MSA-894: Teste

Ecobee - Changed tiles order

devicetypes/plaidsystems/spruce-controller.src/spruce-controller.groovy

@@ -0,0 +1,627 @@
+/**
+ *  Spruce Controller - Pre Release V2 10/11/2015
+ *
+ *  Copyright 2015 Plaid Systems
+ *
+ *	Author: NC
+ *	Date: 2015-11
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ -----------V3 updates-11-2015------------
+ -Start program button updated to signal schedule check in Scheduler
+ 11/17 alarm "0" -> 0	(ln 305)
+ */
+
+metadata {
+	definition (name: "Spruce Controller", namespace: "plaidsystems", author: "NCauffman") {
+		capability "Switch"
+        capability "Configuration"
+        capability "Refresh"
+        capability "Actuator"
+        capability "Valve"        
+		
+        attribute "switch", "string"
+        attribute "switch1", "string"
+		attribute "switch2", "string"
+		attribute "switch8", "string"
+		attribute "switch5", "string"
+		attribute "switch3", "string"
+		attribute "switch4", "string"
+		attribute "switch6", "string"
+		attribute "switch7", "string"
+        attribute "switch9", "string"
+		attribute "switch10", "string"
+		attribute "switch11", "string"
+		attribute "switch12", "string"
+		attribute "switch13", "string"
+		attribute "switch14", "string"
+		attribute "switch15", "string"
+        attribute "switch16", "string"
+		attribute "status", "string"        
+        
+        command "programOn"
+        command "programOff"
+        command "on"
+        command "off"
+        command "z1on"
+		command "z1off"
+		command "z2on"
+		command "z2off"        
+		command "z3on"
+		command "z3off"
+		command "z4on"
+		command "z4off"
+		command "z5on"
+		command "z5off"
+		command "z6on"
+		command "z6off"
+		command "z7on"
+		command "z7off"
+		command "z8on"
+		command "z8off"
+        command "z9on"
+        command "z9off"
+		command "z10on"
+		command "z10off"
+		command "z11on"
+		command "z11off"
+		command "z12on"
+		command "z12off"
+		command "z13on"
+		command "z13off"
+		command "z14on"
+		command "z14off"
+		command "z15on"
+		command "z15off"
+		command "z16on"
+		command "z16off"
+        command "offtime"
+        
+        command "refresh"        
+        command "rain"
+        command "manual"
+        command "setDisplay"
+        
+        command "settingsMap"
+        command "writeTime"
+        command "writeType"        
+        command "notify"
+        command "updated"
+
+		fingerprint endpointId: "1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18", profileId: "0104", deviceId: "0002", deviceVersion: "00", inClusters: "0000,0003,0004,0005,0006,000F", outClusters: "0003, 0019", manufacturer: "PLAID SYSTEMS", model: "PS-SPRZ16-01"
+		
+	}
+
+	// simulator metadata
+	simulator {
+		// status messages
+		
+		// reply messages
+		
+	}
+    preferences {
+    input description: "Press Configure button after making changes to these preferences", displayDuringSetup: true, type: "paragraph", element: "paragraph", title: ""
+    input "RainEnable", "bool", title: "Rain Sensor Attached?", required: false, displayDuringSetup: true
+    input "ManualTime", "number", title: "Automatic shutoff time when a zone is turned on manually?", required: false, displayDuringSetup: true
+	}
+
+	// UI tile definitions
+	tiles {
+    
+    	standardTile("status", "device.status") {            
+            state "schedule", label: 'Schedule Set', icon: "http://www.plaidsystems.com/smartthings/st_spruce_leaf_225_t.png"
+            state "finished", label: 'Spruce Finished', icon: "st.Outdoor.outdoor5", backgroundColor: "#46c2e8"
+            state "raintoday", label: 'Rain Today', icon: "st.custom.wuk.nt_chancerain"
+            state "rainy", label: 'Previous Rain', icon: "st.custom.wuk.nt_chancerain"
+            state "raintom", label: 'Rain Tomorrow', icon: "st.custom.wuk.nt_chancerain"           
+            state "donewweek", label: 'Spruce Finished', icon: "st.Outdoor.outdoor5", backgroundColor: "#52c435"
+            state "skipping", label: 'Skip Today', icon: "st.Outdoor.outdoor20", backgroundColor: "#36cfe3"
+            state "moisture", label: '', icon: "st.Weather.weather2", backgroundColor: "#36cfe3"
+            state "pause", label: 'PAUSE', icon: "st.contact.contact.open", backgroundColor: "#f2a51f"           
+            state "active", label: 'Active', icon: "st.Outdoor.outdoor12", backgroundColor: "#3DC72E"
+            state "season", label: 'Seasonal Adjustment', icon: "st.Outdoor.outdoor17", backgroundColor: "#ffb900"
+            state "disable", label: 'Disabled', icon: "st.secondary.off", backgroundColor: "#888888"
+            state "warning", label: '', icon: "st.categories.damageAndDanger", backgroundColor: "#ffff7f"
+            state "alarm", label: 'Alarm', icon: "st.categories.damageAndDanger", backgroundColor: "#f9240c"
+        }
+		standardTile("switch", "device.switch") {			
+			//state "programOff", label: 'Start Program', action: "programOn", icon: "st.sonos.play-icon", backgroundColor: "#a9a9a9"
+            state "off", label: 'Start Program', action: "programOn", icon: "st.sonos.play-icon", backgroundColor: "#a9a9a9"
+            state "programOn", label: 'Initialize Program', action: "programOff", icon: "st.contact.contact.open", backgroundColor: "#f6e10e"            
+            state "on", label: 'Program Running', action: "off", icon: "st.Outdoor.outdoor12", backgroundColor: "#3DC72E"
+		}
+        standardTile("rainsensor", "device.rainsensor") {			
+			state "rainSensrooff", label: 'Rain Sensor Clear', icon: "st.Weather.weather14", backgroundColor: "#a9a9a9"
+            state "rainSensoron", label: 'Rain Detected', icon: "st.Weather.weather10", backgroundColor: "#f6e10e"
+		}    	
+        standardTile("switch1", "device.switch1") {			
+			state "z1off", label: '1', action: "z1on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
+            state "z1on", label: '1', action: "z1off", icon: "st.valves.water.open", backgroundColor: "#46c2e8"
+		}
+        standardTile("switch2", "device.switch2") {            
+            state "z2off", label: '2', action: "z2on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
+            state "z2on", label: '2', action: "z2off", icon: "st.valves.water.open", backgroundColor: "#46c2e8"
+		}        
+        standardTile("switch3", "device.switch3", inactiveLabel: false) {			
+			state "z3off", label: '3', action: "z3on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
+            state "z3on", label: '3', action: "z3off", icon: "st.valves.water.open", backgroundColor: "#46c2e8"
+		}
+        standardTile("switch4", "device.switch4", inactiveLabel: false) {            
+            state "z4off", label: '4', action: "z4on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
+            state "z4on", label: '4', action: "z4off", icon: "st.valves.water.open", backgroundColor: "#46c2e8"
+		}
+        standardTile("switch5", "device.switch5", inactiveLabel: false) {            
+            state "z5off", label: '5', action: "z5on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
+            state "z5on", label: '5', action: "z5off", icon: "st.valves.water.open", backgroundColor: "#46c2e8"
+		}
+		standardTile("switch6", "device.switch6", inactiveLabel: false) {            
+            state "z6off", label: '6', action: "z6on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
+            state "z6on", label: '6', action: "z6off", icon: "st.valves.water.open", backgroundColor: "#46c2e8"
+		}
+        standardTile("switch7", "device.switch7", inactiveLabel: false) {            
+            state "z7off", label: '7', action: "z7on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
+            state "z7on", label: '7', action: "z7off", icon: "st.valves.water.open", backgroundColor: "#46c2e8"
+		}
+		standardTile("switch8", "device.switch8", inactiveLabel: false) {            
+            state "z8off", label: '8', action: "z8on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
+            state "z8on", label: '8', action: "z8off", icon: "st.valves.water.open", backgroundColor: "#46c2e8"
+		}
+        standardTile("switch9", "device.switch9", inactiveLabel: false) {			
+			state "z9off", label: '9', action: "z9on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
+            state "z9on", label: '9', action: "z9off", icon: "st.valves.water.open", backgroundColor: "#46c2e8"
+		}
+        standardTile("switch10", "device.switch10", inactiveLabel: false) {            
+            state "z10off", label: '10', action: "z10on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
+            state "z10on", label: '10', action: "z10off", icon: "st.valves.water.open", backgroundColor: "#46c2e8"
+		}        
+        standardTile("switch11", "device.switch11", inactiveLabel: false) {			
+			state "z11off", label: '11', action: "z11on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
+            state "z11on", label: '11', action: "z11off", icon: "st.valves.water.open", backgroundColor: "#46c2e8"
+		}
+        standardTile("switch12", "device.switch12", inactiveLabel: false) {            
+            state "z12off", label: '12', action: "z12on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
+            state "z12on", label: '12', action: "z12off", icon: "st.valves.water.open", backgroundColor: "#46c2e8"
+		}
+        standardTile("switch13", "device.switch13", inactiveLabel: false) {            
+            state "z13off", label: '13', action: "z13on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
+            state "z13on", label: '13', action: "z13off", icon: "st.valves.water.open", backgroundColor: "#46c2e8"
+		}
+		standardTile("switch14", "device.switch14", inactiveLabel: false) {            
+            state "z14off", label: '14', action: "z14on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
+            state "z14on", label: '14', action: "z14off", icon: "st.valves.water.open", backgroundColor: "#46c2e8"
+		}
+        standardTile("switch15", "device.switch15", inactiveLabel: false) {            
+            state "z15off", label: '15', action: "z15on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
+            state "z15on", label: '15', action: "z15off", icon: "st.valves.water.open", backgroundColor: "#46c2e8"
+		}		
+        standardTile("switch16", "device.switch16", inactiveLabel: false) {            
+            state "z16off", label: '16', action: "z16on", icon: "st.valves.water.closed", backgroundColor: "#ffffff"
+            state "z16on", label: '16', action: "z16off", icon: "st.valves.water.open", backgroundColor: "#46c2e8"
+		}        
+        standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
+			state "default", action: "refresh", icon:"st.secondary.refresh"            
+		}
+        standardTile("configure", "device.configure", inactiveLabel: false, decoration: "flat") {
+			state "configure", label:'', action:"configuration.configure", icon:"st.secondary.configure"
+		}		
+		
+        main (["status"])        
+        details(["status","rainsensor","switch","switch1","switch2","switch3","switch4","switch5","switch6","switch7","switch8","switch9","switch10","switch11","switch12","switch13","switch14","switch15","switch16","refresh","configure"])		
+    }    
+}
+
+def programOn(){
+    sendEvent(name: "switch", value: "programOn", descriptionText: "Program turned on")    
+    }
+    
+def programOff(){    
+    sendEvent(name: "switch", value: "off", descriptionText: "Program turned off")
+    off()
+    }
+    
+def updated(){
+	log.debug "updated"    
+}
+
+// Parse incoming device messages to generate events
+def parse(String description) {	
+	//log.debug "Parse description $description"
+    def result = null
+    def map = [:]
+	if (description?.startsWith("read attr -")) {
+		def descMap = parseDescriptionAsMap(description)
+		//log.debug "Desc Map: $descMap"
+        //using 000F cluster instead of 0006 (switch) because ST does not differentiate between EPs and processes all as switch
+		if (descMap.cluster == "000F" && descMap.attrId == "0055") {
+			log.debug "Zone"
+            map = getZone(descMap)            
+		}
+        else if (descMap.cluster == "0009" && descMap.attrId == "0000") {
+			log.debug "Alarm"            
+            map = getAlarm(descMap)
+            }
+	}     
+	
+	if (map) {
+		result = createEvent(map)
+	}
+	log.debug "Parse returned $map $result"
+	return result
+}
+
+def parseDescriptionAsMap(description) {
+	(description - "read attr - ").split(",").inject([:]) { map, param ->
+		def nameAndValue = param.split(":")
+		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
+	}
+}
+
+def getZone(descMap){
+	def map = [:]
+    
+    def EP = Integer.parseInt(descMap.endpoint.trim(), 16)
+    
+    String onoff
+    if(descMap.value == "00"){
+    	onoff = "off"        
