MSA-958: This module controls light bulbs along with door open/close sensors. If a light bulb is already on when a door opens, it stays on. Else, it will switch off after specified interval.

build.gradle

@@ -52,9 +52,6 @@ hipchatShareFile {
 hipchatSendNotification {
     String branch = project.hasProperty('branch') ? project.property('branch') : 'unknown'
     message = "Began executable deploy of SmartThingsPublic(${branch})."
-    if (branch == 'master') {
-      message += ' (dev shards)'
-    }
     color = branch == 'master' ? 'yellow' : 'red'
     notify = true
 }

devicetypes/smartthings/ecobee-thermostat.src/ecobee-thermostat.groovy

@@ -379,16 +379,12 @@ def getDataByName(String name) {
 	state[name] ?: device.getDataValue(name)
 }
 
-def setThermostatMode(String mode) {
+def setThermostatMode(String value) {
-	log.debug "setThermostatMode($mode)"
+	log.debug "setThermostatMode({$value})"
-	mode = mode.toLowerCase()
-	switchToMode(mode)
 }
 
-def setThermostatFanMode(String mode) {
+def setThermostatFanMode(String value) {
-	log.debug "setThermostatFanMode($mode)"
+	log.debug "setThermostatFanMode({$value})"
-	mode = mode.toLowerCase()
-	switchToFanMode(mode)
 }
 
 def generateModeEvent(mode) {

devicetypes/smartthings/hue-bridge.src/hue-bridge.groovy

@@ -17,13 +17,16 @@ metadata {
 
 	tiles(scale: 2) {
      	multiAttributeTile(name:"rich-control"){
-			tileAttribute ("", key: "PRIMARY_CONTROL") {
+			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
 	            attributeState "default", label: "Hue Bridge", action: "", icon: "st.Lighting.light99-hue", backgroundColor: "#F3C200"
 			}    
 	        tileAttribute ("serialNumber", key: "SECONDARY_CONTROL") {
 	            attributeState "default", label:'SN: ${currentValue}'
 			}    
         }    
+		standardTile("icon", "icon", width: 1, height: 1, canChangeIcon: false, inactiveLabel: true, canChangeBackground: false) {
+			state "default", label: "Hue Bridge", action: "", icon: "st.Lighting.light99-hue", backgroundColor: "#FFFFFF"
+		}
 		valueTile("serialNumber", "device.serialNumber", decoration: "flat", height: 1, width: 2, inactiveLabel: false) {
 			state "default", label:'SN: ${currentValue}'
 		}
@@ -31,7 +34,7 @@ metadata {
 			state "default", label:'${currentValue}', height: 1, width: 2, inactiveLabel: false
 		}
 
-		main (["rich-control"])
+		main (["icon"])
 		details(["rich-control", "networkAddress"])
 	}
 }
@@ -72,7 +75,6 @@ def parse(description) {
 				}
 				else if (contentType?.contains("xml")) {
 					log.debug "HUE BRIDGE ALREADY PRESENT"
-                    parent.hubVerification(device.hub.id, msg.body)
 				}
 			}
 		}

devicetypes/smartthings/hue-bulb.src/hue-bulb.groovy

@@ -3,7 +3,6 @@
  *
  *  Author: SmartThings
  */
-
 // for the UI
 metadata {
 	// Automatically generated. Make future change here.
@@ -28,10 +27,10 @@ metadata {
 	tiles (scale: 2){
 		multiAttributeTile(name:"rich-control", type: "lighting", width: 6, height: 4, canChangeIcon: true){
 			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#00A0DC", nextState:"turningOff"
+				attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
-				attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#C6C7CC", nextState:"turningOn"
+				attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#00A0DC", nextState:"turningOff"
+				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
-				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#C6C7CC", nextState:"turningOn"
+				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
 			}
 			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
 				attributeState "level", action:"switch level.setLevel", range:"(0..100)"
@@ -44,10 +43,16 @@ metadata {
 			}
 		}
 
+		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
+			state "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+			state "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+			state "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+			state "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+		}
+
         controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2000..6500)") {
             state "colorTemperature", action:"color temperature.setColorTemperature"
         }
-
         valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
             state "colorTemperature", label: '${currentValue} K'
         }
@@ -55,12 +60,29 @@ metadata {
 		standardTile("reset", "device.reset", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
 			state "default", label:"Reset Color", action:"reset", icon:"st.lights.philips.hue-single"
 		}
-
+		standardTile("refresh", "device.switch", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
-		standardTile("refresh", "device.refresh", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
 			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
+		controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 2, inactiveLabel: false, range:"(0..100)") {
+			state "level", action:"switch level.setLevel"
+		}
+		valueTile("level", "device.level", inactiveLabel: false, decoration: "flat") {
+			state "level", label: 'Level ${currentValue}%'
+		}
+		controlTile("saturationSliderControl", "device.saturation", "slider", height: 1, width: 2, inactiveLabel: false) {
+			state "saturation", action:"color control.setSaturation"
+		}
+		valueTile("saturation", "device.saturation", inactiveLabel: false, decoration: "flat") {
+			state "saturation", label: 'Sat ${currentValue}    '
+		}
+		controlTile("hueSliderControl", "device.hue", "slider", height: 1, width: 2, inactiveLabel: false) {
+			state "hue", action:"color control.setHue"
+		}
+		valueTile("hue", "device.hue", inactiveLabel: false, decoration: "flat") {
+			state "hue", label: 'Hue ${currentValue}   '
+		}
 
-		main(["rich-control"])
+		main(["switch"])
 		details(["rich-control", "colorTempSliderControl", "colorTemp", "reset", "refresh"])
 	}
 }
@@ -103,104 +125,62 @@ void nextLevel() {
 }
 
 void setLevel(percent) {
-    log.debug "Executing 'setLevel'"
+	log.debug "Executing 'setLevel'"
-    if (verifyPercent(percent)) {
+	parent.setLevel(this, percent)
-        parent.setLevel(this, percent)
+	sendEvent(name: "level", value: percent)
-        sendEvent(name: "level", value: percent, descriptionText: "Level has changed to ${percent}%")
-        sendEvent(name: "switch", value: "on")
-    }
 }
 
 void setSaturation(percent) {
-    log.debug "Executing 'setSaturation'"
+	log.debug "Executing 'setSaturation'"
-    if (verifyPercent(percent)) {
+	parent.setSaturation(this, percent)
-        parent.setSaturation(this, percent)
+	sendEvent(name: "saturation", value: percent)
-        sendEvent(name: "saturation", value: percent, displayed: false)
-    }
 }
 
 void setHue(percent) {
-    log.debug "Executing 'setHue'"
+	log.debug "Executing 'setHue'"
-    if (verifyPercent(percent)) {
+	parent.setHue(this, percent)
-        parent.setHue(this, percent)
+	sendEvent(name: "hue", value: percent)
-        sendEvent(name: "hue", value: percent, displayed: false)
-    }
 }
 
 void setColor(value) {
-    log.debug "setColor: ${value}, $this"
+	log.debug "setColor: ${value}, $this"
-    def events = []
+	parent.setColor(this, value)
-    def validValues = [:]
+	if (value.hue) { sendEvent(name: "hue", value: value.hue)}
-
+	if (value.saturation) { sendEvent(name: "saturation", value: value.saturation)}
-    if (verifyPercent(value.hue)) {
+	if (value.hex) { sendEvent(name: "color", value: value.hex)}
-        events << createEvent(name: "hue", value: value.hue, displayed: false)
+	if (value.level) { sendEvent(name: "level", value: value.level)}
-        validValues.hue = value.hue
+	if (value.switch) { sendEvent(name: "switch", value: value.switch)}
-    }
-    if (verifyPercent(value.saturation)) {
-        events << createEvent(name: "saturation", value: value.saturation, displayed: false)
-        validValues.saturation = value.saturation
-    }
-    if (value.hex != null) {
-        if (value.hex ==~ /^\#([A-Fa-f0-9]){6}$/) {
-            events << createEvent(name: "color", value: value.hex)
-            validValues.hex = value.hex
-        } else {
-            log.warn "$value.hex is not a valid color"
-        }
-    }
-    if (verifyPercent(value.level)) {
-        events << createEvent(name: "level", value: value.level, descriptionText: "Level has changed to ${value.level}%")
-        validValues.level = value.level
-    }
-    if (value.switch == "off" || (value.level != null && value.level <= 0)) {
-        events << createEvent(name: "switch", value: "off")
-        validValues.switch = "off"
-    } else {
-        events << createEvent(name: "switch", value: "on")
-        validValues.switch = "on"
-    }
-    if (!events.isEmpty()) {
-        parent.setColor(this, validValues)
-    }
-    events.each {
-        sendEvent(it)
-    }
 }
 
 void reset() {
-    log.debug "Executing 'reset'"
+	log.debug "Executing 'reset'"
-    def value = [level:100, saturation:56, hue:23]
+    def value = [level:100, hex:"#90C638", saturation:56, hue:23]
     setAdjustedColor(value)
-    parent.poll()
+	parent.poll()
 }
 
 void setAdjustedColor(value) {
-    if (value) {
+	if (value) {
         log.trace "setAdjustedColor: ${value}"
         def adjusted = value + [:]
         adjusted.hue = adjustOutgoingHue(value.hue)
         // Needed because color picker always sends 100
         adjusted.level = null
         setColor(adjusted)
-    } else {
-        log.warn "Invalid color input"
     }
 }
 
 void setColorTemperature(value) {
-    if (value) {
+	if (value) {
         log.trace "setColorTemperature: ${value}k"
         parent.setColorTemperature(this, value)
         sendEvent(name: "colorTemperature", value: value)
-        sendEvent(name: "switch", value: "on")
+	}
-    } else {
-        log.warn "Invalid color temperature"
-    }
 }
 
 void refresh() {
-    log.debug "Executing 'refresh'"
+	log.debug "Executing 'refresh'"
-    parent.manualRefresh()
+	parent.manualRefresh()
 }
 
 def adjustOutgoingHue(percent) {
@@ -219,14 +199,3 @@ def adjustOutgoingHue(percent) {
 	log.info "percent: $percent, adjusted: $adjusted"
 	adjusted
 }
-
-def verifyPercent(percent) {
-    if (percent == null)
-        return false
-    else if (percent >= 0 && percent <= 100) {
-        return true
-    } else {
-        log.warn "$percent is not 0-100"
-        return false
-    }
-}

devicetypes/smartthings/hue-lux-bulb.src/hue-lux-bulb.groovy

@@ -36,6 +36,13 @@ metadata {
 			}
         }
 
+		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
+			state "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+			state "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+			state "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+			state "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+        }
+
         controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 2, inactiveLabel: false, range:"(0..100)") {
             state "level", action:"switch level.setLevel"
         }
@@ -44,7 +51,7 @@ metadata {
             state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
         }
 
-        main(["rich-control"])
+        main(["switch"])
         details(["rich-control", "refresh"])
     }
 }
@@ -79,12 +86,8 @@ void off() {
 
 void setLevel(percent) {
 	log.debug "Executing 'setLevel'"
-    if (percent != null && percent >= 0 && percent <= 100) {
+	parent.setLevel(this, percent)
-		parent.setLevel(this, percent)
+	sendEvent(name: "level", value: percent)
-		sendEvent(name: "level", value: percent)
-	} else {
-    	log.warn "$percent is not 0-100"
-    }
 }
 
 void refresh() {

devicetypes/smartthings/smartpower-outlet.src/i18n/messages.properties

@@ -23,7 +23,6 @@
 # Korean (ko)
 # Device Preferences
 '''Give your device a name'''.ko=기기 이름 바꾸기
-'''Outlet'''.ko=플러그
 # Events descriptionText
 '''{{ device.displayName }} is On'''.ko={{ device.displayName }}켜졌습니다.
 '''{{ device.displayName }} is Off'''.ko={{ device.displayName }}꺼졌습니다.

