MSA-687: I'm resubmitting the EZMultipli for publication as requested.

I originally submitted this back in April.
The device type works so lets get it published for everyone to use!
Thanks,
Eric

devicetypes/drzwave/ezmultipli.src/ezmultipli.groovy

@@ -0,0 +1,294 @@
+// Express Controls EZMultiPli Multi-sensor 
+// Motion Sensor - Temperature - Light level - 8 Color Indicator LED - Z-Wave Range Extender - Wall Powered
+// driver for SmartThings
+// The EZMultiPli is also known as the HSM200 from HomeSeer.com
+//
+// v0.1.0 - DrZWave - chose better icons, Got color LED to work - first fully functional version
+// v0.0.9 - jrs - got the temp and luminance to work. Motion works. Debugging the color wheel.
+// v0.0.8 - DrZWave 2/25/2015 - change the color control to be tiles since there are only 8 colors.
+// v0.0.7 - jrs - 02/23/2015 - Jim Sulin
+
+metadata {
+	definition (name: "EZmultiPli", namespace: "DrZWave", author: "Eric Ryherd", oauth: true) {
+	capability "Motion Sensor"
+	capability "Temperature Measurement"
+	capability "Illuminance Measurement"
+	capability "Switch"
+	capability "Color Control"
+	capability "Configuration"
+    command "setColor"
+
+	fingerprint deviceId: "0x0701", inClusters: "0x5E, 0x71, 0x31, 0x33, 0x72, 0x86, 0x59, 0x85, 0x70, 0x77, 0x5A, 0x7A, 0x73, 0xEF, 0x20" 
+	} // end definition
+
+	simulator {
+		// messages the device returns in response to commands it receives
+		status "motion"     : "command: 7105000000FF07, payload: 07"
+		status "no motion"  : "command: 7105000000FF07, payload: 00"
+
+		for (int i = 0; i <= 100; i += 20) {
+			status "temperature ${i}F": new physicalgraph.zwave.Zwave().sensorMultilevelV5.sensorMultilevelReport(
+				scaledSensorValue: i, precision: 1, sensorType: 1, scale: 1).incomingMessage()
+		}
+		for (int i = 0; i <= 100; i += 20) {
+			status "luminance ${i} %": new physicalgraph.zwave.Zwave().sensorMultilevelV5.sensorMultilevelReport(
+				scaledSensorValue: i, precision: 0, sensorType: 3).incomingMessage()
+		}
+
+		controlTile("rgbSelector", "device.color", "color", height: 3, width: 3, inactiveLabel: false) {
+		            state "color", action:"setColor"
+	    }
+
+	} //end simulator
+
+	tiles {
+		standardTile("motion", "device.motion", width: 2, height: 2, canChangeIcon: true, canChangeBackground: true) {
+			state "active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0"
+			state "inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff"
+		}
+		standardTile("switch", "device.switch", canChangeIcon: true) {
+			state "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
+			state "off", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
+			state "turningOn", label:'${name}', icon:"st.switches.light.on", backgroundColor:"#79b821"
+			state "turningOff", label:'${name}', icon:"st.switches.light.off", backgroundColor:"#ffffff"
+		}
+		valueTile("temperature", "device.temperature") {
+			state "temperature", label:'${currentValue}°', unit:"F", icon:"st.Weather.weather2", // would be better if the units would switch to the desired units of the system (imperial or metric)
+			backgroundColors:[
+				[value: 0,  color: "#1010ff"], // blue=cold
+				[value: 65, color: "#a0a0f0"],
+				[value: 70, color: "#e0e050"],
+				[value: 75, color: "#f0d030"], // yellow
+				[value: 80, color: "#fbf020"],
+				[value: 85, color: "#fbdc01"],
+				[value: 90, color: "#fb3a01"],
+				[value: 95, color: "#fb0801"]  // red=hot
+			]
+		} // icons to use would be st.Weather.weather2 or st.alarm.temperature.normal - see http://scripts.3dgo.net/smartthings/icons/ for a list of icons
+		valueTile("illuminance", "device.illuminance", inactiveLabel: false) {
+// jrs 4/7/2015 - Null on display
+//			state "luminosity", label:'${currentValue} ${unit}'
+			state "luminosity", label:'${currentValue}%', unit:"%", icon:"st.illuminance.illuminance.bright",
+			backgroundColors:[
+				[value: 25, color: "#404040"],
+				[value: 50, color: "#808080"],
+				[value: 75, color: "#a0a0a0"],
