Adding changes mentioned by @strelitzia123

devicedata has been deprecated in favor of getstationsdata and will be removed at the end of November.

*Note* I haven't actually tested this change due to time limitations. Someone should check this out and verify it behaves properly before merging.

README.md

@@ -1,10 +1,10 @@
-# SmartThings Public GitHub Repo
+# SmartThings Public Github Repo
 
 An official list of SmartApps and Device Types from SmartThings.
 
 Here are some links to help you get started coding right away:
 
-* [GitHub-specific Documentation](http://docs.smartthings.com/en/latest/tools-and-ide/github-integration.html)
+* [Github-specific Documentation](http://docs.smartthings.com/en/latest/tools-and-ide/github-integration.html)
 * [Full Documentation](http://docs.smartthings.com)
 * [IDE & Simulator](http://ide.smartthings.com)
 * [Community Forums](http://community.smartthings.com)

build.gradle

@@ -9,7 +9,7 @@ apply plugin: 'smartthings-slack'
 
 buildscript {
     dependencies {
-        classpath "com.smartthings.deployment:executable-deployment-scripts:1.0.12"
+        classpath "com.smartthings.deployment:executable-deployment-scripts:1.0.8"
     }
     repositories {
         mavenLocal()
@@ -19,7 +19,7 @@ buildscript {
                 username smartThingsArtifactoryUserName
                 password smartThingsArtifactoryPassword
             }
-            url "https://smartthings.jfrog.io/smartthings/libs-release-local"
+            url "https://artifactory.smartthings.com/libs-release-local"
         }
     }
 }
@@ -32,7 +32,7 @@ repositories {
             username smartThingsArtifactoryUserName
             password smartThingsArtifactoryPassword
         }
-        url "https://smartthings.jfrog.io/smartthings/libs-release-local"
+        url "https://artifactory.smartthings.com/libs-release-local"
     }
 }
 
@@ -51,10 +51,10 @@ sourceSets {
 
 dependencies {
     devicetypesCompile 'org.codehaus.groovy:groovy-all:2.4.7'
-    devicetypesCompile 'smartthings:appengine-z-wave:0.1.3'
+    devicetypesCompile 'smartthings:appengine-z-wave:0.1.2'
-    devicetypesCompile 'smartthings:appengine-zigbee:0.1.12'
+    devicetypesCompile 'smartthings:appengine-zigbee:0.1.11'
     smartappsCompile 'org.codehaus.groovy:groovy-all:2.4.7'
-    smartappsCompile 'smartthings:appengine-common:0.1.9'
+    smartappsCompile 'smartthings:appengine-common:0.1.8'
     smartappsCompile 'org.codehaus.groovy.modules.http-builder:http-builder:0.7.1'
     smartappsCompile 'org.grails:grails-web:2.3.11'
     smartappsCompile 'org.json:json:20140107'
@@ -74,19 +74,19 @@ slackSendMessage {
     String username
     switch (branch) {
         case 'master':
-            username = 'DEV'
+            username = 'Hickory'
             iconUrl = wolverine
             color = '#35D0F2'
             messageText = 'Began deployment of _SmartThingsPublic[master]_ branch to the _Dev_ environments.'
             break
         case 'staging':
-            username = 'STG'
+            username = 'Dickory'
             iconUrl = beach
             color = '#FFDE20'
             messageText = 'Began deployment of _SmartThingsPublic[staging]_ branch to the _Staging_ environments.'
             break
         case 'production':
-            username = 'PRD'
+            username = 'Dock'
             iconUrl = drinks
             color = '#FF1D23'
             messageText = 'Began deployment of _SmartThingsPublic[production]_ branch to the _Prod_ environments.'

devicetypes/capabilities/acceleration-sensor-capability.src/acceleration-sensor-capability.groovy

@@ -23,8 +23,8 @@ metadata {
 
 	tiles {
 		standardTile("acceleration", "device.acceleration", width: 2, height: 2) {
-			state("inactive", label:'${name}', icon:"st.motion.acceleration.inactive", backgroundColor:"#cccccc")
+			state("inactive", label:'${name}', icon:"st.motion.acceleration.inactive", backgroundColor:"#ffffff")
-			state("active", label:'${name}', icon:"st.motion.acceleration.active", backgroundColor:"#00A0DC")
+			state("active", label:'${name}', icon:"st.motion.acceleration.active", backgroundColor:"#53a7c0")
 		}
 
 		main "acceleration"

devicetypes/capabilities/contact-sensor-capability.src/contact-sensor-capability.groovy

@@ -23,8 +23,8 @@ metadata {
 
 	tiles {
 		standardTile("contact", "device.contact", width: 2, height: 2) {
-			state("closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#00A0DC")
+			state("closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821")
-			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#e86d13")
+			state("open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
 		}
 		main "contact"
 		details "contact"

devicetypes/capabilities/lock-capability.src/lock-capability.groovy

@@ -27,7 +27,7 @@ metadata {
 	tiles {
 		standardTile("toggle", "device.lock", width: 2, height: 2) {
 			state "unlocked", label:'unlocked', action:"lock.lock", icon:"st.locks.lock.unlocked", backgroundColor:"#ffffff"
-			state "locked", label:'locked', action:"lock.unlock", icon:"st.locks.lock.locked", backgroundColor:"#00A0DC"
+			state "locked", label:'locked', action:"lock.unlock", icon:"st.locks.lock.locked", backgroundColor:"#79b821"
 		}
 		standardTile("lock", "device.lock", inactiveLabel: false, decoration: "flat") {
 			state "default", label:'lock', action:"lock.lock", icon:"st.locks.lock.locked"

devicetypes/capabilities/momentary-capability.src/momentary-capability.groovy

@@ -29,7 +29,7 @@ metadata {
 	tiles {
 		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
 			state "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState: "on"
-			state "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#00A0DC"
+			state "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821"
 		}
 		main "switch"
 		details "switch"

devicetypes/capabilities/motion-sensor-capability.src/motion-sensor-capability.groovy

@@ -24,7 +24,7 @@ metadata {
 	tiles {
 		standardTile("motion", "device.motion", width: 2, height: 2) {
 			state("inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff")
-			state("active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#00A0DC")
+			state("active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0")
 		}
 		main "motion"
 		details "motion"

devicetypes/capabilities/presence-sensor-capability.src/presence-sensor-capability.groovy

@@ -24,7 +24,7 @@ metadata {
 	tiles {
 		standardTile("presence", "device.presence", width: 2, height: 2) {
 			state("not present", label:'not present', icon:"st.presence.tile.not-present", backgroundColor:"#ffffff")
-			state("present", label:'present', icon:"st.presence.tile.present", backgroundColor:"#00A0DC")
+			state("present", label:'present', icon:"st.presence.tile.present", backgroundColor:"#53a7c0")
 		}
 		main "presence"
 		details "presence"

devicetypes/capabilities/switch-capability.src/switch-capability.groovy

@@ -31,7 +31,7 @@ metadata {
 	tiles {
 		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
 			state "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff"
-			state "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#00A0DC"
+			state "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821"
 		}
 		main "switch"
 		details "switch"

devicetypes/capabilities/switch-level-capability.src/switch-level-capability.groovy

@@ -35,8 +35,8 @@ metadata {
 	tiles {
 		standardTile("switch", "device.switch", width: 2, height: 2) {
 			state "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
-			state "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#00A0DC", nextState:"turningOff"
+			state "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
-			state "turningOn", label:'${name}', icon:"st.switches.switch.on", backgroundColor:"#00A0DC"
+			state "turningOn", label:'${name}', icon:"st.switches.switch.on", backgroundColor:"#79b821"
 			state "turningOff", label:'${name}', icon:"st.switches.switch.off", backgroundColor:"#ffffff"
 		}
 		controlTile("levelSliderControl", "device.level", "slider", height: 2, width: 1, inactiveLabel: false) {

devicetypes/capabilities/thermostat-capability.src/thermostat-capability.groovy

@@ -79,8 +79,8 @@ metadata {
 		standardTile("mode", "device.thermostatMode", inactiveLabel: false, decoration: "flat") {
 			state "off", label:'${name}', action:"thermostat.emergencyHeat", backgroundColor:"#ffffff"
 			state "emergencyHeat", label:'${name}', action:"thermostat.heat", backgroundColor:"#e86d13"
-			state "heat", label:'${name}', action:"thermostat.cool", backgroundColor:"#e86d13"
+			state "heat", label:'${name}', action:"thermostat.cool", backgroundColor:"#ffc000"
-			state "cool", label:'${name}', action:"thermostat.off", backgroundColor:"#00A0DC"
+			state "cool", label:'${name}', action:"thermostat.off", backgroundColor:"#269bd2"
 		}
 		standardTile("fanMode", "device.thermostatFanMode", inactiveLabel: false, decoration: "flat") {
 			state "fanAuto", label:'${name}', action:"thermostat.fanOn", backgroundColor:"#ffffff"

devicetypes/capabilities/water-sensor-capability.src/water-sensor-capability.groovy

@@ -24,7 +24,7 @@ metadata {
 	tiles {
 		standardTile("water", "device.water", width: 2, height: 2) {
 			state "dry", icon:"st.alarm.water.dry", backgroundColor:"#ffffff"
-			state "wet", icon:"st.alarm.water.wet", backgroundColor:"#00A0DC"
+			state "wet", icon:"st.alarm.water.wet", backgroundColor:"#53a7c0"
 		}
 
 		main "water"

devicetypes/com-obycode/beaconthing.src/beaconthing.groovy

@@ -37,7 +37,7 @@ metadata {
 
 	tiles {
 		standardTile("presence", "device.presence", width: 2, height: 2, canChangeBackground: true) {
-			state("present", labelIcon:"st.presence.tile.present", backgroundColor:"#00A0DC")
+			state("present", labelIcon:"st.presence.tile.present", backgroundColor:"#53a7c0")
 			state("not present", labelIcon:"st.presence.tile.not-present", backgroundColor:"#ffffff")
 		}
 		valueTile("inRange", "device.inRangeFriendly", inactiveLabel: true, height:1, width:3, decoration: "flat") {

devicetypes/com-obycode/obything-music.src/obything-music.groovy

@@ -38,7 +38,7 @@ metadata {
 		// Main
 		standardTile("main", "device.status", width: 1, height: 1, canChangeIcon: true) {
 			state "paused", label:'Paused', action:"music Player.play", icon:"st.Electronics.electronics19", nextState:"playing", backgroundColor:"#ffffff"
-			state "playing", label:'Playing', action:"music Player.pause", icon:"st.Electronics.electronics19", nextState:"paused", backgroundColor:"#00A0DC"
+			state "playing", label:'Playing', action:"music Player.pause", icon:"st.Electronics.electronics19", nextState:"paused", backgroundColor:"#79b821"
 		}
 
 		// Row 1

devicetypes/drzwave/ezmultipli.src/.st-ignore

@@ -1,2 +0,0 @@
-.st-ignore
-README.md

devicetypes/drzwave/ezmultipli.src/README.md

@@ -1,44 +0,0 @@
-# Express Controls EZMultiPli
-
-Works with: 
-
-* [Express Controls EZMultiPli](https://www.smartthings.com/works-with-smartthings/)
-
-## Table of contents
-
-* [Release Notes](#release-notes)
-* [Capabilities](#capabilities)
-* [Troubleshooting](#troubleshooting)
-
-## Release Notes
-
-* **2017-04-19** - _dkirker_ - Update default config values in config value range check functions, use lux if lum option is null, fix NullPointerException on initial pairing when color data has not been set (and set the default color data!)
-* **2017-04-10** - _DrZwave_ (with help from Donald Kirker) - changed fingerprint to the new format, lowered the OnTime and other parameters to be "more in line with ST user expectations", get the luminance in LUX so it reports in lux all the time.
-* **2016-10-06** - _erocm1231_ - Added "updated" method to run when configuration options are changed. Depending on model of unit, luminance is being reported as a relative percentace or as a lux value. Added the option to configure this in the handler.
-* **2016-01-28** - _erocm1231_ - Changed the configuration method to use scaledConfiguration so that it properly formatted negative numbers. Also, added configurationGet and a configurationReport method so that config values can be verified.
-* **2015-12-04** - _erocm1231_ - added range value to preferences as suggested by @Dela-Rick.
-* **2015-11-26** - _erocm1231_ - Fixed null condition error when adding as a new device. 
-* **2015-11-24** - _erocm1231_ - Added refresh command. Made a few changes to how the handler maps colors to the LEDs. Fixed the device not having its on/off status updated when colors are changed.
-* **2015-11-23** - _erocm1231_ - Changed the look to match SmartThings v2 devices. 
-* **2015-11-21** - _erocm1231_ - Made code much more efficient. Also made it compatible when setColor is passed a hex value. Mapping of special colors: Soft White - Default - Yellow, White - Concentrate - White, Daylight - Energize - Teal, Warm White - Relax - Yellow
-* **2015-11-19** - _erocm1231_ - Fixed a couple incorrect colors, changed setColor to be more compatible with other apps
-* **2015-11-18** - _erocm1231_ - Added to setColor for compatibility with Smart Lighting
-* **v0.1.0** - _DrZWave_ - chose better icons, Got color LED to work - first fully functional version
-* **v0.0.9** - _jrs_ - got the temp and luminance to work. Motion works. Debugging the color wheel.
-* **v0.0.8** - _DrZWave_ 2/25/2015 - change the color control to be tiles since there are only 8 colors.
-* **v0.0.7** - _jrs_ - 02/23/2015 - Jim Sulin
-
-## Capabilities
-
-* **Actuator** - represents that a Device has commands
-* **Sensor** - detects sensor events
-* **Motion Sensor** - can detect motion
-* **Temperature Measurement** - defines device measures current temperature
-* **Illuminance Measurement** - gives the illuminance reading from devices that support it
-* **Switch** - can detect state (possible values: on/off)
-* **Color Control** - represents that the color attributes of a device can be controlled (hue, saturation, color value
-* **Configuration** - configure() command called when device is installed or device preferences updated
-* **Refresh** - refresh() command for status updates
-
-## Troubleshooting
-

devicetypes/drzwave/ezmultipli.src/ezmultipli.groovy

@@ -1,405 +0,0 @@
-// Express Controls EZMultiPli Multi-sensor 
-// Motion Sensor - Temperature - Light level - 8 Color Indicator LED - Z-Wave Range Extender - Wall Powered
-// driver for SmartThings
-// The EZMultiPli is also known as the HSM200 from HomeSeer.com
-
-metadata {
-	definition (name: "EZmultiPli", namespace: "DrZWave", author: "Eric Ryherd", oauth: true) {
-	capability "Actuator"
-	capability "Sensor"
-	capability "Motion Sensor"
-	capability "Temperature Measurement"
-	capability "Illuminance Measurement"
-	capability "Switch"
-	capability "Color Control"
-	capability "Configuration"
-    capability "Refresh"
-
-	fingerprint mfr: "001E", prod: "0004", model: "0001" // new format for Fingerprint which is unique for every certified Z-Wave product
-	} // end definition
-
-	simulator {
-		// messages the device returns in response to commands it receives
-		status "motion"     : "command: 7105000000FF07, payload: 07"
-		status "no motion"  : "command: 7105000000FF07, payload: 00"
-
-		for (int i = 0; i <= 100; i += 20) {
-			status "temperature ${i}F": new physicalgraph.zwave.Zwave().sensorMultilevelV5.sensorMultilevelReport(
-				scaledSensorValue: i, precision: 1, sensorType: 1, scale: 1).incomingMessage()
-		}
-		for (int i = 0; i <= 100; i += 20) {
-			status "luminance ${i} %": new physicalgraph.zwave.Zwave().sensorMultilevelV5.sensorMultilevelReport(
-				scaledSensorValue: i, precision: 0, sensorType: 3).incomingMessage()
-		}
-
-	} //end simulator
-
-    
-    tiles (scale: 2){      
-		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
-			tileAttribute ("device.switch", key: "PRIMARY_CONTROL", icon: "st.Lighting.light18") {
-				attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#00A0DC", nextState:"turningOff"
-				attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
-				attributeState "turningOn", label:'${name}', icon:"st.switches.light.on", backgroundColor:"#00A0DC"
-				attributeState "turningOff", label:'${name}', icon:"st.switches.light.off", backgroundColor:"#ffffff"
-			}
-			tileAttribute ("device.color", key: "COLOR_CONTROL") {
-				attributeState "color", action:"setColor"
-			}
-			tileAttribute ("statusText", key: "SECONDARY_CONTROL") {
-				attributeState "statusText", label:'${currentValue}'
-			}
-        }
-
-		standardTile("motion", "device.motion", width: 2, height: 2, canChangeIcon: true, canChangeBackground: true) {
-			state "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#00A0DC"
-			state "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#cccccc"
-		}
-		valueTile("temperature", "device.temperature", width: 2, height: 2) {
-			state "temperature", label:'${currentValue}°', unit:"F", icon:"", // would be better if the units would switch to the desired units of the system (imperial or metric)
-			backgroundColors:[
-				[value: 0,  color: "#153591"], // blue=cold
-				[value: 65, color: "#44b621"], // green
-				[value: 70, color: "#44b621"], // green
-				[value: 75, color: "#f1d801"], // yellow
-				[value: 80, color: "#f1d801"], // yellow
-				[value: 85, color: "#f1d801"], // yellow
-				[value: 90, color: "#d04e00"], // red
-				[value: 95, color: "#bc2323"]  // red=hot
-			]
-		}
-
-        // icons to use would be st.Weather.weather2 or st.alarm.temperature.normal - see http://scripts.3dgo.net/smartthings/icons/ for a list of icons
-		valueTile("illuminance", "device.illuminance", width: 2, height: 2, inactiveLabel: false) {
-// jrs 4/7/2015 - Null on display
-			//state "luminosity", label:'${currentValue} ${unit}'
-			state "luminosity", label:'${currentValue}', unit:'${currentValue}', icon:"",
-			backgroundColors:[
-				[value: 25, color: "#404040"],
-				[value: 50, color: "#808080"],
-				[value: 75, color: "#a0a0a0"],
-				[value: 90, color: "#e0e0e0"],
-                //lux measurement values
-                [value: 150, color: "#404040"],
-				[value: 300, color: "#808080"],
-				[value: 600, color: "#a0a0a0"],
-				[value: 900, color: "#e0e0e0"]
-			]
-		}
-		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-		}    
-		standardTile("configure", "device.configure", inactiveLabel: false, width: 2, height: 2, decoration: "flat") {
-			state "configure", label:'', action:"configuration.configure", icon:"st.secondary.configure"
-		}
-
-		main (["temperature","motion", "switch"])
-		details(["switch", "motion", "temperature", "illuminance", "refresh", "configure"])
-	}  // end tiles
-    
-	preferences {
-       input "OnTime",  "number", title: "No Motion Interval", description: "N minutes lights stay on after no motion detected [0, 1-127]", range: "0..127", defaultValue: 2, displayDuringSetup: true, required: false
-       input "OnLevel", "number", title: "Dimmer Onlevel", description: "Dimmer OnLevel for associated node 2 lights [-1, 0, 1-99]", range: "-1..99", defaultValue: -1, displayDuringSetup: true, required: false
-       input "LiteMin", "number", title: "Luminance Report Frequency", description: "Luminance report sent every N minutes [0-127]", range: "0..127", defaultValue: 6, displayDuringSetup: true, required: false
-       input "TempMin", "number", title: "Temperature Report Frequency", description: "Temperature report sent every N minutes [0-127]", range: "0..127", defaultValue: 6, displayDuringSetup: true, required: false
-       input "TempAdj", "number", title: "Temperature Calibration", description: "Adjust temperature up/down N tenths of a degree F [(-127)-(+128)]", range: "-127..128", defaultValue: 0, displayDuringSetup: true, required: false
-       input("lum", "enum", title:"Illuminance Measurement", description: "Percent or Lux", defaultValue: 2 ,required: false, displayDuringSetup: true, options:
-          [1:"Percent",
-           2:"Lux"])
-  }
-
-} // end metadata
-
-// Parse incoming device messages from device to generate events
-def parse(String description){
-	//log.debug "==> New Zwave Event: ${description}"
-	def result = []
-	def cmd = zwave.parse(description, [0x31: 5]) // 0x31=SensorMultilevel which we force to be version 5
-	if (cmd) {
-		def cmdData = zwaveEvent(cmd)
-		if (cmdData != [:])
-			result << createEvent(cmdData)
-	}
-    
-    def statusTextmsg = ""
-    if (device.currentState('temperature') != null && device.currentState('illuminance') != null) {
-		statusTextmsg = "${device.currentState('temperature').value} ° - ${device.currentState('illuminance').value} ${(lum == 1) ? "%" : "LUX"}"
-    	sendEvent("name":"statusText", "value":statusTextmsg, displayed:false)
-	}
-    if (result != [null] && result != []) log.debug "Parse returned ${result}"
-    
-    
-	return result
-}
-
-
-// Event Generation
-def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv5.SensorMultilevelReport cmd){
-	def map = [:]
-	switch (cmd.sensorType) {
-		case 0x01:				// SENSOR_TYPE_TEMPERATURE_VERSION_1
-			def cmdScale = cmd.scale == 1 ? "F" : "C"
-			map.value = convertTemperatureIfNeeded(cmd.scaledSensorValue, cmdScale, cmd.precision)
-			map.unit = getTemperatureScale()
-			map.name = "temperature"
-			log.debug "Temperature report"
-			break;
-		case 0x03 :				// SENSOR_TYPE_LUMINANCE_VERSION_1
-			map.value = cmd.scaledSensorValue.toInteger().toString()
-            if(lum == 1) map.unit = "%"
-            else map.unit = "lux"
-			map.name = "illuminance"
-			log.debug "Luminance report"
-			break;
-	}
-	return map
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.configurationv2.ConfigurationReport cmd) {
-    log.debug "${device.displayName} parameter '${cmd.parameterNumber}' with a byte size of '${cmd.size}' is set to '${cmd.configurationValue}'"
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cmd) {
-	def map = [:]
-	if (cmd.notificationType==0x07) {	// NOTIFICATION_TYPE_BURGLAR
-    		if (cmd.event==0x07 || cmd.event==0x08) {
-			map.name = "motion"
-            	map.value = "active"
-			map.descriptionText = "$device.displayName motion detected"
-            	log.debug "motion recognized"
-		} else if (cmd.event==0) {
-			map.name = "motion"
-            	map.value = "inactive"
-			map.descriptionText = "$device.displayName no motion detected"
-            	log.debug "No motion recognized"
-    		}
-	} 
-	if (map.name != "motion") {
-    		log.debug "unmatched parameters for cmd: ${cmd.toString()}}"
-	}
-	return map
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) {
-    // The EZMultiPli sets the color back to #ffffff on "off" or at init, so update the ST device to reflect this.
-    if (device.latestState("color") == null || (cmd.value == 0 && device.latestState("color").value != "#ffffff")) {
-        sendEvent(name: "color", value: "#ffffff", displayed: true)
-    }
-    [name: "switch", value: cmd.value ? "on" : "off", type: "digital"]
-}
-
-def updated()
-{
-    log.debug "updated() is being called"
-    
-    def cmds = configure()
-    
-    if (cmds != []) response(cmds)
-}
-
-def on() {
-	log.debug "Turning Light 'on'"
-	delayBetween([
-		zwave.basicV1.basicSet(value: 0xFF).format(),
-		zwave.basicV1.basicGet().format()
-	], 500)
-}
-
-def off() {
-	log.debug "Turning Light 'off'"
-	delayBetween([
-		zwave.basicV1.basicSet(value: 0x00).format(),
-		zwave.basicV1.basicGet().format()
-	], 500)
-}
-
-
-def setColor(value) {
-    log.debug "setColor() : ${value}"
-    def myred
-    def mygreen
-    def myblue
-    def hexValue
-    def cmds = []
-
-    if ( value.level == 1 && value.saturation > 20) {
-		def rgb = huesatToRGB(value.hue as Integer, 100)
-        myred = rgb[0] >=128 ? 255 : 0
-        mygreen = rgb[1] >=128 ? 255 : 0
-        myblue = rgb[2] >=128 ? 255 : 0
-    } 
-    else if ( value.level > 1 ) {
-		def rgb = huesatToRGB(value.hue as Integer, value.saturation as Integer)
-        myred = rgb[0] >=128 ? 255 : 0
-        mygreen = rgb[1] >=128 ? 255 : 0
-        myblue = rgb[2] >=128 ? 255 : 0
-    } 
-    else if (value.hex) {
-		def rgb = value.hex.findAll(/[0-9a-fA-F]{2}/).collect { Integer.parseInt(it, 16) }
-        myred = rgb[0] >=128 ? 255 : 0
-        mygreen = rgb[1] >=128 ? 255 : 0
-        myblue = rgb[2] >=128 ? 255 : 0
-    }
-    else {
-        myred=value.red >=128 ? 255 : 0	// the EZMultiPli has just on/off for each of the 3 channels RGB so convert the 0-255 value into 0 or 255.
-        mygreen=value.green >=128 ? 255 : 0
-        myblue=value.blue>=128 ? 255 : 0
-    }
-    //log.debug "Red: ${myred} Green: ${mygreen} Blue: ${myblue}"
-  	//cmds << zwave.colorControlV1.stateSet(stateDataLength: 3, VariantGroup1: [0x02, myred], VariantGroup2:[ 0x03, mygreen], VariantGroup3:[0x04,myblue]).format() // ST support for this command as of 2015/02/23 does not support the color IDs so this command cannot be used.
-    // So instead we'll use these commands to hack around the lack of support of the above command
-	cmds << zwave.basicV1.basicSet(value: 0x00).format() // As of 2015/02/23 ST is not supporting stateSet properly but found this hack that works. 
-	if (myred!=0) {
-       	cmds << zwave.colorControlV1.startCapabilityLevelChange(capabilityId: 0x02, startState: myred, ignoreStartState: True, updown: True).format()
-		cmds << zwave.colorControlV1.stopStateChange(capabilityId: 0x02).format()
-    }
-    if (mygreen!=0) {
-	 	cmds << zwave.colorControlV1.startCapabilityLevelChange(capabilityId: 0x03, startState: mygreen, ignoreStartState: True, updown: True).format()
-	 	cmds << zwave.colorControlV1.stopStateChange(capabilityId: 0x03).format()
-    }
-    if (myblue!=0) {
-		cmds << zwave.colorControlV1.startCapabilityLevelChange(capabilityId: 0x04, startState: myblue, ignoreStartState: True, updown: True).format()
-		cmds << zwave.colorControlV1.stopStateChange(capabilityId: 0x04).format()
-    }
-    cmds << zwave.basicV1.basicGet().format()
-    hexValue = rgbToHex([r:myred, g:mygreen, b:myblue])
-    if(hexValue) sendEvent(name: "color", value: hexValue, displayed: true)
-    delayBetween(cmds, 100)
-}
-
-def zwaveEvent(physicalgraph.zwave.Command cmd) {
-	// Handles all Z-Wave commands we aren't interested in
-	[:]
-}
-
-// ensure we are passing acceptable param values for LiteMin & TempMin configs
-def checkLiteTempInput(value) {
-	if (value == null) {
-    	value=6
-    }
-    def liteTempVal = value.toInteger()
-    switch (liteTempVal) {
-      case { it < 0 }:
-        return 6			// bad value, set to default
-        break
-      case { it > 127 }:
-        return 127			// bad value, greater then MAX, set to MAX
-        break
-      default:
-        return liteTempVal	// acceptable value
-    }
-}
-
-// ensure we are passing acceptable param value for OnTime config
-def checkOnTimeInput(value) {
-	if (value == null) {
-    	value=2
-    }
-    def onTimeVal = value.toInteger()
-    switch (onTimeVal) {
-      case { it < 0 }:
-        return 2			// bad value set to default
-        break
-      case { it > 127 }:
-        return 127			// bad value, greater then MAX, set to MAX
-        break
-      default:
-        return onTimeVal	// acceptable value
-    }
-}
-
-// ensure we are passing acceptable param value for OnLevel config
-def checkOnLevelInput(value) {
-	if (value == null) {
-    	value=99
-    }  
-    def onLevelVal = value.toInteger()
-    switch (onLevelVal) {
-      case { it < -1 }:
-        return -1			// bad value set to default
-        break
-      case { it > 99 }:
-        return 99			// bad value, greater then MAX, set to MAX
-        break
-      default:
-        return onLevelVal	// acceptable value
-    }
-}
-
-
-// ensure we are passing an acceptable param value for TempAdj configs
-def checkTempAdjInput(value) {
-	if (value == null) {
-    	value=0
-    }
-	def tempAdjVal = value.toInteger()
-    switch (tempAdjVal) {
-      case { it < -127 }:
-        return 0			// bad value, set to default
-        break
-      case { it > 128 }:
-        return 128			// bad value, greater then MAX, set to MAX
-        break
-      default:
-        return tempAdjVal	// acceptable value
-    }
-}
-
-def refresh() {
-	def cmd = []
-    cmd << zwave.switchColorV3.switchColorGet().format()
-    cmd << zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType:1, scale:1).format()
-    cmd << zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType:3, scale:1).format()
-    cmd << zwave.basicV1.basicGet().format()
-    delayBetween(cmd, 1000)
-}
-
-def configure() {
-	log.debug "OnTime=${settings.OnTime} OnLevel=${settings.OnLevel} TempAdj=${settings.TempAdj}"
-	def cmd = delayBetween([
-		zwave.configurationV1.configurationSet(parameterNumber: 1, size: 1, scaledConfigurationValue: checkOnTimeInput(settings.OnTime)).format(),
-		zwave.configurationV1.configurationSet(parameterNumber: 2, size: 1, scaledConfigurationValue: checkOnLevelInput(settings.OnLevel)).format(),
-		zwave.configurationV1.configurationSet(parameterNumber: 3, size: 1, scaledConfigurationValue: checkLiteTempInput(settings.LiteMin)).format(),
-		zwave.configurationV1.configurationSet(parameterNumber: 4, size: 1, scaledConfigurationValue: checkLiteTempInput(settings.TempMin)).format(),
-		zwave.configurationV1.configurationSet(parameterNumber: 5, size: 1, scaledConfigurationValue: checkTempAdjInput(settings.TempAdj)).format(),
-		zwave.configurationV1.configurationGet(parameterNumber: 1).format(),
-		zwave.configurationV1.configurationGet(parameterNumber: 2).format(),
-		zwave.configurationV1.configurationGet(parameterNumber: 3).format(),
-		zwave.configurationV1.configurationGet(parameterNumber: 4).format(),
-		zwave.configurationV1.configurationGet(parameterNumber: 5).format()
-	], 100)
-	//log.debug cmd
-	cmd + refresh()
-}
-
-def huesatToRGB(float hue, float sat) {
-	while(hue >= 100) hue -= 100
-	int h = (int)(hue / 100 * 6)
-	float f = hue / 100 * 6 - h
-	int p = Math.round(255 * (1 - (sat / 100)))
-	int q = Math.round(255 * (1 - (sat / 100) * f))
-	int t = Math.round(255 * (1 - (sat / 100) * (1 - f)))
-	switch (h) {
-		case 0: return [255, t, p]
-		case 1: return [q, 255, p]
-		case 2: return [p, 255, t]
-		case 3: return [p, q, 255]
-		case 4: return [t, p, 255]
-		case 5: return [255, p, q]
-	}
-}
-def rgbToHex(rgb) {
-    def r = hex(rgb.r)
-    def g = hex(rgb.g)
-    def b = hex(rgb.b)
-    def hexColor = "#${r}${g}${b}"
-    
-    hexColor
-}
-private hex(value, width=2) {
-	def s = new BigInteger(Math.round(value).toString()).toString(16)
-	while (s.size() < width) {
-		s = "0" + s
-	}
-	s
-}

devicetypes/erocm123/inovelli-2-channel-smart-plug.src/inovelli-2-channel-smart-plug.groovy

@@ -1,268 +0,0 @@
-/**
- *
- *  Inovelli 2-Channel Smart Plug
- *
- *  github: Eric Maycock (erocm123)
- *  Date: 2017-04-27
- *  Copyright Eric Maycock
- *
- *  Includes all configuration parameters and ease of advanced configuration.
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-metadata {
-	definition(name: "Inovelli 2-Channel Smart Plug", namespace: "erocm123", author: "Eric Maycock") {
-		capability "Actuator"
-		capability "Sensor"
-		capability "Switch"
-		capability "Polling"
-		capability "Refresh"
-		capability "Health Check"
-
-		fingerprint manufacturer: "015D", prod: "0221", model: "251C", deviceJoinName: "Show Home 2-Channel Smart Plug"
-		fingerprint manufacturer: "0312", prod: "B221", model: "251C", deviceJoinName: "Inovelli 2-Channel Smart Plug"
-	}
-	simulator {}
-	preferences {}
-	tiles {
-		multiAttributeTile(name: "switch", type: "lighting", width: 6, height: 4, canChangeIcon: true) {
-			tileAttribute("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState: "turningOn"
-				attributeState "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#00a0dc", nextState: "turningOff"
-				attributeState "turningOff", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState: "turningOn"
-				attributeState "turningOn", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#00a0dc", nextState: "turningOff"
-			}
-		}
-		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "default", label: "", action: "refresh.refresh", icon: "st.secondary.refresh"
-		}
-		main(["switch"])
-		details(["switch",
-				 childDeviceTiles("all"), "refresh"
-		])
-	}
-}
-def parse(String description) {
-	def result = []
-	def cmd = zwave.parse(description)
-	if (cmd) {
-		result += zwaveEvent(cmd)
-		logging("Parsed ${cmd} to ${result.inspect()}", 1)
-	} else {
-		logging("Non-parsed event: ${description}", 2)
-	}
-	return result
-}
-def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd, ep = null) {
-	logging("BasicReport ${cmd} - ep ${ep}", 2)
-	if (ep) {
-		def event
-		childDevices.each {
-			childDevice ->
-				if (childDevice.deviceNetworkId == "$device.deviceNetworkId-ep$ep") {
-					childDevice.sendEvent(name: "switch", value: cmd.value ? "on" : "off")
-				}
-		}
-		if (cmd.value) {
-			event = [createEvent([name: "switch", value: "on"])]
-		} else {
-			def allOff = true
-			childDevices.each {
-				n ->
-					if (n.currentState("switch").value != "off") allOff = false
-			}
-			if (allOff) {
-				event = [createEvent([name: "switch", value: "off"])]
-			} else {
-				event = [createEvent([name: "switch", value: "on"])]
-			}
-		}
-		return event
-	}
-}
-def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd) {
-	logging("BasicSet ${cmd}", 2)
-	def result = createEvent(name: "switch", value: cmd.value ? "on" : "off", type: "digital")
-	def cmds = []
-	cmds << encap(zwave.switchBinaryV1.switchBinaryGet(), 1)
-	cmds << encap(zwave.switchBinaryV1.switchBinaryGet(), 2)
-	return [result, response(commands(cmds))] // returns the result of reponse()
-}
-def zwaveEvent(physicalgraph.zwave.commands.switchbinaryv1.SwitchBinaryReport cmd, ep = null) {
-	logging("SwitchBinaryReport ${cmd} - ep ${ep}", 2)
-	if (ep) {
-		def event
-		def childDevice = childDevices.find {
-			it.deviceNetworkId == "$device.deviceNetworkId-ep$ep"
-		}
-		if (childDevice) childDevice.sendEvent(name: "switch", value: cmd.value ? "on" : "off")
-		if (cmd.value) {
-			event = [createEvent([name: "switch", value: "on"])]
-		} else {
-			def allOff = true
-			childDevices.each {
-				n->
-					if (n.currentState("switch").value != "off") allOff = false
-			}
-			if (allOff) {
-				event = [createEvent([name: "switch", value: "off"])]
-			} else {
-				event = [createEvent([name: "switch", value: "on"])]
-			}
-		}
-		return event
-	} else {
-		def result = createEvent(name: "switch", value: cmd.value ? "on" : "off", type: "digital")
-		def cmds = []
-		cmds << encap(zwave.switchBinaryV1.switchBinaryGet(), 1)
-		cmds << encap(zwave.switchBinaryV1.switchBinaryGet(), 2)
-		return [result, response(commands(cmds))] // returns the result of reponse()
-	}
-}
-def zwaveEvent(physicalgraph.zwave.commands.multichannelv3.MultiChannelCmdEncap cmd) {
-	logging("MultiChannelCmdEncap ${cmd}", 2)
-	def encapsulatedCommand = cmd.encapsulatedCommand([0x32: 3, 0x25: 1, 0x20: 1])
-	if (encapsulatedCommand) {
-		zwaveEvent(encapsulatedCommand, cmd.sourceEndPoint as Integer)
-	}
-}
-def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
-	logging("ManufacturerSpecificReport ${cmd}", 2)
-	def msr = String.format("%04X-%04X-%04X", cmd.manufacturerId, cmd.productTypeId, cmd.productId)
-	logging("msr: $msr", 2)
-	updateDataValue("MSR", msr)
-}
-def zwaveEvent(physicalgraph.zwave.Command cmd) {
-	// This will capture any commands not handled by other instances of zwaveEvent
-	// and is recommended for development so you can see every command the device sends
-	logging("Unhandled Event: ${cmd}", 2)
-}
-def on() {
-	logging("on()", 1)
-	commands([
-			zwave.switchAllV1.switchAllOn(),
-			encap(zwave.switchBinaryV1.switchBinaryGet(), 1),
-			encap(zwave.switchBinaryV1.switchBinaryGet(), 2)
-	])
-}
-def off() {
-	logging("off()", 1)
-	commands([
-			zwave.switchAllV1.switchAllOff(),
-			encap(zwave.switchBinaryV1.switchBinaryGet(), 1),
-			encap(zwave.switchBinaryV1.switchBinaryGet(), 2)
-	])
-}
-void childOn(String dni) {
-	logging("childOn($dni)", 1)
-	def cmds = []
-	cmds << new physicalgraph.device.HubAction(command(encap(zwave.basicV1.basicSet(value: 0xFF), channelNumber(dni))))
-	cmds << new physicalgraph.device.HubAction(command(encap(zwave.switchBinaryV1.switchBinaryGet(), channelNumber(dni))))
-	sendHubCommand(cmds, 1000)
-}
-void childOff(String dni) {
-	logging("childOff($dni)", 1)
-	def cmds = []
-	cmds << new physicalgraph.device.HubAction(command(encap(zwave.basicV1.basicSet(value: 0x00), channelNumber(dni))))
-	cmds << new physicalgraph.device.HubAction(command(encap(zwave.switchBinaryV1.switchBinaryGet(), channelNumber(dni))))
-	sendHubCommand(cmds, 1000)
-}
-void childRefresh(String dni) {
-	logging("childRefresh($dni)", 1)
-	def cmds = []
-	cmds << new physicalgraph.device.HubAction(command(encap(zwave.switchBinaryV1.switchBinaryGet(), channelNumber(dni))))
-	sendHubCommand(cmds, 1000)
-}
-def poll() {
-	logging("poll()", 1)
-	commands([
-			encap(zwave.switchBinaryV1.switchBinaryGet(), 1),
-			encap(zwave.switchBinaryV1.switchBinaryGet(), 2),
-	])
-}
-def refresh() {
-	logging("refresh()", 1)
-	commands([
-			encap(zwave.switchBinaryV1.switchBinaryGet(), 1),
-			encap(zwave.switchBinaryV1.switchBinaryGet(), 2),
-	])
-}
-def ping() {
-	logging("ping()", 1)
-	refresh()
-}
-def installed() {
-	logging("installed()", 1)
-	command(zwave.manufacturerSpecificV1.manufacturerSpecificGet())
-	createChildDevices()
-}
-def updated() {
-	logging("updated()", 1)
-	if (!childDevices) {
-		createChildDevices()
-	} else if (device.label != state.oldLabel) {
-		childDevices.each {
-			if (it.label == "${state.oldLabel} (CH${channelNumber(it.deviceNetworkId)})") {
-				def newLabel = "${device.displayName} (CH${channelNumber(it.deviceNetworkId)})"
-				it.setLabel(newLabel)
-			}
-		}
-		state.oldLabel = device.label
-	}
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-	sendEvent(name: "needUpdate", value: device.currentValue("needUpdate"), displayed: false, isStateChange: true)
-}
-def zwaveEvent(physicalgraph.zwave.commands.configurationv2.ConfigurationReport cmd) {
-	logging("${device.displayName} parameter '${cmd.parameterNumber}' with a byte size of '${cmd.size}' is set to '${cmd2Integer(cmd.configurationValue)}'", 2)
-}
-private encap(cmd, endpoint) {
-	if (endpoint) {
-		zwave.multiChannelV3.multiChannelCmdEncap(destinationEndPoint: endpoint).encapsulate(cmd)
-	} else {
-		cmd
-	}
-}
-private command(physicalgraph.zwave.Command cmd) {
-	if (state.sec) {
-		zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
-	} else {
-		cmd.format()
-	}
-}
-private commands(commands, delay = 1000) {
-	delayBetween(commands.collect {
-		command(it)
-	}, delay)
-}
-private channelNumber(String dni) {
-	dni.split("-ep")[-1] as Integer
-}
-private void createChildDevices() {
-	state.oldLabel = device.label
-	for (i in 1..2) {
-		addChildDevice("Switch Child Device", "${device.deviceNetworkId}-ep${i}", null, [completedSetup: true, label: "${device.displayName} (CH${i})",
-																						 isComponent: true, componentName: "ep$i", componentLabel: "Channel $i"
-		])
-	}
-}
-
-private def logging(message, level) {
-	if (logLevel != "0") {
-		switch (logLevel) {
-			case "1":
-				if (level > 1) log.debug "$message"
-				break
-			case "99":
-				log.debug "$message"
-				break
-		}
-	}
-}

devicetypes/erocm123/switch-child-device.src/switch-child-device.groovy

@@ -1,49 +0,0 @@
-/**
- *  Switch Child Device
- *
- *  Copyright 2017 Eric Maycock
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-metadata {
-	definition (name: "Switch Child Device", namespace: "erocm123", author: "Eric Maycock") {
-		capability "Switch"
-		capability "Actuator"
-		capability "Sensor"
-		capability "Refresh"
-	}
-
-	tiles {
-		multiAttributeTile(name:"switch", type: "lighting", width: 3, height: 4, canChangeIcon: true){
-			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff", nextState:"turningOn"
-				attributeState "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#00A0DC", nextState:"turningOff"
-				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#00A0DC", nextState:"turningOff"
-				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
-			}
-		}
-		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-		}
-	}
-}
-
-void on() {
-	parent.childOn(device.deviceNetworkId)
-}
-
-void off() {
-	parent.childOff(device.deviceNetworkId)
-}
-
-void refresh() {
-	parent.childRefresh(device.deviceNetworkId)
-}

devicetypes/fibargroup/fibaro-door-window-sensor-zw5-with-temperature.src/fibaro-door-window-sensor-zw5-with-temperature.groovy

