MSA-1502: The SMC Networks Micro Door/Window Sensor consists of

a magnet that attaches to a door or window and a
Zigbee wireless sensor that attaches to the door or
window frame. The sensor detects intrusions in
monitored areas and notifies users via a home controller
or security panel.
The sensor consists of a high sensitivity MR
(magnetoresistive) sensor IC/magnet that provides
ample hysteresis for normal and wide air gap solutions.
When the magnet is moved away from the sensor, a
signal is sent to the home controller or security panel that
sets off an alarm when the security system is armed. It
also informs the user when a low-voltage battery
condition occurs.
The product is designed to be elegant, discreet, and
installer-friendly.
Key Features:
■ Micro form factor for discreet installation
■ Lithium battery for longer life & enhanced RF range
■ Device and wall tamper switch added for added
protection
■ Easy to mount with included dual-sided mounting
tape or screws
■ LED indicators for pairing status, low voltage early
detection
■ Zigbee HA 1.2 profile compatible

devicetypes/smartthings/cree-bulb.src/cree-bulb.groovy

@@ -106,7 +106,7 @@ def configure() {
     schedule("0 0/5 * * * ? *", "healthPoll")
     log.debug "Configuring Reporting and Bindings."
     // Device-Watch allows 2 check-in misses from device
-    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
+    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
     // minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
     zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
 }

devicetypes/smartthings/hue-bloom.src/hue-bloom.groovy

@@ -57,7 +57,7 @@ metadata {
 }
 
 void installed() {
-	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan"], displayed: false)
+	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan", hubHardwareId: device.hub.hardwareID], displayed: false)
 }
 
 // parse events into attributes

devicetypes/smartthings/hue-bulb.src/hue-bulb.groovy

@@ -66,7 +66,7 @@ metadata {
 }
 
 void installed() {
-	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan"], displayed: false)
+	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan", hubHardwareId: device.hub.hardwareID], displayed: false)
 }
 
 // parse events into attributes

devicetypes/smartthings/hue-lux-bulb.src/hue-lux-bulb.groovy

@@ -50,7 +50,7 @@ metadata {
 }
 
 void installed() {
-	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan"], displayed: false)
+	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan", hubHardwareId: device.hub.hardwareID], displayed: false)
 }
 
 // parse events into attributes

devicetypes/smartthings/hue-white-ambiance-bulb.src/hue-white-ambiance-bulb.groovy

@@ -55,7 +55,7 @@ metadata {
 }
 
 void installed() {
-	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan"], displayed: false)
+	sendEvent(name: "checkInterval", value: 60 * 12, data: [protocol: "lan", hubHardwareId: device.hub.hardwareID], displayed: false)
 }
 
 // parse events into attributes

devicetypes/smartthings/smartpower-outlet.src/smartpower-outlet.groovy

@@ -129,7 +129,7 @@ def refresh() {
 
 def configure() {
 	// Device-Watch allows 2 check-in misses from device
-	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 	// OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
 	zigbee.onOffConfig(0, 300) + powerConfig() + refresh()
 }

devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy

@@ -180,9 +180,9 @@ private Map parseIasMessage(String description) {
 def getTemperature(value) {
 	def celsius = Integer.parseInt(value, 16).shortValue() / 100
 	if(getTemperatureScale() == "C"){
-		return celsius
+		return Math.round(celsius)
 	} else {
-		return celsiusToFahrenheit(celsius) as Integer
+		return Math.round(celsiusToFahrenheit(celsius))
 	}
 }
 
@@ -293,7 +293,7 @@ def refresh() {
 
 def configure() {
 	// Device-Watch allows 2 check-in misses from device
-	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -194,9 +194,9 @@ private Map parseIasMessage(String description) {
 def getTemperature(value) {
 	def celsius = Integer.parseInt(value, 16).shortValue() / 100
 	if(getTemperatureScale() == "C"){
-		return celsius
+		return Math.round(celsius)
 	} else {
-		return celsiusToFahrenheit(celsius) as Integer
+		return Math.round(celsiusToFahrenheit(celsius))
 	}
 }
 
@@ -304,7 +304,7 @@ def refresh() {
 
 def configure() {
 	// Device-Watch allows 2 check-in misses from device
-	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -261,9 +261,9 @@ def updated() {
 def getTemperature(value) {
 	def celsius = Integer.parseInt(value, 16).shortValue() / 100
 	if(getTemperatureScale() == "C"){
-		return celsius
+		return Math.round(celsius)
 		} else {
-			return celsiusToFahrenheit(celsius) as Integer
+			return Math.round(celsiusToFahrenheit(celsius))
 		}
 	}
 