+				[value: 90, color: "#e0e0e0"]
+			]
+		}
+// jrs 4/7/2015 
+		controlTile("rgbSelector", "device.color", "color", height: 1, width: 1) {
+			state "color", action:"color control.setColor"
+		}
+
+		standardTile("configure", "device.configure", inactiveLabel: false, decoration: "flat") {
+			state "configure", label:'', action:"configuration.configure", icon:"st.secondary.configure"
+		}
+
+		main ("motion")
+		details(["motion", "temperature", "illuminance", "configure", "switch", "rgbSelector"])
+	}  // end tiles
+    
+	preferences {
+    	input "OnTime",  "number", title: "No Motion Interval", description: "N minutes lights stay on after no motion detected [0, 1-127]", defaultValue: 10, displayDuringSetup: true, required: false
+        input "OnLevel", "number", title: "Dimmer Onlevel", description: "Dimmer OnLevel for associated node 2 lights [0, 1-99, -1]", defaultValue: -1, displayDuringSetup: true, required: false
+        input "LiteMin", "number", title: "Luminance Report Frequency", description: "Luminance report sent every N minutes", defaultValue: 60, displayDuringSetup: true, required: false
+        input "TempMin", "number", title: "Temperature Report Frequency", description: "Temperature report sent every N minutes", defaultValue: 60, displayDuringSetup: true, required: false
+        input "TempAdj", "number", title: "Temperature Calibration", description: "Adjust temperature up/down N tenths of a degree F [(-127)-(+128)]", defaultValue: 0, displayDuringSetup: true, required: false
+  }
+
+} // end metadata
+
+
+// Parse incoming device messages from device to generate events
+def parse(String description){
+	def result = []
+	def cmd = zwave.parse(description, [0x31: 5]) // 0x31=SensorMultilevel which we force to be version 5
+	if (cmd) {
+		result << createEvent(zwaveEvent(cmd))
+	}
+	log.debug "Parse returned ${result}"
+	return result
+}
+
+
+// Event Generation
+def zwaveEvent(physicalgraph.zwave.commands.sensormultilevelv5.SensorMultilevelReport cmd){
+	def map = [:]
+	switch (cmd.sensorType) {
+		case 0x01:				// SENSOR_TYPE_TEMPERATURE_VERSION_1
+			def cmdScale = cmd.scale == 1 ? "F" : "C"
+			map.value = convertTemperatureIfNeeded(cmd.scaledSensorValue, cmdScale, cmd.precision)
+			map.unit = getTemperatureScale()
+			map.name = "temperature"
+			log.debug "Temperature report"
+			break;
+		case 0x03 :				// SENSOR_TYPE_LUMINANCE_VERSION_1
+			map.value = cmd.scaledSensorValue.toInteger().toString()
+			map.unit = "%"
+			map.name = "illuminance"
+			log.debug "Luminance report"
+			break;
+	}
+	return map
+}
+
+
+def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cmd) {
+	def map = [:]
+	if (cmd.notificationType==0x07) {	// NOTIFICATION_TYPE_BURGLAR
+    		if (cmd.event==0x07 || cmd.event==0x08) {
+			map.name = "motion"
+            	map.value = "active"
+			map.descriptionText = "$device.displayName motion detected"
+            	log.debug "motion recognized"
+		} else if (cmd.event==0) {
+			map.name = "motion"
+            	map.value = "inactive"
+			map.descriptionText = "$device.displayName no motion detected"
+            	log.debug "No motion recognized"
+    		}
+	} 
+	if (map.name != "motion") {
+    		log.debug "unmatched parameters for cmd: ${cmd.toString()}}"
+	}
+	return map
+}
+
+def zwaveEvent(physicalgraph.zwave.commands.basicv1.BasicReport cmd) {
+    [name: "switch", value: cmd.value ? "on" : "off", type: "digital"]
+}
+
+
+def on() {
+	log.debug "Turning Light 'on'"
+	delayBetween([
+		zwave.basicV1.basicSet(value: 0xFF).format(),
+		zwave.basicV1.basicGet().format()
+	], 500)
+}
+
+def off() {
+	log.debug "Turning Light 'off'"
+	delayBetween([
+		zwave.basicV1.basicSet(value: 0x00).format(),
+		zwave.basicV1.basicGet().format()
+	], 500)
+}
+
+
+def setColor(value) {
+    log.debug "setColor() : ${value} and red value is= ${value.red}"
+    def cmds = []
+    def myred=value.red >128 ? 255 : 0	// the EZMultiPli has just on/off for each of the 3 channels RGB so convert the 0-255 value into 0 or 255.
