MSA-958: This module controls light bulbs along with door open/close sensors. If a light bulb is already on when a door opens, it stays on. Else, it will switch off after specified interval.

[DVCSMP-1107] Prepping up v1 multi for garage door functionality

devicetypes/com-obycode/beaconthing.src/beaconthing.groovy

@@ -0,0 +1,107 @@
+/**
+*  BeaconThing
+*
+*  Copyright 2015 obycode
+*
+*  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+*  in compliance with the License. You may obtain a copy of the License at:
+*
+*      http://www.apache.org/licenses/LICENSE-2.0
+*
+*  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+*  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+*  for the specific language governing permissions and limitations under the License.
+*
+*/
+
+import groovy.json.JsonSlurper
+
+metadata {
+	definition (name: "BeaconThing", namespace: "com.obycode", author: "obycode") {
+		capability "Beacon"
+		capability "Presence Sensor"
+		capability "Sensor"
+
+		attribute "inRange", "json_object"
+		attribute "inRangeFriendly", "string"
+
+		command "setPresence", ["string"]
+		command "arrived", ["string"]
+		command "left", ["string"]
+	}
+
+	simulator {
+		status "present": "presence: 1"
+		status "not present": "presence: 0"
+	}
+
+	tiles {
+		standardTile("presence", "device.presence", width: 2, height: 2, canChangeBackground: true) {
+			state("present", labelIcon:"st.presence.tile.present", backgroundColor:"#53a7c0")
+			state("not present", labelIcon:"st.presence.tile.not-present", backgroundColor:"#ffffff")
+		}
+		valueTile("inRange", "device.inRangeFriendly", inactiveLabel: true, height:1, width:3, decoration: "flat") {
+			state "default", label:'${currentValue}', backgroundColor:"#ffffff"
+		}
+		main "presence"
+		details (["presence","inRange"])
+	}
+}
+
+// parse events into attributes
+def parse(String description) {
+	log.debug "Parsing '${description}'"
+}
+
+def installed() {
+	sendEvent(name: "presence", value: "not present")
+	def emptyList = []
+	def json = new groovy.json.JsonBuilder(emptyList)
+	sendEvent(name:"inRange", value:json.toString())
+}
+
+def setPresence(status) {
+	log.debug "Status is $status"
+	sendEvent(name:"presence", value:status)
+}
+
+def arrived(id) {
+	log.debug "$id has arrived"
+	def theList = device.latestValue("inRange")
+	def inRangeList = new JsonSlurper().parseText(theList)
+	if (inRangeList.contains(id)) {
+		return
+	}
+	inRangeList += id
+	def json = new groovy.json.JsonBuilder(inRangeList)
+	log.debug "Now in range: ${json.toString()}"
+	sendEvent(name:"inRange", value:json.toString())
+
+	// Generate human friendly string for tile
+	def friendlyList = "Nearby: " + inRangeList.join(", ")
+	sendEvent(name:"inRangeFriendly", value:friendlyList)
+
+	if (inRangeList.size() == 1) {
+		setPresence("present")
+	}
+}
+
+def left(id) {
+	log.debug "$id has left"
+	def theList = device.latestValue("inRange")
+	def inRangeList = new JsonSlurper().parseText(theList)
+	inRangeList -= id
+	def json = new groovy.json.JsonBuilder(inRangeList)
+	log.debug "Now in range: ${json.toString()}"
+	sendEvent(name:"inRange", value:json.toString())
+
+	// Generate human friendly string for tile
+	def friendlyList = "Nearby: " + inRangeList.join(", ")
+
+	if (inRangeList.empty) {
+		setPresence("not present")
+		friendlyList = "No one is nearby"
+	}
+
+	sendEvent(name:"inRangeFriendly", value:friendlyList)
+}

devicetypes/roomieremote-agent/simple-sync.src/simple-sync.groovy

@@ -0,0 +1,128 @@
+/**
+ *  Simple Sync
+ *
+ *  Copyright 2015 Roomie Remote, Inc.
+ *
+ *	Date: 2015-09-22
+ */
+metadata
+{
+	definition (name: "Simple Sync", namespace: "roomieremote-agent", author: "Roomie Remote, Inc.")
+    {
+		capability "Media Controller"
+	}
+
+	// simulator metadata
+	simulator
+    {
+	}
+
+	// UI tile definitions
+	tiles
+    {
+		standardTile("mainTile", "device.status", width: 1, height: 1, icon: "st.Entertainment.entertainment11")
+        {
+        	state "default", label: "Simple Sync", icon: "st.Home.home2", backgroundColor: "#55A7FF"
+		}
+        
+    	def detailTiles = ["mainTile"]
+		
+		main "mainTile"
+		details(detailTiles)
+	}
+}
+
+def parse(String description)
+{
+	def results = []
+	
+	try
+	{
+		def msg = parseLanMessage(description)
+		
+		if (msg.headers && msg.body)
+		{
+        	switch (msg.headers["X-Roomie-Echo"])
+			{
+            	case "getAllActivities":
+                    handleGetAllActivitiesResponse(msg)
+                	break
+			}
+    	}
+	}
+    catch (Throwable t)
+    {
+	    sendEvent(name: "parseError", value: "$t", description: description)
+    	throw t
+    }
+    
+    results
+}
+
+def handleGetAllActivitiesResponse(response)
+{
+	def body = parseJson(response.body)
+    
+    if (body.status == "success")
+    {
+	    def json = new groovy.json.JsonBuilder()
+	    def root = json activities: body.data
+	    def data = json.toString()
+    	
+	    sendEvent(name: "activities", value: data)
+    }
+}
+
+def getAllActivities(evt)
+{
+    def host = getHostAddress(device.deviceNetworkId)
+	
+	def action = new physicalgraph.device.HubAction(method: "GET",
+													path: "/api/v1/activities",
+													headers: [HOST: host, "X-Roomie-Echo": "getAllActivities"])
+	
+	action
+}
+
+def startActivity(evt)
+{
+    def uuid = evt
+    def host = getHostAddress(device.deviceNetworkId)
+    def activity = new groovy.json.JsonSlurper().parseText(device.currentValue('activities') ?: "{ 'activities' : [] }").activities.find { it.uuid == uuid }
+    def toggle = activity["toggle"]
+    def jsonMap = ["activity_uuid": uuid]
+    
+    if (toggle != null)
+    {
+        jsonMap << ["toggle_state": toggle ? "on" : "off"]
+    }
+    
+    def json = new groovy.json.JsonBuilder(jsonMap)
+    def jsonBody = json.toString()
+    def headers = [HOST: host, "Content-Type": "application/json"]
+    
+    def action = new physicalgraph.device.HubAction(method: "POST",
+													path: "/api/v1/runactivity",
+													body: jsonBody,
+													headers: headers)
+	
+    action
+}
+
+def getHostAddress(d)
+{
+	def parts = d.split(":")
+	def ip = convertHexToIP(parts[0])
+	def port = convertHexToInt(parts[1])
+	return ip + ":" + port
+}
+
+def String convertHexToIP(hex)
+{
+	[convertHexToInt(hex[0..1]),convertHexToInt(hex[2..3]),convertHexToInt(hex[4..5]),convertHexToInt(hex[6..7])].join(".")
+}
+
+def Integer convertHexToInt(hex)
+{
+	Integer.parseInt(hex,16)
+}

devicetypes/smartthings/arrival-sensor-ha.src/arrival-sensor-ha.groovy

@@ -11,6 +11,17 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
+ 
+ /*
+ *  Purpose: Arrival Sensor HA DTH File
+ *
+ *  Filename: Arrival-Sensor-HA.src/Arrival-Sensor-HA.groovy
+ *
+ *  Change History:
+ *  1. 20160115 TW - Update/Edit to support i18n translations
+ *  2. 20160121 TW - Update to V4 battery calcs, added pref's page title translations
+ */
+ 
 metadata {
     definition (name: "Arrival Sensor HA", namespace: "smartthings", author: "SmartThings") {
         capability "Tone"
@@ -32,7 +43,7 @@ metadata {
                 ])
         }
         section {
-            input "checkInterval", "enum", title: "Presence timeout (minutes)",
+            input "checkInterval", "enum", title: "Presence timeout (minutes)", description: "Tap to set",
                     defaultValue:"2", options: ["2", "3", "5"], displayDuringSetup: false
         }
     }
@@ -82,7 +93,6 @@ def parse(String description) {
 
 private handleReportAttributeMessage(String description) {
     def descMap = zigbee.parseDescriptionAsMap(description)
-
     if (descMap.clusterInt == 0x0001 && descMap.attrInt == 0x0020) {
         handleBatteryEvent(Integer.parseInt(descMap.value, 16))
     }
@@ -94,6 +104,7 @@ private handleReportAttributeMessage(String description) {
  * @param volts Battery voltage in .1V increments
  */
 private handleBatteryEvent(volts) {
+	def descriptionText
     if (volts == 0 || volts == 255) {
         log.debug "Ignoring invalid value for voltage (${volts/10}V)"
     }
@@ -107,15 +118,17 @@ private handleBatteryEvent(volts) {
             volts = minVolts
         else if (volts > maxVolts)
             volts = maxVolts
-        def pct = batteryMap[volts]
-        if (pct != null) {
+        def value = batteryMap[volts]
+        if (value != null) {
             def linkText = getLinkText(device)
+            descriptionText = '{{ linkText }} battery was {{ value }}'
             def eventMap = [
                 name: 'battery',
-                value: pct,
-                descriptionText: "${linkText} battery was ${pct}%"
+                value: value,
+                descriptionText: descriptionText,
+                translatable: true
             ]
-            log.debug "Creating battery event for voltage=${volts/10}V: ${eventMap}"
+            log.debug "Creating battery event for voltage=${volts/10}V: ${linkText} ${eventMap.name} is ${eventMap.value}%"
             sendEvent(eventMap)
         }
     }
@@ -131,13 +144,19 @@ private handlePresenceEvent(present) {
         stopTimer()
     }
     def linkText = getLinkText(device)
+    def descriptionText
+    if ( present )
+    	descriptionText = "{{ linkText }} has arrived"
+    else
+    	descriptionText = "{{ linkText }} has left"
     def eventMap = [
         name: "presence",
         value: present ? "present" : "not present",
         linkText: linkText,
-        descriptionText: "${linkText} has ${present ? 'arrived' : 'left'}",
+        descriptionText: descriptionText,
+        translatable: true
     ]
-    log.debug "Creating presence event: ${eventMap}"
+    log.debug "Creating presence event: ${device.displayName} ${eventMap.name} is ${eventMap.value}"
     sendEvent(eventMap)
 }
 
@@ -158,4 +177,4 @@ def checkPresenceCallback() {
     if (timeSinceLastCheckin >= theCheckInterval) {
         handlePresenceEvent(false)
     }
-}
+}

devicetypes/smartthings/arrival-sensor-ha.src/i18n/messages.properties

@@ -0,0 +1,35 @@
+#==============================================================================
+#  Copyright 2016 SmartThings
+#
+#  Licensed under the Apache License, Version 2.0 (the "License"); you may not 
+#  use this file except in compliance with the License. You may obtain a copy 
+#  of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+#  Unless required by applicable law or agreed to in writing, software 
+#  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT 
+#  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the 
+#  License for the specific language governing permissions and limitations 
+#  under the License.
+#==============================================================================
+# Purpose: Arrival Sensor HA i18n Translation File
+#
+# Filename: Arrival-Sensor-HA.src/i18n/messages.properties
+#
+# Change History:
+#	1. 20160115 TW Initial release with informal Korean translation.
+#	2. 20160121 TW Added def preference section titles.
+#==============================================================================
+# Korean (ko)
+# Device Preferences
+'''Give your device a name'''.ko=기기 이름 바꾸기
+'''Set Device Image'''.ko=기기 이미지 설정
+'''Presence timeout (minutes)'''.ko=시간 초과. 스마트폰 위치 정보
+'''Tap to set'''.ko=눌러서 설정
+'''Arrival Sensor'''.ko=도착알림 센서
+# Events / Notifications
+'''{{ linkText }} battery was {{ value }}'''.ko={{ linkText }}남아있는 배터리는 {{ value }}입니다.
+'''{{ linkText }} has arrived'''.ko={{ linkText }}집에 도착했습니다.
+'''{{ linkText }} has left'''.ko={{ linkText }}집을 나갔습니다.
+#==============================================================================

devicetypes/smartthings/cree-bulb.src/cree-bulb.groovy

@@ -1,7 +1,7 @@
 /**
  *  Cree Bulb
  *
- *  Copyright 2014 SmartThings
+ *  Copyright 2016 SmartThings
  *
  *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
  *  in compliance with the License. You may obtain a copy of the License at:
@@ -15,29 +15,29 @@
  */
  
 metadata {
-	definition (name: "Cree Bulb", namespace: "smartthings", author: "SmartThings") {
+    definition (name: "Cree Bulb", namespace: "smartthings", author: "SmartThings") {
 
-		capability "Actuator"
+        capability "Actuator"
         capability "Configuration"
-		capability "Refresh"
-		capability "Switch"
-		capability "Switch Level"
+        capability "Refresh"
+        capability "Switch"
+        capability "Switch Level"
 
-		fingerprint profileId: "C05E", inClusters: "0000,0003,0004,0005,0006,0008,1000", outClusters: "0000,0019"
-	}
+        fingerprint profileId: "C05E", inClusters: "0000,0003,0004,0005,0006,0008,1000", outClusters: "0000,0019"
+    }
 
