Merge pull request #1894 from SmartThingsCommunity/staging

Rolling up staging to production

devicetypes/keen-home/keen-home-smart-vent.src/keen-home-smart-vent.groovy

@@ -11,7 +11,7 @@ metadata {
         capability "Sensor"
         capability "Temperature Measurement"
         capability "Battery"
-        // capability "Health Check"
+        capability "Health Check"
 
         command "getLevel"
         command "getOnOff"
@@ -476,7 +476,7 @@ def configure() {
 
     // Device-Watch allows 2 check-in misses from device + ping (plus 1 min lag time)
     // enrolls with default periodic reporting until newer 5 min interval is confirmed
-    // sendEvent(name: "checkInterval", value: 2 * 10 * 60 + 2 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+    sendEvent(name: "checkInterval", value: 2 * 10 * 60 + 2 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
     // get ZigBee ID by hidden tile because that's the only way we can do it
     setZigBeeIdTile()

devicetypes/smartthings/aeon-multisensor-gen5.src/aeon-multisensor-gen5.groovy

@@ -100,6 +100,11 @@ metadata {
 	}
 }
 
+def installed(){
+// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated(){
 // Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

devicetypes/smartthings/aeon-siren.src/aeon-siren.groovy

@@ -58,6 +58,11 @@ metadata {
  }
 }
 
+def installed() {
+// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated() {
 // Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

devicetypes/smartthings/cree-bulb.src/cree-bulb.groovy

@@ -15,7 +15,7 @@
  */
 
 metadata {
-    definition (name: "Cree Bulb", namespace: "smartthings", author: "SmartThings") {
+    definition (name: "Cree Bulb", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
 
         capability "Actuator"
         capability "Configuration"

devicetypes/smartthings/dimmer-switch.src/dimmer-switch.groovy

@@ -84,6 +84,11 @@ metadata {
 	}
 }
 
+def installed() {
+	// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated(){
 	// Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

devicetypes/smartthings/econet-vent.src/econet-vent.groovy

@@ -26,13 +26,13 @@ metadata {
 		capability "Sensor"
         capability "Polling"
         capability "Configuration"
-		// capability "Health Check"
+		capability "Health Check"
 
 		command "open"
 		command "close"
 
 		fingerprint deviceId: "0x1100", inClusters: "0x26,0x72,0x86,0x77,0x80,0x20"
-		// fingerprint mfr:"0157", prod:"0100", model:"0100", deviceJoinName: "EcoNet Controls Z-Wave Vent"
+		fingerprint mfr:"0157", prod:"0100", model:"0100", deviceJoinName: "EcoNet Controls Z-Wave Vent"
 	}
 
 	simulator {
@@ -85,10 +85,15 @@ def parse(String description) {
     result
 }
 
+def installed() {
+	// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 //send the command to stop polling
 def updated() {
 	// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	// sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 	response("poll stop")
 }
 

devicetypes/smartthings/fortrezz-water-valve.src/fortrezz-water-valve.groovy

@@ -50,6 +50,11 @@ metadata {
 	}
 }
 
+def installed(){
+// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated(){
 // Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

devicetypes/smartthings/hue-bloom.src/hue-bloom.groovy

@@ -57,10 +57,20 @@ metadata {
 	}
 }
 
-void installed() {
+def initialize() {
 	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}", displayed: false)
 }
 
+void installed() {
+	log.debug "installed()"
+	initialize()
+}
+
+def updated() {
+	log.debug "updated()"
+	initialize()
+}
+
 // parse events into attributes
 def parse(description) {
 	log.debug "parse() - $description"

devicetypes/smartthings/hue-bridge.src/hue-bridge.groovy

@@ -45,10 +45,20 @@ metadata {
 	}
 }
 
-void installed() {
+def initialize() {
 	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}", displayed: false)
 }
 
+void installed() {
+	log.debug "installed()"
+	initialize()
+}
+
+def updated() {
+	log.debug "updated()"
+	initialize()
+}
+
 // parse events into attributes
 def parse(description) {
 	log.debug "Parsing '${description}'"

devicetypes/smartthings/hue-bulb.src/hue-bulb.groovy

@@ -66,10 +66,20 @@ metadata {
 	}
 }
 
-void installed() {
+def initialize() {
 	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}", displayed: false)
 }
 
