MSA-1395: Smart Family Presence is a smart app with no handlers or device type dependencies.

The presence sensors have little/no configuration, especially when it comes to alerts.  I found lots of room for improvement regarding how those alerts are carried out.  Here are the problems with the original implementation of presence alerts:

1)  Each person gets and individual alert.  If you have a family of 4, each person will receive a *separate* alert for every person.
2)  There are no exceptions.  Even if the family is all together, it still individually alerts that everyone arrived/departed.
3)  Since you can't control which person gets the push alert, #1 and #2 exacerbate the issue by people receiving alerts for themselves.

The Smart Family Presence app lets the user select how and when they receive alerts.  The code is commented to explain the edge cases, but essentially, if the family arrives or departs together, no alert should be sent.  The app tracks state for whether the family was previously apart, so that it knows when and when not to send alerts.

I have found this code extremely fun to write and configure, and I believe others out in the community could benefit from it as I saw very few smart apps related to presence sensors themselves.

devicetypes/smartthings/aeon-multisensor-6.src/aeon-multisensor-6.groovy

@@ -22,6 +22,7 @@ metadata {
 		capability "Configuration"
 		capability "Sensor"
 		capability "Battery"
+		capability "Health Check"
 
 		attribute "tamper", "enum", ["detected", "clear"]
 		attribute "batteryStatus", "string"
@@ -326,6 +327,9 @@ def zwaveEvent(physicalgraph.zwave.Command cmd) {
 }
 
 def configure() {
+	// allow device user configured or default 16 min to check in; double the periodic reporting interval
+	sendEvent(name: "checkInterval", value: 2* timeOptionValueMap[reportInterval] ?: 2*8*60, displayed: false)
+
 	// This sensor joins as a secure device if you double-click the button to include it
 	log.debug "${device.displayName} is configuring its settings"
 	def request = []

devicetypes/smartthings/aeon-multisensor-gen5.src/aeon-multisensor-gen5.groovy

@@ -20,6 +20,9 @@ metadata {
 		capability "Configuration"
 		capability "Sensor"
 		capability "Battery"
+		capability "Health Check"
+
+		command "configureAfterSecure"
 
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x86,0x72,0x59,0x85,0x73,0x71,0x84,0x80,0x30,0x31,0x70,0x98,0x7A", outClusters:"0x5A"
 	}
@@ -245,6 +248,8 @@ def configureAfterSecure() {
 def configure() {
 	// log.debug "configure()"
     //["delay 30000"] + secure(zwave.securityV1.securityCommandsSupportedGet())
+	// allow device 16 min to check in; double the periodic reporting interval
+	sendEvent(name: "checkInterval", value: 2*8*60, displayed: false)
 }
 
 private setConfigured() {

devicetypes/smartthings/aeon-multisensor.src/aeon-multisensor.groovy

@@ -20,6 +20,7 @@ metadata {
 		capability "Illuminance Measurement"
 		capability "Sensor"
 		capability "Battery"
+		capability "Health Check"
 
 		fingerprint deviceId: "0x2001", inClusters: "0x30,0x31,0x80,0x84,0x70,0x85,0x72,0x86"
 	}
@@ -180,6 +181,9 @@ def zwaveEvent(physicalgraph.zwave.Command cmd) {
 }
 
 def configure() {
+	// allow device 10 min to check in; double the periodic reporting interval
+	sendEvent(name: "checkInterval", value: 2*5*60, displayed: false)
+
 	delayBetween([
 		// send binary sensor report instead of basic set for motion
 		zwave.configurationV1.configurationSet(parameterNumber: 5, size: 1, scaledConfigurationValue: 2).format(),

devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy

@@ -15,12 +15,13 @@
  */
  
 metadata {
-	definition (name: "SmartSense Open/Closed Sensor", namespace: "smartthings", author: "SmartThings") {
+	definition (name: "SmartSense Open/Closed Sensor", namespace: "smartthings", author: "SmartThings", category: "C2") {
 		capability "Battery"
 		capability "Configuration"
 		capability "Contact Sensor"
 		capability "Refresh"
 		capability "Temperature Measurement"
+		capability "Health Check"
         
 		command "enrollResponse"
  
@@ -273,7 +274,8 @@ def refresh() {
 }
 
 def configure() {
-
+	sendEvent(name: "checkInterval", value: 7200, displayed: false)
+	
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."
 	def configCmds = [

devicetypes/smartthings/zwave-door-window-sensor.src/zwave-door-window-sensor.groovy

@@ -28,7 +28,7 @@ metadata {
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x98"
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x86,0x72,0x98", outClusters: "0x5A,0x82"
 		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x80,0x71,0x85,0x70,0x72,0x86,0x30,0x31,0x84,0x59,0x73,0x5A,0x8F,0x98,0x7A", outClusters:"0x20" // Philio multi+
-		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x72,0x5A,0x80,0x73,0x86,0x84,0x85,0x59,0x71,0x70,0x7A,0x98" // Vision door/window
+		fingerprint deviceId: "0x0701", inClusters: "0x5E,0x72,0x5A,0x80,0x73,0x84,0x85,0x59,0x71,0x70,0x7A,0x98" // Vision door/window
 	}
 
 	// simulator metadata
@@ -81,22 +81,22 @@ def updated() {
 	def cmds = []
 	if (!state.MSR) {
 		cmds = [
-			zwave.manufacturerSpecificV2.manufacturerSpecificGet().format(),
+			command(zwave.manufacturerSpecificV2.manufacturerSpecificGet()),
 			"delay 1200",
-			zwave.wakeUpV1.wakeUpNoMoreInformation().format()
+			zwave.wakeUpV1.wakeUpNoMoreInformation()
 		]
 	} else if (!state.lastbat) {
 		cmds = []
 	} else {
-		cmds = [zwave.wakeUpV1.wakeUpNoMoreInformation().format()]
+		cmds = [zwave.wakeUpV1.wakeUpNoMoreInformation()]
 	}
 	response(cmds)
 }
 
 def configure() {
-	delayBetween([
-		zwave.manufacturerSpecificV2.manufacturerSpecificGet().format(),
-		batteryGetCommand()
+	commands([
+		zwave.manufacturerSpecificV2.manufacturerSpecificGet(),
+		zwave.batteryV1.batteryGet()
 	], 6000)
 }
 
