boggebe
bd9a1d1dc5
Closure was causing sandbox issues locally
2016-02-08 16:03:01 -06:00
Daniel Kurin
b7484ff0b8
MSA-866: Currently, the SmartSense Moisture handles both the FortrezZ WWA01 and the '02, however the '02 sends a temperature measurement. This PR expands the existing DH to add a valueTile with that temperature data (per https://github.com/SmartThingsCommunity/SmartThingsPublic/pull/447 )
2016-02-07 11:36:24 -05:00
rboy1
6fe60146a4
Bugfixes for codeReports
...
1. Missing break in case 32 for AlarmReport
2. Bugfix - Not reporting all codes programmed into the lock causing SmartApps to fail while awaiting a codeReport notification (once a code is programmed into a lock it should be notified because there is no way to read back codes from the lock, apps awaiting a codeReport will go into an infinite programming loop to trying to update the codes and awaiting a codeReport notification indicating a successful programming)
2016-02-02 10:35:10 -05:00
Tom Manley
5ec82217ac
multi: Fix occasional failures in sending ZigBee commands during configure
...
The missing delay after some of the commands was sometimes causing the
ZigBee command to fail.
Resolves:
https://smartthings.atlassian.net/browse/DVCSMP-1225
2016-01-29 14:41:12 -06:00
Kris Schaller
208f0d97df
Merging staging into production
2016-01-25 13:12:05 -08:00
Vinay Rao
7147770e2d
updating fingerprint for the problem device
2016-01-21 18:20:03 -08:00
Vinay Rao
9f75bbfbde
Merge pull request #463 from SmartThingsCommunity/staging
...
Merging changes into prod from staging
2016-01-20 17:13:25 -08:00
Jason Botello
5eb33eca19
Merge pull request #387 from SmartThingsCommunity/MSA-757-1
...
MSA-757: Timevalve Smart
2016-01-20 16:25:05 -08:00
Jason Botello
ec321ce85d
Merge pull request #425 from hhhss91/MSA-786-1
...
MSA-786: Encored Technologies : Smart Energy Service
2016-01-20 16:24:46 -08:00
Jason Botello
7669bec0bc
Update timevalve-smart.groovy
...
Commenting out fingerprint temporarily to avoid potential conflicts with other devices as this devices is specifically for a Korean deployment in AP01 - see DVCSMP-1425
2016-01-20 16:17:32 -08:00
vlaminck
efabd07dea
Added Gentle Wake Up controller, updated SmartApp
2016-01-20 09:05:47 -06:00
Vinay Rao
16b87c5eda
Merge pull request #456 from SmartThingsCommunity/staging
...
Merging changes into prod from staging
2016-01-19 16:10:44 -08:00
Vinay Rao
12b18eae08
deprecating this DTH as the fingerprints have been moved to ZigBee RGBW Bulb
2016-01-19 16:02:35 -08:00
Vinay Rao
0a6bb51974
Merge pull request #453 from SmartThingsCommunity/staging
...
Merging ZigBee RGBW into prod
2016-01-19 15:57:18 -08:00
Vinay Rao
b11b362c60
Adding ZigBee RGBW DTH
2016-01-19 15:40:43 -08:00
Tom Manley
8f08a0819c
Merge pull request #449 from SmartThingsCommunity/staging
...
Merge staging into production
2016-01-19 14:25:26 -06:00
Tom Manley
968834e33e
Use table for battery voltage to percent remaining calculation
...
The new table based approach yields a more accurate battery percentage
remaining than the old linear calculation.
Resolves:
https://smartthings.atlassian.net/browse/SMJN-39
2016-01-19 13:40:02 -06:00
Tom Manley
e51a38eb28
Fix whitespace issues - no code changes
...
Replaced spaces with tabs for indentation and removed some unnecessary
white space.
2016-01-18 11:00:37 -06:00
Tom Manley
553b45a3f3
Merge pull request #441 from tpmanley/bugfix/arrival_readattr_events
...
arrival: Keep 'read attr' messages from being turned into events
2016-01-15 09:51:39 -06:00
Tom Manley
d9ab3bca00
arrival: Keep 'read attr' messages from being turned into events
...
Previously parse was returning null which causes the platform to create an event
using the message passed to parse. We don't want that to happen so return
an empty list instead.
Resolves:
https://smartthings.atlassian.net/browse/SMJN-38
2016-01-14 15:34:08 -06:00
Tom Manley
5085d7f184
Merge pull request #433 from SmartThingsCommunity/staging
...
Merge staging into production
2016-01-13 12:56:38 -06:00
Lee Joonmin
3a7abd6169
Modifying 'Timevalve Smart'
2016-01-12 18:01:23 -06:00
Will Price
783a30fa5f
MSA-794: We submitted this ages ago when the review process took the better part of a year. Resubmitting here with minor changes based your recent email requesting all OAuth apps be submitted, please expedite ASAP as we have a huge number of users using the OAuth app.
...
These apps integrate SmartThings with Simple Control for Audio Video control. They are in use by a great many users already and quite well tested.
2016-01-11 15:50:14 -06:00
Matt Pennig
d69abb64bd
Merge pull request #385 from SmartThingsCommunity/rich-simulated-thermostat
...