+void installed() {
+	log.debug "installed()"
+	initialize()
+}
+
+def updated() {
+	log.debug "updated()"
+	initialize()
+}
+
 // parse events into attributes
 def parse(description) {
 	log.debug "parse() - $description"

devicetypes/smartthings/hue-lux-bulb.src/hue-lux-bulb.groovy

@@ -50,10 +50,19 @@ metadata {
     }
 }
 
-void installed() {
+def initialize() {
 	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}", displayed: false)
 }
 
+void installed() {
+	log.debug "installed()"
+	initialize()
+}
+
+def updated() {
+	initialize()
+}
+
 // parse events into attributes
 def parse(description) {
 	log.debug "parse() - $description"

devicetypes/smartthings/hue-white-ambiance-bulb.src/hue-white-ambiance-bulb.groovy

@@ -55,10 +55,20 @@ metadata {
     }
 }
 
-void installed() {
+def initialize() {
 	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"LAN\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device.hub.hardwareID}\"}", displayed: false)
 }
 
+void installed() {
+    log.debug "installed()"
+    initialize()
+}
+
+def updated() {
+    log.debug "updated()"
+    initialize()
+}
+
 // parse events into attributes
 def parse(description) {
     log.debug "parse() - $description"

devicetypes/smartthings/lifx-color-bulb.src/lifx-color-bulb.groovy

@@ -5,7 +5,7 @@
  *
  */
 metadata {
-	definition (name: "LIFX Color Bulb", namespace: "smartthings", author: "LIFX") {
+	definition (name: "LIFX Color Bulb", namespace: "smartthings", author: "LIFX", ocfDeviceType: "oic.d.light") {
 		capability "Actuator"
 		capability "Color Control"
 		capability "Color Temperature"
@@ -64,8 +64,18 @@ metadata {
 	}
 }
 
+def initialize() {
+	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"cloud\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device?.hub?.hardwareID}\"}", displayed: false)
+}
+
 void installed() {
-	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"cloud\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device?.hub?.hardwareID}\"}")
+	log.debug "installed()"
+	initialize()
+}
+
+def updated() {
+	log.debug "updated()"
+	initialize()
 }
 
 // handle commands
@@ -190,7 +200,7 @@ def off() {
 
 def refresh() {
 	log.debug "Executing 'refresh'"
-	
+
 	def resp = parent.apiGET("/lights/${selector()}")
 	if (resp.status == 404) {
 		state.online = false

devicetypes/smartthings/lifx-white-bulb.src/lifx-white-bulb.groovy

@@ -5,7 +5,7 @@
  *
  */
 metadata {
-	definition (name: "LIFX White Bulb", namespace: "smartthings", author: "LIFX") {
+	definition (name: "LIFX White Bulb", namespace: "smartthings", author: "LIFX", ocfDeviceType: "oic.d.light") {
 		capability "Actuator"
 		capability "Color Temperature"
 		capability "Switch"
@@ -55,8 +55,18 @@ metadata {
 	}
 }
 
+def initialize() {
+	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"cloud\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device?.hub?.hardwareID}\"}", displayed: false)
+}
+
 void installed() {
-	sendEvent(name: "DeviceWatch-Enroll", value: "{\"protocol\": \"cloud\", \"scheme\":\"untracked\", \"hubHardwareId\": \"${device?.hub?.hardwareID}\"}")
+	log.debug "installed()"
+	initialize()
+}
+
+def updated() {
+	log.debug "updated()"
+	initialize()
 }
 
 // handle commands
@@ -119,7 +129,7 @@ def off() {
 
 def refresh() {
 	log.debug "Executing 'refresh'"
-	
+
 	def resp = parent.apiGET("/lights/${selector()}")
 	if (resp.status == 404) {
 		state.online = false

devicetypes/smartthings/logitech-harmony-hub-c2c.src/logitech-harmony-hub-c2c.groovy

@@ -1,3 +1,4 @@
+import groovy.json.JsonOutput
 /**
  *  Logitech Harmony Hub
  *
@@ -7,6 +8,7 @@ metadata {
 	definition (name: "Logitech Harmony Hub C2C", namespace: "smartthings", author: "SmartThings") {
 		capability "Media Controller"
         capability "Refresh"
+		capability "Health Check"
         
         command "activityoff"   
         command "alloff" 
@@ -38,6 +40,20 @@ metadata {
 	}
 }
 