@@ -402,7 +402,7 @@ def refresh() {
 
 def configure() {
 	// Device-Watch allows 2 check-in misses from device
-	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
 	log.debug "Configuring Reporting"
 

devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy

@@ -256,7 +256,7 @@ def refresh() {
 
 def configure() {
 	// Device-Watch allows 2 check-in misses from device
-	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy

@@ -265,7 +265,7 @@ def refresh()
 
 def configure() {
 	// Device-Watch allows 2 check-in misses from device
-	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
 	log.debug "Configuring Reporting and Bindings."
 	def humidityConfigCmds = [

devicetypes/smartthings/tyco-door-window-sensor.src/.st-ignore

@@ -0,0 +1,2 @@
+.st-ignore
+README.md

devicetypes/smartthings/tyco-door-window-sensor.src/README.md

@@ -0,0 +1,42 @@
+# Tyco Door Window Sensor
+
+
+
+Works with: 
+
+* [Tyco Door Window Sensor](https://support.smartthings.com/hc/en-us/articles/204834100-Tyco-Door-Window-Sensor)
+
+## Table of contents
+
+* [Capabilities](#capabilities)
+* [Health](#device-health)
+* [Battery](#battery-specification)
+
+## Capabilities
+
+* **Battery** - defines device uses a battery
+* **Configuration** - _configure()_ command called when device is installed or device preferences updated
+* **Contact Sensor** - can detect contact (open/close)
+* **Refresh** - _refresh()_ command for status updates
+* **Temperature Measurement** - can measure the device temperature
+* **Health Check** - indicates ability to get device health notifications
+
+## Device Health
+
+Contact sensor with maxReportTime of 5 mins.
+Check-in interval is double the value of maxReportTime for Zigbee device. 
+This gives the device twice the amount of time to respond before it is marked as offline.
+Check-in interval = 12 min
+
+## Battery Specification
+
+3V CR2032 battery is required.
+
+## Troubleshooting
+
+If the device doesn't pair when trying from the SmartThings mobile app, it is possible that either the sensor needs to be reseted or the sensor is out of range.
+Reset needs to be done by inserting the battery in the sensor and then quickly pressing the adjacent black button 10 times. Pairing should be tried again now.
+It may happen that sensor is out of range, then pairing needs to be tried again by placing the sensor closer to the hub.
+Instructions related to pairing, resetting and removing the different motion sensors from SmartThings can be found in the following links
+for the different models:
+* [Tyco Door Window Sensor (MCT-340)](https://support.smartthings.com/hc/en-us/articles/204834100-Tyco-Door-Window-Sensor)

devicetypes/smartthings/tyco-door-window-sensor.src/tyco-door-window-sensor.groovy

@@ -16,12 +16,13 @@
 import physicalgraph.zigbee.clusters.iaszone.ZoneStatus
 
 metadata {
-	definition (name: "Tyco Door/Window Sensor", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "Tyco Door/Window Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
 		capability "Battery"
 		capability "Configuration"
 		capability "Contact Sensor"
 		capability "Refresh"
 		capability "Temperature Measurement"
+		capability "Health Check"
 
 		command "enrollResponse"
 
@@ -229,44 +230,42 @@ private Map getContactResult(value) {
 	]
 }
 
+/**
+ * PING is used by Device-Watch in attempt to reach the Device
+ * */
+def ping() {
+	return zigbee.readAttribute(0x0402, 0x0000) // Read the Temperature Cluster
+}
+
 def refresh()
 {
 	log.debug "Refreshing Temperature and Battery"
-	[
+	def refreshCmds = [
 
         "st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
 		"st rattr 0x${device.deviceNetworkId} 1 1 0x20"
 
 	]
+
+	return refreshCmds + enrollResponse()
 }
 
 def configure() {
+	// Device-Watch allows 2 check-in misses from device
+	sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
 
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 		log.debug "Configuring Reporting, IAS CIE, and Bindings."
-	def configCmds = [
+	def enrollCmds = [
     	"delay 1000",
 