@@ -147,12 +147,11 @@ def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cm
 			result << sensorValueEvent(1)
 		} else if (cmd.event == 0x03) {
 			result << createEvent(descriptionText: "$device.displayName covering was removed", isStateChange: true)
-			result << response(zwave.wakeUpV1.wakeUpIntervalSet(seconds:4*3600, nodeid:zwaveHubNodeId))
-			if(!state.MSR) result << response(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
+			if(!state.MSR) result << response(command(zwave.manufacturerSpecificV2.manufacturerSpecificGet()))
 		} else if (cmd.event == 0x05 || cmd.event == 0x06) {
 			result << createEvent(descriptionText: "$device.displayName detected glass breakage", isStateChange: true)
 		} else if (cmd.event == 0x07) {
-			if(!state.MSR) result << response(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
+			if(!state.MSR) result << response(command(zwave.manufacturerSpecificV2.manufacturerSpecificGet()))
 			result << createEvent(name: "motion", value: "active", descriptionText:"$device.displayName detected motion")
 		}
 	} else if (cmd.notificationType) {
@@ -170,14 +169,13 @@ def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd)
 	def event = createEvent(descriptionText: "${device.displayName} woke up", isStateChange: false)
 	def cmds = []
 	if (!state.MSR) {
-		cmds << zwave.wakeUpV1.wakeUpIntervalSet(seconds:4*3600, nodeid:zwaveHubNodeId).format()
-		cmds << zwave.manufacturerSpecificV2.manufacturerSpecificGet().format()
+		cmds << command(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
 		cmds << "delay 1200"
 	}
 	if (!state.lastbat || now() - state.lastbat > 53*60*60*1000) {
-		cmds << batteryGetCommand()
+		cmds << command(zwave.batteryV1.batteryGet())
 	} else {
-		cmds << zwave.wakeUpV1.wakeUpNoMoreInformation().format()
+		cmds << zwave.wakeUpV1.wakeUpNoMoreInformation()
 	}
 	[event, response(cmds)]
 }
@@ -212,7 +210,7 @@ def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerS
 		if (msr == "0086-0102-0059") {
 			result << response(zwave.securityV1.securityMessageEncapsulation().encapsulate(zwave.batteryV1.batteryGet()).format())
 		} else {
-			result << response(batteryGetCommand())
+			result << response(command(zwave.batteryV1.batteryGet()))
 		}
 	}
 
@@ -220,7 +218,7 @@ def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerS
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
-	def encapsulatedCommand = cmd.encapsulatedCommand([0x20: 1, 0x85: 2, 0x70: 1])
+	def encapsulatedCommand = cmd.encapsulatedCommand([0x20: 1, 0x25: 1, 0x30: 1, 0x31: 5, 0x80: 1, 0x84: 1, 0x71: 3, 0x9C: 1])
 	// log.debug "encapsulated: $encapsulatedCommand"
 	if (encapsulatedCommand) {
 		state.sec = 1
@@ -232,12 +230,16 @@ def zwaveEvent(physicalgraph.zwave.Command cmd) {
 	createEvent(descriptionText: "$device.displayName: $cmd", displayed: false)
 }
 
-def batteryGetCommand() {
-	def cmd = zwave.batteryV1.batteryGet()
-	if (state.sec) {
-		cmd = zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd)
+private command(physicalgraph.zwave.Command cmd) {
+	if (state.sec == 1) {
+		zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
+	} else {
+		cmd.format()
 	}
-	cmd.format()
+}
+
+private commands(commands, delay=200) {
+	delayBetween(commands.collect{ command(it) }, delay)
 }
 
 def retypeBasedOnMSR() {
@@ -260,8 +262,12 @@ def retypeBasedOnMSR() {
 			setDeviceType("3-in-1 Multisensor Plus (SG)")
 			break
 		case "0109-2001-0106":  // Vision door/window
-			log.debug "Changing device type to Door / Window Sensor Plus (SG)"
-			setDeviceType("Door / Window Sensor Plus (SG)")
+			log.debug "Changing device type to Z-Wave Plus Door/Window Sensor"
+			setDeviceType("Z-Wave Plus Door/Window Sensor")
+			break
+		case "0109-2002-0205": // Vision Motion
+			log.debug "Changing device type to Z-Wave Plus Motion/Temp Sensor"
+			setDeviceType("Z-Wave Plus Motion/Temp Sensor")
 			break
 	}
 }

devicetypes/smartthings/zwave-plus-door-window-sensor.src/zwave-plus-door-window-sensor.groovy