+    }    
+    else onoff = "on"
+            
+    if (EP == 1){
+    	map.name = "switch"
+        map.value = onoff
+        map.descriptionText = "${device.displayName} turned sprinkler program $onoff"
+        }
+        
+    else if (EP == 18) {
+        map.name = "rainsensor"
+    	map.value = "rainSensor" + onoff
+        map.descriptionText = "${device.displayName} rain sensor is $onoff"
+        }
+   	else {
+        EP -= 1
+        map.name = "switch" + EP
+    	map.value = "z" + EP + onoff
+    	map.descriptionText = "${device.displayName} turned Zone $EP $onoff"
+    	}
+        
+    map.isStateChange = true 
+    map.displayed = true    
+    return map
+}
+
+def getAlarm(descMap){
+	def map = [:]
+    map.name = "status"
+    def alarmID = Integer.parseInt(descMap.value.trim(), 16)
+    log.debug "${alarmID}"
+    if(alarmID <= 0) map.descriptionText = "${device.displayName} has rebooted, no other alarms"
+    else map.descriptionText = "${device.displayName} rebooted, reported error on zone ${alarmID - 1}, please check zone is working correctly"    
+	map.value = "alarm"
+    map.isStateChange = true
+    map.displayed = true
+    return map        
+}
+
+//status notify and change status
+def notify(value, text){	
+	sendEvent(name:"status", value:"$value", descriptionText:"$text", isStateChange: true, display: false)
+
+}
+
+//prefrences - rain sensor, manual time
+def rain() {
+    log.debug "Rain $RainEnable"
+    if (RainEnable) "st wattr 0x${device.deviceNetworkId} 18 0x0F 0x51 0x10 {01}"
+    else "st wattr 0x${device.deviceNetworkId} 18 0x0F 0x51 0x10 {00}"
+}
+def manual(){
+	log.debug "Time $ManualTime"
+    def mTime = 10
+    if (ManualTime) mTime = ManualTime
+    def manualTime = hex(mTime)
+    "st wattr 0x${device.deviceNetworkId} 1 6 0x4002 0x21 {00${manualTime}}"
+    
+    }
+
+//write switch time settings map
+def settingsMap(WriteTimes, attrType){
+	log.debug WriteTimes    
+	
+    def i = 1
+    def runTime
+    def sendCmds = []
+    while(i <= 17){
+    	  
+    	if (WriteTimes."${i}"){        	
+        	runTime = hex(Integer.parseInt(WriteTimes."${i}"))
+        	log.debug "${i} : $runTime"
+		
+        	if (attrType == 4001) sendCmds.push("st wattr 0x${device.deviceNetworkId} ${i} 0x06 0x4001 0x21 {00${runTime}}")
+        	else sendCmds.push("st wattr 0x${device.deviceNetworkId} ${i} 0x06 0x4002 0x21 {00${runTime}}")
+            sendCmds.push("delay 500")
+        }
+        i++
+    }    
+    return sendCmds
+}
+
+//send switch time
+def writeType(wEP, cycle){
+	log.debug "wt ${wEP} ${cycle}"
+    "st wattr 0x${device.deviceNetworkId} ${wEP} 0x06 0x4001 0x21 {00" + hex(cycle) + "}"
+    }
+//send switch off time
+def writeTime(wEP, runTime){    
+    "st wattr 0x${device.deviceNetworkId} ${wEP} 0x06 0x4002 0x21 {00" + hex(runTime) + "}"
+    }
+
+//set reporting and binding
+def configure() {
+
+	String zigbeeId = swapEndianHex(device.hub.zigbeeId)
+	log.debug "Confuguring Reporting and Bindings ${device.deviceNetworkId} ${device.zigbeeId}"
+	sendEvent(name: 'configuration',value: 100, descriptionText: "Configuration initialized")
+    
+    def configCmds = [	
+        //program on/off
+        "zdo bind 0x${device.deviceNetworkId} 1 1 6 {${device.zigbeeId}} {}", "delay 1000",
+        "zdo bind 0x${device.deviceNetworkId} 1 1 0x09 {${device.zigbeeId}} {}", "delay 1000",        
+        "zdo bind 0x${device.deviceNetworkId} 1 1 0x0F {${device.zigbeeId}} {}", "delay 1000",
+        //zones 1-8
+        "zdo bind 0x${device.deviceNetworkId} 2 1 0x0F {${device.zigbeeId}} {}", "delay 1000",
+        "zdo bind 0x${device.deviceNetworkId} 3 1 0x0F {${device.zigbeeId}} {}", "delay 1000",
+		"zdo bind 0x${device.deviceNetworkId} 4 1 0x0F {${device.zigbeeId}} {}", "delay 1000",
+        "zdo bind 0x${device.deviceNetworkId} 5 1 0x0F {${device.zigbeeId}} {}", "delay 1000",
+        "zdo bind 0x${device.deviceNetworkId} 6 1 0x0F {${device.zigbeeId}} {}", "delay 1000",
+        "zdo bind 0x${device.deviceNetworkId} 7 1 0x0F {${device.zigbeeId}} {}", "delay 1000",
+        "zdo bind 0x${device.deviceNetworkId} 8 1 0x0F {${device.zigbeeId}} {}", "delay 1000",        
+        "zdo bind 0x${device.deviceNetworkId} 9 1 0x0F {${device.zigbeeId}} {}", "delay 1000",
+        //zones 9-16
+        "zdo bind 0x${device.deviceNetworkId} 10 1 0x0F {${device.zigbeeId}} {}", "delay 1000",
+        "zdo bind 0x${device.deviceNetworkId} 11 1 0x0F {${device.zigbeeId}} {}", "delay 1000",
+		"zdo bind 0x${device.deviceNetworkId} 12 1 0x0F {${device.zigbeeId}} {}", "delay 1000",
+        "zdo bind 0x${device.deviceNetworkId} 13 1 0x0F {${device.zigbeeId}} {}", "delay 1000",
+        "zdo bind 0x${device.deviceNetworkId} 14 1 0x0F {${device.zigbeeId}} {}", "delay 1000",
+        "zdo bind 0x${device.deviceNetworkId} 15 1 0x0F {${device.zigbeeId}} {}", "delay 1000",
+        "zdo bind 0x${device.deviceNetworkId} 16 1 0x0F {${device.zigbeeId}} {}", "delay 1000",        
+        "zdo bind 0x${device.deviceNetworkId} 17 1 0x0F {${device.zigbeeId}} {}", "delay 1000",
+        //rain sensor
+        "zdo bind 0x${device.deviceNetworkId} 18 1 0x0F {${device.zigbeeId}} {}",
+        
+        "zcl global send-me-a-report 6 0 0x10 1 0 {01}", "delay 500",
+        "send 0x${device.deviceNetworkId} 1 1", "delay 500",
+        
+        "zcl global send-me-a-report 0x0F 0x55 0x10 1 0 {01}", "delay 500",
+        "send 0x${device.deviceNetworkId} 1 1", "delay 500",
+       
+        "zcl global send-me-a-report 0x0F 0x55 0x10 1 0 {01}", "delay 500",
+        "send 0x${device.deviceNetworkId} 1 2", "delay 500",
+        
+        "zcl global send-me-a-report 0x0F 0x55 0x10 1 0 {01}", "delay 500",
+        "send 0x${device.deviceNetworkId} 1 3", "delay 500",
+        
+        "zcl global send-me-a-report 0x0F 0x55 0x10 1 0 {01}", "delay 500",
+        "send 0x${device.deviceNetworkId} 1 4", "delay 500",
+        
+        "zcl global send-me-a-report 0x0F 0x55 0x10 1 0 {01}", "delay 500",
+        "send 0x${device.deviceNetworkId} 1 5", "delay 500",
+        
+        "zcl global send-me-a-report 0x0F 0x55 0x10 1 0 {01}", "delay 500",
+        "send 0x${device.deviceNetworkId} 1 6", "delay 500",
+        
+        "zcl global send-me-a-report 0x0F 0x55 0x10 1 0 {01}", "delay 500",
+        "send 0x${device.deviceNetworkId} 1 7", "delay 500",
+        
+        "zcl global send-me-a-report 0x0F 0x55 0x10 1 0 {01}", "delay 500",
+        "send 0x${device.deviceNetworkId} 1 8", "delay 500",      
+        
+        
+        "zcl global send-me-a-report 0x0F 0x55 0x10 1 0 {01}", "delay 500",
+        "send 0x${device.deviceNetworkId} 1 9", "delay 500",
+       
+        "zcl global send-me-a-report 0x0F 0x55 0x10 1 0 {01}", "delay 500",
+        "send 0x${device.deviceNetworkId} 1 10", "delay 500",
+        
+        "zcl global send-me-a-report 0x0F 0x55 0x10 1 0 {01}", "delay 500",
+        "send 0x${device.deviceNetworkId} 1 11", "delay 500",
+        
+        "zcl global send-me-a-report 0x0F 0x55 0x10 1 0 {01}", "delay 500",
+        "send 0x${device.deviceNetworkId} 1 12", "delay 500",
+        
+        "zcl global send-me-a-report 0x0F 0x55 0x10 1 0 {01}", "delay 500",
+        "send 0x${device.deviceNetworkId} 1 13", "delay 500",
+        
+        "zcl global send-me-a-report 0x0F 0x55 0x10 1 0 {01}", "delay 500",
+        "send 0x${device.deviceNetworkId} 1 14", "delay 500",
+        
+        "zcl global send-me-a-report 0x0F 0x55 0x10 1 0 {01}", "delay 500",
+        "send 0x${device.deviceNetworkId} 1 15", "delay 500",
+        
+        "zcl global send-me-a-report 0x0F 0x55 0x10 1 0 {01}", "delay 500",
+        "send 0x${device.deviceNetworkId} 1 16", "delay 500",
+        
+        "zcl global send-me-a-report 0x0F 0x55 0x10 1 0 {01}", "delay 500",
+        "send 0x${device.deviceNetworkId} 1 17", "delay 500",
+        
+        "zcl global send-me-a-report 0x0F 0x55 0x10 1 0 {01}", "delay 500",
+        "send 0x${device.deviceNetworkId} 1 18", "delay 500",
+        
+        "zcl global send-me-a-report 0x09 0x00 0x21 1 0 {00}", "delay 500",
+        "send 0x${device.deviceNetworkId} 1 1", "delay 500"
+	]
+    return configCmds + rain() + manual()
+}
+
+
+
+private hex(value) {
+	new BigInteger(Math.round(value).toString()).toString(16)
+}
+
+private String swapEndianHex(String hex) {
+    reverseArray(hex.decodeHex()).encodeHex()
+}
+
+private byte[] reverseArray(byte[] array) {
+    int i = 0;
+    int j = array.length - 1;
+    byte tmp;
+    while (j > i) {
+        tmp = array[j];
+        array[j] = array[i];
+        array[i] = tmp;
+        j--;
+        i++;
+    }
+    return array
+}    
+
+def refresh() {
+
+	log.debug "refresh"
+    def refreshCmds = [
+	        
+        "st rattr 0x${device.deviceNetworkId} 1 0x0F 0x55", "delay 500",
+        
+        "st rattr 0x${device.deviceNetworkId} 2 0x0F 0x55", "delay 500",
+        "st rattr 0x${device.deviceNetworkId} 3 0x0F 0x55", "delay 500",
+        "st rattr 0x${device.deviceNetworkId} 4 0x0F 0x55", "delay 500",
+        "st rattr 0x${device.deviceNetworkId} 5 0x0F 0x55", "delay 500",
+        "st rattr 0x${device.deviceNetworkId} 6 0x0F 0x55", "delay 500",        
+        "st rattr 0x${device.deviceNetworkId} 7 0x0F 0x55", "delay 500",
+        "st rattr 0x${device.deviceNetworkId} 8 0x0F 0x55", "delay 500",        
+        "st rattr 0x${device.deviceNetworkId} 9 0x0F 0x55", "delay 500",
+        
+        "st rattr 0x${device.deviceNetworkId} 10 0x0F 0x55", "delay 500",
+        "st rattr 0x${device.deviceNetworkId} 11 0x0F 0x55", "delay 500",
+        "st rattr 0x${device.deviceNetworkId} 12 0x0F 0x55", "delay 500",
+        "st rattr 0x${device.deviceNetworkId} 13 0x0F 0x55", "delay 500",
+        "st rattr 0x${device.deviceNetworkId} 14 0x0F 0x55", "delay 500",        
+        "st rattr 0x${device.deviceNetworkId} 15 0x0F 0x55", "delay 500",
+        "st rattr 0x${device.deviceNetworkId} 16 0x0F 0x55", "delay 500",
+        "st rattr 0x${device.deviceNetworkId} 17 0x0F 0x55", "delay 500",
+        
+        "st rattr 0x${device.deviceNetworkId} 18 0x0F 0x51","delay 500",
+ 	
+    ]
+    return refreshCmds + rain() + manual()
+}
+
+// Commands to device
+//zones on - 8
+def on() {
+    //sendEvent(name:"status", value:"active", descriptionText:"Program Running", isStateChange: true, display: false)
+    log.debug "on"
+    "st cmd 0x${device.deviceNetworkId} 1 6 1 {}"    
+}
+def off() {
+    log.debug "off"
+    "st cmd 0x${device.deviceNetworkId} 1 6 0 {}"    
+}
+def z1on() {	
+    "st cmd 0x${device.deviceNetworkId} 2 6 1 {}"
+}
+def z1off() {    
+    "st cmd 0x${device.deviceNetworkId} 2 6 0 {}"
+}
+def z2on() {	
+    "st cmd 0x${device.deviceNetworkId} 3 6 1 {}"    
+}
+def z2off() {    
+    "st cmd 0x${device.deviceNetworkId} 3 6 0 {}"    
+}
+def z3on() {        
+    "st cmd 0x${device.deviceNetworkId} 4 6 1 {}"    
+}
+def z3off() {	
+    "st cmd 0x${device.deviceNetworkId} 4 6 0 {}"    
+}
+def z4on() {	
+    "st cmd 0x${device.deviceNetworkId} 5 6 1 {}"    
+}
+def z4off() {    
+    "st cmd 0x${device.deviceNetworkId} 5 6 0 {}"    
+}
+def z5on() {	
+	"st cmd 0x${device.deviceNetworkId} 6 6 1 {}"   
+}
+def z5off() {
+	"st cmd 0x${device.deviceNetworkId} 6 6 0 {}"    
+}
+def z6on() {
+	"st cmd 0x${device.deviceNetworkId} 7 6 1 {}"
+}
+def z6off() {
+    "st cmd 0x${device.deviceNetworkId} 7 6 0 {}"
+}
+def z7on() {
+	"st cmd 0x${device.deviceNetworkId} 8 6 1 {}"  
+}
+def z7off() {
+	"st cmd 0x${device.deviceNetworkId} 8 6 0 {}"    
+}
+def z8on() {
+	"st cmd 0x${device.deviceNetworkId} 9 6 1 {}"    
+}
+def z8off() {
+	"st cmd 0x${device.deviceNetworkId} 9 6 0 {}"    
+}
+
+//zones 9 - 16
+def z9on() {	
+    "st cmd 0x${device.deviceNetworkId} 10 6 1 {}"    
+}
+def z9off() {	    
+    "st cmd 0x${device.deviceNetworkId} 10 6 0 {}"   
+}
+def z10on() {	
+    "st cmd 0x${device.deviceNetworkId} 11 6 1 {}"    
+}
+def z10off() {    
+    "st cmd 0x${device.deviceNetworkId} 11 6 0 {}"    
+}
+def z11on() {        
+    "st cmd 0x${device.deviceNetworkId} 12 6 1 {}"    
+}
+def z11off() {	
+    "st cmd 0x${device.deviceNetworkId} 12 6 0 {}"    
+}
+def z12on() {	
+    "st cmd 0x${device.deviceNetworkId} 13 6 1 {}"    
+}
+def z12off() {    
+    "st cmd 0x${device.deviceNetworkId} 13 6 0 {}"    
+}
+def z13on() {	
+	"st cmd 0x${device.deviceNetworkId} 14 6 1 {}"   
+}
+def z13off() {
+	"st cmd 0x${device.deviceNetworkId} 14 6 0 {}"    
+}
+def z14on() {
+	"st cmd 0x${device.deviceNetworkId} 15 6 1 {}"
+}
+def z14off() {
+    "st cmd 0x${device.deviceNetworkId} 15 6 0 {}"
+}
+def z15on() {
+	"st cmd 0x${device.deviceNetworkId} 16 6 1 {}"  
+}
+def z15off() {
+	"st cmd 0x${device.deviceNetworkId} 16 6 0 {}"    
+}
+def z16on() {
+	"st cmd 0x${device.deviceNetworkId} 17 6 1 {}"    
+}
+def z16off() {
+	"st cmd 0x${device.deviceNetworkId} 17 6 0 {}"    
+}