devicetypes/smartthings/smartpower-outlet.src/smartpower-outlet.groovy

@@ -22,6 +22,7 @@
  *  1. 20160117 TW - Update/Edit to support i18n translations
 ===============================================================================
  */
+
 metadata {
 	// Automatically generated. Make future change here.
 	definition (name: "SmartPower Outlet", namespace: "smartthings", author: "SmartThings") {
@@ -103,8 +104,8 @@ def parse(String description) {
 			log.info "$device updates: ${finalResult.value}"
 		}
 		else if (finalResult.type == "power") {
-			def powerValue = (finalResult.value as Integer)/10
+			def value = (finalResult.value as Integer)/10
-			sendEvent(name: "power", value: powerValue, descriptionText: '{{ device.displayName }} power is {{ value }} Watts', translatable: true )
+			createEvent(name: "power", value: value, descriptionText: '{{ device.displayName }} power is {{ value }} Watts', translatable: true )
 			/*
 				Dividing by 10 as the Divisor is 10000 and unit is kW for the device. AttrId: 0302 and 0300. Simplifying to 10
 				power level is an integer. The exact power level with correct units needs to be handled in the device type
@@ -112,8 +113,10 @@ def parse(String description) {
 			*/
 		}
 		else {
-			def descriptionText = finalResult.value == "on" ? '{{ device.displayName }} is On' : '{{ device.displayName }} is Off'
+        	if ( finalResult.value == "on" )
-			sendEvent(name: finalResult.type, value: finalResult.value, descriptionText: descriptionText, translatable: true)
+				createEvent(name: finalResult.type, value: finalResult.value, descriptionText: '{{ device.displayName }} is On', translatable: true)
+            else
+            	createEvent(name: finalResult.type, value: finalResult.value, descriptionText: '{{ device.displayName }} is Off', translatable: true)
 		}
 	}
 	else {

devicetypes/smartthings/smartsense-moisture-sensor.src/i18n/messages.properties

@@ -30,12 +30,11 @@
 '''Degrees'''.ko=온도
 '''Adjust temperature by this many degrees'''.ko=몇 도씩 온도를 조절하십시오
 '''Give your device a name'''.ko=기기 이름 바꾸기
-'''Water Leak Sensor'''.ko=누수센서
 # Events descriptionText
 '''{{ device.displayName }} is dry'''.ko={{ device.displayName }}가 건조
 '''{{ device.displayName }} is wet'''.ko={{ device.displayName }}누수
 '''{{ device.displayName }} was {{ value }}°C'''.ko={{ device.displayName }}이(가) {{ value }}°C였습니다
 '''{{ device.displayName }} was {{ value }}°F'''.ko={{ device.displayName }}이(가) {{ value }}°F였습니다
 '''{{ device.displayName }} battery has too much power: (> 3.5) volts.'''.ko={{ device.displayName }} 배터리 전력이 너무 높습니다(3.5볼트 초과).
-'''{{ device.displayName }} battery was {{ value }}%'''.ko={{ device.displayName }}남아있는 배터리는 {{ value }}%입니다.
+'''{{ device.displayName }} battery was {{ value }}'''.ko={{ device.displayName }}남아있는 배터리는 {{ value }}입니다.
 #==============================================================================

devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy

@@ -32,8 +32,7 @@ metadata {
 		capability "Temperature Measurement"
 		capability "Water Sensor"
         
-		command "enrollResponse"
+        command "enrollResponse"
-
 
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3315-S", deviceJoinName: "Water Leak Sensor"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3315"
@@ -67,7 +66,7 @@ metadata {
 			}
 		}
 		valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
-			state "temperature", label:'${currentValue}°',
+			state "temperature", label:'${currentValue}°',
 				backgroundColors:[
 					[value: 31, color: "#153591"],
 					[value: 44, color: "#1e9cbb"],
@@ -103,29 +102,29 @@ def parse(String description) {
 	else if (description?.startsWith('temperature: ')) {
 		map = parseCustomMessage(description)
 	}
-	else if (description?.startsWith('zone status')) {
+    else if (description?.startsWith('zone status')) {
-		map = parseIasMessage(description)
+	    map = parseIasMessage(description)
-	}
+    }
  
 	log.debug "Parse returned $map"
 	def result = map ? createEvent(map) : null
     
-	if (description?.startsWith('enroll request')) {
+    if (description?.startsWith('enroll request')) {
-		List cmds = enrollResponse()
+    	List cmds = enrollResponse()
-		log.debug "enroll response: ${cmds}"
+        log.debug "enroll response: ${cmds}"
-		result = cmds?.collect { new physicalgraph.device.HubAction(it) }
+        result = cmds?.collect { new physicalgraph.device.HubAction(it) }
-	}
+    }
-	return result
+    return result
 }
  
 private Map parseCatchAllMessage(String description) {
-	Map resultMap = [:]
+    Map resultMap = [:]
-	def cluster = zigbee.parse(description)
+    def cluster = zigbee.parse(description)
-	if (shouldProcessMessage(cluster)) {
+    if (shouldProcessMessage(cluster)) {
-		switch(cluster.clusterId) {
+        switch(cluster.clusterId) {
-			case 0x0001:
+            case 0x0001:
-				resultMap = getBatteryResult(cluster.data.last())
+            	resultMap = getBatteryResult(cluster.data.last())
-				break
+                break
 
             case 0x0402:
                 // temp is last 2 data values. reverse to swap endian
@@ -140,13 +139,13 @@ private Map parseCatchAllMessage(String description) {
 }
 
 private boolean shouldProcessMessage(cluster) {
-	// 0x0B is default response indicating message got through
+    // 0x0B is default response indicating message got through
-	// 0x07 is bind message
+    // 0x07 is bind message
-	boolean ignoredMessage = cluster.profileId != 0x0104 ||
+    boolean ignoredMessage = cluster.profileId != 0x0104 || 
-		cluster.command == 0x0B ||
+        cluster.command == 0x0B ||
-		cluster.command == 0x07 ||
+        cluster.command == 0x07 ||
-		(cluster.data.size() > 0 && cluster.data.first() == 0x3e)
+        (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
-	return !ignoredMessage
+    return !ignoredMessage
 }
  
 private Map parseReportAttributeMessage(String description) {
@@ -178,42 +177,42 @@ private Map parseCustomMessage(String description) {
 }
 
 private Map parseIasMessage(String description) {
-	List parsedMsg = description.split(' ')
+    List parsedMsg = description.split(' ')
-	String msgCode = parsedMsg[2]
+    String msgCode = parsedMsg[2]
     
-	Map resultMap = [:]
+    Map resultMap = [:]
-	switch(msgCode) {
+    switch(msgCode) {
-		case '0x0020': // Closed/No Motion/Dry
+        case '0x0020': // Closed/No Motion/Dry
-			resultMap = getMoistureResult('dry')
+        	resultMap = getMoistureResult('dry')
-			break
+            break
 
-		case '0x0021': // Open/Motion/Wet
+        case '0x0021': // Open/Motion/Wet
-			resultMap = getMoistureResult('wet')
+        	resultMap = getMoistureResult('wet')
-			break
+            break
 
-		case '0x0022': // Tamper Alarm
+        case '0x0022': // Tamper Alarm
-			break
+            break
 
-		case '0x0023': // Battery Alarm
+        case '0x0023': // Battery Alarm
-			break
+            break
 
-		case '0x0024': // Supervision Report
+        case '0x0024': // Supervision Report
-			 log.debug 'dry with tamper alarm'
+        	 log.debug 'dry with tamper alarm'
-			resultMap = getMoistureResult('dry')
+        	resultMap = getMoistureResult('dry')
-			break
+            break
 
-		case '0x0025': // Restore Report
+        case '0x0025': // Restore Report
-			log.debug 'water with tamper alarm'
+        	log.debug 'water with tamper alarm'
-			resultMap = getMoistureResult('wet')
+        	resultMap = getMoistureResult('wet')
-			break
+            break
 
-		case '0x0026': // Trouble/Failure
+        case '0x0026': // Trouble/Failure
-			break
+            break
 
-		case '0x0028': // Test Mode
+        case '0x0028': // Test Mode
-			break
+            break
-	}
+    }
-	return resultMap
+    return resultMap
 }
 
 def getTemperature(value) {
@@ -257,7 +256,8 @@ private Map getBatteryResult(rawValue) {
 				def pct = batteryMap[volts]
 				if (pct != null) {
 					result.value = pct
-					result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
+                    def value = pct
+					result.descriptionText = "{{ device.displayName }} battery was {{ value }}"
 				}
 			}
 			else {
@@ -265,14 +265,13 @@ private Map getBatteryResult(rawValue) {
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
 				result.value = Math.min(100, (int) pct * 100)
-				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
+				result.descriptionText = "{{ device.displayName }} battery was {{ value }}"
 			}
 		}
 	}
 
 	return result
 }
-
 private Map getTemperatureResult(value) {
 	log.debug 'TEMP'
 	if (tempOffset) {
@@ -282,9 +281,9 @@ private Map getTemperatureResult(value) {
 	}
     def descriptionText
     if ( temperatureScale == 'C' )
-    	descriptionText = '{{ device.displayName }} was {{ value }}°C'
+    	descriptionText = '{{ device.displayName }} was {{ value }}°C'
     else
-    	descriptionText = '{{ device.displayName }} was {{ value }}°F'
+    	descriptionText = '{{ device.displayName }} was {{ value }}°F'
 
 	return [
 		name: 'temperature',
@@ -312,7 +311,7 @@ private Map getMoistureResult(value) {
 def refresh() {
 	log.debug "Refreshing Temperature and Battery"
 	def refreshCmds = [
-		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
+        "st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
 		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200"
 	]
 
@@ -328,26 +327,26 @@ def configure() {
 
 		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 500",
 		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}",		//checkin time 6 hrs
-		"send 0x${device.deviceNetworkId} 1 1", "delay 500",
+        "send 0x${device.deviceNetworkId} 1 1", "delay 500",
 
 		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x402 {${device.zigbeeId}} {}", "delay 500",
-		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}",
+        "zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}",
-		"send 0x${device.deviceNetworkId} 1 1", "delay 500"
+        "send 0x${device.deviceNetworkId} 1 1", "delay 500"
 	]
-	return configCmds + refresh() // send refresh cmds as part of config
+    return configCmds + refresh() // send refresh cmds as part of config
 }
 
 def enrollResponse() {
 	log.debug "Sending enroll response"
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
-	[
+    [
 		//Resending the CIE in case the enroll request is sent before CIE is written
 		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 		//Enroll Response
 		"raw 0x500 {01 23 00 00 00}",
 		"send 0x${device.deviceNetworkId} 1 1", "delay 200"
-	]
+    ]
 }
 
 private getEndpointId() {
@@ -359,19 +358,19 @@ private hex(value) {
 }
 
 private String swapEndianHex(String hex) {
-	reverseArray(hex.decodeHex()).encodeHex()
+    reverseArray(hex.decodeHex()).encodeHex()
 }
 
 private byte[] reverseArray(byte[] array) {
-	int i = 0;
+    int i = 0;
-	int j = array.length - 1;
+    int j = array.length - 1;
-	byte tmp;
+    byte tmp;
-	while (j > i) {
+    while (j > i) {
-		tmp = array[j];
+        tmp = array[j];
-		array[j] = array[i];
+        array[j] = array[i];
-		array[i] = tmp;
+        array[i] = tmp;
-		j--;
+        j--;
-		i++;
+        i++;
-	}
+    }
-	return array
+    return array
 }

devicetypes/smartthings/smartsense-motion-sensor.src/i18n/messages.properties

@@ -29,12 +29,11 @@
 '''Degrees'''.ko=온도
 '''Adjust temperature by this many degrees'''.ko=몇 도씩 온도를 조절하십시오
 '''Give your device a name'''.ko=기기 이름 바꾸기
-'''Motion Sensor'''.ko=모션 센서
 # Events descriptionText
 '''{{ device.displayName }} detected motion'''.ko={{ device.displayName }} 가 움직임을 감지하였습니다.
 '''{{ device.displayName }} motion has stopped'''.ko={{ device.displayName }}움직임이 중단되었습니다
 '''{{ device.displayName }} was {{ value }}°C'''.ko={{ device.displayName }}이(가){{ value }}°C였습니다.
 '''{{ device.displayName }} was {{ value }}°F'''.ko={{ device.displayName }}이(가) {{ value }}°F였습니다
 '''{{ device.displayName }} battery has too much power: (> 3.5) volts.'''.ko={{ device.displayName }} 배터리 전력이 너무 높습니다(3.5볼트 초과).
-'''{{ device.displayName }} battery was {{ value }}%'''.ko={{ device.displayName }}남아있는 배터리는 {{ value }}%입니다.
+'''{{ device.displayName }} battery was {{ value }}'''.ko={{ device.displayName }}남아있는 배터리는 {{ value }}입니다.
 #==============================================================================

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -29,18 +29,17 @@ metadata {
 		capability "Motion Sensor"
 		capability "Configuration"
 		capability "Battery"
-		capability "Temperature Measurement"
+        capability "Temperature Measurement"
 		capability "Refresh"
         
-		command "enrollResponse"
+        command "enrollResponse"
 