-	// simulator metadata
-	simulator {
-		// status messages
-		status "on": "on/off: 1"
-		status "off": "on/off: 0"
+    // simulator metadata
+    simulator {
+        // status messages
+        status "on": "on/off: 1"
+        status "off": "on/off: 0"
 
-		// reply messages
-		reply "zcl on-off on": "on/off: 1"
-		reply "zcl on-off off": "on/off: 0"
-	}
+        // reply messages
+        reply "zcl on-off on": "on/off: 1"
+        reply "zcl on-off off": "on/off: 0"
+    }
 
-	// UI tile definitions
+    // UI tile definitions
     tiles(scale: 2) {
         multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
             tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
@@ -62,18 +62,12 @@ metadata {
 def parse(String description) {
     log.debug "description is $description"
 
-    def resultMap = zigbee.getKnownDescription(description)
+    def resultMap = zigbee.getEvent(description)
     if (resultMap) {
-        log.info resultMap
-        if (resultMap.type == "update") {
-            log.info "$device updates: ${resultMap.value}"
-        }
-        else {
-            sendEvent(name: resultMap.type, value: resultMap.value)
-        }
+        sendEvent(resultMap)
     }
     else {
-        log.warn "DID NOT PARSE MESSAGE for description : $description"
+        log.debug "DID NOT PARSE MESSAGE for description : $description"
         log.debug zigbee.parseDescriptionAsMap(description)
     }
 }
@@ -87,7 +81,7 @@ def on() {
 }
 
 def setLevel(value) {
-    zigbee.setLevel(value)
+    zigbee.setLevel(value) + ["delay 500"] + zigbee.levelRefresh()         //adding refresh because of ZLL bulb not conforming to send-me-a-report
 }
 
 def refresh() {

devicetypes/smartthings/ecobee-sensor.src/ecobee-sensor.groovy

@@ -20,7 +20,6 @@ metadata {
 		capability "Temperature Measurement"
 		capability "Motion Sensor"
 		capability "Refresh"
-		capability "Polling"
 	}
 
 	tiles {
@@ -48,8 +47,8 @@ metadata {
 		}
 
 		standardTile("motion", "device.motion") {
-			state("active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0")
 			state("inactive", label:'no motion', icon:"st.motion.motion.inactive", backgroundColor:"#ffffff")
+			state("active", label:'motion', icon:"st.motion.motion.active", backgroundColor:"#53a7c0")
 		}
 
 		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat") {
@@ -68,6 +67,6 @@ def refresh() {
 
 void poll() {
 	log.debug "Executing 'poll' using parent SmartApp"
-	parent.pollChild(this)
+	parent.pollChild()
 
 }

devicetypes/smartthings/ecobee-thermostat.src/ecobee-thermostat.groovy

@@ -20,7 +20,6 @@ metadata {
 		capability "Actuator"
 		capability "Thermostat"
 		capability "Temperature Measurement"
-		capability "Polling"
 		capability "Sensor"
 		capability "Refresh"
 		capability "Relative Humidity Measurement"
@@ -134,9 +133,7 @@ def refresh() {
 
 void poll() {
 	log.debug "Executing 'poll' using parent SmartApp"
-
-	def results = parent.pollChild(this)
-	generateEvent(results) //parse received message from parent
+	parent.pollChild()
 }
 
 def generateEvent(Map results) {

devicetypes/smartthings/ge-link-bulb.src/ge-link-bulb.groovy

@@ -36,155 +36,71 @@
  *				Slider range from 0..100
  *	Change 9:	2015-03-06	(Juan Risso)
  *				Setlevel -> value to integer (to prevent smartapp calling this function from not working).
+ *	Change 10: 	2016-03-06	(Vinay Rao/Tom Manley)
+ *				changed 2/3rds of the file to clean up code and add zigbee library improvements
  *
  */
 
 metadata {
-	definition (name: "GE Link Bulb", namespace: "smartthings", author: "SmartThings") {
+    definition (name: "GE Link Bulb", namespace: "smartthings", author: "SmartThings") {
 
-    	capability "Actuator"
+        capability "Actuator"
         capability "Configuration"
         capability "Refresh"
-		capability "Sensor"
+        capability "Sensor"
         capability "Switch"
-		capability "Switch Level"
+        capability "Switch Level"
         capability "Polling"
 
         fingerprint profileId: "0104", inClusters: "0000,0003,0004,0005,0006,0008,1000", outClusters: "0019", manufacturer: "GE_Appliances", model: "ZLL Light", deviceJoinName: "GE Link Bulb"
-	}
+    }
 
 	// UI tile definitions
-	tiles {
-		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
-			state "on", label: '${name}', action: "switch.off", icon: "st.switches.light.on", backgroundColor: "#79b821", nextState:"turningOff"
-			state "off", label: '${name}', action: "switch.on", icon: "st.switches.light.off", backgroundColor: "#ffffff", nextState:"turningOn"
- 			state "turningOn", label:'${name}', action: "switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
-            state "turningOff", label:'${name}', action: "switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
-		}
-		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
-			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-		}
-		controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 3, inactiveLabel: false, range:"(0..100)") {
-			state "level", action:"switch level.setLevel"
-		}
-		valueTile("level", "device.level", inactiveLabel: false, decoration: "flat") {
-			state "level", label: 'Level ${currentValue}%'
-		}
-
-		main(["switch"])
-		details(["switch", "level", "levelSliderControl", "refresh"])
-	}
-
-	    preferences {
-
-        	input("dimRate", "enum", title: "Dim Rate", options: ["Instant", "Normal", "Slow", "Very Slow"], defaultValue: "Normal", required: false, displayDuringSetup: true)
-            input("dimOnOff", "enum", title: "Dim transition for On/Off commands?", options: ["Yes", "No"], defaultValue: "No", required: false, displayDuringSetup: true)
+    tiles(scale: 2) {
+        multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+                attributeState "on", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "off", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
+                attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.light.on", backgroundColor:"#79b821", nextState:"turningOff"
+                attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
+            }
+            tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+                attributeState "level", action:"switch level.setLevel"
+            }
+        }
+        standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+        }
+        main "switch"
+        details(["switch", "refresh"])
+    }
 
+    preferences {
+        input("dimRate", "enum", title: "Dim Rate", options: ["Instant", "Normal", "Slow", "Very Slow"], defaultValue: "Normal", required: false, displayDuringSetup: true)
+        input("dimOnOff", "enum", title: "Dim transition for On/Off commands?", options: ["Yes", "No"], defaultValue: "No", required: false, displayDuringSetup: true)
     }
 }
 
 // Parse incoming device messages to generate events
 def parse(String description) {
-	log.trace description
-
-    if (description?.startsWith("on/off:")) {
-		log.debug "The bulb was sent a command to do something just now..."
-		if (description[-1] == "1") {
-        	def result = createEvent(name: "switch", value: "on")
-            log.debug "On command was sent maybe from manually turning on? : Parse returned ${result?.descriptionText}"
-            return result
-        } else if (description[-1] == "0") {
-        	def result = createEvent(name: "switch", value: "off")
-            log.debug "Off command was sent : Parse returned ${result?.descriptionText}"
-            return result
+    def resultMap = zigbee.getEvent(description)
+    if (resultMap) {
+        if ((resultMap.name == "level" && state.trigger == "setLevel") || resultMap.name != "level") {  //doing this to account for weird level reporting bug with GE Link Bulbs
+            sendEvent(resultMap)
         }
     }
-
-    def msg = zigbee.parse(description)
-
-	if (description?.startsWith("catchall:")) {
-		// log.trace msg
-		// log.trace "data: $msg.data"
-
-        def x = description[-4..-1]
-        // log.debug x
-
-        switch (x)
-        {
-
-        	case "0000":
-
-            	def result = createEvent(name: "switch", value: "off")
-            	log.debug "${result?.descriptionText}"
-           		return result
-                break
-
-            case "1000":
-
-            	def result = createEvent(name: "switch", value: "off")
-            	log.debug "${result?.descriptionText}"
-           		return result
-                break
-
-            case "0100":
-
-            	def result = createEvent(name: "switch", value: "on")
-            	log.debug "${result?.descriptionText}"
-           		return result
-                break
-
-            case "1001":
-
-            	def result = createEvent(name: "switch", value: "on")
-            	log.debug "${result?.descriptionText}"
-           		return result
-                break
-        }
+    else {
+        log.debug "DID NOT PARSE MESSAGE for description : $description"
+        log.debug zigbee.parseDescriptionAsMap(description)
     }
-
-    if (description?.startsWith("read attr")) {
-
-        // log.trace description[27..28]
-        // log.trace description[-2..-1]
-
-    	if (description[27..28] == "0A") {
-
-        	// log.debug description[-2..-1]
-        	def i = Math.round(convertHexToInt(description[-2..-1]) / 256 * 100 )
-			sendEvent( name: "level", value: i )
-        	sendEvent( name: "switch.setLevel", value: i) //added to help subscribers
-
-    	}
-
-    	else {
-
-    		if (description[-2..-1] == "00" && state.trigger == "setLevel") {
-        		// log.debug description[-2..-1]
-        		def i = Math.round(convertHexToInt(description[-2..-1]) / 256 * 100 )
-				sendEvent( name: "level", value: i )
-        		sendEvent( name: "switch.setLevel", value: i) //added to help subscribers
-        	}
-
-        	if (description[-2..-1] == state.lvl) {
-        		// log.debug description[-2..-1]
-        		def i = Math.round(convertHexToInt(description[-2..-1]) / 256 * 100 )
-				sendEvent( name: "level", value: i )
-        		sendEvent( name: "switch.setLevel", value: i) //added to help subscribers
-        	}
-
-    	}
-    }
-
 }
 
 def poll() {
-
-    [
-	"st rattr 0x${device.deviceNetworkId} 1 6 0", "delay 500",
-    "st rattr 0x${device.deviceNetworkId} 1 8 0", "delay 500",
-    "st wattr 0x${device.deviceNetworkId} 1 8 0x10 0x21 {${state?.dOnOff ?: '0000'}}"
+    def refreshCmds = [
+        "st wattr 0x${device.deviceNetworkId} 1 8 0x10 0x21 {${state?.dOnOff ?: '0000'}}", "delay 500"
     ]
 
+    return refreshCmds + zigbee.onOffRefresh() + zigbee.levelRefresh()
 }
 
 def updated() {
@@ -270,109 +186,63 @@ def updated() {
 }
 
 def on() {
-	state.lvl = "00"
     state.trigger = "on/off"
-
-    // log.debug "on()"
-	sendEvent(name: "switch", value: "on")
-	"st cmd 0x${device.deviceNetworkId} 1 6 1 {}"
+    zigbee.on()
 }
 
 def off() {
-	state.lvl = "00"
     state.trigger = "on/off"
-
-    // log.debug "off()"
-	sendEvent(name: "switch", value: "off")
-	"st cmd 0x${device.deviceNetworkId} 1 6 0 {}"
+    zigbee.off()
 }
 
 def refresh() {
-
-    [
-	"st rattr 0x${device.deviceNetworkId} 1 6 0", "delay 500",
-    "st rattr 0x${device.deviceNetworkId} 1 8 0", "delay 500",
-    "st wattr 0x${device.deviceNetworkId} 1 8 0x10 0x21 {${state?.dOnOff ?: '0000'}}"
+    def refreshCmds = [
+        "st wattr 0x${device.deviceNetworkId} 1 8 0x10 0x21 {${state?.dOnOff ?: '0000'}}", "delay 500"
     ]
-    poll()
 
+    return refreshCmds + zigbee.onOffRefresh() + zigbee.levelRefresh() + zigbee.onOffConfig()
 }
 
 def setLevel(value) {
-
-    def cmds = []
-	value = value as Integer
-	if (value == 0) {
-		sendEvent(name: "switch", value: "off")
-		cmds << "st cmd 0x${device.deviceNetworkId} 1 8 0 {0000 ${state.rate}}"
-	}
-	else if (device.latestValue("switch") == "off") {
-		sendEvent(name: "switch", value: "on")
-	}
-
-    sendEvent(name: "level", value: value)
-    value = (value * 255 / 100)
-    def level = hex(value);
-
     state.trigger = "setLevel"
-    state.lvl = "${level}"
-
+    def cmd
+    def delayForRefresh = 500
     if (dimRate && (state?.rate != null)) {
-    	cmds << "st cmd 0x${device.deviceNetworkId} 1 8 4 {${level} ${state.rate}}"
+        def computedRate = convertRateValue(state.rate)
+        cmd = zigbee.setLevel(value, computedRate)
+        delayForRefresh += computedRate * 100       //converting tenth of second to milliseconds
     }
     else {
-    	cmds << "st cmd 0x${device.deviceNetworkId} 1 8 4 {${level} 1500}"
+        cmd = zigbee.setLevel(value, 20)
+        delayForRefresh += 2000
     }
+    cmd + ["delay $delayForRefresh"] + zigbee.levelRefresh()
+}
 