@@ -0,0 +1,270 @@
+/**
+*	Copyright 2016 SmartThings
+*	Copyright 2015 AstraLink
+*
+*	Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+*	in compliance with the License. You may obtain a copy of the License at:
+*
+*		http://www.apache.org/licenses/LICENSE-2.0
+*
+*	Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+*	on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+*	for the specific language governing permissions and limitations under the License.
+*
+*	Z-Wave Plus Door/Window Sensor, ZD2102*-5
+*
+*/
+
+metadata {
+	definition (name: "Z-Wave Plus Door/Window Sensor", namespace: "smartthings", author: "SmartThings") {
+		capability "Contact Sensor"
+		capability "Configuration"
+		capability "Battery"
+		capability "Sensor"
+
+		// for Astralink
+		attribute "ManufacturerCode", "string"
+		attribute "ProduceTypeCode", "string"
+		attribute "ProductCode", "string"
+		attribute "WakeUp", "string"
+		attribute "WirelessConfig", "string"
+
+		fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x98, 0x86, 0x72, 0x5A, 0x85, 0x59, 0x73, 0x80, 0x71, 0x70, 0x84, 0x7A"
+		fingerprint type:"8C07", inClusters: "5E,98,86,72,5A,71"
+		fingerprint mfr:"0109", prod:"2001", model:"0106"  // not using deviceJoinName because it's sold under different brand names
+	}
+
+	tiles(scale: 2) {
+		multiAttributeTile(name:"contact", type: "generic", width: 6, height: 4){
+			tileAttribute ("device.contact", key: "PRIMARY_CONTROL") {
+				attributeState "open", label:'${name}', icon:"st.contact.contact.open", backgroundColor:"#ffa81e"
+				attributeState "closed", label:'${name}', icon:"st.contact.contact.closed", backgroundColor:"#79b821"
+			}
+		}
+		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
+			state "battery", label:'${currentValue}% battery', unit:""
+		}
+
+		main (["contact"])
+		details(["contact","battery"])
+	}
+
+	simulator {
+		// messages the device returns in response to commands it receives
+		status "open (basic)" : "command: 9881, payload: 00 20 01 FF"
+		status "closed (basic)" : "command: 9881 payload: 00 20 01 00"
+		status "open (notification)" : "command: 9881, payload: 00 71 05 06 FF 00 FF 06 16 00 00"
+		status "closed (notification)" : "command: 9881, payload: 00 71 05 06 00 00 FF 06 17 00 00"
+		status "tamper: enclosure opened" : "command: 9881, payload: 00 71 05 07 FF 00 FF 07 03 00 00"
+		status "tamper: enclosure replaced" : "command: 9881, payload: 00 71 05 07 00 00 FF 07 00 00 00"
+		status "wake up" : "command: 9881, payload: 00 84 07"
+		status "battery (100%)" : "command: 9881, payload: 00 80 03 64"
+		status "battery low" : "command: 9881, payload: 00 80 03 FF"
+	}
+}
+
+def configure() {
+	log.debug "configure()"
+	def cmds = []
+
+	if (state.sec != 1) {
+		// secure inclusion may not be complete yet
+		cmds << "delay 1000"
+	}
+
+	cmds += secureSequence([
+		zwave.manufacturerSpecificV2.manufacturerSpecificGet(),
+		zwave.batteryV1.batteryGet(),
+	], 500)
+
+	cmds << "delay 8000"
+	cmds << secure(zwave.wakeUpV1.wakeUpNoMoreInformation())
+	return cmds
+}
+
+private getCommandClassVersions() {
+	[
+		0x71: 3,  // Notification
+		0x5E: 2,  // ZwaveplusInfo
+		0x59: 1,  // AssociationGrpInfo
+		0x85: 2,  // Association
+		0x20: 1,  // Basic
+		0x80: 1,  // Battery
+		0x70: 1,  // Configuration
+		0x5A: 1,  // DeviceResetLocally
+		0x7A: 2,  // FirmwareUpdateMd
+		0x72: 2,  // ManufacturerSpecific
+		0x73: 1,  // Powerlevel
+		0x98: 1,  // Security
+		0x84: 2,  // WakeUp
+		0x86: 1,  // Version
+	]
+}
+
+// Parse incoming device messages to generate events
+def parse(String description) {
+	def result = []
+	def cmd
+	if (description.startsWith("Err 106")) {
+		state.sec = 0
+		result = createEvent( name: "secureInclusion", value: "failed", eventType: "ALERT",
+				descriptionText: "This sensor failed to complete the network security key exchange. If you are unable to control it via SmartThings, you must remove it from your network and add it again.")
+	} else if (description.startsWith("Err")) {
+		result = createEvent(descriptionText: "$device.displayName $description", isStateChange: true)
+	} else {
+		cmd = zwave.parse(description, commandClassVersions)
+		if (cmd) {
+			result = zwaveEvent(cmd)
+		}
+	}
+
+	if (result instanceof List) {
+		result = result.flatten()
+	}
+
+	log.debug "Parsed '$description' to $result"
+	return result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
+	def encapsulatedCommand = cmd.encapsulatedCommand(commandClassVersions)
+	log.debug "encapsulated: $encapsulatedCommand"
+	if (encapsulatedCommand) {
+		state.sec = 1
+		return zwaveEvent(encapsulatedCommand)
+	} else {
+		log.warn "Unable to extract encapsulated cmd from $cmd"
+		return [createEvent(descriptionText: cmd.toString())]
+	}
+}
+
+def sensorValueEvent(value) {
+	if (value) {
+		createEvent(name: "contact", value: "open", descriptionText: "$device.displayName is open")
+	} else {
+		createEvent(name: "contact", value: "closed", descriptionText: "$device.displayName is closed")
+	}
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) {
+	return sensorValueEvent(cmd.value)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd) {
+	return sensorValueEvent(cmd.value)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.sensorbinaryv2.SensorBinaryReport cmd) {
+	return sensorValueEvent(cmd.sensorValue)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.sensoralarmv1.SensorAlarmReport cmd) {
+	return sensorValueEvent(cmd.sensorState)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cmd) {
+	def result = []
+	if (cmd.notificationType == 0x06 && cmd.event == 0x16) {
+		result << sensorValueEvent(1)
+	} else if (cmd.notificationType == 0x06 && cmd.event == 0x17) {
+		result << sensorValueEvent(0)
+	} else if (cmd.notificationType == 0x07) {
+		if (cmd.event == 0x00) {
+			if (cmd.eventParametersLength == 0 || cmd.eventParameter[0] != 3) {
+				result << createEvent(descriptionText: "$device.displayName covering replaced", isStateChange: true, displayed: false)
+			} else {
+				result << sensorValueEvent(0)
+			}
+		} else if (cmd.event == 0x01 || cmd.event == 0x02) {
+			result << sensorValueEvent(1)
+		} else if (cmd.event == 0x03) {
+			result << createEvent(descriptionText: "$device.displayName covering was removed", isStateChange: true)
+			if (!device.currentState("ManufacturerCode")) {
+				result << response(secure(zwave.manufacturerSpecificV2.manufacturerSpecificGet()))
+			}
+		} else if (cmd.event == 0x05 || cmd.event == 0x06) {
+			result << createEvent(descriptionText: "$device.displayName detected glass breakage", isStateChange: true)
+		} else {
+			result << createEvent(descriptionText: "$device.displayName event $cmd.event ${cmd.eventParameter.inspect()}", isStateChange: true, displayed: false)
+		}
+	} else if (cmd.notificationType) {
+		result << createEvent(descriptionText: "$device.displayName notification $cmd.notificationType event $cmd.event ${cmd.eventParameter.inspect()}", isStateChange: true, displayed: false)
+	} else {
+		def value = cmd.v1AlarmLevel == 255 ? "active" : cmd.v1AlarmLevel ?: "inactive"
+		result << createEvent(name: "alarm $cmd.v1AlarmType", value: value, isStateChange: true, displayed: false)
+	}
+	return result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd) {
+	def event = createEvent(name: "WakeUp", value: "wakeup", descriptionText: "${device.displayName} woke up", isStateChange: true, displayed: false)  // for Astralink
+	def cmds = []
+
+	if (!device.currentState("ManufacturerCode")) {
+		cmds << secure(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
+		cmds << "delay 2000"
+	}
+	if (!state.lastbat || now() - state.lastbat > 10*60*60*1000) {
+		event.descriptionText += ", requesting battery"
+		cmds << secure(zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType:1, scale:1))
+		cmds << "delay 800"
+		cmds << secure(zwave.batteryV1.batteryGet())
+		cmds << "delay 2000"
+	} else {
+		log.debug "not checking battery, was updated ${(now() - state.lastbat)/60000 as int} min ago"
+	}
+	cmds << secure(zwave.wakeUpV1.wakeUpNoMoreInformation())
+
+	return [event, response(cmds)]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
+	def map = [ name: "battery", unit: "%" ]
+	if (cmd.batteryLevel == 0xFF) {
+		map.value = 1
+		map.descriptionText = "${device.displayName} has a low battery"
+		map.isStateChange = true
+	} else {
+		map.value = cmd.batteryLevel
+	}
+	def event = createEvent(map)
+
+	// Save at least one battery report in events list every few days
+	if (!event.isStateChange && (now() - 3*24*60*60*1000) > device.latestState("battery")?.date?.time) {
+		map.isStateChange = true
+	}
+	state.lastbat = now()
+	return [event]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
+	def result = []
+	def manufacturerCode = String.format("%04X", cmd.manufacturerId)
+	def productTypeCode = String.format("%04X", cmd.productTypeId)
+	def productCode = String.format("%04X", cmd.productId)
+	def wirelessConfig = "ZWP"
+	log.debug "MSR ${manufacturerCode} ${productTypeCode} ${productCode}"
+
+	result << createEvent(name: "ManufacturerCode", value: manufacturerCode)
+	result << createEvent(name: "ProduceTypeCode", value: productTypeCode)
+	result << createEvent(name: "ProductCode", value: productCode)
+	result << createEvent(name: "WirelessConfig", value: wirelessConfig)
+
+	return result
+}
+
+def zwaveEvent(physicalgraph.zwave.Command cmd) {
+	return [createEvent(descriptionText: "$device.displayName: $cmd", displayed: false)]
+}
+
+private secure(physicalgraph.zwave.Command cmd) {
+	if (state.sec == 0) {  // default to secure
+		cmd.format()
+	} else {
+		zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
+	}
+}
+
+private secureSequence(commands, delay=200) {
+	delayBetween(commands.collect{ secure(it) }, delay)
+}