 		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 1", "delay 1500",
 
-        "zcl global send-me-a-report 1 0x20 0x20 600 3600 {01}", "delay 200",
-        "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-
-        "zcl global send-me-a-report 0x402 0 0x29 300 3600 {6400}", "delay 200",
-        "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-
-
         //"raw 0x500 {01 23 00 00 00}", "delay 200",
         //"send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-
-
-		"zdo bind 0x${device.deviceNetworkId} 1 1 0x402 {${device.zigbeeId}} {}", "delay 500",
-		"zdo bind 0x${device.deviceNetworkId} 1 1 1 {${device.zigbeeId}} {}",
-
-        "delay 500"
 	]
-    return configCmds + enrollResponse() + refresh() // send refresh cmds as part of config
+    return enrollCmds + zigbee.batteryConfig() + zigbee.temperatureConfig(30, 300) + refresh() // send refresh cmds as part of config
 }
 
 def enrollResponse() {

devicetypes/smartthings/zigbee-dimmer.src/zigbee-dimmer.groovy

@@ -90,7 +90,7 @@ def refresh() {
 def configure() {
     log.debug "Configuring Reporting and Bindings."
     // Device-Watch allows 2 check-in misses from device
-    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
+    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
     // OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
     zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
 }

devicetypes/smartthings/zigbee-rgbw-bulb.src/zigbee-rgbw-bulb.groovy

@@ -134,7 +134,7 @@ def refresh() {
 def configure() {
     log.debug "Configuring Reporting and Bindings."
     // Device-Watch allows 2 check-in misses from device
-    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
+    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
     // OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
     zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE, 0x20, 1, 3600, 0x01) + zigbee.configureReporting(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION, 0x20, 1, 3600, 0x01) + zigbee.readAttribute(0x0006, 0x00) + zigbee.readAttribute(0x0008, 0x00) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, 0x00) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_COLOR_TEMPERATURE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_HUE) + zigbee.readAttribute(COLOR_CONTROL_CLUSTER, ATTRIBUTE_SATURATION)
 }

devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/zigbee-white-color-temperature-bulb.groovy

@@ -114,7 +114,7 @@ def refresh() {
 def configure() {
     log.debug "Configuring Reporting and Bindings."
     // Device-Watch allows 2 check-in misses from device
-    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee"])
+    sendEvent(name: "checkInterval", value: 60 * 12, displayed: false, data: [protocol: "zigbee", hubHardwareId: device.hub.hardwareID])
     // OnOff minReportTime 0 seconds, maxReportTime 5 min. Reporting interval if no activity
     zigbee.onOffConfig(0, 300) + zigbee.levelConfig() + zigbee.colorTemperatureConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.colorTemperatureRefresh()
 }