+def initialize() {
+	sendEvent(name: "DeviceWatch-Enroll", value: JsonOutput.toJson([protocol: "cloud", scheme:"untracked"]), displayed: false)
+}
+
+def installed() {
+	log.debug "installed()"
+	initialize()
+}
+
+def updated() {
+	log.debug "updated()"
+	initialize()
+}
+
 def startActivity(String activityId) {
 	log.debug "Executing 'Start Activity'"
 	log.trace parent.activity("$device.deviceNetworkId-$activityId","start")    
@@ -58,6 +74,10 @@ def poll() {
 	log.trace parent.poll()
 }
 
+def ping() {
+	refresh()
+}
+
 def refresh() {
 	log.debug "Executing 'Refresh'"
 	log.trace parent.poll()

devicetypes/smartthings/rgbw-light.src/rgbw-light.groovy

@@ -17,7 +17,7 @@
  */
 
 metadata {
-	definition (name: "RGBW Light", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "RGBW Light", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
 		capability "Switch Level"
 		capability "Color Control"
 		capability "Color Temperature"

devicetypes/smartthings/smartsense-moisture.src/smartsense-moisture.groovy

@@ -91,6 +91,11 @@ def parse(String description) {
 	return result
 }
 
+def installed() {
+	// Device-Watch simply pings if no device events received for 482min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 4 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated() {
 	// Device-Watch simply pings if no device events received for 482min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 4 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy

@@ -135,10 +135,7 @@ def refresh() {
 	return zigbee.readAttribute(0xFC45, 0x0000, ["mfgCode": 0x104E]) +   // New firmware
 			zigbee.readAttribute(0xFC45, 0x0000, ["mfgCode": 0xC2DF]) +   // Original firmware
 			zigbee.readAttribute(zigbee.TEMPERATURE_MEASUREMENT_CLUSTER, 0x0000) +
-			zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x0020) +
-			zigbee.configureReporting(0xFC45, 0x0000, DataType.INT16, 30, 3600, 100) +
-			zigbee.batteryConfig() +
-			zigbee.temperatureConfig(30, 300)
+			zigbee.readAttribute(zigbee.POWER_CONFIGURATION_CLUSTER, 0x0020)
 }
 
 def configure() {
@@ -150,5 +147,10 @@ def configure() {
 
 	// temperature minReportTime 30 seconds, maxReportTime 5 min. Reporting interval if no activity
 	// battery minReport 30 seconds, maxReportTime 6 hrs by default
-	return refresh()
+	return refresh() +
+			zigbee.configureReporting(0xFC45, 0x0000, DataType.UINT16, 30, 3600, 100, ["mfgCode": 0x104E]) +   // New firmware
+			zigbee.configureReporting(0xFC45, 0x0000, DataType.UINT16, 30, 3600, 100, ["mfgCode": 0xC2DF]) +   // Original firmware
+			zigbee.batteryConfig() +
+			zigbee.temperatureConfig(30, 300)
+
 }

devicetypes/smartthings/sylvania-ultra-iq.src/sylvania-ultra-iq.groovy

@@ -15,7 +15,7 @@
 //DEPRECATED - Using the generic DTH for this device. Users need to be moved before deleting this DTH
 
 metadata {
-	definition (name: "Sylvania Ultra iQ", namespace:"smartthings", author: "SmartThings") {
+	definition (name: "Sylvania Ultra iQ", namespace:"smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
 		capability "Switch Level"
 		capability "Configuration"
 		capability "Switch"

devicetypes/smartthings/wattvision.src/wattvision.groovy

@@ -20,6 +20,7 @@ metadata {
 	definition(name: "Wattvision", namespace: "smartthings", author: "Steve Vlaminck") {
 		capability "Power Meter"
 		capability "Refresh"
+		capability "Sensor"
 		attribute "powerContent", "string"
 	}
 

devicetypes/smartthings/zigbee-dimmer-power.src/zigbee-dimmer-power.groovy

@@ -13,7 +13,7 @@
  */
 
 metadata {
-    definition (name: "ZigBee Dimmer Power", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.switch") {
+    definition (name: "ZigBee Dimmer Power", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
         capability "Actuator"
         capability "Configuration"
         capability "Refresh"

devicetypes/smartthings/zigbee-dimmer.src/zigbee-dimmer.groovy

@@ -13,7 +13,7 @@
  */
 
 metadata {
-    definition (name: "ZigBee Dimmer", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.switch") {
+    definition (name: "ZigBee Dimmer", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
         capability "Actuator"
         capability "Configuration"
         capability "Refresh"