@@ -14,13 +14,13 @@
  *
  */
 metadata {
-	definition (name: "Fibaro Door/Window Sensor ZW5 with Temperature", namespace: "fibargroup", author: "Fibar Group S.A.", ocfDeviceType: "x.com.st.d.sensor.contact") {
+	definition (name: "Fibaro Door/Window Sensor ZW5 with Temperature", namespace: "fibargroup", author: "Fibar Group S.A.") {
 		capability "Battery"
 		capability "Contact Sensor"
 		capability "Sensor"
         capability "Configuration"
         capability "Tamper Alert"
-
+        
         capability "Temperature Measurement"
 
 		fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x85, 0x59, 0x22, 0x20, 0x80, 0x70, 0x56, 0x5A, 0x7A, 0x72, 0x8E, 0x71, 0x73, 0x98, 0x2B, 0x9C, 0x30, 0x31, 0x86", outClusters: ""
@@ -28,26 +28,26 @@ metadata {
 	}
 
 	simulator {
-
+		
 	}
-
+    
     tiles(scale: 2) {
     	multiAttributeTile(name:"FGK", type:"lighting", width:6, height:4) {//with generic type secondary control text is not displayed in Android app
         	tileAttribute("device.contact", key:"PRIMARY_CONTROL") {
-            	attributeState("open", icon:"st.contact.contact.open", backgroundColor:"#e86d13")
+            	attributeState("open", icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
-                attributeState("closed", icon:"st.contact.contact.closed", backgroundColor:"#00a0dc")
+                attributeState("closed", icon:"st.contact.contact.closed", backgroundColor:"#79b821")
             }
-
+            
             tileAttribute("device.tamper", key:"SECONDARY_CONTROL") {
-				attributeState("active", label:'tamper active', backgroundColor:"#00A0DC")
+				attributeState("active", label:'tamper active', backgroundColor:"#53a7c0")
-				attributeState("inactive", label:'tamper inactive', backgroundColor:"#CCCCCC")
+				attributeState("inactive", label:'tamper inactive', backgroundColor:"#ffffff")
-			}
+			}  
         }
-
+                
-        valueTile("battery", "device.battery", inactiveLabel: false, width: 2, height: 2, decoration: "flat") {
+        valueTile("battery", "device.battery", inactiveLabel: false, , width: 2, height: 2, decoration: "flat") {
             state "battery", label:'${currentValue}% battery', unit:""
         }
-
+        
         valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
 			state "temperature", label:'${currentValue}°',
 			backgroundColors:[
@@ -60,7 +60,7 @@ metadata {
 				[value: 96, color: "#bc2323"]
 			]
 		}
-
+        
         main "FGK"
         details(["FGK","battery", "temperature"])
     }
@@ -68,9 +68,9 @@ metadata {
 
 // parse events into attributes
 def parse(String description) {
-	log.debug "Parsing '${description}'"
+	log.debug "Parsing '${description}'"   
     def result = []
-
+    
     if (description.startsWith("Err 106")) {
 		if (state.sec) {
 			result = createEvent(descriptionText:description, displayed:false)
@@ -87,7 +87,7 @@ def parse(String description) {
 		return null
 	} else {
     	def cmd = zwave.parse(description, [0x31: 5, 0x56: 1, 0x71: 3, 0x72: 2, 0x80: 1, 0x84: 2, 0x85: 2, 0x86: 1, 0x98: 1])
-
+    
     	if (cmd) {
     		log.debug "Parsed '${cmd}'"
         	zwaveEvent(cmd)
@@ -125,13 +125,13 @@ def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cm
     //(parameter 20 was not changed before device's re-inclusion)
     def map = [:]
     if (cmd.notificationType == 6) {
-    	switch (cmd.event) {
+    	switch (cmd.event) {                
         	case 22:
             	map.name = "contact"
                 map.value = "open"
                 map.descriptionText = "${device.displayName}: is open"
             	break
-
+                
             case 23:
             	map.name = "contact"
                 map.value = "closed"
@@ -145,7 +145,7 @@ def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cm
                 map.value = "inactive"
                 map.descriptionText = "${device.displayName}: tamper alarm has been deactivated"
 				break
-
+                
         	case 3:
             	map.name = "tamper"
                 map.value = "active"
@@ -153,7 +153,7 @@ def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cm
             	break
         }
     }
-
+    
     createEvent(map)
 }
 
@@ -166,7 +166,7 @@ def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
 	createEvent(map)
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd) {
+def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd) {    
     def event = createEvent(descriptionText: "${device.displayName} woke up", displayed: false)
     def cmds = []
     cmds << encap(zwave.batteryV1.batteryGet())
@@ -177,32 +177,32 @@ def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd) {
     [event, response(cmds)]
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) { 
 	log.debug "manufacturerId:   ${cmd.manufacturerId}"
     log.debug "manufacturerName: ${cmd.manufacturerName}"
     log.debug "productId:        ${cmd.productId}"
     log.debug "productTypeId:    ${cmd.productTypeId}"
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.DeviceSpecificReport cmd) {
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.DeviceSpecificReport cmd) { 
 	log.debug "deviceIdData:                ${cmd.deviceIdData}"
     log.debug "deviceIdDataFormat:          ${cmd.deviceIdDataFormat}"
     log.debug "deviceIdDataLengthIndicator: ${cmd.deviceIdDataLengthIndicator}"
     log.debug "deviceIdType:                ${cmd.deviceIdType}"
-
+    
     if (cmd.deviceIdType == 1 && cmd.deviceIdDataFormat == 1) {//serial number in binary format
 		String serialNumber = "h'"
-
+        
         cmd.deviceIdData.each{ data ->
         	serialNumber += "${String.format("%02X", data)}"
         }
-
+        
         updateDataValue("serialNumber", serialNumber)
         log.debug "${device.displayName} - serial number: ${serialNumber}"
     }
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd) {
+def zwaveEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd) {	
     updateDataValue("version", "${cmd.applicationVersion}.${cmd.applicationSubVersion}")
     log.debug "applicationVersion:      ${cmd.applicationVersion}"
     log.debug "applicationSubVersion:   ${cmd.applicationSubVersion}"
@@ -221,7 +221,7 @@ def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv5.SensorMultilevelR
         map.name = "temperature"
         map.displayed = true
 	}
-
+	
     createEvent(map)
 }
 
@@ -231,9 +231,9 @@ def zwaveEvent(physicalgraph.zwave.commands.deviceresetlocallyv1.DeviceResetLoca
 
 def configure() {
 	log.debug "Executing 'configure'"
-
+    
     def cmds = []
-
+        
     cmds += zwave.wakeUpV2.wakeUpIntervalSet(seconds:21600, nodeid: zwaveHubNodeId)//FGK's default wake up interval
     cmds += zwave.manufacturerSpecificV2.manufacturerSpecificGet()
     cmds += zwave.manufacturerSpecificV2.deviceSpecificGet()
@@ -242,7 +242,7 @@ def configure() {
     cmds += zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 1, scale: 0)
     cmds += zwave.associationV2.associationSet(groupingIdentifier:1, nodeId: [zwaveHubNodeId])
     cmds += zwave.wakeUpV2.wakeUpNoMoreInformation()
-
+    
     encapSequence(cmds, 500)
 }
 
@@ -261,7 +261,7 @@ private encapSequence(commands, delay=200) {
 
 private encap(physicalgraph.zwave.Command cmd) {
     def secureClasses = [0x20, 0x2B, 0x30, 0x5A, 0x70, 0x71, 0x84, 0x85, 0x8E, 0x9C]
-
+    
     //todo: check if secure inclusion was successful
     //if not do not send security-encapsulated command
 	if (secureClasses.find{ it == cmd.commandClassId }) {
@@ -269,4 +269,4 @@ private encap(physicalgraph.zwave.Command cmd) {
     } else {
     	crc16(cmd)
     }
-}
+}

devicetypes/fibargroup/fibaro-door-window-sensor-zw5.src/.st-ignore

@@ -1,2 +0,0 @@
-.st-ignore
-README.md

devicetypes/fibargroup/fibaro-door-window-sensor-zw5.src/README.md

@@ -1,41 +0,0 @@
-# Fibaro Door Window Sensor ZW5
-
-Cloud Execution
-
-Works with: 
-
-* [Fibaro Door/Window Sensor ZW5](https://www.smartthings.com/works-with-smartthings/sensors/fibaro-doorwindow-sensor)
-
-## Table of contents
-
-* [Capabilities](#capabilities)
-* [Health](#device-health)
-* [Battery](#battery-specification)
-* [Troubleshooting](#troubleshooting)
-
-## Capabilities
-
-* **Battery** - defines device uses a battery
-* **Contact Sensor** - can detect contact (possible values: open,closed)
-* **Sensor** - detects sensor events
-* **Tamper Alert** - detects tampers
-* **Configuration** - _configure()_ command called when device is installed or device preferences updated
-* **Health Check** - indicates ability to get device health notifications
-
-## Device Health
-
-Fibaro Door/Window Sensor ZW5 is a Z-wave sleepy device and wakes up every 4 hours.
-Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*4*60 + 2)mins = 482 mins.
-
-* __482min__ checkInterval
-
-## Battery Specification
-
-One 1/2AA 3.6V battery is required.
-
-## Troubleshooting
-
-If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
-Pairing needs to be tried again by placing the device closer to the hub.
-Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
-* [Fibaro Door/Window Sensor ZW5 Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/204075194-Fibaro-Door-Window-Sensor)

devicetypes/fibargroup/fibaro-door-window-sensor-zw5.src/fibaro-door-window-sensor-zw5.groovy

@@ -14,38 +14,37 @@
  *
  */
 metadata {
-	definition (name: "Fibaro Door/Window Sensor ZW5", namespace: "fibargroup", author: "Fibar Group S.A.", ocfDeviceType: "x.com.st.d.sensor.contact") {
+	definition (name: "Fibaro Door/Window Sensor ZW5", namespace: "fibargroup", author: "Fibar Group S.A.") {
 		capability "Battery"
 		capability "Contact Sensor"
 		capability "Sensor"
         capability "Configuration"
         capability "Tamper Alert"
-		capability "Health Check"
 
         fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x85, 0x59, 0x22, 0x20, 0x80, 0x70, 0x56, 0x5A, 0x7A, 0x72, 0x8E, 0x71, 0x73, 0x98, 0x2B, 0x9C, 0x30, 0x86, 0x84", outClusters: ""
 	}
 
 	simulator {
-
+		
 	}
-
+        
     tiles(scale: 2) {
     	multiAttributeTile(name:"FGK", type:"lighting", width:6, height:4) {//with generic type secondary control text is not displayed in Android app
         	tileAttribute("device.contact", key:"PRIMARY_CONTROL") {
-            	attributeState("open", icon:"st.contact.contact.open", backgroundColor:"#e86d13")
+            	attributeState("open", icon:"st.contact.contact.open", backgroundColor:"#ffa81e")
-                attributeState("closed", icon:"st.contact.contact.closed", backgroundColor:"#00a0dc")
+                attributeState("closed", icon:"st.contact.contact.closed", backgroundColor:"#79b821")
             }
-
+            
             tileAttribute("device.tamper", key:"SECONDARY_CONTROL") {
-				attributeState("active", label:'tamper active', backgroundColor:"#00A0DC")
+				attributeState("active", label:'tamper active', backgroundColor:"#53a7c0")
-				attributeState("inactive", label:'tamper inactive', backgroundColor:"#CCCCCC")
+				attributeState("inactive", label:'tamper inactive', backgroundColor:"#ffffff")
-			}
+			}  
         }
-
+                
-        valueTile("battery", "device.battery", inactiveLabel: false, width: 2, height: 2, decoration: "flat") {
+        valueTile("battery", "device.battery", inactiveLabel: false, , width: 2, height: 2, decoration: "flat") {
             state "battery", label:'${currentValue}% battery', unit:""
         }
-
+        
         main "FGK"
         details(["FGK","battery"])
     }
@@ -53,9 +52,9 @@ metadata {
 
 // parse events into attributes
 def parse(String description) {
-	log.debug "Parsing '${description}'"
+	log.debug "Parsing '${description}'"   
     def result = []
-
+    
     if (description.startsWith("Err 106")) {
 		if (state.sec) {
 			result = createEvent(descriptionText:description, displayed:false)
@@ -72,7 +71,7 @@ def parse(String description) {
 		return null
 	} else {
     	def cmd = zwave.parse(description, [0x56: 1, 0x71: 3, 0x72: 2, 0x80: 1, 0x84: 2, 0x85: 2, 0x86: 1, 0x98: 1])
-
+    
     	if (cmd) {
     		log.debug "Parsed '${cmd}'"
         	zwaveEvent(cmd)
@@ -110,13 +109,13 @@ def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cm
     //(parameter 20 was not changed before device's re-inclusion)
     def map = [:]
     if (cmd.notificationType == 6) {
-    	switch (cmd.event) {
+    	switch (cmd.event) {                
         	case 22:
             	map.name = "contact"
                 map.value = "open"
                 map.descriptionText = "${device.displayName}: is open"
             	break
-
+                
             case 23:
             	map.name = "contact"
                 map.value = "closed"
@@ -130,7 +129,7 @@ def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cm
                 map.value = "inactive"
                 map.descriptionText = "${device.displayName}: tamper alarm has been deactivated"
 				break
-
+                
         	case 3:
             	map.name = "tamper"
                 map.value = "active"
@@ -138,7 +137,7 @@ def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cm
             	break
         }
     }
-
+    
     createEvent(map)
 }
 
@@ -151,7 +150,7 @@ def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
 	createEvent(map)
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd) {
+def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd) {    
     def event = createEvent(descriptionText: "${device.displayName} woke up", displayed: false)
     def cmds = []
     cmds << encap(zwave.batteryV1.batteryGet())
@@ -160,32 +159,32 @@ def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd) {
     [event, response(cmds)]
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) { 
 	log.debug "manufacturerId:   ${cmd.manufacturerId}"
     log.debug "manufacturerName: ${cmd.manufacturerName}"
     log.debug "productId:        ${cmd.productId}"
     log.debug "productTypeId:    ${cmd.productTypeId}"
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.DeviceSpecificReport cmd) {
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.DeviceSpecificReport cmd) { 
 	log.debug "deviceIdData:                ${cmd.deviceIdData}"
     log.debug "deviceIdDataFormat:          ${cmd.deviceIdDataFormat}"
     log.debug "deviceIdDataLengthIndicator: ${cmd.deviceIdDataLengthIndicator}"
     log.debug "deviceIdType:                ${cmd.deviceIdType}"
-
+    
     if (cmd.deviceIdType == 1 && cmd.deviceIdDataFormat == 1) {//serial number in binary format
 		String serialNumber = "h'"
-
+        
         cmd.deviceIdData.each{ data ->
         	serialNumber += "${String.format("%02X", data)}"
         }
-
+        
         updateDataValue("serialNumber", serialNumber)
         log.debug "${device.displayName} - serial number: ${serialNumber}"
     }
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd) {
+def zwaveEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd) {	
     updateDataValue("version", "${cmd.applicationVersion}.${cmd.applicationSubVersion}")
     log.debug "applicationVersion:      ${cmd.applicationVersion}"
     log.debug "applicationSubVersion:   ${cmd.applicationSubVersion}"
@@ -200,11 +199,9 @@ def zwaveEvent(physicalgraph.zwave.commands.deviceresetlocallyv1.DeviceResetLoca
 
 def configure() {
 	log.debug "Executing 'configure'"
-	// Device wakes up every 4 hours, this interval allows us to miss one wakeup notification before marking offline
+    
-	sendEvent(name: "checkInterval", value: 8 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-
     def cmds = []
-
+    
     cmds += zwave.wakeUpV2.wakeUpIntervalSet(seconds:21600, nodeid: zwaveHubNodeId)//FGK's default wake up interval
     cmds += zwave.manufacturerSpecificV2.manufacturerSpecificGet()
     cmds += zwave.manufacturerSpecificV2.deviceSpecificGet()
@@ -212,7 +209,7 @@ def configure() {
     cmds += zwave.batteryV1.batteryGet()
     cmds += zwave.associationV2.associationSet(groupingIdentifier:1, nodeId: [zwaveHubNodeId])
     cmds += zwave.wakeUpV2.wakeUpNoMoreInformation()
-
+    
     encapSequence(cmds, 500)
 }
 
@@ -231,7 +228,7 @@ private encapSequence(commands, delay=200) {
 
 private encap(physicalgraph.zwave.Command cmd) {
     def secureClasses = [0x20, 0x2B, 0x30, 0x5A, 0x70, 0x71, 0x84, 0x85, 0x8E, 0x9C]
-
+    
     //todo: check if secure inclusion was successful
     //if not do not send security-encapsulated command
 	if (secureClasses.find{ it == cmd.commandClassId }) {
@@ -239,4 +236,4 @@ private encap(physicalgraph.zwave.Command cmd) {
     } else {
     	crc16(cmd)
     }
-}
+}

devicetypes/fibargroup/fibaro-flood-sensor-zw5.src/fibaro-flood-sensor-zw5.groovy

@@ -14,37 +14,35 @@
  *
  */
 metadata {
-	definition (name: "Fibaro Flood Sensor ZW5", namespace: "fibargroup", author: "Fibar Group S.A.", ocfDeviceType: "x.com.st.d.sensor.moisture") {
+	definition (name: "Fibaro Flood Sensor ZW5", namespace: "fibargroup", author: "Fibar Group S.A.") {
 		capability "Battery"
 		capability "Configuration"
 		capability "Sensor"
 		capability "Tamper Alert"
 		capability "Temperature Measurement"
 		capability "Water Sensor"
-		capability "Health Check"
+        
-
+        fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x22, 0x85, 0x59, 0x20, 0x80, 0x70, 0x56, 0x5A, 0x7A, 0x72, 0x8E, 0x71, 0x73, 0x98, 0x9C, 0x31, 0x86", outClusters: ""
-		fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x22, 0x85, 0x59, 0x20, 0x80, 0x70, 0x56, 0x5A, 0x7A, 0x72, 0x8E, 0x71, 0x73, 0x98, 0x9C, 0x31, 0x86", outClusters: ""
-		fingerprint mfr:"010F", prod:"0B01", model:"2002"
-		fingerprint mfr:"010F", prod:"0B01", model:"1002"
 	}
 
 	simulator {
+    
 	}
-
+    
-	tiles(scale: 2) {
+    tiles(scale: 2) {
-		multiAttributeTile(name:"FGFS", type:"lighting", width:6, height:4) {//with generic type secondary control text is not displayed in Android app
+    	multiAttributeTile(name:"FGFS", type:"lighting", width:6, height:4) {//with generic type secondary control text is not displayed in Android app
-			tileAttribute("device.water", key:"PRIMARY_CONTROL") {
+        	tileAttribute("device.water", key:"PRIMARY_CONTROL") {
-				attributeState("dry", icon:"st.alarm.water.dry", backgroundColor:"#ffffff")
+            	attributeState("dry", icon:"st.alarm.water.dry", backgroundColor:"#79b821")
-				attributeState("wet", icon:"st.alarm.water.wet", backgroundColor:"#00a0dc")
+            	attributeState("wet", icon:"st.alarm.water.wet", backgroundColor:"#ffa81e")
-			}
+            }
-
+            
-			tileAttribute("device.tamper", key:"SECONDARY_CONTROL") {
+            tileAttribute("device.tamper", key:"SECONDARY_CONTROL") {
-				attributeState("active", label:'tamper active', backgroundColor:"#cccccc")
+				attributeState("active", label:'tamper active', backgroundColor:"#53a7c0")
-				attributeState("inactive", label:'tamper inactive', backgroundColor:"#00A0DC")
+				attributeState("inactive", label:'tamper inactive', backgroundColor:"#ffffff")
-			}
+			}       
-		}
+        }
-
+        
-		valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
+        valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
 			state "temperature", label:'${currentValue}°',
 			backgroundColors:[
 				[value: 31, color: "#153591"],
@@ -56,22 +54,22 @@ metadata {
 				[value: 96, color: "#bc2323"]
 			]
 		}
-
+       	        
-		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+        valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "battery", label:'${currentValue}% battery', unit:""
+        	state "battery", label:'${currentValue}% battery', unit:""
-		}
+        }
-
+        
-		main "FGFS"
+        main "FGFS"
-		details(["FGFS","battery", "temperature"])
+        details(["FGFS","battery", "temperature"])
-	}
+    }
 }
 
 // parse events into attributes
 def parse(String description) {
 	log.debug "Parsing '${description}'"
 	def result = []
-
+    
-	if (description.startsWith("Err 106")) {
+    if (description.startsWith("Err 106")) {
 		if (state.sec) {
 			result = createEvent(descriptionText:description, displayed:false)
 		} else {
@@ -86,13 +84,13 @@ def parse(String description) {
 	} else if (description == "updated") {
 		return null
 	} else {
-		def cmd = zwave.parse(description, [0x31: 5, 0x56: 1, 0x71: 3, 0x72:2, 0x80: 1, 0x84: 2, 0x85: 2, 0x86: 1, 0x98: 1])
+        def cmd = zwave.parse(description, [0x31: 5, 0x56: 1, 0x71: 3, 0x72:2, 0x80: 1, 0x84: 2, 0x85: 2, 0x86: 1, 0x98: 1])
 
-		if (cmd) {
+        if (cmd) {
-			log.debug "Parsed '${cmd}'"
+            log.debug "Parsed '${cmd}'"
-			zwaveEvent(cmd)
+            zwaveEvent(cmd)
-		}
+        }
-	}
+    }
 }
 
 //security
@@ -109,7 +107,7 @@ def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulat
 //crc16
 def zwaveEvent(physicalgraph.zwave.commands.crc16encapv1.Crc16Encap cmd)
 {
-	def versions = [0x31: 5, 0x72: 2, 0x80: 1]
+    def versions = [0x31: 5, 0x72: 2, 0x80: 1]
 	def version = versions[cmd.commandClass as Integer]
 	def ccObj = version ? zwave.commandClass(cmd.commandClass, version) : zwave.commandClass(cmd.commandClass)
 	def encapsulatedCommand = ccObj?.command(cmd.command)?.parse(cmd.data)
@@ -123,124 +121,105 @@ def zwaveEvent(physicalgraph.zwave.commands.crc16encapv1.Crc16Encap cmd)
 def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd)
 {
 	def event = createEvent(descriptionText: "${device.displayName} woke up", displayed: false)
-	def cmds = []
+    def cmds = []
-	// cmds << encap(zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 1, scale: 0))
+    cmds << encap(zwave.batteryV1.batteryGet())
-	// cmds << "delay 500"
+    cmds << "delay 500"
-	cmds << encap(zwave.batteryV1.batteryGet())
+    cmds << encap(zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 1, scale: 0))    
-	[event, response(cmds)]
+    cmds << "delay 1200"
+    cmds << encap(zwave.wakeUpV1.wakeUpNoMoreInformation())
+    [event, response(cmds)]
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) { 
 	log.debug "manufacturerId:   ${cmd.manufacturerId}"
-	log.debug "manufacturerName: ${cmd.manufacturerName}"
+    log.debug "manufacturerName: ${cmd.manufacturerName}"
-	log.debug "productId:        ${cmd.productId}"
+    log.debug "productId:        ${cmd.productId}"
-	log.debug "productTypeId:    ${cmd.productTypeId}"
+    log.debug "productTypeId:    ${cmd.productTypeId}"
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.DeviceSpecificReport cmd) {
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.DeviceSpecificReport cmd) { 
 	log.debug "deviceIdData:                ${cmd.deviceIdData}"
-	log.debug "deviceIdDataFormat:          ${cmd.deviceIdDataFormat}"
+    log.debug "deviceIdDataFormat:          ${cmd.deviceIdDataFormat}"
-	log.debug "deviceIdDataLengthIndicator: ${cmd.deviceIdDataLengthIndicator}"
+    log.debug "deviceIdDataLengthIndicator: ${cmd.deviceIdDataLengthIndicator}"
-	log.debug "deviceIdType:                ${cmd.deviceIdType}"
+    log.debug "deviceIdType:                ${cmd.deviceIdType}"
-
+    
-	if (cmd.deviceIdType == 1 && cmd.deviceIdDataFormat == 1) { //serial number in binary format
+    if (cmd.deviceIdType == 1 && cmd.deviceIdDataFormat == 1) {//serial number in binary format
 		String serialNumber = "h'"
-
+        
-		cmd.deviceIdData.each{ data ->
+        cmd.deviceIdData.each{ data ->
-			serialNumber += "${String.format("%02X", data)}"
+        	serialNumber += "${String.format("%02X", data)}"
-		}
+        }
-
+        
-		updateDataValue("serialNumber", serialNumber)
+        updateDataValue("serialNumber", serialNumber)
-		log.debug "${device.displayName} - serial number: ${serialNumber}"
+        log.debug "${device.displayName} - serial number: ${serialNumber}"
-	}
+    }
-
-	def response_cmds = []
-	if (!device.currentState("temperature")) {
-		response_cmds << encap(zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 1, scale: 0))
-	}
-	if (!getDataValue("version") && !zwaveInfo.ver) {
-		log.debug "Requesting Version Report"
-		response_cmds << "delay 500"
-		response_cmds << encap(zwave.versionV1.versionGet())
-	}
-	response_cmds << "delay 1000"
-	response_cmds << encap(zwave.wakeUpV2.wakeUpNoMoreInformation())
-	[[:], response(response_cmds)]
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd) {
+def zwaveEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd) {	
-	updateDataValue("version", "${cmd.applicationVersion}.${cmd.applicationSubVersion}")
+    updateDataValue("version", "${cmd.applicationVersion}.${cmd.applicationSubVersion}")
-	log.debug "applicationVersion:      ${cmd.applicationVersion}"
+    log.debug "applicationVersion:      ${cmd.applicationVersion}"
-	log.debug "applicationSubVersion:   ${cmd.applicationSubVersion}"
+    log.debug "applicationSubVersion:   ${cmd.applicationSubVersion}"
-	log.debug "zWaveLibraryType:        ${cmd.zWaveLibraryType}"
+    log.debug "zWaveLibraryType:        ${cmd.zWaveLibraryType}"
-	log.debug "zWaveProtocolVersion:    ${cmd.zWaveProtocolVersion}"
+    log.debug "zWaveProtocolVersion:    ${cmd.zWaveProtocolVersion}"
-	log.debug "zWaveProtocolSubVersion: ${cmd.zWaveProtocolSubVersion}"
+    log.debug "zWaveProtocolSubVersion: ${cmd.zWaveProtocolSubVersion}"
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
-	def result = []
 	def map = [:]
 	map.name = "battery"
 	map.value = cmd.batteryLevel == 255 ? 1 : cmd.batteryLevel.toString()
 	map.unit = "%"
-
+	map.displayed = true
-	result << createEvent(map)
+	createEvent(map)
-
-	if (!getDataValue("serialNumber")) {
-		result << response(encap(zwave.manufacturerSpecificV2.deviceSpecificGet()))
-	} else {
-		result << response(encap(zwave.wakeUpV2.wakeUpNoMoreInformation()))
-	}
-	result
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cmd) {
 	def map = [:]
-	if (cmd.notificationType == 5) {
+    if (cmd.notificationType == 5) {
-		switch (cmd.event) {
+    	switch (cmd.event) {                
-			case 2:
+        	case 2:
-				map.name = "water"
+            	map.name = "water"
-				map.value = "wet"
+                map.value = "wet"
-				map.descriptionText = "${device.displayName} is ${map.value}"
+                map.descriptionText = "${device.displayName} is ${map.value}"
+            	break
+                
+            case 0:
+            	map.name = "water"
+                map.value = "dry"
+                map.descriptionText = "${device.displayName} is ${map.value}"
+            	break
+        }
+    } else if (cmd.notificationType == 7) {
+    	switch (cmd.event) {
+        	case 0:
+            	map.name = "tamper"
+                map.value = "inactive"
+                map.descriptionText = "${device.displayName}: tamper alarm has been deactivated"
 				break
-
+                
-			case 0:
+        	case 3:
-				map.name = "water"
+            	map.name = "tamper"
-				map.value = "dry"
+                map.value = "active"
-				map.descriptionText = "${device.displayName} is ${map.value}"
+                map.descriptionText = "${device.displayName}: tamper alarm activated"
-				break
+            	break
-		}
+        }
-	} else if (cmd.notificationType == 7) {
+    }
-		switch (cmd.event) {
+    
-			case 0:
+    createEvent(map)
-				map.name = "tamper"
-				map.value = "inactive"
-				map.descriptionText = "${device.displayName}: tamper alarm has been deactivated"
-				break
-
-			case 3:
-				map.name = "tamper"
-				map.value = "active"
-				map.descriptionText = "${device.displayName}: tamper alarm activated"
-				break
-		}
-	}
-
-	createEvent(map)
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv5.SensorMultilevelReport cmd) {
 	def map = [:]
 	if (cmd.sensorType == 1) {
-		// temperature
+        // temperature
-		def cmdScale = cmd.scale == 1 ? "F" : "C"
+        def cmdScale = cmd.scale == 1 ? "F" : "C"
-		map.value = convertTemperatureIfNeeded(cmd.scaledSensorValue, cmdScale, cmd.precision)
+        map.value = convertTemperatureIfNeeded(cmd.scaledSensorValue, cmdScale, cmd.precision)
-		map.unit = getTemperatureScale()
+        map.unit = getTemperatureScale()
-		map.name = "temperature"
+        map.name = "temperature"
-		map.displayed = true
+        map.displayed = true
 	}
-
+	
-	createEvent(map)
+    createEvent(map)
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.deviceresetlocallyv1.DeviceResetLocallyNotification cmd) {
@@ -249,18 +228,19 @@ def zwaveEvent(physicalgraph.zwave.commands.deviceresetlocallyv1.DeviceResetLoca
 
 def configure() {
 	log.debug "Executing 'configure'"
-	// Device wakes up every 4 hours, this interval of 8h 2m allows us to miss one wakeup notification before marking offline
+	
-	sendEvent(name: "checkInterval", value: 8 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+    def cmds = []
+    
+	cmds += zwave.wakeUpV2.wakeUpIntervalSet(seconds:21600, nodeid: zwaveHubNodeId)//FGFS' default wake up interval
+    cmds += zwave.manufacturerSpecificV2.manufacturerSpecificGet()
+    cmds += zwave.manufacturerSpecificV2.deviceSpecificGet()
+    cmds += zwave.versionV1.versionGet()
+    cmds += zwave.batteryV1.batteryGet()
+    cmds += zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 1, scale: 0)
+    cmds += zwave.associationV2.associationSet(groupingIdentifier:1, nodeId: [zwaveHubNodeId])
+    cmds += zwave.wakeUpV2.wakeUpNoMoreInformation()
 
-	// default initial state
+	encapSequence(cmds, 500)
-	sendEvent(name: "water", value: "dry")
-
-	def cmds = []
-
-	cmds << zwave.associationV2.associationSet(groupingIdentifier:1, nodeId: [zwaveHubNodeId])
-	cmds << zwave.batteryV1.batteryGet()  // other queries sent as response to BatteryReport
-
-	encapSequence(cmds, 200)
 }
 
 private secure(physicalgraph.zwave.Command cmd) {
@@ -269,7 +249,7 @@ private secure(physicalgraph.zwave.Command cmd) {
 
 private crc16(physicalgraph.zwave.Command cmd) {
 	//zwave.crc16EncapV1.crc16Encap().encapsulate(cmd).format()
-	"5601${cmd.format()}0000"
+    "5601${cmd.format()}0000"
 }
 
 private encapSequence(commands, delay=200) {
@@ -277,10 +257,13 @@ private encapSequence(commands, delay=200) {
 }
 
 private encap(physicalgraph.zwave.Command cmd) {
-	if (zwaveInfo.zw && !zwaveInfo.zw.contains("s")) {
+	def secureClasses = [0x20, 0x5A, 0x70, 0x71, 0x84, 0x85, 0x8E, 0x9C]
-		// Secure inclusion failed
+
-		crc16(cmd)
+	//todo: check if secure inclusion was successful
-	} else {
+    //if not do not send security-encapsulated command
-		secure(cmd)
+	if (secureClasses.find{ it == cmd.commandClassId }) {
-	}
+    	secure(cmd)
-}
+    } else {
+    	crc16(cmd)
+    }
+}

devicetypes/fibargroup/fibaro-motion-sensor-zw5.src/fibaro-motion-sensor-zw5.groovy

@@ -14,7 +14,7 @@
  *
  */
 metadata {
-	definition (name: "Fibaro Motion Sensor ZW5", namespace: "fibargroup", author: "Fibar Group S.A.", ocfDeviceType: "x.com.st.d.sensor.motion") {
+	definition (name: "Fibaro Motion Sensor ZW5", namespace: "fibargroup", author: "Fibar Group S.A.") {
 		capability "Battery"
 		capability "Configuration"
 		capability "Illuminance Measurement"
@@ -22,28 +22,27 @@ metadata {
 		capability "Sensor"
 		capability "Tamper Alert"
 		capability "Temperature Measurement"
-		capability "Health Check"
+        
-
         fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x20, 0x86, 0x72, 0x5A, 0x59, 0x85, 0x73, 0x84, 0x80, 0x71, 0x56, 0x70, 0x31, 0x8E, 0x22, 0x30, 0x9C, 0x98, 0x7A", outClusters: ""
 	}
-
+    
 	simulator {
-
+		
     }
-
+    
     tiles(scale: 2) {
     	multiAttributeTile(name:"FGMS", type:"lighting", width:6, height:4) {//with generic type secondary control text is not displayed in Android app
         	tileAttribute("device.motion", key:"PRIMARY_CONTROL") {
-            	attributeState("inactive", label:"no motion", icon:"st.motion.motion.inactive", backgroundColor:"#cccccc")
+            	attributeState("inactive", label:"no motion", icon:"st.motion.motion.inactive", backgroundColor:"#79b821")
-            	attributeState("active", label:"motion", icon:"st.motion.motion.active", backgroundColor:"#00A0DC")
+            	attributeState("active", label:"motion", icon:"st.motion.motion.active", backgroundColor:"#ffa81e")   
             }
-
+            
             tileAttribute("device.tamper", key:"SECONDARY_CONTROL") {
-				attributeState("active", label:'tamper active', backgroundColor:"#00a0dc")
+				attributeState("active", label:'tamper active', backgroundColor:"#53a7c0")
-				attributeState("inactive", label:'tamper inactive', backgroundColor:"#cccccc")
+				attributeState("inactive", label:'tamper inactive', backgroundColor:"#ffffff")
-			}
+			}  
         }
-
+        
         valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
 			state "temperature", label:'${currentValue}°',
 			backgroundColors:[
@@ -56,15 +55,15 @@ metadata {
 				[value: 96, color: "#bc2323"]
 			]
 		}
-
+        
         valueTile("illuminance", "device.illuminance", inactiveLabel: false, width: 2, height: 2) {
 			state "luminosity", label:'${currentValue} ${unit}', unit:"lux"
 		}
-
+        
         valueTile("battery", "device.battery", inactiveLabel: false, width: 2, height: 2, decoration: "flat") {
             state "battery", label:'${currentValue}% battery', unit:""
         }
-
+        
         main "FGMS"
         details(["FGMS","battery","temperature","illuminance"])
     }
@@ -72,9 +71,9 @@ metadata {
 
 // parse events into attributes
 def parse(String description) {
-	log.debug "Parsing '${description}'"
+	log.debug "Parsing '${description}'"        
     def result = []
-
+    
     if (description.startsWith("Err 106")) {
 		if (state.sec) {
 			result = createEvent(descriptionText:description, displayed:false)
@@ -91,7 +90,7 @@ def parse(String description) {
 		return null
 	} else {
     	def cmd = zwave.parse(description, [0x31: 5, 0x56: 1, 0x71: 3, 0x72: 2, 0x80: 1, 0x84: 2, 0x85: 2, 0x86: 1, 0x98: 1])
-
+    
     	if (cmd) {
     		log.debug "Parsed '${cmd}'"
         	zwaveEvent(cmd)
@@ -159,13 +158,13 @@ def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cm
                     map.descriptionText = "${device.displayName}: motion has stopped"
                 }
         		break
-
+                
         	case 3:
             	map.name = "tamper"
                 map.value = "active"
                 map.descriptionText = "${device.displayName}: tamper alarm activated"
             	break
-
+                
             case 8:
                 map.name = "motion"
                 map.value = "active"
@@ -173,7 +172,7 @@ def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cm
                 break
         }
     }
-
+    
     createEvent(map)
 }
 