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3305-S"
-		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3325-S", deviceJoinName: "Motion Sensor"
+        fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3325-S", deviceJoinName: "Motion Sensor"
-		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3305"
+        fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3305"
-		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3325"
+        fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3325"
-		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3326"
+        fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3326"
-		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3326-L", deviceJoinName: "Iris Motion Sensor"
+        fingerprint inClusters: "0000,0001,0003,000F,0020,0402,0500", outClusters: "0019", manufacturer: "SmartThings", model: "motionv4", deviceJoinName: "Motion Sensor"
-		fingerprint inClusters: "0000,0001,0003,000F,0020,0402,0500", outClusters: "0019", manufacturer: "SmartThings", model: "motionv4", deviceJoinName: "Motion Sensor"
 	}
 
 	simulator {
@@ -107,55 +106,55 @@ def parse(String description) {
 	else if (description?.startsWith('temperature: ')) {
 		map = parseCustomMessage(description)
 	}
-	else if (description?.startsWith('zone status')) {
+    else if (description?.startsWith('zone status')) {
-		map = parseIasMessage(description)
+	    map = parseIasMessage(description)
-	}
+    }
  
 	log.debug "Parse returned $map"
 	def result = map ? createEvent(map) : null
     
-	if (description?.startsWith('enroll request')) {
+    if (description?.startsWith('enroll request')) {
-		List cmds = enrollResponse()
+    	List cmds = enrollResponse()
-		log.debug "enroll response: ${cmds}"
+        log.debug "enroll response: ${cmds}"
-		result = cmds?.collect { new physicalgraph.device.HubAction(it) }
+        result = cmds?.collect { new physicalgraph.device.HubAction(it) }
-	}
+    }
-	return result
+    return result
 }
 
 private Map parseCatchAllMessage(String description) {
-	Map resultMap = [:]
+    Map resultMap = [:]
-	def cluster = zigbee.parse(description)
+    def cluster = zigbee.parse(description)
-	if (shouldProcessMessage(cluster)) {
+    if (shouldProcessMessage(cluster)) {
-		switch(cluster.clusterId) {
+        switch(cluster.clusterId) {
-			case 0x0001:
+            case 0x0001:
-				resultMap = getBatteryResult(cluster.data.last())
+            	resultMap = getBatteryResult(cluster.data.last())
-				break
+                break
 
-			case 0x0402:
+            case 0x0402:
-				// temp is last 2 data values. reverse to swap endian
+                // temp is last 2 data values. reverse to swap endian
-				String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+                String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
-				def value = getTemperature(temp)
+                def value = getTemperature(temp)
-				resultMap = getTemperatureResult(value)
+                resultMap = getTemperatureResult(value)
-				break
+                break
 
 			case 0x0406:
-				log.debug 'motion'
+            	log.debug 'motion'
-				resultMap.name = 'motion'
+                resultMap.name = 'motion'
-				break
+                break
-		}
+        }
-	}
+    }
 
-	return resultMap
+    return resultMap
 }
 
 private boolean shouldProcessMessage(cluster) {
-	// 0x0B is default response indicating message got through
+    // 0x0B is default response indicating message got through
-	// 0x07 is bind message
+    // 0x07 is bind message
-	boolean ignoredMessage = cluster.profileId != 0x0104 ||
+    boolean ignoredMessage = cluster.profileId != 0x0104 || 
-		cluster.command == 0x0B ||
+        cluster.command == 0x0B ||
-		cluster.command == 0x07 ||
+        cluster.command == 0x07 ||
-		(cluster.data.size() > 0 && cluster.data.first() == 0x3e)
+        (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
-	return !ignoredMessage
+    return !ignoredMessage
 }
 
 private Map parseReportAttributeMessage(String description) {
@@ -173,10 +172,10 @@ private Map parseReportAttributeMessage(String description) {
 	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
 		resultMap = getBatteryResult(Integer.parseInt(descMap.value, 16))
 	}
-	else if (descMap.cluster == "0406" && descMap.attrId == "0000") {
+    else if (descMap.cluster == "0406" && descMap.attrId == "0000") {
-		def value = descMap.value.endsWith("01") ? "active" : "inactive"
+    	def value = descMap.value.endsWith("01") ? "active" : "inactive"
-		resultMap = getMotionResult(value)
+    	resultMap = getMotionResult(value)
-	}
+    } 
  
 	return resultMap
 }
@@ -191,44 +190,44 @@ private Map parseCustomMessage(String description) {
 }
 
 private Map parseIasMessage(String description) {
-	List parsedMsg = description.split(' ')
+    List parsedMsg = description.split(' ')
-	String msgCode = parsedMsg[2]
+    String msgCode = parsedMsg[2]
     
-	Map resultMap = [:]
+    Map resultMap = [:]
-	switch(msgCode) {
+    switch(msgCode) {
-		case '0x0020': // Closed/No Motion/Dry
+        case '0x0020': // Closed/No Motion/Dry
-			resultMap = getMotionResult('inactive')
+        	resultMap = getMotionResult('inactive')
-			break
+            break
 
-		case '0x0021': // Open/Motion/Wet
+        case '0x0021': // Open/Motion/Wet
-			resultMap = getMotionResult('active')
+        	resultMap = getMotionResult('active')
-			break
+            break
 
-		case '0x0022': // Tamper Alarm
+        case '0x0022': // Tamper Alarm
-			log.debug 'motion with tamper alarm'
+        	log.debug 'motion with tamper alarm'
-			resultMap = getMotionResult('active')
+        	resultMap = getMotionResult('active')
-			break
+            break
 
-		case '0x0023': // Battery Alarm
+        case '0x0023': // Battery Alarm
-			break
+            break
 
-		case '0x0024': // Supervision Report
+        case '0x0024': // Supervision Report
-			log.debug 'no motion with tamper alarm'
+        	log.debug 'no motion with tamper alarm'
-			resultMap = getMotionResult('inactive')
+        	resultMap = getMotionResult('inactive')
-			break
+            break
 
-		case '0x0025': // Restore Report
+        case '0x0025': // Restore Report
-			break
+            break
 
-		case '0x0026': // Trouble/Failure
+        case '0x0026': // Trouble/Failure
-			log.debug 'motion with failure alarm'
+        	log.debug 'motion with failure alarm'
-			resultMap = getMotionResult('active')
+        	resultMap = getMotionResult('active')
-			break
+            break
 
-		case '0x0028': // Test Mode
+        case '0x0028': // Test Mode
-			break
+            break
-	}
+    }
-	return resultMap
+    return resultMap
 }
 
 def getTemperature(value) {
@@ -273,7 +272,7 @@ private Map getBatteryResult(rawValue) {
 				if (pct != null) {
 					result.value = pct
                     def value = pct
-					result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
+					result.descriptionText = "{{ device.displayName }} battery was {{ value }}"
 				}
 			}
 			else {
@@ -281,7 +280,7 @@ private Map getBatteryResult(rawValue) {
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
 				result.value = Math.min(100, (int) pct * 100)
-				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
+				result.descriptionText = "{{ device.displayName }} battery was {{ value }}"
 			}
 		}
 	}
@@ -313,6 +312,7 @@ private Map getTemperatureResult(value) {
 private Map getMotionResult(value) {
 	log.debug 'motion'
 	String descriptionText = value == 'active' ? "{{ device.displayName }} detected motion" : "{{ device.displayName }} motion has stopped"
+    //String descriptionText = '{{ device.displayName }} is {{ value | translate }}'
 	return [
 		name: 'motion',
 		value: value,
@@ -322,7 +322,7 @@ private Map getMotionResult(value) {
 }
 
 def refresh() {
-	log.debug "refresh called"
+	log.debug "refresh executed"
 	def refreshCmds = [
 		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
 		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200"
@@ -372,19 +372,19 @@ private hex(value) {
 }
 
 private String swapEndianHex(String hex) {
-	reverseArray(hex.decodeHex()).encodeHex()
+    reverseArray(hex.decodeHex()).encodeHex()
 }
 
 private byte[] reverseArray(byte[] array) {
-	int i = 0;
+    int i = 0;
-	int j = array.length - 1;
+    int j = array.length - 1;
-	byte tmp;
+    byte tmp;
-	while (j > i) {
+    while (j > i) {
-		tmp = array[j];
+        tmp = array[j];
-		array[j] = array[i];
+        array[j] = array[i];
-		array[i] = tmp;
+        array[i] = tmp;
-		j--;
+        j--;
-		i++;
+        i++;
-	}
+    }
-	return array
+    return array
 }

devicetypes/smartthings/smartsense-multi-sensor.src/i18n/messages.properties

@@ -32,7 +32,6 @@
 '''Do you want to use this sensor on a garage door?'''.ko=차고 문의 센서 사용 설정하기
 '''Tap to set'''.ko=눌러서 설정
 '''Give your device a name'''.ko=기기 이름 바꾸기
-'''Multipurpose Sensor'''.ko=멀티 센서
 # Events descriptionText
 '''{{ device.displayName }} was opened'''.ko={{ device.displayName }}열림을 감지하였습니다.
 '''{{ device.displayName }} was closed'''.ko={{ device.displayName }}닫혔습니다.
@@ -40,6 +39,8 @@
 '''{{ device.displayName }} was inactive'''.ko={{ device.displayName }}비활성화되었습니다.
 '''{{ device.displayName }} was {{ value }}°C'''.ko={{ device.displayName }}이(가){{ value }}°C였습니다.
 '''{{ device.displayName }} was {{ value }}°F'''.ko={{ device.displayName }}이(가) {{ value }}°F였습니다
-'''{{ device.displayName }} battery was {{ value }}%'''.ko={{ device.displayName }}남아있는 배터리는 {{ value }}%입니다.
+'''{{ device.displayName }} battery was {{ value }}'''.ko={{ device.displayName }}남아있는 배터리는 {{ value }}입니다.
 '''Updating device to garage sensor'''.ko=기기-차고 센서 업데이트 중
 '''Updating device to open/close sensor'''.ko=기기-열림/닫힘 센서 업데이트 중
+'''{{ device.displayName }} status was closed'''.ko={{ device.displayName }}은(는) 닫힌 상태입니다
+'''{{ device.displayName }} status was opened'''.ko={{ device.displayName }}은(는) 열린 상태입니다

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -24,13 +24,12 @@
 ===============================================================================
  */
 
-metadata {
+ metadata {
-	definition (name: "SmartSense Multi Sensor", namespace: "smartthings", author: "SmartThings") {
+ 	definition (name: "SmartSense Multi Sensor", namespace: "smartthings", author: "SmartThings") {
-
+        capability "Three Axis"
-		capability "Three Axis"
 		capability "Battery"
-		capability "Configuration"
+ 		capability "Configuration"
-		capability "Sensor"
+        capability "Sensor"
  		capability "Contact Sensor"
  		capability "Acceleration Sensor"
  		capability "Refresh"
@@ -39,13 +38,13 @@ metadata {
  		command "enrollResponse"
  		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3320"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3321"
-		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3321-S", deviceJoinName: "Multipurpose Sensor"
+        fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3321-S", deviceJoinName: "Multipurpose Sensor"
-		fingerprint inClusters: "0000,0001,0003,000F,0020,0402,0500,FC02", outClusters: "0019", manufacturer: "SmartThings", model: "multiv4", deviceJoinName: "Multipurpose Sensor"
+        fingerprint inClusters: "0000,0001,0003,000F,0020,0402,0500,FC02", outClusters: "0019", manufacturer: "SmartThings", model: "multiv4", deviceJoinName: "Multipurpose Sensor"
 
 		attribute "status", "string"
-	}
+ 	}
 
-	simulator {
+ 	simulator {
 		status "open": "zone report :: type: 19 value: 0031"
 		status "closed": "zone report :: type: 19 value: 0030"
 
@@ -62,7 +61,7 @@ metadata {
 		status "x,y,z: 0,1000,0": "x: 0, y: 1000, z: 0"
 		status "x,y,z: 0,0,1000": "x: 0, y: 0, z: 1000"
 	}
-	preferences {
+ 	preferences {
 		section {
 			image(name: 'educationalcontent', multiple: true, images: [
 				"http://cdn.device-gse.smartthings.com/Multi/Multi1.jpg",
@@ -76,9 +75,9 @@ metadata {
 			input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
 		}
 		section {
-			input("garageSensor", "enum", title: "Do you want to use this sensor on a garage door?", description: "Tap to set", options: ["Yes", "No"], defaultValue: "No", required: false, displayDuringSetup: false)
+ 			input("garageSensor", "enum", title: "Do you want to use this sensor on a garage door?", translatable: true, description: "Tap to set", options: ["Yes","No"], defaultValue: "No", required: false, displayDuringSetup: false)
 		}
-	}
+ 	}
 
 	tiles(scale: 2) {
 		multiAttributeTile(name:"status", type: "generic", width: 6, height: 4){
@@ -110,16 +109,19 @@ metadata {
 				]
 			)
 		}
+		valueTile("3axis", "device.threeAxis", decoration: "flat", wordWrap: false, width: 2, height: 2) {
+			state("threeAxis", label:'${currentValue}', unit:"", backgroundColor:"#ffffff")
+		}
 		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
 			state "battery", label:'${currentValue}% battery', unit:""
 		}
-		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+ 		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
+ 			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
-		}
+ 		}
 
 
 		main(["status", "acceleration", "temperature"])
-		details(["status", "acceleration", "temperature", "battery", "refresh"])
+		details(["status", "acceleration", "temperature", "3axis", "battery", "refresh"])
 	}
  }
 