-    log.debug cmds
-    cmds
+int convertRateValue(rate) {
+    int convertedRate = 0
+    switch (rate)
+    {
+        case "0000":
+            convertedRate = 0
+            break
+
+        case "1500":
+            convertedRate = 20      //0015 hex in int is 2.1
+            break
+
+        case "2500":
+            convertedRate = 35      //0025 hex in int is 3.7
+            break
+
+        case "3500":
+            convertedRate = 50      //0035 hex in int is 5.1
+            break
+    }
+    convertedRate
 }
 
 def configure() {
-
-	log.debug "Configuring Reporting and Bindings."
-	def configCmds = [
-
-        //Switch Reporting
-        "zcl global send-me-a-report 6 0 0x10 0 3600 {01}", "delay 500",
-        "send 0x${device.deviceNetworkId} 1 1", "delay 1000",
-
-        //Level Control Reporting
-        "zcl global send-me-a-report 8 0 0x20 5 3600 {0010}", "delay 200",
-        "send 0x${device.deviceNetworkId} 1 1", "delay 1500",
-
-        "zdo bind 0x${device.deviceNetworkId} 1 1 6 {${device.zigbeeId}} {}", "delay 1000",
-		"zdo bind 0x${device.deviceNetworkId} 1 1 8 {${device.zigbeeId}} {}", "delay 500",
-	]
-    return configCmds + refresh() // send refresh cmds as part of config
+    log.debug "Configuring Reporting and Bindings."
+    return zigbee.onOffConfig() + zigbee.onOffRefresh() + zigbee.levelRefresh()
 }
-
-private hex(value, width=2) {
-	def s = new BigInteger(Math.round(value).toString()).toString(16)
-	while (s.size() < width) {
-		s = "0" + s
-	}
-	s
-}
-
-private Integer convertHexToInt(hex) {
-	Integer.parseInt(hex,16)
-}
-
-private String swapEndianHex(String hex) {
-    reverseArray(hex.decodeHex()).encodeHex()
-}
-
-private byte[] reverseArray(byte[] array) {
-    int i = 0;
-    int j = array.length - 1;
-    byte tmp;
-    while (j > i) {
-        tmp = array[j];
-        array[j] = array[i];
-        array[i] = tmp;
-        j--;
-        i++;
-    }
-    return array
-}

devicetypes/smartthings/hue-bulb.src/hue-bulb.groovy

@@ -1,4 +1,3 @@
-
 /**
  *  Hue Bulb
  *
@@ -11,13 +10,14 @@ metadata {
 		capability "Switch Level"
 		capability "Actuator"
 		capability "Color Control"
+		capability "Color Temperature"
 		capability "Switch"
 		capability "Refresh"
 		capability "Sensor"
 
 		command "setAdjustedColor"
-		command "reset"
-		command "refresh"
+        command "reset"
+        command "refresh"
 	}
 
 	simulator {
@@ -25,7 +25,7 @@ metadata {
 	}
 
 	tiles (scale: 2){
-		multiAttributeTile(name:"switch", type: "lighting", width: 6, height: 4, canChangeIcon: true){
+		multiAttributeTile(name:"rich-control", type: "lighting", width: 6, height: 4, canChangeIcon: true){
 			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
 				attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
 				attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
@@ -33,23 +33,58 @@ metadata {
 				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
 			}
 			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
-				attributeState "level", action:"switch level.setLevel"
+				attributeState "level", action:"switch level.setLevel", range:"(0..100)"
+            }
+            tileAttribute ("device.level", key: "SECONDARY_CONTROL") {
+	            attributeState "level", label: 'Level ${currentValue}%'
 			}
 			tileAttribute ("device.color", key: "COLOR_CONTROL") {
 				attributeState "color", action:"setAdjustedColor"
 			}
 		}
 
-		standardTile("reset", "device.reset", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
+			state "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+			state "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+			state "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+			state "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+		}
+
+        controlTile("colorTempSliderControl", "device.colorTemperature", "slider", width: 4, height: 2, inactiveLabel: false, range:"(2000..6500)") {
+            state "colorTemperature", action:"color temperature.setColorTemperature"
+        }
+        valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "colorTemperature", label: '${currentValue} K'
+        }
+
+		standardTile("reset", "device.reset", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
 			state "default", label:"Reset Color", action:"reset", icon:"st.lights.philips.hue-single"
 		}
-		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+		standardTile("refresh", "device.switch", height: 2, width: 2, inactiveLabel: false, decoration: "flat") {
 			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
-	}
+		controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 2, inactiveLabel: false, range:"(0..100)") {
+			state "level", action:"switch level.setLevel"
+		}
+		valueTile("level", "device.level", inactiveLabel: false, decoration: "flat") {
+			state "level", label: 'Level ${currentValue}%'
+		}
+		controlTile("saturationSliderControl", "device.saturation", "slider", height: 1, width: 2, inactiveLabel: false) {
+			state "saturation", action:"color control.setSaturation"
+		}
+		valueTile("saturation", "device.saturation", inactiveLabel: false, decoration: "flat") {
+			state "saturation", label: 'Sat ${currentValue}    '
+		}
+		controlTile("hueSliderControl", "device.hue", "slider", height: 1, width: 2, inactiveLabel: false) {
+			state "hue", action:"color control.setHue"
+		}
+		valueTile("hue", "device.hue", inactiveLabel: false, decoration: "flat") {
+			state "hue", label: 'Hue ${currentValue}   '
+		}
 
-	main(["switch"])
-	details(["switch", "levelSliderControl", "rgbSelector", "refresh", "reset"])
+		main(["switch"])
+		details(["rich-control", "colorTempSliderControl", "colorTemp", "reset", "refresh"])
+	}
 }
 
 // parse events into attributes
@@ -119,19 +154,27 @@ void setColor(value) {
 
 void reset() {
 	log.debug "Executing 'reset'"
-	def value = [level:100, hex:"#90C638", saturation:56, hue:23]
-	setAdjustedColor(value)
+    def value = [level:100, hex:"#90C638", saturation:56, hue:23]
+    setAdjustedColor(value)
 	parent.poll()
 }
 
 void setAdjustedColor(value) {
 	if (value) {
-		log.trace "setAdjustedColor: ${value}"
-		def adjusted = value + [:]
-		adjusted.hue = adjustOutgoingHue(value.hue)
-		// Needed because color picker always sends 100
-		adjusted.level = null
-		setColor(adjusted)
+        log.trace "setAdjustedColor: ${value}"
+        def adjusted = value + [:]
+        adjusted.hue = adjustOutgoingHue(value.hue)
+        // Needed because color picker always sends 100
+        adjusted.level = null
+        setColor(adjusted)
+    }
+}
+
+void setColorTemperature(value) {
+	if (value) {
+        log.trace "setColorTemperature: ${value}k"
+        parent.setColorTemperature(this, value)
+        sendEvent(name: "colorTemperature", value: value)
 	}
 }
 

devicetypes/smartthings/hue-lux-bulb.src/hue-lux-bulb.groovy

@@ -13,47 +13,47 @@ metadata {
 		capability "Refresh"
 		capability "Sensor"
 
-		command "refresh"
+        command "refresh"
 	}
 
 	simulator {
 		// TODO: define status and reply messages here
 	}
 
-	tiles(scale: 2) {
-		multiAttributeTile(name:"rich-control", type: "lighting", canChangeIcon: true){
-			tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
-				attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
-				attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-				attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
-				attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+    tiles(scale: 2) {
+        multiAttributeTile(name:"rich-control", type: "lighting", canChangeIcon: true){
+            tileAttribute ("device.switch", key: "PRIMARY_CONTROL") {
+              attributeState "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+              attributeState "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+              attributeState "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
+              attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
+            }
+            tileAttribute ("device.level", key: "SLIDER_CONTROL") {
+              attributeState "level", action:"switch level.setLevel", range:"(0..100)"
+            }
+            tileAttribute ("device.level", key: "SECONDARY_CONTROL") {
+	            attributeState "level", label: 'Level ${currentValue}%'
 			}
-			tileAttribute ("device.level", key: "SLIDER_CONTROL") {
-				attributeState "level", action:"switch level.setLevel", range:"(0..100)"
-			}
-			tileAttribute ("device.level", key: "SECONDARY_CONTROL") {
-				attributeState "level", label: 'Level ${currentValue}%'
-			}
-		}
+        }
 
 		standardTile("switch", "device.switch", width: 2, height: 2, canChangeIcon: true) {
 			state "on", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
 			state "off", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
 			state "turningOn", label:'${name}', action:"switch.off", icon:"st.lights.philips.hue-single", backgroundColor:"#79b821", nextState:"turningOff"
 			state "turningOff", label:'${name}', action:"switch.on", icon:"st.lights.philips.hue-single", backgroundColor:"#ffffff", nextState:"turningOn"
-		}
+        }
 
-		controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 2, inactiveLabel: false, range:"(0..100)") {
-			state "level", action:"switch level.setLevel"
-		}
+        controlTile("levelSliderControl", "device.level", "slider", height: 1, width: 2, inactiveLabel: false, range:"(0..100)") {
+            state "level", action:"switch level.setLevel"
+        }
 
-		standardTile("refresh", "device.switch", inactiveLabel: false, height: 2, width: 2, decoration: "flat") {
-			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
-		}
+        standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+            state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
+        }
 
-		main(["switch"])
-		details(["rich-control", "refresh"])
-	}
+        main(["switch"])
+        details(["rich-control", "refresh"])
+    }
 }
 
 // parse events into attributes

devicetypes/smartthings/mobile-presence.src/i18n/messages.properties

@@ -19,13 +19,14 @@
 #
 # Change History:
 #	1. 20160205 TW Initial release with informal Korean translation.
+#	2. 20160224 TW Updated with formal Korean translation.
 #==============================================================================
 # Korean (ko)
 # Device Preferences
 '''Give your device a name'''.ko=기기 이름 바꾸기
-'''Set Device Image'''.ko=디바이스 이미지 설정
+'''Set Device Image'''.ko=기기 이미지 설정
 # Events / Notifications
-'''{{ linkText }} has left'''.ko={{ linkText }}님이 나갔습니다
-'''{{ linkText }} has arrived'''.ko={{ linkText }}님이 도착했습니다
+'''{{ linkText }} has left'''.ko={{ linkText }}집을 나갔습니다.
+'''{{ linkText }} has arrived'''.ko={{ linkText }}집에 도착했습니다.
 '''present'''.ko=집안
-'''not present'''.ko=부재중
+'''not present'''.ko=외출

devicetypes/smartthings/mobile-presence.src/mobile-presence.groovy

@@ -1,16 +1,28 @@
-/**
- *  Copyright 2015 SmartThings
+/*
+===============================================================================
+ *  Copyright 2016 SmartThings
  *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not
+ *  use this file except in compliance with the License. You may obtain a copy 
+ *  of the License at:
  *
  *      http://www.apache.org/licenses/LICENSE-2.0
  *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
+ *  Unless required by applicable law or agreed to in writing, software 
+ *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT 
+ *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the 
+ *  License for the specific language governing permissions and limitations 
+ *  under the License.
+===============================================================================
+ *  Purpose: Mobile Presence DTH File
  *
+ *  Filename: mobile-presence.src/mobile-presence.groovy
+ *
+ *  Change History:
+ *  1. 20160205 TW - Update/Edit to support i18n translations
+===============================================================================
  */
+ 
 metadata {
 	definition (name: "Mobile Presence", namespace: "smartthings", author: "SmartThings") {
 		capability "Presence Sensor"
@@ -41,6 +53,7 @@ def parse(String description) {
 	def isStateChange = isStateChange(device, name, value)
 
 	def results = [
+    	translatable: true,
 		name: name,
 		value: value,
 		unit: null,
@@ -72,8 +85,8 @@ private String parseValue(String description) {
 
 private parseDescriptionText(String linkText, String value, String description) {
 	switch(value) {
-		case "present": return "$linkText has arrived"
-		case "not present": return "$linkText has left"
+		case "present": return "{{ linkText }} has arrived"
+		case "not present": return "{{ linkText }} has left"
 		default: return value
 	}
 }
@@ -84,4 +97,4 @@ private getState(String value) {
 		case "not present": return "left"
 		default: return value
 	}
-}
+}

devicetypes/smartthings/smartpower-outlet.src/i18n/messages.properties

@@ -0,0 +1,30 @@
+#==============================================================================
+#  Copyright 2016 SmartThings
+#
+#  Licensed under the Apache License, Version 2.0 (the "License"); you may not 
+#  use this file except in compliance with the License. You may obtain a copy 
+#  of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+#  Unless required by applicable law or agreed to in writing, software 
+#  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT 
+#  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the 
+#  License for the specific language governing permissions and limitations 
+#  under the License.
+#==============================================================================
+# Purpose: SmartPower Outlet i18n Translation File
+#
+# Filename: SmartPower-Outlet.src/i18n/messages.properties
+#
+# Change History:
+#	1. 20160116 TW Initial release with informal Korean translation.
+#==============================================================================
+# Korean (ko)
+# Device Preferences
+'''Give your device a name'''.ko=기기 이름 바꾸기
+# Events descriptionText
+'''{{ device.displayName }} is On'''.ko={{ device.displayName }}켜졌습니다.
+'''{{ device.displayName }} is Off'''.ko={{ device.displayName }}꺼졌습니다.
+'''{{ device.displayName }} power is {{ value }} Watts'''.ko={{ device.displayName }} 전원은 {{ value }}와트입니다
+#==============================================================================