devicetypes/plaidsystems/spruce-sensor.src/spruce-sensor.groovy

@@ -0,0 +1,397 @@
+/**
+ *  Spruce Sensor -Pre-release V2 10/8/2015
+ *
+ *  Copyright 2014 Plaid Systems
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ -------10/20/2015 Updates--------
+ -Fix/add battery reporting interval to update
+ -remove polling and/or refresh(?)
+ */
+metadata {
+	definition (name: "Spruce Sensor", namespace: "plaidsystems", author: "NCauffman") {
+		
+		capability "Configuration"
+		capability "Battery"
+        capability "Relative Humidity Measurement"
+        capability "Temperature Measurement"
+        capability "Sensor"
+        //capability "Polling"
+		
+        attribute "maxHum", "string"
+        attribute "minHum", "string"        
+        
+        command "resetHumidity"
+        command "refresh"
+        
+        fingerprint profileId: "0104", inClusters: "0000,0001,0003,0402,0405", outClusters: "0003, 0019", manufacturer: "PLAID SYSTEMS", model: "PS-SPRZMS-01"
+	}
+
+	preferences {
+		input description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph", title: ""
+		input "tempOffset", "number", title: "Temperature Offset", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
+        input "interval", "number", title: "Measurement Interval 1-120 minutes (default: 10 minutes)", description: "Set how often you would like to check soil moisture in minutes", range: "1..120", defaultValue: 10, displayDuringSetup: false
+        input "resetMinMax", "bool", title: "Reset Humidity min and max", required: false, displayDuringSetup: false
+      }
+
+	tiles {
+		valueTile("temperature", "device.temperature", canChangeIcon: false, canChangeBackground: false) {
+			state "temperature", label:'${currentValue}°',
+				backgroundColors:[
+					[value: 31, color: "#153591"],
+					[value: 44, color: "#1e9cbb"],
+					[value: 59, color: "#90d2a7"],
+					[value: 74, color: "#44b621"],
+					[value: 84, color: "#f1d801"],
+					[value: 95, color: "#d04e00"],
+					[value: 96, color: "#bc2323"]
+				]
+		}
+		valueTile("humidity", "device.humidity", width: 2, height: 2, canChangeIcon: false, canChangeBackground: true) {
+			state "humidity", label:'${currentValue}%', unit:"",
+            	backgroundColors:[
+					[value: 0, color: "#635C0C"],
+					[value: 16, color: "#EBEB21"],
+					[value: 22, color: "#C7DE6A"],
+					[value: 42, color: "#9AD290"],
+					[value: 64, color: "#44B621"],
+					[value: 80, color: "#3D79D9"],
+					[value: 96, color: "#0A50C2"]
+				]
+		}
+        
+        valueTile("maxHum", "device.maxHum", canChangeIcon: false, canChangeBackground: false) {
+			state "maxHum", label:'High ${currentValue}%', unit:"",
+            	backgroundColors:[
+					[value: 0, color: "#635C0C"],
+					[value: 16, color: "#EBEB21"],
+					[value: 22, color: "#C7DE6A"],
+					[value: 42, color: "#9AD290"],
+					[value: 64, color: "#44B621"],
+					[value: 80, color: "#3D79D9"],
+					[value: 96, color: "#0A50C2"]
+				]
+		}
+		valueTile("minHum", "device.minHum", canChangeIcon: false, canChangeBackground: false) {
+			state "minHum", label:'Low ${currentValue}%', unit:"",
+            	backgroundColors:[
+					[value: 0, color: "#635C0C"],
+					[value: 16, color: "#EBEB21"],
+					[value: 22, color: "#C7DE6A"],
+					[value: 42, color: "#9AD290"],
+					[value: 64, color: "#44B621"],
+					[value: 80, color: "#3D79D9"],
+					[value: 96, color: "#0A50C2"]
+				]
+		} 
+ 
+		valueTile("battery", "device.battery", decoration: "flat", canChangeIcon: false, canChangeBackground: false) {
+			state "battery", label:'${currentValue}% battery'
+		}
+        
+		main  (["humidity"])
+		details(["humidity","maxHum","minHum","temperature","battery"])
+	}
+}
+
+def parse(String description) {
+	log.debug "Parse description $description config: ${device.latestValue('configuration')} interval: $interval"      
+    
+    Map map = [:]
+    
+    if (description?.startsWith('catchall:')) {
+		map = parseCatchAllMessage(description)
+	}
+	else if (description?.startsWith('read attr -')) {
+		map = parseReportAttributeMessage(description)
+	}    
+	else if (description?.startsWith('temperature: ') || description?.startsWith('humidity: ')) {
+		map = parseCustomMessage(description)
+	}
+    def result = map ? createEvent(map) : null
+ 	
+    //check in configuration change
+    if (!device.latestValue('configuration')) result = poll()
+    if (device.latestValue('configuration').toInteger() != interval && interval != null) {  	
+        result = poll()            
+    }
+ 	log.debug "result: $result"
+    return result
+    
+}
+
+
+
+private Map parseCatchAllMessage(String description) {
+    Map resultMap = [:]
+    def linkText = getLinkText(device)
+	//log.debug "Catchall"
+    def descMap = zigbee.parse(description)
+    
+    //check humidity configuration is complete
+    if (descMap.command == 0x07 && descMap.clusterId == 0x0405){    	
+        def configInterval = 10
+        if (interval != null) configInterval = interval        
+        sendEvent(name: 'configuration',value: configInterval, descriptionText: "Configuration Successful")        
+        //setConfig()
+        log.debug "config complete"        
+        //return resultMap = [name: 'configuration', value: configInterval, descriptionText: "Settings configured successfully"]                
+    }
+    else if (descMap.command == 0x0001){    
+    	def hexString = "${hex(descMap.data[5])}" + "${hex(descMap.data[4])}"
+    	def intString = Integer.parseInt(hexString, 16)    
+    	//log.debug "command: $descMap.command clusterid: $descMap.clusterId $hexString $intString"
+    
+    	if (descMap.clusterId == 0x0402){    	
+            def value = getTemperature(hexString)
+            resultMap = getTemperatureResult(value)    
+        }
+        else if (descMap.clusterId == 0x0405){
+            def value = Math.round(new BigDecimal(intString / 100)).toString()
+            resultMap = getHumidityResult(value)
+
+        }
+        else return null
+    }
+    else return null 
+    
+    return resultMap
+}    
+    
+private Map parseReportAttributeMessage(String description) {	
+    def descMap = parseDescriptionAsMap(description)
+	log.debug "Desc Map: $descMap"
+    log.debug "Report Attributes"
+ 
+	Map resultMap = [:]
+	if (descMap.cluster == "0001" && descMap.attrId == "0000") {		
+        resultMap = getBatteryResult(descMap.value)
+	}    
+    return resultMap
+}
+
+def parseDescriptionAsMap(description) {
+	(description - "read attr - ").split(",").inject([:]) { map, param ->
+		def nameAndValue = param.split(":")
+		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
+	}
+}
+
+private Map parseCustomMessage(String description) {
+	Map resultMap = [:]  
+        
+	log.debug "parseCustom"
+	if (description?.startsWith('temperature: ')) {
+		def value = zigbee.parseHATemperatureValue(description, "temperature: ", getTemperatureScale())
+		resultMap = getTemperatureResult(value)
+	}
+	else if (description?.startsWith('humidity: ')) {
+		def pct = (description - "humidity: " - "%").trim()
+		if (pct.isNumber()) {        	
+            def value = Math.round(new BigDecimal(pct)).toString()
+			resultMap = getHumidityResult(value)
+		} else {
+			log.error "invalid humidity: ${pct}"
+		}    
+	}
+	return resultMap
+}
+ 
+private Map getHumidityResult(value) {
+    def linkText = getLinkText(device)
+    def maxHumValue = 0
+    def minHumValue = 0
+    if (device.currentValue("maxHum") != null) maxHumValue = device.currentValue("maxHum").toInteger()
+    if (device.currentValue("minHum") != null) minHumValue = device.currentValue("minHum").toInteger()
+    log.debug "Humidity max: ${maxHumValue} min: ${minHumValue}"
+    def compare = value.toInteger()
+    
+    if (compare > maxHumValue) {
+        sendEvent(name: 'maxHum', value: value, unit: '%', descriptionText: "${linkText} soil moisture high is ${value}%")
+        }
+    else if (((compare < minHumValue) || (minHumValue <= 2)) && (compare != 0)) {
+        sendEvent(name: 'minHum', value: value, unit: '%', descriptionText: "${linkText} soil moisture low is ${value}%")
+        }    
+    
+    return [
+    	name: 'humidity',
+    	value: value,
+    	unit: '%',
+        descriptionText: "${linkText} soil moisture is ${value}%"
+    ]
+}
+
+
+
+def getTemperature(value) {
+	def celsius = (Integer.parseInt(value, 16).shortValue()/100)
+    //log.debug "Report Temp $value : $celsius C"
+	if(getTemperatureScale() == "C"){
+		return celsius
+	} else {
+		return celsiusToFahrenheit(celsius) as Integer
+	}
+}
+
+private Map getTemperatureResult(value) {
+	log.debug "Temperature: $value"
+	def linkText = getLinkText(device)
+        
+	if (tempOffset) {
+		def offset = tempOffset as int
+		def v = value as int
+		value = v + offset        
+	}
+	def descriptionText = "${linkText} is ${value}°${temperatureScale}"
+	return [
+		name: 'temperature',
+		value: value,
+		descriptionText: descriptionText
+	]
+}
+
+private Map getBatteryResult(value) {
+	log.debug 'Battery'
+	def linkText = getLinkText(device)
+        
+    def result = [
+    	name: 'battery'
+    ]
+    	
+	def min = 2500   
+	def percent = ((Integer.parseInt(value, 16) - min) / 5)
+	percent = Math.max(0, Math.min(percent, 100.0))
+    result.value = Math.round(percent)
+    
+    def descriptionText
+    if (percent < 10) result.descriptionText = "${linkText} battery is getting low $percent %."
+	else result.descriptionText = "${linkText} battery is ${result.value}%"
+	
+	return result
+}
+
+def resetHumidity(){
+	def linkText = getLinkText(device)
+    def minHumValue = 0
+    def maxHumValue = 0
+    sendEvent(name: 'minHum', value: minHumValue, unit: '%', descriptionText: "${linkText} min soil moisture reset to ${minHumValue}%")
+    sendEvent(name: 'maxHum', value: maxHumValue, unit: '%', descriptionText: "${linkText} max soil moisture reset to ${maxHumValue}%")
+}	
+
+def setConfig(){
+	def configInterval = 100
+    if (interval != null) configInterval = interval        
+    sendEvent(name: 'configuration',value: configInterval, descriptionText: "Configuration initialized")
+}
+
+//when device preferences are changed
+def updated(){	
+    log.debug "device updated"
+    if (!device.latestValue('configuration')) configure()
+    else{
+    	if (resetMinMax == true) resetHumidity()
+        if (device.latestValue('configuration').toInteger() != interval && interval != null){    	
+            sendEvent(name: 'configuration',value: 0, descriptionText: "Settings changed and will update at next report. Measure interval set to ${interval} mins")
+    	}
+    }
+}
+
+//poll
+def poll() {
+	log.debug "poll called"
+    List cmds = []
+    if (!device.latestValue('configuration')) cmds += configure()
+    else if (device.latestValue('configuration').toInteger() != interval && interval != null) { 
+    	cmds += intervalUpdate()
+    }
+    //cmds += refresh()
+    log.debug "commands $cmds"
+    return cmds?.collect { new physicalgraph.device.HubAction(it) }    
+}
+
+//update intervals
+def intervalUpdate(){
+	log.debug "intervalUpdate"
+    def minReport = 10
+    def maxReport = 610
+    if (interval != null) {
+    	minReport = interval
+        maxReport = interval * 61
+    }
+    [    
+    	"zcl global send-me-a-report 0x405 0x0000 0x21 $minReport $maxReport {6400}", "delay 500",
+    	"send 0x${device.deviceNetworkId} 1 1", "delay 500",
+        "zcl global send-me-a-report 1 0x0000 0x21 0x0C 0 {0500}", "delay 500",
+        "send 0x${device.deviceNetworkId} 1 1", "delay 500",
+    ]    
+}
+
+def refresh() {
+	log.debug "refresh"
+    [
+        "st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 500",
+        "st rattr 0x${device.deviceNetworkId} 1 0x405 0", "delay 500",    
+        "st rattr 0x${device.deviceNetworkId} 1 1 0"
+    ]    
+}
+
+//configure
+def configure() {
+	//set minReport = measurement in minutes
+    def minReport = 10
+    def maxReport = 610
+	    
+    //String zigbeeId = swapEndianHex(device.hub.zigbeeId)
+	//log.debug "zigbeeid ${device.zigbeeId} deviceId ${device.deviceNetworkId}"
+    if (!device.zigbeeId) sendEvent(name: 'configuration',value: 0, descriptionText: "Device Zigbee Id not found, remove and attempt to rejoin device")
+    else sendEvent(name: 'configuration',value: 100, descriptionText: "Configuration initialized")
+    //log.debug "Configuring Reporting and Bindings. min: $minReport max: $maxReport "
+	
+    [
+        "zdo bind 0x${device.deviceNetworkId} 1 1 0x402 {${device.zigbeeId}} {}", "delay 500",
+        "zdo bind 0x${device.deviceNetworkId} 1 1 0x405 {${device.zigbeeId}} {}", "delay 500",                
+		"zdo bind 0x${device.deviceNetworkId} 1 1 1 {${device.zigbeeId}} {}", "delay 1000",
+        
+        //temperature
+        "zcl global send-me-a-report 0x402 0x0000 0x29 1 0 {3200}",
+        "send 0x${device.deviceNetworkId} 1 1", "delay 500",
+        
+        //min = soil measure interval
+        "zcl global send-me-a-report 0x405 0x0000 0x21 $minReport $maxReport {6400}",        
+        "send 0x${device.deviceNetworkId} 1 1", "delay 500",       
+     
+        //min = battery measure interval  1 = 1 hour     
+        "zcl global send-me-a-report 1 0x0000 0x21 0x0C 0 {0500}",
+        "send 0x${device.deviceNetworkId} 1 1", "delay 500"
+	] + refresh()
+}
+
+private hex(value) {
+	new BigInteger(Math.round(value).toString()).toString(16)
+}
+
+private String swapEndianHex(String hex) {
+    reverseArray(hex.decodeHex()).encodeHex()
+}
+
+private byte[] reverseArray(byte[] array) {
+    int i = 0;
+    int j = array.length - 1;
+    byte tmp;
+    while (j > i) {
+        tmp = array[j];
+        array[j] = array[i];
+        array[i] = tmp;
+        j--;
+        i++;
+    }
+    return array
+}

devicetypes/smartthings/ecobee-sensor.src/ecobee-sensor.groovy

@@ -22,10 +22,6 @@ metadata {
 		capability "Polling"
 	}
 
-	simulator {
-		// TODO: define status and reply messages here
-	}
-
 	tiles {
 		valueTile("temperature", "device.temperature", width: 2, height: 2) {
 			state("temperature", label:'${currentValue}°', unit:"F",
@@ -56,16 +52,12 @@ metadata {
 }
 
 def refresh() {
-	log.debug "refresh..."
+	log.debug "refresh called"
 	poll()
 }
 
 void poll() {
 	log.debug "Executing 'poll' using parent SmartApp"
-	parent.pollChildren(this)
-}
+	parent.pollChild(this)
 
-//generate custom mobile activity feeds event
-def generateActivityFeedsEvent(notificationMessage) {
-	sendEvent(name: "notificationMessage", value: "$device.displayName $notificationMessage", descriptionText: "$device.displayName $notificationMessage", displayed: true)
 }

devicetypes/smartthings/ecobee-thermostat.src/ecobee-thermostat.groovy

@@ -19,34 +19,40 @@ metadata {
 	definition (name: "Ecobee Thermostat", namespace: "smartthings", author: "SmartThings") {
 		capability "Actuator"
 		capability "Thermostat"
+		capability "Temperature Measurement"
 		capability "Polling"
 		capability "Sensor"
-        capability "Refresh"
+		capability "Refresh"
+		capability "Relative Humidity Measurement"
 
-        command "generateEvent"
-        command "raiseSetpoint"
-        command "lowerSetpoint"
-        command "resumeProgram"
-        command "switchMode"
+		command "generateEvent"
+		command "raiseSetpoint"
+		command "lowerSetpoint"
+		command "resumeProgram"
+		command "switchMode"
+		command "switchFanMode"
 
-        attribute "thermostatSetpoint","number"
-        attribute "thermostatStatus","string"
+		attribute "thermostatSetpoint","number"
+		attribute "thermostatStatus","string"
+		attribute "maxHeatingSetpoint", "number"
+		attribute "minHeatingSetpoint", "number"
+		attribute "maxCoolingSetpoint", "number"
+		attribute "minCoolingSetpoint", "number"
+		attribute "deviceTemperatureUnit", "number"
 	}
 
-	simulator { }
-
-    	tiles {
+	tiles {
 		valueTile("temperature", "device.temperature", width: 2, height: 2) {
 			state("temperature", label:'${currentValue}°', unit:"F",
-                backgroundColors:[
-                    [value: 31, color: "#153591"],
-                    [value: 44, color: "#1e9cbb"],
-                    [value: 59, color: "#90d2a7"],
-                    [value: 74, color: "#44b621"],
-                    [value: 84, color: "#f1d801"],
-                    [value: 95, color: "#d04e00"],
-                    [value: 96, color: "#bc2323"]
-                ]
+					backgroundColors:[
+							[value: 31, color: "#153591"],
+							[value: 44, color: "#1e9cbb"],
+							[value: 59, color: "#90d2a7"],
+							[value: 74, color: "#44b621"],
+							[value: 84, color: "#f1d801"],
+							[value: 95, color: "#d04e00"],
+							[value: 96, color: "#bc2323"]
+					]
 			)
 		}
 		standardTile("mode", "device.thermostatMode", inactiveLabel: false, decoration: "flat") {
@@ -58,10 +64,9 @@ metadata {
 			state "updating", label:"Working", icon: "st.secondary.secondary"
 		}
 		standardTile("fanMode", "device.thermostatFanMode", inactiveLabel: false, decoration: "flat") {
-			state "auto", label:'Fan: ${currentValue}', action:"switchFanMode", nextState: "on"
-			state "on", label:'Fan: ${currentValue}', action:"switchFanMode", nextState: "off"
-			state "off", label:'Fan: ${currentValue}', action:"switchFanMode", nextState: "circulate"
-			state "circulate", label:'Fan: ${currentValue}', action:"switchFanMode", nextState: "auto"
+			state "auto", action:"switchFanMode", nextState: "updating", icon: "st.thermostat.fan-auto"
+			state "on", action:"switchFanMode", nextState: "updating", icon: "st.thermostat.fan-on"
+			state "updating", label:"Working", icon: "st.secondary.secondary"
 		}
 		standardTile("upButtonControl", "device.thermostatSetpoint", inactiveLabel: false, decoration: "flat") {
 			state "setpoint", action:"raiseSetpoint", icon:"st.thermostat.thermostat-up"
@@ -91,11 +96,14 @@ metadata {
 			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
 		standardTile("resumeProgram", "device.resumeProgram", inactiveLabel: false, decoration: "flat") {
-			state "resume", action:"resumeProgram", nextState: "updating", label:'Resume Schedule', icon:"st.samsung.da.oven_ic_send"
+			state "resume", action:"resumeProgram", nextState: "updating", label:'Resume', icon:"st.samsung.da.oven_ic_send"
 			state "updating", label:"Working", icon: "st.secondary.secondary"
 		}
+		valueTile("humidity", "device.humidity", decoration: "flat") {
+			state "humidity", label:'${currentValue}%'
+		}
 		main "temperature"
-		details(["temperature", "upButtonControl", "thermostatSetpoint", "currentStatus", "downButtonControl", "mode", "resumeProgram", "refresh"])
+		details(["temperature", "upButtonControl", "thermostatSetpoint", "currentStatus", "downButtonControl", "mode", "fanMode","humidity", "resumeProgram", "refresh"])
 	}
 
 	preferences {
@@ -107,8 +115,6 @@ metadata {
 // parse events into attributes
 def parse(String description) {
 	log.debug "Parsing '${description}'"
-	// TODO: handle '' attribute
-
 }
 
 def refresh() {
@@ -133,16 +139,27 @@ def generateEvent(Map results) {
 			def isChange = false
 			def isDisplayed = true
 			def event = [name: name, linkText: linkText, descriptionText: getThermostatDescriptionText(name, value, linkText),
-			handlerName: name]
+						 handlerName: name]
 
-			if (name=="temperature" || name=="heatingSetpoint" || name=="coolingSetpoint") {
-				def sendValue = value? convertTemperatureIfNeeded(value.toDouble(), "F", 1): value //API return temperature value in F
+			if (name=="temperature" || name=="heatingSetpoint" || name=="coolingSetpoint" ) {
+				def sendValue = convertTemperatureIfNeeded(value.toDouble(), "F", 1) //API return temperature value in F
+				sendValue =  location.temperatureScale == "C"? roundC(sendValue) : sendValue
 				isChange = isTemperatureStateChange(device, name, value.toString())
 				isDisplayed = isChange
 				event << [value: sendValue, isStateChange: isChange, displayed: isDisplayed]
-			} else if (name=="heatMode" || name=="coolMode" || name=="autoMode" || name=="auxHeatMode"){
+			}  else if (name=="maxCoolingSetpoint" || name=="minCoolingSetpoint" || name=="maxHeatingSetpoint" || name=="minHeatingSetpoint") {
+				def sendValue = convertTemperatureIfNeeded(value.toDouble(), "F", 1) //API return temperature value in F
+				sendValue =  location.temperatureScale == "C"? roundC(sendValue) : sendValue
+				event << [value: sendValue, displayed: false]
+			}  else if (name=="heatMode" || name=="coolMode" || name=="autoMode" || name=="auxHeatMode"){
 				isChange = isStateChange(device, name, value.toString())
 				event << [value: value.toString(), isStateChange: isChange, displayed: false]
+			}  else if (name=="thermostatFanMode"){
+				isChange = isStateChange(device, name, value.toString())
+				event << [value: value.toString(), isStateChange: isChange, displayed: false]
+			}  else if (name=="humidity") {
+				isChange = isStateChange(device, name, value.toString())
+				event << [value: value.toString(), isStateChange: isChange, displayed: false, unit: "%"]
 			}  else {
 				isChange = isStateChange(device, name, value.toString())
 				isDisplayed = isChange
@@ -158,13 +175,19 @@ def generateEvent(Map results) {
 //return descriptionText to be shown on mobile activity feed
 private getThermostatDescriptionText(name, value, linkText) {
 	if(name == "temperature") {
-		return "$linkText temperature is $value°F"
+		def sendValue = convertTemperatureIfNeeded(value.toDouble(), "F", 1) //API return temperature value in F
+		sendValue =  location.temperatureScale == "C"? roundC(sendValue) : sendValue
+		return "$linkText temperature is $sendValue ${location.temperatureScale}"
 
 	} else if(name == "heatingSetpoint") {
-		return "heating setpoint is $value°F"
+		def sendValue = convertTemperatureIfNeeded(value.toDouble(), "F", 1) //API return temperature value in F
+		sendValue =  location.temperatureScale == "C"? roundC(sendValue) : sendValue
+		return "heating setpoint is $sendValue ${location.temperatureScale}"
 
 	} else if(name == "coolingSetpoint"){
-		return "cooling setpoint is $value°F"
+		def sendValue = convertTemperatureIfNeeded(value.toDouble(), "F", 1) //API return temperature value in F
+		sendValue =  location.temperatureScale == "C"? roundC(sendValue) : sendValue
+		return "cooling setpoint is $sendValue ${location.temperatureScale}"
 
 	} else if (name == "thermostatMode") {
 		return "thermostat mode is ${value}"
@@ -172,26 +195,26 @@ private getThermostatDescriptionText(name, value, linkText) {
 	} else if (name == "thermostatFanMode") {
 		return "thermostat fan mode is ${value}"
 
+	} else if (name == "humidity") {
+		return "humidity is ${value} %"
 	} else {
 		return "${name} = ${value}"
 	}
 }
 
 void setHeatingSetpoint(setpoint) {
-	setHeatingSetpoint(setpoint.toDouble())
-}
-
-void setHeatingSetpoint(Double setpoint) {
-//    def mode = device.currentValue("thermostatMode")
+	log.debug "***heating setpoint $setpoint"
 	def heatingSetpoint = setpoint
-	def coolingSetpoint = device.currentValue("coolingSetpoint").toDouble()
+	def coolingSetpoint = device.currentValue("coolingSetpoint")
 	def deviceId = device.deviceNetworkId.split(/\./).last()
+	def maxHeatingSetpoint = device.currentValue("maxHeatingSetpoint")
+	def minHeatingSetpoint = device.currentValue("minHeatingSetpoint")
 
