr -')) {
+		map = parseReportAttributeMessage(description)
+	}
+	else if (description?.startsWith('temperature: ')) {
+		map = parseCustomMessage(description)
+	}
+    else if (description?.startsWith('zone status')) {
+    	map = parseIasMessage(description)
+    }
+
+	log.debug "Parse returned $map"
+	def result = map ? createEvent(map) : null
+
+    if (description?.startsWith('enroll request')) {
+    	List cmds = enrollResponse()
+        log.debug "enroll response: ${cmds}"
+        result = cmds?.collect { new physicalgraph.device.HubAction(it) }
+    }
+    return result
+}
+
+private Map parseCatchAllMessage(String description) {
+    Map resultMap = [:]
+    def cluster = zigbee.parse(description)
+    if (shouldProcessMessage(cluster)) {
+        switch(cluster.clusterId) {
+            case 0x0001:
+            	resultMap = getBatteryResult(cluster.data.last())
+                break
+
+            case 0x0402:
+                log.debug 'TEMP'
+                // temp is last 2 data values. reverse to swap endian
+                String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+                def value = getTemperature(temp)
+                resultMap = getTemperatureResult(value)
+                break
+        }
+    }
+
+    return resultMap
+}
+
+private boolean shouldProcessMessage(cluster) {
+    // 0x0B is default response indicating message got through
+    // 0x07 is bind message
+    boolean ignoredMessage = cluster.profileId != 0x0104 ||
+        cluster.command == 0x0B ||
+        cluster.command == 0x07 ||
+        (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
+    return !ignoredMessage
+}
+
+private Map parseReportAttributeMessage(String description) {
+	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
+		def nameAndValue = param.split(":")
+		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
+	}
+	log.debug "Desc Map: $descMap"
+
+	Map resultMap = [:]
+	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
+		def value = getTemperature(descMap.value)
+		resultMap = getTemperatureResult(value)
+	}
+	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
+		resultMap = getBatteryResult(Integer.parseInt(descMap.value, 16))
+	}
+
+	return resultMap
+}
+
+private Map parseCustomMessage(String description) {
+	Map resultMap = [:]
+	if (description?.startsWith('temperature: ')) {
+		def value = zigbee.parseHATemperatureValue(description, "temperature: ", getTemperatureScale())
+		resultMap = getTemperatureResult(value)
+	}
+	return resultMap
+}
+
+private Map parseIasMessage(String description) {
+	ZoneStatus zs = zigbee.parseZoneStatus(description)
+
+	return zs.isAlarm1Set() ? getContactResult('open') : getContactResult('closed')
+}
+
+def getTemperature(value) {
+	def celsius = Integer.parseInt(value, 16).shortValue() / 100
+	if(getTemperatureScale() == "C"){
+		return celsius
+	} else {
+		return celsiusToFahrenheit(celsius) as Integer
+	}
+}
+
+private Map getBatteryResult(rawValue) {
+	log.debug 'Battery'
+	def linkText = getLinkText(device)
+
+    def result = [:]
+
+	if (!(rawValue == 0 || rawValue == 255)) {
+		def volts = rawValue / 10
+		def minVolts = 2.1
+		def maxVolts = 3.0
+		def pct = (volts - minVolts) / (maxVolts - minVolts)
+		def roundedPct = Math.round(pct * 100)
+		result.value = Math.min(100, roundedPct)
+		result.descriptionText = "${linkText} battery was ${result.value}%"
+		result.name = 'battery'
+	}
+
+	return result
+}
+
+private Map getTemperatureResult(value) {
+	log.debug 'TEMP'
+	def linkText = getLinkText(device)
+	if (tempOffset) {
+		def offset = tempOffset as int
+		def v = value as int
+		value = v + offset
+	}
+	def descriptionText = "${linkText} was ${value}°${temperatureScale}"
+	return [
+		name: 'temperature',
+		value: value,
+		descriptionText: descriptionText,
+		unit: temperatureScale
+	]
+}
+
+private Map getContactResult(value) {
+	log.debug 'Contact Status'
+	def linkText = getLinkText(device)
+	def descriptionText = "${linkText} was ${value == 'open' ? 'opened' : 'closed'}"
+	return [
+		name: 'contact',
+		value: value,
+		descriptionText: descriptionText
+	]
+}
+
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+	return zigbee.readAttribute(0x0402, 0x0000) // Read the Temperature Cluster
+}
+
+def refresh()
+{
+	log.debug "Refreshing Temperature and Battery"
+	def refreshCmds = [
+
+        "st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
+		"st rattr 0x${device.deviceNetworkId} 1 1 0x20"
+
+	]
+
+	return refreshCmds + enrollResponse()
+}
+
+def configure() {
+	// Device-Watch allows 2 check-in misses from device
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
+		log.debug "Configuring Reporting, IAS CIE, and Bindings."
+	def enrollCmds = [
+    	"delay 1000",
+
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 1500",
+
+        //"raw 0x500 {01 23 00 00 00}", "delay 200",
+        //"send 0x${device.deviceNetworkId} 1 1", "delay 1500",
+	]
+    return enrollCmds + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) + refresh() // send refresh cmds as part of config
+}
+
+def enrollResponse() {
+	log.debug "Sending enroll response"
+    [
+
+	"raw 0x500 {01 23 00 00 00}", "delay 200",
+    "send 0x${device.deviceNetworkId} 1 1"
+
+    ]
+}
+private hex(value) {
+	new BigInteger(Math.round(value).toString()).toString(16)
+}
+
+private String swapEndianHex(String hex) {
+    reverseArray(hex.decodeHex()).encodeHex()
+}
+
+private byte[] reverseArray(byte[] array) {
+    int i = 0;
+    int j = array.length - 1;
+    byte tmp;
+    while (j > i) {
+        tmp = array[j];
+        array[j] = array[i];
+        array[i] = tmp;
+        j--;
+        i++;
+    }
+    return array
+}