@@ -194,39 +193,39 @@ def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd)
     cmds << "delay 500"
     cmds << encap(zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 1, scale: 0))
     cmds << "delay 500"
-    cmds << encap(zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 3, scale: 1))
+    cmds << encap(zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 3, scale: 1))     
     cmds << "delay 1200"
     cmds << encap(zwave.wakeUpV1.wakeUpNoMoreInformation())
     [event, response(cmds)]
-
+    
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) { 
 	log.debug "manufacturerId:   ${cmd.manufacturerId}"
     log.debug "manufacturerName: ${cmd.manufacturerName}"
     log.debug "productId:        ${cmd.productId}"
     log.debug "productTypeId:    ${cmd.productTypeId}"
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.DeviceSpecificReport cmd) {
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.DeviceSpecificReport cmd) { 
 	log.debug "deviceIdData:                ${cmd.deviceIdData}"
     log.debug "deviceIdDataFormat:          ${cmd.deviceIdDataFormat}"
     log.debug "deviceIdDataLengthIndicator: ${cmd.deviceIdDataLengthIndicator}"
     log.debug "deviceIdType:                ${cmd.deviceIdType}"
-
+    
     if (cmd.deviceIdType == 1 && cmd.deviceIdDataFormat == 1) {//serial number in binary format
 		String serialNumber = "h'"
-
+        
         cmd.deviceIdData.each{ data ->
         	serialNumber += "${String.format("%02X", data)}"
         }
-
+        
         updateDataValue("serialNumber", serialNumber)
         log.debug "${device.displayName} - serial number: ${serialNumber}"
     }
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd) {
+def zwaveEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd) {	
     updateDataValue("version", "${cmd.applicationVersion}.${cmd.applicationSubVersion}")
     log.debug "applicationVersion:      ${cmd.applicationVersion}"
     log.debug "applicationSubVersion:   ${cmd.applicationSubVersion}"
@@ -241,11 +240,9 @@ def zwaveEvent(physicalgraph.zwave.commands.deviceresetlocallyv1.DeviceResetLoca
 
 def configure() {
 	log.debug "Executing 'configure'"
-	// Device-Watch simply pings if no device events received for 8 hrs & 2 minutes
+    
-	sendEvent(name: "checkInterval", value: 8 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-
     def cmds = []
-
+    
     cmds += zwave.wakeUpV2.wakeUpIntervalSet(seconds: 7200, nodeid: zwaveHubNodeId)//FGMS' default wake up interval
     cmds += zwave.manufacturerSpecificV2.manufacturerSpecificGet()
     cmds += zwave.manufacturerSpecificV2.deviceSpecificGet()
@@ -255,7 +252,7 @@ def configure() {
     cmds += zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 1, scale: 0)
     cmds += zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 3, scale: 1)
     cmds += zwave.wakeUpV2.wakeUpNoMoreInformation()
-
+    
     encapSequence(cmds, 500)
 }
 

devicetypes/johnrucker/coopboss-h3vx.src/coopboss-h3vx.groovy

@@ -95,12 +95,12 @@ metadata {
 		multiAttributeTile(name:"doorCtrl", type:"generic", width:6, height:4) {tileAttribute("device.doorState", key: "PRIMARY_CONTROL") 
         	{  
 			attributeState "unknown", label: '${name}', action:"openDoor", icon: "st.Outdoor.outdoor20", nextState:"Sent"          
-			attributeState "open", label: '${name}', action:"closeDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#00A0DC" , nextState:"Sent"
+			attributeState "open", label: '${name}', action:"closeDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#0000ff" , nextState:"Sent" 
-			attributeState "opening", label: '${name}', action:"closeDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#00A0DC"
+			attributeState "opening", label: '${name}', action:"closeDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#ffa81e"            
-			attributeState "closed", label: '${name}', action:"openDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#ffffff", nextState:"Sent"
+			attributeState "closed", label: '${name}', action:"openDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#79b821", nextState:"Sent" 
-			attributeState "closing", label: '${name}', action:"openDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#ffffff"
+			attributeState "closing", label: '${name}', action:"openDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#ffa81e" 
-			attributeState "jammed", label: '${name}', action:"closeDoorHiI", icon: "st.Outdoor.outdoor20", backgroundColor: "#ff0000", nextState:"Sent"
+			attributeState "jammed", label: '${name}', action:"closeDoorHiI", icon: "st.Outdoor.outdoor20", backgroundColor: "#ff0000", nextState:"Sent" 
-			attributeState "forced close", label: 'forced\rclose', action:"openDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#ff8000", nextState:"Sent"
+			attributeState "forced close", label: 'forced\rclose', action:"openDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#ff8000", nextState:"Sent"   
 			attributeState "fault", label: 'FAULT', action:"openDoor", icon: "st.Outdoor.outdoor20", backgroundColor: "#ff0000", nextState:"Sent"              
 			attributeState "Sent", label: 'wait', icon: "st.motion.motion.active", backgroundColor: "#ffa81e"              
 			} 
@@ -112,10 +112,10 @@ metadata {
 		multiAttributeTile(name:"dtlsDoorCtrl", type:"generic", width:6, height:4) {tileAttribute("device.doorState", key: "PRIMARY_CONTROL") 
         	{
       		attributeState "unknown", label: '${name}', action:"openDoor", icon: "st.secondary.tools", nextState:"Sent"
-      		attributeState "open", label: '${name}', action:"closeDoor", icon: "st.doors.garage.garage-open", backgroundColor: "#00A0DC", nextState:"Sent"
+      		attributeState "open", label: '${name}', action:"closeDoor", icon: "st.doors.garage.garage-open", backgroundColor: "#0000ff", nextState:"Sent"
-            attributeState "opening", label: '${name}', action:"closeDoor", icon: "st.doors.garage.garage-opening", backgroundColor: "#00A0DC"
+            attributeState "opening", label: '${name}', action:"closeDoor", icon: "st.doors.garage.garage-opening", backgroundColor: "#ffa81e" 
-            attributeState "closed", label: '${name}', action:"openDoor", icon: "st.doors.garage.garage-closed", backgroundColor: "#ffffff", nextState:"Sent"
+            attributeState "closed", label: '${name}', action:"openDoor", icon: "st.doors.garage.garage-closed", backgroundColor: "#79b821", nextState:"Sent"
-            attributeState "closing", label: '${name}', action:"openDoor", icon: "st.doors.garage.garage-closing", backgroundColor: "#ffffff"
+            attributeState "closing", label: '${name}', action:"openDoor", icon: "st.doors.garage.garage-closing", backgroundColor: "#ffa81e" 
             attributeState "jammed", label: '${name}', action:"closeDoorHiI", icon: "st.doors.garage.garage-open", backgroundColor: "#ff0000", nextState:"Sent"
             attributeState "forced close", label: "forced", action:"openDoor", icon: "st.doors.garage.garage-closed", backgroundColor: "#ff8000", nextState:"Sent"
             attributeState "fault", label: 'FAULT', action:"openDoor", icon: "st.secondary.tools", backgroundColor: "#ff0000", nextState:"Sent"  
@@ -135,13 +135,13 @@ metadata {
     	}        
         
 		standardTile("autoClose", "device.autoCloseEnable", width: 2, height: 2){
-			state "on", label: 'Auto', action:"autoCloseOff", icon: "st.doors.garage.garage-closing", backgroundColor: "#00A0DC", nextState:"Sent"
+			state "on", label: 'Auto', action:"autoCloseOff", icon: "st.doors.garage.garage-closing", backgroundColor: "#79b821", nextState:"Sent"
 			state "off", label: 'Auto', action:"autoCloseOn", icon: "st.doors.garage.garage-closing", nextState:"Sent"
 			state "Sent", label: 'wait', icon: "st.motion.motion.active", backgroundColor: "#ffa81e"              
 		}    
         
 		standardTile("autoOpen", "device.autoOpenEnable", width: 2, height: 2){
-			state "on", label: 'Auto', action:"autoOpenOff", icon: "st.doors.garage.garage-opening", backgroundColor: "#00A0DC", nextState:"Sent"
+			state "on", label: 'Auto', action:"autoOpenOff", icon: "st.doors.garage.garage-opening", backgroundColor: "#79b821", nextState:"Sent"
 			state "off", label: 'Auto', action:"autoOpenOn", icon: "st.doors.garage.garage-opening", nextState:"Sent"
 			state "Sent", label: 'wait', icon: "st.motion.motion.active", backgroundColor: "#ffa81e"              
 		}            
@@ -189,13 +189,13 @@ metadata {
         
 		standardTile("aux1", "device.Aux1", width: 2, height: 2, canChangeIcon: true) {
 			state "off", label:'Aux 1', action:"Aux1On", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"Sent"        
-			state "on", label:'Aux 1', action:"Aux1Off", icon:"st.switches.switch.on", backgroundColor:"#00A0DC", nextState:"Sent"
+			state "on", label:'Aux 1', action:"Aux1Off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"Sent"
 			state "Sent", label: 'wait', icon: "st.motion.motion.active", backgroundColor: "#ffa81e"            
 		}        
         
 		standardTile("aux2", "device.Aux2", width: 2, height: 2, canChangeIcon: true) {
 			state "off", label:'Aux 2', action:"Aux2On", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"Sent"        
-			state "on", label:'Aux 2', action:"Aux2Off", icon:"st.switches.switch.on", backgroundColor:"#00A0DC", nextState:"Sent"
+			state "on", label:'Aux 2', action:"Aux2Off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"Sent"
 			state "Sent", label: 'wait', icon: "st.motion.motion.active", backgroundColor: "#ffa81e"   
 		}            
         

devicetypes/juano2310/jawbone-user.src/jawbone-user.groovy

@@ -24,7 +24,7 @@ metadata {
     tiles {
         standardTile("sleeping", "device.sleeping", width: 1, height: 1, canChangeIcon: false, canChangeBackground: false) {
             state("sleeping", label: "Sleeping", icon:"st.Bedroom.bedroom12", backgroundColor:"#ffffff")
-            state("not sleeping", label: "Awake", icon:"st.Health & Wellness.health12", backgroundColor:"#00A0DC")
+            state("not sleeping", label: "Awake", icon:"st.Health & Wellness.health12", backgroundColor:"#79b821")
         }
         standardTile("steps", "device.steps", width: 2, height: 2, canChangeIcon: false, canChangeBackground: false) {
             state("steps", label: '${currentValue} Steps', icon:"st.Health & Wellness.health11", backgroundColor:"#ffffff")                     

devicetypes/keen-home/keen-home-smart-vent.src/.st-ignore

@@ -1,2 +0,0 @@
-.st-ignore
-README.md

devicetypes/keen-home/keen-home-smart-vent.src/README.md

@@ -1,39 +0,0 @@
-# Keen Home Smart Vent
-
-Cloud Execution
-
-Works with: 
-
-* [Keen Home Smart Vent](https://www.smartthings.com/works-with-smartthings/keen-home/keen-home-smart-vent)
-
-## Table of contents
-
-* [Capabilities](#capabilities)
-* [Health](#device-health)
-* [Troubleshooting](#Troubleshooting)
-
-## Capabilities
-
-* **Switch** - can detect state (possible values: on/off)
-* **Switch Level** - represents current light level, usually 0-100 in percent
-* **Sensor** - detects sensor events
-* **Temperature Measurement** - represents capability to measure temperature
-* **Configuration** - _configure()_ command called when device is installed or device preferences updated
-* **Battery** - defines device uses a battery
-* **Refresh** - _refresh()_ command for status updates
-* **Health Check** - indicates ability to get device health notifications
-
-## Device Health
-
-Keen Home Smart Vent with reporting interval of 10 mins.
-SmartThings platform will ping the device after `checkInterval` seconds of inactivity in last attempt to reach the device before marking it `OFFLINE` 
-
-* __22min__ checkInterval
-
-## Troubleshooting
-
-If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the sensor is out of range.
-Pairing needs to be tried again by placing the sensor closer to the hub.
-Instructions related to pairing, resetting and removing the different motion sensors from SmartThings can be found in the following links
-for the different models:
-* [Keen Home Smart Vent Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/205302050-Keen-Home-Smart-Vent)

devicetypes/keen-home/keen-home-smart-vent.src/keen-home-smart-vent.groovy

@@ -11,7 +11,6 @@ metadata {
         capability "Sensor"
         capability "Temperature Measurement"
         capability "Battery"
-        capability "Health Check"
 
         command "getLevel"
         command "getOnOff"
@@ -21,7 +20,10 @@ metadata {
         command "setZigBeeIdTile"
         command "clearObstruction"
 
-        fingerprint endpoint: "1", profileId: "0104", inClusters: "0000,0001,0003,0004,0005,0006,0008,0020,0402,0403,0B05,FC01,FC02", outClusters: "0019"
+        fingerprint endpoint: "1",
+        profileId: "0104",
+        inClusters: "0000,0001,0003,0004,0005,0006,0008,0020,0402,0403,0B05,FC01,FC02",
+        outClusters: "0019"
     }
 
     // simulator metadata
@@ -38,10 +40,10 @@ metadata {
     // UI tile definitions
     tiles {
         standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-            state "on", action: "switch.off", icon: "st.vents.vent-open-text", backgroundColor: "#00a0dc"
+            state "on", action: "switch.off", icon: "st.vents.vent-open-text", backgroundColor: "#53a7c0"
             state "off", action: "switch.on", icon: "st.vents.vent-closed", backgroundColor: "#ffffff"
-            state "obstructed", action: "clearObstruction", icon: "st.vents.vent-closed", backgroundColor: "#e86d13"
+            state "obstructed", action: "clearObstruction", icon: "st.vents.vent-closed", backgroundColor: "#ff0000"
-            state "clearing", action: "", icon: "st.vents.vent-closed", backgroundColor: "#ffffff"
+            state "clearing", action: "", icon: "st.vents.vent-closed", backgroundColor: "#ffff33"
         }
         controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 2, inactiveLabel: false) {
             state "level", action:"switch level.setLevel"
@@ -464,27 +466,15 @@ def refresh() {
     getBattery()
 }
 
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-    return refresh()
-}
-
 def configure() {
     log.debug "CONFIGURE"
 
-    // Device-Watch allows 2 check-in misses from device + ping (plus 1 min lag time)
-    // enrolls with default periodic reporting until newer 5 min interval is confirmed
-    sendEvent(name: "checkInterval", value: 2 * 10 * 60 + 2 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-
     // get ZigBee ID by hidden tile because that's the only way we can do it
     setZigBeeIdTile()
 
     def configCmds = [
         // bind reporting clusters to hub
-            //commenting out switch cluster bind as using wrapper onOffConfig of zigbee class
+        "zdo bind 0x${device.deviceNetworkId} 1 1 0x0006 {${device.zigbeeId}} {}", "delay 500",
-        //"zdo bind 0x${device.deviceNetworkId} 1 1 0x0006 {${device.zigbeeId}} {}", "delay 500",
         "zdo bind 0x${device.deviceNetworkId} 1 1 0x0008 {${device.zigbeeId}} {}", "delay 500",
         "zdo bind 0x${device.deviceNetworkId} 1 1 0x0402 {${device.zigbeeId}} {}", "delay 500",
         "zdo bind 0x${device.deviceNetworkId} 1 1 0x0403 {${device.zigbeeId}} {}", "delay 500",
@@ -520,5 +510,5 @@ def configure() {
         // "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
     ]
 
-    return configCmds + zigbee.onOffConfig() + refresh()
+    return configCmds + refresh()
 }

devicetypes/osotech/plantlink.src/.st-ignore

@@ -1,2 +0,0 @@
-.st-ignore
-README.md

devicetypes/osotech/plantlink.src/README.md

@@ -1,33 +0,0 @@
-# Osotech Plant Link
-
-Cloud Execution
-
-Works with: 
-
-* [OSO Technologies PlantLink Soil Moisture Sensor](https://www.smartthings.com/works-with-smartthings/oso-technologies/oso-technologies-plantlink-soil-moisture-sensor)
-
-## Table of contents
-
-* [Capabilities](#capabilities)
-* [Health](#device-health)
-* [Troubleshooting](#troubleshooting)
-
-## Capabilities
-
-* **Sensor** - detects sensor events
-* **Health Check** - indicates ability to get device health notifications
-
-## Device Health
-
-Plant Link sensor is a ZigBee sleepy device and checks in every 15 minutes.
-Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*15 + 2)mins = 32 mins.
-
-* __32min__ checkInterval
-
-## Troubleshooting
-
-If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the sensor is out of range.
-Pairing needs to be tried again by placing the sensor closer to the hub.
-Instructions related to pairing, resetting and removing the different motion sensors from SmartThings can be found in the following links
-for the different models:
-* [OSO Technologies PlantLink Soil Moisture Sensor Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206868986-PlantLink-Soil-Moisture-Sensor)

devicetypes/osotech/plantlink.src/plantlink.groovy

@@ -24,7 +24,6 @@ import groovy.json.JsonBuilder
 metadata {
     definition (name: "PlantLink", namespace: "OsoTech", author: "Oso Technologies") {
         capability "Sensor"
-        capability "Health Check"
 
         command "setStatusIcon"
         command "setPlantFuelLevel"
@@ -71,16 +70,6 @@ metadata {
     }
 }
 
-def updated() {
-    // Device-Watch allows 2 check-in misses from device
-    sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-}
-
-def installed() {
-    // Device-Watch allows 2 check-in misses from device
-    sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-}
-
 def setStatusIcon(value){
     def status = ''
     switch (value) {
@@ -172,4 +161,4 @@ def parseDescriptionAsMap(description) {
         	map += []
         }
     }
-}
+}

devicetypes/plaidsystems/spruce-controller.src/spruce-controller.groovy

@@ -1,5 +1,6 @@
 /**
- *  Spruce Controller V2_4 Big Tiles *
+ *  Spruce Controller - Pre Release V2 10/11/2015
+ *
  *  Copyright 2015 Plaid Systems
  *
  *	Author: NC
@@ -20,96 +21,82 @@
  */
 
 metadata {
-	definition (name: 'Spruce Controller', namespace: 'plaidsystems', author: 'Plaid Systems') {
+	definition (name: "Spruce Controller", namespace: "plaidsystems", author: "NCauffman") {
-		capability 'Switch'
+		capability "Switch"
-        capability 'Configuration'
+        capability "Configuration"
-        capability 'Refresh'
+        capability "Refresh"
-        capability 'Actuator'
+        capability "Actuator"
-        capability 'Valve'        
+        capability "Valve"        
 		
-        attribute 'switch', 'string'
+        attribute "switch", "string"
-        attribute 'switch1', 'string'
+        attribute "switch1", "string"
-		attribute 'switch2', 'string'
+		attribute "switch2", "string"
-		attribute 'switch8', 'string'
+		attribute "switch8", "string"
-		attribute 'switch5', 'string'
+		attribute "switch5", "string"
-		attribute 'switch3', 'string'
+		attribute "switch3", "string"
-		attribute 'switch4', 'string'
+		attribute "switch4", "string"
-		attribute 'switch6', 'string'
+		attribute "switch6", "string"
-		attribute 'switch7', 'string'
+		attribute "switch7", "string"
-        attribute 'switch9', 'string'
+        attribute "switch9", "string"
-		attribute 'switch10', 'string'
+		attribute "switch10", "string"
-		attribute 'switch11', 'string'
+		attribute "switch11", "string"
-		attribute 'switch12', 'string'
+		attribute "switch12", "string"
-		attribute 'switch13', 'string'
+		attribute "switch13", "string"
-		attribute 'switch14', 'string'
+		attribute "switch14", "string"
-		attribute 'switch15', 'string'
+		attribute "switch15", "string"
-        attribute 'switch16', 'string'
+        attribute "switch16", "string"
-		attribute 'rainsensor', 'string'
+		attribute "status", "string"        
-        attribute 'status', 'string'
-        attribute 'tileMessage', 'string'
-        attribute 'minutes', 'string'
-        attribute 'VALUE_UP', 'string'
-        attribute 'VALUE_DOWN', 'string'        
         
-        command 'levelUp'
+        command "programOn"
-        command 'levelDown'
+        command "programOff"
-        command 'programOn'
+        command "on"
-        command 'programOff'
+        command "off"
-        command 'programWait'
+        command "z1on"
-        command 'programEnd'
+		command "z1off"
+		command "z2on"
+		command "z2off"        
+		command "z3on"
+		command "z3off"
+		command "z4on"
+		command "z4off"
+		command "z5on"
+		command "z5off"
+		command "z6on"
+		command "z6off"
+		command "z7on"
+		command "z7off"
+		command "z8on"
+		command "z8off"
+        command "z9on"
+        command "z9off"
+		command "z10on"
+		command "z10off"
+		command "z11on"
+		command "z11off"
+		command "z12on"
+		command "z12off"
+		command "z13on"
+		command "z13off"
+		command "z14on"
+		command "z14off"
+		command "z15on"
+		command "z15off"
+		command "z16on"
+		command "z16off"
+        command "offtime"
         
-        command 'on'
+        command "refresh"        
-        command 'off'
+        command "rain"
-        command 'zon'
+        command "manual"
-        command 'zoff'
+        command "setDisplay"
-        command 'z1on'
-		command 'z1off'
-		command 'z2on'
-		command 'z2off'        
-		command 'z3on'
-		command 'z3off'
-		command 'z4on'
-		command 'z4off'
-		command 'z5on'
-		command 'z5off'
-		command 'z6on'
-		command 'z6off'
-		command 'z7on'
-		command 'z7off'
-		command 'z8on'
-		command 'z8off'
-        command 'z9on'
-        command 'z9off'
-		command 'z10on'
-		command 'z10off'
-		command 'z11on'
-		command 'z11off'
-		command 'z12on'
-		command 'z12off'
-		command 'z13on'
-		command 'z13off'
-		command 'z14on'
-		command 'z14off'
-		command 'z15on'
-		command 'z15off'
-		command 'z16on'
-		command 'z16off'
         
-        command 'config'
+        command "settingsMap"
-        command 'refresh'        
+        command "writeTime"
-        command 'rain'
+        command "writeType"        
-        command 'manual'
+        command "notify"
-        command 'manualTime'
+        command "updated"
-        command 'settingsMap'
+
-        command 'writeTime'
+		fingerprint endpointId: "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18", profileId: "0104", deviceId: "0002", deviceVersion: "00", inClusters: "0000,0003,0004,0005,0006,000F", outClusters: "0003, 0019", manufacturer: "PLAID SYSTEMS", model: "PS-SPRZ16-01"
-        command 'writeType'        
-        command 'notify'
-        command 'updated'      
-        
-		//ST release
-		//fingerprint endpointId: '1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18', profileId: '0104', deviceId: '0002', deviceVersion: '00', inClusters: '0000,0003,0004,0005,0006,000F', outClusters: '0003, 0019', manufacturer: 'PLAID SYSTEMS', model: 'PS-SPRZ16-01'
-		//new release
-        fingerprint endpointId: "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18", profileId: "0104", deviceId: "0002", deviceVersion: "00", inClusters: "0000,0003,0004,0005,0006,0009,000A,000F", outClusters: "0003, 0019", manufacturer: "PLAID SYSTEMS", model: "PS-SPRZ16-01"
 		
 	}
 
@@ -117,230 +104,162 @@ metadata {
 	simulator {
 		// status messages
 		
-		// reply messages		
+		// reply messages
+		
 	}
-    
     preferences {
-    input description: 'If you have a rain sensor wired to the rain sensor input on the Spruce controller, turn it on here.', displayDuringSetup: true, type: 'paragraph', element: 'paragraph', title: 'Rain Sensor'
+    input description: "Press Configure button after making changes to these preferences", displayDuringSetup: true, type: "paragraph", element: "paragraph", title: ""
-    input description: 'The SYNC SETTINGS button must be pressed after making a change to the Rain sensor:', displayDuringSetup: false, type: 'paragraph', element: 'paragraph', title: ''     
+    input "RainEnable", "bool", title: "Rain Sensor Attached?", required: false, displayDuringSetup: true
-    input 'RainEnable', 'bool', title: 'Rain Sensor Attached?', required: false, displayDuringSetup: true
+    input "ManualTime", "number", title: "Automatic shutoff time when a zone is turned on manually?", required: false, displayDuringSetup: true
-    input description: 'Adjust manual water time with arrows on main tile.  The time indicated in the first small tile indicates the time the zone will water when manually switched on.', displayDuringSetup: false, type: 'paragraph', element: 'paragraph', title: ''
+	}
-    }
 
 	// UI tile definitions
 	tiles {
     
-    	multiAttributeTile(name:"switchall", type:"generic", width:6, height:4) {        
+    	standardTile("status", "device.status") {            
-            tileAttribute('device.status', key: 'PRIMARY_CONTROL') {
+            state "schedule", label: 'Schedule Set', icon: "http://www.plaidsystems.com/smartthings/st_spruce_leaf_225_t.png"
-            attributeState 'schedule', label: 'Ready', icon: 'http://www.plaidsystems.com/smartthings/st_spruce_leaf_225_top.png'
+            state "finished", label: 'Spruce Finished', icon: "st.Outdoor.outdoor5", backgroundColor: "#46c2e8"
-            attributeState 'finished', label: 'Finished', icon: 'st.Outdoor.outdoor5', backgroundColor: '#46c2e8'
+            state "raintoday", label: 'Rain Today', icon: "st.custom.wuk.nt_chancerain"
-            attributeState 'raintoday', label: 'Rain Today', icon: 'http://www.plaidsystems.com/smartthings/st_rain.png', backgroundColor: '#d65fe3'
+            state "rainy", label: 'Previous Rain', icon: "st.custom.wuk.nt_chancerain"
-            attributeState 'rainy', label: 'Rain', icon: 'http://www.plaidsystems.com/smartthings/st_rain.png', backgroundColor: '#d65fe3'
+            state "raintom", label: 'Rain Tomorrow', icon: "st.custom.wuk.nt_chancerain"           
-            attributeState 'raintom', label: 'Rain Tomorrow', icon: 'http://www.plaidsystems.com/smartthings/st_rain.png', backgroundColor: '#d65fe3'
+            state "donewweek", label: 'Spruce Finished', icon: "st.Outdoor.outdoor5", backgroundColor: "#52c435"
-            attributeState 'donewweek', label: 'Finished', icon: 'st.Outdoor.outdoor5', backgroundColor: '#00A0DC'
+            state "skipping", label: 'Skip Today', icon: "st.Outdoor.outdoor20", backgroundColor: "#36cfe3"
-            attributeState 'skipping', label: 'Skip', icon: 'st.Outdoor.outdoor20', backgroundColor: '#46c2e8'
+            state "moisture", label: '', icon: "st.Weather.weather2", backgroundColor: "#36cfe3"
-            attributeState 'moisture', label: 'Ready', icon: 'st.Weather.weather2', backgroundColor: '#46c2e8'
+            state "pause", label: 'PAUSE', icon: "st.contact.contact.open", backgroundColor: "#f2a51f"           
-            attributeState 'pause', label: 'PAUSE', icon: 'st.contact.contact.open', backgroundColor: '#e86d13'
+            state "active", label: 'Active', icon: "st.Outdoor.outdoor12", backgroundColor: "#3DC72E"
-			attributeState 'delayed', label: 'Delayed', icon: 'st.contact.contact.open', backgroundColor: '#e86d13'
+            state "season", label: 'Seasonal Adjustment', icon: "st.Outdoor.outdoor17", backgroundColor: "#ffb900"
-            attributeState 'active', label: 'Active', icon: 'st.Outdoor.outdoor12', backgroundColor: '#3DC72E'
+            state "disable", label: 'Disabled', icon: "st.secondary.off", backgroundColor: "#888888"
-            attributeState 'season', label: 'Adjust', icon: 'st.Outdoor.outdoor17', backgroundColor: '#ffb900'
+            state "warning", label: '', icon: "st.categories.damageAndDanger", backgroundColor: "#ffff7f"
-            attributeState 'disable', label: 'Off', icon: 'st.secondary.off', backgroundColor: '#cccccc'
+            state "alarm", label: 'Alarm', icon: "st.categories.damageAndDanger", backgroundColor: "#f9240c"
-            attributeState 'warning', label: 'Warning', icon: 'http://www.plaidsystems.com/smartthings/st_spruce_leaf_225_top_yellow.png'
-            attributeState 'alarm', label: 'Alarm', icon: 'http://www.plaidsystems.com/smartthings/st_spruce_leaf_225_s_red.png', backgroundColor: '#e66565'
-            }
-            
-            tileAttribute("device.minutes", key: "VALUE_CONTROL") {
-                attributeState "VALUE_UP", action: "levelUp"
-                attributeState "VALUE_DOWN", action: "levelDown"
-            }
-            
-            tileAttribute("device.tileMessage", key: "SECONDARY_CONTROL") {
-                attributeState "tileMessage", label: '${currentValue}'     
-            }            
-            
         }
-        valueTile('minutes', 'device.minutes'){
+		standardTile("switch", "device.switch") {			
-        	state 'minutes', label: '${currentValue} min'
+			//state "programOff", label: 'Start Program', action: "programOn", icon: "st.sonos.play-icon", backgroundColor: "#a9a9a9"
-        }
+            state "off", label: 'Start Program', action: "programOn", icon: "st.sonos.play-icon", backgroundColor: "#a9a9a9"
-        valueTile('dummy', 'device.minutes'){
+            state "programOn", label: 'Initialize Program', action: "programOff", icon: "st.contact.contact.open", backgroundColor: "#f6e10e"            
-        	state 'minutes', label: ''
+            state "on", label: 'Program Running', action: "off", icon: "st.Outdoor.outdoor12", backgroundColor: "#3DC72E"
-        }
+		}
-		standardTile('switch', 'device.switch', width:2, height:2) {
+        standardTile("rainsensor", "device.rainsensor") {			
-            state 'off', label: 'Start', action: 'programOn', icon: 'st.Outdoor.outdoor12', backgroundColor: '#a9a9a9'
+			state "rainSensrooff", label: 'Rain Sensor Clear', icon: "st.Weather.weather14", backgroundColor: "#a9a9a9"
-            state 'programOn', label: 'Wait', action: 'programOff', icon: 'st.contact.contact.open', backgroundColor: '#f6e10e'
+            state "rainSensoron", label: 'Rain Detected', icon: "st.Weather.weather10", backgroundColor: "#f6e10e"
-            state 'programWait', label: 'Wait', action: 'programEnd', icon: 'st.contact.contact.open', backgroundColor: '#f6e10e'
+		}    	
-            state 'on', label: 'Running', action: 'programEnd', icon: 'st.Outdoor.outdoor12', backgroundColor: '#3DC72E'
+        standardTile("switch1", "device.switch1") {			
+			state "z1off", label: '1', action: "z1on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
+            state "z1on", label: '1', action: "z1off", icon: "st.valves.water.open", backgroundColor: "#46c2e8"
+		}
+        standardTile("switch2", "device.switch2") {            
+            state "z2off", label: '2', action: "z2on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
+            state "z2on", label: '2', action: "z2off", icon: "st.valves.water.open", backgroundColor: "#46c2e8"
 		}        
-        standardTile("rainsensor", "device.rainsensor", decoration: 'flat') {			
+        standardTile("switch3", "device.switch3", inactiveLabel: false) {			
-			state "rainSensoroff", label: 'sensor', icon: 'http://www.plaidsystems.com/smartthings/st_drop_on.png'
+			state "z3off", label: '3', action: "z3on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-            state "rainSensoron", label: 'sensor', icon: 'http://www.plaidsystems.com/smartthings/st_drop_on_blue_small.png'
+            state "z3on", label: '3', action: "z3off", icon: "st.valves.water.open", backgroundColor: "#46c2e8"
-            state "disable", label: 'sensor', icon: 'http://www.plaidsystems.com/smartthings/st_drop_x_small.png'
-            state "enable", label: 'sensor', icon: 'http://www.plaidsystems.com/smartthings/st_drop_on.png'
 		}
-        standardTile('switch1', 'device.switch1', inactiveLabel: false) {			
+        standardTile("switch4", "device.switch4", inactiveLabel: false) {            
-			state 'z1off', label: '1', action: 'z1on', icon: 'st.valves.water.closed', backgroundColor: '#ffffff'
+            state "z4off", label: '4', action: "z4on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-            state 'z1on', label: '1', action: 'z1off', icon: 'st.valves.water.open', backgroundColor: '#00A0DC'
+            state "z4on", label: '4', action: "z4off", icon: "st.valves.water.open", backgroundColor: "#46c2e8"
 		}
-        standardTile('switch2', 'device.switch2', inactiveLabel: false) {            
+        standardTile("switch5", "device.switch5", inactiveLabel: false) {            
-            state 'z2off', label: '2', action: 'z2on', icon: 'st.valves.water.closed', backgroundColor: '#ffffff'
+            state "z5off", label: '5', action: "z5on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-            state 'z2on', label: '2', action: 'z2off', icon: 'st.valves.water.open', backgroundColor: '#00A0DC'
+            state "z5on", label: '5', action: "z5off", icon: "st.valves.water.open", backgroundColor: "#46c2e8"
+		}
+		standardTile("switch6", "device.switch6", inactiveLabel: false) {            
+            state "z6off", label: '6', action: "z6on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
+            state "z6on", label: '6', action: "z6off", icon: "st.valves.water.open", backgroundColor: "#46c2e8"
+		}
+        standardTile("switch7", "device.switch7", inactiveLabel: false) {            
+            state "z7off", label: '7', action: "z7on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
+            state "z7on", label: '7', action: "z7off", icon: "st.valves.water.open", backgroundColor: "#46c2e8"
+		}
+		standardTile("switch8", "device.switch8", inactiveLabel: false) {            
+            state "z8off", label: '8', action: "z8on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
+            state "z8on", label: '8', action: "z8off", icon: "st.valves.water.open", backgroundColor: "#46c2e8"
+		}
+        standardTile("switch9", "device.switch9", inactiveLabel: false) {			
+			state "z9off", label: '9', action: "z9on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
+            state "z9on", label: '9', action: "z9off", icon: "st.valves.water.open", backgroundColor: "#46c2e8"
+		}
+        standardTile("switch10", "device.switch10", inactiveLabel: false) {            
+            state "z10off", label: '10', action: "z10on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
+            state "z10on", label: '10', action: "z10off", icon: "st.valves.water.open", backgroundColor: "#46c2e8"
 		}        
-        standardTile('switch3', 'device.switch3', inactiveLabel: false) {			
+        standardTile("switch11", "device.switch11", inactiveLabel: false) {			
-			state 'z3off', label: '3', action: 'z3on', icon: 'st.valves.water.closed', backgroundColor: '#ffffff'
+			state "z11off", label: '11', action: "z11on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-            state 'z3on', label: '3', action: 'z3off', icon: 'st.valves.water.open', backgroundColor: '#00A0DC'
+            state "z11on", label: '11', action: "z11off", icon: "st.valves.water.open", backgroundColor: "#46c2e8"
 		}
-        standardTile('switch4', 'device.switch4', inactiveLabel: false) {            
+        standardTile("switch12", "device.switch12", inactiveLabel: false) {            
-            state 'z4off', label: '4', action: 'z4on', icon: 'st.valves.water.closed', backgroundColor: '#ffffff'
+            state "z12off", label: '12', action: "z12on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-            state 'z4on', label: '4', action: 'z4off', icon: 'st.valves.water.open', backgroundColor: '#00A0DC'
+            state "z12on", label: '12', action: "z12off", icon: "st.valves.water.open", backgroundColor: "#46c2e8"
 		}
-        standardTile('switch5', 'device.switch5', inactiveLabel: false) {            
+        standardTile("switch13", "device.switch13", inactiveLabel: false) {            
-            state 'z5off', label: '5', action: 'z5on', icon: 'st.valves.water.closed', backgroundColor: '#ffffff'
+            state "z13off", label: '13', action: "z13on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-            state 'z5on', label: '5', action: 'z5off', icon: 'st.valves.water.open', backgroundColor: '#00A0DC'
+            state "z13on", label: '13', action: "z13off", icon: "st.valves.water.open", backgroundColor: "#46c2e8"
 		}
-		standardTile('switch6', 'device.switch6', inactiveLabel: false) {            
+		standardTile("switch14", "device.switch14", inactiveLabel: false) {            
-            state 'z6off', label: '6', action: 'z6on', icon: 'st.valves.water.closed', backgroundColor: '#ffffff'
+            state "z14off", label: '14', action: "z14on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-            state 'z6on', label: '6', action: 'z6off', icon: 'st.valves.water.open', backgroundColor: '#00A0DC'
+            state "z14on", label: '14', action: "z14off", icon: "st.valves.water.open", backgroundColor: "#46c2e8"
 		}
-        standardTile('switch7', 'device.switch7', inactiveLabel: false) {            
+        standardTile("switch15", "device.switch15", inactiveLabel: false) {            
-            state 'z7off', label: '7', action: 'z7on', icon: 'st.valves.water.closed', backgroundColor: '#ffffff'
+            state "z15off", label: '15', action: "z15on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-            state 'z7on', label: '7', action: 'z7off', icon: 'st.valves.water.open', backgroundColor: '#00A0DC'
+            state "z15on", label: '15', action: "z15off", icon: "st.valves.water.open", backgroundColor: "#46c2e8"
-		}
-		standardTile('switch8', 'device.switch8', inactiveLabel: false) {            
-            state 'z8off', label: '8', action: 'z8on', icon: 'st.valves.water.closed', backgroundColor: '#ffffff'
-            state 'z8on', label: '8', action: 'z8off', icon: 'st.valves.water.open', backgroundColor: '#00A0DC'
-		}
-        standardTile('switch9', 'device.switch9', inactiveLabel: false) {			
-			state 'z9off', label: '9', action: 'z9on', icon: 'st.valves.water.closed', backgroundColor: '#ffffff'
-            state 'z9on', label: '9', action: 'z9off', icon: 'st.valves.water.open', backgroundColor: '#00A0DC'
-		}
-        standardTile('switch10', 'device.switch10', inactiveLabel: false) {            
-            state 'z10off', label: '10', action: 'z10on', icon: 'st.valves.water.closed', backgroundColor: '#ffffff'
-            state 'z10on', label: '10', action: 'z10off', icon: 'st.valves.water.open', backgroundColor: '#00A0DC'
-		}        
-        standardTile('switch11', 'device.switch11', inactiveLabel: false) {			
-			state 'z11off', label: '11', action: 'z11on', icon: 'st.valves.water.closed', backgroundColor: '#ffffff'
-            state 'z11on', label: '11', action: 'z11off', icon: 'st.valves.water.open', backgroundColor: '#00A0DC'
-		}
-        standardTile('switch12', 'device.switch12', inactiveLabel: false) {            
-            state 'z12off', label: '12', action: 'z12on', icon: 'st.valves.water.closed', backgroundColor: '#ffffff'
-            state 'z12on', label: '12', action: 'z12off', icon: 'st.valves.water.open', backgroundColor: '#00A0DC'
-		}
-        standardTile('switch13', 'device.switch13', inactiveLabel: false) {            
-            state 'z13off', label: '13', action: 'z13on', icon: 'st.valves.water.closed', backgroundColor: '#ffffff'
-            state 'z13on', label: '13', action: 'z13off', icon: 'st.valves.water.open', backgroundColor: '#00A0DC'
-		}
-		standardTile('switch14', 'device.switch14', inactiveLabel: false) {            
-            state 'z14off', label: '14', action: 'z14on', icon: 'st.valves.water.closed', backgroundColor: '#ffffff'
-            state 'z14on', label: '14', action: 'z14off', icon: 'st.valves.water.open', backgroundColor: '#00A0DC'
-		}
-        standardTile('switch15', 'device.switch15', inactiveLabel: false) {            
-            state 'z15off', label: '15', action: 'z15on', icon: 'st.valves.water.closed', backgroundColor: '#ffffff'
-            state 'z15on', label: '15', action: 'z15off', icon: 'st.valves.water.open', backgroundColor: '#00A0DC'
 		}		
-        standardTile('switch16', 'device.switch16', inactiveLabel: false) {            
+        standardTile("switch16", "device.switch16", inactiveLabel: false) {            
-            state 'z16off',  label: '16', action: 'z16on', icon: 'st.valves.water.closed', backgroundColor: '#ffffff'
+            state "z16off", label: '16', action: "z16on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-            state 'z16on',  label: '16', action: 'z16off', icon: 'st.valves.water.open', backgroundColor: '#00A0DC'
+            state "z16on", label: '16', action: "z16off", icon: "st.valves.water.open", backgroundColor: "#46c2e8"
 		}        
-        standardTile('refresh', 'device.switch', inactiveLabel: false, decoration: 'flat') {
+        standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
-			state 'default', action: 'refresh', icon:'st.secondary.refresh'//-icon'            
+			state "default", action: "refresh", icon:"st.secondary.refresh"            
 		}
-        standardTile('configure', 'device.configure', inactiveLabel: false, decoration: 'flat') {
+        standardTile("configure", "device.configure", inactiveLabel: false, decoration: "flat") {
-			state 'configure', label:'', action:'configuration.configure', icon:'http://www.plaidsystems.com/smartthings/st_syncsettings.png'//sync_icon_small.png'
+			state "configure", label:'', action:"configuration.configure", icon:"st.secondary.configure"
-		}        
+		}		
 		
-        main (['switchall'])        
+        main (["status"])        
-        details(['switchall','minutes','rainsensor','switch1','switch2','switch3','switch4','switch','switch5','switch6','switch7','switch8','switch9','switch10','switch11','switch12','refresh','configure','switch13','switch14','switch15','switch16'])		
+        details(["status","rainsensor","switch","switch1","switch2","switch3","switch4","switch5","switch6","switch7","switch8","switch9","switch10","switch11","switch12","switch13","switch14","switch15","switch16","refresh","configure"])		
-    }       
+    }    
 }
 
-//used for schedule 
 def programOn(){
-    sendEvent(name: 'switch', value: 'programOn', descriptionText: 'Program turned on')    
+    sendEvent(name: "switch", value: "programOn", descriptionText: "Program turned on")    
-    }
-
-def programWait(){    
-    sendEvent(name: 'switch', value: 'programWait', descriptionText: "Initializing Schedule")
-    }
-
-def programEnd(){
-	//sets switch to off and tells schedule switch is off/schedule complete with manaual
-    sendEvent(name: 'switch', value: 'off', descriptionText: 'Program manually turned off')
-    zoff() 
     }
     
 def programOff(){    
-    sendEvent(name: 'switch', value: 'off', descriptionText: 'Program turned off')
+    sendEvent(name: "switch", value: "off", descriptionText: "Program turned off")
     off()
     }
-
+    
-//set minutes
+def updated(){
-def levelUp(){
+	log.debug "updated"    
-	def newvalue = 1
-    if (device.latestValue('minutes') != null) newvalue = device.latestValue('minutes').toInteger()+1
-    if (newvalue >= 60) newvalue = 60
-    def value = newvalue.toString()    
-    log.debug value
-	sendEvent(name: 'minutes', value: "${value}", descriptionText: "Manual Time set to ${value}", display: false)    
-}
-
-def levelDown(){
-	def newvalue = device.latestValue('minutes').toInteger()-1
-    if (newvalue <= 0) newvalue = 1
-    def value = newvalue.toString()    
-    log.debug value
-	sendEvent(name: 'minutes', value: "${value}", descriptionText: "Manual Time set to ${value}", display: false)
 }
 
 // Parse incoming device messages to generate events
 def parse(String description) {	
-	log.debug "Parse description ${description}"
+	//log.debug "Parse description $description"
     def result = null
     def map = [:]
-	if (description?.startsWith('read attr -')) {
+	if (description?.startsWith("read attr -")) {
 		def descMap = parseDescriptionAsMap(description)
 		//log.debug "Desc Map: $descMap"
         //using 000F cluster instead of 0006 (switch) because ST does not differentiate between EPs and processes all as switch
-		if (descMap.cluster == '000F' && descMap.attrId == '0055') {
+		if (descMap.cluster == "000F" && descMap.attrId == "0055") {
-			log.debug 'Zone'
+			log.debug "Zone"
             map = getZone(descMap)            
 		}
-        else if (descMap.cluster == '0009' && descMap.attrId == '0000') {
+        else if (descMap.cluster == "0009" && descMap.attrId == "0000") {
-			log.debug 'Alarm'
+			log.debug "Alarm"            
             map = getAlarm(descMap)
             }
+	}     
+	
+	if (map) {
+		result = createEvent(map)
 	}
-    else if (description?.startsWith('catchall: 0104 0009')){
+	log.debug "Parse returned $map $result"
-    	log.debug 'Sync settings to controller complete'
-        if (device.latestValue('status') != 'alarm'){
-        	def configEvt = createEvent(name: 'status', value: 'schedule', descriptionText: "Sync settings to controller complete")
-            def configMsg = createEvent(name: 'tileMessage', value: 'Sync settings to controller complete', descriptionText: "Sync settings to controller complete", displayed: false)
-        	result = [configEvt, configMsg]
-            }
-        return result
-    }
-  
-    if (map) {
-    	result = createEvent(map)
-    	//configure after reboot
-        if (map.value == 'warning' || map.value == 'alarm'){
-            def cmds = config()       
-            def alarmEvt = createEvent(name: 'tileMessage', value: map.descriptionText, descriptionText: "${map.descriptionText}", displayed: false)
-            result = cmds?.collect { new physicalgraph.device.HubAction(it) } + createEvent(map) + alarmEvt           
-			return result
-		}
-        else if (map.name == 'rainsensor'){
-        	def rainEvt = createEvent(name: 'tileMessage', value: map.descriptionText, descriptionText: "${map.descriptionText}", displayed: false)
-        	result = [createEvent(map), rainEvt]
-            return result
-        }
-	}
-	if (map) log.debug "Parse returned ${map} ${result}"
 	return result
 }
 
 def parseDescriptionAsMap(description) {
-	(description - 'read attr - ').split(',').inject([:]) { map, param ->
+	(description - "read attr - ").split(",").inject([:]) { map, param ->
-		def nameAndValue = param.split(':')
+		def nameAndValue = param.split(":")
 		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
 	}
 }
@@ -351,28 +270,27 @@ def getZone(descMap){
     def EP = Integer.parseInt(descMap.endpoint.trim(), 16)
     