 	//enforce limits of heatingSetpoint
-	if (heatingSetpoint > 79) {
-		heatingSetpoint = 79
-	} else if (heatingSetpoint < 45) {
-		heatingSetpoint = 45
+	if (heatingSetpoint > maxHeatingSetpoint) {
+		heatingSetpoint = maxHeatingSetpoint
+	} else if (heatingSetpoint < minHeatingSetpoint) {
+		heatingSetpoint = minHeatingSetpoint
 	}
 
 	//enforce limits of heatingSetpoint vs coolingSetpoint
@@ -201,32 +224,34 @@ void setHeatingSetpoint(Double setpoint) {
 
 	log.debug "Sending setHeatingSetpoint> coolingSetpoint: ${coolingSetpoint}, heatingSetpoint: ${heatingSetpoint}"
 
+	def coolingValue = location.temperatureScale == "C"? convertCtoF(coolingSetpoint) : coolingSetpoint
+	def heatingValue = location.temperatureScale == "C"? convertCtoF(heatingSetpoint) : heatingSetpoint
+
 	def sendHoldType = holdType ? (holdType=="Temporary")? "nextTransition" : (holdType=="Permanent")? "indefinite" : "indefinite" : "indefinite"
-	if (parent.setHold (this, heatingSetpoint,  coolingSetpoint, deviceId, sendHoldType)) {
+	if (parent.setHold(this, heatingValue, coolingValue, deviceId, sendHoldType)) {
 		sendEvent("name":"heatingSetpoint", "value":heatingSetpoint)
 		sendEvent("name":"coolingSetpoint", "value":coolingSetpoint)
 		log.debug "Done setHeatingSetpoint> coolingSetpoint: ${coolingSetpoint}, heatingSetpoint: ${heatingSetpoint}"
 		generateSetpointEvent()
 		generateStatusEvent()
 	} else {
-		log.error "Error setHeatingSetpoint(setpoint)" //This error is handled by the connect app
+		log.error "Error setHeatingSetpoint(setpoint)"
 	}
 }
 
 void setCoolingSetpoint(setpoint) {
-	setCoolingSetpoint(setpoint.toDouble())
-}
-
-void setCoolingSetpoint(Double setpoint) {
-//    def mode = device.currentValue("thermostatMode")
-	def heatingSetpoint = device.currentValue("heatingSetpoint").toDouble()
+	log.debug "***cooling setpoint $setpoint"
+	def heatingSetpoint = device.currentValue("heatingSetpoint")
 	def coolingSetpoint = setpoint
 	def deviceId = device.deviceNetworkId.split(/\./).last()
+	def maxCoolingSetpoint = device.currentValue("maxCoolingSetpoint")
+	def minCoolingSetpoint = device.currentValue("minCoolingSetpoint")
 
-	if (coolingSetpoint > 92) {
-		coolingSetpoint = 92
-	} else if (coolingSetpoint < 65) {
-		coolingSetpoint = 65
+
+	if (coolingSetpoint > maxCoolingSetpoint) {
+		coolingSetpoint = maxCoolingSetpoint
+	} else if (coolingSetpoint < minCoolingSetpoint) {
+		coolingSetpoint = minCoolingSetpoint
 	}
 
 	//enforce limits of heatingSetpoint vs coolingSetpoint
@@ -236,15 +261,18 @@ void setCoolingSetpoint(Double setpoint) {
 
 	log.debug "Sending setCoolingSetpoint> coolingSetpoint: ${coolingSetpoint}, heatingSetpoint: ${heatingSetpoint}"
 
+	def coolingValue = location.temperatureScale == "C"? convertCtoF(coolingSetpoint) : coolingSetpoint
+	def heatingValue = location.temperatureScale == "C"? convertCtoF(heatingSetpoint) : heatingSetpoint
+
 	def sendHoldType = holdType ? (holdType=="Temporary")? "nextTransition" : (holdType=="Permanent")? "indefinite" : "indefinite" : "indefinite"
-	if (parent.setHold (this, heatingSetpoint,  coolingSetpoint, deviceId, sendHoldType)) {
+	if (parent.setHold(this, heatingValue, coolingValue, deviceId, sendHoldType)) {
 		sendEvent("name":"heatingSetpoint", "value":heatingSetpoint)
 		sendEvent("name":"coolingSetpoint", "value":coolingSetpoint)
 		log.debug "Done setCoolingSetpoint>> coolingSetpoint = ${coolingSetpoint}, heatingSetpoint = ${heatingSetpoint}"
 		generateSetpointEvent()
 		generateStatusEvent()
 	} else {
-		log.error "Error setCoolingSetpoint(setpoint)" //This error is handled by the connect app
+		log.error "Error setCoolingSetpoint(setpoint)"
 	}
 }
 
@@ -278,7 +306,7 @@ def modes() {
 }
 
 def fanModes() {
-	["off", "on", "auto", "circulate"]
+	["on", "auto"]
 }
 
 def switchMode() {
@@ -307,17 +335,15 @@ def switchFanMode() {
 	def returnCommand
 
 	switch (currentFanMode) {
-		case "fanAuto":
-			returnCommand = switchToFanMode("fanOn")
+		case "on":
+			returnCommand = switchToFanMode("auto")
 			break
-		case "fanOn":
-			returnCommand = switchToFanMode("fanCirculate")
-			break
-		case "fanCirculate":
-			returnCommand = switchToFanMode("fanAuto")
+		case "auto":
+			returnCommand = switchToFanMode("on")
 			break
+
 	}
-	if(!currentFanMode) { returnCommand = switchToFanMode("fanOn") }
+	if(!currentFanMode) { returnCommand = switchToFanMode("auto") }
 	returnCommand
 }
 
@@ -326,25 +352,20 @@ def switchToFanMode(nextMode) {
 	log.debug "switching to fan mode: $nextMode"
 	def returnCommand
 
-	if(nextMode == "fanAuto") {
-		if(!fanModes.contains("fanAuto")) {
+	if(nextMode == "auto") {
+		if(!fanModes.contains("auto")) {
 			returnCommand = fanAuto()
 		} else {
-			returnCommand = switchToFanMode("fanOn")
+			returnCommand = switchToFanMode("on")
 		}
-	} else if(nextMode == "fanOn") {
-		if(!fanModes.contains("fanOn")) {
+	} else if(nextMode == "on") {
+		if(!fanModes.contains("on")) {
 			returnCommand = fanOn()
 		} else {
-			returnCommand = switchToFanMode("fanCirculate")
-		}
-	} else if(nextMode == "fanCirculate") {
-		if(!fanModes.contains("fanCirculate")) {
-			returnCommand = fanCirculate()
-		} else {
-			returnCommand = switchToFanMode("fanAuto")
+			returnCommand = switchToFanMode("auto")
 		}
 	}
+
 	returnCommand
 }
 
@@ -354,13 +375,10 @@ def getDataByName(String name) {
 
 def setThermostatMode(String value) {
 	log.debug "setThermostatMode({$value})"
-
 }
 
 def setThermostatFanMode(String value) {
-
 	log.debug "setThermostatFanMode({$value})"
-
 }
 
 def generateModeEvent(mode) {
@@ -447,26 +465,44 @@ def auto() {
 
 def fanOn() {
 	log.debug "fanOn"
-//    parent.setFanMode (this,"on")
+	String fanMode = "on"
+	def heatingSetpoint = device.currentValue("heatingSetpoint")
+	def coolingSetpoint = device.currentValue("coolingSetpoint")
+	def deviceId = device.deviceNetworkId.split(/\./).last()
 
+	def sendHoldType = holdType ? (holdType=="Temporary")? "nextTransition" : (holdType=="Permanent")? "indefinite" : "indefinite" : "indefinite"
+
+	def coolingValue = location.temperatureScale == "C"? convertCtoF(coolingSetpoint) : coolingSetpoint
+	def heatingValue = location.temperatureScale == "C"? convertCtoF(heatingSetpoint) : heatingSetpoint
+
+	if (parent.setFanMode(this, heatingValue, coolingValue, deviceId, sendHoldType, fanMode)) {
+		generateFanModeEvent(fanMode)
+	} else {
+		log.debug "Error setting new mode."
+		def currentFanMode = device.currentState("thermostatFanMode")?.value
+		generateModeEvent(currentFanMode) // reset the tile back
+	}
 }
 
 def fanAuto() {
 	log.debug "fanAuto"
-//    parent.setFanMode (this,"auto")
+	String fanMode = "auto"
+	def heatingSetpoint = device.currentValue("heatingSetpoint")
+	def coolingSetpoint = device.currentValue("coolingSetpoint")
+	def deviceId = device.deviceNetworkId.split(/\./).last()
 
-}
+	def sendHoldType = holdType ? (holdType=="Temporary")? "nextTransition" : (holdType=="Permanent")? "indefinite" : "indefinite" : "indefinite"
 
-def fanCirculate() {
-	log.debug "fanCirculate"
-//    parent.setFanMode (this,"circulate")
-
-}
-
-def fanOff() {
-	log.debug "fanOff"
-//    parent.setFanMode (this,"off")
+	def coolingValue = location.temperatureScale == "C"? convertCtoF(coolingSetpoint) : coolingSetpoint
+	def heatingValue = location.temperatureScale == "C"? convertCtoF(heatingSetpoint) : heatingSetpoint
 
+	if (parent.setFanMode(this, heatingValue, coolingValue, deviceId, sendHoldType, fanMode)) {
+		generateFanModeEvent(fanMode)
+	} else {
+		log.debug "Error setting new mode."
+		def currentFanMode = device.currentState("thermostatFanMode")?.value
+		generateModeEvent(currentFanMode) // reset the tile back
+	}
 }
 
 def generateSetpointEvent() {
@@ -476,20 +512,42 @@ def generateSetpointEvent() {
 	def mode = device.currentValue("thermostatMode")
 	log.debug "Current Mode = ${mode}"
 
-	def heatingSetpoint = device.currentValue("heatingSetpoint").toInteger()
+	def heatingSetpoint = device.currentValue("heatingSetpoint")
 	log.debug "Heating Setpoint = ${heatingSetpoint}"
 
-	def coolingSetpoint = device.currentValue("coolingSetpoint").toInteger()
+	def coolingSetpoint = device.currentValue("coolingSetpoint")
 	log.debug "Cooling Setpoint = ${coolingSetpoint}"
 
+	def maxHeatingSetpoint = device.currentValue("maxHeatingSetpoint")
+	def maxCoolingSetpoint = device.currentValue("maxCoolingSetpoint")
+	def minHeatingSetpoint = device.currentValue("minHeatingSetpoint")
+	def minCoolingSetpoint = device.currentValue("minCoolingSetpoint")
+
+	if(location.temperatureScale == "C")
+	{
+		maxHeatingSetpoint = roundC(maxHeatingSetpoint)
+		maxCoolingSetpoint = roundC(maxCoolingSetpoint)
+		minHeatingSetpoint = roundC(minHeatingSetpoint)
+		minCoolingSetpoint = roundC(minCoolingSetpoint)
+		heatingSetpoint = roundC(heatingSetpoint)
+		coolingSetpoint = roundC(coolingSetpoint)
+	}
+
+
+	sendEvent("name":"maxHeatingSetpoint", "value":maxHeatingSetpoint, "unit":location.temperatureScale)
+	sendEvent("name":"maxCoolingSetpoint", "value":maxCoolingSetpoint, "unit":location.temperatureScale)
+	sendEvent("name":"minHeatingSetpoint", "value":minHeatingSetpoint, "unit":location.temperatureScale)
+	sendEvent("name":"minCoolingSetpoint", "value":minCoolingSetpoint, "unit":location.temperatureScale)
+
+
 	if (mode == "heat") {
 
-		sendEvent("name":"thermostatSetpoint", "value":heatingSetpoint.toString())
+		sendEvent("name":"thermostatSetpoint", "value":heatingSetpoint )
 
 	}
 	else if (mode == "cool") {
 
-		sendEvent("name":"thermostatSetpoint", "value":coolingSetpoint.toString())
+		sendEvent("name":"thermostatSetpoint", "value":coolingSetpoint)
 
 	} else if (mode == "auto") {
 
@@ -499,9 +557,9 @@ def generateSetpointEvent() {
 
 		sendEvent("name":"thermostatSetpoint", "value":"Off")
 
-	} else if (mode == "emergencyHeat") {
+	} else if (mode == "auxHeatOnly") {
 
-		sendEvent("name":"thermostatSetpoint", "value":heatingSetpoint.toString())
+		sendEvent("name":"thermostatSetpoint", "value":heatingSetpoint)
 
 	}
 
@@ -510,26 +568,30 @@ def generateSetpointEvent() {
 void raiseSetpoint() {
 	def mode = device.currentValue("thermostatMode")
 	def targetvalue
+	def maxHeatingSetpoint = device.currentValue("maxHeatingSetpoint")
+	def maxCoolingSetpoint = device.currentValue("maxCoolingSetpoint")
+
 
 	if (mode == "off" || mode == "auto") {
 		log.warn "this mode: $mode does not allow raiseSetpoint"
 	} else {
-		def heatingSetpoint = device.currentValue("heatingSetpoint").toInteger()
-		def coolingSetpoint = device.currentValue("coolingSetpoint").toInteger()
-		def thermostatSetpoint = device.currentValue("thermostatSetpoint").toInteger()
+		def heatingSetpoint = device.currentValue("heatingSetpoint")
+		def coolingSetpoint = device.currentValue("coolingSetpoint")
+		def thermostatSetpoint = device.currentValue("thermostatSetpoint")
 		log.debug "raiseSetpoint() mode = ${mode}, heatingSetpoint: ${heatingSetpoint}, coolingSetpoint:${coolingSetpoint}, thermostatSetpoint:${thermostatSetpoint}"
 
 		if (device.latestState('thermostatSetpoint')) {
-			targetvalue = device.latestState('thermostatSetpoint').value as Integer
+			targetvalue = device.latestState('thermostatSetpoint').value
+			targetvalue = location.temperatureScale == "F"? targetvalue.toInteger() : targetvalue.toDouble()
 		} else {
 			targetvalue = 0
 		}
-		targetvalue = targetvalue + 1
+		targetvalue = location.temperatureScale == "F"? targetvalue + 1 : targetvalue + 0.5
 
-		if (mode == "heat" && targetvalue > 79) {
-			targetvalue = 79
-		} else if (mode == "cool" && targetvalue > 92) {
-			targetvalue = 92
+		if ((mode == "heat" || mode == "auxHeatOnly") && targetvalue > maxHeatingSetpoint) {
+			targetvalue = maxHeatingSetpoint
+		} else if (mode == "cool" && targetvalue > maxCoolingSetpoint) {
+			targetvalue = maxCoolingSetpoint
 		}
 
 		sendEvent("name":"thermostatSetpoint", "value":targetvalue, displayed: false)
@@ -543,25 +605,29 @@ void raiseSetpoint() {
 void lowerSetpoint() {
 	def mode = device.currentValue("thermostatMode")
 	def targetvalue
+	def minHeatingSetpoint = device.currentValue("minHeatingSetpoint")
+	def minCoolingSetpoint = device.currentValue("minCoolingSetpoint")
+
 
 	if (mode == "off" || mode == "auto") {
 		log.warn "this mode: $mode does not allow lowerSetpoint"
 	} else {
-		def heatingSetpoint = device.currentValue("heatingSetpoint").toInteger()
-		def coolingSetpoint = device.currentValue("coolingSetpoint").toInteger()
-		def thermostatSetpoint = device.currentValue("thermostatSetpoint").toInteger()
+		def heatingSetpoint = device.currentValue("heatingSetpoint")
+		def coolingSetpoint = device.currentValue("coolingSetpoint")
+		def thermostatSetpoint = device.currentValue("thermostatSetpoint")
 		log.debug "lowerSetpoint() mode = ${mode}, heatingSetpoint: ${heatingSetpoint}, coolingSetpoint:${coolingSetpoint}, thermostatSetpoint:${thermostatSetpoint}"
 		if (device.latestState('thermostatSetpoint')) {
-			targetvalue = device.latestState('thermostatSetpoint').value as Integer
+			targetvalue = device.latestState('thermostatSetpoint').value
+			targetvalue = location.temperatureScale == "F"? targetvalue.toInteger() : targetvalue.toDouble()
 		} else {
 			targetvalue = 0
 		}
-		targetvalue = targetvalue - 1
+		targetvalue = location.temperatureScale == "F"? targetvalue - 1 : targetvalue - 0.5
 
-		if (mode == "heat" && targetvalue.toInteger() < 45) {
-			targetvalue = 45
-		} else if (mode == "cool" && targetvalue.toInteger() < 65) {
-			targetvalue = 65
+		if ((mode == "heat" || mode == "auxHeatOnly") && targetvalue < minHeatingSetpoint) {
+			targetvalue = minHeatingSetpoint
+		} else if (mode == "cool" && targetvalue < minCoolingSetpoint) {
+			targetvalue = minCoolingSetpoint
 		}
 
 		sendEvent("name":"thermostatSetpoint", "value":targetvalue, displayed: false)
@@ -575,15 +641,15 @@ void lowerSetpoint() {
 void alterSetpoint(temp) {
 
 	def mode = device.currentValue("thermostatMode")
-	def heatingSetpoint = device.currentValue("heatingSetpoint").toInteger()
-	def coolingSetpoint = device.currentValue("coolingSetpoint").toInteger()
+	def heatingSetpoint = device.currentValue("heatingSetpoint")
+	def coolingSetpoint = device.currentValue("coolingSetpoint")
 	def deviceId = device.deviceNetworkId.split(/\./).last()
 
 	def targetHeatingSetpoint
 	def targetCoolingSetpoint
 
 	//step1: check thermostatMode, enforce limits before sending request to cloud
-	if (mode == "heat"){
+	if (mode == "heat" || mode == "auxHeatOnly"){
 		if (temp.value > coolingSetpoint){
 			targetHeatingSetpoint = temp.value
 			targetCoolingSetpoint = temp.value
@@ -602,19 +668,22 @@ void alterSetpoint(temp) {
 		}
 	}
 