@@ -128,61 +130,61 @@ def parse(String description) {
 	if (description?.startsWith('catchall:')) {
 		map = parseCatchAllMessage(description)
 	}
-	else if (description?.startsWith('temperature: ')) {
+    else if (description?.startsWith('temperature: ')) {
 		map = parseCustomMessage(description)
 	}
 	else if (description?.startsWith('zone status')) {
 		map = parseIasMessage(description)
 	}
 
-	def result = map ? createEvent(map) : null
+ 	def result = map ? createEvent(map) : null
 
 	if (description?.startsWith('enroll request')) {
 		List cmds = enrollResponse()
 		log.debug "enroll response: ${cmds}"
 		result = cmds?.collect { new physicalgraph.device.HubAction(it) }
 	}
-	else if (description?.startsWith('read attr -')) {
+    else if (description?.startsWith('read attr -')) {
-		result = parseReportAttributeMessage(description).each { createEvent(it) }
+        result = parseReportAttributeMessage(description).each { createEvent(it) }
-	}
+    }
 	return result
 }
 
-private Map parseCatchAllMessage(String description) {
+ private Map parseCatchAllMessage(String description) {
-	Map resultMap = [:]
+ 	Map resultMap = [:]
-	def cluster = zigbee.parse(description)
+ 	def cluster = zigbee.parse(description)
-	log.debug cluster
+    log.debug cluster
-	if (shouldProcessMessage(cluster)) {
+ 	if (shouldProcessMessage(cluster)) {
-		switch(cluster.clusterId) {
+ 		switch(cluster.clusterId) {
-			case 0x0001:
+ 			case 0x0001:
-			resultMap = getBatteryResult(cluster.data.last())
+ 			resultMap = getBatteryResult(cluster.data.last())
-			break
+ 			break
 
-			case 0xFC02:
+ 			case 0xFC02:
-			log.debug 'ACCELERATION'
+            log.debug 'ACCELERATION'
-			break
+ 			break
 
-			case 0x0402:
+ 			case 0x0402:
-			log.debug 'TEMP'
+ 			log.debug 'TEMP'
-				// temp is last 2 data values. reverse to swap endian
+                // temp is last 2 data values. reverse to swap endian
-				String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+                String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
-				def value = getTemperature(temp)
+                def value = getTemperature(temp)
-				resultMap = getTemperatureResult(value)
+                resultMap = getTemperatureResult(value)
-				break
+                break
-		}
+            }
-	}
+        }
 
-	return resultMap
+        return resultMap
-}
+    }
 
 private boolean shouldProcessMessage(cluster) {
-	// 0x0B is default response indicating message got through
+    // 0x0B is default response indicating message got through
-	// 0x07 is bind message
+    // 0x07 is bind message
-	boolean ignoredMessage = cluster.profileId != 0x0104 ||
+    boolean ignoredMessage = cluster.profileId != 0x0104 ||
-	cluster.command == 0x0B ||
+    cluster.command == 0x0B ||
-	cluster.command == 0x07 ||
+    cluster.command == 0x07 ||
-	(cluster.data.size() > 0 && cluster.data.first() == 0x3e)
+    (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
-	return !ignoredMessage
+    return !ignoredMessage
 }
 
 private List parseReportAttributeMessage(String description) {
@@ -209,12 +211,10 @@ private List parseReportAttributeMessage(String description) {
 			result << parseAxis(threeAxisAttributes)
 			descMap.value = descMap.value[-2..-1]
 		}
-		result << getAccelerationResult(descMap.value)
+        result << getAccelerationResult(descMap.value)
 	}
 	else if (descMap.cluster == "FC02" && descMap.attrId == "0012" && descMap.value.size() == 24) {
-		// The size is checked to ensure the attribute report contains X, Y and Z values
+        result << parseAxis(descMap.value)
-		// If all three axis are not included then the attribute report is ignored
-		result << parseAxis(descMap.value)
 	}
 	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
 		result << getBatteryResult(Integer.parseInt(descMap.value, 16))
@@ -238,43 +238,43 @@ private Map parseIasMessage(String description) {
 
 	Map resultMap = [:]
 	switch(msgCode) {
-		case '0x0020': // Closed/No Motion/Dry
+        case '0x0020': // Closed/No Motion/Dry
 			if (garageSensor != "Yes"){
 				resultMap = getContactResult('closed')
 			}
-		break
+        break
 
-		case '0x0021': // Open/Motion/Wet
+        case '0x0021': // Open/Motion/Wet
 			if (garageSensor != "Yes"){
 				resultMap = getContactResult('open')
 			}
-		break
+        break
 
-		case '0x0022': // Tamper Alarm
+        case '0x0022': // Tamper Alarm
-		break
+        break
 
-		case '0x0023': // Battery Alarm
+        case '0x0023': // Battery Alarm
-		break
+        break
 
-		case '0x0024': // Supervision Report
+        case '0x0024': // Supervision Report
 			if (garageSensor != "Yes"){
 				resultMap = getContactResult('closed')
 			}
-		break
+        break
 
-		case '0x0025': // Restore Report
+        case '0x0025': // Restore Report
 			if (garageSensor != "Yes"){
 				resultMap = getContactResult('open')
 			}
-		break
+        break
 
-		case '0x0026': // Trouble/Failure
+        case '0x0026': // Trouble/Failure
-		break
+        break
 
-		case '0x0028': // Test Mode
+        case '0x0028': // Test Mode
-		break
+        break
-	}
+    }
-	return resultMap
+    return resultMap
 }
 
 def updated() {
@@ -311,6 +311,7 @@ def getTemperature(value) {
 
 private Map getBatteryResult(rawValue) {
 	log.debug "Battery rawValue = ${rawValue}"
+	def linkText = getLinkText(device)
 
 	def result = [
 		name: 'battery',
@@ -340,7 +341,8 @@ private Map getBatteryResult(rawValue) {
 				def pct = batteryMap[volts]
 				if (pct != null) {
 					result.value = pct
-					result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
+                    def value = pct
+					result.descriptionText = "{{ device.displayName }} battery was {{ value }}"
 				}
 			}
 			else {
@@ -348,7 +350,7 @@ private Map getBatteryResult(rawValue) {
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
 				result.value = Math.min(100, (int) pct * 100)
-				result.descriptionText = "{{ device.displayName }} battery was {{ value }}%"
+				result.descriptionText = "{{ device.displayName }} battery was {{ value }}"
 			}
 		}
 	}
@@ -357,32 +359,52 @@ private Map getBatteryResult(rawValue) {
 }
 
 private Map getTemperatureResult(value) {
-	log.debug "Temperature"
+	log.debug 'TEMP'
+    def name = "temperature"
 	if (tempOffset) {
 		def offset = tempOffset as int
 		def v = value as int
 		value = v + offset
 	}
-	def descriptionText = temperatureScale == 'C' ? '{{ device.displayName }} was {{ value }}°C':
+    
-			'{{ device.displayName }} was {{ value }}°F'
+    def descriptionText
+    if ( temperatureScale == 'C' )
+    	descriptionText = '{{ device.displayName }} was {{ value }}°C'
+    else
+    	descriptionText = '{{ device.displayName }} was {{ value }}°F'
 
 	return [
-	name: 'temperature',
+		name: name,
-	value: value,
+		value: value,
-	descriptionText: descriptionText,
+		descriptionText: descriptionText,
-    translatable: true
+        translatable: true
 	]
 }
 
 private Map getContactResult(value) {
 	log.debug "Contact: ${device.displayName} value = ${value}"
-	def descriptionText = value == 'open' ? '{{ device.displayName }} was opened' : '{{ device.displayName }} was closed'
+    def name = "contact"
-	sendEvent(name: 'contact', value: value, descriptionText: descriptionText, displayed: false, translatable: true)
+    
-	sendEvent(name: 'status', value: value, descriptionText: descriptionText, translatable: true)
+    def descriptionText    
+    if ( value == 'open' )    
+		descriptionText = '{{ device.displayName }} was opened'
+    else
+    	descriptionText = '{{ device.displayName }} was closed'
+        
+    sendEvent(name: 'status', value: value, descriptionText: descriptionText, displayed: false)
+    def isStateChange = isStateChange(device, name, value)
+	return [
+		name: name,
+		value: value,
+		descriptionText: descriptionText,
+        isStateChange: isStateChange,
+        translatable: true
+	]
+	
 }
 
 private getAccelerationResult(numValue) {
-	log.debug "Acceleration"
+	log.debug "Acceleration is $value"
 	def name = "acceleration"
     def value
     def descriptionText
@@ -451,38 +473,37 @@ def refresh() {
 
 def configure() {
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
-	log.debug "Configuring Reporting"
+	log.debug "Configuring Device Reporting"
 		
 	def configCmds = [
 		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
 		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 200",
-		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}", "delay 200",		//checkin time 6 hrs
+		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}",		//checkin time 6 hrs
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
 		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x402 {${device.zigbeeId}} {}", "delay 200",
-		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}", "delay 200",
+		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
 		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0xFC02 {${device.zigbeeId}} {}", "delay 200",
-		"zcl mfg-code ${manufacturerCode}", "delay 200",
+		"zcl mfg-code ${manufacturerCode}",
-		"zcl global send-me-a-report 0xFC02 0x0010 0x18 10 3600 {01}", "delay 200",
+		"zcl global send-me-a-report 0xFC02 0x0010 0x18 10 3600 {01}",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
-		"zcl mfg-code ${manufacturerCode}", "delay 200",
+		"zcl mfg-code ${manufacturerCode}",
-		"zcl global send-me-a-report 0xFC02 0x0012 0x29 1 3600 {0100}", "delay 200",
+		"zcl global send-me-a-report 0xFC02 0x0012 0x29 1 3600 {01}",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
-		"zcl mfg-code ${manufacturerCode}", "delay 200",
+		"zcl mfg-code ${manufacturerCode}",
-		"zcl global send-me-a-report 0xFC02 0x0013 0x29 1 3600 {0100}", "delay 200",
+		"zcl global send-me-a-report 0xFC02 0x0013 0x29 1 3600 {01}",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
-		"zcl mfg-code ${manufacturerCode}", "delay 200",
+		"zcl mfg-code ${manufacturerCode}",
-		"zcl global send-me-a-report 0xFC02 0x0014 0x29 1 3600 {0100}", "delay 200",
+		"zcl global send-me-a-report 0xFC02 0x0014 0x29 1 3600 {01}",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
-		]
+	]
-
 	return configCmds + refresh()
 }
 
@@ -498,12 +519,17 @@ def enrollResponse() {
 		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 		//Enroll Response
-		"raw 0x500 {01 23 00 00 00}", "delay 200",
+		"raw 0x500 {01 23 00 00 00}",
 		"send 0x${device.deviceNetworkId} 1 1", "delay 200"
 	]
 }
 
 private Map parseAxis(String description) {
+	def hexToSignedInt = { hexVal ->
+		def unsignedVal = hexToInt(hexVal)
+		unsignedVal > 32767 ? unsignedVal - 65536 : unsignedVal
+	}
+
 	def z = hexToSignedInt(description[0..3])
 	def y = hexToSignedInt(description[10..13])
 	def x = hexToSignedInt(description[20..23])
@@ -530,11 +556,6 @@ private Map parseAxis(String description) {
 	getXyzResult(xyzResults, description)
 }
 
-private hexToSignedInt(hexVal) {
-	def unsignedVal = hexToInt(hexVal)
-	unsignedVal > 32767 ? unsignedVal - 65536 : unsignedVal
-}
-
 def garageEvent(zValue) {
 	def absValue = zValue.abs()
 	def contactValue = null
@@ -548,9 +569,15 @@ def garageEvent(zValue) {
 		garageValue = 'garage-open'
 	}
 	if (contactValue != null){
-		def descriptionText = contactValue == 'open' ? '{{ device.displayName }} was opened' :'{{ device.displayName }} was closed'
+		def linkText = getLinkText(device)
-		sendEvent(name: 'contact', value: contactValue, descriptionText: descriptionText, displayed:false, translatable: true)
+        if ( contactValue == 'open' ) {
-		sendEvent(name: 'status', value: garageValue, descriptionText: descriptionText, translatable: true)
+        	descriptionText: '{{ device.displayName }} was opened'
+            sendEvent(name: 'contact', value: contactValue, descriptionText: '{{ device.displayName }} was opened', displayed:false, translatable: true)
+            sendEvent(name: 'status', value: garageValue, descriptionText: '{{ device.displayName }} status was opened', translatable: true)
+        } else {
+			sendEvent(name: 'contact', value: contactValue, descriptionText: '{{ device.displayName }} was closed', displayed:false, translatable: true)
+            sendEvent(name: 'status', value: garageValue, descriptionText: '{{ device.displayName }} status was closed', translatable: true)
+        }
 	}
 }
 

devicetypes/smartthings/smartsense-multi.src/smartsense-multi.groovy

@@ -203,7 +203,7 @@ private List parseContactMessage(String description) {
 	parts.each { part ->
 		part = part.trim()
 		if (part.startsWith('contactState:')) {
-			results.addAll(getContactResult(part, description))
+			results << getContactResult(part, description)
 		}
 		else if (part.startsWith('accelerationState:')) {
 			results << getAccelerationResult(part, description)
@@ -316,7 +316,7 @@ private List getContactResult(part, description) {
 	results
 }
 