     String onoff
-    if(descMap.value == '00'){
+    if(descMap.value == "00"){
-    	onoff = 'off'        
+    	onoff = "off"        
     }    
-    else onoff = 'on'
+    else onoff = "on"
             
     if (EP == 1){
-    	map.name = 'switch'
+    	map.name = "switch"
         map.value = onoff
-        map.descriptionText = "${device.displayName} turned sprinkler program ${onoff}"
+        map.descriptionText = "${device.displayName} turned sprinkler program $onoff"
         }
         
     else if (EP == 18) {
-        map.name = 'rainsensor'
+        map.name = "rainsensor"
-    	log.debug "Rain enable: ${RainEnable}, sensor: ${onoff}"
+    	map.value = "rainSensor" + onoff
-        map.value = 'rainSensor' + onoff
+        map.descriptionText = "${device.displayName} rain sensor is $onoff"
-        map.descriptionText = "${device.displayName} rain sensor is ${onoff}"
         }
    	else {
         EP -= 1
-        map.name = 'switch' + EP
+        map.name = "switch" + EP
-    	map.value = 'z' + EP + onoff
+    	map.value = "z" + EP + onoff
-    	map.descriptionText = "${device.displayName} turned Zone $EP ${onoff}"
+    	map.descriptionText = "${device.displayName} turned Zone $EP $onoff"
     	}
         
     map.isStateChange = true 
@@ -382,59 +300,37 @@ def getZone(descMap){
 
 def getAlarm(descMap){
 	def map = [:]
-    map.name = 'status'
+    map.name = "status"
     def alarmID = Integer.parseInt(descMap.value.trim(), 16)
     log.debug "${alarmID}"
-    map.value = 'alarm'
+    if(alarmID <= 0) map.descriptionText = "${device.displayName} has rebooted, no other alarms"
-    map.displayed = true
+    else map.descriptionText = "${device.displayName} rebooted, reported error on zone ${alarmID - 1}, please check zone is working correctly"    
+	map.value = "alarm"
     map.isStateChange = true
-    if(alarmID <= 0){
+    map.displayed = true
-    	map.descriptionText = "${device.displayName} reboot, no other alarms"
-        map.value = 'warning'
-        //map.isStateChange = false
-        }
-    else map.descriptionText = "${device.displayName} reboot, reported zone ${alarmID - 1} error, please check zone is working correctly, press SYNC SETTINGS button to clear"
-       
     return map        
 }
 
 //status notify and change status
-def notify(String val, String txt){
+def notify(value, text){	
-	sendEvent(name: 'status', value: val, descriptionText: txt, isStateChange: true, display: false)
+	sendEvent(name:"status", value:"$value", descriptionText:"$text", isStateChange: true, display: false)
-    
-    //String txtShort = txt.take(100)
-    sendEvent(name: 'tileMessage', value: txt, descriptionText: "", isStateChange: true, display: false)
-}
 
-def updated(){
-	log.debug "updated"
-    
 }
 
 //prefrences - rain sensor, manual time
 def rain() {
-    log.debug "Rain sensor: ${RainEnable}"
+    log.debug "Rain $RainEnable"
-    if (RainEnable) sendEvent(name: 'rainsensor', value: 'enable', descriptionText: "${device.displayName} rain sensor is enabled", isStateChange: true)
-    else sendEvent(name: 'rainsensor', value: 'disable', descriptionText: "${device.displayName} rain sensor is disabled", isStateChange: true)
-    
     if (RainEnable) "st wattr 0x${device.deviceNetworkId} 18 0x0F 0x51 0x10 {01}"
     else "st wattr 0x${device.deviceNetworkId} 18 0x0F 0x51 0x10 {00}"
 }
-
+def manual(){
-def manualTime(value){	
+	log.debug "Time $ManualTime"
-	sendEvent(name: 'minutes', value: "${value}", descriptionText: "Manual Time set to ${value}", display: false)
+    def mTime = 10
-}
+    if (ManualTime) mTime = ManualTime
-
+    def manualTime = hex(mTime)
-def manual(){    
+    "st wattr 0x${device.deviceNetworkId} 1 6 0x4002 0x21 {00${manualTime}}"
-    def newManaul = 10    
-    if (device.latestValue('minutes')) newManaul = device.latestValue('minutes').toInteger()    
-    log.debug "Manual Zone runtime ${newManaul} mins"    
-    def manualTime = hex(newManaul)  
     
-    def sendCmds = []
+    }
-    sendCmds.push("st wattr 0x${device.deviceNetworkId} 1 6 0x4002 0x21 {00${manualTime}}")
-    return sendCmds
-}
 
 //write switch time settings map
 def settingsMap(WriteTimes, attrType){
@@ -470,20 +366,13 @@ def writeTime(wEP, runTime){
 
 //set reporting and binding
 def configure() {
-	
-    sendEvent(name: 'status', value: 'schedule', descriptionText: "Syncing settings to controller")
-    sendEvent(name: 'minutes', value: "10", descriptionText: "Manual Time set to 10 mins", display: false)
-    sendEvent(name: 'tileMessage', value: 'Syncing settings to controller', descriptionText: 'Syncing settings to controller')
-    config()    
-}
-
-def config(){
 
 	String zigbeeId = swapEndianHex(device.hub.zigbeeId)
-	log.debug "Configuring Reporting and Bindings ${device.deviceNetworkId} ${device.zigbeeId}"
+	log.debug "Confuguring Reporting and Bindings ${device.deviceNetworkId} ${device.zigbeeId}"
+	sendEvent(name: 'configuration',value: 100, descriptionText: "Configuration initialized")
     
     def configCmds = [	
-        //program on/off        
+        //program on/off
         "zdo bind 0x${device.deviceNetworkId} 1 1 6 {${device.zigbeeId}} {}", "delay 1000",
         "zdo bind 0x${device.deviceNetworkId} 1 1 0x09 {${device.zigbeeId}} {}", "delay 1000",        
         "zdo bind 0x${device.deviceNetworkId} 1 1 0x0F {${device.zigbeeId}} {}", "delay 1000",
@@ -569,16 +458,38 @@ def config(){
         "zcl global send-me-a-report 0x09 0x00 0x21 1 0 {00}", "delay 500",
         "send 0x${device.deviceNetworkId} 1 1", "delay 500"
 	]
-    return configCmds + rain()
+    return configCmds + rain() + manual()
 }
 
+
+
+private hex(value) {
+	new BigInteger(Math.round(value).toString()).toString(16)
+}
+
+private String swapEndianHex(String hex) {
+    reverseArray(hex.decodeHex()).encodeHex()
+}
+
+private byte[] reverseArray(byte[] array) {
+    int i = 0;
+    int j = array.length - 1;
+    byte tmp;
+    while (j > i) {
+        tmp = array[j];
+        array[j] = array[i];
+        array[i] = tmp;
+        j--;
+        i++;
+    }
+    return array
+}    
+
 def refresh() {
 
-	log.debug "refresh pressed"
+	log.debug "refresh"
-    sendEvent(name: 'tileMessage', value: 'Refresh', descriptionText: 'Refresh')
+    def refreshCmds = [
-        
+	        
-    def refreshCmds = [	    
-        
         "st rattr 0x${device.deviceNetworkId} 1 0x0F 0x55", "delay 500",
         
         "st rattr 0x${device.deviceNetworkId} 2 0x0F 0x55", "delay 500",
@@ -602,96 +513,64 @@ def refresh() {
         "st rattr 0x${device.deviceNetworkId} 18 0x0F 0x51","delay 500",
  	
     ]
-    
+    return refreshCmds + rain() + manual()
-    return refreshCmds
-}
-
-private hex(value) {
-	new BigInteger(Math.round(value).toString()).toString(16)
-}
-
-private String swapEndianHex(String hex) {
-    reverseArray(hex.decodeHex()).encodeHex()
-}
-
-private byte[] reverseArray(byte[] array) {
-    int i = 0;
-    int j = array.length - 1;
-    byte tmp;
-    while (j > i) {
-        tmp = array[j];
-        array[j] = array[i];
-        array[i] = tmp;
-        j--;
-        i++;
-    }
-    return array
-}
-
-//on & off redefined for Alexa to start manual schedule
-def on() {    
-    log.debug 'Alexa on'
-    //schedule subscribes to programOn
-    sendEvent(name: 'switch', value: 'programOn', descriptionText: 'Alexa turned program on')           
-}
-def off() {
-	log.debug 'Alexa off'
-    sendEvent(name: 'switch', value: 'off', descriptionText: 'Alexa turned program off')
-    zoff()        
 }
 
 // Commands to device
 //zones on - 8
-def zon() {
+def on() {
-	"st cmd 0x${device.deviceNetworkId} 1 6 1 {}"
+    //sendEvent(name:"status", value:"active", descriptionText:"Program Running", isStateChange: true, display: false)
+    log.debug "on"
+    "st cmd 0x${device.deviceNetworkId} 1 6 1 {}"    
 }
-def zoff() {
+def off() {
-	"st cmd 0x${device.deviceNetworkId} 1 6 0 {}" 
+    log.debug "off"
+    "st cmd 0x${device.deviceNetworkId} 1 6 0 {}"    
 }
 def z1on() {	
-    return manual() + "st cmd 0x${device.deviceNetworkId} 2 6 1 {}"    
+    "st cmd 0x${device.deviceNetworkId} 2 6 1 {}"
 }
 def z1off() {    
     "st cmd 0x${device.deviceNetworkId} 2 6 0 {}"
 }
 def z2on() {	
-    return manual() + "st cmd 0x${device.deviceNetworkId} 3 6 1 {}"    
+    "st cmd 0x${device.deviceNetworkId} 3 6 1 {}"    
 }
 def z2off() {    
     "st cmd 0x${device.deviceNetworkId} 3 6 0 {}"    
 }
 def z3on() {        
-    return manual() + "st cmd 0x${device.deviceNetworkId} 4 6 1 {}"    
+    "st cmd 0x${device.deviceNetworkId} 4 6 1 {}"    
 }
 def z3off() {	
     "st cmd 0x${device.deviceNetworkId} 4 6 0 {}"    
 }
 def z4on() {	
-    return manual() + "st cmd 0x${device.deviceNetworkId} 5 6 1 {}"    
+    "st cmd 0x${device.deviceNetworkId} 5 6 1 {}"    
 }
 def z4off() {    
     "st cmd 0x${device.deviceNetworkId} 5 6 0 {}"    
 }
 def z5on() {	
-	return manual() + "st cmd 0x${device.deviceNetworkId} 6 6 1 {}"   
+	"st cmd 0x${device.deviceNetworkId} 6 6 1 {}"   
 }
 def z5off() {
 	"st cmd 0x${device.deviceNetworkId} 6 6 0 {}"    
 }
 def z6on() {
-	return manual() + "st cmd 0x${device.deviceNetworkId} 7 6 1 {}"
+	"st cmd 0x${device.deviceNetworkId} 7 6 1 {}"
 }
 def z6off() {
     "st cmd 0x${device.deviceNetworkId} 7 6 0 {}"
 }
 def z7on() {
-	return manual() + "st cmd 0x${device.deviceNetworkId} 8 6 1 {}"  
+	"st cmd 0x${device.deviceNetworkId} 8 6 1 {}"  
 }
 def z7off() {
 	"st cmd 0x${device.deviceNetworkId} 8 6 0 {}"    
 }
 def z8on() {
-	return manual() + "st cmd 0x${device.deviceNetworkId} 9 6 1 {}"    
+	"st cmd 0x${device.deviceNetworkId} 9 6 1 {}"    
 }
 def z8off() {
 	"st cmd 0x${device.deviceNetworkId} 9 6 0 {}"    
@@ -699,51 +578,50 @@ def z8off() {
 
 //zones 9 - 16
 def z9on() {	
-    return manual() + "st cmd 0x${device.deviceNetworkId} 10 6 1 {}"    
+    "st cmd 0x${device.deviceNetworkId} 10 6 1 {}"    
 }
 def z9off() {	    
     "st cmd 0x${device.deviceNetworkId} 10 6 0 {}"   
 }
 def z10on() {	
-    return manual() + "st cmd 0x${device.deviceNetworkId} 11 6 1 {}"    
+    "st cmd 0x${device.deviceNetworkId} 11 6 1 {}"    
 }
 def z10off() {    
     "st cmd 0x${device.deviceNetworkId} 11 6 0 {}"    
 }
 def z11on() {        
-    return manual() + "st cmd 0x${device.deviceNetworkId} 12 6 1 {}"    
+    "st cmd 0x${device.deviceNetworkId} 12 6 1 {}"    
 }
 def z11off() {	
     "st cmd 0x${device.deviceNetworkId} 12 6 0 {}"    
 }
 def z12on() {	
-    return manual() + "st cmd 0x${device.deviceNetworkId} 13 6 1 {}"    
+    "st cmd 0x${device.deviceNetworkId} 13 6 1 {}"    
 }
 def z12off() {    
     "st cmd 0x${device.deviceNetworkId} 13 6 0 {}"    
 }
 def z13on() {	
-	return manual() + "st cmd 0x${device.deviceNetworkId} 14 6 1 {}"   
+	"st cmd 0x${device.deviceNetworkId} 14 6 1 {}"   
 }
 def z13off() {
 	"st cmd 0x${device.deviceNetworkId} 14 6 0 {}"    
 }
 def z14on() {
-	return manual() + "st cmd 0x${device.deviceNetworkId} 15 6 1 {}"
+	"st cmd 0x${device.deviceNetworkId} 15 6 1 {}"
 }
 def z14off() {
     "st cmd 0x${device.deviceNetworkId} 15 6 0 {}"
 }
 def z15on() {
-	return manual() + "st cmd 0x${device.deviceNetworkId} 16 6 1 {}"  
+	"st cmd 0x${device.deviceNetworkId} 16 6 1 {}"  
 }
 def z15off() {
 	"st cmd 0x${device.deviceNetworkId} 16 6 0 {}"    
 }
 def z16on() {
-	return manual() + "st cmd 0x${device.deviceNetworkId} 17 6 1 {}"    
+	"st cmd 0x${device.deviceNetworkId} 17 6 1 {}"    
 }
 def z16off() {
 	"st cmd 0x${device.deviceNetworkId} 17 6 0 {}"    
-}
+}
-

devicetypes/plaidsystems/spruce-sensor.src/spruce-sensor.groovy

@@ -1,5 +1,5 @@
 /**
- *  Spruce Sensor -updated with SLP model number 5/2017
+ *  Spruce Sensor -Pre-release V2 10/8/2015
  *
  *  Copyright 2014 Plaid Systems
  *
@@ -14,33 +14,25 @@
  *
  -------10/20/2015 Updates--------
  -Fix/add battery reporting interval to update
- -remove polling and/or refresh
+ -remove polling and/or refresh(?)
- 
- -------5/2017 Updates--------
- -Add fingerprints for SLP
- -add device health, check every 60mins + 2mins
  */
- 
 metadata {
-	definition (name: "Spruce Sensor", namespace: "plaidsystems", author: "Plaid Systems") {
+	definition (name: "Spruce Sensor", namespace: "plaidsystems", author: "NCauffman") {
 		
 		capability "Configuration"
 		capability "Battery"
         capability "Relative Humidity Measurement"
         capability "Temperature Measurement"
         capability "Sensor"
-        capability "Health Check"
         //capability "Polling"
 		
         attribute "maxHum", "string"
         attribute "minHum", "string"        
         
-        
         command "resetHumidity"
         command "refresh"
         
-        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0402,0405", outClusters: "0003, 0019", manufacturer: "PLAID SYSTEMS", model: "PS-SPRZMS-01", deviceJoinName: "Spruce Sensor"
+        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0402,0405", outClusters: "0003, 0019", manufacturer: "PLAID SYSTEMS", model: "PS-SPRZMS-01"
-        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0402,0405", outClusters: "0003, 0019", manufacturer: "PLAID SYSTEMS", model: "PS-SPRZMS-SLP1", deviceJoinName: "Spruce Sensor"
 	}
 
 	preferences {
@@ -73,7 +65,7 @@ metadata {
 					[value: 64, color: "#44B621"],
 					[value: 80, color: "#3D79D9"],
 					[value: 96, color: "#0A50C2"]
-				], icon:"st.Weather.weather12"
+				]
 		}
         
         valueTile("maxHum", "device.maxHum", canChangeIcon: false, canChangeBackground: false) {
@@ -301,11 +293,6 @@ def setConfig(){
     sendEvent(name: 'configuration',value: configInterval, descriptionText: "Configuration initialized")
 }
 
-def installed(){
-	//check every 1 hour + 2mins
-    sendEvent(name: "checkInterval", value: 1 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
-}
-
 //when device preferences are changed
 def updated(){	
     log.debug "device updated"
@@ -316,8 +303,6 @@ def updated(){
             sendEvent(name: 'configuration',value: 0, descriptionText: "Settings changed and will update at next report. Measure interval set to ${interval} mins")
     	}
     }
-    //check every 1 hour + 2mins
-    sendEvent(name: "checkInterval", value: 1 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 }
 
 //poll
@@ -410,4 +395,4 @@ private byte[] reverseArray(byte[] array) {
         i++;
     }
     return array
-}
+}

devicetypes/roomieremote-agent/simple-sync.src/simple-sync.groovy

@@ -22,7 +22,7 @@ metadata
     {
 		standardTile("mainTile", "device.status", width: 1, height: 1, icon: "st.Entertainment.entertainment11")
         {
-        	state "default", label: "Simple Sync", icon: "st.Home.home2", backgroundColor: "#00a0dc"
+        	state "default", label: "Simple Sync", icon: "st.Home.home2", backgroundColor: "#55A7FF"
 		}
         
     	def detailTiles = ["mainTile"]

devicetypes/smartthings/aeon-illuminator-module.src/aeon-illuminator-module.groovy

@@ -47,9 +47,9 @@ metadata {
 
 	tiles {
 		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-			state "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#00A0DC", nextState:"turningOff"
+			state "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
 			state "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
-			state "turningOn", label:'${name}', icon:"st.switches.switch.on", backgroundColor:"#00A0DC"
+			state "turningOn", label:'${name}', icon:"st.switches.switch.on", backgroundColor:"#79b821"
 			state "turningOff", label:'${name}', icon:"st.switches.switch.off", backgroundColor:"#ffffff"
 		}
 		controlTile("levelSliderControl", "device.level", "slider", height: 2, width: 1, inactiveLabel: false) {

devicetypes/smartthings/aeon-key-fob.src/.st-ignore

@@ -1,2 +0,0 @@
-.st-ignore
-README.md

devicetypes/smartthings/aeon-key-fob.src/README.md

@@ -1,34 +0,0 @@
-# Aeon Labs Key Fob
-
-Cloud Execution
-
-Works with:
-
-* [Aeon Labs Key Fob](http://aeotec.com/z-wave-key-fob-remote-control)
-
-## Table of contents
-
-* [Capabilities](#capabilities)
-* [Health](#device-health)
-* [Troubleshooting](#troubleshooting)
-
-## Capabilities
-
-* **Actuator** - represents device has commands
-* **Button** - represents a device with one or more buttons
-* **Holdable Button** - represents a device with one or more holdable buttons
-* **Configuration** - allows for configuration of devices
-* **Sensor** - detects sensor events
-* **Battery** - defines device uses a battery
-* **Health Check** - indicates ability to get device health notifications
-
-## Device Health
-
-Aeon Key Fob is a ZWave totally sleepy device and is marked offline only in the case when Hub is offline.
-
-## Troubleshooting
-
-If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the sensor is out of range.
-Pairing needs to be tried again by placing the sensor closer to the hub.
-Instructions related to pairing, resetting and removing the Aeon Labs Key Fob from SmartThings can be found in the following link:
-* [Aeotec Key Fob Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/202294120-Aeon-Labs-Key-Fob)

devicetypes/smartthings/aeon-key-fob.src/aeon-key-fob.groovy

@@ -1,4 +1,3 @@
-import groovy.json.JsonOutput
 /**
  *  Copyright 2015 SmartThings
  *
@@ -16,14 +15,11 @@ metadata {
 	definition (name: "Aeon Key Fob", namespace: "smartthings", author: "SmartThings") {
 		capability "Actuator"
 		capability "Button"
-		capability "Holdable Button"
 		capability "Configuration"
 		capability "Sensor"
 		capability "Battery"
-		capability "Health Check"
 
 		fingerprint deviceId: "0x0101", inClusters: "0x86,0x72,0x70,0x80,0x84,0x85"
-		fingerprint mfr: "0086", prod: "0001", model: "0026", deviceJoinName: "Aeon Panic Button"
 	}
 
 	simulator {
@@ -40,14 +36,14 @@ metadata {
 	tiles {
 		standardTile("button", "device.button", width: 2, height: 2) {
 			state "default", label: "", icon: "st.unknown.zwave.remote-controller", backgroundColor: "#ffffff"
-			state "button 1 pushed", label: "pushed #1", icon: "st.unknown.zwave.remote-controller", backgroundColor: "#00A0DC"
+			state "button 1 pushed", label: "pushed #1", icon: "st.unknown.zwave.remote-controller", backgroundColor: "#79b821"
-			state "button 2 pushed", label: "pushed #2", icon: "st.unknown.zwave.remote-controller", backgroundColor: "#00A0DC"
+			state "button 2 pushed", label: "pushed #2", icon: "st.unknown.zwave.remote-controller", backgroundColor: "#79b821"
-			state "button 3 pushed", label: "pushed #3", icon: "st.unknown.zwave.remote-controller", backgroundColor: "#00A0DC"
+			state "button 3 pushed", label: "pushed #3", icon: "st.unknown.zwave.remote-controller", backgroundColor: "#79b821"
-			state "button 4 pushed", label: "pushed #4", icon: "st.unknown.zwave.remote-controller", backgroundColor: "#00A0DC"
+			state "button 4 pushed", label: "pushed #4", icon: "st.unknown.zwave.remote-controller", backgroundColor: "#79b821"
-			state "button 1 held", label: "held #1", icon: "st.unknown.zwave.remote-controller", backgroundColor: "#e86d13"
+			state "button 1 held", label: "held #1", icon: "st.unknown.zwave.remote-controller", backgroundColor: "#ffa81e"
-			state "button 2 held", label: "held #2", icon: "st.unknown.zwave.remote-controller", backgroundColor: "#e86d13"
+			state "button 2 held", label: "held #2", icon: "st.unknown.zwave.remote-controller", backgroundColor: "#ffa81e"
-			state "button 3 held", label: "held #3", icon: "st.unknown.zwave.remote-controller", backgroundColor: "#e86d13"
+			state "button 3 held", label: "held #3", icon: "st.unknown.zwave.remote-controller", backgroundColor: "#ffa81e"
-			state "button 4 held", label: "held #4", icon: "st.unknown.zwave.remote-controller", backgroundColor: "#e86d13"
+			state "button 4 held", label: "held #4", icon: "st.unknown.zwave.remote-controller", backgroundColor: "#ffa81e"
 		}
 		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat") {
 			state "battery", label:'${currentValue}% battery', unit:""
@@ -122,26 +118,3 @@ def configure() {
 	log.debug("Sending configuration: $cmd")
 	return cmd
 }
-
-
-def installed() {
-	initialize()
-}
-
-def updated() {
-	initialize()
-}
-
-def initialize() {
-	// Device only goes OFFLINE when Hub is off
-	sendEvent(name: "DeviceWatch-Enroll", value: JsonOutput.toJson([protocol: "zwave", scheme:"untracked"]), displayed: false)
-
-	def zwMap = getZwaveInfo()
-	def buttons = 4 // Default for Key Fob
-
-	// Only one button for Aeon Panic Button
-	if (zwMap && zwMap.mfr == "0086" && zwMap.prod == "0001" && zwMap.model == "0026") {
-		buttons = 1
-	}
-	sendEvent(name: "numberOfButtons", value: buttons)
-}

devicetypes/smartthings/aeon-led-bulb.src/aeon-led-bulb.groovy

@@ -37,9 +37,9 @@ metadata {
 	}
 
 	standardTile("switch", "device.switch", width: 1, height: 1, canChangeIcon: true) {
-		state "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#00a0dc", nextState:"turningOff"
+		state "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
 		state "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-		state "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#00a0dc", nextState:"turningOff"
+		state "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
 		state "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
 	}
 	standardTile("reset", "device.reset", inactiveLabel: false, decoration: "flat") {

devicetypes/smartthings/aeon-minimote.src/.st-ignore

@@ -1,2 +0,0 @@
-.st-ignore
-README.md

devicetypes/smartthings/aeon-minimote.src/README.md

@@ -1,33 +0,0 @@
-# Aeon Minimote
-
-Cloud Execution
-
-Works with: 
-
-* [Aeotec Minimote](http://aeotec.com/small-z-wave-remote-control)
-
-## Table of contents
-
-* [Capabilities](#capabilities)
-* [Health](#device-health)
-* [Troubleshooting](#troubleshooting)
-
-## Capabilities
-
-* **Actuator** - represents device has commands
-* **Button** - represents a device with one or more buttons
-* **Holdable Button** - represents a device with one or more holdable buttons
-* **Configuration** - allows for configuration of devices
-* **Sensor** - detects sensor events
-* **Health Check** - indicates ability to get device health notifications
-
-## Device Health
-
-Aeon Minimote is a ZWave totally sleepy device and is marked offline only in the case when Hub is offline.
-
-## Troubleshooting
-
-If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the sensor is out of range.
-Pairing needs to be tried again by placing the sensor closer to the hub.
-Instructions related to pairing, resetting and removing the Aeotec Minimote from SmartThings can be found in the following link:
-* [Aeotec Minimote Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/202087904-Aeotec-Minimote)

devicetypes/smartthings/aeon-minimote.src/aeon-minimote.groovy

@@ -1,4 +1,3 @@
-import groovy.json.JsonOutput
 /**
  *  Copyright 2015 SmartThings
  *
@@ -16,10 +15,8 @@ metadata {
 	definition (name: "Aeon Minimote", namespace: "smartthings", author: "SmartThings") {
 		capability "Actuator"
 		capability "Button"
-		capability "Holdable Button"
 		capability "Configuration"
 		capability "Sensor"
-		capability "Health Check"
 
 		fingerprint deviceId: "0x0101", inClusters: "0x86,0x72,0x70,0x9B", outClusters: "0x26,0x2B"
 		fingerprint deviceId: "0x0101", inClusters: "0x86,0x72,0x70,0x9B,0x85,0x84", outClusters: "0x26" // old style with numbered buttons
@@ -110,17 +107,3 @@ def configure() {
 	log.debug("Sending configuration: $cmds")
 	return cmds
 }
-
-def installed() {
-	initialize()
-}
-
-def updated() {
-	initialize()
-}
-
-def initialize() {
-	// Device only goes OFFLINE when Hub is off
-	sendEvent(name: "DeviceWatch-Enroll", value: JsonOutput.toJson([protocol: "zwave", scheme:"untracked"]), displayed: false)
-	sendEvent(name: "numberOfButtons", value: 4)
-}

devicetypes/smartthings/aeon-multisensor-6.src/.st-ignore

@@ -1,2 +0,0 @@
-.st-ignore
-README.md

devicetypes/smartthings/aeon-multisensor-6.src/README.md

@@ -1,39 +0,0 @@
-# Aeon Multisensor 6
-
-Cloud Execution
-
-Works with: 
-
-* [Aeon Labs MultiSensor 6](https://www.smartthings.com/products/aeon-labs-multisensor-6)
-
-## Table of contents
-
-* [Capabilities](#capabilities)
-* [Health](#device-health)
-* [Troubleshooting](#troubleshooting)
-
-## Capabilities
-
-* **Motion Sensor** - can detect motion
-* **Temperature Measurement** - defines device measures current temperature
-* **Relative Humidity Measurement** - allow reading the relative humidity from devices that support it
-* **Illuminance Measurement** - gives the illuminance reading from devices that support it
-* **Ultraviolet Index** - gives the ability to get the ultraviolet index from devices that report it
-* **Configuration** - _configure()_ command called when device is installed or device preferences updated
-* **Sensor** - detects sensor events
-* **Battery** - defines device uses a battery
-* **Health Check** - indicates ability to get device health notifications
-
-## Device Health
-
-Aeon Labs MultiSensor 6 is polled by the hub.
-Aeon MultiSensor reports in once every hour.
-
-* __122min__ checkInterval
-
-## Troubleshooting
-
-If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
-Pairing needs to be tried again by placing the device closer to the hub.
-Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
-* [Aeon Labs MultiSensor 6 Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206157226)

devicetypes/smartthings/aeon-multisensor-6.src/aeon-multisensor-6.groovy

@@ -22,7 +22,6 @@ metadata {
 		capability "Configuration"
 		capability "Sensor"
 		capability "Battery"
-		capability "Health Check"
 
 		attribute "tamper", "enum", ["detected", "clear"]
 		attribute "batteryStatus", "string"
@@ -30,7 +29,6 @@ metadata {
 
 		fingerprint deviceId: "0x2101", inClusters: "0x5E,0x86,0x72,0x59,0x85,0x73,0x71,0x84,0x80,0x30,0x31,0x70,0x7A", outClusters: "0x5A"
 		fingerprint deviceId: "0x2101", inClusters: "0x5E,0x86,0x72,0x59,0x85,0x73,0x71,0x84,0x80,0x30,0x31,0x70,0x7A,0x5A"
-		fingerprint mfr:"0086", prod:"0102", model:"0064", deviceJoinName: "Aeon Labs MultiSensor 6"
 	}
 
 	simulator {
@@ -84,8 +82,8 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"motion", type: "generic", width: 6, height: 4){
 			tileAttribute ("device.motion", key: "PRIMARY_CONTROL") {
-				attributeState "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#00A0DC"
+				attributeState "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0"
-				attributeState "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#cccccc"
+				attributeState "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff"
 			}
 		}
 		valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
@@ -105,7 +103,7 @@ metadata {
 		}
 
 		valueTile("illuminance", "device.illuminance", inactiveLabel: false, width: 2, height: 2) {
-			state "illuminance", label:'${currentValue} lux', unit:""
+			state "illuminance", label:'${currentValue} ${unit}', unit:"lux"
 		}
 
 		valueTile("ultravioletIndex", "device.ultravioletIndex", inactiveLabel: false, width: 2, height: 2) {
@@ -129,14 +127,7 @@ metadata {
 	}
 }
 
-def installed(){
-// Device-Watch simply pings if no device events received for 122min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-}
-
 def updated() {
-// Device-Watch simply pings if no device events received for 122min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 	log.debug "Updated with settings: ${settings}"
 	log.debug "${device.displayName} is now ${device.latestValue("powerSupply")}"
 
@@ -335,13 +326,6 @@ def zwaveEvent(physicalgraph.zwave.Command cmd) {
 	createEvent(descriptionText: cmd.toString(), isStateChange: false)
 }
 
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-	secure(zwave.batteryV1.batteryGet())
-}
-
 def configure() {
 	// This sensor joins as a secure device if you double-click the button to include it
 	log.debug "${device.displayName} is configuring its settings"
@@ -426,4 +410,4 @@ private command(physicalgraph.zwave.Command cmd) {
 private commands(commands, delay=200) {
 	log.info "sending commands: ${commands}"
 	delayBetween(commands.collect{ command(it) }, delay)
-}
+}

devicetypes/smartthings/aeon-multisensor-gen5.src/.st-ignore

@@ -1,2 +0,0 @@
-.st-ignore
-README.md

devicetypes/smartthings/aeon-multisensor-gen5.src/README.md

@@ -1,39 +0,0 @@
-# Aeon Multisensor Gen5
-
-Cloud Execution
-
-Works with: 
-
-* [Aeon Labs MultiSensor (Gen 5)](https://www.smartthings.com/works-with-smartthings/sensors/aeon-labs-multisensor-gen-5)
-
-## Table of contents
-
-* [Capabilities](#capabilities)
-* [Health](#device-health)
-* [Troubleshooting](#troubleshooting)
-
-## Capabilities
-
-* **Motion Sensor** - can detect motion
-* **Temperature Measurement** - defines device measures current temperature
-* **Relative Humidity Measurement** - allow reading the relative humidity from devices that support it
-* **Illuminance Measurement** - gives the illuminance reading from devices that support it
-* **Configuration** - _configure()_ command called when device is installed or device preferences updated
-* **Sensor** - detects sensor events
-* **Battery** - defines device uses a battery
-* **Health Check** - indicates ability to get device health notifications
-
-
-## Device Health
-
-Aeon Labs MultiSensor (Gen 5) is polled by the hub.
-Aeon MultiSensor Gen5 reports in once every hour.
-
-* __122min__ checkInterval
-
-## Troubleshooting
-
-If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
-Pairing needs to be tried again by placing the device closer to the hub.
-Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
-* [Aeon Labs MultiSensor (Gen 5) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206157226-Aeon-Labs-MultiSensor-Gen-5-)

devicetypes/smartthings/aeon-multisensor-gen5.src/aeon-multisensor-gen5.groovy

@@ -20,10 +20,10 @@ metadata {
 		capability "Configuration"
 		capability "Sensor"
 		capability "Battery"
-		capability "Health Check"
+
+		command "configureAfterSecure"
 
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x86,0x72,0x59,0x85,0x73,0x71,0x84,0x80,0x30,0x31,0x70,0x98,0x7A", outClusters:"0x5A"
-		fingerprint mfr:"0086", prod:"0102", model:"004A", deviceJoinName: "Aeon Labs MultiSensor (Gen 5)"
 	}
 
 	simulator {
@@ -64,8 +64,8 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"motion", type: "generic", width: 6, height: 4){
 			tileAttribute ("device.motion", key: "PRIMARY_CONTROL") {
-				attributeState "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#00a0dc"
+				attributeState "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0"
-				attributeState "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#cccccc"
+				attributeState "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff"
 			}
 		}
 		valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
@@ -84,30 +84,20 @@ metadata {
 			state "humidity", label:'${currentValue}% humidity', unit:""
 		}
 		valueTile("illuminance", "device.illuminance", inactiveLabel: false, width: 2, height: 2) {
-			state "luminosity", label:'${currentValue} lux', unit:""
+			state "luminosity", label:'${currentValue} ${unit}', unit:"lux"
 		}
 		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
 			state "battery", label:'${currentValue}% battery', unit:""
 		}
-		standardTile("configure", "device.configure", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+        standardTile("configureAfterSecure", "device.configure", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "configure", label:'', action:"configure", icon:"st.secondary.configure"
+			state "configure", label:'', action:"configureAfterSecure", icon:"st.secondary.configure"
 		}
 
 		main(["motion", "temperature", "humidity", "illuminance"])
-		details(["motion", "temperature", "humidity", "illuminance", "battery", "configure"])
+		details(["motion", "temperature", "humidity", "illuminance", "battery", "configureAfterSecure"])
 	}
 }
 
-def installed(){
-// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-}
-
-def updated(){
-// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-}
-
 def parse(String description)
 {
 	def result = null
@@ -129,8 +119,8 @@ def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd)
 
 	if (!isConfigured()) {
 		// we're still in the process of configuring a newly joined device
-		log.debug("not sending wakeUpNoMoreInformation yet: late configure")
+		log.debug("not sending wakeUpNoMoreInformation yet")
-		result += response(configure())
+        result += response(configureAfterSecure())
 	} else {
 		result += response(zwave.wakeUpV1.wakeUpNoMoreInformation())
 	}
@@ -148,6 +138,11 @@ def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulat
 	}
 }
 
+def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityCommandsSupportedReport cmd) {
+    // log.debug "Received SecurityCommandsSupportedReport"
+	response(configureAfterSecure())
+}
+
 def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
 	def map = [ name: "battery", unit: "%" ]
 	if (cmd.batteryLevel == 0xFF) {
@@ -219,45 +214,39 @@ def zwaveEvent(physicalgraph.zwave.Command cmd) {
 	createEvent(descriptionText: cmd.toString(), isStateChange: false)
 }
 
-/**
+def configureAfterSecure() {
- * PING is used by Device-Watch in attempt to reach the Device
+    // log.debug "configureAfterSecure()"
- * */
+
-def ping() {
+    def request = [
-	secure(zwave.batteryV1.batteryGet())
+		// send temperature, humidity, and illuminance every 8 minutes
+		zwave.configurationV1.configurationSet(parameterNumber: 101, size: 4, scaledConfigurationValue: 128|64|32),
+		zwave.configurationV1.configurationSet(parameterNumber: 111, size: 4, scaledConfigurationValue: 8*60),
+
+		// send battery every 20 hours
+		zwave.configurationV1.configurationSet(parameterNumber: 102, size: 4, scaledConfigurationValue: 1),
+		zwave.configurationV1.configurationSet(parameterNumber: 112, size: 4, scaledConfigurationValue: 20*60*60),
+
+		// send no-motion report 60 seconds after motion stops
+		zwave.configurationV1.configurationSet(parameterNumber: 3, size: 2, scaledConfigurationValue: 60),
+
+		// send binary sensor report instead of basic set for motion
+		zwave.configurationV1.configurationSet(parameterNumber: 5, size: 1, scaledConfigurationValue: 2),
+
+		// disable notification-style motion events
+		zwave.notificationV3.notificationSet(notificationType: 7, notificationStatus: 0),
+
+		zwave.batteryV1.batteryGet(),
+		zwave.sensorBinaryV2.sensorBinaryGet(sensorType:0x0C)
+    ]
+	
+    setConfigured()
+	
+    secureSequence(request) + ["delay 20000", zwave.wakeUpV1.wakeUpNoMoreInformation().format()]
 }
 
 def configure() {
 	// log.debug "configure()"
-	def request = []
+    //["delay 30000"] + secure(zwave.securityV1.securityCommandsSupportedGet())
-	// send temperature, humidity, and illuminance every 8 minutes
-	request << zwave.configurationV1.configurationSet(parameterNumber: 101, size: 4, scaledConfigurationValue: 128|64|32)
-	request << zwave.configurationV1.configurationSet(parameterNumber: 111, size: 4, scaledConfigurationValue: 8*60)
-
-	// send battery every 20 hours
-	request << zwave.configurationV1.configurationSet(parameterNumber: 102, size: 4, scaledConfigurationValue: 1)
-	request << zwave.configurationV1.configurationSet(parameterNumber: 112, size: 4, scaledConfigurationValue: 20*60*60)
-
-	// send no-motion report 60 seconds after motion stops
-	request << zwave.configurationV1.configurationSet(parameterNumber: 3, size: 2, scaledConfigurationValue: 60)
-
-	// send binary sensor report instead of basic set for motion
-	request << zwave.configurationV1.configurationSet(parameterNumber: 5, size: 1, scaledConfigurationValue: 2)
-
-	// Turn on the Multisensor Gen5 PIR sensor
-	request << zwave.configurationV1.configurationSet(parameterNumber: 4, size: 1, scaledConfigurationValue: 1)
-
-	// disable notification-style motion events
-	request << zwave.notificationV3.notificationSet(notificationType: 7, notificationStatus: 0)
-
-	request << zwave.batteryV1.batteryGet()
-	request << zwave.sensorBinaryV2.sensorBinaryGet(sensorType: 0x0C) //motion
-	request << zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 0x01) //temperature
-	request << zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 0x03) //illuminance
-	request << zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType: 0x05) //humidity
-
-	setConfigured()
-
-	secureSequence(request) + ["delay 20000", zwave.wakeUpV1.wakeUpNoMoreInformation().format()]
 }
 
 private setConfigured() {
@@ -274,4 +263,5 @@ private secure(physicalgraph.zwave.Command cmd) {
 
 private secureSequence(commands, delay=200) {
 	delayBetween(commands.collect{ secure(it) }, delay)
-}
+}
+

devicetypes/smartthings/aeon-multisensor.src/.st-ignore

@@ -1,2 +0,0 @@
-.st-ignore
-README.md

devicetypes/smartthings/aeon-multisensor.src/README.md

@@ -1,44 +0,0 @@
-# Aeon Multisensor
-
-Cloud Execution
-
-Works with: 
-
-* [Aeotec MultiSensor (DSB05-ZWUS)](https://www.smartthings.com/products/aeotec-multisensor-5)
-
-## Table of contents
-
-* [Capabilities](#capabilities)
-* [Health](#device-health)
-* [Battery](#battery-specification)
-* [Troubleshooting](#troubleshooting)
-
-## Capabilities
-
-* **Motion Sensor** - can detect motion
-* **Temperature Measurement** - defines device measures current temperature
-* **Relative Humidity Measurement** - allow reading the relative humidity from devices that support it
-* **Illuminance Measurement** - gives the illuminance reading from devices that support it
-* **Configuration** - _configure()_ command called when device is installed or device preferences updated
-* **Sensor** - detects sensor events
-* **Battery** - defines device uses a battery
-* **Health Check** - indicates ability to get device health notifications
-
-
-## Device Health
-
-Aeon Labs MultiSensor is polled by the hub.
-Aeon MultiSensor reports in once every hour.
-
-* __122min__ checkInterval
-
-## Battery Specification
-
-Four AAA batteries are required.
-
-## Troubleshooting
-
-If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
-Pairing needs to be tried again by placing the device closer to the hub.
-Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
-* [Aeon MultiSensor Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/206157226-How-to-connect-Aeon-Labs-MultiSensors)

devicetypes/smartthings/aeon-multisensor.src/aeon-multisensor.groovy

@@ -20,7 +20,6 @@ metadata {
 		capability "Illuminance Measurement"
 		capability "Sensor"
 		capability "Battery"
-		capability "Health Check"
 
 		fingerprint deviceId: "0x2001", inClusters: "0x30,0x31,0x80,0x84,0x70,0x85,0x72,0x86"
 	}
@@ -60,8 +59,8 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"motion", type: "generic", width: 6, height: 4){
 			tileAttribute ("device.motion", key: "PRIMARY_CONTROL") {
-				attributeState "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#00a0dc"
+				attributeState "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0"
-				attributeState "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#cccccc"
+				attributeState "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff"
 			}
 		}
 		valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
@@ -80,7 +79,7 @@ metadata {
 			state "humidity", label:'${currentValue}% humidity', unit:""
 		}
 		valueTile("illuminance", "device.illuminance", inactiveLabel: false, width: 2, height: 2) {
-			state "luminosity", label:'${currentValue} lux', unit:""
+			state "luminosity", label:'${currentValue} ${unit}', unit:"lux"
 		}
 		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
 			state "battery", label:'${currentValue}% battery', unit:""
@@ -94,16 +93,6 @@ metadata {
 	}
 }
 