devicetypes/smartthings/smartpower-outlet.src/smartpower-outlet.groovy

@@ -1,20 +1,28 @@
-/**
- *  Copyright 2015 SmartThings
+/*
+===============================================================================
+ *  Copyright 2016 SmartThings
  *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not
+ *  use this file except in compliance with the License. You may obtain a copy 
+ *  of the License at:
  *
  *      http://www.apache.org/licenses/LICENSE-2.0
  *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
+ *  Unless required by applicable law or agreed to in writing, software 
+ *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT 
+ *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the 
+ *  License for the specific language governing permissions and limitations 
+ *  under the License.
+===============================================================================
+ *  Purpose: SmartPower Outlet DTH File
  *
- *	SmartPower Outlet (CentraLite)
+ *  Filename: SmartPower-Outlet.src/SmartPower-Outlet.groovy
  *
- *	Author: SmartThings
- *	Date: 2015-08-23
+ *  Change History:
+ *  1. 20160117 TW - Update/Edit to support i18n translations
+===============================================================================
  */
+
 metadata {
 	// Automatically generated. Make future change here.
 	definition (name: "SmartPower Outlet", namespace: "smartthings", author: "SmartThings") {
@@ -91,22 +99,24 @@ def parse(String description) {
 		finalResult = getPowerDescription(zigbee.parseDescriptionAsMap(description))
 
 	if (finalResult) {
-		log.info finalResult
+		log.info "final result = $finalResult"
 		if (finalResult.type == "update") {
 			log.info "$device updates: ${finalResult.value}"
 		}
 		else if (finalResult.type == "power") {
-			def powerValue = (finalResult.value as Integer)/10
-			sendEvent(name: "power", value: powerValue)
+			def value = (finalResult.value as Integer)/10
+			createEvent(name: "power", value: value, descriptionText: '{{ device.displayName }} power is {{ value }} Watts', translatable: true )
 			/*
 				Dividing by 10 as the Divisor is 10000 and unit is kW for the device. AttrId: 0302 and 0300. Simplifying to 10
-
 				power level is an integer. The exact power level with correct units needs to be handled in the device type
 				to account for the different Divisor value (AttrId: 0302) and POWER Unit (AttrId: 0300). CLUSTER for simple metering is 0702
 			*/
 		}
 		else {
-			sendEvent(name: finalResult.type, value: finalResult.value)
+        	if ( finalResult.value == "on" )
+				createEvent(name: finalResult.type, value: finalResult.value, descriptionText: '{{ device.displayName }} is On', translatable: true)
+            else
+            	createEvent(name: finalResult.type, value: finalResult.value, descriptionText: '{{ device.displayName }} is Off', translatable: true)
 		}
 	}
 	else {
@@ -167,4 +177,4 @@ def getPowerDescription(descMap) {
 	else {
 		return [:]
 	}
-}
+}

devicetypes/smartthings/smartsense-moisture-sensor.src/i18n/messages.properties

@@ -1,14 +1,40 @@
-
-# Generated on Wed Feb 24 14:28:26 CST 2016 by dylan
-'''Adjust temperature by this many degrees'''.ko=몇 도씩 온도를 조절하십시오
-'''Degrees'''.ko=온도
-'''Temperature Offset'''.ko=온도 직접 설정
-'''This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter '-5'. If 3 degrees too cold, enter '+3'.'''.ko=기준 온도를 원하는대로 몇 도 올리거나 내려서 설정할 수 있습니다. 
-'''battery'''.ko=배터리
+#==============================================================================
+#  Copyright 2016 SmartThings
+#
+#  Licensed under the Apache License, Version 2.0 (the "License"); you may not 
+#  use this file except in compliance with the License. You may obtain a copy 
+#  of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+#  Unless required by applicable law or agreed to in writing, software 
+#  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT 
+#  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the 
+#  License for the specific language governing permissions and limitations 
+#  under the License.
+#==============================================================================
+# Purpose: SmartSense Moisture Sensor i18n Translation File
+#
+# Filename: SmartSense-Moisture-Sensor.src/i18n/messages.properties
+#
+# Change History:
+#	1. 20160116 TW Initial release with formal Korean translation.
+#==============================================================================
+# Korean (ko)
+# Device Preferences
 '''dry'''.ko=건조
 '''wet'''.ko=누수
-'''{{ device.displayName }} battery has too much power: (> 3.5) volts.'''.ko={{ device.displayName }} 배터리 전력이 너무 높습니다(3.5볼트 초과).
-'''{{ device.displayName }} battery was {{ value }}'''.ko={{ device.displayName }} 배터리가 {{ value }}였습니다
-'''{{ device.displayName }} is {{ value | translate }}'''.ko={{ device.displayName }}이(가) {{ value | translate }}입니다
+'''battery'''.ko=배터리
+'''Temperature Offset'''.ko=온도 직접 설정
+'''This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter '-5'. If 3 degrees too cold, enter '+3'.'''.ko=기준 온도를 원하는대로 몇 도 올리거나 내려서 설정할 수 있습니다.
+'''Degrees'''.ko=온도
+'''Adjust temperature by this many degrees'''.ko=몇 도씩 온도를 조절하십시오
+'''Give your device a name'''.ko=기기 이름 바꾸기
+# Events descriptionText
+'''{{ device.displayName }} is dry'''.ko={{ device.displayName }}가 건조
+'''{{ device.displayName }} is wet'''.ko={{ device.displayName }}누수
 '''{{ device.displayName }} was {{ value }}°C'''.ko={{ device.displayName }}이(가) {{ value }}°C였습니다
 '''{{ device.displayName }} was {{ value }}°F'''.ko={{ device.displayName }}이(가) {{ value }}°F였습니다
+'''{{ device.displayName }} battery has too much power: (> 3.5) volts.'''.ko={{ device.displayName }} 배터리 전력이 너무 높습니다(3.5볼트 초과).
+'''{{ device.displayName }} battery was {{ value }}'''.ko={{ device.displayName }}남아있는 배터리는 {{ value }}입니다.
+#==============================================================================

devicetypes/smartthings/smartsense-moisture-sensor.src/smartsense-moisture-sensor.groovy

@@ -1,18 +1,29 @@
-/**
- *  SmartSense Moisture Sensor
+/*
+===============================================================================
+ *  Copyright 2016 SmartThings
  *
- *  Copyright 2014 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not
+ *  use this file except in compliance with the License. You may obtain a copy 
+ *  of the License at:
  *
  *      http://www.apache.org/licenses/LICENSE-2.0
  *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
+ *  Unless required by applicable law or agreed to in writing, software 
+ *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT 
+ *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the 
+ *  License for the specific language governing permissions and limitations 
+ *  under the License.
+===============================================================================
+ *  Purpose: SmartSense Moisture Sensor DTH File
  *
+ *  Filename: SmartSense-Moisture-Sensor.src/SmartSense-Moisture-Sensor.groovy
+ *
+ *  Change History:
+ *  1. 20160116 TW - Update/Edit to support i18n translations
+ *  2. 20160125 TW = Incorporated new battery mapping from TM
+===============================================================================
  */
+
 metadata {
 	definition (name: "SmartSense Moisture Sensor",namespace: "smartthings", author: "SmartThings") {
 		capability "Configuration"
@@ -20,18 +31,17 @@ metadata {
 		capability "Refresh"
 		capability "Temperature Measurement"
 		capability "Water Sensor"
-
-		command "enrollResponse"
-
+        
+        command "enrollResponse"
 
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3315-S", deviceJoinName: "Water Leak Sensor"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3315"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite",  model: "3315-Seu", deviceJoinName: "Water Leak Sensor"
 		fingerprint inClusters: "0000,0001,0003,000F,0020,0402,0500", outClusters: "0019", manufacturer: "SmartThings", model: "moisturev4", deviceJoinName: "Water Leak Sensor"
 	}
-
+ 
 	simulator {
-
+ 
 	}
 
 	preferences {
@@ -43,11 +53,11 @@ metadata {
 				])
 		}
 		section {
-			input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
+			input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter '-5'. If 3 degrees too cold, enter '+3'.", displayDuringSetup: false, type: "paragraph", element: "paragraph"
 			input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
 		}
 	}
-
+ 
 	tiles(scale: 2) {
 		multiAttributeTile(name:"water", type: "generic", width: 6, height: 4){
 			tileAttribute ("device.water", key: "PRIMARY_CONTROL") {
@@ -56,7 +66,7 @@ metadata {
 			}
 		}
 		valueTile("temperature", "device.temperature", inactiveLabel: false, width: 2, height: 2) {
-			state "temperature", label:'${currentValue}°',
+			state "temperature", label:'${currentValue}°',
 				backgroundColors:[
 					[value: 31, color: "#153591"],
 					[value: 44, color: "#1e9cbb"],
@@ -78,7 +88,7 @@ metadata {
 		details(["water", "temperature", "battery", "refresh"])
 	}
 }
-
+ 
 def parse(String description) {
 	log.debug "description: $description"
 
@@ -92,59 +102,59 @@ def parse(String description) {
 	else if (description?.startsWith('temperature: ')) {
 		map = parseCustomMessage(description)
 	}
-	else if (description?.startsWith('zone status')) {
-		map = parseIasMessage(description)
-	}
-
+    else if (description?.startsWith('zone status')) {
+	    map = parseIasMessage(description)
+    }
+ 
 	log.debug "Parse returned $map"
 	def result = map ? createEvent(map) : null
-
-	if (description?.startsWith('enroll request')) {
-		List cmds = enrollResponse()
-		log.debug "enroll response: ${cmds}"
-		result = cmds?.collect { new physicalgraph.device.HubAction(it) }
-	}
-	return result
+    
+    if (description?.startsWith('enroll request')) {
+    	List cmds = enrollResponse()
+        log.debug "enroll response: ${cmds}"
+        result = cmds?.collect { new physicalgraph.device.HubAction(it) }
+    }
+    return result
 }
-
+ 
 private Map parseCatchAllMessage(String description) {
-	Map resultMap = [:]
-	def cluster = zigbee.parse(description)
-	if (shouldProcessMessage(cluster)) {
-		switch(cluster.clusterId) {
-			case 0x0001:
-				resultMap = getBatteryResult(cluster.data.last())
-				break
+    Map resultMap = [:]
+    def cluster = zigbee.parse(description)
+    if (shouldProcessMessage(cluster)) {
+        switch(cluster.clusterId) {
+            case 0x0001:
+            	resultMap = getBatteryResult(cluster.data.last())
+                break
 
-			case 0x0402:
-				// temp is last 2 data values. reverse to swap endian
-				String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
-				def value = getTemperature(temp)
-				resultMap = getTemperatureResult(value)
-				break
-		}
-	}
+            case 0x0402:
+                // temp is last 2 data values. reverse to swap endian
+                String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+                def value = getTemperature(temp)
+                resultMap = getTemperatureResult(value)
+                break
+        }
+    }
 
-	return resultMap
+    return resultMap
 }
 
 private boolean shouldProcessMessage(cluster) {
-	// 0x0B is default response indicating message got through
-	// 0x07 is bind message
-	boolean ignoredMessage = cluster.profileId != 0x0104 ||
-		cluster.command == 0x0B ||
-		cluster.command == 0x07 ||
-		(cluster.data.size() > 0 && cluster.data.first() == 0x3e)
-	return !ignoredMessage
+    // 0x0B is default response indicating message got through
+    // 0x07 is bind message
+    boolean ignoredMessage = cluster.profileId != 0x0104 || 
+        cluster.command == 0x0B ||
+        cluster.command == 0x07 ||
+        (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
+    return !ignoredMessage
 }
-
+ 
 private Map parseReportAttributeMessage(String description) {
 	Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
 		def nameAndValue = param.split(":")
 		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
 	}
 	log.debug "Desc Map: $descMap"
-
+ 
 	Map resultMap = [:]
 	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
 		def value = getTemperature(descMap.value)
@@ -153,10 +163,10 @@ private Map parseReportAttributeMessage(String description) {
 	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
 		resultMap = getBatteryResult(Integer.parseInt(descMap.value, 16))
 	}
-
+ 
 	return resultMap
 }
-
+ 
 private Map parseCustomMessage(String description) {
 	Map resultMap = [:]
 	if (description?.startsWith('temperature: ')) {
@@ -167,42 +177,42 @@ private Map parseCustomMessage(String description) {
 }
 
 private Map parseIasMessage(String description) {
-	List parsedMsg = description.split(' ')
-	String msgCode = parsedMsg[2]
+    List parsedMsg = description.split(' ')
+    String msgCode = parsedMsg[2]
+    
+    Map resultMap = [:]
+    switch(msgCode) {
+        case '0x0020': // Closed/No Motion/Dry
+        	resultMap = getMoistureResult('dry')
+            break
 
-	Map resultMap = [:]
-	switch(msgCode) {
-		case '0x0020': // Closed/No Motion/Dry
-			resultMap = getMoistureResult('dry')
-			break
+        case '0x0021': // Open/Motion/Wet
+        	resultMap = getMoistureResult('wet')
+            break
 
-		case '0x0021': // Open/Motion/Wet
-			resultMap = getMoistureResult('wet')
-			break
+        case '0x0022': // Tamper Alarm
+            break
 
-		case '0x0022': // Tamper Alarm
-			break
+        case '0x0023': // Battery Alarm
+            break
 
-		case '0x0023': // Battery Alarm
-			break
+        case '0x0024': // Supervision Report
+        	 log.debug 'dry with tamper alarm'
+        	resultMap = getMoistureResult('dry')
+            break
 
-		case '0x0024': // Supervision Report
-			 log.debug 'dry with tamper alarm'
-			resultMap = getMoistureResult('dry')
-			break
+        case '0x0025': // Restore Report
+        	log.debug 'water with tamper alarm'
+        	resultMap = getMoistureResult('wet')
+            break
 
-		case '0x0025': // Restore Report
-			log.debug 'water with tamper alarm'
-			resultMap = getMoistureResult('wet')
-			break
+        case '0x0026': // Trouble/Failure
+            break
 