-	log.debug "alterSetpoint >> in mode ${mode} trying to change heatingSetpoint to ${targetHeatingSetpoint} " +
-			"coolingSetpoint to ${targetCoolingSetpoint} with holdType : ${holdType}"
+	log.debug "alterSetpoint >> in mode ${mode} trying to change heatingSetpoint to $targetHeatingSetpoint " +
+			"coolingSetpoint to $targetCoolingSetpoint with holdType : ${holdType}"
 
 	def sendHoldType = holdType ? (holdType=="Temporary")? "nextTransition" : (holdType=="Permanent")? "indefinite" : "indefinite" : "indefinite"
-	//step2: call parent.setHold to send http request to 3rd party cloud
-	if (parent.setHold(this, targetHeatingSetpoint, targetCoolingSetpoint, deviceId, sendHoldType)) {
-		sendEvent("name": "thermostatSetpoint", "value": temp.value.toString(), displayed: false)
+
+	def coolingValue = location.temperatureScale == "C"? convertCtoF(targetCoolingSetpoint) : targetCoolingSetpoint
+	def heatingValue = location.temperatureScale == "C"? convertCtoF(targetHeatingSetpoint) : targetHeatingSetpoint
+
+	if (parent.setHold(this, heatingValue, coolingValue, deviceId, sendHoldType)) {
+		sendEvent("name": "thermostatSetpoint", "value": temp.value, displayed: false)
 		sendEvent("name": "heatingSetpoint", "value": targetHeatingSetpoint)
 		sendEvent("name": "coolingSetpoint", "value": targetCoolingSetpoint)
 		log.debug "alterSetpoint in mode $mode succeed change setpoint to= ${temp.value}"
 	} else {
 		log.error "Error alterSetpoint()"
-		if (mode == "heat"){
+		if (mode == "heat" || mode == "auxHeatOnly"){
 			sendEvent("name": "thermostatSetpoint", "value": heatingSetpoint.toString(), displayed: false)
 		} else if (mode == "cool") {
 			sendEvent("name": "thermostatSetpoint", "value": coolingSetpoint.toString(), displayed: false)
@@ -626,9 +695,9 @@ void alterSetpoint(temp) {
 def generateStatusEvent() {
 
 	def mode = device.currentValue("thermostatMode")
-	def heatingSetpoint = device.currentValue("heatingSetpoint").toInteger()
-	def coolingSetpoint = device.currentValue("coolingSetpoint").toInteger()
-	def temperature = device.currentValue("temperature").toInteger()
+	def heatingSetpoint = device.currentValue("heatingSetpoint")
+	def coolingSetpoint = device.currentValue("coolingSetpoint")
+	def temperature = device.currentValue("temperature")
 
 	def statusText
 
@@ -643,14 +712,14 @@ def generateStatusEvent() {
 		if (temperature >= heatingSetpoint)
 			statusText = "Right Now: Idle"
 		else
-			statusText = "Heating to ${heatingSetpoint}° F"
+			statusText = "Heating to ${heatingSetpoint} ${location.temperatureScale}"
 
 	} else if (mode == "cool") {
 
 		if (temperature <= coolingSetpoint)
 			statusText = "Right Now: Idle"
 		else
-			statusText = "Cooling to ${coolingSetpoint}° F"
+			statusText = "Cooling to ${coolingSetpoint} ${location.temperatureScale}"
 
 	} else if (mode == "auto") {
 
@@ -660,7 +729,7 @@ def generateStatusEvent() {
 
 		statusText = "Right Now: Off"
 
-	} else if (mode == "emergencyHeat") {
+	} else if (mode == "auxHeatOnly") {
 
 		statusText = "Emergency Heat"
 
@@ -673,7 +742,18 @@ def generateStatusEvent() {
 	sendEvent("name":"thermostatStatus", "value":statusText, "description":statusText, displayed: true)
 }
 
-//generate custom mobile activity feeds event
 def generateActivityFeedsEvent(notificationMessage) {
 	sendEvent(name: "notificationMessage", value: "$device.displayName $notificationMessage", descriptionText: "$device.displayName $notificationMessage", displayed: true)
 }
+
+def roundC (tempC) {
+	return (Math.round(tempC.toDouble() * 2))/2
+}
+
+def convertFtoC (tempF) {
+	return String.format("%.1f", (Math.round(((tempF - 32)*(5/9)) * 2))/2)
+}
+
+def convertCtoF (tempC) {
+	return (Math.round(tempC * (9/5)) + 32).toInteger()
+}

devicetypes/smartthings/homeseer-multisensor.src/homeseer-multisensor.groovy

@@ -80,19 +80,12 @@ def parse(String description) {
 	if (cmd) {
 		result = zwaveEvent(cmd)
 	}
-	// log.debug "Parsed ${description.inspect()} to ${result.inspect()}"
+	log.debug "Parsed ${description.inspect()} to ${result.inspect()}"
 	return result
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.multiinstancev1.MultiInstanceCmdEncap cmd) {
-	def encapsulated = null
-	if (cmd.respondsTo("encapsulatedCommand")) {
-		encapsulated = cmd.encapsulatedCommand()
-	} else {
-		def hex1 = { n -> String.format("%02X", n) }
-		def sorry = "command: ${hex1(cmd.commandClass)}${hex1(cmd.command)}, payload: " + cmd.parameter.collect{ hex1(it) }.join(" ")
-		encapsulated = zwave.parse(sorry, [0x31: 1, 0x84: 2, 0x60: 1, 0x85: 1, 0x70: 1])
-	}
+	def encapsulated = cmd.encapsulatedCommand([0x31: 1, 0x84: 2, 0x60: 1, 0x85: 1, 0x70: 1])
 	return encapsulated ? zwaveEvent(encapsulated) : null
 }
 

devicetypes/smartthings/smartsense-moisture.src/smartsense-moisture.groovy

@@ -16,6 +16,7 @@ metadata {
 		capability "Water Sensor"
 		capability "Sensor"
 		capability "Battery"
+        capability "Temperature Measurement"
 
 		fingerprint deviceId: "0x2001", inClusters: "0x30,0x9C,0x9D,0x85,0x80,0x72,0x31,0x84,0x86"
 		fingerprint deviceId: "0x2101", inClusters: "0x71,0x70,0x85,0x80,0x72,0x31,0x84,0x86"
@@ -39,17 +40,29 @@ metadata {
 				attributeState "wet", label: "Wet", icon:"st.alarm.water.wet", backgroundColor:"#53a7c0"
 			}
 		}
-		standardTile("temperature", "device.temperature", width: 2, height: 2) {
+		standardTile("temperatureState", "device.temperature", width: 2, height: 2) {
 			state "normal", icon:"st.alarm.temperature.normal", backgroundColor:"#ffffff"
 			state "freezing", icon:"st.alarm.temperature.freeze", backgroundColor:"#53a7c0"
 			state "overheated", icon:"st.alarm.temperature.overheat", backgroundColor:"#F80000"
 		}
+		valueTile("temperature", "device.temperature", width: 2, height: 2) {
+            state("temperature", label:'${currentValue}°',
+                backgroundColors:[
+                    [value: 31, color: "#153591"],
+                    [value: 44, color: "#1e9cbb"],
+                    [value: 59, color: "#90d2a7"],
+                    [value: 74, color: "#44b621"],
+                    [value: 84, color: "#f1d801"],
+                    [value: 95, color: "#d04e00"],
+                    [value: 96, color: "#bc2323"]
+                ]
+            )
+        }
 		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
 			state "battery", label:'${currentValue}% battery', unit:""
 		}
-
-		main (["water", "temperature"])
-		details(["water", "temperature", "battery"])
+		main (["water", "temperatureState"])
+		details(["water", "temperatureState", "temperature", "battery"])
 	}
 }
 
@@ -115,7 +128,7 @@ def zwaveEvent(physicalgraph.zwave.commands.alarmv2.AlarmReport cmd)
 		map.descriptionText = "${device.displayName} is ${map.value}"
 	}
 	if(cmd.zwaveAlarmType ==  physicalgraph.zwave.commands.alarmv2.AlarmReport.ZWAVE_ALARM_TYPE_HEAT) {
-		map.name = "temperature"
+		map.name = "temperatureState"
 		if(cmd.zwaveAlarmEvent == 1) { map.value = "overheated"}
 		if(cmd.zwaveAlarmEvent == 2) { map.value = "overheated"}
 		if(cmd.zwaveAlarmEvent == 3) { map.value = "changing temperature rapidly"}
@@ -129,17 +142,30 @@ def zwaveEvent(physicalgraph.zwave.commands.alarmv2.AlarmReport cmd)
 	map
 }
 
-def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd)
+def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv5.SensorMultilevelReport cmd)
 {
 	def map = [:]
-	map.name = "water"
-	map.value = cmd.value ? "wet" : "dry"
-	map.descriptionText = "${device.displayName} is ${map.value}"
+	if(cmd.sensorType == 1) {
+		map.name = "temperature"
+        if(cmd.scale == 0) {
+        	map.value = getTemperature(cmd.scaledSensorValue)
+        } else {
+	        map.value = cmd.scaledSensorValue
+        }
+        map.unit = location.temperatureScale
+	}
 	map
 }
 
+def getTemperature(value) {
+	if(location.temperatureScale == "C"){
+		return value
+    } else {
+        return Math.round(celsiusToFahrenheit(value))
+    }
+}
+
 def zwaveEvent(physicalgraph.zwave.Command cmd)
 {
 	log.debug "COMMAND CLASS: $cmd"
-}
-
+}

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -29,6 +29,7 @@ metadata {
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3305"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3325"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3326"
+		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3326-L", deviceJoinName: "Iris Motion Sensor"
 		fingerprint inClusters: "0000,0001,0003,000F,0020,0402,0500", outClusters: "0019", manufacturer: "SmartThings", model: "motionv4", deviceJoinName: "Motion Sensor"
 	}
 

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -487,11 +487,6 @@ def enrollResponse() {
 }
 
 private Map parseAxis(String description) {
-	def hexToSignedInt = { hexVal ->
-		def unsignedVal = hexToInt(hexVal)
-		unsignedVal > 32767 ? unsignedVal - 65536 : unsignedVal
-	}
-
 	def z = hexToSignedInt(description[0..3])
 	def y = hexToSignedInt(description[10..13])
 	def x = hexToSignedInt(description[20..23])
@@ -518,6 +513,11 @@ private Map parseAxis(String description) {
 	getXyzResult(xyzResults, description)
 }
 
+private hexToSignedInt(hexVal) {
+	def unsignedVal = hexToInt(hexVal)
+	unsignedVal > 32767 ? unsignedVal - 65536 : unsignedVal
+}
+
 def garageEvent(zValue) {
 	def absValue = zValue.abs()
 	def contactValue = null

devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy

@@ -16,17 +16,18 @@
  
 metadata {
 	definition (name: "SmartSense Open/Closed Sensor", namespace: "smartthings", author: "SmartThings") {
-    	capability "Battery"
+		capability "Battery"
 		capability "Configuration"
-        capability "Contact Sensor"
+		capability "Contact Sensor"
 		capability "Refresh"
 		capability "Temperature Measurement"
         
-        command "enrollResponse"
+		command "enrollResponse"
  
  
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3300-S"
-        fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3300"
+		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3300"
+		fingerprint inClusters: "0000,0001,0003,0020,0402,0500,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3320-L", deviceJoinName: "Iris Contact Sensor"
 	}
  
 	simulator {

devicetypes/smartthings/zigbee-switch-power.src/zigbee-switch-power.groovy

@@ -25,6 +25,7 @@ metadata {
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0702"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0702, 0B05", outClusters: "0003, 000A, 0019", manufacturer: "Jasco Products", model: "45853", deviceJoinName: "GE ZigBee Plug-In Switch"
         fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 0702, 0B05", outClusters: "000A, 0019", manufacturer: "Jasco Products", model: "45856", deviceJoinName: "GE ZigBee In-Wall Switch"
+        fingerprint profileId: "0104", inClusters: "0000, 0003, 0004, 0005, 0006, 000F, 0B04", outClusters: "0019", manufacturer: "SmartThings", model: "outletv4", deviceJoinName: "Outlet"
     }
 
     tiles(scale: 2) {

devicetypes/smartthings/zwave-lock.src/zwave-lock.groovy

@@ -275,6 +275,7 @@ def zwaveEvent(physicalgraph.zwave.commands.alarmv2.AlarmReport cmd) {
 		case 32:
 			map = [ name: "codeChanged", value: "all", descriptionText: "$device.displayName: all user codes deleted", isStateChange: true ]
 			allCodesDeleted()
+			break
 		case 33:
 			map = [ name: "codeReport", value: cmd.alarmLevel, data: [ code: "" ], isStateChange: true ]
 			map.descriptionText = "$device.displayName code $cmd.alarmLevel was deleted"
@@ -341,14 +342,14 @@ def zwaveEvent(UserCodeReport cmd) {
 			map = [ name: "codeReport", value: cmd.userIdentifier, data: [ code: code ] ]
 			map.descriptionText = "$device.displayName code $cmd.userIdentifier is set"
 			map.displayed = (cmd.userIdentifier != state.requestCode && cmd.userIdentifier != state.pollCode)
-			map.isStateChange = (code != decrypt(state[name]))
+			map.isStateChange = true
 		}
 		result << createEvent(map)
 	} else {
 		map = [ name: "codeReport", value: cmd.userIdentifier, data: [ code: "" ] ]
 		if (state.blankcodes && state["reset$name"]) {  // we deleted this code so we can tell that our new code gets set
 			map.descriptionText = "$device.displayName code $cmd.userIdentifier was reset"
-			map.displayed = map.isStateChange = false
+			map.displayed = map.isStateChange = true
 			result << createEvent(map)
 			state["set$name"] = state["reset$name"]
 			result << response(setCode(cmd.userIdentifier, state["reset$name"]))
@@ -360,7 +361,7 @@ def zwaveEvent(UserCodeReport cmd) {
 				map.descriptionText = "$device.displayName code $cmd.userIdentifier is not set"
 			}
 			map.displayed = (cmd.userIdentifier != state.requestCode && cmd.userIdentifier != state.pollCode)
-			map.isStateChange = state[name] as Boolean
+			map.isStateChange = true
 			result << createEvent(map)
 		}
 		code = ""

smartapps/smartthings/ecobee-connect.src/ecobee-connect.groovy

@@ -28,7 +28,7 @@ definition(
 		category: "SmartThings Labs",
 		iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/ecobee.png",
 		iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/ecobee@2x.png",
-        singleInstance: true
+		singleInstance: true
 ) {
 	appSetting "clientId"
 }
@@ -61,7 +61,7 @@ def authPage() {
 		description = "Click to enter Ecobee Credentials"
 	}
 
-	def redirectUrl = buildRedirectUrl //"${serverUrl}/oauth/initialize?appId=${app.id}&access_token=${atomicState.accessToken}"
+	def redirectUrl = buildRedirectUrl
 	log.debug "RedirectUrl = ${redirectUrl}"
 	// get rid of next button until the user is actually auth'd
 	if (!oauthTokenProvided) {
@@ -103,7 +103,7 @@ def oauthInitUrl() {
 			scope: "smartRead,smartWrite",
 			client_id: smartThingsClientId,
 			state: atomicState.oauthInitState,
-			redirect_uri: callbackUrl //"https://graph.api.smartthings.com/oauth/callback"
+			redirect_uri: callbackUrl
 	]
 
 	redirect(location: "${apiEndpoint}/authorize?${toQueryString(oauthParams)}")
@@ -115,14 +115,13 @@ def callback() {
 	def code = params.code
 	def oauthState = params.state
 
-	//verify oauthState == atomicState.oauthInitState, so the callback corresponds to the authentication request
 	if (oauthState == atomicState.oauthInitState){
 
 		def tokenParams = [
 				grant_type: "authorization_code",
 				code      : code,
 				client_id : smartThingsClientId,
-				redirect_uri: callbackUrl //"https://graph.api.smartthings.com/oauth/callback"
+				redirect_uri: callbackUrl
 		]
 
 		def tokenUrl = "https://www.ecobee.com/home/token?${toQueryString(tokenParams)}"
@@ -247,31 +246,26 @@ def getEcobeeThermostats() {
 	]
 
 	def stats = [:]
-    try {
-        httpGet(deviceListParams) { resp ->
+	try {
+		httpGet(deviceListParams) { resp ->
 