devicetypes/smartthings/zwave-plus-motion-temp-sensor.src/zwave-plus-motion-temp-sensor.groovy

@@ -0,0 +1,327 @@
+/**
+*	Copyright 2016 SmartThings
+*	Copyright 2015 AstraLink
+*
+*	Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+*	in compliance with the License. You may obtain a copy of the License at:
+*
+*		http://www.apache.org/licenses/LICENSE-2.0
+*
+*	Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+*	on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+*	for the specific language governing permissions and limitations under the License.
+*
+*	Z-Wave Plus Motion Sensor with Temperature Measurement, ZP3102*-5
+*
+*/
+
+metadata {
+	definition (name: "Z-Wave Plus Motion/Temp Sensor", namespace: "smartthings", author: "SmartThings") {
+		capability "Motion Sensor"
+		capability "Temperature Measurement"
+		capability "Configuration"
+		capability "Battery"
+		capability "Sensor"
+
+		// for Astralink
+		attribute "ManufacturerCode", "string"
+		attribute "ProduceTypeCode", "string"
+		attribute "ProductCode", "string"
+		attribute "WakeUp", "string"
+		attribute "WirelessConfig", "string"
+				
+		fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x98, 0x86, 0x72, 0x5A, 0x85, 0x59, 0x73, 0x80, 0x71, 0x31, 0x70, 0x84, 0x7A"
+		fingerprint type:"8C07", inClusters: "5E,98,86,72,5A,31,71"
+		fingerprint mfr:"0109", prod:"2002", model:"0205"  // not using deviceJoinName because it's sold under different brand names
+	}
+
+	tiles {
+		standardTile("motion", "device.motion", width: 3, height: 2) {
+			state "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0"
+			state "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff"
+		}
+
+		valueTile("temperature", "device.temperature", inactiveLabel: false) {
+			state "temperature", label:'${currentValue}°',
+				backgroundColors:[
+					[value: 31, color: "#153591"],
+					[value: 44, color: "#1e9cbb"],
+					[value: 59, color: "#90d2a7"],
+					[value: 74, color: "#44b621"],
+					[value: 84, color: "#f1d801"],
+					[value: 95, color: "#d04e00"],
+					[value: 96, color: "#bc2323"]
+				]
+		}
+		valueTile("battery", "device.battery", inactiveLabel: false, decoration: "flat") {
+			state "battery", label:'${currentValue}% battery', unit:"%"
+		}
+
+		main(["motion", "temperature"])
+		details(["motion", "temperature", "battery"])
+	}
+}
+
+def updated() {
+	if (!device.currentState("ManufacturerCode")) {
+		response(secure(zwave.manufacturerSpecificV2.manufacturerSpecificGet()))
+	}
+}
+
+def configure() {
+	log.debug "configure()"
+	def cmds = []
+
+	if (state.sec != 1) {
+		// secure inclusion may not be complete yet
+		cmds << "delay 1000"
+	}
+
+	cmds += secureSequence([
+		zwave.manufacturerSpecificV2.manufacturerSpecificGet(),
+		zwave.batteryV1.batteryGet(),
+		zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType:1, scale:1)
+	], 500)
+
+	cmds << "delay 8000"
+	cmds << secure(zwave.wakeUpV1.wakeUpNoMoreInformation())
+	return cmds
+}
+
+private getCommandClassVersions() {
+	[
+		0x71: 3,  // Notification
+		0x5E: 2,  // ZwaveplusInfo
+		0x59: 1,  // AssociationGrpInfo
+		0x85: 2,  // Association
+		0x20: 1,  // Basic
+		0x80: 1,  // Battery
+		0x70: 1,  // Configuration
+		0x5A: 1,  // DeviceResetLocally
+		0x7A: 2,  // FirmwareUpdateMd
+		0x72: 2,  // ManufacturerSpecific
+		0x73: 1,  // Powerlevel
+		0x98: 1,  // Security
+		0x31: 5,  // SensorMultilevel
+		0x84: 2	  // WakeUp
+	]
+}
+
+// Parse incoming device messages to generate events
+def parse(String description) {
+	def result = []
+	def cmd
+	if (description.startsWith("Err 106")) {
+		state.sec = 0
+		result = createEvent( name: "secureInclusion", value: "failed", eventType: "ALERT",
+				descriptionText: "This sensor failed to complete the network security key exchange. If you are unable to control it via SmartThings, you must remove it from your network and add it again.")
+	} else if (description.startsWith("Err")) {
+		result = createEvent(descriptionText: "$device.displayName $description", isStateChange: true)
+	} else {
+		cmd = zwave.parse(description, commandClassVersions)
+		if (cmd) {
+			result = zwaveEvent(cmd)
+		}
+	}
+
+	if (result instanceof List) {
+		result = result.flatten()
+	}
+
+	log.debug "Parsed '$description' to $result"
+	return result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.securityv1.SecurityMessageEncapsulation cmd) {
+	def encapsulatedCommand = cmd.encapsulatedCommand(commandClassVersions)
+	log.debug "encapsulated: $encapsulatedCommand"
+	if (encapsulatedCommand) {
+		state.sec = 1
+		return zwaveEvent(encapsulatedCommand)
+	} else {
+		log.warn "Unable to extract encapsulated cmd from $cmd"
+		return [createEvent(descriptionText: cmd.toString())]
+	}
+}
+
+def sensorValueEvent(value) {
+	def result = []
+	if (value) {
+		log.debug "sensorValueEvent($value) : active"
+		result << createEvent(name: "motion", value: "active", descriptionText: "$device.displayName detected motion")
+	} else {
+		log.debug "sensorValueEvent($value) : inactive"
+		result << createEvent(name: "motion", value: "inactive", descriptionText: "$device.displayName motion has stopped")
+	}
+	return result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) {
+	return sensorValueEvent(cmd.value)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicSet cmd) {
+	return sensorValueEvent(cmd.value)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.switchbinaryv1.SwitchBinaryReport cmd) {
+	return sensorValueEvent(cmd.value)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.sensorbinaryv2.SensorBinaryReport cmd) {
+	return sensorValueEvent(cmd.sensorValue)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.sensoralarmv1.SensorAlarmReport cmd) {