-		case '0x0026': // Trouble/Failure
-			break
-
-		case '0x0028': // Test Mode
-			break
-	}
-	return resultMap
+        case '0x0028': // Test Mode
+            break
+    }
+    return resultMap
 }
 
 def getTemperature(value) {
@@ -220,7 +230,8 @@ private Map getBatteryResult(rawValue) {
 
 	def result = [
 		name: 'battery',
-		value: '--'
+		value: '--',
+		translatable: true
 	]
 
 	def volts = rawValue / 10
@@ -228,10 +239,10 @@ private Map getBatteryResult(rawValue) {
 	if (rawValue == 0 || rawValue == 255) {}
 	else {
 		if (volts > 3.5) {
-			result.descriptionText = "${linkText} battery has too much power (${volts} volts)."
+			result.descriptionText = "{{ device.displayName }} battery has too much power: (> 3.5) volts."
 		}
 		else {
-			if (device.getDataValue("manufacturer") == "SmartThings") {
+			if (device.getDataValue("manufacturer") == "SmartThings") {         
 				volts = rawValue // For the batteryMap to work the key needs to be an int
 				def batteryMap = [28:100, 27:100, 26:100, 25:90, 24:90, 23:70,
 								  22:70, 21:50, 20:50, 19:30, 18:30, 17:15, 16:1, 15:0]
@@ -245,7 +256,8 @@ private Map getBatteryResult(rawValue) {
 				def pct = batteryMap[volts]
 				if (pct != null) {
 					result.value = pct
-					result.descriptionText = "${linkText} battery was ${result.value}%"
+                    def value = pct
+					result.descriptionText = "{{ device.displayName }} battery was {{ value }}"
 				}
 			}
 			else {
@@ -253,44 +265,53 @@ private Map getBatteryResult(rawValue) {
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
 				result.value = Math.min(100, (int) pct * 100)
-				result.descriptionText = "${linkText} battery was ${result.value}%"
+				result.descriptionText = "{{ device.displayName }} battery was {{ value }}"
 			}
 		}
 	}
 
 	return result
 }
-
 private Map getTemperatureResult(value) {
 	log.debug 'TEMP'
-	def linkText = getLinkText(device)
 	if (tempOffset) {
 		def offset = tempOffset as int
 		def v = value as int
 		value = v + offset
 	}
-	def descriptionText = "${linkText} was ${value}°${temperatureScale}"
+    def descriptionText
+    if ( temperatureScale == 'C' )
+    	descriptionText = '{{ device.displayName }} was {{ value }}°C'
+    else
+    	descriptionText = '{{ device.displayName }} was {{ value }}°F'
+
 	return [
 		name: 'temperature',
 		value: value,
-		descriptionText: descriptionText
+		descriptionText: descriptionText,
+        translatable: true
 	]
 }
 
 private Map getMoistureResult(value) {
-	log.debug 'water'
-	String descriptionText = "${device.displayName} is ${value}"
+	log.debug "water" 
+    def descriptionText
+    if ( value == "wet" )
+    	descriptionText = '{{ device.displayName }} is wet'
+    else
+    	descriptionText = '{{ device.displayName }} is dry'
 	return [
 		name: 'water',
 		value: value,
-		descriptionText: descriptionText
+		descriptionText: descriptionText,
+        translatable: true
 	]
 }
 
 def refresh() {
 	log.debug "Refreshing Temperature and Battery"
 	def refreshCmds = [
-		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
+        "st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
 		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200"
 	]
 
@@ -300,32 +321,32 @@ def refresh() {
 def configure() {
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
 	log.debug "Configuring Reporting, IAS CIE, and Bindings."
-	def configCmds = [
+	def configCmds = [	
 		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 1", "delay 500",
 
 		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 500",
 		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}",		//checkin time 6 hrs
-		"send 0x${device.deviceNetworkId} 1 1", "delay 500",
+        "send 0x${device.deviceNetworkId} 1 1", "delay 500",
 
 		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x402 {${device.zigbeeId}} {}", "delay 500",
-		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}",
-		"send 0x${device.deviceNetworkId} 1 1", "delay 500"
+        "zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}",
+        "send 0x${device.deviceNetworkId} 1 1", "delay 500"
 	]
-	return configCmds + refresh() // send refresh cmds as part of config
+    return configCmds + refresh() // send refresh cmds as part of config
 }
 
 def enrollResponse() {
 	log.debug "Sending enroll response"
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
-	[
+    [
 		//Resending the CIE in case the enroll request is sent before CIE is written
 		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 		//Enroll Response
 		"raw 0x500 {01 23 00 00 00}",
 		"send 0x${device.deviceNetworkId} 1 1", "delay 200"
-	]
+    ]
 }
 
 private getEndpointId() {
@@ -337,19 +358,19 @@ private hex(value) {
 }
 
 private String swapEndianHex(String hex) {
-	reverseArray(hex.decodeHex()).encodeHex()
+    reverseArray(hex.decodeHex()).encodeHex()
 }
 
 private byte[] reverseArray(byte[] array) {
-	int i = 0;
-	int j = array.length - 1;
-	byte tmp;
-	while (j > i) {
-		tmp = array[j];
-		array[j] = array[i];
-		array[i] = tmp;
-		j--;
-		i++;
-	}
-	return array
-}
+    int i = 0;
+    int j = array.length - 1;
+    byte tmp;
+    while (j > i) {
+        tmp = array[j];
+        array[j] = array[i];
+        array[i] = tmp;
+        j--;
+        i++;
+    }
+    return array
+}

devicetypes/smartthings/smartsense-motion-sensor.src/i18n/messages.properties

@@ -1,13 +1,39 @@
-
-# Generated on Wed Feb 24 14:28:26 CST 2016 by dylan
-'''Adjust temperature by this many degrees'''.ko=몇 도씩 온도를 조절하십시오
-'''Degrees'''.ko=온도
-'''Temperature Offset'''.ko=온도 직접 설정
-'''This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter '-5'. If 3 degrees too cold, enter '+3'.'''.ko=기준 온도를 원하는대로 몇 도 올리거나 내려서 설정할 수 있습니다. 
+#==============================================================================
+#  Copyright 2016 SmartThings
+#
+#  Licensed under the Apache License, Version 2.0 (the "License"); you may not 
+#  use this file except in compliance with the License. You may obtain a copy 
+#  of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+#  Unless required by applicable law or agreed to in writing, software 
+#  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT 
+#  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the 
+#  License for the specific language governing permissions and limitations 
+#  under the License.
+#==============================================================================
+# Purpose: SmartSense Motion Sensor i18n Translation File
+#
+# Filename: SmartSense-Motion-Sensor.src/i18n/messages.properties
+#
+# Change History:
+#	1. 20160116 TW Initial release with formal Korean translation.
+#	2. 20160224 TW Updated formal Korean translations from Mike Stoller.
+#==============================================================================
+# Korean (ko)
+# Device Preferences
 '''battery'''.ko=배터리
-'''{{ device.displayName }} battery has too much power: (> 3.5) volts.'''.ko={{ device.displayName }} 배터리 전력이 너무 높습니다(3.5볼트 초과).
-'''{{ device.displayName }} battery was {{ value }}'''.ko={{ device.displayName }} 배터리가 {{ value }}였습니다
-'''{{ device.displayName }} detected motion'''.ko={{ device.displayName }}가 움직임을 감지하였습니다.
-'''{{ device.displayName }} motion has stopped'''.ko={{ device.displayName }} 동작이 중단되었습니다
-'''{{ device.displayName }} was {{ value }}°C'''.ko={{ device.displayName }}이(가) {{ value }}°C였습니다
+'''Temperature Offset'''.ko=온도 직접 설정
+'''This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter '-5'. If 3 degrees too cold, enter '+3'.'''.ko=기준 온도를 원하는대로 몇 도 올리거나 내려서 설정할 수 있습니다.
+'''Degrees'''.ko=온도
+'''Adjust temperature by this many degrees'''.ko=몇 도씩 온도를 조절하십시오
+'''Give your device a name'''.ko=기기 이름 바꾸기
+# Events descriptionText
+'''{{ device.displayName }} detected motion'''.ko={{ device.displayName }} 가 움직임을 감지하였습니다.
+'''{{ device.displayName }} motion has stopped'''.ko={{ device.displayName }}움직임이 중단되었습니다
+'''{{ device.displayName }} was {{ value }}°C'''.ko={{ device.displayName }}이(가){{ value }}°C였습니다.
 '''{{ device.displayName }} was {{ value }}°F'''.ko={{ device.displayName }}이(가) {{ value }}°F였습니다
+'''{{ device.displayName }} battery has too much power: (> 3.5) volts.'''.ko={{ device.displayName }} 배터리 전력이 너무 높습니다(3.5볼트 초과).
+'''{{ device.displayName }} battery was {{ value }}'''.ko={{ device.displayName }}남아있는 배터리는 {{ value }}입니다.
+#==============================================================================

devicetypes/smartthings/smartsense-motion-sensor.src/smartsense-motion-sensor.groovy

@@ -1,17 +1,27 @@
-/**
- *  SmartSense Motion/Temp Sensor
+/*
+===============================================================================
+ *  Copyright 2016 SmartThings
  *
- *  Copyright 2014 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not
+ *  use this file except in compliance with the License. You may obtain a copy 
+ *  of the License at:
  *
  *      http://www.apache.org/licenses/LICENSE-2.0
  *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
+ *  Unless required by applicable law or agreed to in writing, software 
+ *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT 
+ *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the 
+ *  License for the specific language governing permissions and limitations 
+ *  under the License.
+===============================================================================
+ *  Purpose: SmartSense Motion Sensor DTH File
  *
+ *  Filename: SmartSense-Motion-Sensor.src/SmartSense-Motion-Sensor.groovy
+ *
+ *  Change History:
+ *  1. 20160116 TW - Update/Edit to support i18n translations
+ *  2. 20160125 TW = Incorporated new battery mapping from TM
+===============================================================================
  */
 
 metadata {
@@ -19,18 +29,17 @@ metadata {
 		capability "Motion Sensor"
 		capability "Configuration"
 		capability "Battery"
-		capability "Temperature Measurement"
+        capability "Temperature Measurement"
 		capability "Refresh"
-
-		command "enrollResponse"
+        
+        command "enrollResponse"
 
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3305-S"
-		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3325-S", deviceJoinName: "Motion Sensor"
-		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3305"
-		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3325"
-		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3326"
-		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3326-L", deviceJoinName: "Iris Motion Sensor"
-		fingerprint inClusters: "0000,0001,0003,000F,0020,0402,0500", outClusters: "0019", manufacturer: "SmartThings", model: "motionv4", deviceJoinName: "Motion Sensor"
+        fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3325-S", deviceJoinName: "Motion Sensor"
+        fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3305"
+        fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3325"
+        fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3326"
+        fingerprint inClusters: "0000,0001,0003,000F,0020,0402,0500", outClusters: "0019", manufacturer: "SmartThings", model: "motionv4", deviceJoinName: "Motion Sensor"
 	}
 
 	simulator {
@@ -47,7 +56,7 @@ metadata {
 				])
 		}
 		section {
-			input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
+			input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter '-5'. If 3 degrees too cold, enter '+3'.", displayDuringSetup: false, type: "paragraph", element: "paragraph"
 			input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
 		}
 	}
@@ -86,7 +95,7 @@ metadata {
 
 def parse(String description) {
 	log.debug "description: $description"
-
+    
 	Map map = [:]
 	if (description?.startsWith('catchall:')) {
 		map = parseCatchAllMessage(description)
@@ -97,55 +106,55 @@ def parse(String description) {
 	else if (description?.startsWith('temperature: ')) {
 		map = parseCustomMessage(description)
 	}
-	else if (description?.startsWith('zone status')) {
-		map = parseIasMessage(description)
-	}
-
+    else if (description?.startsWith('zone status')) {
+	    map = parseIasMessage(description)
+    }
+ 
 	log.debug "Parse returned $map"
 	def result = map ? createEvent(map) : null
-
-	if (description?.startsWith('enroll request')) {
-		List cmds = enrollResponse()
-		log.debug "enroll response: ${cmds}"
-		result = cmds?.collect { new physicalgraph.device.HubAction(it) }
-	}
-	return result
+    
+    if (description?.startsWith('enroll request')) {
+    	List cmds = enrollResponse()
+        log.debug "enroll response: ${cmds}"
+        result = cmds?.collect { new physicalgraph.device.HubAction(it) }
+    }
+    return result
 }
 
 private Map parseCatchAllMessage(String description) {
-	Map resultMap = [:]
-	def cluster = zigbee.parse(description)
-	if (shouldProcessMessage(cluster)) {
-		switch(cluster.clusterId) {
-			case 0x0001:
-				resultMap = getBatteryResult(cluster.data.last())
-				break
+    Map resultMap = [:]
+    def cluster = zigbee.parse(description)
+    if (shouldProcessMessage(cluster)) {
+        switch(cluster.clusterId) {
+            case 0x0001:
+            	resultMap = getBatteryResult(cluster.data.last())
+                break
 
-			case 0x0402:
-				// temp is last 2 data values. reverse to swap endian
-				String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
-				def value = getTemperature(temp)
-				resultMap = getTemperatureResult(value)
-				break
+            case 0x0402:
+                // temp is last 2 data values. reverse to swap endian
+                String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+                def value = getTemperature(temp)
+                resultMap = getTemperatureResult(value)
+                break
 
 			case 0x0406:
-				log.debug 'motion'
-				resultMap.name = 'motion'
-				break
-		}
-	}
+            	log.debug 'motion'
+                resultMap.name = 'motion'
+                break
+        }
+    }
 