devicetypes/smartthings/zigbee-lock.src/README.md

@@ -0,0 +1,46 @@
+# Zigbee Lock
+
+Cloud Execution
+
+Works with: 
+
+* [Yale Push Button Deadbolt (YRD210-HA)](https://www.smartthings.com/works-with-smartthings/door-locks/yale-push-button-deadbolt-yrd210)
+* [Yale Touchscreen Lever (YRL220-ZB)](https://www.smartthings.com/works-with-smartthings/door-locks/yale-touchscreen-lever-yrl220)
+* [Yale Touchscreen Deadbolt (YRD220-HA))](https://www.smartthings.com/works-with-smartthings/door-locks/yale-touchscreen-deadbolt-yrd220)
+* [Yale Key Free Touchscreen Deadbolt (YRD240-HA)](https://www.smartthings.com/works-with-smartthings/door-locks/yale-key-free-touchscreen-deadbolt-yrd240)
+* [Yale Push Button Lever Lock (YRL210-HA)](https://www.smartthings.com/works-with-smartthings/door-locks/yale-push-button-lever-lock-yrl210)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Battery](#battery-specification)
+* [Troubleshooting](#troubleshooting)
+
+## Capabilities
+
+* **Actuator** - represents that a Device has commands
+* **Lock** - allows for the control of a lock device
+* **Refresh** - _refresh()_ command for status updates
+* **Sensor** - detects sensor events
+* **Battery** - defines device uses a battery
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+Yale Push Button Deadbolt (YRD210-HA) is a Zigbee device and checks in every 1 hour.
+Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*60 + 2)mins = 122 mins.
+
+ * __122min__ checkInterval
+
+## Battery Specification
+
+Four AA 1.5V batteries are required.
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
+Pairing needs to be tried again by placing the device closer to the hub.
+Instructions related to pairing, resetting and removing the sensor from SmartThings can be found in the following link:
+* [Yale Locks Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/205138400)

devicetypes/smartthings/zigbee-lock.src/zigbee-lock.groovy

@@ -24,6 +24,7 @@ import physicalgraph.zigbee.zcl.DataType
         capability "Sensor"
         capability "Battery"
         capability "Configuration"
+        capability "Health Check"
 
         fingerprint profileId: "0104", inClusters: "0000,0001,0003,0004,0005,0009,0020,0101,0402,0B05,FDBD", outClusters: "000A,0019", manufacturer: "Kwikset", model: "SMARTCODE_DEADBOLT_5", deviceJoinName: "Kwikset 5-Button Deadbolt"
         fingerprint profileId: "0104", inClusters: "0000,0001,0003,0004,0005,0009,0020,0101,0402,0B05,FDBD", outClusters: "000A,0019", manufacturer: "Kwikset", model: "SMARTCODE_LEVER_5", deviceJoinName: "Kwikset 5-Button Lever"
@@ -83,6 +84,9 @@ def uninstalled() {
 }
 
 def configure() {
+    // Device-Watch allows 2 check-in misses from device + ping (plus 2 min lag time)
+    sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
+
     def cmds =
         zigbee.configureReporting(CLUSTER_DOORLOCK, DOORLOCK_ATTR_LOCKSTATE,
                                   DataType.ENUM8, 0, 3600, null) +
@@ -92,6 +96,13 @@ def configure() {
     return refresh() + cmds // send refresh cmds as part of config
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+    zigbee.readAttribute(CLUSTER_DOORLOCK, DOORLOCK_ATTR_LOCKSTATE)
+}
+
 def refresh() {
     def cmds =
         zigbee.readAttribute(CLUSTER_DOORLOCK, DOORLOCK_ATTR_LOCKSTATE) +

devicetypes/smartthings/zwave-dimmer-switch-generic.src/zwave-dimmer-switch-generic.groovy

@@ -12,7 +12,7 @@
  *
  */
 metadata {
-	definition (name: "Z-Wave Dimmer Switch Generic", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.switch") {
+	definition (name: "Z-Wave Dimmer Switch Generic", namespace: "smartthings", author: "SmartThings", ocfDeviceType: "oic.d.light") {
 		capability "Switch Level"
 		capability "Actuator"
 		capability "Health Check"
@@ -78,6 +78,11 @@ metadata {
 	}
 }
 