-private Map getAccelerationResult(part, description) {
+private getAccelerationResult(part, description) {
 	def name = "acceleration"
 	def value = part.endsWith("1") ? "active" : "inactive"
 	def linkText = getLinkText(device)
@@ -335,7 +335,7 @@ private Map getAccelerationResult(part, description) {
 	]
 }
 
-private Map getTempResult(part, description) {
+private getTempResult(part, description) {
 	def name = "temperature"
 	def temperatureScale = getTemperatureScale()
 	def value = zigbee.parseSmartThingsTemperatureValue(part, "temp: ", temperatureScale)
@@ -360,7 +360,7 @@ private Map getTempResult(part, description) {
 	]
 }
 
-private Map getXyzResult(results, description) {
+private getXyzResult(results, description) {
 	def name = "threeAxis"
 	def value = "${results.x},${results.y},${results.z}"
 	def linkText = getLinkText(device)
@@ -379,7 +379,7 @@ private Map getXyzResult(results, description) {
 	]
 }
 
-private Map getBatteryResult(part, description) {
+private getBatteryResult(part, description) {
 	def batteryDivisor = description.split(",").find {it.split(":")[0].trim() == "batteryDivisor"} ? description.split(",").find {it.split(":")[0].trim() == "batteryDivisor"}.split(":")[1].trim() : null
 	def name = "battery"
 	def value = zigbee.parseSmartThingsBatteryValue(part, batteryDivisor)
@@ -400,7 +400,7 @@ private Map getBatteryResult(part, description) {
 	]
 }
 
-private Map getRssiResult(part, description, lastHop=false) {
+private getRssiResult(part, description, lastHop=false) {
 	def name = lastHop ? "lastHopRssi" : "rssi"
 	def valueString = part.split(":")[1].trim()
 	def value = (Integer.parseInt(valueString) - 128).toString()
@@ -431,7 +431,7 @@ private Map getRssiResult(part, description, lastHop=false) {
  * Note: To make the signal strength indicator more accurate, we could combine
  * LQI with RSSI.
  */
-private Map getLqiResult(part, description, lastHop=false) {
+private getLqiResult(part, description, lastHop=false) {
 	def name = lastHop ? "lastHopLqi" : "lqi"
 	def valueString = part.split(":")[1].trim()
 	def percentageOf = 255

devicetypes/smartthings/zigbee-dimmer-power.src/zigbee-dimmer-power.groovy

@@ -56,17 +56,21 @@ metadata {
 def parse(String description) {
     log.debug "description is $description"
 
-    def event = zigbee.getEvent(description)
+    def resultMap = zigbee.getKnownDescription(description)
-    if (event) {
+    if (resultMap) {
-        log.info event
+        log.info resultMap
-        if (event.name == "power") {
+        if (resultMap.type == "update") {
+            log.info "$device updates: ${resultMap.value}"
+        }
+        else if (resultMap.type == "power") {
+            def powerValue
             if (device.getDataValue("manufacturer") != "OSRAM") {       //OSRAM devices do not reliably update power
-                event.value = (event.value as Integer) / 10             //TODO: The divisor value needs to be set as part of configuration
+                powerValue = (resultMap.value as Integer)/10            //TODO: The divisor value needs to be set as part of configuration
-                sendEvent(event)
+                sendEvent(name: "power", value: powerValue)
             }
         }
         else {
-            sendEvent(event)
+            sendEvent(name: resultMap.type, value: resultMap.value)
         }
     }
     else {

devicetypes/smartthings/zigbee-dimmer.src/zigbee-dimmer.groovy

@@ -51,9 +51,15 @@ metadata {
 def parse(String description) {
     log.debug "description is $description"
 
-    def event = zigbee.getEvent(description)
+    def resultMap = zigbee.getKnownDescription(description)
-    if (event) {
+    if (resultMap) {
-        sendEvent(event)
+        log.info resultMap
+        if (resultMap.type == "update") {
+            log.info "$device updates: ${resultMap.value}"
+        }
+        else {
+            sendEvent(name: resultMap.type, value: resultMap.value)
+        }
     }
     else {
         log.warn "DID NOT PARSE MESSAGE for description : $description"

devicetypes/smartthings/zigbee-lock.src/zigbee-lock.groovy

@@ -83,19 +83,32 @@ def uninstalled() {
 }
 
 def configure() {
+    /*
     def cmds =
-        zigbee.configureReporting(CLUSTER_DOORLOCK, DOORLOCK_ATTR_LOCKSTATE,
+        zigbee.configSetup("${CLUSTER_DOORLOCK}", "${DOORLOCK_ATTR_LOCKSTATE}",
-                                  TYPE_ENUM8, 0, 3600, null) +
+                           "${TYPE_ENUM8}", 0, 3600, "{01}") +
-        zigbee.configureReporting(CLUSTER_POWER, POWER_ATTR_BATTERY_PERCENTAGE_REMAINING,
+        zigbee.configSetup("${CLUSTER_POWER}", "${POWER_ATTR_BATTERY_PERCENTAGE_REMAINING}",
-                                  TYPE_U8, 600, 21600, 0x01)
+                           "${TYPE_U8}", 600, 21600, "{01}")
+    */
+    def zigbeeId = device.zigbeeId
+    def cmds =
+        [
+            "zdo bind 0x${device.deviceNetworkId} 0x${device.endpointId} 1 ${CLUSTER_DOORLOCK} {$zigbeeId} {}", "delay 200",
+            "zcl global send-me-a-report ${CLUSTER_DOORLOCK} ${DOORLOCK_ATTR_LOCKSTATE} ${TYPE_ENUM8} 0 3600 {01}", "delay 200",
+            "send 0x${device.deviceNetworkId} 1 0x${device.endpointId}", "delay 200",
+
+            "zdo bind 0x${device.deviceNetworkId} 0x${device.endpointId} 1 ${CLUSTER_POWER} {$zigbeeId} {}", "delay 200",
+            "zcl global send-me-a-report ${CLUSTER_POWER} ${POWER_ATTR_BATTERY_PERCENTAGE_REMAINING} ${TYPE_U8} 600 21600 {01}", "delay 200",
+            "send 0x${device.deviceNetworkId} 1 0x${device.endpointId}", "delay 200",
+        ]
     log.info "configure() --- cmds: $cmds"
     return cmds + refresh() // send refresh cmds as part of config
 }
 
 def refresh() {
     def cmds =
-        zigbee.readAttribute(CLUSTER_DOORLOCK, DOORLOCK_ATTR_LOCKSTATE) +
+        zigbee.refreshData("${CLUSTER_DOORLOCK}", "${DOORLOCK_ATTR_LOCKSTATE}") +
-        zigbee.readAttribute(CLUSTER_POWER, POWER_ATTR_BATTERY_PERCENTAGE_REMAINING)
+        zigbee.refreshData("${CLUSTER_POWER}", "${POWER_ATTR_BATTERY_PERCENTAGE_REMAINING}")
     log.info "refresh() --- cmds: $cmds"
     return cmds
 }
@@ -108,27 +121,34 @@ def parse(String description) {
         map = parseReportAttributeMessage(description)
     }
 
+    log.debug "parse() --- Parse returned $map"
     def result = map ? createEvent(map) : null
-    log.debug "parse() --- returned: $result"
     return result
 }
 
 // Lock capability commands
 def lock() {
-    def cmds = zigbee.command(CLUSTER_DOORLOCK, DOORLOCK_CMD_LOCK_DOOR)
+    //def cmds = zigbee.zigbeeCommand("${CLUSTER_DOORLOCK}", "${DOORLOCK_CMD_LOCK_DOOR}", "{}")
-    log.info "lock() -- cmds: $cmds"
+    //log.info "lock() -- cmds: $cmds"
-    return cmds
+    //return cmds
+    "st cmd 0x${device.deviceNetworkId} 0x${device.endpointId} ${CLUSTER_DOORLOCK} ${DOORLOCK_CMD_LOCK_DOOR} {}"
 }
 
 def unlock() {
-    def cmds = zigbee.command(CLUSTER_DOORLOCK, DOORLOCK_CMD_UNLOCK_DOOR)
+    //def cmds = zigbee.zigbeeCommand("${CLUSTER_DOORLOCK}", "${DOORLOCK_CMD_UNLOCK_DOOR}", "{}")
-    log.info "unlock() -- cmds: $cmds"
+    //log.info "unlock() -- cmds: $cmds"
-    return cmds
+    //return cmds
+    "st cmd 0x${device.deviceNetworkId} 0x${device.endpointId} ${CLUSTER_DOORLOCK} ${DOORLOCK_CMD_UNLOCK_DOOR} {}"
 }
 
 // Private methods
 private Map parseReportAttributeMessage(String description) {
+    log.trace "parseReportAttributeMessage() --- description: $description"
+
     Map descMap = zigbee.parseDescriptionAsMap(description)
+
+    log.debug "parseReportAttributeMessage() --- descMap: $descMap"
+
     Map resultMap = [:]
     if (descMap.clusterInt == CLUSTER_POWER && descMap.attrInt == POWER_ATTR_BATTERY_PERCENTAGE_REMAINING) {
         resultMap.name = "battery"
@@ -136,24 +156,18 @@ private Map parseReportAttributeMessage(String description) {
         if (device.getDataValue("manufacturer") == "Yale") {            //Handling issue with Yale locks incorrect battery reporting
             resultMap.value = Integer.parseInt(descMap.value, 16)
         }
+        log.info "parseReportAttributeMessage() --- battery: ${resultMap.value}"
     }
     else if (descMap.clusterInt == CLUSTER_DOORLOCK && descMap.attrInt == DOORLOCK_ATTR_LOCKSTATE) {
         def value = Integer.parseInt(descMap.value, 16)
-        def linkText = getLinkText(device)
         resultMap.name = "lock"
-        if (value == 0) {
+        resultMap.putAll([0:["value":"unknown",
-            resultMap.value = "unknown"
+                             "descriptionText":"Not fully locked"],
-            resultMap.descriptionText = "${linkText} is not fully locked"
+                          1:["value":"locked"],
-        } else if (value == 1) {
+                          2:["value":"unlocked"]].get(value,
-            resultMap.value = "locked"
+                                                      ["value":"unknown",
-            resultMap.descriptionText = "${linkText} is locked"
+                                                       "descriptionText":"Unknown lock state"]))
-        } else if (value == 2) {
+        log.info "parseReportAttributeMessage() --- lock: ${resultMap.value}"
-            resultMap.value = "unlocked"
-            resultMap.descriptionText = "${linkText} is unlocked"
-        } else {
-            resultMap.value = "unknown"
-            resultMap.descriptionText = "${linkText} is in unknown lock state"
-        }
     }
     else {
         log.debug "parseReportAttributeMessage() --- ignoring attribute"

devicetypes/smartthings/zigbee-switch-power.src/zigbee-switch-power.groovy

@@ -51,15 +51,22 @@ metadata {
 // Parse incoming device messages to generate events
 def parse(String description) {
     log.debug "description is $description"
-    def event = zigbee.getEvent(description)
+
-    if (event) {
+    def resultMap = zigbee.getKnownDescription(description)
-        if (event.name == "power") {
+    if (resultMap) {
+        log.info resultMap
+        if (resultMap.type == "update") {
+            log.info "$device updates: ${resultMap.value}"
+        }
+        else if (resultMap.type == "power") {
             def powerValue
-            powerValue = (event.value as Integer)/10            //TODO: The divisor value needs to be set as part of configuration
+            if (device.getDataValue("manufacturer") != "OSRAM") {       //OSRAM devices do not reliably update power
-            sendEvent(name: "power", value: powerValue)
+                powerValue = (resultMap.value as Integer)/10            //TODO: The divisor value needs to be set as part of configuration
+                sendEvent(name: "power", value: powerValue)
+            }
         }
         else {
-            sendEvent(event)
+            sendEvent(name: resultMap.type, value: resultMap.value)
         }
     }
     else {

devicetypes/smartthings/zigbee-switch.src/zigbee-switch.groovy

@@ -53,9 +53,16 @@ metadata {
 // Parse incoming device messages to generate events
 def parse(String description) {
     log.debug "description is $description"
-    def event = zigbee.getEvent(description)
+
-    if (event) {
+    def resultMap = zigbee.getKnownDescription(description)
-        sendEvent(event)
+    if (resultMap) {
+        log.info resultMap
+        if (resultMap.type == "update") {
+            log.info "$device updates: ${resultMap.value}"
+        }
+        else {
+            sendEvent(name: resultMap.type, value: resultMap.value)
+        }
     }
     else {
         log.warn "DID NOT PARSE MESSAGE for description : $description"

devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/zigbee-white-color-temperature-bulb.groovy