-def installed(){
-// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-}
-
-def updated(){
-// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-}
-
 // Parse incoming device messages to generate events
 def parse(String description)
 {
@@ -190,13 +179,6 @@ def zwaveEvent(physicalgraph.zwave.Command cmd) {
 	[:]
 }
 
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-	secure(zwave.batteryV1.batteryGet())
-}
-
 def configure() {
 	delayBetween([
 		// send binary sensor report instead of basic set for motion
@@ -211,4 +193,4 @@ def configure() {
 		// set data reporting period to 5 minutes
 		zwave.configurationV1.configurationSet(parameterNumber: 111, size: 4, scaledConfigurationValue: 300).format()
 	])
-}
+}

devicetypes/smartthings/aeon-outlet.src/aeon-outlet.groovy

@@ -45,7 +45,7 @@ metadata {
 	// tile definitions
 	tiles {
 		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-			state "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#00a0dc"
+			state "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821"
 			state "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff"
 		}
 		valueTile("energy", "device.energy", decoration: "flat") {

devicetypes/smartthings/aeon-secure-smart-energy-switch-uk.src/aeon-secure-smart-energy-switch-uk.groovy

@@ -53,7 +53,7 @@ metadata {
 	// tile definitions
 	tiles {
 		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-			state "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#00A0DC"
+			state "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821"
 			state "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff"
 		}
 		valueTile("power", "device.power", decoration: "flat") {

devicetypes/smartthings/aeon-siren.src/.st-ignore

@@ -1,2 +0,0 @@
-.st-ignore
-README.md

devicetypes/smartthings/aeon-siren.src/README.md

@@ -1,37 +0,0 @@
-# Aeon Siren
-
-Cloud Execution
-
-Works with: 
-
-* [Aeon Labs Siren (Gen 5)](https://www.smartthings.com/works-with-smartthings/aeon-labs/aeon-labs-siren-gen-5)
-
-## Table of contents
-
-* [Capabilities](#capabilities)
-* [Health](#device-health)
-
-## Capabilities
-
-* **Actuator** - represents that a Device has commands
-* **Alarm** - allows for interacting with devices that serve as alarms
-* **Switch** - can detect state (possible values: on/off)
-* **Health Check** - indicates ability to get device health notifications
-
-## Device Health
-
-Aeon Labs Siren (Gen 5) is polled by the hub.
-As of hubCore version 0.14.38 the hub sends up reports every 15 minutes regardless of whether the state changed.
-Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*15 + 2)mins = 32 mins.
-Not to mention after going OFFLINE when the device is plugged back in, it might take a considerable amount of time for
-the device to appear as ONLINE again. This is because if this listening device does not respond to two poll requests in a row,
-it is not polled for 5 minutes by the hub. This can delay up the process of being marked ONLINE by quite some time.
-
-* __32min__ checkInterval
-
-## Troubleshooting
-
-If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
-Pairing needs to be tried again by placing the device closer to the hub.
-Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
-* [Aeon Labs Siren (Gen 5) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/204555240-Aeon-Labs-Siren-Gen-5-)

devicetypes/smartthings/aeon-siren.src/aeon-siren.groovy

@@ -16,15 +16,14 @@
  *	Date: 2014-07-15
  */
 metadata {
- definition (name: "Aeon Siren", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "x.com.st.d.sensor.smoke") {
+ definition (name: "Aeon Siren", namespace: "smartthings", author: "SmartThings") {
 	capability "Actuator"
 	capability "Alarm"
 	capability "Switch"
-	capability "Health Check"
 
 	command "test"
 
-	fingerprint deviceId: "0x1005", inClusters: "0x5E,0x98", deviceJoinName: "Aeon Labs Siren (Gen 5)"
+	fingerprint deviceId: "0x1005", inClusters: "0x5E,0x98"
  }
 
  simulator {
@@ -58,17 +57,7 @@ metadata {
  }
 }
 
-def installed() {
-// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-
-	response(secure(zwave.basicV1.basicGet()))
-}
-
 def updated() {
-// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-
 	if(!state.sound) state.sound = 1
 	if(!state.volume) state.volume = 3
 
@@ -159,10 +148,3 @@ def test() {
 private secure(physicalgraph.zwave.Command cmd) {
 	zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
 }
-
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-	secure(zwave.basicV1.basicGet())
-}

devicetypes/smartthings/aeon-smartstrip.src/aeon-smartstrip.groovy

@@ -60,7 +60,7 @@ metadata {
 	// tile definitions
 	tiles {
 		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-			state "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#00a0dc"
+			state "on", label: '${name}', action: "switch.off", icon: "st.switches.switch.on", backgroundColor: "#79b821"
 			state "off", label: '${name}', action: "switch.on", icon: "st.switches.switch.off", backgroundColor: "#ffffff"
 		}
 		valueTile("power", "device.power", decoration: "flat") {
@@ -78,7 +78,7 @@ metadata {
 
 		(1..4).each { n ->
 			standardTile("switch$n", "switch$n", canChangeIcon: true) {
-				state "on", label: '${name}', action: "off$n", icon: "st.switches.switch.on", backgroundColor: "#00a0dc"
+				state "on", label: '${name}', action: "off$n", icon: "st.switches.switch.on", backgroundColor: "#79b821"
 				state "off", label: '${name}', action: "on$n", icon: "st.switches.switch.off", backgroundColor: "#ffffff"
 			}
 			valueTile("power$n", "power$n", decoration: "flat") {

devicetypes/smartthings/arrival-sensor-ha.src/.st-ignore

@@ -1,2 +0,0 @@
-.st-ignore
-README.md

devicetypes/smartthings/arrival-sensor-ha.src/README.md

@@ -1,50 +0,0 @@
-# Arrival Sensor HA (2016+ Model)
-
-Cloud Execution
-
-Works with:
-
-* [Samsung SmartThings Arrival Sensor](https://support.smartthings.com/hc/en-us/articles/212417083-Samsung-SmartThings-Arrival-Sensor)
-
-## Table of contents
-
-* [Capabilities](#capabilities)
-* [Health](#device-health)
-* [Battery](#battery)
-* [Troubleshooting](#troubleshooting)
-
-
-## Capabilities
-
-* **Tone** - beep command to allow an audible tone
-* **Actuator** - device has commands
-* **Presence Sensor** - device tells presence with enum - {present, not present}
-* **Sensor** - device has attributes
-* **Battery** - defines device uses a battery
-* **Configuration** - _configure()_ command called when device is installed or device preferences updated
-* **Health Check** - indicates ability to get device health notifications
-
-
-## Device Health
-
-Arrival Sensor ZigBee is an untracked device. Sends broadcast of battery level every 20 seconds.
-Disconnects when Hub goes OFFLINE.
-
-
-## Battery
-
-Uses 1 CR2032 Battery
-
-* [Changing the Battery](https://support.smartthings.com/hc/en-us/articles/200907400-How-to-change-the-battery-in-the-SmartSense-Presence-Sensor-and-Samsung-SmartThings-Arrival-Sensor)
-
-
-## Troubleshooting
-
-If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the arrival sensor is out of range.
-Pairing needs to be tried again by placing the sensor closer to the hub.
-
-* [Samsung SmartThings Arrival Sensor Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/205382134-Samsung-SmartThings-Arrival-Sensor-2015-model-)
-
-If the arrival sensor doesn't update its status, here are a few things you can try to debug.
-
-* [Troubleshooting: Samsung SmartThings Arrival Sensor won't update its status](https://support.smartthings.com/hc/en-us/articles/200846514-Troubleshooting-Samsung-SmartThings-Arrival-Sensor-won-t-update-its-status)

devicetypes/smartthings/arrival-sensor-ha.src/arrival-sensor-ha.groovy

@@ -1,7 +1,5 @@
-import groovy.json.JsonOutput
-
 /**
- *  Copyright 2017 SmartThings
+ *  Copyright 2016 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -13,6 +11,7 @@ import groovy.json.JsonOutput
  *  for the specific language governing permissions and limitations under the License.
  *
  */
+ 
 metadata {
     definition (name: "Arrival Sensor HA", namespace: "smartthings", author: "SmartThings") {
         capability "Tone"
@@ -21,7 +20,6 @@ metadata {
         capability "Sensor"
         capability "Battery"
         capability "Configuration"
-        capability "Health Check"
 
         fingerprint inClusters: "0000,0001,0003,000F,0020", outClusters: "0003,0019",
                         manufacturer: "SmartThings", model: "tagv4", deviceJoinName: "Arrival Sensor"
@@ -42,7 +40,7 @@ metadata {
 
     tiles {
         standardTile("presence", "device.presence", width: 2, height: 2, canChangeBackground: true) {
-            state "present", labelIcon:"st.presence.tile.present", backgroundColor:"#00a0dc"
+            state "present", labelIcon:"st.presence.tile.present", backgroundColor:"#53a7c0"
             state "not present", labelIcon:"st.presence.tile.not-present", backgroundColor:"#ffffff"
         }
         standardTile("beep", "device.beep", decoration: "flat") {
@@ -61,13 +59,8 @@ def updated() {
     startTimer()
 }
 
-def installed() {
-    // Arrival sensors only goes OFFLINE when Hub is off
-    sendEvent(name: "DeviceWatch-Enroll", value: JsonOutput.toJson([protocol: "zigbee", scheme:"untracked"]), displayed: false)
-}
-
 def configure() {
-    def cmds = zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x0020) + zigbee.batteryConfig(20, 20, 0x01)
+    def cmds = zigbee.configureReporting(0x0001, 0x0020, 0x20, 20, 20, 0x01)
     log.debug "configure -- cmds: ${cmds}"
     return cmds
 }
@@ -159,7 +152,7 @@ private handlePresenceEvent(present) {
 
 private startTimer() {
     log.debug "Scheduling periodic timer"
-    runEvery1Minute("checkPresenceCallback")
+    schedule("0 * * * * ?", checkPresenceCallback)
 }
 
 private stopTimer() {
@@ -174,4 +167,4 @@ def checkPresenceCallback() {
     if (timeSinceLastCheckin >= theCheckInterval) {
         handlePresenceEvent(false)
     }
-}
+}

devicetypes/smartthings/arrival-sensor.src/.st-ignore

@@ -1,2 +0,0 @@
-.st-ignore
-README.md

devicetypes/smartthings/arrival-sensor.src/README.md

@@ -1,49 +0,0 @@
-# Arrival Sensor (2015 Model)
-
-Cloud Execution
-
-Works with:
-
-* [Arrival Sensor](https://www.smartthings.com/products/samsung-smartthings-arrival-sensor)
-
-## Table of contents
-
-* [Capabilities](#capabilities)
-* [Health](#device-health)
-* [Battery](#battery)
-* [Troubleshooting](#troubleshooting)
-
-
-## Capabilities
-
-* **Tone** - beep command to allow an audible tone
-* **Actuator** - device has commands
-* **Signal Strength** - device can read the strength of signal- lqi: Link Quality Indication, rssi: Received Signal Strength Indication
-* **Presence Sensor** - device tells presence with enum - {present, not present}
-* **Sensor** - device has attributes
-* **Battery** - defines device uses a battery
-* **Health Check** - indicates ability to get device health notifications
-
-
-## Device Health
-
-Arrival Sensor ZigBee is an untracked device. Disconnects when Hub goes OFFLINE.
-
-
-## Battery
-
-Uses 1 CR2032 Battery
-
-* [Changing the Battery](https://support.smartthings.com/hc/en-us/articles/200907400-How-to-change-the-battery-in-the-SmartSense-Presence-Sensor-and-Samsung-SmartThings-Arrival-Sensor)
-
-
-## Troubleshooting
-
-If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the arrival sensor is out of range.
-Pairing needs to be tried again by placing the sensor closer to the hub.
-
-* [Samsung SmartThings Arrival Sensor Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/205382134-Samsung-SmartThings-Arrival-Sensor-2015-model-)
-
-If the arrival sensor doesn't update its status, here are a few things you can try to debug.
-
-* [Troubleshooting: Samsung SmartThings Arrival Sensor won't update its status](https://support.smartthings.com/hc/en-us/articles/200846514-Troubleshooting-Samsung-SmartThings-Arrival-Sensor-won-t-update-its-status)

devicetypes/smartthings/arrival-sensor.src/arrival-sensor.groovy

@@ -1,5 +1,3 @@
-import groovy.json.JsonOutput
-
 /**
  *  Copyright 2015 SmartThings
  *
@@ -21,7 +19,6 @@ metadata {
 		capability "Presence Sensor"
 		capability "Sensor"
 		capability "Battery"
-		capability "Health Check"
 
 		fingerprint profileId: "FC01", deviceId: "019A"
 		fingerprint profileId: "FC01", deviceId: "0131", inClusters: "0000,0003", outClusters: "0003"
@@ -45,8 +42,8 @@ metadata {
 
 	tiles {
 		standardTile("presence", "device.presence", width: 2, height: 2, canChangeBackground: true) {
-			state "present", labelIcon:"st.presence.tile.present", backgroundColor:"#00a0dc"
+			state "present", labelIcon:"st.presence.tile.present", backgroundColor:"#53a7c0"
-			state "not present", labelIcon:"st.presence.tile.not-present", backgroundColor:"#ffffff"
+			state "not present", labelIcon:"st.presence.tile.not-present", backgroundColor:"#ebeef2"
 		}
 		standardTile("beep", "device.beep", decoration: "flat") {
 			state "beep", label:'', action:"tone.beep", icon:"st.secondary.beep", backgroundColor:"#ffffff"
@@ -114,11 +111,6 @@ def beep() {
 	]
 }
 
-def installed() {
-	// Arrival sensors only goes OFFLINE when Hub is off
-	sendEvent(name: "DeviceWatch-Enroll", value: JsonOutput.toJson([protocol: "zigbee", scheme:"untracked"]), displayed: false)
-}
-
 def parse(String description) {
 	def results
 	if (isBatteryMessage(description)) {

devicetypes/smartthings/bose-soundtouch.src/bose-soundtouch.groovy

@@ -1,5 +1,3 @@
-//DEPRECATED. INTEGRATION MOVED TO SUPER LAN CONNECT
-
 /**
  *  Bose SoundTouch
  *
@@ -29,9 +27,7 @@ metadata {
         capability "Switch"
         capability "Refresh"
         capability "Music Player"
-        capability "Health Check"
+        capability "Polling"
-        capability "Sensor"
-        capability "Actuator"
 
         /**
          * Define all commands, ie, if you have a custom action not
@@ -71,10 +67,10 @@ metadata {
     }
 
     standardTile("switch", "device.switch", width: 1, height: 1, canChangeIcon: true) {
-        state "on", label: '${name}', action: "forceOff", icon: "st.Electronics.electronics16", backgroundColor: "#00a0dc", nextState:"turningOff"
+        state "on", label: '${name}', action: "forceOff", icon: "st.Electronics.electronics16", backgroundColor: "#79b821", nextState:"turningOff"
         state "turningOff", label:'TURNING OFF', icon:"st.Electronics.electronics16", backgroundColor:"#ffffff"
         state "off", label: '${name}', action: "forceOn", icon: "st.Electronics.electronics16", backgroundColor: "#ffffff", nextState:"turningOn"
-        state "turningOn", label:'TURNING ON', icon:"st.Electronics.electronics16", backgroundColor:"#00a0dc"
+        state "turningOn", label:'TURNING ON', icon:"st.Electronics.electronics16", backgroundColor:"#79b821"
     }
     valueTile("1", "device.station1", decoration: "flat", canChangeIcon: false) {
         state "station1", label:'${currentValue}', action:"preset1"
@@ -240,33 +236,7 @@ def parse(String event) {
  * @return action(s) to take or null
  */
 def installed() {
-    // Notify health check about this device with timeout interval 12 minutes
+    onAction("refresh")
-    sendEvent(name: "checkInterval", value: 12 * 60, data: [protocol: "lan", hubHardwareId: device.hub.hardwareID], displayed: false)
-    startPoll()
-}
-
-/**
- * Called by health check if no events been generated in the last 12 minutes
- * If device doesn't respond it will be marked offline (not available)
- */
-def ping() {
-    TRACE("ping")
-    boseSendGetNowPlaying()
-}
-
-/**
- * Schedule a 2 minute poll of the device to refresh the
- * tiles so the user gets the correct information.
- */
-def startPoll() {
-    TRACE("startPoll")
-    unschedule()
-    // Schedule 2 minute polling of speaker status (song average length is 3-4 minutes)
-    def sec = Math.round(Math.floor(Math.random() * 60))
-    //def cron = "$sec 0/5 * * * ?" // every 5 min
-    def cron = "$sec 0/2 * * * ?" // every 2 min
-    log.debug "schedule('$cron', boseSendGetNowPlaying)"
-    schedule(cron, boseSendGetNowPlaying)
 }
 
 /**
@@ -346,6 +316,14 @@ def onAction(String user, data=null) {
     return actions
 }
 
+/**
+ * Called every so often (every 5 minutes actually) to refresh the
+ * tiles so the user gets the correct information.
+ */
+def poll() {
+    return boseRefreshNowPlaying()
+}
+
 /**
  * Joins this speaker into the everywhere zone
  */
@@ -859,10 +837,6 @@ def boseRefreshNowPlaying(delay=0) {
     return boseGET("/now_playing")
 }
 
-def boseSendGetNowPlaying() {
-    sendHubCommand(boseGET("/now_playing"))
-}
-
 /**
  * Requests the list of presets
  *
@@ -1040,8 +1014,4 @@ def boseGetDeviceID() {
  */
 def getDeviceIP() {
     return parent.resolveDNI2Address(device.deviceNetworkId)
-}
-
-def TRACE(text) {
-    log.trace "${text}"
 }

devicetypes/smartthings/centralite-dimmer.src/centralite-dimmer.groovy

@@ -0,0 +1,156 @@
+/**
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ *	CentraLite Dimmer
+ *
+ *	Author: SmartThings
+ *	Date: 2013-12-04
+ */
+//DEPRECATED - Using the generic DTH for this device. Users need to be moved before deleting this DTH
+metadata {
+	definition (name: "CentraLite Dimmer", namespace: "smartthings", author: "SmartThings") {
+		capability "Switch Level"
+		capability "Actuator"
+		capability "Switch"
+		capability "Power Meter"
+		capability "Configuration"
+		capability "Refresh"
+		capability "Sensor"
+
+	}
+
+	// simulator metadata
+	simulator {
+		// status messages
+		status "on": "on/off: 1"
+		status "off": "on/off: 0"
+
+		// reply messages
+		reply "zcl on-off on": "on/off: 1"
+		reply "zcl on-off off": "on/off: 0"
+	}
+
+	tiles(scale: 2) {
+		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+				attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
+				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
+			}
+			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+				attributeState "level", action:"switch level.setLevel"
+			}
+			tileAttribute ("power", key: "SECONDARY_CONTROL") {
+				attributeState "power", label:'${currentValue} W'
+			}
+		}
+		
+		standardTile("refresh", "device.power", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+		
+		main "switch"
+		details(["switch","refresh"])
+	}
+}
+
+// Parse incoming device messages to generate events
+def parse(String description) {
+	log.debug "Parse description $description"
+	def name = null
+	def value = null
+	if (description?.startsWith("catchall:")) {
+		def msg = zigbee.parse(description)
+		log.trace msg
+		log.trace "data: $msg.data"
+	} else if (description?.startsWith("read attr -")) {
+		def descMap = parseDescriptionAsMap(description)
+		log.debug "Read attr: $description"
+		if (descMap.cluster == "0006" && descMap.attrId == "0000") {
+			name = "switch"
+			value = descMap.value.endsWith("01") ? "on" : "off"
+		} else {
+			def reportValue = description.split(",").find {it.split(":")[0].trim() == "value"}?.split(":")[1].trim()
+			name = "power"
+			// assume 16 bit signed for encoding and power divisor is 10
+			value = Integer.parseInt(reportValue, 16) / 10
+		}
+	} else if (description?.startsWith("on/off:")) {
+		log.debug "Switch command"
+		name = "switch"
+		value = description?.endsWith(" 1") ? "on" : "off"
+	}
+
+	def result = createEvent(name: name, value: value)
+	log.debug "Parse returned ${result?.descriptionText}"
+	return result
+}
+
+def parseDescriptionAsMap(description) {
+	(description - "read attr - ").split(",").inject([:]) { map, param ->
+		def nameAndValue = param.split(":")
+		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
+	}
+}
+
+// Commands to device
+def on() {
+	[
+			'zcl on-off on',
+			'delay 200',
+			"send 0x${zigbee.deviceNetworkId} 0x01 0x${zigbee.endpointId}",
+			'delay 500'
+	]
+}
+
+def off() {
+	[
+			'zcl on-off off',
+			'delay 200',
+			"send 0x${zigbee.deviceNetworkId} 0x01 0x${zigbee.endpointId}",
+			'delay 500'
+	]
+}
+
+def setLevel(value) {
+	log.trace "setLevel($value)"
+	sendEvent(name: "level", value: value)
+    def level = hexString(Math.round(value * 255/100))
+	def cmd = "st cmd 0x${device.deviceNetworkId} 1 8 4 {${level} 2000}"
+	log.debug cmd
+	cmd
+}
+
+def meter() {
+	"st rattr 0x${device.deviceNetworkId} 1 0xB04 0x50B"
+}
+
+def refresh() {
+	"st rattr 0x${device.deviceNetworkId} 1 0xB04 0x50B"
+}
+
+def configure() {
+	[
+		"zdo bind 0x${device.deviceNetworkId} 1 1 8 {${device.zigbeeId}} {}", "delay 200",
+		"zdo bind 0x${device.deviceNetworkId} 1 1 6 {${device.zigbeeId}} {}", "delay 200",
+		"zdo bind 0x${device.deviceNetworkId} 1 1 0xB04 {${device.zigbeeId}} {}"
+	]
+}
+
+private hex(value, width=2) {
+    def s = new BigInteger(Math.round(value).toString()).toString(16)
+    while (s.size() < width) {
+        s = "0" + s
+    }
+    s
+}

devicetypes/smartthings/centralite-thermostat.src/centralite-thermostat.groovy

@@ -55,13 +55,13 @@ metadata {
 			state "fanOn", label:'${name}', action:"thermostat.setThermostatFanMode"
 		}
 		controlTile("heatSliderControl", "device.heatingSetpoint", "slider", height: 1, width: 2, inactiveLabel: false) {
-			state "setHeatingSetpoint", action:"thermostat.setHeatingSetpoint", backgroundColor:"#e86d13"
+			state "setHeatingSetpoint", action:"thermostat.setHeatingSetpoint", backgroundColor:"#d04e00"
 		}
 		valueTile("heatingSetpoint", "device.heatingSetpoint", inactiveLabel: false, decoration: "flat") {
 			state "heat", label:'${currentValue}° heat', unit:"F", backgroundColor:"#ffffff"
 		}
 		controlTile("coolSliderControl", "device.coolingSetpoint", "slider", height: 1, width: 2, inactiveLabel: false) {
-			state "setCoolingSetpoint", action:"thermostat.setCoolingSetpoint", backgroundColor: "#00a0dc"
+			state "setCoolingSetpoint", action:"thermostat.setCoolingSetpoint", backgroundColor: "#1e9cbb"
 		}
 		valueTile("coolingSetpoint", "device.coolingSetpoint", inactiveLabel: false, decoration: "flat") {
 			state "cool", label:'${currentValue}° cool', unit:"F", backgroundColor:"#ffffff"
@@ -81,47 +81,51 @@ metadata {
 // parse events into attributes
 def parse(String description) {
 	log.debug "Parse description $description"
-	List result = []
+	def map = [:]
-	def descMap = zigbee.parseDescriptionAsMap(description)
+	if (description?.startsWith("read attr -")) {
-	log.debug "Desc Map: $descMap"
+		def descMap = parseDescriptionAsMap(description)
-	List attrData = [[cluster: descMap.cluster ,attrId: descMap.attrId, value: descMap.value]]
+		log.debug "Desc Map: $descMap"
-	descMap.additionalAttrs.each {
+		if (descMap.cluster == "0201" && descMap.attrId == "0000") {
-	    attrData << [cluster: descMap.cluster, attrId: it.attrId, value: it.value]
-	}
-	attrData.each {
-		def map = [:]
-		if (it.cluster == "0201" && it.attrId == "0000") {
 			log.debug "TEMP"
 			map.name = "temperature"
-			map.value = getTemperature(it.value)
+			map.value = getTemperature(descMap.value)
 			map.unit = temperatureScale
-		} else if (it.cluster == "0201" && it.attrId == "0011") {
+		} else if (descMap.cluster == "0201" && descMap.attrId == "0011") {
 			log.debug "COOLING SETPOINT"
 			map.name = "coolingSetpoint"
-			map.value = getTemperature(it.value)
+			map.value = getTemperature(descMap.value)
 			map.unit = temperatureScale
-		} else if (it.cluster == "0201" && it.attrId == "0012") {
+		} else if (descMap.cluster == "0201" && descMap.attrId == "0012") {
 			log.debug "HEATING SETPOINT"
 			map.name = "heatingSetpoint"
-			map.value = getTemperature(it.value)
+			map.value = getTemperature(descMap.value)
 			map.unit = temperatureScale
-		} else if (it.cluster == "0201" && it.attrId == "001c") {
+		} else if (descMap.cluster == "0201" && descMap.attrId == "001c") {
 			log.debug "MODE"
 			map.name = "thermostatMode"
-			map.value = getModeMap()[it.value]
+			map.value = getModeMap()[descMap.value]
-		} else if (it.cluster == "0202" && it.attrId == "0000") {
+		} else if (descMap.cluster == "0202" && descMap.attrId == "0000") {
 			log.debug "FAN MODE"
 			map.name = "thermostatFanMode"
-			map.value = getFanModeMap()[it.value]
+			map.value = getFanModeMap()[descMap.value]
 		}
-		if (map) {
-			result << createEvent(map)
-		}
-		log.debug "Parse returned $map"
 	}
+
+	def result = null
+	if (map) {
+		result = createEvent(map)
+	}
+	log.debug "Parse returned $map"
 	return result
 }
 
+def parseDescriptionAsMap(description) {
+	(description - "read attr - ").split(",").inject([:]) { map, param ->
+		def nameAndValue = param.split(":")
+		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
+	}
+}
+
 def getModeMap() { [
 	"00":"off",
 	"03":"cool",

devicetypes/smartthings/cooper-rf9500.src/cooper-rf9500.groovy

@@ -16,7 +16,7 @@ metadata {
 		capability "Switch"
 		capability "Switch Level"
 		capability "Button"
-		capability "Actuator"
+        capability "Actuator"
 
 		//fingerprint deviceId: "0x1200", inClusters: "0x77 0x86 0x75 0x73 0x85 0x72 0xEF", outClusters: "0x26"
 	}
@@ -36,7 +36,7 @@ metadata {
 	tiles {
 		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
 			state "off", label: '${name}', action: "switch.on", icon: "st.Home.home30", backgroundColor: "#ffffff"
-			state "on", label: '${name}', action: "switch.off", icon: "st.Home.home30", backgroundColor: "#00a0dc"
+			state "on", label: '${name}', action: "switch.off", icon: "st.Home.home30", backgroundColor: "#79b821"
 		}
 		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
 			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
@@ -74,20 +74,20 @@ def off() {
 }
 
 def levelup() {
-	def curlevel = device.currentValue('level') as Integer
+	def curlevel = device.currentValue('level') as Integer 
 	if (curlevel <= 90)
-    	setLevel(curlevel + 10);
+    	setLevel(curlevel + 10);     
 }
 
 def leveldown() {
-	def curlevel = device.currentValue('level') as Integer
+	def curlevel = device.currentValue('level') as Integer 
 	if (curlevel >= 10)
-    	setLevel(curlevel - 10)
+    	setLevel(curlevel - 10)    
 }
 
 def setLevel(value) {
 	log.trace "setLevel($value)"
-	sendEvent(name: "level", value: value)
+	sendEvent(name: "level", value: value) 
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd) {
@@ -106,11 +106,11 @@ def zwaveEvent(physicalgraph.zwave.commands.switchmultilevelv1.SwitchMultilevelS
 	if (cmd.upDown == true) {
 		Integer buttonid = 2
         leveldown()
-		checkbuttonEvent(buttonid)
+		checkbuttonEvent(buttonid)		
     } else if (cmd.upDown == false) {
 		Integer buttonid = 3
         levelup()
-		checkbuttonEvent(buttonid)
+		checkbuttonEvent(buttonid)       
 	}
 }
 
@@ -140,12 +140,12 @@ def buttonEvent(button) {
     def result = []
 	if (button == 1) {
     	def mystate = device.currentValue('switch');
-        if (mystate == "on")
+        if (mystate == "on") 
             off()
         else
-            on()
+            on()   
     }
-    updateState("currentButton", "$button")
+    updateState("currentButton", "$button")   
         // update the device state, recording the button press
         result << createEvent(name: "button", value: "pushed", data: [buttonNumber: button], descriptionText: "$device.displayName button $button was pushed", isStateChange: true)
     result
@@ -182,16 +182,3 @@ def updateState(String name, String value) {
 	state[name] = value
 	device.updateDataValue(name, value)
 }
-
-
-def installed() {
-	initialize()
-}
-
-def updated() {
-	initialize()
-}
-
-def initialize() {
-	sendEvent(name: "numberOfButtons", value: 3)
-}

devicetypes/smartthings/cree-bulb.src/README.md

@@ -1,6 +1,6 @@
 # Connected Cree LED Bulb
 
-Cloud Execution
+
 
 Works with: 
 
@@ -23,10 +23,8 @@ Works with:
 
 ## Device Health
 
-Connected Cree LED Bulb with cloud polling it every __5min__
+A Category C6 Connected Cree LED Bulb with maxReportTime of 5 mins.
-SmartThings platform will ping the device after `checkInterval` seconds of inactivity in last attempt to reach the device before marking it `OFFLINE` 
+Check-in interval = 12 mins
-
-* __12min__ checkInterval
 
 ## Troubleshooting
 

devicetypes/smartthings/cree-bulb.src/cree-bulb.groovy

@@ -15,7 +15,7 @@
  */
 
 metadata {
-    definition (name: "Cree Bulb", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
+    definition (name: "Cree Bulb", namespace: "smartthings", author: "SmartThings") {
 
         capability "Actuator"
         capability "Configuration"
@@ -23,7 +23,6 @@ metadata {
         capability "Switch"
         capability "Switch Level"
         capability "Health Check"
-        capability "Light"
 
         fingerprint profileId: "C05E", inClusters: "0000,0003,0004,0005,0006,0008,1000", outClusters: "0000,0019"
     }
@@ -43,9 +42,9 @@ metadata {
     tiles(scale: 2) {
         multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
             tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-                attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#00A0DC", nextState:"turningOff"
+                attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
                 attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
-                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#00A0DC", nextState:"turningOff"
+                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
                 attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
             }
             tileAttribute ("device.level", key: "SLIDER_CONTROL") {
@@ -83,7 +82,7 @@ def on() {
 }
 
 def setLevel(value) {
-    zigbee.setLevel(value) + zigbee.onOffRefresh() + zigbee.levelRefresh()       //adding refresh because of ZLL bulb not conforming to send-me-a-report
+    zigbee.setLevel(value) + ["delay 500"] + zigbee.levelRefresh()         //adding refresh because of ZLL bulb not conforming to send-me-a-report
 }
 
 /**
@@ -106,7 +105,7 @@ def healthPoll() {
 def configure() {
     unschedule()
     runEvery5Minutes("healthPoll")
-    // Device-Watch allows 2 check-in misses from device + ping
+    // Device-Watch allows 2 check-in misses from device
     sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
     zigbee.onOffRefresh() + zigbee.levelRefresh()
 }

devicetypes/smartthings/danalock.src/danalock.groovy

@@ -33,10 +33,10 @@ metadata {
 
 	tiles {
 		standardTile("toggle", "device.lock", width: 2, height: 2) {
-			state "locked", label:'locked', action:"lock.unlock", icon:"st.locks.lock.locked", backgroundColor:"#00a0dc", nextState:"unlocking"
+			state "locked", label:'locked', action:"lock.unlock", icon:"st.locks.lock.locked", backgroundColor:"#79b821", nextState:"unlocking"
 			state "unlocked", label:'unlocked', action:"lock.lock", icon:"st.locks.lock.unlocked", backgroundColor:"#ffffff", nextState:"locking"
 			state "unknown", label:"unknown", action:"lock.lock", icon:"st.locks.lock.unknown", backgroundColor:"#ffffff", nextState:"locking"
-			state "locking", label:'locking', icon:"st.locks.lock.locked", backgroundColor:"#00a0dc"
+			state "locking", label:'locking', icon:"st.locks.lock.locked", backgroundColor:"#79b821"
 			state "unlocking", label:'unlocking', icon:"st.locks.lock.unlocked", backgroundColor:"#ffffff"
 		}
 		standardTile("lock", "device.lock", inactiveLabel: false, decoration: "flat") {

devicetypes/smartthings/dimmer-switch.src/.st-ignore

@@ -1,2 +0,0 @@
-.st-ignore
-README.md

devicetypes/smartthings/dimmer-switch.src/README.md

@@ -1,51 +0,0 @@
-# Z-wave Dimmer Switch
-
-Local Execution on V2 Hubs
-
-Works with:
-
-* [GE Z-Wave In-Wall Smart Dimmer (GE 12724)](http://products.z-wavealliance.org/products/1197)
-* [GE Z-Wave In-Wall Smart Dimmer (Toggle) (GE 12729)](http://products.z-wavealliance.org/products/1201)
-* [GE Z-Wave Plug-in Smart Dimmer (GE 12718)](http://products.z-wavealliance.org/products/1191)
-* [GE 1,000-Watt In-Wall Smart Dimmer Switch (GE 12725)](http://products.z-wavealliance.org/products/1198)
-* [GE In-Wall Smart Fan Control (GE 12730)](http://products.z-wavealliance.org/products/1202)
-
-## Table of contents
-
-* [Capabilities](#capabilities)
-* [Health](#device-health)
-* [Troubleshooting](#Troubleshooting)
-
-## Capabilities
-
-* **Switch Level** - it's defined to accept two parameters, the level and the rate of dimming
-* **Actuator** - represents that a Device has commands
-* **Indicator** - gives you the ability to set the indicator LED light on a Z-Wave switch
-* **Switch** - can detect state (possible values: on/off)
-* **Polling** - represents that poll() can be implemented for the device
-* **Refresh** - _refresh()_ command for status updates
-* **Sensor** - detects sensor events
-* **Health Check** - indicates ability to get device health notifications
-
-## Device Health
-
-Z-Wave Smart Dimmers (In-Wall, In-Wall(Toggle), Plug-In), 1000-watt In-Wall Smart Dimmer Switch and In-Wall Smart Fan Control are polled by the hub.
-As of hubCore version 0.14.38 the hub sends up reports every 15 minutes regardless of whether the state changed.
-Check-in interval = 32 mins.
-Not to mention after going OFFLINE when the device is plugged back in, it might take a considerable amount of time for
-the device to appear as ONLINE again. This is because if this listening device does not respond to two poll requests in a row,
-it is not polled for 5 minutes by the hub. This can delay up the process of being marked ONLINE by quite some time.
-
-* __32min__ checkInterval
-
-## Troubleshooting
-
-If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
-Pairing needs to be tried again by placing the device closer to the hub.
-Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
-* [General Z-Wave Dimmer/Switch Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/200955890-Troubleshooting-GE-in-wall-switch-or-dimmer-won-t-respond-to-commands-or-automations-Z-Wave-)
-* [GE Z-Wave In-Wall Smart Dimmer (GE 12724) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/200902600-GE-In-Wall-Paddle-Dimmer-Switch-GE-12724-Z-Wave-)
-* [GE Z-Wave In-Wall Smart Dimmer (Toggle) (GE 12729) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/207568463-GE-In-Wall-Smart-Toggle-Dimmer-GE-12729-Z-Wave-)
-* [GE Z-Wave Plug-in Smart Dimmer (GE 12718) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/202088474-GE-Plug-In-Smart-Dimmer-GE-12718-Z-Wave-)
-* [GE 1,000-Watt In-Wall Smart Dimmer Switch (GE 12725) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/200879274)
-* [GE In-Wall Smart Fan Control (GE 12730) Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/200879274)

devicetypes/smartthings/dimmer-switch.src/dimmer-switch.groovy

@@ -12,7 +12,7 @@
  *
  */
 metadata {
-	definition (name: "Dimmer Switch", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
+	definition (name: "Dimmer Switch", namespace: "smartthings", author: "SmartThings") {
 		capability "Switch Level"
 		capability "Actuator"
 		capability "Indicator"
@@ -20,13 +20,10 @@ metadata {
 		capability "Polling"
 		capability "Refresh"
 		capability "Sensor"
-		capability "Health Check"
-		capability "Light"
 
-		fingerprint mfr:"0063", prod:"4457", deviceJoinName: "GE In-Wall Smart Dimmer"
+		fingerprint mfr:"0063", prod:"4457", deviceJoinName: "Z-Wave Wall Dimmer"
-		fingerprint mfr:"0063", prod:"4944", deviceJoinName: "GE In-Wall Smart Dimmer"
+		fingerprint mfr:"0063", prod:"4944", deviceJoinName: "Z-Wave Wall Dimmer"
-		fingerprint mfr:"0063", prod:"5044", deviceJoinName: "GE Plug-In Smart Dimmer"
+		fingerprint mfr:"0063", prod:"5044", deviceJoinName: "Z-Wave Plug-In Dimmer"
-		fingerprint mfr:"0063", prod:"4944", model:"3034", deviceJoinName: "GE In-Wall Smart Fan Control"
 	}
 
 	simulator {
@@ -54,9 +51,9 @@ metadata {
 	tiles(scale: 2) {
 		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
 			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#00a0dc", nextState:"turningOff"
+				attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
 				attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
-				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#00a0dc", nextState:"turningOff"
+				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
 				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
 			}
 			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
@@ -84,14 +81,7 @@ metadata {
 	}
 }
 
-def installed() {
-	// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-}
-
 def updated(){
-	// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
   switch (ledIndicator) {
         case "on":
             indicatorWhenOn()
@@ -108,20 +98,11 @@ def updated(){
     }
 }
 
-def getCommandClassVersions() {
-	[
-		0x20: 1,  // Basic
-		0x26: 1,  // SwitchMultilevel
-		0x56: 1,  // Crc16Encap
-		0x70: 1,  // Configuration
-	]
-}
-
 def parse(String description) {
 	def result = null
 	if (description != "updated") {
 		log.debug "parse() >> zwave.parse($description)"
-		def cmd = zwave.parse(description, commandClassVersions)
+		def cmd = zwave.parse(description, [0x20: 1, 0x26: 1, 0x70: 1])
 		if (cmd) {
 			result = zwaveEvent(cmd)
 		}
@@ -188,16 +169,6 @@ def zwaveEvent(physicalgraph.zwave.commands.switchmultilevelv1.SwitchMultilevelS
 	[createEvent(name:"switch", value:"on"), response(zwave.switchMultilevelV1.switchMultilevelGet().format())]
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.crc16encapv1.Crc16Encap cmd) {
-	def versions = commandClassVersions
-	def version = versions[cmd.commandClass as Integer]
-	def ccObj = version ? zwave.commandClass(cmd.commandClass, version) : zwave.commandClass(cmd.commandClass)
-	def encapsulatedCommand = ccObj?.command(cmd.command)?.parse(cmd.data)
-	if (encapsulatedCommand) {
-		zwaveEvent(encapsulatedCommand)
-	}
-}
-
 def zwaveEvent(physicalgraph.zwave.Command cmd) {
 	// Handles all Z-Wave commands we aren't interested in
 	[:]
@@ -244,13 +215,6 @@ def poll() {
 	zwave.switchMultilevelV1.switchMultilevelGet().format()
 }
 