+def installed(){
+// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated(){
 // Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

devicetypes/smartthings/zwave-door-window-sensor.src/zwave-door-window-sensor.groovy

@@ -79,6 +79,11 @@ def parse(String description) {
 	return result
 }
 
+def installed() {
+	// Device-Watch simply pings if no device events received for 482min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 4 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated() {
 	// Device-Watch simply pings if no device events received for 482min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 4 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

devicetypes/smartthings/zwave-garage-door-opener.src/zwave-garage-door-opener.groovy

@@ -65,6 +65,11 @@ metadata {
 
 import physicalgraph.zwave.commands.barrieroperatorv1.*
 
+def installed(){
+// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated(){
 // Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

devicetypes/smartthings/zwave-lock.src/zwave-lock.groovy

@@ -68,6 +68,11 @@ metadata {
 import physicalgraph.zwave.commands.doorlockv1.*
 import physicalgraph.zwave.commands.usercodev1.*
 
+def installed() {
+	// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated() {
 	// Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

devicetypes/smartthings/zwave-metering-dimmer.src/zwave-metering-dimmer.groovy

@@ -25,11 +25,13 @@ metadata {
 		capability "Switch Level"
 		capability "Sensor"
 		capability "Actuator"
+		capability "Health Check"
 		capability "Light"
 
 		command "reset"
 
 		fingerprint inClusters: "0x26,0x32"
+		fingerprint mfr:"0086", prod:"0003", model:"001B", deviceJoinName: "Aeon Labs Micro Smart Dimmer 2E"
 	}
 
 	simulator {
@@ -98,7 +100,15 @@ def parse(String description) {
     result
 }
 
+def installed() {
+	// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated() {
+	// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+
 	response(refresh())
 }
 
@@ -163,6 +173,14 @@ def poll() {
 	], 1000)
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+	log.debug "ping() called"
+	refresh()
+}
+
 def refresh() {
 	delayBetween([
 		zwave.switchMultilevelV1.switchMultilevelGet().format(),

devicetypes/smartthings/zwave-metering-switch.src/zwave-metering-switch.groovy

@@ -74,6 +74,11 @@ metadata {
 	}
 }
 
+def installed() {
+	// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated() {
 	// Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

devicetypes/smartthings/zwave-motion-sensor.src/zwave-motion-sensor.groovy

@@ -51,7 +51,12 @@ metadata {
 	}
 }
 
-def updated(){
+def installed() {
+// Device wakes up every 4 hours, this interval allows us to miss one wakeup notification before marking offline
+	sendEvent(name: "checkInterval", value: 8 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
+def updated() {
 // Device wakes up every 4 hours, this interval allows us to miss one wakeup notification before marking offline
 	sendEvent(name: "checkInterval", value: 8 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 }

devicetypes/smartthings/zwave-siren.src/README.md

@@ -1,42 +0,0 @@
-# Z-wave Siren
-
-Cloud Execution
-
-Works with: 
-
-* [FortrezZ Siren Strobe Alarm](https://www.smartthings.com/works-with-smartthings/other/fortrezz-water-valve)
-
-## Table of contents
-
-* [Capabilities](#capabilities)
-* [Health](#device-health)
-* [Troubleshooting](#troubleshooting)
-
-## Capabilities
-
-* **Actuator** - represents that a Device has commands
-* **Alarm** - allows for interacting with devices that serve as alarms
-* **Battery** - defines device uses a battery
-* **Health Check** - indicates ability to get device health notifications
-* **Polling** - represents that poll() can be implemented for the device
-* **Refresh** - _refresh()_ command for status updates
-* **Sensor** - detects sensor events
-* **Switch** - can detect state (possible values: on/off)
-
-## Device Health
-
-FortrezZ Siren Strobe Alarm is polled by the hub.
-As of hubCore version 0.14.38 the hub sends up reports every 15 minutes regardless of whether the state changed.
-Device-Watch allows 2 check-in misses from device plus some lag time. So Check-in interval = (2*15 + 2)mins = 32 mins.
-Not to mention after going OFFLINE when the device is plugged back in, it might take a considerable amount of time for
-the device to appear as ONLINE again. This is because if this listening device does not respond to two poll requests in a row,
-it is not polled for 5 minutes by the hub. This can delay up the process of being marked ONLINE by quite some time.
-
-* __32min__ checkInterval
-
-## Troubleshooting
-
-If the device doesn't pair when trying from the SmartThings mobile app, it is possible that the device is out of range.
-Pairing needs to be tried again by placing the device closer to the hub.
-Instructions related to pairing, resetting and removing the device from SmartThings can be found in the following link:
-* [FortrezZ Siren Strobe Alarm Troubleshooting Tips](https://support.smartthings.com/hc/en-us/articles/202294760-FortrezZ-Siren-Strobe-Alarm)