@@ -73,9 +73,16 @@ metadata {
 // Parse incoming device messages to generate events
 def parse(String description) {
     log.debug "description is $description"
-    def event = zigbee.getEvent(description)
+
-    if (event) {
+    def finalResult = zigbee.getKnownDescription(description)
-        sendEvent(event)
+    if (finalResult) {
+        log.info finalResult
+        if (finalResult.type == "update") {
+            log.info "$device updates: ${finalResult.value}"
+        }
+        else {
+            sendEvent(name: finalResult.type, value: finalResult.value)
+        }
     }
     else {
         log.warn "DID NOT PARSE MESSAGE for description : $description"

devicetypes/smartthings/zwave-lock.src/zwave-lock.groovy

@@ -41,7 +41,6 @@ metadata {
 				attributeState "locked", label:'locked', action:"lock.unlock", icon:"st.locks.lock.locked", backgroundColor:"#79b821", nextState:"unlocking"
 				attributeState "unlocked", label:'unlocked', action:"lock.lock", icon:"st.locks.lock.unlocked", backgroundColor:"#ffffff", nextState:"locking"
 				attributeState "unknown", label:"unknown", action:"lock.lock", icon:"st.locks.lock.unknown", backgroundColor:"#ffffff", nextState:"locking"
-				attributeState "jammed", label:"jammed", action:"lock.lock", icon:"st.locks.lock.unknown", backgroundColor:"#ffffff", nextState:"locking"
 				attributeState "locking", label:'locking', icon:"st.locks.lock.locked", backgroundColor:"#79b821"
 				attributeState "unlocking", label:'unlocking', icon:"st.locks.lock.unlocked", backgroundColor:"#ffffff"
 			}
@@ -131,7 +130,7 @@ def zwaveEvent(DoorLockOperationReport cmd) {
 	if (cmd.doorLockMode == 0xFF) {
 		map.value = "locked"
 	} else if (cmd.doorLockMode >= 0x40) {
-		map.value = "unknown" // XXX: Jammed?
+		map.value = "unknown"
 	} else if (cmd.doorLockMode & 1) {
 		map.value = "unlocked with timeout"
 	} else {
@@ -181,7 +180,7 @@ def zwaveEvent(physicalgraph.zwave.commands.alarmv2.AlarmReport cmd) {
 				map = [ name: "lock", value: "unknown", descriptionText: "$device.displayName was not locked fully" ]
 				break
 			case 0xB:
-				map = [ name: "lock", value: "jammed", descriptionText: "$device.displayName is jammed", displayed: true, eventType: "ALERT" ]
+				map = [ name: "lock", value: "unknown", descriptionText: "$device.displayName is jammed" ]
 				break
 			case 0xC:
 				map = [ name: "codeChanged", value: "all", descriptionText: "$device.displayName: all user codes deleted", isStateChange: true ]
@@ -267,7 +266,7 @@ def zwaveEvent(physicalgraph.zwave.commands.alarmv2.AlarmReport cmd) {
 		case 17:
 		case 23:
 		case 26:
-			map = [ name: "lock", value: "jammed", descriptionText: "$device.displayName bolt is jammed", displayed: true, eventType: "ALERT" ]
+			map = [ name: "lock", value: "unknown", descriptionText: "$device.displayName bolt is jammed" ]
 			break
 		case 13:
 			map = [ name: "codeChanged", value: cmd.alarmLevel, descriptionText: "$device.displayName code $cmd.alarmLevel was added", isStateChange: true ]

devicetypes/smartthings/zwave-motion-sensor.src/zwave-motion-sensor.groovy

@@ -57,7 +57,7 @@ def parse(String description) {
 	return result
 }
 
-def sensorValueEvent(value) {
+def sensorValueEvent(Short value) {
 	if (value) {
 		createEvent(name: "motion", value: "active", descriptionText: "$device.displayName detected motion")
 	} else {
@@ -94,24 +94,24 @@ def zwaveEvent(physicalgraph.zwave.commands.notificationv3.NotificationReport cm
 {
 	def result = []
 	if (cmd.notificationType == 0x07) {
-		if (cmd.v1AlarmType == 0x07) {  // special case for nonstandard messages from Monoprice ensors
+		if (cmd.event == 0x01 || cmd.event == 0x02) {
-			result << sensorValueEvent(cmd.v1AlarmLevel)
-		} else if (cmd.event == 0x01 || cmd.event == 0x02 || cmd.event == 0x07 || cmd.event == 0x08) {
 			result << sensorValueEvent(1)
-		} else if (cmd.event == 0x00) {
-			result << sensorValueEvent(0)
 		} else if (cmd.event == 0x03) {
-			result << createEvent(name: "tamper", value: "detected", descriptionText: "$device.displayName covering was removed", isStateChange: true)
+			result << createEvent(descriptionText: "$device.displayName covering was removed", isStateChange: true)
-			result << response(zwave.batteryV1.batteryGet())
+			result << response(zwave.wakeUpV1.wakeUpIntervalSet(seconds:4*3600, nodeid:zwaveHubNodeId))
+			if(!state.MSR) result << response(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
 		} else if (cmd.event == 0x05 || cmd.event == 0x06) {
 			result << createEvent(descriptionText: "$device.displayName detected glass breakage", isStateChange: true)
+		} else if (cmd.event == 0x07) {
+			if(!state.MSR) result << response(zwave.manufacturerSpecificV2.manufacturerSpecificGet())
+			result << sensorValueEvent(1)
 		}
 	} else if (cmd.notificationType) {
 		def text = "Notification $cmd.notificationType: event ${([cmd.event] + cmd.eventParameter).join(", ")}"
-		result << createEvent(name: "notification$cmd.notificationType", value: "$cmd.event", descriptionText: text, isStateChange: true, displayed: false)
+		result << createEvent(name: "notification$cmd.notificationType", value: "$cmd.event", descriptionText: text, displayed: false)
 	} else {
 		def value = cmd.v1AlarmLevel == 255 ? "active" : cmd.v1AlarmLevel ?: "inactive"
-		result << createEvent(name: "alarm $cmd.v1AlarmType", value: value, isStateChange: true, displayed: false)
+		result << createEvent(name: "alarm $cmd.v1AlarmType", value: value, displayed: false)
 	}
 	result
 }

devicetypes/smartthings/zwave-smoke-alarm.src/zwave-smoke-alarm.groovy

@@ -61,44 +61,37 @@ def parse(String description) {
 			zwaveEvent(cmd, results)
 		}
 	}
-	log.debug "'$description' parsed to ${results.inspect()}"
+	// log.debug "\"$description\" parsed to ${results.inspect()}"
 	return results
 }
 
 
 def createSmokeOrCOEvents(name, results) {
 	def text = null
-	switch (name) {
+	if (name == "smoke") {
-		case "smoke":
+		text = "$device.displayName smoke was detected!"
-			text = "$device.displayName smoke was detected!"
+		// these are displayed:false because the composite event is the one we want to see in the app
-			// these are displayed:false because the composite event is the one we want to see in the app
+		results << createEvent(name: "smoke",          value: "detected", descriptionText: text, displayed: false)
-			results << createEvent(name: "smoke",          value: "detected", descriptionText: text, displayed: false)
+	} else if (name == "carbonMonoxide") {
-			break
+		text = "$device.displayName carbon monoxide was detected!"
-		case "carbonMonoxide":
+		results << createEvent(name: "carbonMonoxide", value: "detected", descriptionText: text, displayed: false)
-			text = "$device.displayName carbon monoxide was detected!"
+	} else if (name == "tested") {
-			results << createEvent(name: "carbonMonoxide", value: "detected", descriptionText: text, displayed: false)
+		text = "$device.displayName was tested"
-			break
+		results << createEvent(name: "smoke",          value: "tested", descriptionText: text, displayed: false)
-		case "tested":
+		results << createEvent(name: "carbonMonoxide", value: "tested", descriptionText: text, displayed: false)
-			text = "$device.displayName was tested"
+	} else if (name == "smokeClear") {
-			results << createEvent(name: "smoke",          value: "tested", descriptionText: text, displayed: false)
+		text = "$device.displayName smoke is clear"
-			results << createEvent(name: "carbonMonoxide", value: "tested", descriptionText: text, displayed: false)
+		results << createEvent(name: "smoke",          value: "clear", descriptionText: text, displayed: false)
-			break
+		name = "clear"
-		case "smokeClear":
+	} else if (name == "carbonMonoxideClear") {
-			text = "$device.displayName smoke is clear"
+		text = "$device.displayName carbon monoxide is clear"
-			results << createEvent(name: "smoke",          value: "clear", descriptionText: text, displayed: false)
+		results << createEvent(name: "carbonMonoxide", value: "clear", descriptionText: text, displayed: false)
-			name = "clear"
+		name = "clear"
-			break
+	} else if (name == "testClear") {
-		case "carbonMonoxideClear":
+		text = "$device.displayName smoke is clear"
-			text = "$device.displayName carbon monoxide is clear"
+		results << createEvent(name: "smoke",          value: "clear", descriptionText: text, displayed: false)
-			results << createEvent(name: "carbonMonoxide", value: "clear", descriptionText: text, displayed: false)
+		results << createEvent(name: "carbonMonoxide", value: "clear", displayed: false)
-			name = "clear"
+		name = "clear"
-			break
-		case "testClear":
-			text = "$device.displayName test cleared"
-			results << createEvent(name: "smoke",          value: "clear", descriptionText: text, displayed: false)
-			results << createEvent(name: "carbonMonoxide", value: "clear", displayed: false)
-			name = "clear"
-			break
 	}
 	// This composite event is used for updating the tile
 	results << createEvent(name: "alarmState", value: name, descriptionText: text)
@@ -124,10 +117,8 @@ def zwaveEvent(physicalgraph.zwave.commands.alarmv2.AlarmReport cmd, results) {
 			createSmokeOrCOEvents(cmd.alarmLevel ? "tested" : "testClear", results)
 			break
 		case 13:  // sent every hour -- not sure what this means, just a wake up notification?
-			if (cmd.alarmLevel == 255) {
+			if (cmd.alarmLevel != 255) {
-				results << createEvent(descriptionText: "$device.displayName checked in", isStateChange: false)
+				results << createEvent(descriptionText: "$device.displayName code 13 is $cmd.alarmLevel", displayed: true)
-			} else {
-				results << createEvent(descriptionText: "$device.displayName code 13 is $cmd.alarmLevel", isStateChange:true, displayed:false)
 			}
 			
 			// Clear smoke in case they pulled batteries and we missed the clear msg
@@ -136,8 +127,9 @@ def zwaveEvent(physicalgraph.zwave.commands.alarmv2.AlarmReport cmd, results) {
 			}
 			
 			// Check battery if we don't have a recent battery event
-			if (!state.lastbatt || (now() - state.lastbatt) >= 48*60*60*1000) {
+			def prevBattery = device.currentState("battery")
-				results << response(zwave.batteryV1.batteryGet())
+			if (!prevBattery || (new Date().time - prevBattery.date.time)/60000 >= 60 * 53) {
+				results << new physicalgraph.device.HubAction(zwave.batteryV1.batteryGet().format())
 			}
 			break
 		default:
@@ -166,17 +158,12 @@ def zwaveEvent(physicalgraph.zwave.commands.sensoralarmv1.SensorAlarmReport cmd,
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.wakeupv1.WakeUpNotification cmd, results) {
+	results << new physicalgraph.device.HubAction(zwave.wakeUpV1.wakeUpNoMoreInformation().format())
 	results << createEvent(descriptionText: "$device.displayName woke up", isStateChange: false)
-	if (!state.lastbatt || (now() - state.lastbatt) >= 56*60*60*1000) {
-		results << response(zwave.batteryV1.batteryGet(), "delay 2000", zwave.wakeUpV1.wakeUpNoMoreInformation())
-	} else {
-		results << response(zwave.wakeUpV1.wakeUpNoMoreInformation())
-	}
 }
 
 def zwaveEvent(physicalgraph.zwave.commands.batteryv1.BatteryReport cmd, results) {
-	def map = [ name: "battery", unit: "%", isStateChange: true ]
+	def map = [ name: "battery", unit: "%" ]
-	state.lastbatt = now()
 	if (cmd.batteryLevel == 0xFF) {
 		map.value = 1
 		map.descriptionText = "$device.displayName battery is low!"