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-	refresh()
-}
-
 def refresh() {
 	log.debug "refresh() is called"
 	def commands = []
@@ -262,17 +226,17 @@ def refresh() {
 }
 
 void indicatorWhenOn() {
-	sendEvent(name: "indicatorStatus", value: "when on", displayed: false)
+	sendEvent(name: "indicatorStatus", value: "when on", display: false)
 	sendHubCommand(new physicalgraph.device.HubAction(zwave.configurationV1.configurationSet(configurationValue: [1], parameterNumber: 3, size: 1).format()))
 }
 
 void indicatorWhenOff() {
-	sendEvent(name: "indicatorStatus", value: "when off", displayed: false)
+	sendEvent(name: "indicatorStatus", value: "when off", display: false)
 	sendHubCommand(new physicalgraph.device.HubAction(zwave.configurationV1.configurationSet(configurationValue: [0], parameterNumber: 3, size: 1).format()))
 }
 
 void indicatorNever() {
-	sendEvent(name: "indicatorStatus", value: "never", displayed: false)
+	sendEvent(name: "indicatorStatus", value: "never", display: false)
 	sendHubCommand(new physicalgraph.device.HubAction(zwave.configurationV1.configurationSet(configurationValue: [2], parameterNumber: 3, size: 1).format()))
 }
 

devicetypes/smartthings/ecobee-sensor.src/ecobee-sensor.groovy

@@ -47,8 +47,8 @@ metadata {
 		}
 
 		standardTile("motion", "device.motion") {
-			state("inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#cccccc")
+			state("inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff")
-			state("active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#00A0DC")
+			state("active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0")
 		}
 
 		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat") {

devicetypes/smartthings/ecobee-thermostat.src/ecobee-thermostat.groovy

@@ -23,7 +23,6 @@ metadata {
 		capability "Sensor"
 		capability "Refresh"
 		capability "Relative Humidity Measurement"
-		capability "Health Check"
 
 		command "generateEvent"
 		command "raiseSetpoint"
@@ -32,19 +31,18 @@ metadata {
 		command "switchMode"
 		command "switchFanMode"
 
-		attribute "displayThermostatSetpoint", "string" // Added to be able to show "Auto"/"Off" keeping attribute thermostatSetpoint a number
+		attribute "thermostatSetpoint", "number"
 		attribute "thermostatStatus", "string"
 		attribute "maxHeatingSetpoint", "number"
 		attribute "minHeatingSetpoint", "number"
 		attribute "maxCoolingSetpoint", "number"
 		attribute "minCoolingSetpoint", "number"
 		attribute "deviceTemperatureUnit", "string"
-		attribute "deviceAlive", "enum", ["true", "false"]
 	}
 
 	tiles {
-		standardTile("temperature", "device.temperature", width: 2, height: 2, decoration: "flat") {
+		valueTile("temperature", "device.temperature", width: 2, height: 2) {
-			state("temperature", label:'${currentValue}°', unit:"F", icon: "st.thermostat.ac.air-conditioning",
+			state("temperature", label:'${currentValue}°', unit:"F",
 					backgroundColors:[
 							// Celsius
 							[value: 0, color: "#153591"],
@@ -70,7 +68,7 @@ metadata {
 			state "heat", action:"switchMode",  nextState: "updating", icon: "st.thermostat.heat"
 			state "cool", action:"switchMode",  nextState: "updating", icon: "st.thermostat.cool"
 			state "auto", action:"switchMode",  nextState: "updating", icon: "st.thermostat.auto"
-			state "auxheatonly", action:"switchMode", icon: "st.thermostat.emergency-heat"
+			state "auxHeatOnly", action:"switchMode", icon: "st.thermostat.emergency-heat"
 			state "updating", label:"Working", icon: "st.secondary.secondary"
 		}
 		standardTile("fanMode", "device.thermostatFanMode", inactiveLabel: false, decoration: "flat") {
@@ -81,8 +79,8 @@ metadata {
 		standardTile("upButtonControl", "device.thermostatSetpoint", inactiveLabel: false, decoration: "flat") {
 			state "setpoint", action:"raiseSetpoint", icon:"st.thermostat.thermostat-up"
 		}
-		valueTile("displayThermostatSetpoint", "device.displayThermostatSetpoint", width: 1, height: 1, decoration: "flat") {
+		valueTile("thermostatSetpoint", "device.thermostatSetpoint", width: 1, height: 1, decoration: "flat") {
-			state "displayThermostatSetpoint", label:'${currentValue}'
+			state "thermostatSetpoint", label:'${currentValue}'
 		}
 		valueTile("currentStatus", "device.thermostatStatus", height: 1, width: 2, decoration: "flat") {
 			state "thermostatStatus", label:'${currentValue}', backgroundColor:"#ffffff"
@@ -113,7 +111,7 @@ metadata {
 			state "humidity", label:'${currentValue}%'
 		}
 		main "temperature"
-		details(["temperature", "upButtonControl", "displayThermostatSetpoint", "currentStatus", "downButtonControl", "mode", "fanMode","humidity", "resumeProgram", "refresh"])
+		details(["temperature", "upButtonControl", "thermostatSetpoint", "currentStatus", "downButtonControl", "mode", "fanMode","humidity", "resumeProgram", "refresh"])
 	}
 
 	preferences {
@@ -122,21 +120,6 @@ metadata {
 
 }
 
-void installed() {
-    // The device refreshes every 5 minutes by default so if we miss 2 refreshes we can consider it offline
-    // Using 12 minutes because in testing, device health team found that there could be "jitter"
-    sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "cloud"], displayed: false)
-}
-
-// Device Watch will ping the device to proactively determine if the device has gone offline
-// If the device was online the last time we refreshed, trigger another refresh as part of the ping.
-def ping() {
-    def isAlive = device.currentValue("deviceAlive") == "true" ? true : false
-    if (isAlive) {
-        refresh()
-    }
-}
-
 // parse events into attributes
 def parse(String description) {
 	log.debug "Parsing '${description}'"
@@ -156,49 +139,40 @@ void poll() {
 def generateEvent(Map results) {
 	log.debug "parsing data $results"
 	if(results) {
+		results.each { name, value ->
 
 			def linkText = getLinkText(device)
-		def supportedThermostatModes = ["off"]
+			def isChange = false
-		def thermostatMode = null
+			def isDisplayed = true
-
-		results.each { name, value ->
 			def event = [name: name, linkText: linkText, descriptionText: getThermostatDescriptionText(name, value, linkText),
 						 handlerName: name]
 
 			if (name=="temperature" || name=="heatingSetpoint" || name=="coolingSetpoint" ) {
-				def sendValue =  location.temperatureScale == "C"? roundC(convertFtoC(value.toDouble())) : value.toInteger()
+				def sendValue = convertTemperatureIfNeeded(value.toDouble(), "F", 1) //API return temperature value in F
-				event << [value: sendValue, unit: temperatureScale]
+				sendValue =  location.temperatureScale == "C"? roundC(sendValue) : sendValue
+				isChange = isTemperatureStateChange(device, name, value.toString())
+				isDisplayed = isChange
+				event << [value: sendValue, unit: temperatureScale, isStateChange: isChange, displayed: isDisplayed]
 			}  else if (name=="maxCoolingSetpoint" || name=="minCoolingSetpoint" || name=="maxHeatingSetpoint" || name=="minHeatingSetpoint") {
-				def sendValue =  location.temperatureScale == "C"? roundC(convertFtoC(value.toDouble())) : value.toInteger()
+				def sendValue = convertTemperatureIfNeeded(value.toDouble(), "F", 1) //API return temperature value in F
+				sendValue =  location.temperatureScale == "C"? roundC(sendValue) : sendValue
 				event << [value: sendValue, unit: temperatureScale, displayed: false]
 			}  else if (name=="heatMode" || name=="coolMode" || name=="autoMode" || name=="auxHeatMode"){
-				if (value == true) {
+				isChange = isStateChange(device, name, value.toString())
-					supportedThermostatModes << ((name == "auxHeatMode") ? "auxheatonly" : name - "Mode")
+				event << [value: value.toString(), isStateChange: isChange, displayed: false]
-				}
-				return // as we don't want to send this event here, proceed to next name/value pair
 			}  else if (name=="thermostatFanMode"){
-				sendEvent(name: "supportedThermostatFanModes", value: fanModes(), displayed: false)
+				isChange = isStateChange(device, name, value.toString())
-				event << [value: value.toString(), data:[supportedThermostatFanModes: fanModes()]]
+				event << [value: value.toString(), isStateChange: isChange, displayed: false]
 			}  else if (name=="humidity") {
-				event << [value: value.toString(), displayed: false, unit: "%"]
+				isChange = isStateChange(device, name, value.toString())
-			} else if (name == "deviceAlive") {
+				event << [value: value.toString(), isStateChange: isChange, displayed: false, unit: "%"]
-				event['displayed'] = false
+			}  else {
-			} else if (name == "thermostatMode") {
+				isChange = isStateChange(device, name, value.toString())
-				thermostatMode = value.toLowerCase()
+				isDisplayed = isChange
-				return // as we don't want to send this event here, proceed to next name/value pair
+				event << [value: value.toString(), isStateChange: isChange, displayed: isDisplayed]
-			} else {
-				event << [value: value.toString()]
 			}
 			sendEvent(event)
 		}
-		if (state.supportedThermostatModes != supportedThermostatModes) {
-			state.supportedThermostatModes = supportedThermostatModes
-			sendEvent(name: "supportedThermostatModes", value: supportedThermostatModes, displayed: false)
-		}
-		if (thermostatMode) {
-			sendEvent(name: "thermostatMode", value: thermostatMode, data:[supportedThermostatModes:state.supportedThermostatModes], linkText: linkText,
-					descriptionText: getThermostatDescriptionText("thermostatMode", thermostatMode, linkText), handlerName: "thermostatMode")
-		}
 		generateSetpointEvent ()
 		generateStatusEvent ()
 	}
@@ -279,6 +253,7 @@ void setCoolingSetpoint(setpoint) {
 	def maxCoolingSetpoint = device.currentValue("maxCoolingSetpoint")
 	def minCoolingSetpoint = device.currentValue("minCoolingSetpoint")
 
+
 	if (coolingSetpoint > maxCoolingSetpoint) {
 		coolingSetpoint = maxCoolingSetpoint
 	} else if (coolingSetpoint < minCoolingSetpoint) {
@@ -308,6 +283,7 @@ void setCoolingSetpoint(setpoint) {
 }
 
 void resumeProgram() {
+
 	log.debug "resumeProgram() is called"
 	sendEvent("name":"thermostatStatus", "value":"resuming schedule", "description":statusText, displayed: false)
 	def deviceId = device.deviceNetworkId.split(/\./).last()
@@ -324,7 +300,15 @@ void resumeProgram() {
 }
 
 def modes() {
-	return state.supportedThermostatModes
+	if (state.modes) {
+		log.debug "Modes = ${state.modes}"
+		return state.modes
+	}
+	else {
+		state.modes = parent.availableModes(this)
+		log.debug "Modes = ${state.modes}"
+		return state.modes
+	}
 }
 
 def fanModes() {
@@ -370,6 +354,7 @@ def switchFanMode() {
 }
 
 def switchToFanMode(nextMode) {
+
 	log.debug "switching to fan mode: $nextMode"
 	def returnCommand
 
@@ -407,13 +392,11 @@ def setThermostatFanMode(String mode) {
 }
 
 def generateModeEvent(mode) {
-	sendEvent(name: "thermostatMode", value: mode, data:[supportedThermostatModes: state.supportedThermostatModes],
+	sendEvent(name: "thermostatMode", value: mode, descriptionText: "$device.displayName is in ${mode} mode", displayed: true)
-			descriptionText: "$device.displayName is in ${mode} mode")
 }
 
 def generateFanModeEvent(fanMode) {
-	sendEvent(name: "thermostatFanMode", value: fanMode, data:[supportedThermostatFanModes: fanModes()],
+	sendEvent(name: "thermostatFanMode", value: fanMode, descriptionText: "$device.displayName fan is in ${fanMode} mode", displayed: true)
-			descriptionText: "$device.displayName fan is in ${fanMode} mode")
 }
 
 def generateOperatingStateEvent(operatingState) {
@@ -449,14 +432,14 @@ def heat() {
 }
 
 def emergencyHeat() {
-	auxheatonly()
+	auxHeatOnly()
 }
 
-def auxheatonly() {
+def auxHeatOnly() {
-	log.debug "auxheatonly()"
+	log.debug "auxHeatOnly"
 	def deviceId = device.deviceNetworkId.split(/\./).last()
 	if (parent.setMode ("auxHeatOnly", deviceId))
-		generateModeEvent("auxheatonly")
+		generateModeEvent("auxHeatOnly")
 	else {
 		log.debug "Error setting new mode."
 		def currentMode = device.currentState("thermostatMode")?.value
@@ -537,62 +520,63 @@ def fanAuto() {
 }
 
 def generateSetpointEvent() {
+
 	log.debug "Generate SetPoint Event"
 
 	def mode = device.currentValue("thermostatMode")
+	log.debug "Current Mode = ${mode}"
 
 	def heatingSetpoint = device.currentValue("heatingSetpoint")
+	log.debug "Heating Setpoint = ${heatingSetpoint}"
+
 	def coolingSetpoint = device.currentValue("coolingSetpoint")
+	log.debug "Cooling Setpoint = ${coolingSetpoint}"
+
 	def maxHeatingSetpoint = device.currentValue("maxHeatingSetpoint")
 	def maxCoolingSetpoint = device.currentValue("maxCoolingSetpoint")
 	def minHeatingSetpoint = device.currentValue("minHeatingSetpoint")
 	def minCoolingSetpoint = device.currentValue("minCoolingSetpoint")
 
-	if(location.temperatureScale == "C") {
+	if(location.temperatureScale == "C")
-		maxHeatingSetpoint = maxHeatingSetpoint > 40 ? roundC(convertFtoC(maxHeatingSetpoint)) : roundC(maxHeatingSetpoint)
+	{
-		maxCoolingSetpoint = maxCoolingSetpoint > 40 ? roundC(convertFtoC(maxCoolingSetpoint)) : roundC(maxCoolingSetpoint)
+		maxHeatingSetpoint = roundC(maxHeatingSetpoint)
-		minHeatingSetpoint = minHeatingSetpoint > 40 ? roundC(convertFtoC(minHeatingSetpoint)) : roundC(minHeatingSetpoint)
+		maxCoolingSetpoint = roundC(maxCoolingSetpoint)
-		minCoolingSetpoint = minCoolingSetpoint > 40 ? roundC(convertFtoC(minCoolingSetpoint)) : roundC(minCoolingSetpoint)
+		minHeatingSetpoint = roundC(minHeatingSetpoint)
-		heatingSetpoint = heatingSetpoint > 40 ? roundC(convertFtoC(heatingSetpoint)) : roundC(heatingSetpoint)
+		minCoolingSetpoint = roundC(minCoolingSetpoint)
-		coolingSetpoint = coolingSetpoint > 40 ? roundC(convertFtoC(coolingSetpoint)) : roundC(coolingSetpoint)
+		heatingSetpoint = roundC(heatingSetpoint)
-	} else {
+		coolingSetpoint = roundC(coolingSetpoint)
-		maxHeatingSetpoint = maxHeatingSetpoint < 40 ? roundC(convertCtoF(maxHeatingSetpoint)) : maxHeatingSetpoint
-		maxCoolingSetpoint = maxCoolingSetpoint < 40 ? roundC(convertCtoF(maxCoolingSetpoint)) : maxCoolingSetpoint
-		minHeatingSetpoint = minHeatingSetpoint < 40 ? roundC(convertCtoF(minHeatingSetpoint)) : minHeatingSetpoint
-		minCoolingSetpoint = minCoolingSetpoint < 40 ? roundC(convertCtoF(minCoolingSetpoint)) : minCoolingSetpoint
-		heatingSetpoint = heatingSetpoint < 40 ? roundC(convertCtoF(heatingSetpoint)) : heatingSetpoint
-		coolingSetpoint = coolingSetpoint < 40 ? roundC(convertCtoF(coolingSetpoint)) : coolingSetpoint
 	}
 
-	log.debug "Current Mode = ${mode}"
-	log.debug "Heating Setpoint = ${heatingSetpoint}"
-	log.debug "Cooling Setpoint = ${coolingSetpoint}"
 
 	sendEvent("name":"maxHeatingSetpoint", "value":maxHeatingSetpoint, "unit":location.temperatureScale)
 	sendEvent("name":"maxCoolingSetpoint", "value":maxCoolingSetpoint, "unit":location.temperatureScale)
 	sendEvent("name":"minHeatingSetpoint", "value":minHeatingSetpoint, "unit":location.temperatureScale)
 	sendEvent("name":"minCoolingSetpoint", "value":minCoolingSetpoint, "unit":location.temperatureScale)
-	sendEvent("name":"heatingSetpoint", "value":heatingSetpoint, "unit":location.temperatureScale)
-	sendEvent("name":"coolingSetpoint", "value":coolingSetpoint, "unit":location.temperatureScale)
 
-	def averageSetpoint = roundC((heatingSetpoint + coolingSetpoint) / 2)
+
 	if (mode == "heat") {
+
 		sendEvent("name":"thermostatSetpoint", "value":heatingSetpoint, "unit":location.temperatureScale)
-		sendEvent("name":"displayThermostatSetpoint", "value":heatingSetpoint, "unit":location.temperatureScale, displayed: false)
+
 	}
 	else if (mode == "cool") {
+
 		sendEvent("name":"thermostatSetpoint", "value":coolingSetpoint, "unit":location.temperatureScale)
-		sendEvent("name":"displayThermostatSetpoint", "value":coolingSetpoint, "unit":location.temperatureScale, displayed: false)
+
 	} else if (mode == "auto") {
-		sendEvent("name":"thermostatSetpoint", "value":averageSetpoint, "unit":location.temperatureScale)
+
-		sendEvent("name":"displayThermostatSetpoint", "value":"Auto", displayed: false)
+		sendEvent("name":"thermostatSetpoint", "value":"Auto")
+
 	} else if (mode == "off") {
-		sendEvent("name":"thermostatSetpoint", "value":averageSetpoint, "unit":location.temperatureScale)
+
-		sendEvent("name":"displayThermostatSetpoint", "value":"Off", displayed: false)
+		sendEvent("name":"thermostatSetpoint", "value":"Off")
-	} else if (mode == "auxheatonly") {
+
+	} else if (mode == "auxHeatOnly") {
+
 		sendEvent("name":"thermostatSetpoint", "value":heatingSetpoint, "unit":location.temperatureScale)
-		sendEvent("name":"displayThermostatSetpoint", "value":heatingSetpoint, "unit":location.temperatureScale, displayed: false)
+
 	}
+
 }
 
 void raiseSetpoint() {
@@ -601,41 +585,30 @@ void raiseSetpoint() {
 	def maxHeatingSetpoint = device.currentValue("maxHeatingSetpoint")
 	def maxCoolingSetpoint = device.currentValue("maxCoolingSetpoint")
 
+
 	if (mode == "off" || mode == "auto") {
 		log.warn "this mode: $mode does not allow raiseSetpoint"
 	} else {
-
 		def heatingSetpoint = device.currentValue("heatingSetpoint")
 		def coolingSetpoint = device.currentValue("coolingSetpoint")
 		def thermostatSetpoint = device.currentValue("thermostatSetpoint")
-
-		if (location.temperatureScale == "C") {
-			maxHeatingSetpoint = maxHeatingSetpoint > 40 ? convertFtoC(maxHeatingSetpoint) : maxHeatingSetpoint
-			maxCoolingSetpoint = maxCoolingSetpoint > 40 ? convertFtoC(maxCoolingSetpoint) : maxCoolingSetpoint
-			heatingSetpoint = heatingSetpoint > 40 ? convertFtoC(heatingSetpoint) : heatingSetpoint
-			coolingSetpoint = coolingSetpoint > 40 ? convertFtoC(coolingSetpoint) : coolingSetpoint
-			thermostatSetpoint = thermostatSetpoint > 40 ? convertFtoC(thermostatSetpoint) : thermostatSetpoint
-		} else {
-			maxHeatingSetpoint = maxHeatingSetpoint < 40 ? convertCtoF(maxHeatingSetpoint) : maxHeatingSetpoint
-			maxCoolingSetpoint = maxCoolingSetpoint < 40 ? convertCtoF(maxCoolingSetpoint) : maxCoolingSetpoint
-			heatingSetpoint = heatingSetpoint < 40 ? convertCtoF(heatingSetpoint) : heatingSetpoint
-			coolingSetpoint = coolingSetpoint < 40 ? convertCtoF(coolingSetpoint) : coolingSetpoint
-			thermostatSetpoint = thermostatSetpoint < 40 ? convertCtoF(thermostatSetpoint) : thermostatSetpoint
-		}
-
 		log.debug "raiseSetpoint() mode = ${mode}, heatingSetpoint: ${heatingSetpoint}, coolingSetpoint:${coolingSetpoint}, thermostatSetpoint:${thermostatSetpoint}"
 
-		targetvalue = thermostatSetpoint ? thermostatSetpoint : 0
+		if (device.latestState('thermostatSetpoint')) {
+			targetvalue = device.latestState('thermostatSetpoint').value
+			targetvalue = location.temperatureScale == "F"? targetvalue.toInteger() : targetvalue.toDouble()
+		} else {
+			targetvalue = 0
+		}
 		targetvalue = location.temperatureScale == "F"? targetvalue + 1 : targetvalue + 0.5
 
-		if ((mode == "heat" || mode == "auxheatonly") && targetvalue > maxHeatingSetpoint) {
+		if ((mode == "heat" || mode == "auxHeatOnly") && targetvalue > maxHeatingSetpoint) {
 			targetvalue = maxHeatingSetpoint
 		} else if (mode == "cool" && targetvalue > maxCoolingSetpoint) {
 			targetvalue = maxCoolingSetpoint
 		}
 
 		sendEvent("name":"thermostatSetpoint", "value":targetvalue, "unit":location.temperatureScale, displayed: false)
-		sendEvent("name":"displayThermostatSetpoint", "value":targetvalue, "unit":location.temperatureScale, displayed: false)
 		log.info "In mode $mode raiseSetpoint() to $targetvalue"
 
 		runIn(3, "alterSetpoint", [data: [value:targetvalue], overwrite: true]) //when user click button this runIn will be overwrite
@@ -649,39 +622,29 @@ void lowerSetpoint() {
 	def minHeatingSetpoint = device.currentValue("minHeatingSetpoint")
 	def minCoolingSetpoint = device.currentValue("minCoolingSetpoint")
 
+
 	if (mode == "off" || mode == "auto") {
 		log.warn "this mode: $mode does not allow lowerSetpoint"
 	} else {
 		def heatingSetpoint = device.currentValue("heatingSetpoint")
 		def coolingSetpoint = device.currentValue("coolingSetpoint")
 		def thermostatSetpoint = device.currentValue("thermostatSetpoint")
-
-		if (location.temperatureScale == "C") {
-			minHeatingSetpoint = minHeatingSetpoint > 40 ? convertFtoC(minHeatingSetpoint) : minHeatingSetpoint
-			minCoolingSetpoint = minCoolingSetpoint > 40 ? convertFtoC(minCoolingSetpoint) : minCoolingSetpoint
-			heatingSetpoint = heatingSetpoint > 40 ? convertFtoC(heatingSetpoint) : heatingSetpoint
-			coolingSetpoint = coolingSetpoint > 40 ? convertFtoC(coolingSetpoint) : coolingSetpoint
-			thermostatSetpoint = thermostatSetpoint > 40 ? convertFtoC(thermostatSetpoint) : thermostatSetpoint
-		} else {
-			minHeatingSetpoint = minHeatingSetpoint < 40 ? convertCtoF(minHeatingSetpoint) : minHeatingSetpoint
-			minCoolingSetpoint = minCoolingSetpoint < 40 ? convertCtoF(minCoolingSetpoint) : minCoolingSetpoint
-			heatingSetpoint = heatingSetpoint < 40 ? convertCtoF(heatingSetpoint) : heatingSetpoint
-			coolingSetpoint = coolingSetpoint < 40 ? convertCtoF(coolingSetpoint) : coolingSetpoint
-			thermostatSetpoint = thermostatSetpoint < 40 ? convertCtoF(thermostatSetpoint) : thermostatSetpoint
-		}
 		log.debug "lowerSetpoint() mode = ${mode}, heatingSetpoint: ${heatingSetpoint}, coolingSetpoint:${coolingSetpoint}, thermostatSetpoint:${thermostatSetpoint}"
-
+		if (device.latestState('thermostatSetpoint')) {
-		targetvalue = thermostatSetpoint ? thermostatSetpoint : 0
+			targetvalue = device.latestState('thermostatSetpoint').value
+			targetvalue = location.temperatureScale == "F"? targetvalue.toInteger() : targetvalue.toDouble()
+		} else {
+			targetvalue = 0
+		}
 		targetvalue = location.temperatureScale == "F"? targetvalue - 1 : targetvalue - 0.5
 
-		if ((mode == "heat" || mode == "auxheatonly") && targetvalue < minHeatingSetpoint) {
+		if ((mode == "heat" || mode == "auxHeatOnly") && targetvalue < minHeatingSetpoint) {
 			targetvalue = minHeatingSetpoint
 		} else if (mode == "cool" && targetvalue < minCoolingSetpoint) {
 			targetvalue = minCoolingSetpoint
 		}
 
 		sendEvent("name":"thermostatSetpoint", "value":targetvalue, "unit":location.temperatureScale, displayed: false)
-		sendEvent("name":"displayThermostatSetpoint", "value":targetvalue, "unit":location.temperatureScale, displayed: false)
 		log.info "In mode $mode lowerSetpoint() to $targetvalue"
 
 		runIn(3, "alterSetpoint", [data: [value:targetvalue], overwrite: true]) //when user click button this runIn will be overwrite
@@ -690,6 +653,7 @@ void lowerSetpoint() {
 
 //called by raiseSetpoint() and lowerSetpoint()
 void alterSetpoint(temp) {
+
 	def mode = device.currentValue("thermostatMode")
 
 	if (mode == "off" || mode == "auto") {
@@ -702,20 +666,8 @@ void alterSetpoint(temp) {
 		def targetHeatingSetpoint
 		def targetCoolingSetpoint
 
-		def temperatureScaleHasChanged = false
-
-		if (location.temperatureScale == "C") {
-			if ( heatingSetpoint > 40.0 || coolingSetpoint > 40.0 ) {
-				temperatureScaleHasChanged = true
-			}
-		} else {
-			if ( heatingSetpoint < 40.0 || coolingSetpoint < 40.0 ) {
-				temperatureScaleHasChanged = true
-			}
-		}
-
 		//step1: check thermostatMode, enforce limits before sending request to cloud
-		if (mode == "heat" || mode == "auxheatonly"){
+		if (mode == "heat" || mode == "auxHeatOnly"){
 			if (temp.value > coolingSetpoint){
 				targetHeatingSetpoint = temp.value
 				targetCoolingSetpoint = temp.value
@@ -744,34 +696,29 @@ void alterSetpoint(temp) {
 
 		if (parent.setHold(heatingValue, coolingValue, deviceId, sendHoldType)) {
 			sendEvent("name": "thermostatSetpoint", "value": temp.value, displayed: false)
-			sendEvent("name": "displayThermostatSetpoint", "value": temp.value, displayed: false)
 			sendEvent("name": "heatingSetpoint", "value": targetHeatingSetpoint, "unit": location.temperatureScale)
 			sendEvent("name": "coolingSetpoint", "value": targetCoolingSetpoint, "unit": location.temperatureScale)
 			log.debug "alterSetpoint in mode $mode succeed change setpoint to= ${temp.value}"
 		} else {
 			log.error "Error alterSetpoint()"
-			if (mode == "heat" || mode == "auxheatonly"){
+			if (mode == "heat" || mode == "auxHeatOnly"){
 				sendEvent("name": "thermostatSetpoint", "value": heatingSetpoint.toString(), displayed: false)
-				sendEvent("name": "displayThermostatSetpoint", "value": heatingSetpoint.toString(), displayed: false)
 			} else if (mode == "cool") {
 				sendEvent("name": "thermostatSetpoint", "value": coolingSetpoint.toString(), displayed: false)
-				sendEvent("name": "displayThermostatSetpoint", "value": heatingSetpoint.toString(), displayed: false)
 			}
 		}
-
-		if ( temperatureScaleHasChanged )
-			generateSetpointEvent()
 		generateStatusEvent()
 	}
 }
 
 def generateStatusEvent() {
+
 	def mode = device.currentValue("thermostatMode")
 	def heatingSetpoint = device.currentValue("heatingSetpoint")
 	def coolingSetpoint = device.currentValue("coolingSetpoint")
 	def temperature = device.currentValue("temperature")
+
 	def statusText
-	def operatingState = "idle"
 
 	log.debug "Generate Status Event for Mode = ${mode}"
 	log.debug "Temperature = ${temperature}"
@@ -779,36 +726,39 @@ def generateStatusEvent() {
 	log.debug "Cooling set point = ${coolingSetpoint}"
 	log.debug "HVAC Mode = ${mode}"
 
-	if (mode == "heat" || mode == "auxheatonly") {
+	if (mode == "heat") {
-		if (temperature >= heatingSetpoint) {
-			statusText = "Right Now: Idle"
-		} else {
-			statusText = "Heating to ${heatingSetpoint} ${location.temperatureScale}"
-			operatingState = "heating"
-		}
-	} else if (mode == "cool") {
-		if (temperature <= coolingSetpoint) {
-			statusText = "Right Now: Idle"
-		} else {
-			statusText = "Cooling to ${coolingSetpoint} ${location.temperatureScale}"
-			operatingState = "cooling"
-		}
-	} else if (mode == "auto") {
-		statusText = "Right Now: Auto"
-		if (temperature < heatingSetpoint) {
-			operatingState = "heating"
-		} else if (temperature > coolingSetpoint) {
-			operatingState = "cooling"
-		}
-	} else if (mode == "off") {
-		statusText = "Right Now: Off"
-	} else {
-		statusText = "?"
-	}
 
+		if (temperature >= heatingSetpoint)
+			statusText = "Right Now: Idle"
+		else
+			statusText = "Heating to ${heatingSetpoint} ${location.temperatureScale}"
+
+	} else if (mode == "cool") {
+
+		if (temperature <= coolingSetpoint)
+			statusText = "Right Now: Idle"
+		else
+			statusText = "Cooling to ${coolingSetpoint} ${location.temperatureScale}"
+
+	} else if (mode == "auto") {
+
+		statusText = "Right Now: Auto"
+
+	} else if (mode == "off") {
+
+		statusText = "Right Now: Off"
+
+	} else if (mode == "auxHeatOnly") {
+
+		statusText = "Emergency Heat"
+
+	} else {
+
+		statusText = "?"
+
+	}
 	log.debug "Generate Status Event = ${statusText}"
 	sendEvent("name":"thermostatStatus", "value":statusText, "description":statusText, displayed: true)
-	sendEvent("name":"thermostatOperatingState", "value":operatingState, "description":operatingState, displayed: false)
 }
 
 def generateActivityFeedsEvent(notificationMessage) {
@@ -820,7 +770,7 @@ def roundC (tempC) {
 }
 
 def convertFtoC (tempF) {
-	return ((Math.round(((tempF - 32)*(5/9)) * 2))/2).toDouble()
+	return String.format("%.1f", (Math.round(((tempF - 32)*(5/9)) * 2))/2)
 }
 
 def convertCtoF (tempC) {

devicetypes/smartthings/econet-vent.src/.st-ignore

@@ -1,2 +0,0 @@
-.st-ignore
-README.md

devicetypes/smartthings/econet-vent.src/README.md

@@ -1,43 +0,0 @@
-# EcoNet Vent
-
-Cloud Execution
-
-Works with: 
-
-* [EcoNet Controls Z-Wave Vent](https://www.smartthings.com/works-with-smartthings/econet-controls/econet-controls-z-wave-vent)
-
-## Table of contents
-
-* [Capabilities](#capabilities)
-* [Health](#device-health)
-* [Troubleshooting](#troubleshooting)
-
-## Capabilities
-
-* **Switch Level** - allows for the control of the level attribute of a light
-* **Actuator** - represents that a Device has commands
-* **Switch** - allows for the control of a switch device
-* **Battery** - defines that the device has a battery
-* **Refresh** - _refresh()_ command for status updates
-* **Sensor** - detects sensor events
-* **Polling** - allows for the polling of devices that support it
-* **Configuration** - allow configuration of devices that support it
-* **Health Check** - indicates ability to get device health notifications
-
-## Device Health
-
-EcoNet Controls Z-Wave Vent is polled by the hub.
-As of hubCore version 0.14.38 the hub sends up reports every 15 minutes regardless of whether the state changed.
-Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*15 + 2)mins = 32 mins.
-Not to mention after going OFFLINE when the device is plugged back in, it might take a considerable amount of time for
-the device to appear as ONLINE again. This is because if this listening device does not respond to two poll requests in a row,
-it is not polled for 5 minutes by the hub. This can delay up the process of being marked ONLINE by quite some time.
-
-* __32min__ checkInterval
-
-## Troubleshooting
-
-If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
-Pairing needs to be tried again by placing the device closer to the hub.
-Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
-* [EcoNet Controls Z-Wave Vent Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/204556420-EcoNet-EV100-Vent)

devicetypes/smartthings/econet-vent.src/econet-vent.groovy

@@ -26,13 +26,11 @@ metadata {
 		capability "Sensor"
         capability "Polling"
         capability "Configuration"
-		capability "Health Check"
 
 		command "open"
 		command "close"
 
 		fingerprint deviceId: "0x1100", inClusters: "0x26,0x72,0x86,0x77,0x80,0x20"
-		fingerprint mfr:"0157", prod:"0100", model:"0100", deviceJoinName: "EcoNet Controls Z-Wave Vent"
 	}
 
 	simulator {
@@ -55,7 +53,7 @@ metadata {
 
 	tiles {
 		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-			state "on", action:"switch.off", icon:"st.vents.vent-open-text", backgroundColor:"#00a0dc"
+			state "on", action:"switch.off", icon:"st.vents.vent-open-text", backgroundColor:"#53a7c0"
 			state "off", action:"switch.on", icon:"st.vents.vent-closed", backgroundColor:"#ffffff"
 		}
         valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat") {
@@ -85,15 +83,8 @@ def parse(String description) {
     result
 }
 
-def installed() {
-	// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-}
-
 //send the command to stop polling
 def updated() {
-	// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 	response("poll stop")
 }
 
@@ -178,13 +169,6 @@ def setLevel(value, duration) {
 	setLevel(value)
 }
 
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-	refresh()
-}
-
 def refresh() {
 	delayBetween([
 		zwave.switchMultilevelV1.switchMultilevelGet().format(),

devicetypes/smartthings/everspring-flood-sensor.src/.st-ignore

@@ -1,2 +0,0 @@
-.st-ignore
-README.md

devicetypes/smartthings/everspring-flood-sensor.src/README.md

@@ -1,40 +0,0 @@
-# Everspring Flood Sensor
-
-Cloud Execution
-
-Works with: 
-
-* [Everspring Water Detector](https://www.smartthings.com/works-with-smartthings/sensors/everspring-water-detector)
-
-## Table of contents
-
-* [Capabilities](#capabilities)
-* [Health](#device-health)
-* [Battery](#battery-specification)
-* [Troubleshooting](#troubleshooting)
-
-## Capabilities
-
-* **Water Sensor** - can detect presence of water (dry or wet)
-* **Configuration** - _configure()_ command called when device is installed or device preferences updated
-* **Sensor** - detects sensor events
-* **Battery** - defines device uses a battery
-* **Health Check** - indicates ability to get device health notifications
-
-## Device Health
-
-Everspring Water Detector is a Z-wave sleepy device and wakes up every 4 hours.
-Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*4*60 + 2)mins = 482 mins.
-
-* __482min__ checkInterval
-
-## Battery Specification
-
-Three AA 1.5V batteries are required.
-
-## Troubleshooting
-
-If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
-Pairing needs to be tried again by placing the device closer to the hub.
-Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
-* [Everspring Water Detector Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/202088304-Everspring-Water-Detector)

devicetypes/smartthings/everspring-flood-sensor.src/everspring-flood-sensor.groovy

@@ -12,12 +12,11 @@
  *
  */
 metadata {
-	definition (name: "Everspring Flood Sensor", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "x.com.st.d.sensor.moisture") {
+	definition (name: "Everspring Flood Sensor", namespace: "smartthings", author: "SmartThings") {
 		capability "Water Sensor"
 		capability "Configuration"
 		capability "Sensor"
 		capability "Battery"
-		capability "Health Check"
 
 		fingerprint deviceId: "0xA102", inClusters: "0x86,0x72,0x85,0x84,0x80,0x70,0x9C,0x20,0x71"
 	}
@@ -29,12 +28,12 @@ metadata {
 			status "battery ${i}%": new physicalgraph.zwave.Zwave().batteryV1.batteryReport(batteryLevel: i).incomingMessage()
 		}
 	}
-
+	
 	tiles(scale: 2) {
 		multiAttributeTile(name:"water", type: "generic", width: 6, height: 4){
 			tileAttribute ("device.water", key: "PRIMARY_CONTROL") {
 				attributeState "dry", icon:"st.alarm.water.dry", backgroundColor:"#ffffff"
-				attributeState "wet", icon:"st.alarm.water.wet", backgroundColor:"#00a0dc"
+				attributeState "wet", icon:"st.alarm.water.wet", backgroundColor:"#53a7c0"
 			}
 		}
 		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
@@ -139,8 +138,6 @@ def zwaveEvent(physicalgraph.zwave.Command cmd)
 
 def configure()
 {
-	// Device wakes up every 4 hours, this interval allows us to miss one wakeup notification before marking offline
-	sendEvent(name: "checkInterval", value: 8 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 	if (!device.currentState("battery")) {
 		sendEvent(name: "battery", value:100, unit:"%", descriptionText:"(Default battery event)", displayed:false)
 	}

devicetypes/smartthings/everspring-illuminance-sensor.src/everspring-illuminance-sensor.groovy