devicetypes/smc/smc-door-window-sensor.src/smc-door-window-sensor.groovy

@@ -0,0 +1,372 @@
+/**
+ *  SMCDW30-Z
+ *
+ *  Copyright 2016 Roy Chuang
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+
+metadata {
+	definition (name: "SMC Door/Window Sensor", namespace: "SMC", author: "Roy Chuang") {
+		capability "Contact Sensor"
+		capability "Configuration"
+		capability "Battery"
+		capability "Temperature Measurement"
+		capability "Refresh"
+		capability "Tamper Alert"
+		capability "Sensor"		
+
+		command "enrollResponse"
+
+		fingerprint profileId: "0104", deviceId: "0402", deviceVersion: "00", inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "ACCTON", model: "SMCDW30-Z"
+	}
+
+	simulator {
+		status "closed": "zone status 0x0000 -- extended status 0x00"
+		status "open": "zone status 0x0001 -- extended status 0x00"
+		status "tamper alert with closed": "zone status 0x0004 -- extended status 0x00"
+		status "tamper alert with open": "zone status 0x0005 -- extended status 0x00"
+	}
+
+	preferences {
+		section {
+			image(name: 'educationalcontent', multiple: true, images: [
+				"http://na.smc.com/site/wp-content/uploads/2016/06/SMCDW30-Z-Sensor-_Magnet-1-170x170.png"
+				])
+		}
+		section {
+			input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter '-5'. If 3 degrees too cold, enter '+3'.", displayDuringSetup: false, type: "paragraph", element: "paragraph"
+			input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
+		}
+	}
+
+	tiles(scale: 2) {
+		multiAttributeTile(name:"contact", type: "generic", width: 6, height: 4){
+			tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
+				attributeState "open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#53a7c0"
+				attributeState "closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#ffffff"
+				attributeState "tamper alert with open", label:'tamper', icon:"st.contact.contact.open", backgroundColor:"#cc0000"
+				attributeState "tamper alert with closed", label:'tamper', icon:"st.contact.contact.closed", backgroundColor:"#cc0000"
+			}
+		}
+		valueTile("temperature", "device.temperature", width: 2, height: 2) {
+			state("temperature", label:'${currentValue}°', unit:"F",
+				backgroundColors:[
+					[value: 31, color: "#153591"],
+					[value: 44, color: "#1e9cbb"],
+					[value: 59, color: "#90d2a7"],
+					[value: 74, color: "#44b621"],
+					[value: 84, color: "#f1d801"],
+					[value: 95, color: "#d04e00"],
+					[value: 96, color: "#bc2323"]
+				]
+			)
+		}
+		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
+			state "battery", label:'${currentValue}% battery', unit:""
+		}
+		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
+		}
+		standardTile("rssi", "device.rssi", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
+			state "rssi", label:'${currentValue}% rssi', unit:""
+		}
+
+		main(["contact"])
+		details(["contact", "temperature", "battery", "refresh", "rssi"])
+	}
+}
+
+def parse(String description) {
+	log.debug "description: $description"
+
+	Map map = [:]
+	if (description?.startsWith('catchall:')) {
+		map = parseCatchAllMessage(description)
+	}
+	else if (description?.startsWith('read attr -')) {
+		map = parseReportAttributeMessage(description)
+	}
+	else if (description?.startsWith('temperature: ')) {
+		map = parseCustomMessage(description)
+	}
+	else if (description?.startsWith('zone status')) {
+		map = parseIasMessage(description)
+	}
+
+	log.debug "Parse returned $map"
+	def result = map ? createEvent(map) : null
+
+	if (description?.startsWith('enroll request')) {
+		List cmds = enrollResponse()
+		log.debug "enroll response: ${cmds}"
+		result = cmds?.collect { new physicalgraph.device.HubAction(it) }
+	}
+	return result
+}
+
+private Map parseCatchAllMessage(String description) {
+	Map resultMap = [:]
+	def cluster = zigbee.parse(description)
+	if (shouldProcessMessage(cluster)) {
+		switch(cluster.clusterId) {
+			case 0x0001:
+				resultMap = getBatteryResult(cluster.data.last())
+				break
+
+			case 0x0402:
+				// temp is last 2 data values. reverse to swap endian
+				String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+				def value = getTemperature(temp)
+				resultMap = getTemperatureResult(value)
+				break
+
+			case 0x0b05:
+				log.debug 'Diag'
+				break
+		}
+	}
+
+	return resultMap
+}
+
+private boolean shouldProcessMessage(cluster) {
+	// 0x0B is default response indicating message got through
+	// 0x07 is bind message
+	boolean ignoredMessage = cluster.profileId != 0x0104 ||
+		cluster.command == 0x0B ||
+		cluster.command == 0x07 ||
+		(cluster.data.size() > 0 && cluster.data.first() == 0x3e)
+	return !ignoredMessage
+}
+
+private Map parseReportAttributeMessage(String description) {
+	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
+		def nameAndValue = param.split(":")
+		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
+	}
+	log.debug "Desc Map: $descMap"
+
+	Map resultMap = [:]
+	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
+		def value = getTemperature(descMap.value)
+		resultMap = getTemperatureResult(value)
+	}
+	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
+		resultMap = getBatteryResult(Integer.parseInt(descMap.value, 16))
+	}