Adding multiAttributeTile definition to Simulated Thermostat device type handler
2016-01-11 15:10:59 -06:00
Tom Manley
7429ecc83b
Merge pull request #423 from tpmanley/feature/arrival_sensor_ha
...
arrival: Add support for ZigBee HA arrival sensor
2016-01-11 12:42:44 -06:00
Tom Manley
112a35f5db
arrival: Change voltage range for battery remaining calculation
2016-01-11 12:41:50 -06:00
Juan Risso
26ab32565b
Increased delay to mark device as offline
2016-01-08 16:01:57 -05:00
hyeon seok yang
c20026b376
MSA-786: Description from the app : "With visible realtime energy usage status, have good energy habits and enrich your life"
...
This app is specialized to show energy data which was grabbed from Encored Technologies' device that user installed at their home.
2016-01-08 16:01:05 +09:00
Tom Manley
9733947fea
arrival: Add support for ZigBee HA arrival sensor
...
Resolves:
https://smartthings.atlassian.net/browse/DVCSMP-1305
https://smartthings.atlassian.net/browse/DVCSMP-1322
2016-01-07 14:30:04 -06:00
Yaima
6abf8c7f20
Merge pull request #420 from Yaima/master
...
Removed degree sign from tile
2016-01-06 15:25:19 -08:00
Yaima Valdivia
fe505ddc9f
Removed degree sign from tile
...
https://smartthings.atlassian.net/browse/DVCSMP-1318
2016-01-06 15:24:47 -08:00
Tom Manley
c1c2431299
multi: Adjust threshold multiplier to prevent motion detection while idle
...
The previous threshold multiplier was found to be too low so motion was
being detected while the sensor was idle. This new value of 630 seems to
produce better results.
2016-01-06 13:27:48 -06:00
Tom Manley
39f0c49ea6
Merge pull request #411 from tpmanley/bugfix/multi_accel_parsing
...
multi: Fix x,y,z parsing error
2016-01-06 13:26:27 -06:00
Yaima
70b8a042a7
Merge pull request #415 from SmartThingsCommunity/staging
...
Merging to prod
2016-01-05 16:01:55 -08:00
Yaima Valdivia
8453292038
Added canChangeIcon: true
2016-01-05 15:59:14 -08:00
Tom Manley
e98a04a1b4
multi: Fix x,y,z parsing error
...
The previous axis value parsing code was very fragile. For example, this
code block:
def unsignedY = hexToInt(part.split("13")[1].trim())
would fail when `part` was "13xx13", where "xx" is any value. The split
assumed the value "13" was present only once in the string, and everything
after the "13" was the value. When "13" was part of the value this code
would interpret only "xx" as the value, instead of "xx13".
The new parsing code is not fragile like this. It knows exactly what bytes
of the string are X, Y, and Z and parses the values correctly.
2016-01-04 15:21:55 -06:00
Kris Schaller
22c810e9df
Merging staging into production
2016-01-04 03:43:46 -08:00
Tom Manley
837d2d0cfd
multi: ignore attribute reports that don't include all three axis
...
Resolves:
https://smartthings.atlassian.net/browse/DVCSMP-1366
2015-12-31 11:13:41 -06:00
Kris Schaller
71f9f19465
Merging staging into production
2015-12-28 10:31:40 -08:00
Lee Joonmin
7def620f04
MSA-757: Smart Gas-Lock work with z-wave
2015-12-23 03:44:19 -06:00
umangparekh
3ea70fecad
Fine-tuning the Motion Threshold and Motion Threshold multiplier for manufacturer Smarthings.
...
Garage Door use case works + implemented code review feedback
Implementing code review feedback + inverted the signedY to match Centralite like behavior.
Implementing code review feedback + inverted the signedY to match Centralite like behavior.
2015-12-22 19:33:06 -08:00
Matt Pennig
358cf261e8
Adding multiAttributeTile definition to Simulated Thermostat device type handler
2015-12-22 11:14:53 -06:00
Kris Schaller
2edda411e2
Merging staging into production
2015-12-21 12:55:20 -08:00
Vinay Rao
f3138501e8
commenting out unused variables
2015-12-16 11:34:35 +05:30
obycode
177c816348
MSA-747: BeaconThings is a simple app to let you integrate iBeacons into your SmartThings smart home. With BeaconThings, you can get more reliable, and more specific location information. Spread some beacons around your home, register them with BeaconThings, and it will tell SmartThings when you're nearby. For each BeaconThing your register, a device is added to SmartThings that can be used with SmartRules, or custom SmartApps, to trigger events.
...
This submission contains the SmartApp to which the iOS app connects with OAuth, and the device type which is created by the SmartApp for each beacon registered in the app.
2015-12-15 10:46:27 -06:00
snakedog116
9be808a3eb
Update ecobee-thermostat.groovy
...
Added some description to the temporary hold.
2015-12-14 23:36:55 -07:00
Kris Schaller
76fcca90d3
Merging staging into production
2015-12-14 17:09:08 -08:00
Kristofer Schaller
22fb4e36c6
Merge pull request #216 from SmartThingsCommunity/MSA-640-3
...
Merged publication request 'PlantLink'
2015-12-14 17:04:38 -08:00
Kris Schaller
54f976229e
Merging staging into production
2015-12-14 12:59:39 -08:00
Tom Manley
fe4a2ed3d0
multi: Fix invalid accelerometer readings during refresh
...
The code can only correctly handle the accelerometer readings when they
are all received in the same message. Individual reads of the attributes
results in individual read attribute responses which led to events with
incorrect values. The most straightforward fix is to not read the attributes
in the first place and rely on attribute reporting to report the values
at the appropriate time.
Resolves:
https://smartthings.atlassian.net/browse/DVCSMP-1315
2015-12-11 00:24:44 -06:00