@@ -1,163 +0,0 @@
-/**
- *  Copyright 2017 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- *  Everspring ST815 Illuminance Sensor
- *
- *  Author: SmartThings
- *  Date: 2017-3-4
- */
-
-metadata {
-	definition (name: "Everspring Illuminance Sensor", namespace: "smartthings", author: "SmartThings") {
-		capability "Illuminance Measurement"
-		capability "Battery"
-		capability "Configuration"
-		capability "Sensor"
-		capability "Health Check"
-
-		fingerprint mfr:"0060", prod:"0007", model:"0001"
-	}
-
-	simulator {
-		for( int i = 0; i <= 100; i += 20 ) {
-			status "illuminace ${i} lux": new physicalgraph.zwave.Zwave().sensorMultilevelV2.sensorMultilevelReport(
-				scaledSensorValue: i, precision: 0, sensorType: 3, scale: 1).incomingMessage()
-		}
-
-		for( int i = 0; i <= 100; i += 20 ) {
-			status "battery ${i}%": new physicalgraph.zwave.Zwave().batteryV1.batteryReport(
-				batteryLevel: i).incomingMessage()
-		}
-
-		status "wakeup":  "command: 8407, payload: "
-	}
-
-	tiles(scale: 2) {
-		valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
-			state "temperature", label:'${currentValue}°',
-			backgroundColors:[
-				[value: 32, color: "#153591"],
-				[value: 44, color: "#1e9cbb"],
-				[value: 59, color: "#90d2a7"],
-				[value: 74, color: "#44b621"],
-				[value: 84, color: "#f1d801"],
-				[value: 92, color: "#d04e00"],
-				[value: 98, color: "#bc2323"]
-			]
-		}
-		valueTile("humidity", "device.humidity", inactiveLabel: false, width: 2, height: 2) {
-			state "humidity", label:'${currentValue}% humidity', unit:""
-		}
-		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "battery", label:'${currentValue}% battery', unit:""
-		}
-
-		main( ["temperature", "humidity"] )
-		details( ["temperature", "humidity", "battery"] )
-	}
-}
-
-def updated() {
-	state.configured = false
-}
-
-def parse(String description) {
-	def result = []
-
-	def cmd = zwave.parse(description, [0x20: 1, 0x31: 2, 0x70: 1, 0x71: 1, 0x80: 1, 0x84: 2, 0x85: 2])
-
-	if (cmd) {
-		result = zwaveEvent(cmd)
-	}
-
-	if (result instanceof List) {
-		log.debug "Parsed '$description' to ${result.collect { it.respondsTo("toHubAction") ? it.toHubAction() : it }}"
-	} else {
-		log.debug "Parsed '$description' to ${result}"
-	}
-	return result
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd) {
-	def result = [
-		createEvent(descriptionText: "${device.displayName} woke up", isStateChange: false)
-	]
-	if (state.configured) {
-		result << response(zwave.batteryV1.batteryGet())
-	} else {
-		result << response(configure())
-	}
-	return result
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.alarmv1.AlarmReport cmd) {
-	if (cmd.alarmType == 1 && cmd.alarmType == 0xFF) {
-		return createEvent(descriptionText: "${device.displayName} battery is low", isStateChange: true)
-	} else if (cmd.alarmType == 2 && cmd.alarmLevel == 1) {
-		return createEvent(descriptionText: "${device.displayName} powered up", isStateChange: false)
-	}
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv2.SensorMultilevelReport cmd) {
-
-	def map = [:]
-	switch( cmd.sensorType ) {
-		case 3:
-			// luminance
-			map.value = cmd.scaledSensorValue.toInteger().toString()
-			map.unit = "lux"
-			map.name = "illuminance"
-			break;
-	}
-	
-	return createEvent(map)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
-	def map = [ name: "battery", unit: "%" ]
-	if (cmd.batteryLevel == 0xFF) {
-		map.value = 1
-		map.descriptionText = "${device.displayName} has a low battery"
-		map.isStateChange = true
-	} else {
-		map.value = cmd.batteryLevel
-	}
-
-	def response_cmds  = []
-	if (!currentTemperature) {
-		response_cmds << zwave.sensorMultilevelV2.sensorMultilevelGet().format()
-		response_cmds << "delay 1000"
-	}
-	response_cmds << zwave.wakeUpV1.wakeUpNoMoreInformation().format()
-
-	return [createEvent(map), response(response_cmds)]
-}
-
-def zwaveEvent(physicalgraph.zwave.Command cmd) {
-	log.debug "Unhandled: ${cmd.toString()}"
-	return [:]
-}
-
-def configure() {
-	state.configured = true
-	sendEvent(name: "checkInterval", value: 8 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-	delayBetween([
-		// Auto report time interval in minutes
-		zwave.configurationV1.configurationSet(parameterNumber: 5, size: 2, scaledConfigurationValue: 20).format(),
-
-		// Auto report lux change threshold
-		zwave.configurationV1.configurationSet(parameterNumber: 6, size: 2, scaledConfigurationValue: 30).format(),
-
-		// Get battery – report triggers WakeUpNMI
-		zwave.batteryV1.batteryGet().format()
-	]) 
-}

devicetypes/smartthings/everspring-st814.src/everspring-st814.groovy

@@ -1,188 +0,0 @@
-/**
- *  Copyright 2017 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- *  Everspring ST814 Temperature/Humidity Sensor
- *
- *  Author: SmartThings
- *  Date: 2017-3-4
- */
-
-metadata {
-	definition (name: "Everspring ST814", namespace: "smartthings", author: "SmartThings") {
-		capability "Temperature Measurement"
-		capability "Relative Humidity Measurement"
-		capability "Battery"
-		capability "Configuration"
-		capability "Sensor"
-		capability "Health Check"
-
-		fingerprint mfr:"0060", prod:"0006", model:"0001"
-	}
-
-	simulator {
-		for( int i = 0; i <= 100; i += 20 ) {
-			status "temperature ${i}F": new physicalgraph.zwave.Zwave().sensorMultilevelV2.sensorMultilevelReport(
-				scaledSensorValue: i, precision: 1, sensorType: 1, scale: 1).incomingMessage()
-		}
-
-		for( int i = 0; i <= 100; i += 20 ) {
-			status "humidity ${i}%": new physicalgraph.zwave.Zwave().sensorMultilevelV2.sensorMultilevelReport(
-				scaledSensorValue: i, precision: 0, sensorType: 5).incomingMessage()
-		}
-
-		for( int i = 0; i <= 100; i += 20 ) {
-			status "battery ${i}%": new physicalgraph.zwave.Zwave().batteryV1.batteryReport(
-				batteryLevel: i).incomingMessage()
-		}
-		status "wakeup":  "command: 8407, payload: "
-	}
-
-	tiles(scale: 2) {
-		valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
-			state "temperature", label:'${currentValue}°',
-			backgroundColors:[
-				[value: 32, color: "#153591"],
-				[value: 44, color: "#1e9cbb"],
-				[value: 59, color: "#90d2a7"],
-				[value: 74, color: "#44b621"],
-				[value: 84, color: "#f1d801"],
-				[value: 92, color: "#d04e00"],
-				[value: 98, color: "#bc2323"]
-			]
-		}
-		valueTile("humidity", "device.humidity", inactiveLabel: false, width: 2, height: 2) {
-			state "humidity", label:'${currentValue}% humidity', unit:""
-		}
-		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "battery", label:'${currentValue}% battery', unit:""
-		}
-
-		main( ["temperature", "humidity"] )
-		details( ["temperature", "humidity", "battery"] )
-	}
-}
-
-def updated() {
-	state.configured = false
-}
-
-def parse(String description) {
-	def result = []
-
-	def cmd = zwave.parse(description, [0x20: 1, 0x31: 2, 0x70: 1, 0x71: 1, 0x80: 1, 0x84: 2, 0x85: 2])
-
-	if (cmd) {
-		result = zwaveEvent(cmd)
-	}
-
-	if (result instanceof List) {
-		log.debug "Parsed '$description' to ${result.collect { it.respondsTo("toHubAction") ? it.toHubAction() : it }}"
-	} else {
-		log.debug "Parsed '$description' to ${result}"
-	}
-	return result
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd) {
-	def result = [
-		createEvent(descriptionText: "${device.displayName} woke up", isStateChange: false)
-	]
-	if (state.configured) {
-		result << response(zwave.batteryV1.batteryGet())
-	} else {
-		result << response(configure())
-	}
-	return result
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.alarmv1.AlarmReport cmd) {
-	if (cmd.alarmType == 1 && cmd.alarmType == 0xFF) {
-		return createEvent(descriptionText: "${device.displayName} battery is low", isStateChange: true)
-	} else if (cmd.alarmType == 2 && cmd.alarmLevel == 1) {
-		return createEvent(descriptionText: "${device.displayName} powered up", isStateChange: false)
-	}
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv2.SensorMultilevelReport cmd) {
-
-	def map = [:]
-	switch( cmd.sensorType ) {
-		case 1:
-			/* temperature */
-			def cmdScale = cmd.scale == 1 ? "F" : "C"
-			map.value = convertTemperatureIfNeeded(cmd.scaledSensorValue, cmdScale, cmd.precision)
-			map.unit = getTemperatureScale()
-			map.name = "temperature"
-			break
-		case 5:
-			/* humidity */
-			map.value = cmd.scaledSensorValue.toInteger().toString()
-			map.unit = "%"
-			map.name = "humidity"
-			break
-	}
-	
-	return createEvent(map)
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
-	def map = [ name: "battery", unit: "%" ]
-	if (cmd.batteryLevel == 0xFF) {
-		map.value = 1
-		map.descriptionText = "${device.displayName} has a low battery"
-		map.isStateChange = true
-	} else {
-		map.value = cmd.batteryLevel
-	}
-
-	def response_cmds  = []
-	if (!currentTemperature) {
-		response_cmds << zwave.sensorMultilevelV2.sensorMultilevelGet().format()
-		response_cmds << "delay 1000"
-	}
-	response_cmds << zwave.wakeUpV1.wakeUpNoMoreInformation().format()
-
-	return [createEvent(map), response(response_cmds)]
-}
-
-def zwaveEvent(physicalgraph.zwave.commands.multichannelv3.MultiChannelCmdEncap cmd) {
-	def result = null
-	def encapsulatedCommand = cmd.encapsulatedCommand([0x20: 1, 0x31: 2, 0x70: 1, 0x71: 1, 0x80: 1, 0x84: 2, 0x85: 2])
-	log.debug ("Command from endpoint ${cmd.sourceEndPoint}: ${encapsulatedCommand}")
-	if (encapsulatedCommand) {
-		result = zwaveEvent(encapsulatedCommand)
-	}
-	result
-}
-
-def zwaveEvent(physicalgraph.zwave.Command cmd) {
-	log.debug "Unhandled: ${cmd.toString()}"
-	return [:]
-}
-
-def configure() {
-	state.configured = true
-	sendEvent(name: "checkInterval", value: 8 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-	delayBetween([
-		// Auto report time interval in minutes
-		zwave.configurationV1.configurationSet(parameterNumber: 6, size: 2, scaledConfigurationValue: 20).format(),
-
-		// Auto report temperature change threshold
-		zwave.configurationV1.configurationSet(parameterNumber: 7, size: 1, scaledConfigurationValue: 2).format(),
-
-		// Auto report humidity change threshold
-		zwave.configurationV1.configurationSet(parameterNumber: 8, size: 1, scaledConfigurationValue: 5).format(),
-
-		// Get battery – report triggers WakeUpNMI
-		zwave.batteryV1.batteryGet().format()
-	]) 
-}

devicetypes/smartthings/fibaro-dimmer.src/fibaro-dimmer.groovy

@@ -56,9 +56,9 @@ metadata {
 
 	tiles {
 		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-			state "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#00a0dc", nextState:"turningOff"
+			state "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
 			state "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
-			state "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#00a0dc", nextState:"turningOff"
+			state "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
 			state "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
 		}
 		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {

devicetypes/smartthings/fibaro-door-window-sensor.src/.st-ignore

@@ -1,2 +0,0 @@
-.st-ignore
-README.md

devicetypes/smartthings/fibaro-door-window-sensor.src/README.md

@@ -1,40 +0,0 @@
-# Fibaro Door Window Sensor
-
-Cloud Execution
-
-Works with: 
-
-* [Fibaro Door/Window Sensor](https://www.smartthings.com/works-with-smartthings/sensors/fibaro-doorwindow-sensor)
-
-## Table of contents
-
-* [Capabilities](#capabilities)
-* [Health](#device-health)
-* [Battery](#battery-specification)
-* [Troubleshooting](#troubleshooting)
-
-## Capabilities
-
-* **Contact Sensor** - can detect contact (possible values: open,closed)
-* **Sensor** - detects sensor events
-* **Battery** - defines device uses a battery
-* **Configuration** - _configure()_ command called when device is installed or device preferences updated
-* **Health Check** - indicates ability to get device health notifications
-
-## Device Health
-
-Fibaro Door/Window Sensor is a Z-wave sleepy device and wakes up every 4 hours.
-Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*4*60 + 2)mins = 482 mins.
-
-* __482min__ checkInterval
-
-## Battery Specification
-
-One 1/2AA 3.6V battery is required.
-
-## Troubleshooting
-
-If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
-Pairing needs to be tried again by placing the device closer to the hub.
-Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
-* [Fibaro Door/Window Sensor Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/204075194-Fibaro-Door-Window-Sensor)

devicetypes/smartthings/fibaro-door-window-sensor.src/fibaro-door-window-sensor.groovy

@@ -39,8 +39,7 @@
 		capability 	"Contact Sensor"
 		capability 	"Sensor"
 		capability 	"Battery"
-		capability 	"Configuration"
+        capability 	"Configuration"
-		capability  "Health Check"
         
         command		"resetParams2StDefaults"
         command		"listCurrentParams"
@@ -68,8 +67,8 @@
 
 	tiles {
 		standardTile("contact", "device.contact", width: 2, height: 2) {
-			state "open",   label: '${name}', icon: "st.contact.contact.open",   backgroundColor: "#e86d13"
+			state "open",   label: '${name}', icon: "st.contact.contact.open",   backgroundColor: "#ffa81e"
-			state "closed", label: '${name}', icon: "st.contact.contact.closed", backgroundColor: "#00A0DC"
+			state "closed", label: '${name}', icon: "st.contact.contact.closed", backgroundColor: "#79b821"
 		}
 		valueTile("temperature", "device.temperature", inactiveLabel: false) {
 			state "temperature", label:'${currentValue}°',
@@ -86,7 +85,7 @@
 		}
         standardTile("tamper", "device.alarm") {
 			state("secure", label:'secure',    icon:"st.locks.lock.locked",   backgroundColor:"#ffffff")
-			state("tampered", label:'tampered', icon:"st.locks.lock.unlocked", backgroundColor:"#00a0dc")
+			state("tampered", label:'tampered', icon:"st.locks.lock.unlocked", backgroundColor:"#53a7c0")
 		}
 		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat") {
 			state "battery", label:'${currentValue}% battery', unit:""
@@ -267,9 +266,6 @@ def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerS
  */
 def configure() {
 	log.debug "Configuring Device..."
-	// Device wakes up every 4 hours, this interval allows us to miss one wakeup notification before marking offline
-	sendEvent(name: "checkInterval", value: 8 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-
 	def cmds = []
 	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,0], parameterNumber: 1, size: 2).format()
 	// send associate to group 3 to get sensor data reported only to hub

devicetypes/smartthings/fibaro-flood-sensor.src/fibaro-flood-sensor.groovy

@@ -1,12 +1,12 @@
 /**
  *  Device Type Definition File
  *
- *  Device Type:        Fibaro Flood Sensor
+ *  Device Type:		Fibaro Flood Sensor
- *  File Name:          fibaro-flood-sensor.groovy
+ *  File Name:			fibaro-flood-sensor.groovy
- *  Initial Release:    2014-12-10
+ *	Initial Release:	2014-12-10
- *  @author:            Todd Wackford
+ *	@author:			Todd Wackford
- *  Email:              todd@wackford.net
+ *  Email:				todd@wackford.net
- *  @version:           1.0
+ *  @version:			1.0
  *
  *  Copyright 2014 SmartThings
  *
@@ -26,8 +26,8 @@
  * not displayed to the user. We do this so we can receive events and display on device 
  * activity. If the user wants to display the tamper tile, adjust the tile display lines
  * with the following:
- *      main(["water", "temperature", "tamper"])
+ *		main(["water", "temperature", "tamper"])
- *      details(["water", "temperature", "battery", "tamper"])
+ *		details(["water", "temperature", "battery", "tamper"])
  *
  * @param none
  *
@@ -39,18 +39,13 @@ metadata {
 		capability "Temperature Measurement"
 		capability "Configuration"
 		capability "Battery"
-		capability "Health Check"
+       
-    capability "Sensor"
+        command		"resetParams2StDefaults"
-    
+        command		"listCurrentParams"
-		command    "resetParams2StDefaults"
+        command		"updateZwaveParam"
-		command    "listCurrentParams"
+        command		"test"
-		command    "updateZwaveParam"
+        
-		command    "test"
-
 		fingerprint deviceId: "0xA102", inClusters: "0x30,0x9C,0x60,0x85,0x8E,0x72,0x70,0x86,0x80,0x84"
-		fingerprint mfr:"010F", prod:"0000", model:"2002"
-		fingerprint mfr:"010F", prod:"0000", model:"1002"
-		fingerprint mfr:"010F", prod:"0B00", model:"1001"
 	}
 
 	simulator {
@@ -77,7 +72,7 @@ metadata {
 	tiles {
 		standardTile("water", "device.water", width: 2, height: 2) {
 			state "dry", icon:"st.alarm.water.dry", backgroundColor:"#ffffff"
-			state "wet", icon:"st.alarm.water.wet", backgroundColor:"#00a0dc"
+			state "wet", icon:"st.alarm.water.wet", backgroundColor:"#53a7c0"
 		}
 		valueTile("temperature", "device.temperature", inactiveLabel: false) {
 			state "temperature", label:'${currentValue}°',
@@ -91,9 +86,9 @@ metadata {
 				[value: 96, color: "#bc2323"]
 			]
 		}
-		standardTile("tamper", "device.tamper") {
+        standardTile("tamper", "device.tamper") {
-			state("secure",         label:"secure",         icon:"st.locks.lock.locked",   backgroundColor:"#ffffff")
+			state("secure", 	label:"secure",   	icon:"st.locks.lock.locked",   backgroundColor:"#ffffff")
-			state("tampered",       label:"tampered",       icon:"st.locks.lock.unlocked", backgroundColor:"#00a0dc")
+			state("tampered", 	label:"tampered", 	icon:"st.locks.lock.unlocked", backgroundColor:"#53a7c0")
 		}
 		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat") {
 			state "battery", label:'${currentValue}% battery', unit:""
@@ -111,17 +106,26 @@ metadata {
 def parse(String description)
 {
 	def result = []
-
+	
-	def cmd = zwave.parse(description, [0x31: 2, 0x30: 1, 0x70: 2, 0x71: 1, 0x84: 1, 0x80: 1, 0x9C: 1, 0x72: 2, 0x56: 2, 0x60: 3])
+    if (description == "updated") {
-
+    	if (!state.MSR) {
-	if (cmd) {
+			result << response(zwave.wakeUpV1.wakeUpIntervalSet(seconds: 60*60, nodeid:zwaveHubNodeId))
-		result += zwaveEvent(cmd) //createEvent(zwaveEvent(cmd))   
+			result << response(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
-	}
+		} 
-
+    } else {
-	if ( result[0] != null ) {
+		def cmd = zwave.parse(description, [0x31: 2, 0x30: 1, 0x70: 2, 0x71: 1, 0x84: 1, 0x80: 1, 0x9C: 1, 0x72: 2, 0x56: 2, 0x60: 3])
+    
+		if (cmd) {
+			result += zwaveEvent(cmd) //createEvent(zwaveEvent(cmd))   
+		}
+    }
+    
+    result << response(zwave.batteryV1.batteryGet().format())
+    
+    if ( result[0] != null ) {
 		log.debug "Parse returned ${result}"
 		result
-	}
+    }
 }
 
 
@@ -138,9 +142,10 @@ def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd) {
 	def result = [createEvent(descriptionText: "${device.displayName} woke up", isStateChange: false)]
 	if (!isConfigured()) {
 		// we're still in the process of configuring a newly joined device
-		result << lateConfigure(true)
+		result += lateConfigure(true)
 	} else {
-		result << response(zwave.wakeUpV1.wakeUpNoMoreInformation())
+		result += response(zwave.wakeUpV1.wakeUpNoMoreInformation())
+        log.debug "We're done with WakeUp!"
 	}
 	result
 }
@@ -148,7 +153,7 @@ def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd) {
 def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv2.SensorMultilevelReport cmd)
 {
 	def map = [:]
-
+    
 	switch (cmd.sensorType) {
 		case 1:
 			// temperature
@@ -179,7 +184,7 @@ def zwaveEvent(physicalgraph.zwave.commands.sensorbinaryv1.SensorBinaryReport cm
 	def map = [:]
 	map.value = cmd.sensorValue ? "active" : "inactive"
 	map.name = "acceleration"
-
+    
 	if (map.value == "active") {
 		map.descriptionText = "$device.displayName detected vibration"
 	}
@@ -194,49 +199,49 @@ def zwaveEvent(physicalgraph.zwave.commands.configurationv2.ConfigurationReport
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd) {
-	log.debug "BasicSet with CMD = ${cmd}"
+    log.debug "BasicSet with CMD = ${cmd}"
-
+    
-	if (!isConfigured()) {
+    if (!isConfigured()) {
-		def result = []
+    	def result = []
-		def map = [:]
+    	def map = [:]
-
+    
-		map.name = "water"
+    	map.name = "water"
 		map.value = cmd.value ? "wet" : "dry"
 		map.descriptionText = "${device.displayName} is ${map.value}"
-
+    
-		// If we are getting a BasicSet, and isConfigured == false, then we are likely NOT properly configured.
+    	// If we are getting a BasicSet, and isConfigured == false, then we are likely NOT properly configured.
-		result += lateConfigure(true)
+    	result += lateConfigure(true)
-
+    
-		result << createEvent(map)
+    	result << createEvent(map)
-
+        
-		result
+        result
-	}
+    }
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.sensoralarmv1.SensorAlarmReport cmd)
 {
 	def map = [:]
-
+    
 	if (cmd.sensorType == 0x05) {
 		map.name = "water"
 		map.value = cmd.sensorState ? "wet" : "dry"
 		map.descriptionText = "${device.displayName} is ${map.value}"
-
+        
-		log.debug "CMD = SensorAlarmReport: ${cmd}"
+        log.debug "CMD = SensorAlarmReport: ${cmd}"
-		setConfigured()
+    	setConfigured()
-	} else if ( cmd.sensorType == 0) {
+    } else if ( cmd.sensorType == 0) {
-		map.name = "tamper"
+    	map.name = "tamper"
-		map.isStateChange = true
+        map.isStateChange = true
-		map.value = cmd.sensorState ? "tampered" : "secure"
+        map.value = cmd.sensorState ? "tampered" : "secure"
-		map.descriptionText = "${device.displayName} has been tampered with"
+        map.descriptionText = "${device.displayName} has been tampered with"
-		runIn(30, "resetTamper") //device does not send alarm cancelation
+        runIn(30, "resetTamper") //device does not send alarm cancelation
-
+        
-	} else if ( cmd.sensorType == 1) {
+    } else if ( cmd.sensorType == 1) {
-		map.name = "tamper"
+    	map.name = "tamper"
-		map.value = cmd.sensorState ? "tampered" : "secure"
+        map.value = cmd.sensorState ? "tampered" : "secure"
-		map.descriptionText = "${device.displayName} has been tampered with"
+        map.descriptionText = "${device.displayName} has been tampered with"
-		runIn(30, "resetTamper") //device does not send alarm cancelation
+        runIn(30, "resetTamper") //device does not send alarm cancelation
-
+        
 	} else {
 		map.descriptionText = "${device.displayName}: ${cmd}"
 	}
@@ -245,10 +250,10 @@ def zwaveEvent(physicalgraph.zwave.commands.sensoralarmv1.SensorAlarmReport cmd)
 
 def resetTamper() {
 	def map = [:]
-	map.name = "tamper"
+    map.name = "tamper"
-	map.value = "secure"
+    map.value = "secure"
-	map.descriptionText = "$device.displayName is secure"
+    map.descriptionText = "$device.displayName is secure"
-	sendEvent(map)
+    sendEvent(map)
 }
 
 def zwaveEvent(physicalgraph.zwave.Command cmd) {
@@ -262,10 +267,10 @@ def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerS
 	def msr = String.format("%04X-%04X-%04X", cmd.manufacturerId, cmd.productTypeId, cmd.productId)
 	log.debug "msr: $msr"
 	device.updateDataValue(["MSR", msr])
-
+    
-	if ( msr == "010F-0B00-2001" ) { //this is the msr and device type for the fibaro flood sensor
+    if ( msr == "010F-0B00-2001" ) { //this is the msr and device type for the fibaro flood sensor
-		result += lateConfigure(true)
+    	result += lateConfigure(true)
-	}
+    }
 
 	result << createEvent(descriptionText: "$device.displayName MSR: $msr", isStateChange: false)
 	result
@@ -277,17 +282,17 @@ def setConfigured() {
 
 def isConfigured() {
 	Boolean configured = device.getDataValue(["configured"]) as Boolean
-
+    
-	return configured
+    return configured
 }
 
 def lateConfigure(setConf = False) {
 	def res = response(configure())
-
+    
-	if (setConf)
+    if (setConf)
-		setConfigured()
+        setConfigured()
-
+        
-	return res
+    return res
 }
 
  /**
@@ -299,34 +304,26 @@ def lateConfigure(setConf = False) {
  */
 def configure() {
 	log.debug "Configuring Device..."
-	// Device wakes up every 4 hours, this interval allows us to miss one wakeup notification before marking offline
+    def cmds = []
-	sendEvent(name: "checkInterval", value: 8 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+    
-
+    // send associate to group 2 to get alarm data
-	// default initial state
+    cmds << zwave.associationV2.associationSet(groupingIdentifier:2, nodeId:[zwaveHubNodeId]).format()
-	sendEvent(name: "water", value: "dry")
+    
-
+    cmds << zwave.configurationV1.configurationSet(configurationValue: [255], parameterNumber: 5, size: 1).format()
-	def cmds = []
+    
-
+    // send associate to group 3 to get sensor data reported only to hub
-	// send associate to group 2 to get alarm data
+    cmds << zwave.associationV2.associationSet(groupingIdentifier:3, nodeId:[zwaveHubNodeId]).format()
-	cmds << zwave.associationV2.associationSet(groupingIdentifier:2, nodeId:[zwaveHubNodeId]).format()
-
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [255], parameterNumber: 5, size: 1).format()
-
-	// send associate to group 3 to get sensor data reported only to hub
-	cmds << zwave.associationV2.associationSet(groupingIdentifier:3, nodeId:[zwaveHubNodeId]).format()
-
-	// reporting frequency of temps and battery set to one hour
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,60*60], parameterNumber: 10, size: 2).format()
-	// cmds << zwave.configurationV1.configurationGet(parameterNumber: 10).format()
 
 	// temp hysteresis set to .5 degrees celcius
 	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,50], parameterNumber: 12, size: 2).format()
-	// cmds << zwave.configurationV1.configurationGet(parameterNumber: 12).format()
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 12).format()
-
-	cmds << zwave.batteryV1.batteryGet().format()
-
-	cmds << zwave.wakeUpV1.wakeUpNoMoreInformation().format()
 
+	// reporting frequency of temps and battery set to one hour
+	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,60*60], parameterNumber: 10, size: 2).format()
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 10).format()
+    
+    cmds << zwave.wakeUpV1.wakeUpNoMoreInformation().format()
+    
 	delayBetween(cmds, 100)
 }
 
@@ -352,18 +349,18 @@ def test() {
  * @return none
  */
 def updateZwaveParam(params) {
-	if ( params ) {
+	if ( params ) {     
-		def pNumber = params.paramNumber
+        def pNumber = params.paramNumber
-		def pSize	= params.size
+        def pSize	= params.size
-		def pValue	= [params.value]
+        def pValue	= [params.value]
-		log.debug "Make sure device is awake and in recieve mode (triple-click?)"
+        log.debug "Make sure device is awake and in recieve mode (triple-click?)"
-		log.debug "Updating ${device.displayName} parameter number '${pNumber}' with value '${pValue}' with size of '${pSize}'"
+        log.debug "Updating ${device.displayName} parameter number '${pNumber}' with value '${pValue}' with size of '${pSize}'"
 
 		def cmds = []
-		cmds << zwave.configurationV1.configurationSet(configurationValue: pValue, parameterNumber: pNumber, size: pSize).format()
+        cmds << zwave.configurationV1.configurationSet(configurationValue: pValue, parameterNumber: pNumber, size: pSize).format()
-		cmds << zwave.configurationV1.configurationGet(parameterNumber: pNumber).format()
+        cmds << zwave.configurationV1.configurationGet(parameterNumber: pNumber).format()
-		delayBetween(cmds, 1000)
+        delayBetween(cmds, 1000)        
-	}
+    }
 }
 
  /**
@@ -380,26 +377,26 @@ def updateZwaveParam(params) {
 def resetParams2StDefaults() {
 	log.debug "Resetting ${device.displayName} parameters to SmartThings compatible defaults"
 	def cmds = []
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,0],			parameterNumber: 1,	 size: 2).format()
+	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,0], 			parameterNumber: 1,  size: 2).format()
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [3],				parameterNumber: 2,	 size: 1).format()
+    cmds << zwave.configurationV1.configurationSet(configurationValue: [3], 			parameterNumber: 2,  size: 1).format()
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [255],			parameterNumber: 5,	 size: 1).format()
+    cmds << zwave.configurationV1.configurationSet(configurationValue: [255], 			parameterNumber: 5,  size: 1).format()
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [255],			parameterNumber: 7,	 size: 1).format()
+    cmds << zwave.configurationV1.configurationSet(configurationValue: [255], 			parameterNumber: 7,  size: 1).format()
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [1],				parameterNumber: 9,	 size: 1).format()
+    cmds << zwave.configurationV1.configurationSet(configurationValue: [1], 			parameterNumber: 9,  size: 1).format()
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,60*60],		parameterNumber: 10, size: 2).format()
+    cmds << zwave.configurationV1.configurationSet(configurationValue: [0,60*60], 		parameterNumber: 10, size: 2).format()
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,50],			parameterNumber: 12, size: 2).format()
+    cmds << zwave.configurationV1.configurationSet(configurationValue: [0,50], 			parameterNumber: 12, size: 2).format()
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [0],				parameterNumber: 13, size: 1).format()
+    cmds << zwave.configurationV1.configurationSet(configurationValue: [0],				parameterNumber: 13, size: 1).format()
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [5,220],			parameterNumber: 50, size: 2).format()
+    cmds << zwave.configurationV1.configurationSet(configurationValue: [5,220], 		parameterNumber: 50, size: 2).format()
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [13,172],		parameterNumber: 51, size: 2).format()
+    cmds << zwave.configurationV1.configurationSet(configurationValue: [13,172],		parameterNumber: 51, size: 2).format()
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,0,0,225],		parameterNumber: 61, size: 4).format()
+    cmds << zwave.configurationV1.configurationSet(configurationValue: [0,0,0,225],		parameterNumber: 61, size: 4).format()
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,255,0,0],		parameterNumber: 62, size: 4).format()
+    cmds << zwave.configurationV1.configurationSet(configurationValue: [0,255,0,0], 	parameterNumber: 62, size: 4).format()
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [2],				parameterNumber: 63, size: 1).format()
+    cmds << zwave.configurationV1.configurationSet(configurationValue: [2], 			parameterNumber: 63, size: 1).format()
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,0],			parameterNumber: 73, size: 2).format()
+    cmds << zwave.configurationV1.configurationSet(configurationValue: [0,0], 			parameterNumber: 73, size: 2).format()
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [2],				parameterNumber: 74, size: 1).format()
+    cmds << zwave.configurationV1.configurationSet(configurationValue: [2], 			parameterNumber: 74, size: 1).format()
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,0],			parameterNumber: 75, size: 2).format()
+    cmds << zwave.configurationV1.configurationSet(configurationValue: [0,0], 			parameterNumber: 75, size: 2).format()
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [0,0],			parameterNumber: 76, size: 2).format()
+    cmds << zwave.configurationV1.configurationSet(configurationValue: [0,0], 			parameterNumber: 76, size: 2).format()
-	cmds << zwave.configurationV1.configurationSet(configurationValue: [0],				parameterNumber: 77, size: 1).format()
+    cmds << zwave.configurationV1.configurationSet(configurationValue: [0], 			parameterNumber: 77, size: 1).format()
-
+    
-	delayBetween(cmds, 1200)
+    delayBetween(cmds, 1200)
 }
 
  /**
@@ -416,25 +413,25 @@ def resetParams2StDefaults() {
 def listCurrentParams() {
 	log.debug "Listing of current parameter settings of ${device.displayName}"
 	def cmds = []
-	cmds << zwave.configurationV1.configurationGet(parameterNumber: 1).format() 
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 1).format() 
-	cmds << zwave.configurationV1.configurationGet(parameterNumber: 2).format() 
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 2).format() 
-	cmds << zwave.configurationV1.configurationGet(parameterNumber: 5).format() 
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 5).format() 
-	cmds << zwave.configurationV1.configurationGet(parameterNumber: 7).format()
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 7).format()
-	cmds << zwave.configurationV1.configurationGet(parameterNumber: 9).format()
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 9).format()
-	cmds << zwave.configurationV1.configurationGet(parameterNumber: 10).format()
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 10).format()
-	cmds << zwave.configurationV1.configurationGet(parameterNumber: 12).format()
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 12).format()
-	cmds << zwave.configurationV1.configurationGet(parameterNumber: 13).format()
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 13).format()
-	cmds << zwave.configurationV1.configurationGet(parameterNumber: 50).format()
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 50).format()
-	cmds << zwave.configurationV1.configurationGet(parameterNumber: 51).format()
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 51).format()
-	cmds << zwave.configurationV1.configurationGet(parameterNumber: 61).format()
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 61).format()
-	cmds << zwave.configurationV1.configurationGet(parameterNumber: 62).format()
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 62).format()
-	cmds << zwave.configurationV1.configurationGet(parameterNumber: 63).format()
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 63).format()
-	cmds << zwave.configurationV1.configurationGet(parameterNumber: 73).format()
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 73).format()
-	cmds << zwave.configurationV1.configurationGet(parameterNumber: 74).format()
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 74).format()
-	cmds << zwave.configurationV1.configurationGet(parameterNumber: 75).format()
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 75).format()
-	cmds << zwave.configurationV1.configurationGet(parameterNumber: 76).format()
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 76).format()
-	cmds << zwave.configurationV1.configurationGet(parameterNumber: 77).format()
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 77).format()
-
+    
 	delayBetween(cmds, 1200)
 }
 

devicetypes/smartthings/fibaro-motion-sensor.src/fibaro-motion-sensor.groovy

@@ -29,7 +29,7 @@
  * 2.	20150125	Todd Wackford
  *		Leaned out parse and moved most device info getting into configuration method.
  */
-
+ 
  /**
  * Sets up metadata, simulator info and tile definition.
  *
@@ -38,7 +38,7 @@
  * @return none
  */
  metadata {
-	definition (name: "Fibaro Motion Sensor", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "x.com.st.d.sensor.motion") {
+	definition (name: "Fibaro Motion Sensor", namespace: "smartthings", author: "SmartThings") {
 		capability 	"Motion Sensor"
 		capability 	"Temperature Measurement"
 		capability 	"Acceleration Sensor"
@@ -46,8 +46,7 @@
 		capability 	"Illuminance Measurement"
 		capability 	"Sensor"
 		capability 	"Battery"
-		capability  "Health Check"
+        
-
         command		"resetParams2StDefaults"
         command		"listCurrentParams"
         command		"updateZwaveParam"
@@ -82,8 +81,8 @@
 
 	tiles {
 		standardTile("motion", "device.motion", width: 2, height: 2) {
-			state "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#00a0dc"
+			state "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0"
-			state "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#cccccc"
+			state "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff"
 		}
 		valueTile("temperature", "device.temperature", inactiveLabel: false) {
 			state "temperature", label:'${currentValue}°',
@@ -107,10 +106,10 @@
 			state "configure", label:'', action:"configuration.configure", icon:"st.secondary.configure"
 		}
         standardTile("acceleration", "device.acceleration") {
-			state("active", label:'vibration', icon:"st.motion.acceleration.active", backgroundColor:"#00a0dc")
+			state("active", label:'vibration', icon:"st.motion.acceleration.active", backgroundColor:"#53a7c0")
-			state("inactive", label:'still', icon:"st.motion.acceleration.inactive", backgroundColor:"#cccccc")
+			state("inactive", label:'still', icon:"st.motion.acceleration.inactive", backgroundColor:"#ffffff")
 		}
-
+        
 
 		main(["motion", "temperature", "acceleration", "illuminance"])
 		details(["motion", "temperature", "acceleration", "battery", "illuminance", "configure"])
@@ -126,22 +125,19 @@
  */
 def configure() {
 	log.debug "Configuring Device For SmartThings Use"
-	// Device-Watch simply pings if no device events received for 8 hrs & 2 minutes
-	sendEvent(name: "checkInterval", value: 8 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-
     def cmds = []
-
+    
     // send associate to group 3 to get sensor data reported only to hub
     cmds << zwave.associationV2.associationSet(groupingIdentifier:3, nodeId:[zwaveHubNodeId]).format()
 
 	// turn on tamper sensor with active/inactive reports (use it as an acceleration sensor) default is 0, or off
 	cmds << zwave.configurationV1.configurationSet(configurationValue: [4], parameterNumber: 24, size: 1).format()
     cmds << zwave.configurationV1.configurationGet(parameterNumber: 24).format()
-
+        
     // temperature change report threshold (0-255 = 0.1 to 25.5C) default is 1.0 Celcius, setting to .5 Celcius
     cmds << zwave.configurationV1.configurationSet(configurationValue: [5], parameterNumber: 60, size: 1).format()
-    cmds << zwave.configurationV1.configurationGet(parameterNumber: 60).format()
+    cmds << zwave.configurationV1.configurationGet(parameterNumber: 60).format() 
-
+    
     cmds << response(zwave.batteryV1.batteryGet())
     cmds << response(zwave.versionV1.versionGet().format())
     cmds << response(zwave.manufacturerSpecificV2.manufacturerSpecificGet().format())
@@ -155,20 +151,20 @@ def parse(String description)
 {
 	def result = []
 	def cmd = zwave.parse(description, [0x72: 2, 0x31: 2, 0x30: 1, 0x84: 1, 0x9C: 1, 0x70: 2, 0x80: 1, 0x86: 1, 0x7A: 1, 0x56: 1])
-
+    
     if (description == "updated") {
         result << response(zwave.wakeUpV1.wakeUpIntervalSet(seconds: 7200, nodeid:zwaveHubNodeId))
-		result << response(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
+		result << response(zwave.manufacturerSpecificV2.manufacturerSpecificGet())            
 	}
-
+    
 	if (cmd) {
-		if( cmd.CMD == "8407" ) {
+		if( cmd.CMD == "8407" ) { 
             result << response(zwave.batteryV1.batteryGet().format())
-        	result << new physicalgraph.device.HubAction(zwave.wakeUpV1.wakeUpNoMoreInformation().format())
+        	result << new physicalgraph.device.HubAction(zwave.wakeUpV1.wakeUpNoMoreInformation().format()) 
         }
 		result << createEvent(zwaveEvent(cmd))
 	}
-
+    
     if ( result[0] != null ) {
 		log.debug "Parse returned ${result}"
 		result
@@ -189,14 +185,14 @@ def zwaveEvent(physicalgraph.zwave.commands.crc16encapv1.Crc16Encap cmd)
 	}
 }
 
-def createEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd, Map item1) {
+def createEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd, Map item1) { 
 	log.debug "manufacturerId:   ${cmd.manufacturerId}"
     log.debug "manufacturerName: ${cmd.manufacturerName}"
     log.debug "productId:        ${cmd.productId}"
     log.debug "productTypeId:    ${cmd.productTypeId}"
 }
 
-def createEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd, Map item1) {
+def createEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd, Map item1) {	
     updateDataValue("applicationVersion", "${cmd.applicationVersion}")
     log.debug "applicationVersion:      ${cmd.applicationVersion}"
     log.debug "applicationSubVersion:   ${cmd.applicationSubVersion}"
@@ -205,7 +201,7 @@ def createEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd, Map it
     log.debug "zWaveProtocolSubVersion: ${cmd.zWaveProtocolSubVersion}"
 }
 
-def createEvent(physicalgraph.zwave.commands.firmwareupdatemdv1.FirmwareMdReport cmd, Map item1) {
+def createEvent(physicalgraph.zwave.commands.firmwareupdatemdv1.FirmwareMdReport cmd, Map item1) { 
     log.debug "checksum:       ${cmd.checksum}"
     log.debug "firmwareId:     ${cmd.firmwareId}"
     log.debug "manufacturerId: ${cmd.manufacturerId}"
@@ -304,7 +300,7 @@ def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerS
 	def msr = String.format("%04X-%04X-%04X", cmd.manufacturerId, cmd.productTypeId, cmd.productId)
 	log.debug "msr: $msr"
     updateDataValue("MSR", msr)
-
+    
     if ( msr == "010F-0800-2001" ) { //this is the msr and device type for the fibaro motion sensor
     	configure()
     }
@@ -334,7 +330,7 @@ def test() {
  * @return none
  */
 def updateZwaveParam(params) {
-	if ( params ) {
+	if ( params ) {   
         def pNumber = params.paramNumber
         def pSize	= params.size
         def pValue	= [params.value]
@@ -344,7 +340,7 @@ def updateZwaveParam(params) {
 		def cmds = []
         cmds << zwave.configurationV1.configurationSet(configurationValue: pValue, parameterNumber: pNumber, size: pSize).format()
         cmds << zwave.configurationV1.configurationGet(parameterNumber: pNumber).format()
-        delayBetween(cmds, 1000)
+        delayBetween(cmds, 1000)        
     }
 }
 
@@ -388,13 +384,13 @@ def resetParams2StDefaults() {
     cmds << zwave.configurationV1.configurationSet(configurationValue: [18], parameterNumber: 86, size: 1).format()
     cmds << zwave.configurationV1.configurationSet(configurationValue: [28], parameterNumber: 87, size: 1).format()
     cmds << zwave.configurationV1.configurationSet(configurationValue: [1], parameterNumber: 89, size: 1).format()
-
+    
     delayBetween(cmds, 500)
 }
 
  /**
- * Lists all of available Fibaro parameters and thier current settings out to the
+ * Lists all of available Fibaro parameters and thier current settings out to the 
- * logging window in the IDE This will be called from the "Fibaro Tweaker" or
+ * logging window in the IDE This will be called from the "Fibaro Tweaker" or 
  * user's own app.
  *
  * <p>THIS IS AN ADVANCED OPERATION. USE AT YOUR OWN RISK! READ OEM DOCUMENTATION!
@@ -433,6 +429,7 @@ def listCurrentParams() {
     cmds << zwave.configurationV1.configurationGet(parameterNumber: 86).format()
     cmds << zwave.configurationV1.configurationGet(parameterNumber: 87).format()
     cmds << zwave.configurationV1.configurationGet(parameterNumber: 89).format()
-
+    
 	delayBetween(cmds, 500)
 }
+

devicetypes/smartthings/fibaro-rgbw-controller.src/fibaro-rgbw-controller.groovy

@@ -29,10 +29,10 @@
 		capability "Polling"
 		capability "Refresh"
 		capability "Sensor"
-		capability "Configuration"
+		capability "Configuration" 
 		capability "Color Control"
         capability "Power Meter"
-
+       
         command "getDeviceData"
         command "softwhite"
         command "daylight"
@@ -54,12 +54,12 @@
         command "setAdjustedColor"
         command "setWhiteLevel"
         command "test"
-
+        
         attribute "whiteLevel", "string"
-
+      
 		fingerprint deviceId: "0x1101", inClusters: "0x27,0x72,0x86,0x26,0x60,0x70,0x32,0x31,0x85,0x33"
 	}
-
+    
     simulator {
     	status "on":  "command: 2003, payload: FF"
     	status "off": "command: 2003, payload: 00"
@@ -84,14 +84,14 @@
 		}
 		controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 2, inactiveLabel: false) {
 			state "level", action:"switch level.setLevel"
-		}
+		}     
 		controlTile("whiteSliderControl", "device.whiteLevel", "slider", height: 1, width: 3, inactiveLabel: false) {
             state "whiteLevel", action:"setWhiteLevel", label:'White Level'
         }
 		standardTile("switch", "device.switch", width: 1, height: 1, canChangeIcon: true) {
-        	state "on", label:'${name}', action:"switch.off", icon:"st.illuminance.illuminance.bright", backgroundColor:"#00A0DC", nextState:"turningOff"
+        	state "on", label:'${name}', action:"switch.off", icon:"st.illuminance.illuminance.bright", backgroundColor:"#79b821", nextState:"turningOff"
             state "off", label:'${name}', action:"switch.on", icon:"st.illuminance.illuminance.dark", backgroundColor:"#ffffff", nextState:"turningOn"
-            state "turningOn", label:'${name}', icon:"st.illuminance.illuminance.bright", backgroundColor:"#00A0DC"
+            state "turningOn", label:'${name}', icon:"st.illuminance.illuminance.bright", backgroundColor:"#79b821"
             state "turningOff", label:'${name}', icon:"st.illuminance.illuminance.dark", backgroundColor:"#ffffff"
         }
         valueTile("power", "device.power", decoration: "flat") {
@@ -183,24 +183,24 @@
 		valueTile("hue", "device.hue", inactiveLabel: false, decoration: "flat") {
 			state "hue", label: 'Hue ${currentValue}   '
 		}
-
+        
         main(["switch"])
-        details(["switch",
+        details(["switch", 
-                 "levelSliderControl",
+                 "levelSliderControl", 
-                 "rgbSelector",
+                 "rgbSelector", 
-                 "whiteSliderControl",
+                 "whiteSliderControl", 
                  /*"softwhite",
                  "daylight",
                  "warmwhite",
-                 "red",
+                 "red", 
-                 "green",
+                 "green", 
                  "blue",
                  "white",
                  "cyan",
                  "magenta",
                  "orange",
                  "purple",
-                 "yellow",
+                 "yellow",                 
                  "fireplace",
                  "storm",
                  "deepfade",
@@ -214,7 +214,7 @@
 
 def setAdjustedColor(value) {
 	log.debug "setAdjustedColor: ${value}"
-
+    
     toggleTiles("off") //turn off the hard color tiles
 
     def level = device.latestValue("level")
@@ -223,19 +223,19 @@ def setAdjustedColor(value) {
     log.debug "level is: ${level}"
     value.level = level
 