+	else if (descMap.cluster == "0B05" && descMap.attrId == "011d") {
+		resultMap = getRssiResult(Integer.parseInt(descMap.value, 16))
+    }
+
+	return resultMap
+}
+
+private Map parseCustomMessage(String description) {
+	Map resultMap = [:]
+	if (description?.startsWith('temperature: ')) {
+		def value = zigbee.parseHATemperatureValue(description, "temperature: ", getTemperatureScale())
+		resultMap = getTemperatureResult(value)
+	}
+	return resultMap
+}
+
+private Map parseIasMessage(String description) {
+	List parsedMsg = description.split(' ')
+	String msgCode = parsedMsg[2]
+
+	Map resultMap = [:]
+	switch(msgCode) {
+		case '0x0000': // Closed
+            resultMap = getContactResult('closed')
+			break
+
+		case '0x0001': // Open/Alarm1
+			resultMap = getContactResult('open')
+			break
+
+		case '0x0004': // Closed & Tamper
+			resultMap = getContactResult('tamper alert with closed')
+			break
+
+		case '0x0005': // Open & Tamper
+            resultMap = getContactResult('tamper alert with open')
+			break
+
+		default :
+			log.warn "ZoneStatus not support!"
+			break
+	}
+	return resultMap
+}
+
+def getTemperature(value) {
+	def celsius = Integer.parseInt(value, 16).shortValue() / 100
+	if(getTemperatureScale() == "C"){
+		return celsius
+	} else {
+		return celsiusToFahrenheit(celsius) as Integer
+	}
+}
+
+private Map getBatteryResult(rawValue) {
+	log.info "Battery rawValue = ${rawValue}"
+	def linkText = getLinkText(device)
+
+	def result = [
+		name: 'battery',
+		value: '--',
+		translatable: true
+	]
+
+	def volts = rawValue / 10
+
+	if (rawValue == 0 || rawValue == 255) {}
+	else {
+		if (volts > 3.5) {
+			result.descriptionText = "${device.displayName} battery has too much power: (> 3.5) volts."
+		}
+		else {
+				def minVolts = 2.1
+				def maxVolts = 3.2
+				def pct = (volts - minVolts) / (maxVolts - minVolts)
+				def roundedPct = Math.round(pct * 100)
+				result.value = Math.min(100, roundedPct)
+				result.descriptionText = "${device.displayName} battery was ${result.value}%"
+		}
+	}
+
+	return result
+}
+
+private Map getRssiResult(rawValue) {
+	log.info "RSSI rawValue = ${rawValue}"
+	def linkText = getLinkText(device)
+
+	def result = [
+		name: 'rssi',
+		value: '--',
+		translatable: true
+	]
+    
+	def pct = rawValue / 255
+	def roundedPct = Math.round(pct * 100)
+	result.value = Math.min(100, roundedPct)
+	result.descriptionText = "${device.displayName} RSSI was ${result.value}%"
+
+	return result
+}
+
+private Map getTemperatureResult(value) {
+	if (tempOffset) {
+		def offset = tempOffset as int
+		def v = value as int
+		value = v + offset
+	}
+    
+    log.info "Temperature is ${value}"
+    def descriptionText
+    if ( temperatureScale == 'C' )
+    	descriptionText = "${device.displayName} was ${value}°C"
+    else
+    	descriptionText = "${device.displayName} was ${value}°F"
+
+	return [
+		name: 'temperature',
+		value: value,
+		descriptionText: descriptionText,
+        translatable: true
+	]
+}
+
+private Map getContactResult(value) {
+	String descriptionText = "${device.displayName}"
+	return [
+		name: 'contact',
+		value: value,
+		descriptionText: descriptionText,
+        translatable: true
+	]
+}
+
+def refresh() {
+	log.debug "refresh called"
+	def refreshCmds = [
+		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
+		"st rattr 0x${device.deviceNetworkId} 1 0x001 0x20", "delay 200",
+		"st rattr 0x${device.deviceNetworkId} 1 0xb05 0x11d", "delay 200"
+	]
+
+	return refreshCmds
+}
+
+def configure() {
+	sendEvent(name: "checkInterval", value: 7200, displayed: false)
+
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
+	log.debug "Configuring Reporting, IAS CIE, and Bindings."
+	log.debug "${device.hub.zigbeeEui}. ${zigbeeEui}"
+
+	def configCmds = [
+		/* Write CIE */
+		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 2000",
+
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 500",
+		"zcl global send-me-a-report 0x0001 0x20 0x20 30 21600 {02}",		//Battery Voltage 6 hrs
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 1000",
+
+		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x402 {${device.zigbeeId}} {}", "delay 500",
+		"zcl global send-me-a-report 0x0402 0 0x29 30 3600 {C800}",		//Temperature 1 hr
+		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 1000",
+
+		//Set long poll interval to 5 min
+		"raw 0x0020 {11 00 02 b0 04 00 00}", 
+		"send 0x${device.deviceNetworkId} 1 1", "delay 500"
+	]
+	return configCmds + refresh() // send refresh cmds as part of config
+}
+
+def enrollResponse() {
+	log.debug "Sending enroll response"
+	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
+	[
+		//Enroll Response
+		"raw 0x500 {01 23 00 00 00}",
+		"send 0x${device.deviceNetworkId} 1 1", "delay 200"
+	]
+}
+
+private getEndpointId() {
+	new BigInteger(device.endpointId, 16).toString()
+}
+
+private hex(value) {
+	new BigInteger(Math.round(value).toString()).toString(16)
+}
+
+private String swapEndianHex(String hex) {
+	reverseArray(hex.decodeHex()).encodeHex()
+}
+
+private byte[] reverseArray(byte[] array) {
+	int i = 0;
+	int j = array.length - 1;
+	byte tmp;
+	while (j > i) {
+		tmp = array[j];
+		array[j] = array[i];
+		array[i] = tmp;
+		j--;
+		i++;
+	}
+	return array
+}