smartapps/smartthings/button-controller.src/button-controller.groovy

@@ -27,9 +27,10 @@ definition(
 
 preferences {
 	page(name: "selectButton")
-	for (def i=1; i<=8; i++) {
+	page(name: "configureButton1")
-		page(name: "configureButton$i")
+	page(name: "configureButton2")
-	}
+	page(name: "configureButton3")
+	page(name: "configureButton4")
 
 	page(name: "timeIntervalInput", title: "Only during a certain time") {
 		section {
@@ -59,45 +60,22 @@ def selectButton() {
 	}
 }
 
-def createPage(pageNum) {
-	if ((state.numButton == pageNum) || (pageNum == 8))
-		state.installCondition = true
-	dynamicPage(name: "configureButton$pageNum", title: "Set up button $pageNum here",
-			nextPage: "configureButton${pageNum+1}", install: state.installCondition, uninstall: configured(), getButtonSections(pageNum))
-}
-
 def configureButton1() {
-	state.numButton = buttonDevice.currentState("numberOfButtons")?.longValue ?: 4
+	dynamicPage(name: "configureButton1", title: "Now let's decide how to use the first button",
-	log.debug "state variable numButton: ${state.numButton}"
+		nextPage: "configureButton2", uninstall: configured(), getButtonSections(1))
-	state.installCondition = false
-	createPage(1)
 }
 def configureButton2() {
-	createPage(2)
+	dynamicPage(name: "configureButton2", title: "If you have a second button, set it up here",
+		nextPage: "configureButton3", uninstall: configured(), getButtonSections(2))
 }
 
 def configureButton3() {
-	createPage(3)
+	dynamicPage(name: "configureButton3", title: "If you have a third button, you can do even more here",
+		nextPage: "configureButton4", uninstall: configured(), getButtonSections(3))
 }
-
 def configureButton4() {
-	createPage(4)
+	dynamicPage(name: "configureButton4", title: "If you have a fourth button, you rule, and can set it up here",
-}
+		install: true, uninstall: true, getButtonSections(4))
-
-def configureButton5() {
-	createPage(5)
-}
-
-def configureButton6() {
-	createPage(6)
-}
-
-def configureButton7() {
-	createPage(7)
-}
-
-def configureButton8() {
-	createPage(8)
 }
 
