MSA-633: Device type for radiators heating control. Could you have a look why response("delay 1200") is not functional when returning it from parse() method? Also example provided in documentation does not work at all. http://docs.smartthings.com/en/latest/device-type-developers-guide/building-z-wave-device-handlers.html#sending-commands-in-response-to-events

2026-03-08 05:31:56 +00:00 · 2015-10-21 06:47:19 -05:00
parent 1965f10584
commit 1fcfd70fa7
1 changed files with 300 additions and 0 deletions
--- a/devicetypes/eurotronic/eurotronic-zwave-thermostatic-valve.src/eurotronic-zwave-thermostatic-valve.groovy
+++ b/devicetypes/eurotronic/eurotronic-zwave-thermostatic-valve.src/eurotronic-zwave-thermostatic-valve.groovy
@@ -0,0 +1,300 @@
+/**
+ *  Copyright 2015 Eurotronic
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+
+metadata {
+	definition (name: "Eurotronic Z-Wave Thermostatic Valve", namespace: "Eurotronic", author: "Eurotronic") {
+		capability "Actuator"
+		capability "Temperature Measurement"
+		capability "Thermostat Heating Setpoint"
+		capability "Thermostat Mode"
+        capability "Thermostat Setpoint"
+		capability "Sensor"
+        capability "Switch Level"
+        
+		command "energySave"
+        command "manual"
+        command "setWakeUpInterval", ["number"]
+        command "setEnergySavingSetpoint", ["number"]
+        
+        attribute "energySavingSetpoint", "number"
+
+		fingerprint deviceId:"0x0806", inClusters:"0x43, 0x40, 0x31, 0x20, 0x26, 0x77, 0x80, 0x84, 0x72, 0x86"
+    }
+    
+	tiles(scale: 1) {
+    	
+		valueTile("temperature", "device.temperature", width: 2, height: 2) {
+			state("a", label:'${currentValue}°', icon: "st.Weather.weather2",
+				backgroundColors:[
+					[value: 0, color: "#153591"],
+					[value: 7, color: "#1e9cbb"],
+					[value: 15, color: "#90d2a7"],
+					[value: 23, color: "#44b621"],
+					[value: 29, color: "#f1d801"],
+					[value: 35, color: "#d04e00"],
+				]
+			)
+		}
+		standardTile("mode", "device.thermostatMode") {
+			state("off", label:'${name}', action:"heat", nextState:"heat", backgroundColor:"#808080", icon:"st.Seasonal Fall.seasonal-fall-008")
+			state("heat", label:'${name}', action:"energySave", nextState:"energy save", backgroundColor:"#fdd470", icon:"st.Seasonal Winter.seasonal-winter-009")
+			state("energy save", label:'save', action:"manual", nextState:"manual", backgroundColor:"#afd574", icon:"st.Transportation.transportation1")
+            state("manual", label: '${name}', action:"off", nextState:"off", backgroundColor:"#8f00ff", icon:"st.Outdoor.outdoor18")
+		}
+        valueTile("battery", "device.battery",  width: 1, height: 1) {
+        	state ("battery", label:'${currentValue}%', unit:"%", icon: "st.Health & Wellness.health9",
+            	backgroundColors:[
+					[value: 0, color: "#ce1010"],
+					[value: 50, color: "#3535ba"],
+					[value: 100, color: "#0d740d"]
+				]
+            )
+    	}
+		controlTile("heatSliderControl", "device.heatingSetpoint", "slider", height: 1, width: 2, range:"(13..50)") {
+			state "a", action:"setHeatingSetpoint", backgroundColor:"#fdd470"
+		}
+		valueTile("heatingSetpoint", "device.heatingSetpoint") {
+			state ("a", label:'${currentValue}°', backgroundColor:"#fdd470")
+		}
+        controlTile("energySavingControl", "device.energySavingSetpoint", "slider", height: 1, width: 2, range:"(13..50)") {
+			state ("a", action:"setEnergySavingSetpoint", backgroundColor:"#afd574")
+		}
+		valueTile("energySavingSetpoint", "device.energySavingSetpoint" ) {
+			state ("a", label:'${currentValue}°', backgroundColor:"#afd574")
+		}
+        controlTile("switchControlSlider", "device.switch", "slider", height: 1, width: 2) {