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -83,7 +83,7 @@ def bridgeDiscovery(params=[:])
 
 	return dynamicPage(name:"bridgeDiscovery", title:"Discovery Started!", nextPage:"bridgeBtnPush", refreshInterval:refreshInterval, uninstall: true) {
 		section("Please wait while we discover your Hue Bridge. Discovery can take five minutes or more, so sit back and relax! Select your device below once discovered.") {
-			input "selectedHue", "enum", required:false, title:"Select Hue Bridge (${numFound} found)", multiple:false, options:options
+			input "selectedHue", "enum", required:false, title:"Select Hue Bridge (${numFound} found)", multiple:false, options:options, submitOnChange: true
 		}
 	}
 }
@@ -333,9 +333,9 @@ def bulbListHandler(hub, data = "") {
     def bridge = null
 	if (selectedHue) {
 		bridge = getChildDevice(selectedHue)
+		bridge?.sendEvent(name: "bulbList", value: hub, data: bulbs, isStateChange: true, displayed: false)
 	}
-    bridge.sendEvent(name: "bulbList", value: hub, data: bulbs, isStateChange: true, displayed: false)
-    msg = "${bulbs.size()} bulbs found. ${bulbs}"
+	msg = "${bulbs.size()} bulbs found. ${bulbs}"
 	return msg
 }
 
@@ -490,24 +490,25 @@ def ssdpBridgeHandler(evt) {
 		def host = ip + ":" + port
 		log.debug "Device ($parsedEvent.mac) was already found in state with ip = $host."
 		def dstate = bridges."${parsedEvent.ssdpUSN.toString()}"
-		def dni = "${parsedEvent.mac}"
-		def d = getChildDevice(dni)
+		def dniReceived = "${parsedEvent.mac}"
+		def currentDni = dstate.mac
+		def d = getChildDevice(dniReceived)
 		def networkAddress = null
 		if (!d) {
-			childDevices.each {
-				if (it.getDeviceDataByName("mac")) {
-					def newDNI = "${it.getDeviceDataByName("mac")}"
-					d = it
-					if (newDNI != it.deviceNetworkId) {
-						def oldDNI = it.deviceNetworkId
-						log.debug "updating dni for device ${it} with $newDNI - previous DNI = ${it.deviceNetworkId}"
-						it.setDeviceNetworkId("${newDNI}")
-						if (oldDNI == selectedHue) {
-							app.updateSetting("selectedHue", newDNI)
-						}
-						doDeviceSync()
-					}
+			// There might be a mismatch between bridge DNI and the actual bridge mac address, correct that
+			log.debug "Bridge with $dniReceived not found"
+			def bridge = childDevices.find { it.deviceNetworkId == currentDni }
+			if (bridge != null) {
+				log.warn "Bridge is set to ${bridge.deviceNetworkId}, updating to $dniReceived"
+				bridge.setDeviceNetworkId("${dniReceived}")
+				dstate.mac = dniReceived
+				// Check to see if selectedHue is a valid bridge, otherwise update it
+				def isSelectedValid = bridges?.find {it.value?.mac == selectedHue}
+				if (isSelectedValid == null) {
+					log.warn "Correcting selectedHue in state"
+					app.updateSetting("selectedHue", dniReceived)
 				}
+				doDeviceSync()
 			}
 		} else {
 			updateBridgeStatus(d)
@@ -525,6 +526,18 @@ def ssdpBridgeHandler(evt) {
 				d.sendEvent(name:"networkAddress", value: host)
 				d.updateDataValue("networkAddress", host)
 			}
+			if (dstate.mac != dniReceived) {
+				log.warn "Correcting bridge mac address in state"
+				dstate.mac = dniReceived
+			}
+			if (selectedHue != dniReceived) {
+				// Check to see if selectedHue is a valid bridge, otherwise update it
+				def isSelectedValid = bridges?.find {it.value?.mac == selectedHue}
+				if (isSelectedValid == null) {
+					log.warn "Correcting selectedHue in state"
+					app.updateSetting("selectedHue", dniReceived)
+				}
+			}
 		}
 	}
 }
@@ -950,6 +963,14 @@ private handleCommandResponse(body) {
  * @return empty array
  */
 private handlePoll(body) {
+	// Used to track "unreachable" time
+	// Device is considered "offline" if it has been in the "unreachable" state for
+	// 11 minutes (e.g. two poll intervals)
+	// Note, Hue Bridge marks devices as "unreachable" often even when they accept commands
+	Calendar time11 = Calendar.getInstance()
+	time11.add(Calendar.MINUTE, -11)
+	Calendar currentTime = Calendar.getInstance()
+
 	def bulbs = getChildDevices()
 	for (bulb in body) {
 		def device = bulbs.find{it.deviceNetworkId == "${app.id}/${bulb.key}"}
@@ -959,7 +980,10 @@ private handlePoll(body) {
 					// light just came back online, notify device watch
 					def lastActivity = now()
 					device.sendEvent(name: "deviceWatch-status", value: "ONLINE", description: "Last Activity is on ${new Date((long) lastActivity)}", displayed: false, isStateChange: true)
+					log.debug "$device is Online"
 				}
+				// Mark light as "online"
+				state.bulbs[bulb.key]?.unreachableSince = null
 				state.bulbs[bulb.key]?.online = true
 