 def getButtonSections(buttonNumber) {

smartapps/smartthings/examples/every-element.src/every-element.groovy

@@ -202,8 +202,7 @@ def inputSelectionPage() {
 
         section("options variations") {
             paragraph "tap these elements and look at the differences when selecting an option"
-            input(type: "enum", name: "selectionSimple", title: "Simple options", description: "no separators in the selectable options", options: ["Thing 1", "Thing 2", "(Complicated) Thing 3"])
+            input(type: "enum", name: "selectionSimple", title: "Simple options", description: "no separators in the selectable options", groupedOptions: addGroup(englishOptions + spanishOptions))
-            input(type: "enum", name: "selectionSimpleGrouped", title: "Simple (Grouped) options", description: "no separators in the selectable options", groupedOptions: addGroup(englishOptions + spanishOptions))
             input(type: "enum", name: "selectionGrouped", title: "Grouped options", description: "separate groups of options with headers", groupedOptions: groupedOptions)
         }
 
@@ -215,15 +214,15 @@ def inputSelectionPage() {
 
         section("segmented") {
             paragraph "segmented should only work if there are either 2 or 3 options to choose from"
-            input(type: "enum", name: "selectionSegmented1", style: "segmented", title: "1 option", options: ["One"])
+            input(type: "enum", name: "selectionSegmented1", style: "segmented", title: "1 option", groupedOptions: addGroup(["One"]))
-            input(type: "enum", name: "selectionSegmented4", style: "segmented", title: "4 options", options: ["One", "Two", "Three", "Four"])
+            input(type: "enum", name: "selectionSegmented4", style: "segmented", title: "4 options", groupedOptions: addGroup(["One", "Two", "Three", "Four"]))
 
             paragraph "multiple and required will have no effect on segmented selection elements. There will always be exactly 1 option selected"
             input(type: "enum", name: "selectionSegmented2", style: "segmented", title: "2 options", options: ["One", "Two"])
             input(type: "enum", name: "selectionSegmented3", style: "segmented", title: "3 options", options: ["One", "Two", "Three"])
 
             paragraph "specifying defaultValue still works with segmented selection elements"
-            input(type: "enum", name: "selectionSegmentedWithDefault", style: "segmented", title: "defaulted to 'two'", options: ["One", "Two", "Three"], defaultValue: "Two")
+            input(type: "enum", name: "selectionSegmentedWithDefault", title: "defaulted to 'two'", groupedOptions: addGroup(["One", "Two", "Three"]), defaultValue: "Two")
         }
 
         section("required: true") {
@@ -232,8 +231,6 @@ def inputSelectionPage() {
 
         section("multiple: true") {
             input(type: "enum", name: "selectionMultiple", title: "This allows multiple selections", description: "It should look different when nothing is selected", groupedOptions: addGroup(["an option", "another option", "no way, one more?"]), multiple: true)
-            input(type: "enum", name: "selectionMultipleDefault1", title: "This allows multiple selections with a single default", description: "It should look different when nothing is selected", groupedOptions: addGroup(["an option", "another option", "no way, one more?"]), multiple: true, defaultValue: "an option")
-            input(type: "enum", name: "selectionMultipleDefault2", title: "This allows multiple selections with multiple defaults", description: "It should look different when nothing is selected", groupedOptions: addGroup(["an option", "another option", "no way, one more?"]), multiple: true, defaultValue: ["an option", "another option"])
         }
 
         section("with image") {

smartapps/smartthings/lifx-connect.src/lifx-connect.groovy

@@ -72,7 +72,7 @@ def authPage() {
 		log.debug "have LIFX access token"
 
 		def options = locationOptions() ?: []
-		def count = options.size().toString()
+		def count = options.size()
 
 		return dynamicPage(name:"Credentials", title:"", nextPage:"", install:true, uninstall: true) {
 			section("Select your location") {