+			state ("a", action:"setLevel", backgroundColor: "#8f00ff")
+		}
+		valueTile("switchValue", "device.switch") {
+			state ("a", label:'${currentValue}%', backgroundColor:"#8f00ff")
+		}
+        
+		main "temperature"
+		details(["temperature", "mode", "battery", "heatSliderControl", "heatingSetpoint", "energySavingControl", "energySavingSetpoint", "switchControlSlider", "switchValue"])
+	}
+}
+
+def parse(String description)
+{
+	log.debug "Parse description: $description"
+    
+    def result = []
+    
+    if (state.wakeUpInterval != 240 || state.nodeid != zwaveHubNodeId) {
+    	result << response(zwave.wakeUpV2.wakeUpIntervalSet(nodeid: zwaveHubNodeId, seconds: 240))
+        result << response(zwave.wakeUpV2.wakeUpIntervalGet().format())
+    }
+    
+    def zwe = []
+    
+    if (description != "updated") {
+    	zwe = zwaveEvent(zwave.parse(description, [0x20: 1, 0x26: 3, 0x31: 4, 0x40: 2, 0x43: 2, 0x77: 1, 0x80: 1, 0x84: 2, 0x72: 1, 0x86: 1]))    	
+   	}
+    
+    return result + zwe
+}
+
+// Multilevel Switch
+def zwaveEvent(physicalgraph.zwave.commands.switchmultilevelv3.SwitchMultilevelReport cmd){
+	log.debug "Switch multilevel get $cmd"
+    
+    if (cmd.value == 255)
+    	cmd.value = 100
+    
+    return createEvent(name: "switch", value: cmd.value)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.switchmultilevelv3.SwitchMultilevelStartLevelChange cmd){
+	log.debug "SwitchMultilevelStartLevelChange notification $cmd"
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.switchmultilevelv3.SwitchMultilevelStopLevelChange cmd){
+	log.debug "SwitchMultilevelStopLevelChange notification $cmd"
+}
+
+//Multilevel Sensor
+def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv4.SensorMultilevelReport cmd){
+	log.debug "Sensor multilevel get $cmd"
+    def map = [:]
+	if (cmd.sensorType == 1) {
+		map.value = cmd.scaledSensorValue
+		map.unit = cmd.scale
+		map.name = "temperature"
+    }
+    return createEvent(map)
+}
+
+//Thermostat
+def zwaveEvent(physicalgraph.zwave.commands.thermostatmodev2.ThermostatModeReport cmd){
+	log.debug "Thermostat mode notification $cmd"
+    def map = [:]
+	switch (cmd.mode) {
+		case physicalgraph.zwave.commands.thermostatmodev2.ThermostatModeReport.MODE_OFF:
+			map.value = "off"
+			break
+		case physicalgraph.zwave.commands.thermostatmodev2.ThermostatModeReport.MODE_HEAT:
+			map.value = "heat"
+			break
+		case physicalgraph.zwave.commands.thermostatmodev2.ThermostatModeReport.MODE_ENERGY_SAVE_HEAT:
+			map.value = "energy save"
+			break
+		case 0x1F:
+			map.value = "manual"
+			break
+	}
+	map.name = "thermostatMode"
+	return createEvent(map)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.thermostatsetpointv2.ThermostatSetpointReport cmd){
+	log.debug "ThermostatSetpointReport notification $cmd"
+    
+	def map = [:]
+	map.value = cmd.scaledValue
+	map.unit = cmd.scale
+	switch (cmd.setpointType) {
+		case 1:
+			map.name = "heatingSetpoint"
+			break;
+		case 11:
+			map.name = "energySavingSetpoint"
+			break;
+		default:
+			return [:]
+	}
+	// So we can respond with same format
+	state.size = cmd.size
+	state.scale = cmd.scale
+	state.precision = cmd.precision
+	return createEvent(map)
+}
+
+//Battery
+def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd){
+	log.debug "Battery notification $cmd"
+    return createEvent(name: "battery", value: cmd.batteryLevel)
+}
+
+//Wake up
+def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpIntervalReport cmd){
+	log.debug "WakeUpInterval notification $cmd"
+    state.nodeid = cmd.nodeid
+    state.wakeUpInterval = cmd.seconds