 				// If user just executed commands, then do not send events to avoid confusing the turning on/off state
@@ -969,9 +993,18 @@ private handlePoll(body) {
 					sendColorEvents(device, bulb.value?.state?.xy, bulb.value?.state?.hue, bulb.value?.state?.sat, bulb.value?.state?.ct, bulb.value?.state?.colormode)
 				}
 			} else {
-				state.bulbs[bulb.key]?.online = false
-				log.warn "$device is not reachable by Hue bridge"
-				device.sendEvent(name: "DeviceWatch-DeviceOffline", value: "offline", displayed: false, isStateChange: true)
+				if (state.bulbs[bulb.key]?.unreachableSince == null) {
+					// Store the first time where device was reported as "unreachable"
+					state.bulbs[bulb.key]?.unreachableSince = currentTime.getTimeInMillis()
+				} else if (state.bulbs[bulb.key]?.online) {
+					// Check if device was "unreachable" for more than 11 minutes and mark "offline" if necessary
+					if (state.bulbs[bulb.key]?.unreachableSince < time11.getTimeInMillis()) {
+						log.warn "$device went Offline"
+						state.bulbs[bulb.key]?.online = false
+						device.sendEvent(name: "DeviceWatch-DeviceOffline", value: "offline", displayed: false, isStateChange: true)
+					}
+				}
+				log.warn "$device may not reachable by Hue bridge"
 			}
 		}
 	}
@@ -1006,9 +1039,6 @@ def hubVerification(bodytext) {
 def on(childDevice) {
 	log.debug "Executing 'on'"
 	def id = getId(childDevice)
-	if (!isOnline(id)) {
-		return "Bulb is unreachable"
-	}
 	updateInProgress()
 	createSwitchEvent(childDevice, "on")
 	put("lights/$id/state", [on: true])
@@ -1018,9 +1048,6 @@ def on(childDevice) {
 def off(childDevice) {
 	log.debug "Executing 'off'"
 	def id = getId(childDevice)
-	if (!isOnline(id)) {
-		return "Bulb is unreachable"
-	}
 	updateInProgress()
 	createSwitchEvent(childDevice, "off")
 	put("lights/$id/state", [on: false])
@@ -1030,9 +1057,6 @@ def off(childDevice) {
 def setLevel(childDevice, percent) {
 	log.debug "Executing 'setLevel'"
 	def id = getId(childDevice)
-	if (!isOnline(id)) {
-		return "Bulb is unreachable"
-	}
     updateInProgress()
 	// 1 - 254
     def level
@@ -1057,10 +1081,6 @@ def setLevel(childDevice, percent) {
 def setSaturation(childDevice, percent) {
 	log.debug "Executing 'setSaturation($percent)'"
 	def id = getId(childDevice)
-	if (!isOnline(id)) {
-		return "Bulb is unreachable"
-	}
-
 	updateInProgress()
 	// 0 - 254
 	def level = Math.min(Math.round(percent * 254 / 100), 254)
@@ -1073,9 +1093,6 @@ def setSaturation(childDevice, percent) {
 def setHue(childDevice, percent) {
 	log.debug "Executing 'setHue($percent)'"
 	def id = getId(childDevice)
-	if (!isOnline(id)) {
-		return "Bulb is unreachable"
-	}
     updateInProgress()
 	// 0 - 65535
 	def level =	Math.min(Math.round(percent * 65535 / 100), 65535)
@@ -1088,9 +1105,6 @@ def setHue(childDevice, percent) {
 def setColorTemperature(childDevice, huesettings) {
 	log.debug "Executing 'setColorTemperature($huesettings)'"
 	def id = getId(childDevice)
-	if (!isOnline(id)) {
-		return "Bulb is unreachable"
-	}
     updateInProgress()
 	// 153 (6500K) to 500 (2000K)
 	def ct = hueSettings == 6500 ? 153 : Math.round(1000000/huesettings)
@@ -1102,9 +1116,6 @@ def setColorTemperature(childDevice, huesettings) {
 def setColor(childDevice, huesettings) {
     log.debug "Executing 'setColor($huesettings)'"
 	def id = getId(childDevice)
-	if (!isOnline(id)) {
-		return "Bulb is unreachable"
-	}
     updateInProgress()
 