+	return sensorValueEvent(cmd.sensorState)
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cmd) {
+	def result = []
+	if (cmd.notificationType == 0x07) {
+		if (cmd.event == 0x01 || cmd.event == 0x02) {
+			result << sensorValueEvent(1)
+		} else if (cmd.event == 0x03) {
+			result << createEvent(descriptionText: "$device.displayName covering was removed", isStateChange: true)
+			result << response(secure(zwave.manufacturerSpecificV2.manufacturerSpecificGet()))
+		} else if (cmd.event == 0x05 || cmd.event == 0x06) {
+			result << createEvent(descriptionText: "$device.displayName detected glass breakage", isStateChange: true)
+		} else if (cmd.event == 0x07) {
+			result << sensorValueEvent(1)
+		} else if (cmd.event == 0x08) {
+			result << sensorValueEvent(1)
+		} else if (cmd.event == 0x00) {
+			if (cmd.eventParametersLength && cmd.eventParameter[0] == 3) {
+				result << createEvent(descriptionText: "$device.displayName covering replaced", isStateChange: true, displayed: false)
+			} else {
+				result << sensorValueEvent(0)
+			}
+		} else if (cmd.event == 0xFF) {
+			result << sensorValueEvent(1)
+		} else {
+			result << createEvent(descriptionText: "$device.displayName sent event $cmd.event")
+		}
+	} else if (cmd.notificationType) {
+		def text = "Notification $cmd.notificationType: event ${([cmd.event] + cmd.eventParameter).join(", ")}"
+		result << createEvent(name: "notification$cmd.notificationType", value: "$cmd.event", descriptionText: text, displayed: false)
+	} else {
+		def value = cmd.v1AlarmLevel == 255 ? "active" : cmd.v1AlarmLevel ?: "inactive"
+		result << createEvent(name: "alarm $cmd.v1AlarmType", value: value, displayed: false)
+	}
+	return result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.wakeupv2.WakeUpNotification cmd) {
+	def event = createEvent(name: "WakeUp", value: "wakeup", descriptionText: "${device.displayName} woke up", isStateChange: true, displayed: false)  // for Astralink
+	def cmds = []
+
+	if (!device.currentState("ManufacturerCode")) {
+		cmds << secure(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
+		cmds << "delay 2000"
+	}
+	if (!state.lastbat || now() - state.lastbat > 10*60*60*1000) {
+		event.descriptionText += ", requesting battery"
+		cmds << secure(zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType:1, scale:1))
+		cmds << "delay 800"
+		cmds << secure(zwave.batteryV1.batteryGet())
+		cmds << "delay 2000"
+	} else {
+		log.debug "not checking battery, was updated ${(now() - state.lastbat)/60000 as int} min ago"
+	}
+	cmds << secure(zwave.wakeUpV1.wakeUpNoMoreInformation())
+
+	return [event, response(cmds)]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd) {
+	def result = []
+	def map = [ name: "battery", unit: "%" ]
+	if (cmd.batteryLevel == 0xFF) {
+		map.value = 1
+		map.descriptionText = "${device.displayName} has a low battery"
+		map.isStateChange = true
+	} else {
+		map.value = cmd.batteryLevel
+	}
+	def event = createEvent(map)
+
+	// Save at least one battery report in events list every few days
+	if (!event.isStateChange && (now() - 3*24*60*60*1000) > device.latestState("battery")?.date?.time) {
+		map.isStateChange = true
+	}
+	state.lastbat = now()
+	return [event]
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv5.SensorMultilevelReport cmd) {
+	def result = []
+	def map = [:]
+	switch (cmd.sensorType) {
+		case 1:
+			def cmdScale = cmd.scale == 1 ? "F" : "C"
+			map.name = "temperature"
+			map.value = convertTemperatureIfNeeded(cmd.scaledSensorValue, cmdScale, cmd.precision)
+			map.unit = getTemperatureScale()
+			break;
+		case 3:
+			map.name = "illuminance"
+			map.value = cmd.scaledSensorValue.toInteger().toString()
+			map.unit = "lux"
+			break;
+		case 5:
+			map.name = "humidity"
+			map.value = cmd.scaledSensorValue.toInteger().toString()
+			map.unit = cmd.scale == 0 ? "%" : ""
+			break;
+		case 0x1E:
+			map.name = "loudness"
+			map.unit = cmd.scale == 1 ? "dBA" : "dB"
+			map.value = cmd.scaledSensorValue.toString()
+			break;
+		default:
+			map.descriptionText = cmd.toString()
+	}
+	result << createEvent(map)
+	return result
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.manufacturerspecificv2.ManufacturerSpecificReport cmd) {
+	def result = []
+	def manufacturerCode = String.format("%04X", cmd.manufacturerId)
+	def productTypeCode = String.format("%04X", cmd.productTypeId)
+	def productCode = String.format("%04X", cmd.productId)
+	def wirelessConfig = "ZWP"
+	log.debug "MSR ${manufacturerCode} ${productTypeCode} ${productCode}"
+	
+	result << createEvent(name: "ManufacturerCode", value: manufacturerCode)
+	result << createEvent(name: "ProduceTypeCode", value: productTypeCode)
+	result << createEvent(name: "ProductCode", value: productCode)
+	result << createEvent(name: "WirelessConfig", value: wirelessConfig)
+
+	if (manufacturerCode == "0109" && productTypeCode == "2002") {
+		result << response(secureSequence([
+			// Change re-trigger duration to 1 minute
+			zwave.configurationV1.configurationSet(parameterNumber: 1, configurationValue: [1], size: 1),
+			zwave.batteryV1.batteryGet(),
+			zwave.sensorMultilevelV5.sensorMultilevelGet(sensorType:1, scale:1)
+		], 400))
+	}
+
+	return result
+}
+
+def zwaveEvent(physicalgraph.zwave.Command cmd) {
+	return [createEvent(descriptionText: "$device.displayName: $cmd", displayed: false)]
+}
+
+private secure(physicalgraph.zwave.Command cmd) {
+	if (state.sec == 0) {  // default to secure
+		cmd.format()
+	} else {
+		zwave.securityV1.securityMessageEncapsulation().encapsulate(cmd).format()
+	}
+}
+
+private secureSequence(commands, delay=200) {
+	delayBetween(commands.collect{ secure(it) }, delay)
+}