-            if (resp.status == 200) {
-                resp.data.thermostatList.each { stat ->
-                    atomicState.remoteSensors = stat.remoteSensors
-                    def dni = [app.id, stat.identifier].join('.')
-                    stats[dni] = getThermostatDisplayName(stat)
-                }
-            } else {
-                log.debug "http status: ${resp.status}"
-                //refresh the auth token
-                if (resp.status == 500 && resp.data.status.code == 14) {
-                    log.debug "Storing the failed action to try later"
-                    atomicState.action = "getEcobeeThermostats"
-                    log.debug "Refreshing your auth_token!"
-                    refreshAuthToken()
-                } else {
-                    log.error "Authentication error, invalid authentication method, lack of credentials, etc."
-                }
-            }
+			if (resp.status == 200) {
+				resp.data.thermostatList.each { stat ->
+					atomicState.remoteSensors = stat.remoteSensors
+					def dni = [app.id, stat.identifier].join('.')
+					stats[dni] = getThermostatDisplayName(stat)
+				}
+			} else {
+				log.debug "http status: ${resp.status}"
+			}
+		}
+	} catch (groovyx.net.http.HttpResponseException e) {
+        log.trace "Exception polling children: " + e.response.data.status
+        if (e.response.data.status.code == 14) {
+            atomicState.action = "getEcobeeThermostats"
+            log.debug "Refreshing your auth_token!"
+            refreshAuthToken()
         }
-    } catch(Exception e) {
-        log.debug "___exception getEcobeeThermostats(): " + e
-        refreshAuthToken()
     }
 	atomicState.thermostats = stats
 	return stats
@@ -317,7 +311,7 @@ def initialize() {
 	def devices = thermostats.collect { dni ->
 		def d = getChildDevice(dni)
 		if(!d) {
-			d = addChildDevice(app.namespace, getChildName(), dni, null, ["label":"Ecobee Thermostat:${atomicState.thermostats[dni]}"])
+			d = addChildDevice(app.namespace, getChildName(), dni, null, ["label":"${atomicState.thermostats[dni]}" ?: "Ecobee Thermostat"])
 			log.debug "created ${d.displayName} with id $dni"
 		} else {
 			log.debug "found ${d.displayName} with id $dni already exists"
@@ -328,7 +322,7 @@ def initialize() {
 	def sensors = ecobeesensors.collect { dni ->
 		def d = getChildDevice(dni)
 		if(!d) {
-			d = addChildDevice(app.namespace, getSensorChildName(), dni, null, ["label":"Ecobee Sensor:${atomicState.sensors[dni]}"])
+			d = addChildDevice(app.namespace, getSensorChildName(), dni, null, ["label":"${atomicState.sensors[dni]}" ?:"Ecobee Sensor"])
 			log.debug "created ${d.displayName} with id $dni"
 		} else {
 			log.debug "found ${d.displayName} with id $dni already exists"
@@ -354,21 +348,17 @@ def initialize() {
 
 	atomicState.thermostatData = [:] //reset Map to store thermostat data
 
-    //send activity feeds to tell that device is connected
-    def notificationMessage = "is connected to SmartThings"
-    sendActivityFeeds(notificationMessage)
-    state.timeSendPush = null
+	//send activity feeds to tell that device is connected
+	def notificationMessage = "is connected to SmartThings"
+	sendActivityFeeds(notificationMessage)
+	atomicState.timeSendPush = null
+	atomicState.reAttempt = 0
 
 	pollHandler() //first time polling data data from thermostat
 
 	//automatically update devices status every 5 mins
 	runEvery5Minutes("poll")
 
-    //since access_token expires every 2 hours
-    runEvery1Hour("refreshAuthToken")
-
-	atomicState.reAttempt = 0
-
 }
 
 def pollHandler() {
@@ -389,18 +379,10 @@ def pollHandler() {
 def pollChildren(child = null) {
 	def thermostatIdsString = getChildDeviceIdsString()
 	log.debug "polling children: $thermostatIdsString"
+	def data = ""
 
 	def jsonRequestBody = '{"selection":{"selectionType":"thermostats","selectionMatch":"' + thermostatIdsString + '","includeExtendedRuntime":"true","includeSettings":"true","includeRuntime":"true","includeSensors":true}}'
 	def result = false
-	// // TODO: test this:
-	//
-	// def jsonRequestBody = toJson([
-	//	selection:[
-	//		selectionType: "thermostats",
-	//		   selectionMatch: getChildDeviceIdsString(),
-	//		   includeRuntime: true
-	//	   ]
-	// ])
 
 	def pollParams = [
 			uri: apiEndpoint,
@@ -411,11 +393,6 @@ def pollChildren(child = null) {
 
 	try{
 		httpGet(pollParams) { resp ->
-
-//            if (resp.data) {
-//                debugEventFromParent(child, "pollChildren(child) >> resp.status = ${resp.status}, resp.data = ${resp.data}")
-//            }
-
 			if(resp.status == 200) {
 				log.debug "poll results returned resp.data ${resp.data}"
 				atomicState.remoteSensors = resp.data.thermostatList.remoteSensors
@@ -426,45 +403,57 @@ def pollChildren(child = null) {
 
 					log.debug "updating dni $dni"
 
-					def data = [
+					data = [
 							coolMode: (stat.settings.coolStages > 0),
 							heatMode: (stat.settings.heatStages > 0),
+							deviceTemperatureUnit: stat.settings.useCelsius,
+							minHeatingSetpoint: (stat.settings.heatRangeLow / 10),
+							maxHeatingSetpoint: (stat.settings.heatRangeHigh / 10),
+							minCoolingSetpoint: (stat.settings.coolRangeLow / 10),
+							maxCoolingSetpoint: (stat.settings.coolRangeHigh / 10),
 							autoMode: stat.settings.autoHeatCoolFeatureEnabled,
 							auxHeatMode: (stat.settings.hasHeatPump) && (stat.settings.hasForcedAir || stat.settings.hasElectric || stat.settings.hasBoiler),
-							temperature: stat.runtime.actualTemperature / 10,
+							temperature: (stat.runtime.actualTemperature / 10),
 							heatingSetpoint: stat.runtime.desiredHeat / 10,
 							coolingSetpoint: stat.runtime.desiredCool / 10,
-							thermostatMode: stat.settings.hvacMode
+							thermostatMode: stat.settings.hvacMode,
+							humidity: stat.runtime.actualHumidity,
+							thermostatFanMode: stat.runtime.desiredFanMode
 					]
-					data["temperature"] = data["temperature"] ? data["temperature"].toDouble().toInteger() : data["temperature"]
-					data["heatingSetpoint"] = data["heatingSetpoint"] ? data["heatingSetpoint"].toDouble().toInteger() : data["heatingSetpoint"]
-					data["coolingSetpoint"] = data["coolingSetpoint"] ? data["coolingSetpoint"].toDouble().toInteger() : data["coolingSetpoint"]
-//                    debugEventFromParent(child, "Event Data = ${data}")
+
+					if (location.temperatureScale == "F")
+					{
+						data["temperature"] = data["temperature"] ? Math.round(data["temperature"].toDouble()) : data["temperature"]
+						data["heatingSetpoint"] = data["heatingSetpoint"] ? Math.round(data["heatingSetpoint"].toDouble()) : data["heatingSetpoint"]
+						data["coolingSetpoint"] = data["coolingSetpoint"] ? Math.round(data["coolingSetpoint"].toDouble()) : data["coolingSetpoint"]
+						data["minHeatingSetpoint"] = data["minHeatingSetpoint"] ? Math.round(data["minHeatingSetpoint"].toDouble()) : data["minHeatingSetpoint"]
+						data["maxHeatingSetpoint"] = data["maxHeatingSetpoint"] ? Math.round(data["maxHeatingSetpoint"].toDouble()) : data["maxHeatingSetpoint"]
+						data["minCoolingSetpoint"] = data["minCoolingSetpoint"] ? Math.round(data["minCoolingSetpoint"].toDouble()) : data["minCoolingSetpoint"]
+						data["maxCoolingSetpoint"] = data["maxCoolingSetpoint"] ? Math.round(data["maxCoolingSetpoint"].toDouble()) : data["maxCoolingSetpoint"]
+
+					}
+
+					if (data?.deviceTemperatureUnit == false && location.temperatureScale == "F") {
+						data["deviceTemperatureUnit"] = "F"
+
+					} else {
+						data["deviceTemperatureUnit"] = "C"
+					}
 
 					collector[dni] = [data:data]
 					return collector
 				}
 				result = true
 				log.debug "updated ${atomicState.thermostats?.size()} stats: ${atomicState.thermostats}"
-			} else {
-				log.error "polling children & got http status ${resp.status}"
-
-				//refresh the auth token
-				if (resp.status == 500 && resp.data.status.code == 14) {
-					log.debug "Storing the failed action to try later"
-					atomicState.action = "pollChildren";
-					log.debug "Refreshing your auth_token!"
-					refreshAuthToken()
-				}
-				else {
-					log.error "Authentication error, invalid authentication method, lack of credentials, etc."
-				}
 			}
 		}
-	} catch(Exception e) {
-		log.debug "___exception polling children: " + e
-//        debugEventFromParent(child, "___exception polling children: " + e)
-		refreshAuthToken()
+	} catch (groovyx.net.http.HttpResponseException e) {
+		log.trace "Exception polling children: " + e.response.data.status
+        if (e.response.data.status.code == 14) {
+            atomicState.action = "pollChildren"
+            log.debug "Refreshing your auth_token!"
+            refreshAuthToken()
+        }
 	}
 	return result
 }
@@ -476,18 +465,14 @@ def pollChild(child){
 		if (!child.device.deviceNetworkId.startsWith("ecobee_sensor")){
 			if(atomicState.thermostats[child.device.deviceNetworkId] != null) {
 				def tData = atomicState.thermostats[child.device.deviceNetworkId]
-//                debugEventFromParent(child, "pollChild(child)>> data for ${child.device.deviceNetworkId} : ${tData.data}") //TODO comment
 				log.info "pollChild(child)>> data for ${child.device.deviceNetworkId} : ${tData.data}"
 				child.generateEvent(tData.data) //parse received message from parent
-//            return tData.data
 			} else if(atomicState.thermostats[child.device.deviceNetworkId] == null) {
-//                debugEventFromParent(child, "ERROR: Device connection removed? no data for ${child.device.deviceNetworkId} after polling") //TODO comment
 				log.error "ERROR: Device connection removed? no data for ${child.device.deviceNetworkId}"
 				return null
 			}
 		}
 	} else {
-//        debugEventFromParent(child, "ERROR: pollChildren(child) for ${child.device.deviceNetworkId} after polling") //TODO comment
 		log.info "ERROR: pollChildren(child) for ${child.device.deviceNetworkId} after polling"
 		return null
 	}
@@ -513,9 +498,6 @@ def availableModes(child) {
 	{
 		log.error "ERROR: Device connection removed? no data for ${child.device.deviceNetworkId} after polling"
 
-		// TODO: flag device as in error state
-		// child.errorState = true
-
 		return null
 	}
 
@@ -542,8 +524,6 @@ def currentMode(child) {
 	if(!tData) {
 		log.error "ERROR: Device connection removed? no data for ${child.device.deviceNetworkId} after polling"
 
-		// TODO: flag device as in error state
-		// child.errorState = true
 
 		return null
 	}
@@ -561,8 +541,12 @@ def updateSensorData() {
 				def occupancy = ""
 				it.capability.each {
 					if (it.type == "temperature") {
-						temperature = it.value as Double
-						temperature = (temperature / 10).toInteger()
+						if (location.temperatureScale == "F") {
+							temperature = Math.round(it.value.toDouble() / 10)
+						} else {
+							temperature = convertFtoC(it.value.toDouble() / 10)
+						}
+
 					} else if (it.type == "occupancy") {
 						if(it.value == "true")
 							occupancy = "active"
@@ -575,7 +559,6 @@ def updateSensorData() {
 				if(d) {
 					d.sendEvent(name:"temperature", value: temperature)
 					d.sendEvent(name:"motion", value: occupancy)
-//                    debugEventFromParent(d, "temperature : ${temperature}, motion:${occupancy}")
 				}
 			}
 		}
@@ -595,68 +578,65 @@ def toQueryString(Map m) {
 }
 
 private refreshAuthToken() {
-    log.debug "refreshing auth token"
+	log.debug "refreshing auth token"
 
-    if(!atomicState.refreshToken) {
-        log.warn "Can not refresh OAuth token since there is no refreshToken stored"
-    } else {
+	if(!atomicState.refreshToken) {
+		log.warn "Can not refresh OAuth token since there is no refreshToken stored"
+	} else {
 
-        def refreshParams = [
-                method: 'POST',
-                uri   : apiEndpoint,
-                path  : "/token",
-                query : [grant_type: 'refresh_token', code: "${atomicState.refreshToken}", client_id: smartThingsClientId],
-        ]
+		def refreshParams = [
+				method: 'POST',
+				uri   : apiEndpoint,
+				path  : "/token",
+				query : [grant_type: 'refresh_token', code: "${atomicState.refreshToken}", client_id: smartThingsClientId],
+		]
 
-        log.debug refreshParams
+		log.debug refreshParams
 
-        def notificationMessage = "is disconnected from SmartThings, because the access credential changed or was lost. Please go to the Ecobee (Connect) SmartApp and re-enter your account login credentials."
-        //changed to httpPost
-        try {
-            def jsonMap
-            httpPost(refreshParams) { resp ->
+		def notificationMessage = "is disconnected from SmartThings, because the access credential changed or was lost. Please go to the Ecobee (Connect) SmartApp and re-enter your account login credentials."
+		//changed to httpPost
+		try {
+			def jsonMap
+			httpPost(refreshParams) { resp ->
 
-                if(resp.status == 200) {
-                    log.debug "Token refreshed...calling saved RestAction now!"
+				if(resp.status == 200) {
+					log.debug "Token refreshed...calling saved RestAction now!"
 
-                    debugEvent("Token refreshed ... calling saved RestAction now!")
+					debugEvent("Token refreshed ... calling saved RestAction now!")
 
-                    log.debug resp
+					log.debug resp
 
-                    jsonMap = resp.data
+					jsonMap = resp.data
 
-                    if(resp.data) {
+					if(resp.data) {
 
-                        log.debug resp.data
-                        debugEvent("Response = ${resp.data}")
+						log.debug resp.data
+						debugEvent("Response = ${resp.data}")
 
-                        atomicState.refreshToken = resp?.data?.refresh_token
-                        atomicState.authToken = resp?.data?.access_token
+						atomicState.refreshToken = resp?.data?.refresh_token
+						atomicState.authToken = resp?.data?.access_token
 
-                        debugEvent("Refresh Token = ${atomicState.refreshToken}")
-                        debugEvent("OAUTH Token = ${atomicState.authToken}")
+						debugEvent("Refresh Token = ${atomicState.refreshToken}")
+						debugEvent("OAUTH Token = ${atomicState.authToken}")
 
-                        if(atomicState.action && atomicState.action != "") {
-                            log.debug "Executing next action: ${atomicState.action}"
+						if(atomicState.action && atomicState.action != "") {
+							log.debug "Executing next action: ${atomicState.action}"
 
-                            "${atomicState.action}"()
+							"${atomicState.action}"()
 
-                            //remove saved action
-                            atomicState.action = ""
-                        }
+							atomicState.action = ""
+						}
 
-                    }
-                    atomicState.action = ""
-                } else {
-                    log.debug "refresh failed ${resp.status} : ${resp.status.code}"
-                }
-            }
-        } catch(Exception e) {
-            log.error "refreshAuthToken() >> Error: e.statusCode ${e.statusCode}"
+					}
+					atomicState.action = ""
+				}
+			}
+		} catch (groovyx.net.http.HttpResponseException e) {
+			log.error "refreshAuthToken() >> Error: e.statusCode ${e.statusCode}"
 			def reAttemptPeriod = 300 // in sec
-			if (e.statusCode != 401) { //this issue might comes from exceed 20sec app execution, connectivity issue etc.
+			if (e.statusCode != 401) { // this issue might comes from exceed 20sec app execution, connectivity issue etc.
 				runIn(reAttemptPeriod, "refreshAuthToken")
-			} else if (e.statusCode == 401) { //refresh token is expired
+			} else if (e.statusCode == 401) { // unauthorized
 				atomicState.reAttempt = atomicState.reAttempt + 1
 				log.warn "reAttempt refreshAuthToken to try = ${atomicState.reAttempt}"
 				if (atomicState.reAttempt <= 3) {
@@ -665,20 +645,16 @@ private refreshAuthToken() {
 					sendPushAndFeeds(notificationMessage)
 					atomicState.reAttempt = 0
 				}
-            }
-        }
-    }
+			}
+		}
+	}
 }
 
 def resumeProgram(child, deviceId) {
 
-//    def thermostatIdsString = getChildDeviceIdsString()
-//    log.debug "resumeProgram children: $thermostatIdsString"
 
 	def jsonRequestBody = '{"selection":{"selectionType":"thermostats","selectionMatch":"' + deviceId + '","includeRuntime":true},"functions": [{"type": "resumeProgram"}]}'
-	//, { "type": "sendMessage", "params": { "text": "Setpoint Updated" } }
 	def result = sendJson(jsonRequestBody)
-//    debugEventFromParent(child, "resumeProgram(child) with result ${result}")
 	return result
 }
 
@@ -686,28 +662,27 @@ def setHold(child, heating, cooling, deviceId, sendHoldType) {
 
 	int h = heating * 10
 	int c = cooling * 10
-
-//    log.debug "setpoints____________ - h: $heating - $h, c: $cooling - $c"
-//    def thermostatIdsString = getChildDeviceIdsString()
-
 	def jsonRequestBody = '{"selection":{"selectionType":"thermostats","selectionMatch":"' + deviceId + '","includeRuntime":true},"functions": [{ "type": "setHold", "params": { "coolHoldTemp": '+c+',"heatHoldTemp": '+h+', "holdType": '+sendHoldType+' } } ]}'
-//	def jsonRequestBody = '{"selection":{"selectionType":"thermostats","selectionMatch":"' + thermostatIdsString + '","includeRuntime":true},"functions": [{"type": "resumeProgram"}, { "type": "setHold", "params": { "coolHoldTemp": '+c+',"heatHoldTemp": '+h+', "holdType": "indefinite" } } ]}'
+
+	def result = sendJson(child, jsonRequestBody)
+	return result
+}
+
+def setFanMode(child, heating, cooling, deviceId, sendHoldType, fanMode) {
+
+	int h = heating * 10
+	int c = cooling * 10
+
+
+	def jsonRequestBody = '{"selection":{"selectionType":"thermostats","selectionMatch":"' + deviceId + '","includeRuntime":true},"functions": [{ "type": "setHold", "params": { "coolHoldTemp": '+c+',"heatHoldTemp": '+h+', "holdType": '+sendHoldType+', "fan": '+fanMode+' } } ]}'
 	def result = sendJson(child, jsonRequestBody)
-//    debugEventFromParent(child, "setHold: heating: ${h}, cooling: ${c} with result ${result}")
 	return result
 }
 
 def setMode(child, mode, deviceId) {
-//    def thermostatIdsString = getChildDeviceIdsString()
-//    log.debug "setCoolingSetpoint children: $thermostatIdsString"
-
 	def jsonRequestBody = '{"selection":{"selectionType":"thermostats","selectionMatch":"' + deviceId + '","includeRuntime":true},"thermostat": {"settings":{"hvacMode":"'+"${mode}"+'"}}}'
 