smartapps/com-vinli-smartthings/vinli-home-connect.src/vinli-home-connect.groovy

@@ -67,11 +67,11 @@ mappings {
 def listAllDevices() {
    	def resp = []
    	switches.each {
-      resp << [name: it.name, label: it.label, value: it.currentValue("switch"), type: "switch", id: it.id, hub: it.hub?.name]
+      resp << [name: it.name, label: it.label, value: it.currentValue("switch"), type: "switch", id: it.id, hub: it.hub.name]
     }
     
     locks.each {
-      resp << [name: it.name, label: it.label, value: it.currentValue("lock"), type: "lock", id: it.id, hub: it.hub?.name]
+      resp << [name: it.name, label: it.label, value: it.currentValue("lock"), type: "lock", id: it.id, hub: it.hub.name]
     }
     return resp
 }

smartapps/smartthings/ecobee-connect.src/ecobee-connect.groovy

@@ -469,6 +469,7 @@ def pollChild(){
 
 	if (pollChildren()){
 		devices.each { child ->
+			log.info "***found $child"
 			if (!child.device.deviceNetworkId.startsWith("ecobee_sensor")){
 				if(atomicState.thermostats[child.device.deviceNetworkId] != null) {
 					def tData = atomicState.thermostats[child.device.deviceNetworkId]

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -24,7 +24,7 @@ definition(
 	category: "SmartThings Labs",
 	iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/hue.png",
 	iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/hue@2x.png",
-    singleInstance: true
+        //singleInstance: true
 )
 
 preferences {
@@ -68,7 +68,7 @@ def bridgeDiscovery(params=[:])
 	}
 
 	//setup.xml request every 3 seconds except on discoveries
-	if(((bridgeRefreshCount % 3) == 0) && ((bridgeRefreshCount % 5) != 0)) {
+	if(((bridgeRefreshCount % 1) == 0) && ((bridgeRefreshCount % 5) != 0)) {
 		verifyHueBridges()
 	}
 
@@ -175,7 +175,6 @@ private discoverHueBulbs() {
 }
 
 private verifyHueBridge(String deviceNetworkId, String host) {
-	log.trace "Verify Hue Bridge $deviceNetworkId"
 	sendHubCommand(new physicalgraph.device.HubAction([
 		method: "GET",
 		path: "/description.xml",
@@ -603,20 +602,6 @@ def parse(childDevice, description) {
 	}
 }
 
-def hubVerification(bodytext) {
-	log.trace "Bridge sent back description.xml for verification"
-    def body = new XmlSlurper().parseText(bodytext)
-    if (body?.device?.modelName?.text().startsWith("Philips hue bridge")) {
-        def bridges = getHueBridges()
-        def bridge = bridges.find {it?.key?.contains(body?.device?.UDN?.text())}
-        if (bridge) {
-            bridge.value << [name:body?.device?.friendlyName?.text(), serialNumber:body?.device?.serialNumber?.text(), verified: true]
-        } else {
-            log.error "/description.xml returned a bridge that didn't exist"
-        }
-    }
-}
-
 def on(childDevice) {
 	log.debug "Executing 'on'"
 	put("lights/${getId(childDevice)}/state", [on: true])
@@ -657,53 +642,35 @@ def setColorTemperature(childDevice, huesettings) {
 }
 
 def setColor(childDevice, huesettings) {
-    log.debug "Executing 'setColor($huesettings)'"
+	log.debug "Executing 'setColor($huesettings)'"
+	def hue = Math.min(Math.round(huesettings.hue * 65535 / 100), 65535)
+	def sat = Math.min(Math.round(huesettings.saturation * 255 / 100), 255)
+    def alert = huesettings.alert ? huesettings.alert : "none"
+    def transition = huesettings.transition ? huesettings.transition : 4
 
-    def value = [:]
+	def value = [sat: sat, hue: hue, alert: alert, transitiontime: transition]
-    def hue = null
+	if (huesettings.level != null) {
-    def sat = null
+        if (huesettings.level == 1) value.bri = 1 else value.bri = Math.min(Math.round(huesettings.level * 255 / 100), 255)
-    def xy = null
+		value.on = value.bri > 0
+	}
 
-    if (huesettings.hex != null) {
+	if (huesettings.switch) {
-        value.xy = getHextoXY(huesettings.hex)
+		value.on = huesettings.switch == "on"
-    } else {
+	}
-        if (huesettings.hue != null)
-            value.hue = Math.min(Math.round(huesettings.hue * 65535 / 100), 65535)
-        if (huesettings.saturation != null)   
-            value.sat = Math.min(Math.round(huesettings.saturation * 255 / 100), 255)
-    }
 
-    // Default behavior is to turn light on 
+	log.debug "sending command $value"
-    value.on = true
+	put("lights/${getId(childDevice)}/state", value)
-
-    if (huesettings.level != null) {
-        if (huesettings.level <= 0)
-            value.on = false
-        else if (huesettings.level == 1)
-            value.bri = 1
-        else 
-            value.bri = Math.min(Math.round(huesettings.level * 255 / 100), 255)
-    }
-    value.alert = huesettings.alert ? huesettings.alert : "none"
-    value.transition = huesettings.transition ? huesettings.transition : 4
-
-    // Make sure to turn off light if requested
-    if (huesettings.switch == "off")
-        value.on = false
-
-    log.debug "sending command $value"
-    put("lights/${getId(childDevice)}/state", value)
-    return "Color set to $value"
 }
 
 def nextLevel(childDevice) {
-    def level = device.latestValue("level") as Integer ?: 0
+	def level = device.latestValue("level") as Integer ?: 0
-    if (level < 100) {
+	if (level < 100) {
-        level = Math.min(25 * (Math.round(level / 25) + 1), 100) as Integer
+		level = Math.min(25 * (Math.round(level / 25) + 1), 100) as Integer
-    } else {
+	}
-        level = 25
+	else {
-    }
+		level = 25
-    setLevel(childDevice,level)
+	}
+	setLevel(childDevice,level)
 }
 
 private getId(childDevice) {
@@ -776,57 +743,6 @@ private getBridgeIP() {
     return host
 }
 
-private getHextoXY(String colorStr) {
-    // For the hue bulb the corners of the triangle are:
-    // -Red: 0.675, 0.322
-    // -Green: 0.4091, 0.518
-    // -Blue: 0.167, 0.04
-
-    def cred = Integer.valueOf( colorStr.substring( 1, 3 ), 16 )
-    def cgreen = Integer.valueOf( colorStr.substring( 3, 5 ), 16 )
-    def cblue = Integer.valueOf( colorStr.substring( 5, 7 ), 16 )
-
-    double[] normalizedToOne = new double[3];
-    normalizedToOne[0] = (cred / 255);
-    normalizedToOne[1] = (cgreen / 255);
-    normalizedToOne[2] = (cblue / 255);
-    float red, green, blue;
-
-    // Make red more vivid
-    if (normalizedToOne[0] > 0.04045) {
-        red = (float) Math.pow(
-                (normalizedToOne[0] + 0.055) / (1.0 + 0.055), 2.4);
-    } else {
-        red = (float) (normalizedToOne[0] / 12.92);
-    }
-
-    // Make green more vivid
-    if (normalizedToOne[1] > 0.04045) {
-        green = (float) Math.pow((normalizedToOne[1] + 0.055) / (1.0 + 0.055), 2.4);
-    } else {
-        green = (float) (normalizedToOne[1] / 12.92);
-    }
-
-    // Make blue more vivid
-    if (normalizedToOne[2] > 0.04045) {
-        blue = (float) Math.pow((normalizedToOne[2] + 0.055) / (1.0 + 0.055), 2.4);
-    } else {
-        blue = (float) (normalizedToOne[2] / 12.92);
-    }
-
-    float X = (float) (red * 0.649926 + green * 0.103455 + blue * 0.197109);
-    float Y = (float) (red * 0.234327 + green * 0.743075 + blue * 0.022598);
-    float Z = (float) (red * 0.0000000 + green * 0.053077 + blue * 1.035763);
-
-    float x = (X != 0 ? X / (X + Y + Z) : 0);
-    float y = (Y != 0 ? Y / (X + Y + Z) : 0);
-
-    double[] xy = new double[2];
-    xy[0] = x;
-    xy[1] = y;
-    return xy;
-}
-
 private Integer convertHexToInt(hex) {
 	Integer.parseInt(hex,16)
 }

smartapps/smartthings/smart-timer.src/smart-timer.groovy

@@ -0,0 +1,62 @@
+/**
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ *  CoolDeep
+ *
+ *  Author: CoolDeep
+ */
+
+definition(
+    name: "Smart Timer",
+    namespace: "smartthings",
+    author: "CoolDeep",
+    description: "If a light/device is already on, leave it on. Else, if a light/device switches on on a trigger, switch off in a given time",
+    category: "My Apps",
+    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience%402x.png"
+)
+
+preferences {
+	section("When a sesonsor triggers(turns on)...") {
+		input "mySwitch", "capability.switch", title: "Switches", multiple: true, required: true
+        input "mySensor", "capability.contactSensor", title: "Sensors", multiple: true, required: true
+	}
+    section("Turn it off after how many minutes?") {
+		input "minutesLater", "decimal", title: "When?"
+	}
+}
+
+def installed() {
+	log.debug "Installed with settings: ${settings}"
+	subscribe(mySensor, "contact.opened", myHandler)
+}
+
+def updated() {
+	log.debug "Updated with settings: ${settings}"
+	unsubscribe()
+	subscribe(mySensor, "contact.open", myHandler)
+}
+    
+def myHandler(evt) {
+	def lightVal = mySwitch.currentSwitch
+    log.debug ">> TheSwitch current value turned ${lightVal}"
+   
+  	if (lightVal.contains("off")) {
+    	def delay = minutesLater * 60
+    	log.debug ">>> Turning off in ${minutesLater} minutes (${delay}seconds)"
+    	runIn(delay, turnOffSwitch)
+    }
+}
+
+def turnOffSwitch() {
+	mySwitch.off()
+}

smartapps/smartthings/speaker-notify-with-sound.src/speaker-notify-with-sound.groovy

@@ -76,7 +76,7 @@ def mainPage() {
 		}
 		section{
 			input "actionType", "enum", title: "Action?", required: true, defaultValue: "Bell 1", options: [
-				"Custom Message",
+				//"Custom Message",
 				"Bell 1",
 				"Bell 2",
 				"Dogs Barking",
@@ -89,7 +89,7 @@ def mainPage() {
 				"Someone is arriving",
 				"Piano",
 				"Lightsaber"]
-			input "message","text",title:"Play this message", required:false, multiple: false
+			//input "message","text",title:"Play this message", required:false, multiple: false
 		}
 		section {
 			input "sonos", "capability.musicPlayer", title: "On this Speaker player", required: true
@@ -408,15 +408,13 @@ private loadText() {
 		case "Lightsaber":
 			state.sound = [uri: "http://s3.amazonaws.com/smartapp-media/sonos/lightsaber.mp3", duration: "10"]
 			break;
-		case "Custom Message":
+		default:
-			if (message) {
+			/*if (message) {
 				state.sound = textToSpeech(message instanceof List ? message[0] : message) // not sure why this is (sometimes) needed)
 			}
 			else {
 				state.sound = textToSpeech("You selected the custom message option but did not enter a message in the $app.label Smart App")
-			}
+			}*/
-			break;
-		default:
 			state.sound = [uri: "http://s3.amazonaws.com/smartapp-media/sonos/bell1.mp3", duration: "10"]
 			break;
 	}

smartapps/smartthings/wemo-connect.src/wemo-connect.groovy

@@ -234,7 +234,7 @@ def addSwitches() {
 		def d
 		if (selectedSwitch) {
 			d = getChildDevices()?.find {
-				it.deviceNetworkId == selectedSwitch.value.mac || it.device.getDataValue("mac") == selectedSwitch.value.mac
+				it.dni == selectedSwitch.value.mac || it.device.getDataValue("mac") == selectedSwitch.value.mac
 			}
 		}
 
@@ -265,7 +265,7 @@ def addMotions() {
 		def d
 		if (selectedMotion) {
 			d = getChildDevices()?.find {
-				it.deviceNetworkId == selectedMotion.value.mac || it.device.getDataValue("mac") == selectedMotion.value.mac
+				it.dni == selectedMotion.value.mac || it.device.getDataValue("mac") == selectedMotion.value.mac
 			}
 		}
 
@@ -296,7 +296,7 @@ def addLightSwitches() {
 		def d
 		if (selectedLightSwitch) {
 			d = getChildDevices()?.find {
-				it.deviceNetworkId == selectedLightSwitch.value.mac || it.device.getDataValue("mac") == selectedLightSwitch.value.mac
+				it.dni == selectedLightSwitch.value.mac || it.device.getDataValue("mac") == selectedLightSwitch.value.mac
 			}
 		}
 

smartapps/tslagle13/vacation-lighting-director.src/vacation-lighting-director.groovy