-	return resultMap
+    return resultMap
 }
 
 private boolean shouldProcessMessage(cluster) {
-	// 0x0B is default response indicating message got through
-	// 0x07 is bind message
-	boolean ignoredMessage = cluster.profileId != 0x0104 ||
-		cluster.command == 0x0B ||
-		cluster.command == 0x07 ||
-		(cluster.data.size() > 0 && cluster.data.first() == 0x3e)
-	return !ignoredMessage
+    // 0x0B is default response indicating message got through
+    // 0x07 is bind message
+    boolean ignoredMessage = cluster.profileId != 0x0104 || 
+        cluster.command == 0x0B ||
+        cluster.command == 0x07 ||
+        (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
+    return !ignoredMessage
 }
 
 private Map parseReportAttributeMessage(String description) {
@@ -154,7 +163,7 @@ private Map parseReportAttributeMessage(String description) {
 		map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
 	}
 	log.debug "Desc Map: $descMap"
-
+ 
 	Map resultMap = [:]
 	if (descMap.cluster == "0402" && descMap.attrId == "0000") {
 		def value = getTemperature(descMap.value)
@@ -163,14 +172,14 @@ private Map parseReportAttributeMessage(String description) {
 	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
 		resultMap = getBatteryResult(Integer.parseInt(descMap.value, 16))
 	}
-	else if (descMap.cluster == "0406" && descMap.attrId == "0000") {
-		def value = descMap.value.endsWith("01") ? "active" : "inactive"
-		resultMap = getMotionResult(value)
-	}
-
+    else if (descMap.cluster == "0406" && descMap.attrId == "0000") {
+    	def value = descMap.value.endsWith("01") ? "active" : "inactive"
+    	resultMap = getMotionResult(value)
+    } 
+ 
 	return resultMap
 }
-
+ 
 private Map parseCustomMessage(String description) {
 	Map resultMap = [:]
 	if (description?.startsWith('temperature: ')) {
@@ -181,44 +190,44 @@ private Map parseCustomMessage(String description) {
 }
 
 private Map parseIasMessage(String description) {
-	List parsedMsg = description.split(' ')
-	String msgCode = parsedMsg[2]
+    List parsedMsg = description.split(' ')
+    String msgCode = parsedMsg[2]
+    
+    Map resultMap = [:]
+    switch(msgCode) {
+        case '0x0020': // Closed/No Motion/Dry
+        	resultMap = getMotionResult('inactive')
+            break
 
-	Map resultMap = [:]
-	switch(msgCode) {
-		case '0x0020': // Closed/No Motion/Dry
-			resultMap = getMotionResult('inactive')
-			break
+        case '0x0021': // Open/Motion/Wet
+        	resultMap = getMotionResult('active')
+            break
 
-		case '0x0021': // Open/Motion/Wet
-			resultMap = getMotionResult('active')
-			break
+        case '0x0022': // Tamper Alarm
+        	log.debug 'motion with tamper alarm'
+        	resultMap = getMotionResult('active')
+            break
 
-		case '0x0022': // Tamper Alarm
-			log.debug 'motion with tamper alarm'
-			resultMap = getMotionResult('active')
-			break
+        case '0x0023': // Battery Alarm
+            break
 
-		case '0x0023': // Battery Alarm
-			break
+        case '0x0024': // Supervision Report
+        	log.debug 'no motion with tamper alarm'
+        	resultMap = getMotionResult('inactive')
+            break
 
-		case '0x0024': // Supervision Report
-			log.debug 'no motion with tamper alarm'
-			resultMap = getMotionResult('inactive')
-			break
+        case '0x0025': // Restore Report
+            break
 
-		case '0x0025': // Restore Report
-			break
+        case '0x0026': // Trouble/Failure
+        	log.debug 'motion with failure alarm'
+        	resultMap = getMotionResult('active')
+            break
 
-		case '0x0026': // Trouble/Failure
-			log.debug 'motion with failure alarm'
-			resultMap = getMotionResult('active')
-			break
-
-		case '0x0028': // Test Mode
-			break
-	}
-	return resultMap
+        case '0x0028': // Test Mode
+            break
+    }
+    return resultMap
 }
 
 def getTemperature(value) {
@@ -236,7 +245,8 @@ private Map getBatteryResult(rawValue) {
 
 	def result = [
 		name: 'battery',
-		value: '--'
+		value: '--',
+		translatable: true
 	]
 
 	def volts = rawValue / 10
@@ -244,10 +254,10 @@ private Map getBatteryResult(rawValue) {
 	if (rawValue == 0 || rawValue == 255) {}
 	else {
 		if (volts > 3.5) {
-			result.descriptionText = "${linkText} battery has too much power (${volts} volts)."
+			result.descriptionText = "{{ device.displayName }} battery has too much power: (> 3.5) volts."
 		}
 		else {
-			if (device.getDataValue("manufacturer") == "SmartThings") {
+			if (device.getDataValue("manufacturer") == "SmartThings") {         
 				volts = rawValue // For the batteryMap to work the key needs to be an int
 				def batteryMap = [28:100, 27:100, 26:100, 25:90, 24:90, 23:70,
 								  22:70, 21:50, 20:50, 19:30, 18:30, 17:15, 16:1, 15:0]
@@ -261,7 +271,8 @@ private Map getBatteryResult(rawValue) {
 				def pct = batteryMap[volts]
 				if (pct != null) {
 					result.value = pct
-					result.descriptionText = "${linkText} battery was ${result.value}%"
+                    def value = pct
+					result.descriptionText = "{{ device.displayName }} battery was {{ value }}"
 				}
 			}
 			else {
@@ -269,7 +280,7 @@ private Map getBatteryResult(rawValue) {
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
 				result.value = Math.min(100, (int) pct * 100)
-				result.descriptionText = "${linkText} battery was ${result.value}%"
+				result.descriptionText = "{{ device.displayName }} battery was {{ value }}"
 			}
 		}
 	}
@@ -279,33 +290,39 @@ private Map getBatteryResult(rawValue) {
 
 private Map getTemperatureResult(value) {
 	log.debug 'TEMP'
-	def linkText = getLinkText(device)
 	if (tempOffset) {
 		def offset = tempOffset as int
 		def v = value as int
 		value = v + offset
 	}
-	def descriptionText = "${linkText} was ${value}°${temperatureScale}"
+    def descriptionText
+    if ( temperatureScale == 'C' )
+    	descriptionText = '{{ device.displayName }} was {{ value }}°C'
+    else
+    	descriptionText = '{{ device.displayName }} was {{ value }}°F'
+
 	return [
 		name: 'temperature',
 		value: value,
-		descriptionText: descriptionText
+		descriptionText: descriptionText,
+        translatable: true
 	]
 }
 
 private Map getMotionResult(value) {
 	log.debug 'motion'
-	String linkText = getLinkText(device)
-	String descriptionText = value == 'active' ? "${linkText} detected motion" : "${linkText} motion has stopped"
+	String descriptionText = value == 'active' ? "{{ device.displayName }} detected motion" : "{{ device.displayName }} motion has stopped"
+    //String descriptionText = '{{ device.displayName }} is {{ value | translate }}'
 	return [
 		name: 'motion',
 		value: value,
-		descriptionText: descriptionText
+		descriptionText: descriptionText,
+        translatable: true
 	]
 }
 
 def refresh() {
-	log.debug "refresh called"
+	log.debug "refresh executed"
 	def refreshCmds = [
 		"st rattr 0x${device.deviceNetworkId} 1 0x402 0", "delay 200",
 		"st rattr 0x${device.deviceNetworkId} 1 1 0x20", "delay 200"
@@ -355,19 +372,19 @@ private hex(value) {
 }
 
 private String swapEndianHex(String hex) {
-	reverseArray(hex.decodeHex()).encodeHex()
+    reverseArray(hex.decodeHex()).encodeHex()
 }
 
 private byte[] reverseArray(byte[] array) {
-	int i = 0;
-	int j = array.length - 1;
-	byte tmp;
-	while (j > i) {
-		tmp = array[j];
-		array[j] = array[i];
-		array[i] = tmp;
-		j--;
-		i++;
-	}
-	return array
-}
+    int i = 0;
+    int j = array.length - 1;
+    byte tmp;
+    while (j > i) {
+        tmp = array[j];
+        array[j] = array[i];
+        array[i] = tmp;
+        j--;
+        i++;
+    }
+    return array
+}

devicetypes/smartthings/smartsense-motion-temp-sensor.src/smartsense-motion-temp-sensor.groovy

@@ -14,6 +14,8 @@
  *
  */
 
+//DEPRECATED - Using the smartsense-motion-sensor.groovy DTH for this device. Users need to be moved before deleting this DTH
+
 metadata {
 	definition (name: "SmartSense Motion/Temp Sensor", namespace: "smartthings", author: "SmartThings") {
 		capability "Motion Sensor"
@@ -25,10 +27,6 @@ metadata {
         
         command "enrollResponse"
 
-		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3305-S"
-        fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3305"
-        fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3325"
-        fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05", outClusters: "0019", manufacturer: "CentraLite", model: "3326"
 	}
 
 	simulator {
@@ -233,7 +231,7 @@ private Map getBatteryResult(rawValue) {
 	def volts = rawValue / 10
 	def descriptionText
 
-	if (rawValue == 0) {}
+    if (rawValue == 0 || rawValue == 255) {}
 	else {
 		if (volts > 3.5) {
 			result.descriptionText = "${linkText} battery has too much power (${volts} volts)."

devicetypes/smartthings/smartsense-multi-sensor.src/i18n/messages.properties

@@ -1,20 +1,46 @@
-
-# Generated on Wed Feb 24 14:28:26 CST 2016 by dylan
-'''Adjust temperature by this many degrees'''.ko=몇 도씩 온도를 조절하십시오
-'''Degrees'''.ko=온도
-'''Do you want to use this sensor on a garage door?'''.ko=차고 문의 센서 사용 설정하기
+#==============================================================================
+#  Copyright 2016 SmartThings
+#
+#  Licensed under the Apache License, Version 2.0 (the "License"); you may not 
+#  use this file except in compliance with the License. You may obtain a copy 
+#  of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+#  Unless required by applicable law or agreed to in writing, software 
+#  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT 
+#  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the 
+#  License for the specific language governing permissions and limitations 
+#  under the License.
+#==============================================================================
+# Purpose: SmartSense Multi Sensor i18n Translation File
+#
+# Filename: SmartSense-Multi-Sensor.src/i18n/messages.properties
+#
+# Change History:
+#	1. 20160117 TW Initial release with informal Korean translation.
+#==============================================================================
+# Korean (ko)
+# Device Preferences
+'''Yes'''.ko=예
 '''No'''.ko=아니요
-'''Tap to set'''.ko=눌러서 설정
+'''battery'''.ko=배터리
 '''Temperature Offset'''.ko=온도 직접 설정
 '''This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter '-5'. If 3 degrees too cold, enter '+3'.'''.ko=기준 온도를 원하는대로 몇 도 올리거나 내려서 설정할 수 있습니다.
+'''Degrees'''.ko=온도
+'''Adjust temperature by this many degrees'''.ko=몇 도씩 온도를 조절하십시오
+'''Do you want to use this sensor on a garage door?'''.ko=차고 문의 센서 사용 설정하기
+'''Tap to set'''.ko=눌러서 설정
+'''Give your device a name'''.ko=기기 이름 바꾸기
+# Events descriptionText
+'''{{ device.displayName }} was opened'''.ko={{ device.displayName }}열림을 감지하였습니다.
+'''{{ device.displayName }} was closed'''.ko={{ device.displayName }}닫혔습니다.
+'''{{ device.displayName }} was active'''.ko={{ device.displayName }}활성화되었습니다.
+'''{{ device.displayName }} was inactive'''.ko={{ device.displayName }}비활성화되었습니다.
+'''{{ device.displayName }} was {{ value }}°C'''.ko={{ device.displayName }}이(가){{ value }}°C였습니다.
+'''{{ device.displayName }} was {{ value }}°F'''.ko={{ device.displayName }}이(가) {{ value }}°F였습니다
+'''{{ device.displayName }} battery was {{ value }}'''.ko={{ device.displayName }}남아있는 배터리는 {{ value }}입니다.
 '''Updating device to garage sensor'''.ko=기기-차고 센서 업데이트 중
 '''Updating device to open/close sensor'''.ko=기기-열림/닫힘 센서 업데이트 중
-'''Yes'''.ko=예
 '''{{ device.displayName }} status was closed'''.ko={{ device.displayName }}은(는) 닫힌 상태입니다
 '''{{ device.displayName }} status was opened'''.ko={{ device.displayName }}은(는) 열린 상태입니다
-'''{{ device.displayName }} was active'''.ko={{ device.displayName }}이(가) 활성화되었습니다
-'''{{ device.displayName }} was closed'''.ko={{ device.displayName }}이(가) 닫혔습니다
-'''{{ device.displayName }} was inactive'''.ko={{ device.displayName }}이(가) 비활성화되었습니다
-'''{{ device.displayName }} was opened'''.ko={{ device.displayName }}이(가) 열렸습니다
-'''{{ device.displayName }} was {{ value }}°C'''.ko={{ device.displayName }}이(가) {{ value }}°C였습니다
-'''{{ device.displayName }} was {{ value }}°F'''.ko={{ device.displayName }}이(가) {{ value }}°F였습니다

devicetypes/smartthings/smartsense-multi-sensor.src/smartsense-multi-sensor.groovy