smartapps/ddspivey/smart-family-presence.src/smart-family-presence.groovy

@@ -0,0 +1,251 @@
+/**
+ *  Smart Family Presence
+ *
+ *  Copyright 2016 Darin Spivey
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+definition(
+    name: "Smart Family Presence",
+    namespace: "ddspivey",
+    author: "Darin Spivey",
+    description: "Smart arrival and departure push messages for couples/families that are traveling together.  When family members arrive and depart together, there is no need to send an individual push alert for each.",
+    category: "Family",
+    iconUrl: "http://cdn.device-icons.smartthings.com/Home/home4-icn@2x.png",
+    iconX2Url: "http://cdn.device-icons.smartthings.com/Home/home4-icn@2x.png",
+    iconX3Url: "http://cdn.device-icons.smartthings.com/Home/home4-icn@2x.png")
+
+
+preferences {
+	section("Family Members") {
+		input "familySensors", "capability.presenceSensor", required: true, title: "Who's in your family?", multiple: true
+	}
+    section("Threshold") {
+    	paragraph "Set the time in seconds to allow for group arrival/departure"
+    	input "timeThreshold", "text", required: false, title: "Default is ${defaultThreshold}."
+    }
+	section("Smart departure alerts") {
+    	paragraph "When family members are home together, departure push alerts may not be necessary because most of the time, people are aware when their family members are leaving.  This feature will only send a push alert if the the entire family was previously apart."
+		paragraph "For example, when my wife and I are home together, I know when she's leaving; I don't need an alert for that.  If this feature is off, it will send a departure alert when she leaves."
+        input("smartDepartureFeature", "enum", title: "Default is On.", default:"On", options: ["On","Off"])
+	}
+    section("Verbose logging") {
+    	paragraph "For debugging, you may log all the app's decisions to the notifications log."
+    	input("logToNotifications", "enum", title: "Default is No.", default:"No", options: ["Yes", "No" ])
+	}
+}
+
+/****************************
+	Auto-getters and setters
+*****************************/
+
+def getDefaultThreshold() {
+	60
+}
+
+def setInProgress(value) {
+	state.inProgress = value
+}
+
+def getInProgress() {
+	state.inProgress == true
+}
+
+def getSmartDeparture() {
+	settings.smartDepartureFeature == 'On'
+}
+
+def getLogToNotifications() {
+	settings.logToNotifications == 'Yes'
+}
+
+def getThreshold() {
+	settings.timeThreshold ? settings.timeThreshold.toInteger() : defaultThreshold
+}
+
+/****************************
+ Framework methods
+*****************************/
+
+def installed() {
+	initialize()
+}
+ 
+def logit(msg) {
+	log.debug msg
+    if (logToNotifications) {
+    	sendNotificationEvent("[Smart Family Presense] $msg")
+    }
+}
+
+def updated() {
+	unsubscribe()
+	initialize()
+}
+
+def initialize() {
+    subscribe(familySensors, "presence", presenceHandler)
+    log.debug("Subscribed ${familySensors.toString()} to presenceHandler")
+
+	/*
+    	Regular usage shows that, during certain cases such as the hub going offline,
+        or power outages, the app may lose state and not send alerts.  This will ensure that
+        it re-evaluates its state at least once per hour.
+    */
+    
+	logit "Scheduling a re-calibration at the top of every hour."
+    schedule("0 0 0/1 1/1 * ? *", reset)
+	reset()
+}
+
+/*****************************
+ Smart Family Presence methods
+******************************/
+
+def reset() {
+	if (inProgress) {
+    	logit "Skipping re-calibration, execution in progress!"
+        return
+    }    
+    logit "Re-calibrating."
+    state.baseCase = null
+    state.changedThisTime = []
+    wasApart()
+}
+
+def isFamilyTogether() {
+	// Check to see if the entire family has arrived/departed together
+
+	if (state.changedThisTime.size() == 0) {
+    	logit "No changes."
+        reset()
+    	return
+	}
+    
+	logit "People who changed presence: ${state.changedThisTime}"
+
+	def theirState = state.baseCase
+  	def notTogether = statusNotEquals(theirState)
+    
+  	if (notTogether) {
+    	// The family is not together, send an alert as normal
+        
+    	logit "${notTogether.join(", ")} is not with the rest of the family (who are $theirState)"
+        sendPushAlert()
+    }
+    else {
+    	/* 
+        	Special case - When everyone is gone, but they *previously* weren't together,
+        	then technically they were apart to begin with and are still apart upon leaving
+        */
+            
+        if (state.wasApart && theirState == 'not present') {
+           	logit "Family was previously apart and now all gone.  Alert."
+        	sendPushAlert()
+        }
+        else {    
+    		logit "OK!  Everyone has arrived/departed together.  The family is $theirState"
+        }
+    }
+    inProgress = false
+    reset()
+}
+
+def wasApart() {
+	// This is true if everyone is gone, or some were home
+	def allGone = statusEquals('not present') == familySensors
+    def someHome = statusEquals('present') != familySensors
+    if (allGone || someHome) {
+    	state.wasApart = true
+    }
+    else {
+    	state.wasApart = false
+    }
+}
+
+
+def presenceHandler(evt) {
+    def person = evt.displayName
+
+	logit "Presence Event: $person is $evt.value"
+    
+	if (! inProgress) {
+    	inProgress = true
+    	state.baseCase = evt.value
+        logit "First person sensed.  Checking for others to be $evt.value in ${threshold} seconds"
+        runIn(threshold, isFamilyTogether, [overwrite: false])
+	}
+    
+	if (! state.changedThisTime.contains(person)) {    
+    	state.changedThisTime.push person
+    }
+    else {
+    	// Special case - presence has changed within the threshold.  Remove this person.
+        state.changedThisTime = state.changedThisTime - person
+		logit "Ignoring flapping presence event for $person"
+    }
+}
+
+def statusEquals(status) {
+	if (status == null) return
+    
+	familySensors.findAll {
+        it.currentPresence == status
+    }
+}
+
+def statusNotEquals(status) {
+	if (status == null) return
+      
+	familySensors.findAll {
+        it.currentPresence != status 
+    }
+}
+
+def sendPushAlert() {
+	def baseCase = state.baseCase
+    def changedPeople = state.changedThisTime
+    
+    if (baseCase == 'not present' && state.wasApart == false && smartDeparture) {
+      logit "Not sending departure alert because smartDeparture is $smartDeparture"
+        return
+    }
+    
+	def statuses = [ 'present':[], 'not present':[] ]
+
+	for (sensor in familySensors) {
+    	def person = sensor.toString()       
+        if (changedPeople.contains(person)) {
+        	def currentState = sensor.currentPresence
+        	log.debug "$person is now $currentState"
+            statuses[currentState].push person
+        } 
+	}
+    logit "Statuses: $statuses"
+    
+    // Construct the message payload
+    
+    def pushMsg = ""    
+    def home = statuses.present
+    def notHome = statuses['not present']
+ 	String adVerb;
+   
+    if (home.size() > 0) {
+    	adVerb = home.size > 1 ? "have" : "has"
+    	pushMsg += "${home.join(", ")} $adVerb arrived $location.name. "
+    }
+    if (notHome.size() > 0) {
+    	adVerb = notHome.size > 1 ? "have" : "has"
+    	pushMsg += "${notHome.join(", ")} $adVerb left $location.name"
+    }    	
+    
+    sendPush pushMsg
+}