+    def mygreen=value.green >128 ? 255 : 0
+    def myblue=value.blue>128 ? 255 : 0
+//			 cmds << zwave.colorControlV1.stateSet(stateDataLength: 3, VariantGroup1: [0x02, myred], VariantGroup2:[ 0x03, mygreen], VariantGroup3:[0x04,myblue]).format() // ST support for this command as of 2015/02/23 does not support the color IDs so this command cannot be used.
+// So instead we'll use these commands to hack around the lack of support of the above command
+	cmds << zwave.basicV1.basicSet(value: 0x00).format() // As of 2015/02/23 ST is not supporting stateSet properly but found this hack that works. 
+	if (myred!=0) {
+       	cmds << zwave.colorControlV1.startCapabilityLevelChange(capabilityId: 0x02, startState: myred, ignoreStartState: True, updown: True).format()
+		cmds << zwave.colorControlV1.stopStateChange(capabilityId: 0x02).format()
+    }
+    if (mygreen!=0) {
+	 	cmds << zwave.colorControlV1.startCapabilityLevelChange(capabilityId: 0x03, startState: mygreen, ignoreStartState: True, updown: True).format()
+	 	cmds << zwave.colorControlV1.stopStateChange(capabilityId: 0x03).format()
+    }
+    if (myblue!=0) {
+		cmds << zwave.colorControlV1.startCapabilityLevelChange(capabilityId: 0x04, startState: myblue, ignoreStartState: True, updown: True).format()
+		cmds << zwave.colorControlV1.stopStateChange(capabilityId: 0x04).format()
+    }
+    delayBetween(cmds, 100)
+}
+
+def zwaveEvent(physicalgraph.zwave.Command cmd) {
+	// Handles all Z-Wave commands we aren't interested in
+	[:]
+}
+
+// ensure we are passing acceptable param values for LiteMin & TempMin configs
+def checkLiteTempInput(value) {
+	if (value == null) {
+    	value=60
+    }
+    def liteTempVal = value.toInteger()
+    switch (liteTempVal) {
+      case { it < 0 }:
+        return 60			// bad value, set to default
+        break
+      case { it > 127 }:
+        return 127			// bad value, greater then MAX, set to MAX
+        break
+      default:
+        return liteTempVal	// acceptable value
+    }
+}
+
+// ensure we are passing acceptable param value for OnTime config
+def checkOnTimeInput(value) {
+	if (value == null) {
+    	value=10
+    }
+    def onTimeVal = value.toInteger()
+    switch (onTimeVal) {
+      case { it < 0 }:
+        return 10			// bad value set to default
+        break
+      case { it > 127 }:
+        return 127			// bad value, greater then MAX, set to MAX
+        break
+      default:
+        return onTimeVal	// acceptable value
+    }
+}
+
+// ensure we are passing acceptable param value for OnLevel config
+def checkOnLevelInput(value) {
+	if (value == null) {
+    	value=99
+    }  
+    def onLevelVal = value.toInteger()
+    switch (onLevelVal) {
+      case { it < -1 }:
+        return -1			// bad value set to default
+        break
+      case { it > 99 }:
+        return 99			// bad value, greater then MAX, set to MAX
+        break
+      default:
+        return onLevelVal	// acceptable value
+    }
+}
+
+
+// ensure we are passing an acceptable param value for TempAdj configs
+def checkTempAdjInput(value) {
+	if (value == null) {
+    	value=0
+    }
+	def tempAdjVal = value.toInteger()
+    switch (tempAdjVal) {
+      case { it < -127 }:
+        return 0			// bad value, set to default
+        break
+      case { it > 128 }:
+        return 128			// bad value, greater then MAX, set to MAX
+        break
+      default:
+        return tempAdjVal	// acceptable value
+    }
+}
+
+
+def configure() {
+	log.debug "OnTime=${settings.OnTime} OnLevel=${settings.OnLevel}"
+	def cmd = delayBetween([
+		zwave.configurationV1.configurationSet(parameterNumber: 1, size: 1, configurationValue: [checkOnTimeInput(settings.OnTime)]).format(),
+		zwave.configurationV1.configurationSet(parameterNumber: 2, size: 1, configurationValue: [checkOnLevelInput(settings.OnLevel)]).format(),
+		zwave.configurationV1.configurationSet(parameterNumber: 3, size: 1, configurationValue: [checkLiteTempInput(settings.LiteMin)]).format(),
+		zwave.configurationV1.configurationSet(parameterNumber: 4, size: 1, configurationValue: [checkLiteTempInput(settings.TempMin)]).format(),
+		zwave.configurationV1.configurationSet(parameterNumber: 5, size: 1, configurationValue: [checkTempAdjInput(settings.TempAdj)]).format()
+	], 100)
+	log.debug cmd
+	cmd
+}