-//    log.debug "Mode Request Body = ${jsonRequestBody}"
-//    debugEvent ("Mode Request Body = ${jsonRequestBody}")
-
 	def result = sendJson(jsonRequestBody)
-//    debugEventFromParent(child, "setMode to ${mode} with result ${result}")
 	return result
 }
 
@@ -724,8 +699,6 @@ def sendJson(child = null, String jsonBody) {
 	try{
 		httpPost(cmdParams) { resp ->
 
-//            debugEventFromParent(child, "sendJson >> resp.status ${resp.status}, resp.data: ${resp.data}")
-
 			if(resp.status == 200) {
 
 				log.debug "updated ${resp.data}"
@@ -736,30 +709,21 @@ def sendJson(child = null, String jsonBody) {
 					log.debug "Error return code = ${resp.data.status.code}"
 					debugEvent("Error return code = ${resp.data.status.code}")
 				}
-			} else {
-				log.error "sent Json & got http status ${resp.status} - ${resp.status.code}"
-				debugEvent ("sent Json & got http status ${resp.status} - ${resp.status.code}")
-
-				//refresh the auth token
-				if (resp.status == 500 && resp.status.code == 14) {
-					//log.debug "Storing the failed action to try later"
-					log.debug "Refreshing your auth_token!"
-					debugEvent ("Refreshing OAUTH Token")
-					refreshAuthToken()
-					return false
-				} else {
-					debugEvent ("Authentication error, invalid authentication method, lack of credentials, etc.")
-					log.error "Authentication error, invalid authentication method, lack of credentials, etc."
-					return false
-				}
 			}
 		}
-	} catch(Exception e) {
-		log.debug "Exception Sending Json: " + e
-		debugEvent ("Exception Sending JSON: " + e)
-        refreshAuthToken()
-		return false
-	}
+	} catch (groovyx.net.http.HttpResponseException e) {
+        log.trace "Exception Sending Json: " + e.response.data.status
+        debugEvent ("sent Json & got http status ${e.statusCode} - ${e.response.data.status.code}")
+        if (e.response.data.status.code == 14) {
+            atomicState.action = "pollChildren"
+            log.debug "Refreshing your auth_token!"
+            refreshAuthToken()
+        }
+        else {
+            debugEvent("Authentication error, invalid authentication method, lack of credentials, etc.")
+            log.error "Authentication error, invalid authentication method, lack of credentials, etc."
+        }
+    }
 
 	if (returnStatus == 0)
 		return true
@@ -794,25 +758,37 @@ def debugEventFromParent(child, message) {
 
 //send both push notification and mobile activity feeds
 def sendPushAndFeeds(notificationMessage){
-    log.warn "sendPushAndFeeds >> notificationMessage: ${notificationMessage}"
-    log.warn "sendPushAndFeeds >> atomicState.timeSendPush: ${atomicState.timeSendPush}"
-    if (atomicState.timeSendPush){
-        if (now() - atomicState.timeSendPush > 86400000){ // notification is sent to remind user once a day
-            sendPush("Your Ecobee thermostat " + notificationMessage)
-            sendActivityFeeds(notificationMessage)
-            atomicState.timeSendPush = now()
-        }
-    } else {
-        sendPush("Your Ecobee thermostat " + notificationMessage)
-        sendActivityFeeds(notificationMessage)
-        atomicState.timeSendPush = now()
-    }
-    atomicState.authToken = null
+	log.warn "sendPushAndFeeds >> notificationMessage: ${notificationMessage}"
+	log.warn "sendPushAndFeeds >> atomicState.timeSendPush: ${atomicState.timeSendPush}"
+	if (atomicState.timeSendPush){
+		if (now() - atomicState.timeSendPush > 86400000){ // notification is sent to remind user once a day
+			sendPush("Your Ecobee thermostat " + notificationMessage)
+			sendActivityFeeds(notificationMessage)
+			atomicState.timeSendPush = now()
+		}
+	} else {
+		sendPush("Your Ecobee thermostat " + notificationMessage)
+		sendActivityFeeds(notificationMessage)
+		atomicState.timeSendPush = now()
+	}
+	atomicState.authToken = null
 }
 
 def sendActivityFeeds(notificationMessage) {
-    def devices = getChildDevices()
-    devices.each { child ->
-        child.generateActivityFeedsEvent(notificationMessage) //parse received message from parent
-    }
+	def devices = getChildDevices()
+	devices.each { child ->
+		child.generateActivityFeedsEvent(notificationMessage) //parse received message from parent
+	}
+}
+
+def roundC (tempC) {
+	return String.format("%.1f", (Math.round(tempC * 2))/2)
+}
+
+def convertFtoC (tempF) {
+	return String.format("%.1f", (Math.round(((tempF - 32)*(5/9)) * 2))/2)
+}
+
+def convertCtoF (tempC) {
+	return (Math.round(tempC * (9/5)) + 32).toInteger()
 }

smartapps/smartthings/gentle-wake-up.src/gentle-wake-up.groovy

@@ -201,8 +201,8 @@ def completionPage() {
 
 		section("Switches") {
 			input(name: "completionSwitches", type: "capability.switch", title: "Set these switches", description: null, required: false, multiple: true, submitOnChange: true)
-			if (completionSwitches || androidClient()) {
-				input(name: "completionSwitchesState", type: "enum", title: "To", description: null, required: false, multiple: false, options: ["on", "off"], style: "segmented", defaultValue: "on")
+			if (completionSwitches) {
+				input(name: "completionSwitchesState", type: "enum", title: "To", description: null, required: false, multiple: false, options: ["on", "off"], defaultValue: "on")
 				input(name: "completionSwitchesLevel", type: "number", title: "Optionally, Set Dimmer Levels To", description: null, required: false, multiple: false, range: "(0..99)")
 			}
 		}

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -35,23 +35,11 @@ preferences {
 }
 
 def mainPage() {
-	if(canInstallLabs()) {
-		def bridges = bridgesDiscovered()
-		if (state.username && bridges) {
-			return bulbDiscovery()
-		} else {
-			return bridgeDiscovery()
-		}
+	def bridges = bridgesDiscovered()
+	if (state.username && bridges) {
+		return bulbDiscovery()
 	} else {
-		def upgradeNeeded = """To use SmartThings Labs, your Hub should be completely up to date.
-
-To update your Hub, access Location Settings in the Main Menu (tap the gear next to your location name), select your Hub, and choose "Update Hub"."""
-
-		return dynamicPage(name:"bridgeDiscovery", title:"Upgrade needed!", nextPage:"", install:false, uninstall: true) {
-			section("Upgrade") {
-				paragraph "$upgradeNeeded"
-			}
-		}
+		return bridgeDiscovery()
 	}
 }
 
@@ -326,6 +314,7 @@ def addBulbs() {
                         d = addChildDevice("smartthings", "Hue Bulb", dni, newHueBulb?.value.hub, ["label":newHueBulb?.value.name])
                     }
                     log.debug "created ${d.displayName} with id $dni"
+                    d.refresh()
                 } else {
                 	log.debug "$dni in not longer paired to the Hue Bridge or ID changed"
                 }
@@ -333,8 +322,8 @@ def addBulbs() {
             	//backwards compatable
 				newHueBulb = bulbs.find { (app.id + "/" + it.id) == dni }
 				d = addChildDevice("smartthings", "Hue Bulb", dni, newHueBulb?.hub, ["label":newHueBulb?.name])
+                d.refresh()
 			}
-			d.refresh()
 		} else {
 			log.debug "found ${d.displayName} with id $dni already exists, type: '$d.typeName'"
 			if (bulbs instanceof java.util.Map) {
@@ -764,14 +753,10 @@ private String convertHexToIP(hex) {
 	[convertHexToInt(hex[0..1]),convertHexToInt(hex[2..3]),convertHexToInt(hex[4..5]),convertHexToInt(hex[6..7])].join(".")
 }
 
-private Boolean canInstallLabs() {
-	return hasAllHubsOver("000.011.00603")
-}
-
 private Boolean hasAllHubsOver(String desiredFirmware) {
 	return realHubFirmwareVersions.every { fw -> fw >= desiredFirmware }
 }
 
 private List getRealHubFirmwareVersions() {
 	return location.hubs*.firmwareVersionString.findAll { it }
-}
+}

smartapps/smartthings/lock-it-when-i-leave.src/lock-it-when-i-leave.groovy

@@ -84,4 +84,4 @@ def sendMessage(msg) {
             sendPush msg
         }
     }
-}
+}

smartapps/smartthings/logitech-harmony-connect.src/logitech-harmony-connect.groovy

@@ -419,9 +419,11 @@ def addDevice() {
         def d = getChildDevice(dni)
         if(!d) {
             def newAction = state.HarmonyActivities.find { it.key == dni }
-            d = addChildDevice("smartthings", "Harmony Activity", dni, null, [label:"${newAction.value} [Harmony Activity]"])
-            log.trace "created ${d.displayName} with id $dni"
-            poll()
+            if (newAction) {
+	            d = addChildDevice("smartthings", "Harmony Activity", dni, null, [label:"${newAction.value} [Harmony Activity]"])
+	            log.trace "created ${d.displayName} with id $dni"
+	            poll()
+            }
         } else {
             log.trace "found ${d.displayName} with id $dni already exists"
         }

smartapps/smartthings/notify-me-when.src/i18n/messages.properties

@@ -0,0 +1,31 @@
+'''Acceleration Detected'''.ko=가속화 감지됨
+'''Arrival Of'''.ko=도착
+'''Both Push and SMS?'''.ko=푸시 메시지와 SMS를 모두 사용하시겠습니까?
+'''Button Pushed'''.ko=버튼이 눌렸습니다
+'''Contact Closes'''.ko=접점 닫힘
+'''Contact Opens'''.ko=접점 열림
+'''Departure Of'''.ko=출발
+'''Message Text'''.ko=문자 메시지
+'''Minutes'''.ko=분
+'''Motion Here'''.ko=동작
+'''Phone Number (for SMS, optional)'''.ko=휴대전화 번호(문자 메시지 - 옵션)
+'''Receive notifications when anything happens in your home.'''.ko=집 안에 무슨 일이 일어나면 알림이 전송됩니다.
+'''Smoke Detected'''.ko=연기가 감지되었습니다
+'''Switch Turned Off'''.ko=스위치 꺼짐
+'''Switch Turned On'''.ko=스위치 꺼짐
+'''Choose one or more, when...'''.ko=다음의 경우 하나 이상 선택
+'''Yes'''.ko=예
+'''No'''.ko=아니요
+'''Send this message (optional, sends standard status message if not specified)'''.ko=이 메시지 전송(선택적, 지정되지 않은 경우 표준 상태 메시지를 보냅니다)
+'''Via a push notification and/or an SMS message'''.ko=푸시 알림 및/또는 문자 메시지를 통해
+'''Set for specific mode(s)'''.ko=특정 모드 설정
+'''Tap to set'''.ko=눌러서 설정
+'''Minimum time between messages (optional, defaults to every message)'''.ko=메시지작 간 최소 시간(선택 사항, 모든 메시지의 기본 설정)
+'''If outside the US please make sure to enter the proper country code'''.ko=미국 이외 거주자는 적절한 국가 코드를 입력했는지 확인하십시오
+'''Water Sensor Wet'''.ko=Water Sensor에서 물이 감지되었습니다
+'''{{ triggerEvent.linkText }} has arrived at the {{ location.name }}'''.ko={{ triggerEvent.linkText }}님이 {{ location.name }}에 도착했습니다
+'''{{ triggerEvent.linkText }} has arrived at {{ location.name }}'''.ko={{ triggerEvent.linkText }}님이 {{ location.name }}에 도착했습니다
+'''{{ triggerEvent.linkText }} has left the {{ location.name }}'''.ko={{ triggerEvent.linkText }}님이 {{ location.name }}을(를) 떠났습니다
+'''{{ triggerEvent.linkText }} has left {{ location.name }}'''.ko={{ triggerEvent.linkText }}님이 {{ location.name }}을(를) 떠났습니다
+'''Assign a name'''.ko=이름 배정
+'''Choose Modes'''.ko=모드 선택

smartapps/smartthings/notify-me-when.src/notify-me-when.groovy

@@ -20,19 +20,19 @@
  *	2014-10-03:	Added capability.button device picker and button.pushed event subscription. For Doorbell.
  */
 definition(
-    name: "Notify Me When",
-    namespace: "smartthings",
-    author: "SmartThings",
-    description: "Receive notifications when anything happens in your home.",
-    category: "Convenience",
-    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Meta/window_contact.png",
-    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Meta/window_contact@2x.png"
+		name: "Notify Me When",
+		namespace: "smartthings",
+		author: "SmartThings",
+		description: "Receive notifications when anything happens in your home.",
+		category: "Convenience",
+		iconUrl: "https://s3.amazonaws.com/smartapp-icons/Meta/window_contact.png",
+		iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Meta/window_contact@2x.png"
 )
 
 preferences {
 	section("Choose one or more, when..."){
 		input "button", "capability.button", title: "Button Pushed", required: false, multiple: true //tw
-        input "motion", "capability.motionSensor", title: "Motion Here", required: false, multiple: true
+		input "motion", "capability.motionSensor", title: "Motion Here", required: false, multiple: true
 		input "contact", "capability.contactSensor", title: "Contact Opens", required: false, multiple: true
 		input "contactClosed", "capability.contactSensor", title: "Contact Closes", required: false, multiple: true
 		input "acceleration", "capability.accelerationSensor", title: "Acceleration Detected", required: false, multiple: true
@@ -47,11 +47,11 @@ preferences {
 		input "messageText", "text", title: "Message Text", required: false
 	}
 	section("Via a push notification and/or an SMS message"){
-        input("recipients", "contact", title: "Send notifications to") {
-            input "phone", "phone", title: "Phone Number (for SMS, optional)", required: false
-            paragraph "If outside the US please make sure to enter the proper country code"
-            input "pushAndPhone", "enum", title: "Both Push and SMS?", required: false, options: ["Yes", "No"]
-        }
+		input("recipients", "contact", title: "Send notifications to") {
+			input "phone", "phone", title: "Phone Number (for SMS, optional)", required: false
+			paragraph "If outside the US please make sure to enter the proper country code"
+			input "pushAndPhone", "enum", title: "Both Push and SMS?", required: false, options: ["Yes", "No"]
+		}
 	}
 	section("Minimum time between messages (optional, defaults to every message)") {
 		input "frequency", "decimal", title: "Minutes", required: false
@@ -71,7 +71,7 @@ def updated() {
 
 def subscribeToEvents() {
 	subscribe(button, "button.pushed", eventHandler) //tw
-    subscribe(contact, "contact.open", eventHandler)
+	subscribe(contact, "contact.open", eventHandler)
 	subscribe(contactClosed, "contact.closed", eventHandler)
 	subscribe(acceleration, "acceleration.active", eventHandler)
 	subscribe(motion, "motion.active", eventHandler)
@@ -99,49 +99,55 @@ def eventHandler(evt) {
 }
 
 private sendMessage(evt) {
-	def msg = messageText ?: defaultText(evt)
+	String msg = messageText
+	Map options = [:]
+
+	if (!messageText) {
+		msg = defaultText(evt)
+		options = [translatable: true, triggerEvent: evt]
+	}
 	log.debug "$evt.name:$evt.value, pushAndPhone:$pushAndPhone, '$msg'"
 
-    if (location.contactBookEnabled) {
-        sendNotificationToContacts(msg, recipients)
-    }
-    else {
+	if (location.contactBookEnabled) {
+		sendNotificationToContacts(msg, recipients, options)
+	} else {
+		if (!phone || pushAndPhone != 'No') {
+			log.debug 'sending push'
+			options.method = 'push'
+			//sendPush(msg)
+		}
+		if (phone) {
+			options.phone = phone
+			log.debug 'sending SMS'
+			//sendSms(phone, msg)
+		}
+		sendNotification(msg, options)
+	}
 