devicetypes/smartthings/zwave-siren.src/zwave-siren.groovy

@@ -20,7 +20,6 @@ metadata {
 		capability "Actuator"
         capability "Alarm"
         capability "Battery"
-		capability "Health Check"
         capability "Polling"
         capability "Refresh"
         capability "Sensor"
@@ -28,7 +27,6 @@ metadata {
 
 
 		fingerprint inClusters: "0x20,0x25,0x86,0x80,0x85,0x72,0x71"
-		fingerprint mfr:"0084", prod:"0313", model:"010B", deviceJoinName: "FortrezZ Siren Strobe Alarm"
 	}
 
 	simulator {
@@ -60,11 +58,6 @@ metadata {
 	}
 }
 
-def updated(){
-// Device-Watch simply pings if no device events received for 32min(checkInterval)
-	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
-}
-
 def createEvents(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
 	def map = [ name: "battery", unit: "%" ]
 	if (cmd.batteryLevel == 0xFF) {
@@ -126,13 +119,6 @@ def both() {
 	on()
 }
 
-/**
- * PING is used by Device-Watch in attempt to reach the Device
- * */
-def ping() {
-	refresh()
-}
-
 def refresh() {
 	log.debug "sending battery refresh command"
 	zwave.batteryV1.batteryGet().format()

devicetypes/smartthings/zwave-smoke-alarm.src/zwave-smoke-alarm.groovy

@@ -53,7 +53,12 @@ metadata {
 	}
 }
 
-def updated(){
+def installed() {
+// Device checks in every hour, this interval allows us to miss one check-in notification before marking offline
+	sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
+def updated() {
 // Device checks in every hour, this interval allows us to miss one check-in notification before marking offline
 	sendEvent(name: "checkInterval", value: 2 * 60 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
 }

devicetypes/smartthings/zwave-switch-generic.src/zwave-switch-generic.groovy

@@ -61,6 +61,11 @@ metadata {
 	}
 }
 
+def installed(){
+// Device-Watch simply pings if no device events received for checkInterval duration of 32min = 2 * 15min + 2min lag time
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated(){
 // Device-Watch simply pings if no device events received for checkInterval duration of 32min = 2 * 15min + 2min lag time
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

devicetypes/smartthings/zwave-switch.src/zwave-switch.groovy

@@ -65,6 +65,11 @@ metadata {
 	}
 }
 
+def installed() {
+	// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated(){
 		// Device-Watch simply pings if no device events received for 32min(checkInterval)
 		sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

devicetypes/smartthings/zwave-thermostat.src/zwave-thermostat.groovy

@@ -124,6 +124,11 @@ metadata {
 	}
 }
 
+def installed(){
+	// Device-Watch simply pings if no device events received for 32min(checkInterval)
+	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])
+}
+
 def updated(){
 	// Device-Watch simply pings if no device events received for 32min(checkInterval)
 	sendEvent(name: "checkInterval", value: 2 * 15 * 60 + 2 * 60, displayed: false, data: [protocol: "zwave", hubHardwareId: device.hub.hardwareID])

smartapps/smartthings/logitech-harmony-connect.src/logitech-harmony-connect.groovy

@@ -511,6 +511,10 @@ def pollResponse(response, data) {
 			if (ResponseValues) {
         def map = [:]
         ResponseValues.hubs.each {
+        // Device-Watch relies on the Logitech Harmony Cloud to get the Device state.
+        def isAlive = it.value.status
+        def d = getChildDevice("harmony-${it.key}")
+        d?.sendEvent(name: "DeviceWatch-DeviceStatus", value: isAlive!=504? "online":"offline", displayed: false, isStateChange: true)
         if (it.value.message == "OK") {
               map["${it.key}"] = "${it.value.response.data.currentAvActivity},${it.value.response.data.activityStatus}"
               def hub = getChildDevice("harmony-${it.key}")