+    return createEvent(name: "wakeUpIntervalSeconds", value: cmd.seconds)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd){
+	log.debug "Wake up notification $cmd $state"
+    def result = []
+    
+    if (state.modeCommand) {
+    	result << response(state.modeCommand)
+        result << response(zwave.thermostatModeV2.thermostatModeGet().format())
+        state.modeCommand = null
+    }
+    
+    if (state.setLevelCommand) {
+    	result << response(state.setLevelCommand)
+    	result << response(zwave.switchMultilevelV3.switchMultilevelGet().format())
+        state.setLevelCommand = null
+    }
+    
+    if (state.setHeatingSetpointCommand) {
+    	result << response(state.setHeatingSetpointCommand)
+        result << response(zwave.thermostatSetpointV2.thermostatSetpointGet(setpointType: 1).format())
+    	state.setHeatingSetpointCommand = null
+    }
+    
+    if (state.setEnergySavingSetpointCommand) {
+    	result << response(state.setEnergySavingSetpointCommand)
+        result << response(zwave.thermostatSetpointV2.thermostatSetpointGet(setpointType: 11).format())
+    	state.setEnergySavingSetpointCommand = null
+    }
+    
+    //For some reason response("delay 1200") is not functional which is really bad because hub is 
+    //not able to request all the information from device which it needs. All the commands are
+    //sent at the same time. 
+    result << response(zwave.sensorMultilevelV4.sensorMultilevelGet().format())
+    result << response(zwave.batteryV1.batteryGet().format())
+    result << response(zwave.switchMultilevelV3.switchMultilevelGet().format())
+    //result << response(zwave.thermostatSetpointV2.thermostatSetpointGet(setpointType: 1).format())
+    //result << response(zwave.thermostatSetpointV2.thermostatSetpointGet(setpointType: 11).format())
+    //result << response(zwave.thermostatModeV2.thermostatModeGet().format())
+    result << response(zwave.wakeUpV1.wakeUpNoMoreInformation().format())
+    result
+}
+
+//Unexpected
+def zwaveEvent(physicalgraph.zwave.Command cmd) {
+	log.warn "Unexpected zwave command $cmd"
+}
+
+// Command Implementations
+def off() {
+	log.debug "Thermostat mode setting to off"
+	state.modeCommand = zwave.thermostatModeV2.thermostatModeSet(mode: 0).format()
+}
+
+def heat() {
+	log.debug "Thermostat mode setting to heat"
+    state.modeCommand = zwave.thermostatModeV2.thermostatModeSet(mode: 1).format()
+}
+
+def energySave() {
+	log.debug "Thermostat mode setting to energy save"
+    state.modeCommand = zwave.thermostatModeV2.thermostatModeSet(mode: 11).format()
+}
+
+def manual() {
+	log.debug "Thermostat mode setting to manual"
+    state.modeCommand = zwave.thermostatModeV2.thermostatModeSet(mode: 31).format()
+}
+
+def setLevel(double lvl){    
+    //by Eurotronic specification 100% is 0xFF and 99% is 0x63
+    if (lvl == 100.0)
+    	lvl = 255
+    
+    log.debug "Changing switch level to $lvl"
+
+    state.setLevelCommand = zwave.switchMultilevelV3.switchMultilevelSet(value: 256).format()
+}
+
+def setHeatingSetpoint(double sp){
+	log.debug "Setting setpoint to $sp"
+    
+	def map  = [ 
+    	precision: 		1,
+        scale: 			0,
+        scaledValue:	sp,
+        setpointType:	1,
+        size:			2,
+   	]
+    	
+    state.setHeatingSetpointCommand = zwave.thermostatSetpointV2.thermostatSetpointSet(map).format()
+}
+
+def setEnergySavingSetpoint(double sp){
+	log.debug "Setting energy saving setpoint to $sp"
+    
+    def map  = [ 
+    	precision: 		1,
+        scale: 			0,
+        scaledValue:	sp,
+        setpointType:	11,
+        size:			2,
+   	]
+    	
+    state.setEnergySavingSetpointCommand = zwave.thermostatSetpointV2.thermostatSetpointSet(map).format()
+}