-	def c = hexToRgb(value.hex)
+	def c = hexToRgb(value.hex) 
 	value.rh = hex(c.r * (level/100))
 	value.gh = hex(c.g * (level/100))
 	value.bh = hex(c.b * (level/100))
-
+	
-    setColor(value)
+    setColor(value)  
 }
 
 def setColor(value) {
 	log.debug "setColor: ${value}"
     log.debug "hue is: ${value.hue}"
     log.debug "saturation is: ${value.saturation}"
-
+    
     if (value.size() < 8)
     	toggleTiles("off")
 
@@ -246,22 +246,22 @@ def setColor(value) {
         value.gh = hex(rgb.g)
         value.bh = hex(rgb.b)
     }
-
+    
     if ((value.size() == 3) && (value.hue != null) && (value.saturation != null) && (value.level)) { //user passed in a level value too from outside (App)
     	def rgb = hslToRGB(value.hue, value.saturation, 0.5)
         value.hex = rgbToHex(rgb)
         value.rh = hex(rgb.r * value.level/100)
         value.gh = hex(rgb.g * value.level/100)
-        value.bh = hex(rgb.b * value.level/100)
+        value.bh = hex(rgb.b * value.level/100)       
     }
-
+    
     if (( value.size() == 1) && (value.hex)) { //being called from outside of device (App) with only hex
 		def rgbInt = hexToRgb(value.hex)
         value.rh = hex(rgbInt.r)
         value.gh = hex(rgbInt.g)
         value.bh = hex(rgbInt.b)
     }
-
+    
     if (( value.size() == 2) && (value.hex) && (value.level)) { //being called from outside of device (App) with only hex and level
 
         def rgbInt = hexToRgb(value.hex)
@@ -269,7 +269,7 @@ def setColor(value) {
         value.gh = hex(rgbInt.g * value.level/100)
         value.bh = hex(rgbInt.b * value.level/100)
     }
-
+    
     if (( value.size() == 1) && (value.colorName)) { //being called from outside of device (App) with only color name
         def colorData = getColorData(value.colorName)
         value.rh = colorData.rh
@@ -277,7 +277,7 @@ def setColor(value) {
         value.bh = colorData.bh
         value.hex = "#${value.rh}${value.gh}${value.bh}"
     }
-
+    
     if (( value.size() == 2) && (value.colorName) && (value.level)) { //being called from outside of device (App) with only color name and level
 		def colorData = getColorData(value.colorName)
         value.rh = hex(colorData.r * value.level/100)
@@ -285,7 +285,7 @@ def setColor(value) {
         value.bh = hex(colorData.b * value.level/100)
         value.hex = "#${hex(colorData.r)}${hex(colorData.g)}${hex(colorData.b)}"
     }
-
+    
     if (( value.size() == 3) && (value.red != null) && (value.green != null) && (value.blue != null)) { //being called from outside of device (App) with only color values (0-255)
         value.rh = hex(value.red)
         value.gh = hex(value.green)
@@ -299,42 +299,36 @@ def setColor(value) {
         value.bh = hex(value.blue * value.level/100)
         value.hex = "#${hex(value.red)}${hex(value.green)}${hex(value.blue)}"
     }
-
+    
-    if(value.hue) {
+	sendEvent(name: "hue", value: value.hue, displayed: false)
-        sendEvent(name: "hue", value: value.hue, displayed: false)
+	sendEvent(name: "saturation", value: value.saturation, displayed: false)
-    }
+	sendEvent(name: "color", value: value.hex, displayed: false)
-    if(value.saturation) {
+	if (value.level) {
-        sendEvent(name: "saturation", value: value.saturation, displayed: false)
+		sendEvent(name: "level", value: value.level)
-    }
+	}
-    if(value.hex?.trim()) {
+	if (value.switch) {
-        sendEvent(name: "color", value: value.hex, displayed: false)
+		sendEvent(name: "switch", value: value.switch)
-    }
+	}
-    if (value.level) {
+	   
-        sendEvent(name: "level", value: value.level)
-    }
-    if (value.switch?.trim()) {
-        sendEvent(name: "switch", value: value.switch)
-    }
-
     sendRGB(value.rh, value.gh, value.bh)
 }
 
 def setLevel(level) {
 	log.debug "setLevel($level)"
-
+    
 	if (level == 0) { off() }
 	else if (device.latestValue("switch") == "off") { on() }
-
+    
     def colorHex = device.latestValue("color")
     if (colorHex == null)
 		colorHex = "#FFFFFF"
-
+        
     def c = hexToRgb(colorHex)
-
+    
     def r = hex(c.r * (level/100))
     def g = hex(c.g * (level/100))
     def b = hex(c.b * (level/100))
-
+    
 	sendEvent(name: "level", value: level)
     sendEvent(name: "setLevel", value: level, displayed: false)
 	sendRGB(r, g, b)
@@ -343,14 +337,14 @@ def setLevel(level) {
 
 def setWhiteLevel(value) {
 	log.debug "setWhiteLevel: ${value}"
-    def level = Math.min(value as Integer, 99)
+    def level = Math.min(value as Integer, 99)    
     level = 255 * level/99 as Integer
     def channel = 0
 
 	if (device.latestValue("switch") == "off") { on() }
-
+    
     sendEvent(name: "whiteLevel", value: value)
-    sendWhite(channel, value)
+    sendWhite(channel, value)       
 }
 
 def sendWhite(channel, value) {
@@ -373,20 +367,20 @@ def sendRGBW(redHex, greenHex, blueHex, whiteHex) {
 
 def configure() {
 	log.debug "Configuring Device For SmartThings Use"
+    
 
-
+    
-
     def cmds = []
-
+    
     // send associate to group 3 to get sensor data reported only to hub
     cmds << zwave.associationV2.associationSet(groupingIdentifier:5, nodeId:[zwaveHubNodeId]).format()
-
+    
-
+    
     //cmds << sendEvent(name: "level", value: 50)
     //cmds << on()
     //cmds << doColorButton("Green")
     delayBetween(cmds, 500)
-
+    
 }
 
 def parse(String description) {
@@ -417,11 +411,11 @@ def parse(String description) {
 
 def getDeviceData() {
     def cmd = []
-
+    
-    cmd << response(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
+    cmd << response(zwave.manufacturerSpecificV2.manufacturerSpecificGet()) 
     cmd << response(zwave.versionV1.versionGet())
 	cmd << response(zwave.firmwareUpdateMdV1.firmwareMdGet())
-
+    
     delayBetween(cmd, 500)
 }
 
@@ -432,7 +426,7 @@ def createEvent(physicalgraph.zwave.commands.manufacturerspecificv2.Manufacturer
     log.debug "productTypeId:    ${cmd.productTypeId}"
 }
 
-def createEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd, Map item1) {
+def createEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd, Map item1) {	
     updateDataValue("applicationVersion", "${cmd.applicationVersion}")
     log.debug "applicationVersion:      ${cmd.applicationVersion}"
     log.debug "applicationSubVersion:   ${cmd.applicationSubVersion}"
@@ -441,13 +435,13 @@ def createEvent(physicalgraph.zwave.commands.versionv1.VersionReport cmd, Map it
     log.debug "zWaveProtocolSubVersion: ${cmd.zWaveProtocolSubVersion}"
 }
 
-def createEvent(physicalgraph.zwave.commands.firmwareupdatemdv1.FirmwareMdReport cmd, Map item1) {
+def createEvent(physicalgraph.zwave.commands.firmwareupdatemdv1.FirmwareMdReport cmd, Map item1) { 
     log.debug "checksum:       ${cmd.checksum}"
     log.debug "firmwareId:     ${cmd.firmwareId}"
     log.debug "manufacturerId: ${cmd.manufacturerId}"
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.colorcontrolv1.CapabilityReport cmd, Map item1) {
+def zwaveEvent(physicalgraph.zwave.commands.colorcontrolv1.CapabilityReport cmd, Map item1) { 
 
 	log.debug "In CapabilityReport"
 }
@@ -552,7 +546,7 @@ def zwaveEvent(physicalgraph.zwave.commands.configurationv1.ConfigurationReport
      def value = "when off"
      if (cmd.configurationValue[0] == 1) {value = "when on"}
      if (cmd.configurationValue[0] == 2) {value = "never"}
-     [name: "indicatorStatus", value: value, displayed: false]
+     [name: "indicatorStatus", value: value, display: false]
 }
 */
 def createEvent(physicalgraph.zwave.Command cmd,  Map map) {
@@ -563,7 +557,7 @@ def createEvent(physicalgraph.zwave.Command cmd,  Map map) {
 def on() {
 	log.debug "on()"
 	sendEvent(name: "switch", value: "on")
-	delayBetween([zwave.basicV1.basicSet(value: 0xFF).format(),
+	delayBetween([zwave.basicV1.basicSet(value: 0xFF).format(), 
     			  zwave.switchMultilevelV1.switchMultilevelGet().format()], 5000)
 }
 
@@ -599,7 +593,7 @@ def refresh() {
  * @return none
  */
 def updateZwaveParam(params) {
-	if ( params ) {
+	if ( params ) {   
         def pNumber = params.paramNumber
         def pSize	= params.size
         def pValue	= [params.value]
@@ -607,9 +601,9 @@ def updateZwaveParam(params) {
 
 		def cmds = []
         cmds << zwave.configurationV1.configurationSet(configurationValue: pValue, parameterNumber: pNumber, size: pSize).format()
-
+        
         cmds << zwave.configurationV1.configurationGet(parameterNumber: pNumber).format()
-        delayBetween(cmds, 1500)
+        delayBetween(cmds, 1500)        
     }
 }
 
@@ -618,22 +612,22 @@ def test() {
     //value = [hue: 0, saturation: 100, level: 5]
     //value = [red: 255, green: 0, blue: 255, level: 60]
 	//setColor(value)
-
+    
     def cmd = []
-
+    
     if ( !state.cnt ) {
     	state.cnt = 6
     } else {
     	state.cnt = state.cnt + 1
     }
-
+    
     if ( state.cnt > 10 )
     	state.cnt = 6
-
+    
     // run programmed light show
 	cmd << zwave.configurationV1.configurationSet(configurationValue: [state.cnt], parameterNumber: 72, size: 1).format()
-    cmd << zwave.configurationV1.configurationGet(parameterNumber: 72).format()
+    cmd << zwave.configurationV1.configurationGet(parameterNumber: 72).format()  
-
+    
     delayBetween(cmd, 500)
 
 }
@@ -644,23 +638,23 @@ def colorNameToRgb(color) {
         [name:"Soft White",	r: 255, g: 241, b: 224	],
         [name:"Daylight", 	r: 255, g: 255, b: 251	],
         [name:"Warm White", r: 255, g: 244, b: 229	],
-
+        
         [name:"Red", 		r: 255, g: 0,	b: 0	],
 		[name:"Green", 		r: 0, 	g: 255,	b: 0	],
         [name:"Blue", 		r: 0, 	g: 0,	b: 255	],
-
+        
 		[name:"Cyan", 		r: 0, 	g: 255,	b: 255	],
-        [name:"Magenta", 	r: 255, g: 0,	b: 33	],
+        [name:"Magenta", 	r: 255, g: 0,	b: 33	],       
         [name:"Orange", 	r: 255, g: 102, b: 0	],
-
+        
         [name:"Purple", 	r: 170, g: 0,	b: 255	],
 		[name:"Yellow", 	r: 255, g: 255, b: 0	],
         [name:"White", 		r: 255, g: 255, b: 255	]
 	]
-
+    
-    def colorData = [:]
+    def colorData = [:]    
     colorData = colors.find { it.name == color }
-
+    
     colorData
 }
 
@@ -676,7 +670,7 @@ def hexToRgb(colorHex) {
 	def rrInt = Integer.parseInt(colorHex.substring(1,3),16)
     def ggInt = Integer.parseInt(colorHex.substring(3,5),16)
     def bbInt = Integer.parseInt(colorHex.substring(5,7),16)
-
+    
     def colorData = [:]
     colorData = [r: rrInt, g: ggInt, b: bbInt]
     colorData
@@ -687,7 +681,7 @@ def rgbToHex(rgb) {
     def g = hex(rgb.g)
     def b = hex(rgb.b)
     def hexColor = "#${r}${g}${b}"
-
+    
     hexColor
 }
 
@@ -695,11 +689,11 @@ def hslToRGB(float var_h, float var_s, float var_l) {
 	float h = var_h / 100
     float s = var_s / 100
     float l = var_l
-
+    
     def r = 0
     def g = 0
     def b = 0
-
+    
 	if (s == 0) {
     	r = l * 255
         g = l * 255
@@ -711,26 +705,26 @@ def hslToRGB(float var_h, float var_s, float var_l) {
         } else {
         	var_2 = (l + s) - (s * l)
         }
-
+                
         float var_1 = 2 * l - var_2
-
+        
         r = 255 * hueToRgb(var_1, var_2, h + (1 / 3))
         g = 255 * hueToRgb(var_1, var_2, h)
-        b = 255 * hueToRgb(var_1, var_2, h - (1 / 3))
+        b = 255 * hueToRgb(var_1, var_2, h - (1 / 3))    
     }
-
+    
     def rgb = [:]
     rgb = [r: r, g: g, b: b]
 
-    rgb
+    rgb 
 }
 
 def hueToRgb(v1, v2, vh) {
-	if (vh < 0) { vh += 1 }
+	if (vh < 0) { vh += 1 }            
 	if (vh > 1) { vh -= 1 }
 	if ((6 * vh) < 1) { return (v1 + (v2 - v1) * 6 * vh) }
     if ((2 * vh) < 1) { return (v2) }
-    if ((3 * vh) < 2) { return (v1 + (v2 - $v1) * ((2 / 3 - vh) * 6)) }
+    if ((3 * vh) < 2) { return (v1 + (v2 - $v1) * ((2 / 3 - vh) * 6)) }    
     return (v1)
 }
 
@@ -741,49 +735,49 @@ def rgbToHSL(rgb) {
     def h = 0
     def s = 0
     def l = 0
-
+    
     def var_min = [r,g,b].min()
     def var_max = [r,g,b].max()
     def del_max = var_max - var_min
-
+    
     l = (var_max + var_min) / 2
-
+    
     if (del_max == 0) {
             h = 0
             s = 0
     } else {
-    	if (l < 0.5) { s = del_max / (var_max + var_min) }
+    	if (l < 0.5) { s = del_max / (var_max + var_min) } 
         else { s = del_max / (2 - var_max - var_min) }
 
         def del_r = (((var_max - r) / 6) + (del_max / 2)) / del_max
         def del_g = (((var_max - g) / 6) + (del_max / 2)) / del_max
         def del_b = (((var_max - b) / 6) + (del_max / 2)) / del_max
 
-        if (r == var_max) { h = del_b - del_g }
+        if (r == var_max) { h = del_b - del_g } 
-        else if (g == var_max) { h = (1 / 3) + del_r - del_b }
+        else if (g == var_max) { h = (1 / 3) + del_r - del_b } 
         else if (b == var_max) { h = (2 / 3) + del_g - del_r }
-
+        
 		if (h < 0) { h += 1 }
         if (h > 1) { h -= 1 }
 	}
-    def hsl = [:]
+    def hsl = [:]    
     hsl = [h: h * 100, s: s * 100, l: l]
-
+    
     hsl
 }
 
 def getColorData(colorName) {
 	log.debug "getColorData: ${colorName}"
-
+    
     def colorRGB = colorNameToRgb(colorName)
     def colorHex = rgbToHex(colorRGB)
 	def colorHSL = rgbToHSL(colorRGB)
-
+        
     def colorData = [:]
-    colorData = [h: colorHSL.h,
+    colorData = [h: colorHSL.h, 
-    			 s: colorHSL.s,
+    			 s: colorHSL.s, 
-                 l: device.latestValue("level"),
+                 l: device.latestValue("level"), 
-                 r: colorRGB.r,
+                 r: colorRGB.r, 
                  g: colorRGB.g,
                  b: colorRGB.b,
                  rh: hex(colorRGB.r),
@@ -791,8 +785,8 @@ def getColorData(colorName) {
                  bh: hex(colorRGB.b),
                  hex: colorHex,
                  alpha: 1]
-
+     
-     colorData
+     colorData                 
 }
 
 def doColorButton(colorName) {
@@ -804,7 +798,7 @@ def doColorButton(colorName) {
     def maxLevel = hex(99)
 
     toggleTiles(colorName.toLowerCase().replaceAll("\\s",""))
-
+    
     if 		( colorName == "Fire Place" ) 	{ updateZwaveParam([paramNumber:72, value:6,  size:1]) }
 	else if ( colorName == "Storm" ) 		{ updateZwaveParam([paramNumber:72, value:7,  size:1]) }
     else if ( colorName == "Deep Fade" ) 	{ updateZwaveParam([paramNumber:72, value:8,  size:1]) }
@@ -814,8 +808,8 @@ def doColorButton(colorName) {
     else if ( colorName == "Daylight" ) 	{ String.format("33050400${maxLevel}02${maxLevel}03${maxLevel}04${maxLevel}%02X", 100) }
     else {
 		def c = getColorData(colorName)
-		def newValue = ["hue": c.h, "saturation": c.s, "level": level, "red": c.r, "green": c.g, "blue": c.b, "hex": c.hex, "alpha": c.alpha]
+		def newValue = ["hue": c.h, "saturation": c.s, "level": level, "red": c.r, "green": c.g, "blue": c.b, "hex": c.hex, "alpha": c.alpha]  
-    	setColor(newValue)
+    	setColor(newValue)            
     	def r = hex(c.r * (level/100))
     	def g = hex(c.g * (level/100))
     	def b = hex(c.b * (level/100))
@@ -829,19 +823,19 @@ def toggleTiles(color) {
 	if ( !state.colorTiles ) {
     	state.colorTiles = ["softwhite","daylight","warmwhite","red","green","blue","cyan","magenta","orange","purple","yellow","white","fireplace","storm","deepfade","litefade","police"]
     }
-
+    
     def cmds = []
-
+    
     state.colorTiles.each({
     	if ( it == color ) {
         	log.debug "Turning ${it} on"
-            cmds << sendEvent(name: it, value: "on${it}", displayed: True, descriptionText: "${device.displayName} ${color} is 'ON'", isStateChange: true)
+            cmds << sendEvent(name: it, value: "on${it}", display: True, descriptionText: "${device.displayName} ${color} is 'ON'", isStateChange: true)
         } else {
         	//log.debug "Turning ${it} off"
         	cmds << sendEvent(name: it, value: "off${it}", displayed: false)
         }
     })
-
+    
     delayBetween(cmds, 2500)
 }
 

devicetypes/smartthings/fibaro-smoke-sensor.src/fibaro-smoke-sensor.groovy

@@ -18,7 +18,6 @@ metadata {
         capability "Sensor"
         capability "Smoke Detector" //attributes: smoke ("detected","clear","tested")
         capability "Temperature Measurement" //attributes: temperature
-        capability "Health Check"
         attribute "tamper", "enum", ["detected", "clear"]
         attribute "heatAlarm", "enum", ["overheat detected", "clear", "rapid temperature rise", "underheat detected"]
         fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x86, 0x72, 0x5A, 0x59, 0x85, 0x73, 0x84, 0x80, 0x71, 0x56, 0x70, 0x31, 0x8E, 0x22, 0x9C, 0x98, 0x7A", outClusters: "0x20, 0x8B"
@@ -340,8 +339,6 @@ def zwaveEvent(physicalgraph.zwave.Command cmd) {
 }
 
 def configure() {
-    // Device wakes up every 4 hours, this interval allows us to miss one wakeup notification before marking offline
-    sendEvent(name: "checkInterval", value: 8 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 // This sensor joins as a secure device if you tripple-click the button to include it
     log.debug "configure() >> isSecured() : ${isSecured()}"
     if (!isSecured()) {

devicetypes/smartthings/fortrezz-water-valve.src/.st-ignore

@@ -1,2 +0,0 @@
-.st-ignore
-README.md

devicetypes/smartthings/fortrezz-water-valve.src/README.md

@@ -1,39 +0,0 @@
-# FortrezZ Water Valve
-
-Cloud Execution
-
-Works with: 
-
-* [FortrezZ Water Valve](https://www.smartthings.com/works-with-smartthings/other/fortrezz-water-valve)
-
-## Table of contents
-
-* [Capabilities](#capabilities)
-* [Health](#device-health)
-* [Troubleshooting](#troubleshooting)
-
-## Capabilities
-
-* **Actuator** - represents that a Device has commands
-* **Health Check** - indicates ability to get device health notifications
-* **Valve** - allows for the control of a valve device
-* **Refresh** - _refresh()_ command for status updates
-* **Sensor** - detects sensor events
-
-## Device Health
-
-FortrezZ Water Valve is polled by the hub.
-As of hubCore version 0.14.38 the hub sends up reports every 15 minutes regardless of whether the state changed.
-Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*15 + 2)mins = 32 mins.
-Not to mention after going OFFLINE when the device is plugged back in, it might take a considerable amount of time for
-the device to appear as ONLINE again. This is because if this listening device does not respond to two poll requests in a row,
-it is not polled for 5 minutes by the hub. This can delay up the process of being marked ONLINE by quite some time.
-
-* __32min__ checkInterval
-
-## Troubleshooting
-
-If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
-Pairing needs to be tried again by placing the device closer to the hub.
-Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
-* [FortrezZ Water Valve Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/202088434-FortrezZ-Water-Valve-Shutoff)

devicetypes/smartthings/fortrezz-water-valve.src/fortrezz-water-valve.groovy

@@ -12,15 +12,13 @@
  *
  */
 metadata {
-	definition (name: "Fortrezz Water Valve", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.watervalve") {
+	definition (name: "Fortrezz Water Valve", namespace: "smartthings", author: "SmartThings") {
 		capability "Actuator"
-		capability "Health Check"
 		capability "Valve"
 		capability "Refresh"
 		capability "Sensor"
-
+        
 		fingerprint deviceId: "0x1000", inClusters: "0x25,0x72,0x86,0x71,0x22,0x70"
-		fingerprint mfr:"0084", prod:"0213", model:"0215", deviceJoinName: "FortrezZ Water Valve"
 	}
 
 	// simulator metadata
@@ -34,17 +32,14 @@ metadata {
 	}
 
 	// tile definitions
-	tiles(scale: 2) {
+	tiles {
-		multiAttributeTile(name:"contact", type: "generic", width: 6, height: 4, canChangeIcon: true){
+		standardTile("contact", "device.contact", width: 2, height: 2, canChangeIcon: true) {
-			tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
+			state "open", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#53a7c0", nextState:"closing"
-				attributeState "open", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#00A0DC", nextState:"closing"
+			state "closed", label: '${name}', action: "valve.open", icon: "st.valves.water.closed", backgroundColor: "#e86d13", nextState:"opening"
-				attributeState "closed", label: '${name}', action: "valve.open", icon: "st.valves.water.closed", backgroundColor: "#ffffff", nextState:"opening"
+			state "opening", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#ffe71e"
-				attributeState "opening", label: '${name}', action: "valve.close", icon: "st.valves.water.open", backgroundColor: "#00A0DC"
+			state "closing", label: '${name}', action: "valve.open", icon: "st.valves.water.closed", backgroundColor: "#ffe71e"
-				attributeState "closing", label: '${name}', action: "valve.open", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
-			}
 		}
-
+		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
-		standardTile("refresh", "device.valve", width: 2, height: 2, inactiveLabel: false, decoration: "flat") {
 			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
 
@@ -53,66 +48,34 @@ metadata {
 	}
 }
 
-def installed(){
-// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-
-	response(refresh())
-}
-
-def updated(){
-// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-}
-
 def parse(String description) {
 	log.trace description
+	def result = null
 	def cmd = zwave.parse(description)
 	if (cmd) {
-		return zwaveEvent(cmd)
+		result = createEvent(zwaveEvent(cmd))
 	}
-	log.debug "Could not parse message"
+	log.debug "Parse returned ${result?.descriptionText}"
-	return null
+	return result
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.switchbinaryv1.SwitchBinaryReport cmd) {
 	def value = cmd.value ? "closed" : "open"
-
+	[name: "contact", value: value, descriptionText: "$device.displayName valve is $value"]
-	return [createEventWithDebug([name: "contact", value: value, descriptionText: "$device.displayName valve is $value"]),
-			createEventWithDebug([name: "valve", value: value, descriptionText: "$device.displayName valve is $value"])]
 }
 
 def zwaveEvent(physicalgraph.zwave.Command cmd) {
-	return createEvent([:]) // Handles all Z-Wave commands we aren't interested in
+	[:] // Handles all Z-Wave commands we aren't interested in
 }
 
 def open() {
-	delayBetween([
+	zwave.switchBinaryV1.switchBinarySet(switchValue: 0x00).format()
-		zwave.switchBinaryV1.switchBinarySet(switchValue: 0x00).format(),
-		zwave.switchBinaryV1.switchBinaryGet().format()
-	], 500)
 }
 
 def close() {
-	delayBetween([
+	zwave.switchBinaryV1.switchBinarySet(switchValue: 0xFF).format()
-		zwave.switchBinaryV1.switchBinarySet(switchValue: 0xFF).format(),
-		zwave.switchBinaryV1.switchBinaryGet().format()
-	], 500)
-}
-
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-	refresh()
 }
 
 def refresh() {
 	zwave.switchBinaryV1.switchBinaryGet().format()
 }
-
-def createEventWithDebug(eventMap) {
-	def event = createEvent(eventMap)
-	log.debug "Event created with ${event?.name}:${event?.value} - ${event?.descriptionText}"
-	return event
-}

devicetypes/smartthings/foscam.src/foscam.groovy

@@ -41,7 +41,7 @@
 
 		standardTile("take", "device.image", width: 1, height: 1, canChangeIcon: false, inactiveLabel: true, canChangeBackground: false) {
 			state "take", label: "Take", action: "Image Capture.take", icon: "st.camera.dropcam", backgroundColor: "#FFFFFF", nextState:"taking"
-			state "taking", label:'Taking', action: "", icon: "st.camera.dropcam", backgroundColor: "#00A0DC"
+			state "taking", label:'Taking', action: "", icon: "st.camera.dropcam", backgroundColor: "#53a7c0"
 			state "image", label: "Take", action: "Image Capture.take", icon: "st.camera.dropcam", backgroundColor: "#FFFFFF", nextState:"taking"
 		}
 

devicetypes/smartthings/ge-link-bulb.src/ge-link-bulb.groovy

@@ -42,7 +42,7 @@
  */
 
 metadata {
-    definition (name: "GE Link Bulb", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
+    definition (name: "GE Link Bulb", namespace: "smartthings", author: "SmartThings") {
 
         capability "Actuator"
         capability "Configuration"
@@ -61,9 +61,9 @@ metadata {
     tiles(scale: 2) {
         multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
             tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-                attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#00a0dc", nextState:"turningOff"
+                attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
                 attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
-                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#00a0dc", nextState:"turningOff"
+                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
                 attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
             }
             tileAttribute ("device.level", key: "SLIDER_CONTROL") {
@@ -87,7 +87,7 @@ metadata {
 def parse(String description) {
     def resultMap = zigbee.getEvent(description)
     if (resultMap) {
-        if (resultMap.name != "level" || resultMap.value != 0) {  // Ignore level reports of 0 sent when bulb turns off
+        if ((resultMap.name == "level" && state.trigger == "setLevel") || resultMap.name != "level") {  //doing this to account for weird level reporting bug with GE Link Bulbs
             sendEvent(resultMap)
         }
     }
@@ -99,7 +99,7 @@ def parse(String description) {
 
 def poll() {
     def refreshCmds = [
-        "st wattr 0x${device.deviceNetworkId} 1 8 0x10 0x21 {${state?.dOnOff ?: '0000'}}", "delay 2000"
+        "st wattr 0x${device.deviceNetworkId} 1 8 0x10 0x21 {${state?.dOnOff ?: '0000'}}", "delay 500"
     ]
 
     return refreshCmds + zigbee.onOffRefresh() + zigbee.levelRefresh()
@@ -188,22 +188,25 @@ def updated() {
 }
 
 def on() {
+    state.trigger = "on/off"
     zigbee.on()
 }
 
 def off() {
+    state.trigger = "on/off"
     zigbee.off()
 }
 
 def refresh() {
     def refreshCmds = [
-        "st wattr 0x${device.deviceNetworkId} 1 8 0x10 0x21 {${state?.dOnOff ?: '0000'}}", "delay 2000"
+        "st wattr 0x${device.deviceNetworkId} 1 8 0x10 0x21 {${state?.dOnOff ?: '0000'}}", "delay 500"
     ]
 
     return refreshCmds + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.onOffConfig()
 }
 
 def setLevel(value) {
+    state.trigger = "setLevel"
     def cmd
     def delayForRefresh = 500
     if (dimRate && (state?.rate != null)) {

devicetypes/smartthings/ge-zigbee-dimmer.src/ge-zigbee-dimmer.groovy

@@ -0,0 +1,351 @@
+/**
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ *	    GE/Jasco ZigBee Dimmer
+ *
+ *	Author: SmartThings
+ *	Date: 2015-07-01
+ */
+
+metadata {
+	definition (name: "GE ZigBee Dimmer", namespace: "smartthings", author: "SmartThings") {
+		capability "Switch"
+		capability "Switch Level"
+		capability "Power Meter"
+		capability "Configuration"
+		capability "Refresh"
+		capability "Actuator"
+		capability "Sensor"
+
+	}
+
+	// simulator metadata
+	simulator {
+		// status messages
+		status "on": "on/off: 1"
+		status "off": "on/off: 0"
+
+		// reply messages
+		reply "zcl on-off on": "on/off: 1"
+		reply "zcl on-off off": "on/off: 0"
+	}
+
+	tiles(scale: 2) {
+		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+				attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
+				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
+				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
+			}
+			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+				attributeState "level", action:"switch level.setLevel"
+			}
+		}
+		valueTile("level", "device.level", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "level", label: 'Level ${currentValue}%'
+		}
+		valueTile("power", "device.power", decoration: "flat", width: 2, height: 2) {
+			state "power", label:'${currentValue} W'
+		}
+		standardTile("refresh", "device.power", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+		main "switch"
+		details(["switch", "level", "power","levelSliderControl","refresh"])
+	}
+}
+
+// Parse incoming device messages to generate events
+def parse(String description) {
+	log.debug "description is $description"
+
+	def finalResult = isKnownDescription(description)
+	if (finalResult != "false") {
+		log.info finalResult
+		if (finalResult.type == "update") {
+			log.info "$device updates: ${finalResult.value}"
+		}
+		else if (finalResult.type == "power") {
+			def powerValue = (finalResult.value as Integer)/10
+			sendEvent(name: "power", value: powerValue)
+
+			/*
+				Dividing by 10 as the Divisor is 10000 and unit is kW for the device. AttrId: 0302 and 0300. Simplifying to 10
+
+				power level is an integer. The exact power level with correct units needs to be handled in the device type
+				to account for the different Divisor value (AttrId: 0302) and POWER Unit (AttrId: 0300). CLUSTER for simple metering is 0702
+			*/
+		}
+		else {
+			sendEvent(name: finalResult.type, value: finalResult.value)
+		}
+	}
+	else {
+		log.warn "DID NOT PARSE MESSAGE for description : $description"
+		log.debug parseDescriptionAsMap(description)
+	}
+}
+
+// Commands to device
+def zigbeeCommand(cluster, attribute){
+	["st cmd 0x${device.deviceNetworkId} ${endpointId} ${cluster} ${attribute} {}"]
+}
+
+def off() {
+	zigbeeCommand("6", "0")
+}
+
+def on() {
+	zigbeeCommand("6", "1")
+}
+
+def setLevel(value) {
+	value = value as Integer
+	if (value == 0) {
+		off()
+	}
+	else {
+		sendEvent(name: "level", value: value)
+		setLevelWithRate(value, "0000") + ["delay 1000"] + on()	//value is between 0 to 100; GE does NOT switch on if OFF
+	}
+}
+
+def refresh() {
+	[
+			"st rattr 0x${device.deviceNetworkId} ${endpointId} 6 0", "delay 500",
+			"st rattr 0x${device.deviceNetworkId} ${endpointId} 8 0", "delay 500",
+			"st rattr 0x${device.deviceNetworkId} ${endpointId} 0x0702 0x0400", "delay 500"
+	]
+
+}
+
+def configure() {
+	onOffConfig() + levelConfig() + powerConfig() + refresh()
+}
+
+
+private getEndpointId() {
+	new BigInteger(device.endpointId, 16).toString()
+}
+
+private hex(value, width=2) {
+	def s = new BigInteger(Math.round(value).toString()).toString(16)
+	while (s.size() < width) {
+		s = "0" + s
+	}
+	s
+}
+
+private String swapEndianHex(String hex) {
+	reverseArray(hex.decodeHex()).encodeHex()
+}
+
+private Integer convertHexToInt(hex) {
+	Integer.parseInt(hex,16)
+}
+
+//Need to reverse array of size 2
+private byte[] reverseArray(byte[] array) {
+	byte tmp;
+	tmp = array[1];
+	array[1] = array[0];
+	array[0] = tmp;
+	return array
+}
+
+def parseDescriptionAsMap(description) {
+	if (description?.startsWith("read attr -")) {
+		(description - "read attr - ").split(",").inject([:]) { map, param ->
+			def nameAndValue = param.split(":")
+			map += [(nameAndValue[0].trim()): nameAndValue[1].trim()]
+		}
+	}
+	else if (description?.startsWith("catchall: ")) {
+		def seg = (description - "catchall: ").split(" ")
+		def zigbeeMap = [:]
+		zigbeeMap += [raw: (description - "catchall: ")]
+		zigbeeMap += [profileId: seg[0]]
+		zigbeeMap += [clusterId: seg[1]]
+		zigbeeMap += [sourceEndpoint: seg[2]]
+		zigbeeMap += [destinationEndpoint: seg[3]]
+		zigbeeMap += [options: seg[4]]
+		zigbeeMap += [messageType: seg[5]]
+		zigbeeMap += [dni: seg[6]]
+		zigbeeMap += [isClusterSpecific: Short.valueOf(seg[7], 16) != 0]
+		zigbeeMap += [isManufacturerSpecific: Short.valueOf(seg[8], 16) != 0]
+		zigbeeMap += [manufacturerId: seg[9]]
+		zigbeeMap += [command: seg[10]]
+		zigbeeMap += [direction: seg[11]]
+		zigbeeMap += [data: seg.size() > 12 ? seg[12].split("").findAll { it }.collate(2).collect {
+			it.join('')
+		} : []]
+
+		zigbeeMap
+	}
+}
+
+def isKnownDescription(description) {
+	if ((description?.startsWith("catchall:")) || (description?.startsWith("read attr -"))) {
+		def descMap = parseDescriptionAsMap(description)
+		if (descMap.cluster == "0006" || descMap.clusterId == "0006") {
+			isDescriptionOnOff(descMap)
+		}
+		else if (descMap.cluster == "0008" || descMap.clusterId == "0008"){
+			isDescriptionLevel(descMap)
+		}
+		else if (descMap.cluster == "0702" || descMap.clusterId == "0702"){
+			isDescriptionPower(descMap)
+		}
+		else {
+			return "false"
+		}
+	}
+	else if(description?.startsWith("on/off:")) {
+		def switchValue = description?.endsWith("1") ? "on" : "off"
+		return	[type: "switch", value : switchValue]
+	}
+	else {
+		return "false"
+	}
+}
+
+def isDescriptionOnOff(descMap) {
+	def switchValue = "undefined"
+	if (descMap.cluster == "0006") {				//cluster info from read attr
+		value = descMap.value
+		if (value == "01"){
+			switchValue = "on"
+		}
+		else if (value == "00"){
+			switchValue = "off"
+		}
+	}
+	else if (descMap.clusterId == "0006") {
+		//cluster info from catch all
+		//command 0B is Default response and the last two bytes are [on/off][success]. on/off=00, success=00
+		//command 01 is Read attr response. the last two bytes are [datatype][value]. boolean datatype=10; on/off value = 01/00
+		if ((descMap.command=="0B" && descMap.raw.endsWith("0100")) || (descMap.command=="01" && descMap.raw.endsWith("1001"))){
+			switchValue = "on"
+		}
+		else if ((descMap.command=="0B" && descMap.raw.endsWith("0000")) || (descMap.command=="01" && descMap.raw.endsWith("1000"))){
+			switchValue = "off"
+		}
+		else if(descMap.command=="07"){
+			return	[type: "update", value : "switch (0006) capability configured successfully"]
+		}
+	}
+
+	if (switchValue != "undefined"){
+		return	[type: "switch", value : switchValue]
+	}
+	else {
+		return "false"
+	}
+
+}
+
+//@return - false or "success" or level [0-100]
+def isDescriptionLevel(descMap) {
+	def dimmerValue = -1
+	if (descMap.cluster == "0008"){
+		//TODO: the message returned with catchall is command 0B with clusterId 0008. That is just a confirmation message
+		def value = convertHexToInt(descMap.value)
+		dimmerValue = Math.round(value * 100 / 255)
+		if(dimmerValue==0 && value > 0) {
+			dimmerValue = 1						//handling for non-zero hex value less than 3
+		}
+	}
+	else if(descMap.clusterId == "0008") {
+		if(descMap.command=="0B"){
+			return	[type: "update", value : "level updated successfully"]					//device updating the level change was successful. no value sent.
+		}
+		else if(descMap.command=="07"){
+			return	[type: "update", value : "level (0008) capability configured successfully"]
+		}
+	}
+
+	if (dimmerValue != -1){
+		return	[type: "level", value : dimmerValue]
+
+	}
+	else {
+		return "false"
+	}
+}
+
+def isDescriptionPower(descMap) {
+	def powerValue = "undefined"
+	if (descMap.cluster == "0702") {
+		if (descMap.attrId == "0400") {
+			powerValue = convertHexToInt(descMap.value)
+		}
+	}
+	else if (descMap.clusterId == "0702") {
+		if(descMap.command=="07"){
+			return	[type: "update", value : "power (0702) capability configured successfully"]
+		}
+	}
+
+	if (powerValue != "undefined"){
+		return	[type: "power", value : powerValue]
+	}
+	else {
+		return "false"
+	}
+}
+
+
+def onOffConfig() {
+	[
+			"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 6 {${device.zigbeeId}} {}", "delay 200",
+			"zcl global send-me-a-report 6 0 0x10 0 600 {01}",
+			"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 1500"
+	]
+}
+
+//level config for devices with min reporting interval as 5 seconds and reporting interval if no activity as 1hour (3600s)
+//min level change is 01
+def levelConfig() {
+	[
+			"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 8 {${device.zigbeeId}} {}", "delay 200",
+			"zcl global send-me-a-report 8 0 0x20 1 3600 {01}",
+			"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 1500"
+	]
+}
+
+//power config for devices with min reporting interval as 1 seconds and reporting interval if no activity as 10min (600s)
+//min change in value is 05
+def powerConfig() {
+	[
+			//Meter (Power) Reporting
+			"zdo bind 0x${device.deviceNetworkId} 1 ${endpointId} 0x0702 {${device.zigbeeId}} {}", "delay 200",
+			"zcl global send-me-a-report 0x0702 0x0400 0x2A 1 600 {05}",
+			"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 1500"
+	]
+}
+
+def setLevelWithRate(level, rate) {
+	if(rate == null){
+		rate = "0000"
+	}
+	level = convertToHexString(level * 255 / 100) 				//Converting the 0-100 range to 0-FF range in hex
+	["st cmd 0x${device.deviceNetworkId} ${endpointId} 8 4 {$level $rate}"]
+}
+
+String convertToHexString(value, width=2) {
+	def s = new BigInteger(Math.round(value).toString()).toString(16)
+	while (s.size() < width) {
+		s = "0" + s
+	}
+	s
+}