smartapps/dianoga/netatmo-connect.src/netatmo-connect.groovy

@@ -337,10 +337,10 @@ def initialize() {
 
 	settings.devices.each {
 		def deviceId = it
-		def detail = state.deviceDetail[deviceId]
+		def detail = state?.deviceDetail[deviceId]
 
 		try {
-			switch(detail.type) {
+			switch(detail?.type) {
 				case 'NAMain':
 					log.debug "Base station"
 					createChildDevice("Netatmo Basestation", deviceId, "${detail.type}.${deviceId}", detail.module_name)
@@ -487,12 +487,12 @@ def poll() {
     log.debug "State: ${state.deviceState}"
 
 	settings.devices.each { deviceId ->
-		def detail = state.deviceDetail[deviceId]
-		def data = state.deviceState[deviceId]
-		def child = children.find { it.deviceNetworkId == deviceId }
+		def detail = state?.deviceDetail[deviceId]
+		def data = state?.deviceState[deviceId]
+		def child = children?.find { it.deviceNetworkId == deviceId }
 
 		log.debug "Update: $child";
-		switch(detail.type) {
+		switch(detail?.type) {
 			case 'NAMain':
 				log.debug "Updating NAMain $data"
 				child?.sendEvent(name: 'temperature', value: cToPref(data['Temperature']) as float, unit: getTemperatureScale())

smartapps/smartthings/gentle-wake-up.src/gentle-wake-up.groovy

@@ -39,6 +39,7 @@ preferences {
 	page(name: "completionPage")
 	page(name: "numbersPage")
 	page(name: "controllerExplanationPage")
+	page(name: "unsupportedDevicesPage")
 }
 
 def rootPage() {
@@ -47,6 +48,9 @@ def rootPage() {
 		section("What to dim") {
 			input(name: "dimmers", type: "capability.switchLevel", title: "Dimmers", description: null, multiple: true, required: true, submitOnChange: true)
 			if (dimmers) {
+				if (dimmersContainUnsupportedDevices()) {
+					href(name: "toUnsupportedDevicesPage", page: "unsupportedDevicesPage", title: "Some of your selected dimmers don't seem to be supported", description: "Tap here to fix it", required: true)
+				}
 				href(name: "toNumbersPage", page: "numbersPage", title: "Duration & Direction", description: numbersPageHrefDescription(), state: "complete")
 			}
 		}
@@ -71,6 +75,31 @@ def rootPage() {
 	}
 }
 
+def unsupportedDevicesPage() {
+
+	def unsupportedDimmers = dimmers.findAll { !hasSetLevelCommand(it) }
+
+	dynamicPage(name: "unsupportedDevicesPage") {
+		if (unsupportedDimmers) {
+			section("These devices do not support the setLevel command") {
+				unsupportedDimmers.each {
+					paragraph deviceLabel(it)
+				}
+			}
+			section {
+				input(name: "dimmers", type: "capability.sensor", title: "Please remove the above devices from this list.", submitOnChange: true, multiple: true)
+			}
+			section {
+				paragraph "If you think there is a mistake here, please contact support."
+			}
+		} else {
+			section {
+				paragraph "You're all set. You can hit the back button, now. Thanks for cleaning up your settings :)"
+			}
+		}
+	}
+}
+
 def controllerExplanationPage() {
 	dynamicPage(name: "controllerExplanationPage", title: "How To Control Gentle Wake Up") {
 
@@ -528,14 +557,16 @@ def updateDimmers(percentComplete) {
 		} else {
 
 			def shouldChangeColors = (colorize && colorize != "false")
-			def canChangeColors = hasSetColorCommand(dimmer)
 
-			log.debug "Setting ${deviceLabel(dimmer)} to ${nextLevel}"
-
-			if (shouldChangeColors && canChangeColors) {
-				dimmer.setColor([hue: getHue(dimmer, nextLevel), saturation: 100, level: nextLevel])
-			} else {
+			if (shouldChangeColors && hasSetColorCommand(dimmer)) {
+				def hue = getHue(dimmer, nextLevel)
+				log.debug "Setting ${deviceLabel(dimmer)} level to ${nextLevel} and hue to ${hue}"
+				dimmer.setColor([hue: hue, saturation: 100, level: nextLevel])
+			} else if (hasSetLevelCommand(dimmer)) {
+				log.debug "Setting ${deviceLabel(dimmer)} level to ${nextLevel}"
 				dimmer.setLevel(nextLevel)
+			} else {
+				log.warn "${deviceLabel(dimmer)} does not have setColor or setLevel commands."
 			}
 
 		}
@@ -817,24 +848,21 @@ private getRedHue(level) {
 	if (level >= 96) return 17
 }
 
+private dimmersContainUnsupportedDevices() {
+	def found = dimmers.find { hasSetLevelCommand(it) == false }
+	return found != null
+}
+
 private hasSetLevelCommand(device) {
-	def isDimmer = false
-	device.supportedCommands.each {
-		if (it.name.contains("setLevel")) {
-			isDimmer = true
-		}
-	}
-	return isDimmer
+	return hasCommand(device, "setLevel")
 }
 
 private hasSetColorCommand(device) {
-	def hasColor = false
-	device.supportedCommands.each {
-		if (it.name.contains("setColor")) {
-			hasColor = true
-		}
-	}
-	return hasColor
+	return hasCommand(device, "setColor")
+}
+
+private hasCommand(device, String command) {
+	return (device.supportedCommands.find { it.name == command } != null)
 }
 
 private dimmersWithSetColorCommand() {
@@ -1073,4 +1101,4 @@ def hasStartLevel() {
 
 def hasEndLevel() {
 	return (endLevel != null && endLevel != "")
-}
+}

smartapps/smartthings/logitech-harmony-connect.src/logitech-harmony-connect.groovy