@@ -1,41 +1,50 @@
-/**
- *  SmartSense Multi
+/*
+===============================================================================
+ *  Copyright 2016 SmartThings
  *
- *  Copyright 2015 SmartThings
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not
+ *  use this file except in compliance with the License. You may obtain a copy 
+ *  of the License at:
  *
  *      http://www.apache.org/licenses/LICENSE-2.0
  *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
+ *  Unless required by applicable law or agreed to in writing, software 
+ *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT 
+ *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the 
+ *  License for the specific language governing permissions and limitations 
+ *  under the License.
+===============================================================================
+ *  Purpose: SmartSense Multi Sensor DTH File
  *
+ *  Filename: SmartSense-Multi-Sensor.src/SmartSense-Multi-Sensor.groovy
+ *
+ *  Change History:
+ *  1. 20160117 TW - Update/Edit to support i18n translations
+ *  2. 20160125 TW = Incorporated new battery mapping from TM
+===============================================================================
  */
 
-metadata {
-	definition (name: "SmartSense Multi Sensor", namespace: "smartthings", author: "SmartThings") {
-
-		capability "Three Axis"
+ metadata {
+ 	definition (name: "SmartSense Multi Sensor", namespace: "smartthings", author: "SmartThings") {
+        capability "Three Axis"
 		capability "Battery"
-		capability "Configuration"
-		capability "Sensor"
+ 		capability "Configuration"
+        capability "Sensor"
  		capability "Contact Sensor"
  		capability "Acceleration Sensor"
  		capability "Refresh"
  		capability "Temperature Measurement"
-
+        
  		command "enrollResponse"
  		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3320"
 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3321"
-		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3321-S", deviceJoinName: "Multipurpose Sensor"
-		fingerprint inClusters: "0000,0001,0003,000F,0020,0402,0500,FC02", outClusters: "0019", manufacturer: "SmartThings", model: "multiv4", deviceJoinName: "Multipurpose Sensor"
+        fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3321-S", deviceJoinName: "Multipurpose Sensor"
+        fingerprint inClusters: "0000,0001,0003,000F,0020,0402,0500,FC02", outClusters: "0019", manufacturer: "SmartThings", model: "multiv4", deviceJoinName: "Multipurpose Sensor"
 
 		attribute "status", "string"
-	}
+ 	}
 
-	simulator {
+ 	simulator {
 		status "open": "zone report :: type: 19 value: 0031"
 		status "closed": "zone report :: type: 19 value: 0030"
 
@@ -52,7 +61,7 @@ metadata {
 		status "x,y,z: 0,1000,0": "x: 0, y: 1000, z: 0"
 		status "x,y,z: 0,0,1000": "x: 0, y: 0, z: 1000"
 	}
-	preferences {
+ 	preferences {
 		section {
 			image(name: 'educationalcontent', multiple: true, images: [
 				"http://cdn.device-gse.smartthings.com/Multi/Multi1.jpg",
@@ -62,13 +71,13 @@ metadata {
 				])
 		}
 		section {
-			input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter \"-5\". If 3 degrees too cold, enter \"+3\".", displayDuringSetup: false, type: "paragraph", element: "paragraph"
+			input title: "Temperature Offset", description: "This feature allows you to correct any temperature variations by selecting an offset. Ex: If your sensor consistently reports a temp that's 5 degrees too warm, you'd enter '-5'. If 3 degrees too cold, enter '+3'.", displayDuringSetup: false, type: "paragraph", element: "paragraph"
 			input "tempOffset", "number", title: "Degrees", description: "Adjust temperature by this many degrees", range: "*..*", displayDuringSetup: false
 		}
 		section {
-			input("garageSensor", "enum", title: "Do you want to use this sensor on a garage door?", options: ["Yes", "No"], defaultValue: "No", required: false, displayDuringSetup: false)
+ 			input("garageSensor", "enum", title: "Do you want to use this sensor on a garage door?", translatable: true, description: "Tap to set", options: ["Yes","No"], defaultValue: "No", required: false, displayDuringSetup: false)
 		}
-	}
+ 	}
 
 	tiles(scale: 2) {
 		multiAttributeTile(name:"status", type: "generic", width: 6, height: 4){
@@ -100,16 +109,19 @@ metadata {
 				]
 			)
 		}
+		valueTile("3axis", "device.threeAxis", decoration: "flat", wordWrap: false, width: 2, height: 2) {
+			state("threeAxis", label:'${currentValue}', unit:"", backgroundColor:"#ffffff")
+		}
 		valueTile("battery", "device.battery", decoration: "flat", inactiveLabel: false, width: 2, height: 2) {
 			state "battery", label:'${currentValue}% battery', unit:""
 		}
-		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
-			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
-		}
+ 		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+ 			state "default", action:"refresh.refresh", icon:"st.secondary.refresh"
+ 		}
 
 
 		main(["status", "acceleration", "temperature"])
-		details(["status", "acceleration", "temperature", "battery", "refresh"])
+		details(["status", "acceleration", "temperature", "3axis", "battery", "refresh"])
 	}
  }
 
@@ -118,61 +130,61 @@ def parse(String description) {
 	if (description?.startsWith('catchall:')) {
 		map = parseCatchAllMessage(description)
 	}
-	else if (description?.startsWith('temperature: ')) {
+    else if (description?.startsWith('temperature: ')) {
 		map = parseCustomMessage(description)
 	}
 	else if (description?.startsWith('zone status')) {
 		map = parseIasMessage(description)
 	}
 
-	def result = map ? createEvent(map) : null
+ 	def result = map ? createEvent(map) : null
 
 	if (description?.startsWith('enroll request')) {
 		List cmds = enrollResponse()
 		log.debug "enroll response: ${cmds}"
 		result = cmds?.collect { new physicalgraph.device.HubAction(it) }
 	}
-	else if (description?.startsWith('read attr -')) {
-		result = parseReportAttributeMessage(description).each { createEvent(it) }
-	}
+    else if (description?.startsWith('read attr -')) {
+        result = parseReportAttributeMessage(description).each { createEvent(it) }
+    }
 	return result
 }
 
-private Map parseCatchAllMessage(String description) {
-	Map resultMap = [:]
-	def cluster = zigbee.parse(description)
-	log.debug cluster
-	if (shouldProcessMessage(cluster)) {
-		switch(cluster.clusterId) {
-			case 0x0001:
-			resultMap = getBatteryResult(cluster.data.last())
-			break
+ private Map parseCatchAllMessage(String description) {
+ 	Map resultMap = [:]
+ 	def cluster = zigbee.parse(description)
+    log.debug cluster
+ 	if (shouldProcessMessage(cluster)) {
+ 		switch(cluster.clusterId) {
+ 			case 0x0001:
+ 			resultMap = getBatteryResult(cluster.data.last())
+ 			break
 
-			case 0xFC02:
-			log.debug 'ACCELERATION'
-			break
+ 			case 0xFC02:
+            log.debug 'ACCELERATION'
+ 			break
 
-			case 0x0402:
-			log.debug 'TEMP'
-				// temp is last 2 data values. reverse to swap endian
-				String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
-				def value = getTemperature(temp)
-				resultMap = getTemperatureResult(value)
-				break
-		}
-	}
+ 			case 0x0402:
+ 			log.debug 'TEMP'
+                // temp is last 2 data values. reverse to swap endian
+                String temp = cluster.data[-2..-1].reverse().collect { cluster.hex1(it) }.join()
+                def value = getTemperature(temp)
+                resultMap = getTemperatureResult(value)
+                break
+            }
+        }
 
-	return resultMap
-}
+        return resultMap
+    }
 
 private boolean shouldProcessMessage(cluster) {
-	// 0x0B is default response indicating message got through
-	// 0x07 is bind message
-	boolean ignoredMessage = cluster.profileId != 0x0104 ||
-	cluster.command == 0x0B ||
-	cluster.command == 0x07 ||
-	(cluster.data.size() > 0 && cluster.data.first() == 0x3e)
-	return !ignoredMessage
+    // 0x0B is default response indicating message got through
+    // 0x07 is bind message
+    boolean ignoredMessage = cluster.profileId != 0x0104 ||
+    cluster.command == 0x0B ||
+    cluster.command == 0x07 ||
+    (cluster.data.size() > 0 && cluster.data.first() == 0x3e)
+    return !ignoredMessage
 }
 
 private List parseReportAttributeMessage(String description) {
@@ -199,12 +211,10 @@ private List parseReportAttributeMessage(String description) {
 			result << parseAxis(threeAxisAttributes)
 			descMap.value = descMap.value[-2..-1]
 		}
-		result << getAccelerationResult(descMap.value)
+        result << getAccelerationResult(descMap.value)
 	}
 	else if (descMap.cluster == "FC02" && descMap.attrId == "0012" && descMap.value.size() == 24) {
-		// The size is checked to ensure the attribute report contains X, Y and Z values
-		// If all three axis are not included then the attribute report is ignored
-		result << parseAxis(descMap.value)
+        result << parseAxis(descMap.value)
 	}
 	else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
 		result << getBatteryResult(Integer.parseInt(descMap.value, 16))
@@ -228,43 +238,43 @@ private Map parseIasMessage(String description) {
 
 	Map resultMap = [:]
 	switch(msgCode) {
-		case '0x0020': // Closed/No Motion/Dry
+        case '0x0020': // Closed/No Motion/Dry
 			if (garageSensor != "Yes"){
 				resultMap = getContactResult('closed')
 			}
-		break
+        break
 
-		case '0x0021': // Open/Motion/Wet
+        case '0x0021': // Open/Motion/Wet
 			if (garageSensor != "Yes"){
 				resultMap = getContactResult('open')
 			}
-		break
+        break
 
-		case '0x0022': // Tamper Alarm
-		break
+        case '0x0022': // Tamper Alarm
+        break
 
-		case '0x0023': // Battery Alarm
-		break
+        case '0x0023': // Battery Alarm
+        break
 
-		case '0x0024': // Supervision Report
+        case '0x0024': // Supervision Report
 			if (garageSensor != "Yes"){
 				resultMap = getContactResult('closed')
 			}
-		break
+        break
 
-		case '0x0025': // Restore Report
+        case '0x0025': // Restore Report
 			if (garageSensor != "Yes"){
 				resultMap = getContactResult('open')
 			}
-		break
+        break
 
-		case '0x0026': // Trouble/Failure
-		break
+        case '0x0026': // Trouble/Failure
+        break
 
-		case '0x0028': // Test Mode
-		break
-	}
-	return resultMap
+        case '0x0028': // Test Mode
+        break
+    }
+    return resultMap
 }
 
 def updated() {
@@ -273,19 +283,19 @@ def updated() {
 	if (garageSensor == "Yes") {
 		def descriptionText = "Updating device to garage sensor"
 		if (device.latestValue("status") == "open") {
-			sendEvent(name: 'status', value: 'garage-open', descriptionText: descriptionText)
+			sendEvent(name: 'status', value: 'garage-open', descriptionText: descriptionText, translatable: true)
 		}
 		else if (device.latestValue("status") == "closed") {
-			sendEvent(name: 'status', value: 'garage-closed', descriptionText: descriptionText)
+			sendEvent(name: 'status', value: 'garage-closed', descriptionText: descriptionText, translatable: true)
 		}
 	}
 	else {
 		def descriptionText = "Updating device to open/close sensor"
 		if (device.latestValue("status") == "garage-open") {
-			sendEvent(name: 'status', value: 'open', descriptionText: descriptionText)
+			sendEvent(name: 'status', value: 'open', descriptionText: descriptionText, translatable: true)
 		}
 		else if (device.latestValue("status") == "garage-closed") {
-			sendEvent(name: 'status', value: 'closed', descriptionText: descriptionText)
+			sendEvent(name: 'status', value: 'closed', descriptionText: descriptionText, translatable: true)
 		}
 	}
 }
@@ -305,7 +315,8 @@ private Map getBatteryResult(rawValue) {
 
 	def result = [
 		name: 'battery',
-		value: '--'
+		value: '--',
+		translatable: true
 	]
 
 	def volts = rawValue / 10
@@ -313,10 +324,10 @@ private Map getBatteryResult(rawValue) {
 	if (rawValue == 0 || rawValue == 255) {}
 	else {
 		if (volts > 3.5) {
-			result.descriptionText = "${linkText} battery has too much power (${volts} volts)."
+			result.descriptionText = "{{ device.displayName }} battery has too much power: (> 3.5) volts."
 		}
 		else {
-			if (device.getDataValue("manufacturer") == "SmartThings") {
+			if (device.getDataValue("manufacturer") == "SmartThings") {         
 				volts = rawValue // For the batteryMap to work the key needs to be an int
 				def batteryMap = [28:100, 27:100, 26:100, 25:90, 24:90, 23:70,
 								  22:70, 21:50, 20:50, 19:30, 18:30, 17:15, 16:1, 15:0]
@@ -330,7 +341,8 @@ private Map getBatteryResult(rawValue) {
 				def pct = batteryMap[volts]
 				if (pct != null) {
 					result.value = pct
-					result.descriptionText = "${linkText} battery was ${result.value}%"
+                    def value = pct
+					result.descriptionText = "{{ device.displayName }} battery was {{ value }}"
 				}
 			}
 			else {
@@ -338,7 +350,7 @@ private Map getBatteryResult(rawValue) {
 				def maxVolts = 3.0
 				def pct = (volts - minVolts) / (maxVolts - minVolts)
 				result.value = Math.min(100, (int) pct * 100)
-				result.descriptionText = "${linkText} battery was ${result.value}%"
+				result.descriptionText = "{{ device.displayName }} battery was {{ value }}"
 			}
 		}
 	}
@@ -347,41 +359,71 @@ private Map getBatteryResult(rawValue) {
 }
 