@@ -1,17 +1,11 @@
 /**
  *  Vacation Lighting Director
  * 
- * Version  2.5 - Moved scheduling over to Cron and added time as a trigger. 
+ *  Version  2.4 - Added information paragraphs
- *				  Cleaned up formatting and some typos.
- *                Updated license.
- *                Made people option optional
- * 				  Added sttement to unschedule on mode change if people option is not selected
- *
- * Version  2.4 - Added information paragraphs
  * 
  *  Source code can be found here: https://github.com/tslagle13/SmartThings/blob/master/smartapps/tslagle13/vacation-lighting-director.groovy
  *
- *  Copyright 2016 Tim Slagle
+ *  Copyright 2015 Tim Slagle
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -57,7 +51,8 @@ def pageSetup() {
 	return dynamicPage(pageProperties) {
     	section(""){
         	paragraph "This app can be used to make your home seem occupied anytime you are away from your home. " +
-			"Please use each of the the sections below to setup the different preferences to your liking. " 
+			"Please use each othe the sections below to setup the different preferences to your liking. " +
+			"I recommend this app be used with at least two away modes.  An example would be 'Away Day' 'and Away Night'. " 
         }
         section("Setup Menu") {
             href "Setup", title: "Setup", description: "", state:greyedOut()
@@ -75,7 +70,7 @@ def Setup() {
     def newMode = [
         name:       	"newMode",
         type:       	"mode",
-        title:      	"Modes",
+        title:      	"Which?",
         multiple:   	true,
         required:   	true
     ]
@@ -101,6 +96,14 @@ def Setup() {
         required:	true,
     ]
     
+    def people = [
+        name:       "people",
+        type:       "capability.presenceSensor",
+        title:      "If these people are home do not change light status",
+        required:	true,
+        multiple:	true
+    ]
+    
     def pageName = "Setup"
     
     def pageProperties = [
@@ -113,11 +116,10 @@ def Setup() {
 
 		section(""){            
                     paragraph "In this section you need to setup the deatils of how you want your lighting to be affected while " +
-                    "you are away.  All of these settings are required in order for the simulator to run correctly."
+                    paragraph "you are away.  All of these settings are required in order for the simulator to run correctly."
         }
-        section("Simulator Triggers") {
+        section("Which mode change triggers the simulator? (This app will only run in selected mode(s))") {
                     input newMode           
-                    href "timeIntervalInput", title: "Times", description: timeIntervalLabel(), refreshAfterSelection:true
         }
         section("Light switches to turn on/off") {
                     input switches           
@@ -128,6 +130,9 @@ def Setup() {
         section("Number of active lights at any given time") {
                     input number_of_active_lights           
         }    
+        section("People") {
+                    input people            
+        }
     }
     
 }
@@ -158,28 +163,17 @@ def Settings() {
         nextPage:   "pageSetup"
     ]
 
-    def people = [
-        name:       "people",
-        type:       "capability.presenceSensor",
-        title:      "If these people are home do not change light status",
-        required:	false,
-        multiple:	true
-    ]
-
     return dynamicPage(pageProperties) {
 
 		section(""){              
                     paragraph "In this section you can restrict how your simulator runs.  For instance you can restrict on which days it will run " +
-                    "as well as a delay for the simulator to start after it is in the correct mode.  Delaying the simulator helps with false starts based on a incorrect mode change."
+                    paragraph "as well as a delay for the simulator to start after it is in the correct mode.  Delaying the simulator helps with false starts based on a incorrect mode change."
         }
         section("Delay to start simulator") {
                     input falseAlarmThreshold
         }
-        section("People") {
-        			paragraph "Not using this setting may cause some lights to remain on when you arrive home"
-                    input people            
-        }
         section("More options") {
+                    href "timeIntervalInput", title: "Only during a certain time", description: getTimeLabel(starting, ending), state: greyedOutTime(starting, ending), refreshAfterSelection:true
                     input days
         } 
     }   
@@ -187,24 +181,9 @@ def Settings() {
 
 page(name: "timeIntervalInput", title: "Only during a certain time", refreshAfterSelection:true) {
 		section {
-			input "startTimeType", "enum", title: "Starting at", options: [["time": "A specific time"], ["sunrise": "Sunrise"], ["sunset": "Sunset"]], defaultValue: "time", submitOnChange: true
+			input "starting", "time", title: "Starting", required: false 
-			if (startTimeType in ["sunrise","sunset"]) {
+			input "ending", "time", title: "Ending", required: false 
-				input "startTimeOffset", "number", title: "Offset in minutes (+/-)", range: "*..*", required: false
-			}
-			else {
-				input "starting", "time", title: "Start time", required: false
-			}
 		}
-		section {
-			input "endTimeType", "enum", title: "Ending at", options: [["time": "A specific time"], ["sunrise": "Sunrise"], ["sunset": "Sunset"]], defaultValue: "time", submitOnChange: true
-			if (endTimeType in ["sunrise","sunset"]) {
-				input "endTimeOffset", "number", title: "Offset in minutes (+/-)", range: "*..*", required: false
-			}
-			else {
-				input "ending", "time", title: "End time", required: false
-			}
-		}
-        
 }
 
 def installed() {
@@ -222,13 +201,10 @@ def initialize(){
 	if (newMode != null) {
 		subscribe(location, modeChangeHandler)
     }
-    if (starting != null) {
-    	schedule(starting, modeChangeHandler)
-    }
-    log.debug "Installed with settings: ${settings}"
 }
 
 def modeChangeHandler(evt) {
+	log.debug "Mode change to: ${evt.value}"
 		def delay = (falseAlarmThreshold != null && falseAlarmThreshold != "") ? falseAlarmThreshold * 60 : 2 * 60  
     	runIn(delay, scheduleCheck)
 }
@@ -236,55 +212,49 @@ def modeChangeHandler(evt) {
 
 //Main logic to pick a random set of lights from the large set of lights to turn on and then turn the rest off
 def scheduleCheck(evt) {
-    if(allOk){
+if(allOk){
-        log.debug("Running")
+log.debug("Running")
-        // turn off all the switches
+  // turn off all the switches
-        switches.off()
+  switches.off()
 
-        // grab a random switch
+  // grab a random switch
-        def random = new Random()
+  def random = new Random()
-        def inactive_switches = switches
+  def inactive_switches = switches
-        for (int i = 0 ; i < number_of_active_lights ; i++) {
+  for (int i = 0 ; i < number_of_active_lights ; i++) {
-            // if there are no inactive switches to turn on then let's break
+    // if there are no inactive switches to turn on then let's break
-            if (inactive_switches.size() == 0){
+    if (inactive_switches.size() == 0){
-                break
+      break
-            }
-            
-            // grab a random switch and turn it on
-            def random_int = random.nextInt(inactive_switches.size())
-            inactive_switches[random_int].on()
-            
-            // then remove that switch from the pool off switches that can be turned on
-            inactive_switches.remove(random_int)
-        }
-        
-        // re-run again when the frequency demands it
-        schedule("0 0/${frequency_minutes} * 1/1 * ? *", scheduleCheck)
     }
-    //Check to see if mode is ok but not time/day.  If mode is still ok, check again after frequency period.
+
-    else if (modeOk) {
+    // grab a random switch and turn it on
-        log.debug("mode OK.  Running again")
+    def random_int = random.nextInt(inactive_switches.size())
-        switches.off()
+    inactive_switches[random_int].on()
-    }
+
-    //if none is ok turn off frequency check and turn off lights.
+    // then remove that switch from the pool off switches that can be turned on
-    else {
+    inactive_switches.remove(random_int)
-    	if(people){
+  }
-        	//don't turn off lights if anyone is home
+
-        	if(someoneIsHome()){
+  // re-run again when the frequency demands it
-        	    log.debug("Stopping Check for Light")
+  runIn(frequency_minutes * 60, scheduleCheck)
-        	    unschedule()
+}
-        	}
+//Check to see if mode is ok but not time/day.  If mode is still ok, check again after frequency period.
-        	else{
+else if (modeOk) {
-        	    log.debug("Stopping Check for Light and turning off all lights")
+	log.debug("mode OK.  Running again")
-        	    switches.off()
+	runIn(frequency_minutes * 60, scheduleCheck)
-        	    unschedule()
+    switches.off()
-        	}
+}
+//if none is ok turn off frequency check and turn off lights.
+else if(people){
+    //don't turn off lights if anyone is home
+		if(someoneIsHome()){
+		log.debug("Stopping Check for Light")
     	}
-        else if (!modeOk) {
+        else{
-        	unschedule()
+    log.debug("Stopping Check for Light and turning off all lights")
-        }
+	switches.off()
     }
 }
+}      
 
 
 //below is used to check restrictions
@@ -316,6 +286,26 @@ private getDaysOk() {
 	result
 }
 
+private getTimeOk() {
+	def result = true
+	if (starting && ending) {
+		def currTime = now()
+		def start = timeToday(starting).time
+		def stop = timeToday(ending).time
+		result = start < stop ? currTime >= start && currTime <= stop : currTime <= stop || currTime >= start
+	}
+    
+    else if (starting){
+    	result = currTime >= start
+    }
+    else if (ending){
+    	result = currTime <= stop
+    }
+    
+	log.trace "timeOk = $result"
+	result
+}
+
 private getHomeIsEmpty() {
   def result = true
 
@@ -340,59 +330,25 @@ private getSomeoneIsHome() {
   return result
 }
 
-private getTimeOk() {
+
-	def result = true
+//gets the label for time restriction. Label phrasing changes depending on if there is both start and stop times or just one start/stop time.
-	def start = timeWindowStart()
+def getTimeLabel(starting, ending){
-	def stop = timeWindowStop()
+
-	if (start && stop && location.timeZone) {
+	def timeLabel = "Tap to set"
-		result = timeOfDayIsBetween(start, stop, new Date(), location.timeZone)
+	
-	}
+    if(starting && ending){
-	log.trace "timeOk = $result"
+    	timeLabel = "Between" + " " + hhmm(starting) + " "  + "and" + " " +  hhmm(ending)
-	result
+    }
-}
+    else if (starting) {
-
+		timeLabel = "Start at" + " " + hhmm(starting)
-private timeWindowStart() {
+    }
-	def result = null
+    else if(ending){
-	if (startTimeType == "sunrise") {
+    timeLabel = "End at" + hhmm(ending)
-		result = location.currentState("sunriseTime")?.dateValue
+    }
-		if (result && startTimeOffset) {
+	timeLabel
-			result = new Date(result.time + Math.round(startTimeOffset * 60000))
-		}
-	}
-	else if (startTimeType == "sunset") {
-		result = location.currentState("sunsetTime")?.dateValue
-		if (result && startTimeOffset) {
-			result = new Date(result.time + Math.round(startTimeOffset * 60000))
-		}
-	}
-	else if (starting && location.timeZone) {
-		result = timeToday(starting, location.timeZone)
-	}
-	log.trace "timeWindowStart = ${result}"
-	result
-}
-
-private timeWindowStop() {
-	def result = null
-	if (endTimeType == "sunrise") {
-		result = location.currentState("sunriseTime")?.dateValue
-		if (result && endTimeOffset) {
-			result = new Date(result.time + Math.round(endTimeOffset * 60000))
-		}
-	}
-	else if (endTimeType == "sunset") {
-		result = location.currentState("sunsetTime")?.dateValue
-		if (result && endTimeOffset) {
-			result = new Date(result.time + Math.round(endTimeOffset * 60000))
-		}
-	}
-	else if (ending && location.timeZone) {
-		result = timeToday(ending, location.timeZone)
-	}
-	log.trace "timeWindowStop = ${result}"
-	result
 }
 
+//fomrats time to readable format for time label
 private hhmm(time, fmt = "h:mm a")
 {
 	def t = timeToday(time, location.timeZone)
@@ -401,41 +357,6 @@ private hhmm(time, fmt = "h:mm a")
 	f.format(t)
 }
 
-private timeIntervalLabel() {
-	def start = ""
-	switch (startTimeType) {
-		case "time":
-			if (ending) {
-            	start += hhmm(starting)
-            }
-			break
-		case "sunrise":
-		case "sunset":
-        	start += startTimeType[0].toUpperCase() + startTimeType[1..-1]
-			if (startTimeOffset) {
-				start += startTimeOffset > 0 ? "+${startTimeOffset} min" : "${startTimeOffset} min"
-			}
-			break
-	}
-
-    def finish = ""
-	switch (endTimeType) {
-		case "time":
-			if (ending) {
-            	finish += hhmm(ending)
-            }
-			break
-		case "sunrise":
-		case "sunset":
-        	finish += endTimeType[0].toUpperCase() + endTimeType[1..-1]
-			if (endTimeOffset) {
-				finish += endTimeOffset > 0 ? "+${endTimeOffset} min" : "${endTimeOffset} min"
-			}
-			break
-	}
-	start && finish ? "${start} to ${finish}" : ""
-}
-
 //sets complete/not complete for the setup section on the main dynamic page
 def greyedOut(){
 	def result = ""
@@ -448,7 +369,16 @@ def greyedOut(){
 //sets complete/not complete for the settings section on the main dynamic page
 def greyedOutSettings(){
 	def result = ""
-    if (people || days || falseAlarmThreshold ) {
+    if (starting || ending || days || falseAlarmThreshold) {
+    	result = "complete"	
+    }
+    result
+}
+
+//sets complete/not complete for time restriction section in settings
+def greyedOutTime(starting, ending){
+	def result = ""
+    if (starting || ending) {
     	result = "complete"	
     }
     result