@@ -658,29 +658,73 @@ def updateDevice() {
 	def data = request.JSON
 	def command = data.command
 	def arguments = data.arguments
-
 	log.debug "updateDevice, params: ${params}, request: ${data}"
 	if (!command) {
 		render status: 400, data: '{"msg": "command is required"}'
 	} else {
 		def device = allDevices.find { it.id == params.id }
-		if (device) {
-        	if (device.hasCommand("$command")) {
-                if (arguments) {
-                    device."$command"(*arguments)
-                } else {
-                    device."$command"()
-                }
-                render status: 204, data: "{}"
-           	} else {
-				render status: 404, data: '{"msg": "Command not supported by this Device"}'
-			}
-		} else {
-			render status: 404, data: '{"msg": "Device not found"}'
-		}
+    if (device) {
+        if (validateCommand(device, command)) {
+            if (arguments) {
+                device."$command"(*arguments)
+            } else {
+                device."$command"()
+            }
+            render status: 204, data: "{}"
+        } else {
+          render status: 403, data: '{"msg": "Access denied. This command is not supported by current capability."}'
+        }
+    } else {
+      render status: 404, data: '{"msg": "Device not found"}'
+    }
+  }
+}
+
+/**
+ * Validating the command passed by the user based on capability.
+ * @return boolean
+ */
+def validateCommand(device, command) {
+	def capabilityCommands = getDeviceCapabilityCommands(device.capabilities)
+	def currentDeviceCapability = getCapabilityName(device)
+	if (currentDeviceCapability != "" && capabilityCommands[currentDeviceCapability]) {
+    return (command in capabilityCommands[currentDeviceCapability] || (currentDeviceCapability == "Switch" && command == "setLevel" && device.hasCommand("setLevel"))) ? true : false
+	} else {
+		// Handling other device types here, which don't accept commands
+		httpError(400, "Bad request.")
 	}
 }
 
+/**
+ * Need to get the attribute name to do the lookup. Only
+ * doing it for the device types which accept commands
+ * @return attribute name of the device type
+ */
+def getCapabilityName(device) {
+    def capName = ""
+    if (switches.find{it.id == device.id})
+			capName = "Switch"
+		else if (alarms.find{it.id == device.id})
+			capName = "Alarm"
+		else if (locks.find{it.id == device.id})
+			capName = "Lock"
+    log.trace "Device: $device - Capability Name: $capName"
+		return capName
+}
+
+/**
+ * Constructing the map over here of
+ * supported commands by device capability
+ * @return a map of device capability -> supported commands
+ */
+def getDeviceCapabilityCommands(deviceCapabilities) {
+	def map = [:]
+	deviceCapabilities.collect {
+		map[it.name] = it.commands.collect{ it.name.toString() }
+	}
+	return map
+}
+
 def listSubscriptions() {
 	log.debug "listSubscriptions()"
 	app.subscriptions?.findAll { it.device?.device && it.device.id }?.collect {
@@ -779,18 +823,33 @@ def deviceHandler(evt) {
 }
 
 def sendToHarmony(evt, String callbackUrl) {
-	def callback = new URI(callbackUrl)
-	def host = callback.port != -1 ? "${callback.host}:${callback.port}" : callback.host
-	def path = callback.query ? "${callback.path}?${callback.query}".toString() : callback.path
-	sendHubCommand(new physicalgraph.device.HubAction(
-		method: "POST",
-		path: path,
-		headers: [
-			"Host": host,
-			"Content-Type": "application/json"
-		],
-		body: [evt: [deviceId: evt.deviceId, name: evt.name, value: evt.value]]
-	))
+  def callback = new URI(callbackUrl)
+  if (callback.port != -1) {
+  	def host = callback.port != -1 ? "${callback.host}:${callback.port}" : callback.host
+  	def path = callback.query ? "${callback.path}?${callback.query}".toString() : callback.path
+  	sendHubCommand(new physicalgraph.device.HubAction(
+  		method: "POST",
+  		path: path,
+  		headers: [
+  			"Host": host,
+  			"Content-Type": "application/json"
+  		],
+  		body: [evt: [deviceId: evt.deviceId, name: evt.name, value: evt.value]]
+  	))
+  } else {
+    def params = [
+      uri: callbackUrl,
+      body: [evt: [deviceId: evt.deviceId, name: evt.name, value: evt.value]]
+    ]
+    try {
+        log.debug "Sending data to Harmony Cloud: $params"
+        httpPostJson(params) { resp ->
+            log.debug "Harmony Cloud - Response: ${resp.status}"
+        }
+    } catch (e) {
+        log.error "Harmony Cloud - Something went wrong: $e"
+    }
+  }
 }
 
 def listHubs() {

smartapps/vlaminck/alfred-workflow.src/alfred-workflow.groovy

@@ -92,22 +92,87 @@ void updateLock() {
 
 private void updateAll(devices) {
 	def command = request.JSON?.command
-	if (command) {
-		devices."$command"()
+	def type = params.param1
+	if (!devices) {
+		httpError(404, "Devices not found")
+	}
+	
+	if (command){
+		devices.each { device ->
+			executeCommand(device, type, command)
+		}
 	}
 }
 
 private void update(devices) {
 	log.debug "update, request: ${request.JSON}, params: ${params}, devices: $devices.id"
 	def command = request.JSON?.command
-	if (command) {
-		def device = devices.find { it.id == params.id }
-		if (!device) {
-			httpError(404, "Device not found")
-		} else {
-			device."$command"()
-		}
+	def type = params.param1
+	def device = devices?.find { it.id == params.id }
+
+	if (!device) {
+		httpError(404, "Device not found")
 	}
+
+	if (command) {
+		executeCommand(device, type, command)
+	}
+}
+
+/**
+ * Validating the command passed by the user based on capability.
+ * @return boolean
+ */
+def validateCommand(device, deviceType, command) {
+	def capabilityCommands = getDeviceCapabilityCommands(device.capabilities)
+	def currentDeviceCapability = getCapabilityName(deviceType)
+	if (capabilityCommands[currentDeviceCapability]) {
+		return command in capabilityCommands[currentDeviceCapability] ? true : false
+	} else {
+		// Handling other device types here, which don't accept commands
+		httpError(400, "Bad request.")
+	}
+}
+
+/**
+ * Need to get the attribute name to do the lookup. Only
+ * doing it for the device types which accept commands
+ * @return attribute name of the device type
+ */
+def getCapabilityName(type) {
+    switch(type) {
+		case "switches":
+			return "Switch"
+		case "locks":
+			return "Lock"
+		default:
+			return type
+	}
+}
+
+/**
+ * Constructing the map over here of
+ * supported commands by device capability
+ * @return a map of device capability -> supported commands
+ */
+def getDeviceCapabilityCommands(deviceCapabilities) {
+	def map = [:]
+	deviceCapabilities.collect {
+		map[it.name] = it.commands.collect{ it.name.toString() }
+	}
+	return map
+}
+
+/**
+ * Validates and executes the command
+ * on the device or devices
+ */
+def executeCommand(device, type, command) {
+	if (validateCommand(device, type, command)) {
+		device."$command"()
+	} else {
+		httpError(403, "Access denied. This command is not supported by current capability.")
+	}	
 }
 
 private show(devices, name) {