     def value = [:]
@@ -1120,7 +1131,7 @@ def setColor(childDevice, huesettings) {
 			value.hue = Math.min(Math.round(huesettings.hue * 65535 / 100), 65535)
 		if (huesettings.saturation != null)
 			value.sat = Math.min(Math.round(huesettings.saturation * 254 / 100), 254)
-	} else if (huesettings.hex != null && false) {
+	} else if (huesettings.hex != null) {
 		// For now ignore model to get a consistent color if same color is set across multiple devices
 		// def model = state.bulbs[getId(childDevice)]?.modelid
 		// value.xy = calculateXY(huesettings.hex, model)
@@ -1224,7 +1235,7 @@ private getBridgeIP() {
     	if (d) {
         	if (d.getDeviceDataByName("networkAddress"))
             	host =  d.getDeviceDataByName("networkAddress")
-            else
+        else
         		host = d.latestState('networkAddress').stringValue
         }
         if (host == null || host == "") {
@@ -1663,7 +1674,7 @@ private boolean checkPointInLampsReach(p, colorPoints) {
 }
 
 /**
- * Converts an RGB color in hex to HSV.
+ * Converts an RGB color in hex to HSV/HSB.
  * Algorithm based on http://en.wikipedia.org/wiki/HSV_color_space.
  *
  * @param colorStr color value in hex (#ff03d3)
@@ -1673,32 +1684,32 @@ private boolean checkPointInLampsReach(p, colorPoints) {
 def hexToHsv(colorStr){
 	def r = Integer.valueOf( colorStr.substring( 1, 3 ), 16 ) / 255
 	def g = Integer.valueOf( colorStr.substring( 3, 5 ), 16 ) / 255
-	def b = Integer.valueOf( colorStr.substring( 5, 7 ), 16 ) / 255;
+	def b = Integer.valueOf( colorStr.substring( 5, 7 ), 16 ) / 255
 
 	def max = Math.max(Math.max(r, g), b)
 	def min = Math.min(Math.min(r, g), b)
 
-	def h, s, v = max;
+	def h, s, v = max
 
-	def d = max - min;
-	s = max == 0 ? 0 : d / max;
+	def d = max - min
+	s = max == 0 ? 0 : d / max
 
 	if(max == min){
-		h = 0;
+		h = 0
 	}else{
 		switch(max){
-			case r: h = (g - b) / d + (g < b ? 6 : 0); break;
-			case g: h = (b - r) / d + 2; break;
-			case b: h = (r - g) / d + 4; break;
+			case r: h = (g - b) / d + (g < b ? 6 : 0); break
+			case g: h = (b - r) / d + 2; break
+			case b: h = (r - g) / d + 4; break
 		}
 		h /= 6;
 	}
 
-	return [(h * 100).round(), (s * 100).round(), (v * 100).round()];
+	return [Math.round(h * 100), Math.round(s * 100), Math.round(v * 100)]
 }
 
 /**
- * Converts HSV color to RGB in hex.
+ * Converts HSV/HSB color to RGB in hex.
  * Algorithm based on http://en.wikipedia.org/wiki/HSV_color_space.
  *
  * @param  hue hue 0-100
@@ -1713,11 +1724,11 @@ def hsvToHex(hue, sat, value = 100){
 	def s = sat / 100
 	def v = value / 100
 
-	def i = Math.floor(h * 6);
-	def f = h * 6 - i;
-	def p = v * (1 - s);
-	def q = v * (1 - f * s);
-	def t = v * (1 - (1 - f) * s);
+	def i = Math.floor(h * 6)
+	def f = h * 6 - i
+	def p = v * (1 - s)
+	def q = v * (1 - f * s)
+	def t = v * (1 - (1 - f) * s)
 
 	switch (i % 6) {
 		case 0:
@@ -1753,9 +1764,9 @@ def hsvToHex(hue, sat, value = 100){
 	}
 
 	// Converting float components to int components.
-	def r1 = String.format("%02X", (int) (r * 255.0f));
-	def g1 = String.format("%02X", (int) (g * 255.0f));
-	def b1 = String.format("%02X", (int) (b * 255.0f));
+	def r1 = String.format("%02X", (int) (r * 255.0f))
+	def g1 = String.format("%02X", (int) (g * 255.0f))
+	def b1 = String.format("%02X", (int) (b * 255.0f))
 
 	return "#$r1$g1$b1"
 }