-        if (!phone || pushAndPhone != "No") {
-            log.debug "sending push"
-            sendPush(msg)
-        }
-        if (phone) {
-            log.debug "sending SMS"
-            sendSms(phone, msg)
-        }
-    }
 	if (frequency) {
 		state[evt.deviceId] = now()
 	}
 }
 
 private defaultText(evt) {
-	if (evt.name == "presence") {
-		if (evt.value == "present") {
+	if (evt.name == 'presence') {
+		if (evt.value == 'present') {
 			if (includeArticle) {
-				"$evt.linkText has arrived at the $location.name"
+				'{{ triggerEvent.linkText }} has arrived at the {{ location.name }}'
 			}
 			else {
-				"$evt.linkText has arrived at $location.name"
+				'{{ triggerEvent.linkText }} has arrived at {{ location.name }}'
 			}
-		}
-		else {
+		} else {
 			if (includeArticle) {
-				"$evt.linkText has left the $location.name"
+				'{{ triggerEvent.linkText }} has left the {{ location.name }}'
 			}
 			else {
-				"$evt.linkText has left $location.name"
+				'{{ triggerEvent.linkText }} has left {{ location.name }}'
 			}
 		}
-	}
-	else {
-		evt.descriptionText
+	} else {
+		'{{ triggerEvent.descriptionText }}'
 	}
 }
 

smartapps/smartthings/samsung-tv-connect.src/samsung-tv-connect.groovy

@@ -316,60 +316,40 @@ private def parseEventMessage(String description) {
 	parts.each { part ->
 		part = part.trim()
 		if (part.startsWith('devicetype:')) {
-			def valueString = part.split(":")[1].trim()
-			event.devicetype = valueString
+			part -= "devicetype:"
+			event.devicetype = part.trim()
 		}
 		else if (part.startsWith('mac:')) {
-			def valueString = part.split(":")[1].trim()
-			if (valueString) {
-				event.mac = valueString
-			}
+			part -= "mac:"
+			event.mac = part.trim()
 		}
 		else if (part.startsWith('networkAddress:')) {
-			def valueString = part.split(":")[1].trim()
-			if (valueString) {
-				event.ip = valueString
-			}
+			part -= "networkAddress:"
+			event.ip = part.trim()
 		}
 		else if (part.startsWith('deviceAddress:')) {
-			def valueString = part.split(":")[1].trim()
-			if (valueString) {
-				event.port = valueString
-			}
+			part -= "deviceAddress:"
+			event.port = part.trim()
 		}
 		else if (part.startsWith('ssdpPath:')) {
-			def valueString = part.split(":")[1].trim()
-			if (valueString) {
-				event.ssdpPath = valueString
-			}
+			part -= "ssdpPath:"
+			event.ssdpPath = part.trim()
 		}
 		else if (part.startsWith('ssdpUSN:')) {
 			part -= "ssdpUSN:"
-			def valueString = part.trim()
-			if (valueString) {
-				event.ssdpUSN = valueString
-			}
+			event.ssdpUSN = part.trim()
 		}
 		else if (part.startsWith('ssdpTerm:')) {
 			part -= "ssdpTerm:"
-			def valueString = part.trim()
-			if (valueString) {
-				event.ssdpTerm = valueString
-			}
+			event.ssdpTerm = part.trim()
 		}
 		else if (part.startsWith('headers')) {
 			part -= "headers:"
-			def valueString = part.trim()
-			if (valueString) {
-				event.headers = valueString
-			}
+			event.headers = part.trim()
 		}
 		else if (part.startsWith('body')) {
 			part -= "body:"
-			def valueString = part.trim()
-			if (valueString) {
-				event.body = valueString
-			}
+			event.body = part.trim()
 		}
 	}
 	event

smartapps/smartthings/wemo-connect.src/wemo-connect.groovy

@@ -16,14 +16,14 @@
  *  Date: 2013-09-06
  */
 definition(
-    name: "Wemo (Connect)",
-    namespace: "smartthings",
-    author: "SmartThings",
-    description: "Allows you to integrate your WeMo Switch and Wemo Motion sensor with SmartThings.",
-    category: "SmartThings Labs",
-    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/wemo.png",
-    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/wemo@2x.png",
-    singleInstance: true
+	name: "Wemo (Connect)",
+	namespace: "smartthings",
+	author: "SmartThings",
+	description: "Allows you to integrate your WeMo Switch and Wemo Motion sensor with SmartThings.",
+	category: "SmartThings Labs",
+	iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/wemo.png",
+	iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/wemo@2x.png",
+	singleInstance: true
 )
 
 preferences {
@@ -39,7 +39,7 @@ private getFriendlyName(String deviceNetworkId) {
 	sendHubCommand(new physicalgraph.device.HubAction("""GET /setup.xml HTTP/1.1
 HOST: ${deviceNetworkId}
 
-""", physicalgraph.device.Protocol.LAN, "${deviceNetworkId}"))
+""", physicalgraph.device.Protocol.LAN, "${deviceNetworkId}", [callback: "setupHandler"]))
 }
 
 private verifyDevices() {
@@ -52,6 +52,13 @@ private verifyDevices() {
 	}
 }
 
+void ssdpSubscribe() {
+	subscribe(location, "ssdpTerm.urn:Belkin:device:insight:1", ssdpSwitchHandler)
+	subscribe(location, "ssdpTerm.urn:Belkin:device:controllee:1", ssdpSwitchHandler)
+	subscribe(location, "ssdpTerm.urn:Belkin:device:sensor:1", ssdpMotionHandler)
+	subscribe(location, "ssdpTerm.urn:Belkin:device:lightswitch:1", ssdpLightSwitchHandler)
+}
+
 def firstPage()
 {
 	if(canInstallLabs())
@@ -62,7 +69,7 @@ def firstPage()
 
 		log.debug "REFRESH COUNT :: ${refreshCount}"
 
-		subscribe(location, null, locationHandler, [filterEvents:false])
+		ssdpSubscribe()
 
 		//ssdp request every 25 seconds
 		if((refreshCount % 5) == 0) {
@@ -105,9 +112,7 @@ def devicesDiscovered() {
 	def motions = getWemoMotions()
 	def lightSwitches = getWemoLightSwitches()
 	def devices = switches + motions + lightSwitches
-	def list = []
-
-	list = devices?.collect{ [app.id, it.ssdpUSN].join('.') }
+	devices?.collect{ [app.id, it.ssdpUSN].join('.') }
 }
 
 def switchesDiscovered() {
@@ -175,8 +180,9 @@ def updated() {
 
 def initialize() {
 	unsubscribe()
-    unschedule()
-	subscribe(location, null, locationHandler, [filterEvents:false])
+	unschedule()
+
+	ssdpSubscribe()
 
 	if (selectedSwitches)
 		addSwitches()
@@ -189,7 +195,7 @@ def initialize() {
 
 	runIn(5, "subscribeToDevices") //initial subscriptions delayed by 5 seconds
 	runIn(10, "refreshDevices") //refresh devices, delayed by 10 seconds
-    runEvery5Minutes("refresh")
+	runEvery5Minutes("refresh")
 }
 
 def resubscribe() {
@@ -199,7 +205,7 @@ def resubscribe() {
 
 def refresh() {
 	log.debug "refresh() called"
-    doDeviceSync()
+	doDeviceSync()
 	refreshDevices()
 }
 
@@ -235,14 +241,14 @@ def addSwitches() {
 		if (!d) {
 			log.debug "Creating WeMo Switch with dni: ${selectedSwitch.value.mac}"
 			d = addChildDevice("smartthings", "Wemo Switch", selectedSwitch.value.mac, selectedSwitch?.value.hub, [
-					"label": selectedSwitch?.value?.name ?: "Wemo Switch",
-					"data": [
-							"mac": selectedSwitch.value.mac,
-							"ip": selectedSwitch.value.ip,
-							"port": selectedSwitch.value.port
-					]
+				"label": selectedSwitch?.value?.name ?: "Wemo Switch",
+				"data": [
+					"mac": selectedSwitch.value.mac,
+					"ip": selectedSwitch.value.ip,
+					"port": selectedSwitch.value.port
+				]
 			])
-      def ipvalue = convertHexToIP(selectedSwitch.value.ip)
+			def ipvalue = convertHexToIP(selectedSwitch.value.ip)
 			d.sendEvent(name: "currentIP", value: ipvalue, descriptionText: "IP is ${ipvalue}")
 			log.debug "Created ${d.displayName} with id: ${d.id}, dni: ${d.deviceNetworkId}"
 		} else {
@@ -273,9 +279,9 @@ def addMotions() {
 					"port": selectedMotion.value.port
 				]
 			])
-      def ipvalue = convertHexToIP(selectedMotion.value.ip)
-      d.sendEvent(name: "currentIP", value: ipvalue, descriptionText: "IP is ${ipvalue}")
-      log.debug "Created ${d.displayName} with id: ${d.id}, dni: ${d.deviceNetworkId}"
+			def ipvalue = convertHexToIP(selectedMotion.value.ip)
+			d.sendEvent(name: "currentIP", value: ipvalue, descriptionText: "IP is ${ipvalue}")
+			log.debug "Created ${d.displayName} with id: ${d.id}, dni: ${d.deviceNetworkId}"
 		} else {
 			log.debug "found ${d.displayName} with id $dni already exists"
 		}
@@ -304,26 +310,147 @@ def addLightSwitches() {
 					"port": selectedLightSwitch.value.port
 				]
 			])
-      def ipvalue = convertHexToIP(selectedLightSwitch.value.ip)
-      d.sendEvent(name: "currentIP", value: ipvalue, descriptionText: "IP is ${ipvalue}")
+			def ipvalue = convertHexToIP(selectedLightSwitch.value.ip)
+			d.sendEvent(name: "currentIP", value: ipvalue, descriptionText: "IP is ${ipvalue}")
 			log.debug "created ${d.displayName} with id $dni"
 		} else {
-		   log.debug "found ${d.displayName} with id $dni already exists"
+			log.debug "found ${d.displayName} with id $dni already exists"
 		}
 	}
 }
 
+def ssdpSwitchHandler(evt) {
+	def description = evt.description
+	def hub = evt?.hubId
+	def parsedEvent = parseDiscoveryMessage(description)
+	parsedEvent << ["hub":hub]
+	log.debug parsedEvent
+
+	def switches = getWemoSwitches()
+	if (!(switches."${parsedEvent.ssdpUSN.toString()}")) {
+		//if it doesn't already exist
+		switches << ["${parsedEvent.ssdpUSN.toString()}":parsedEvent]
+	} else {
+		log.debug "Device was already found in state..."
+		def d = switches."${parsedEvent.ssdpUSN.toString()}"
+		boolean deviceChangedValues = false
+		log.debug "$d.ip <==> $parsedEvent.ip"
+		if(d.ip != parsedEvent.ip || d.port != parsedEvent.port) {
+			d.ip = parsedEvent.ip
+			d.port = parsedEvent.port
+			deviceChangedValues = true
+			log.debug "Device's port or ip changed..."
+			def child = getChildDevice(parsedEvent.mac)
+			child.subscribe(parsedEvent.ip, parsedEvent.port)
+			child.poll()
+		}
+	}
+}
+
+def ssdpMotionHandler(evt) {
+	log.info("ssdpMotionHandler")
+	def description = evt.description
+	def hub = evt?.hubId
+	def parsedEvent = parseDiscoveryMessage(description)
+	parsedEvent << ["hub":hub]
+	log.debug parsedEvent
+
+	def motions = getWemoMotions()
+	if (!(motions."${parsedEvent.ssdpUSN.toString()}")) {
+		//if it doesn't already exist
+		motions << ["${parsedEvent.ssdpUSN.toString()}":parsedEvent]
+	} else { // just update the values
+		log.debug "Device was already found in state..."
+
+		def d = motions."${parsedEvent.ssdpUSN.toString()}"
+		boolean deviceChangedValues = false
+
+		if(d.ip != parsedEvent.ip || d.port != parsedEvent.port) {
+			d.ip = parsedEvent.ip
+			d.port = parsedEvent.port
+			deviceChangedValues = true
+			log.debug "Device's port or ip changed..."
+		}
+
+		if (deviceChangedValues) {
+			def children = getChildDevices()
+			log.debug "Found children ${children}"
+			children.each {
+				if (it.getDeviceDataByName("mac") == parsedEvent.mac) {
+					log.debug "updating ip and port, and resubscribing, for device ${it} with mac ${parsedEvent.mac}"
+					it.subscribe(parsedEvent.ip, parsedEvent.port)
+				}
+			}
+		}
+	}
+}
+
+def ssdpLightSwitchHandler(evt) {
+	log.info("ssdpLightSwitchHandler")
+	def description = evt.description
+	def hub = evt?.hubId
+	def parsedEvent = parseDiscoveryMessage(description)
+	parsedEvent << ["hub":hub]
+	log.debug parsedEvent
+
+	def lightSwitches = getWemoLightSwitches()
+
+	if (!(lightSwitches."${parsedEvent.ssdpUSN.toString()}")) {
+		//if it doesn't already exist
+		lightSwitches << ["${parsedEvent.ssdpUSN.toString()}":parsedEvent]
+	} else {
+		log.debug "Device was already found in state..."
+
+		def d = lightSwitches."${parsedEvent.ssdpUSN.toString()}"
+		boolean deviceChangedValues = false
+
+		if(d.ip != parsedEvent.ip || d.port != parsedEvent.port) {
+			d.ip = parsedEvent.ip
+			d.port = parsedEvent.port
+			deviceChangedValues = true
+			log.debug "Device's port or ip changed..."
+			def child = getChildDevice(parsedEvent.mac)
+			log.debug "updating ip and port, and resubscribing, for device with mac ${parsedEvent.mac}"
+			child.subscribe(parsedEvent.ip, parsedEvent.port)
+		}
+	}
+}
+
+void setupHandler(hubResponse) {
+	String contentType = hubResponse?.headers['Content-Type']
+	if (contentType != null && contentType == 'text/xml') {
+		def body = hubResponse.xml
+		def wemoDevices = []
+		String deviceType = body?.device?.deviceType?.text() ?: ""
+		if (deviceType.startsWith("urn:Belkin:device:controllee:1") || deviceType.startsWith("urn:Belkin:device:insight:1")) {
+			wemoDevices = getWemoSwitches()
+		} else if (deviceType.startsWith("urn:Belkin:device:sensor")) {
+			wemoDevices = getWemoMotions()
+		} else if (deviceType.startsWith("urn:Belkin:device:lightswitch")) {
+			wemoDevices = getWemoLightSwitches()
+		}
+
+		def wemoDevice = wemoDevices.find {it?.key?.contains(body?.device?.UDN?.text())}
+		if (wemoDevice) {
+			wemoDevice.value << [name:body?.device?.friendlyName?.text(), verified: true]
+		} else {
+			log.error "/setup.xml returned a wemo device that didn't exist"
+		}
+	}
+}
+
+@Deprecated
 def locationHandler(evt) {
 	def description = evt.description
 	def hub = evt?.hubId
 	def parsedEvent = parseDiscoveryMessage(description)
 	parsedEvent << ["hub":hub]
-    log.debug parsedEvent
+	log.debug parsedEvent
 
 	if (parsedEvent?.ssdpTerm?.contains("Belkin:device:controllee") || parsedEvent?.ssdpTerm?.contains("Belkin:device:insight")) {
 		def switches = getWemoSwitches()
 		if (!(switches."${parsedEvent.ssdpUSN.toString()}")) {
-        	//if it doesn't already exist
+			//if it doesn't already exist
 			switches << ["${parsedEvent.ssdpUSN.toString()}":parsedEvent]
 		} else {
 			log.debug "Device was already found in state..."
@@ -335,16 +462,16 @@ def locationHandler(evt) {
 				d.port = parsedEvent.port
 				deviceChangedValues = true
 				log.debug "Device's port or ip changed..."
-                def child = getChildDevice(parsedEvent.mac)
+				def child = getChildDevice(parsedEvent.mac)
 				child.subscribe(parsedEvent.ip, parsedEvent.port)
-                child.poll()
+				child.poll()
 			}
 		}
 	}
 	else if (parsedEvent?.ssdpTerm?.contains("Belkin:device:sensor")) {
 		def motions = getWemoMotions()
 		if (!(motions."${parsedEvent.ssdpUSN.toString()}")) {
-        	//if it doesn't already exist
+			//if it doesn't already exist
 			motions << ["${parsedEvent.ssdpUSN.toString()}":parsedEvent]
 		} else { // just update the values
 			log.debug "Device was already found in state..."
@@ -459,6 +586,7 @@ def locationHandler(evt) {
 	}
 }
 
+@Deprecated
 private def parseXmlBody(def body) {
 	def decodedBytes = body.decodeBase64()
 	def bodyString
@@ -473,68 +601,48 @@ private def parseXmlBody(def body) {
 }
 
 private def parseDiscoveryMessage(String description) {
-	def device = [:]
+	def event = [:]
 	def parts = description.split(',')
 	parts.each { part ->
 		part = part.trim()
 		if (part.startsWith('devicetype:')) {
-			def valueString = part.split(":")[1].trim()
-			device.devicetype = valueString
+			part -= "devicetype:"
+			event.devicetype = part.trim()
 		}
 		else if (part.startsWith('mac:')) {
-			def valueString = part.split(":")[1].trim()
-			if (valueString) {
-				device.mac = valueString
-			}
+			part -= "mac:"
+			event.mac = part.trim()
 		}
 		else if (part.startsWith('networkAddress:')) {
-			def valueString = part.split(":")[1].trim()
-			if (valueString) {
-				device.ip = valueString
-			}
+			part -= "networkAddress:"
+			event.ip = part.trim()
 		}
 		else if (part.startsWith('deviceAddress:')) {
-			def valueString = part.split(":")[1].trim()
-			if (valueString) {
-				device.port = valueString
-			}
+			part -= "deviceAddress:"
+			event.port = part.trim()
 		}
 		else if (part.startsWith('ssdpPath:')) {
-			def valueString = part.split(":")[1].trim()
-			if (valueString) {
-				device.ssdpPath = valueString
-			}
+			part -= "ssdpPath:"
+			event.ssdpPath = part.trim()
 		}
 		else if (part.startsWith('ssdpUSN:')) {
 			part -= "ssdpUSN:"
-			def valueString = part.trim()
-			if (valueString) {
-				device.ssdpUSN = valueString
-			}
+			event.ssdpUSN = part.trim()
 		}
 		else if (part.startsWith('ssdpTerm:')) {
 			part -= "ssdpTerm:"
-			def valueString = part.trim()
-			if (valueString) {
-				device.ssdpTerm = valueString
-			}
+			event.ssdpTerm = part.trim()
 		}
 		else if (part.startsWith('headers')) {
 			part -= "headers:"
-			def valueString = part.trim()
-			if (valueString) {
-				device.headers = valueString
-			}
+			event.headers = part.trim()
 		}
 		else if (part.startsWith('body')) {
 			part -= "body:"
-			def valueString = part.trim()
-			if (valueString) {
-				device.body = valueString
-			}
+			event.body = part.trim()
 		}
 	}
-	device
+	event
 }
 
 def doDeviceSync(){
@@ -560,4 +668,4 @@ private Boolean hasAllHubsOver(String desiredFirmware) {
 
 private List getRealHubFirmwareVersions() {
 	return location.hubs*.firmwareVersionString.findAll { it }
-}
+}