 private Map getTemperatureResult(value) {
-	log.debug "Temperature"
-	def linkText = getLinkText(device)
+	log.debug 'TEMP'
+    def name = "temperature"
 	if (tempOffset) {
 		def offset = tempOffset as int
 		def v = value as int
 		value = v + offset
 	}
-	def descriptionText = "${linkText} was ${value}°${temperatureScale}"
+    
+    def descriptionText
+    if ( temperatureScale == 'C' )
+    	descriptionText = '{{ device.displayName }} was {{ value }}°C'
+    else
+    	descriptionText = '{{ device.displayName }} was {{ value }}°F'
+
 	return [
-	name: 'temperature',
-	value: value,
-	descriptionText: descriptionText
+		name: name,
+		value: value,
+		descriptionText: descriptionText,
+        translatable: true
 	]
 }
 
 private Map getContactResult(value) {
-	log.debug "Contact"
-	def linkText = getLinkText(device)
-	def descriptionText = "${linkText} was ${value == 'open' ? 'opened' : 'closed'}"
-	sendEvent(name: 'contact', value: value, descriptionText: descriptionText, displayed:false)
-	sendEvent(name: 'status', value: value, descriptionText: descriptionText)
-}
-
-private getAccelerationResult(numValue) {
-	log.debug "Acceleration"
-	def name = "acceleration"
-	def value = numValue.endsWith("1") ? "active" : "inactive"
-	def linkText = getLinkText(device)
-	def descriptionText = "$linkText was $value"
-	def isStateChange = isStateChange(device, name, value)
-	[
+	log.debug "Contact: ${device.displayName} value = ${value}"
+    def name = "contact"
+    
+    def descriptionText    
+    if ( value == 'open' )    
+		descriptionText = '{{ device.displayName }} was opened'
+    else
+    	descriptionText = '{{ device.displayName }} was closed'
+        
+    sendEvent(name: 'status', value: value, descriptionText: descriptionText, displayed: false)
+    def isStateChange = isStateChange(device, name, value)
+	return [
 		name: name,
 		value: value,
 		descriptionText: descriptionText,
-		isStateChange: isStateChange
+        isStateChange: isStateChange,
+        translatable: true
+	]
+	
+}
+
+private getAccelerationResult(numValue) {
+	log.debug "Acceleration is $value"
+	def name = "acceleration"
+    def value
+    def descriptionText
+    
+	if ( numValue.endsWith("1") ) {
+    	value = "active"
+        descriptionText = '{{ device.displayName }} was active'
+    } else {
+    	value = "inactive"
+        descriptionText = '{{ device.displayName }} was inactive'
+    }
+
+	def isStateChange = isStateChange(device, name, value)
+	return [
+		name: name,
+		value: value,
+		descriptionText: descriptionText,
+		isStateChange: isStateChange,
+		translatable: true
 	]
 }
 
@@ -431,38 +473,37 @@ def refresh() {
 
 def configure() {
 	String zigbeeEui = swapEndianHex(device.hub.zigbeeEui)
-	log.debug "Configuring Reporting"
-
+	log.debug "Configuring Device Reporting"
+		
 	def configCmds = [
 		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
 		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 1 {${device.zigbeeId}} {}", "delay 200",
-		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}", "delay 200",		//checkin time 6 hrs
+		"zcl global send-me-a-report 1 0x20 0x20 30 21600 {01}",		//checkin time 6 hrs
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
 		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0x402 {${device.zigbeeId}} {}", "delay 200",
-		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}", "delay 200",
+		"zcl global send-me-a-report 0x402 0 0x29 30 3600 {6400}",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
 		"zdo bind 0x${device.deviceNetworkId} ${endpointId} 1 0xFC02 {${device.zigbeeId}} {}", "delay 200",
-		"zcl mfg-code ${manufacturerCode}", "delay 200",
-		"zcl global send-me-a-report 0xFC02 0x0010 0x18 10 3600 {01}", "delay 200",
+		"zcl mfg-code ${manufacturerCode}",
+		"zcl global send-me-a-report 0xFC02 0x0010 0x18 10 3600 {01}",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
-		"zcl mfg-code ${manufacturerCode}", "delay 200",
-		"zcl global send-me-a-report 0xFC02 0x0012 0x29 1 3600 {01}", "delay 200",
+		"zcl mfg-code ${manufacturerCode}",
+		"zcl global send-me-a-report 0xFC02 0x0012 0x29 1 3600 {01}",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
-		"zcl mfg-code ${manufacturerCode}", "delay 200",
-		"zcl global send-me-a-report 0xFC02 0x0013 0x29 1 3600 {01}", "delay 200",
+		"zcl mfg-code ${manufacturerCode}",
+		"zcl global send-me-a-report 0xFC02 0x0013 0x29 1 3600 {01}",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 
-		"zcl mfg-code ${manufacturerCode}", "delay 200",
-		"zcl global send-me-a-report 0xFC02 0x0014 0x29 1 3600 {01}", "delay 200",
+		"zcl mfg-code ${manufacturerCode}",
+		"zcl global send-me-a-report 0xFC02 0x0014 0x29 1 3600 {01}",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500"
-		]
-
+	]
 	return configCmds + refresh()
 }
 
@@ -478,12 +519,17 @@ def enrollResponse() {
 		"zcl global write 0x500 0x10 0xf0 {${zigbeeEui}}", "delay 200",
 		"send 0x${device.deviceNetworkId} 1 ${endpointId}", "delay 500",
 		//Enroll Response
-		"raw 0x500 {01 23 00 00 00}", "delay 200",
+		"raw 0x500 {01 23 00 00 00}",
 		"send 0x${device.deviceNetworkId} 1 1", "delay 200"
 	]
 }
 
 private Map parseAxis(String description) {
+	def hexToSignedInt = { hexVal ->
+		def unsignedVal = hexToInt(hexVal)
+		unsignedVal > 32767 ? unsignedVal - 65536 : unsignedVal
+	}
+
 	def z = hexToSignedInt(description[0..3])
 	def y = hexToSignedInt(description[10..13])
 	def x = hexToSignedInt(description[20..23])
@@ -510,11 +556,6 @@ private Map parseAxis(String description) {
 	getXyzResult(xyzResults, description)
 }
 
-private hexToSignedInt(hexVal) {
-	def unsignedVal = hexToInt(hexVal)
-	unsignedVal > 32767 ? unsignedVal - 65536 : unsignedVal
-}
-
 def garageEvent(zValue) {
 	def absValue = zValue.abs()
 	def contactValue = null
@@ -529,9 +570,14 @@ def garageEvent(zValue) {
 	}
 	if (contactValue != null){
 		def linkText = getLinkText(device)
-		def descriptionText = "${linkText} was ${contactValue == 'open' ? 'opened' : 'closed'}"
-		sendEvent(name: 'contact', value: contactValue, descriptionText: descriptionText, displayed:false)
-		sendEvent(name: 'status', value: garageValue, descriptionText: descriptionText)
+        if ( contactValue == 'open' ) {
+        	descriptionText: '{{ device.displayName }} was opened'
+            sendEvent(name: 'contact', value: contactValue, descriptionText: '{{ device.displayName }} was opened', displayed:false, translatable: true)
+            sendEvent(name: 'status', value: garageValue, descriptionText: '{{ device.displayName }} status was opened', translatable: true)
+        } else {
+			sendEvent(name: 'contact', value: contactValue, descriptionText: '{{ device.displayName }} was closed', displayed:false, translatable: true)
+            sendEvent(name: 'status', value: garageValue, descriptionText: '{{ device.displayName }} status was closed', translatable: true)
+        }
 	}
 }
 
@@ -586,4 +632,4 @@ private byte[] reverseArray(byte[] array) {
 		i++;
 	}
 	return array
-}
+}

devicetypes/smartthings/smartsense-multi.src/smartsense-multi.groovy

@@ -22,6 +22,8 @@ metadata {
 		capability "Battery"
 
 		fingerprint profileId: "FC01", deviceId: "0139"
+
+		attribute "status", "string"
 	}
 
 	simulator {
@@ -99,7 +101,7 @@ def parse(String description) {
 
 }
 
-private Map parseSingleMessage(description) {
+private List parseSingleMessage(description) {
 
 	def name = parseName(description)
 	def value = parseValue(description)
@@ -108,8 +110,9 @@ private Map parseSingleMessage(description) {
 	def handlerName = value == 'open' ? 'opened' : value
 	def isStateChange = isStateChange(device, name, value)
 
-	def results = [
-		name: name,
+	def results = []
+	results << createEvent(
+		name: "contact",
 		value: value,
 		unit: null,
 		linkText: linkText,
@@ -117,8 +120,18 @@ private Map parseSingleMessage(description) {
 		handlerName: handlerName,
 		isStateChange: isStateChange,
 		displayed: displayed(description, isStateChange)
-	]
-	log.debug "Parse results for $device: $results"
+	)
+
+	results << createEvent(
+		name: "status",
+		value: value,
+		unit: null,
+		linkText: linkText,
+		descriptionText: descriptionText,
+		handlerName: handlerName,
+		isStateChange: isStateChange,
+		displayed: displayed(description, isStateChange)
+	)
 
 	results
 }
@@ -269,7 +282,7 @@ private List parseRssiLqiMessage(String description) {
 	results
 }
 
-private getContactResult(part, description) {
+private List getContactResult(part, description) {
 	def name = "contact"
 	def value = part.endsWith("1") ? "open" : "closed"
 	def handlerName = value == 'open' ? 'opened' : value
@@ -277,16 +290,30 @@ private getContactResult(part, description) {
 	def descriptionText = "$linkText was $handlerName"
 	def isStateChange = isStateChange(device, name, value)
 
-	[
-		name: name,
-		value: value,
-		unit: null,
-		linkText: linkText,
-		descriptionText: descriptionText,
-		handlerName: handlerName,
-		isStateChange: isStateChange,
-		displayed: displayed(description, isStateChange)
-	]
+	def results = []
+	results << createEvent(
+			name: "contact",
+			value: value,
+			unit: null,
+			linkText: linkText,
+			descriptionText: descriptionText,
+			handlerName: handlerName,
+			isStateChange: isStateChange,
+			displayed:false
+	)
+
+	results << createEvent(
+			name: "status",
+			value: value,
+			unit: null,
+			linkText: linkText,
+			descriptionText: descriptionText,
+			handlerName: handlerName,
+			isStateChange: isStateChange,
+			displayed: displayed(description, isStateChange)
+	)
+
+	results
 }
 
 private getAccelerationResult(part, description) {
@@ -449,6 +476,7 @@ private Boolean isOrientationMessage(String description) {
 	description ==~ /x:.*y:.*z:.*rssi:.*lqi:.*/
 }
 
+//Note: Not using this method anymore
 private String parseName(String description) {
 	if (isSupportedDescription(description)) {
 		return "contact"

devicetypes/smartthings/smartsense-open-closed-accelerometer-sensor.src/smartsense-open-closed-accelerometer-sensor.groovy

@@ -13,6 +13,7 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
+//DEPRECATED - Using the smartsense-multi-sensor.groovy DTH for this device. Users need to be moved before deleting this DTH
 
  metadata {
  	definition (name: "SmartSense Open/Closed Accelerometer Sensor", namespace: "smartthings", author: "SmartThings") {
@@ -23,8 +24,7 @@
  		capability "Refresh"
  		capability "Temperature Measurement"
  		command "enrollResponse"
- 		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3320"
-		fingerprint inClusters: "0000,0001,0003,0402,0500,0020,0B05,FC02", outClusters: "0019", manufacturer: "CentraLite", model: "3321"
+
  	}
 
  	simulator {
@@ -225,7 +225,8 @@ def getTemperature(value) {
 
 		def volts = rawValue / 10
 		def descriptionText
-		if (volts > 3.5) {
+        if (rawValue == 0 || rawValue == 255) {}
+		else if (volts > 3.5) {
 			result.descriptionText = "${linkText} battery has too much power (${volts} volts)."
 		}
 		else {

devicetypes/smartthings/smartsense-open-closed-sensor.src/smartsense-open-closed-sensor.groovy

@@ -220,7 +220,8 @@ private Map getBatteryResult(rawValue) {
     
 	def volts = rawValue / 10
 	def descriptionText
-	if (volts > 3.5) {
+    if (rawValue == 0 || rawValue == 255) {}
+    else if (volts > 3.5) {
 		result.descriptionText = "${linkText} battery has too much power (${volts} volts)."
 	}
 	else {

devicetypes/smartthings/smartsense-temp-humidity-sensor.src/smartsense-temp-humidity-sensor.groovy

@@ -196,7 +196,8 @@ private Map getBatteryResult(rawValue) {
 
 	def volts = rawValue / 10
 	def descriptionText
-	if (volts > 3.5) {
+    if (rawValue == 0 || rawValue == 255) {}
+    else if (volts > 3.5) {
 		result.descriptionText = "${linkText} battery has too much power (${volts} volts)."
 	}
 	else {

devicetypes/smartthings/testing/simulated-thermostat.src/simulated-thermostat.groovy

@@ -32,14 +32,15 @@ metadata {
 				attributeState("default", label:'${currentValue}', unit:"dF")
 			}
 			tileAttribute("device.temperature", key: "VALUE_CONTROL") {
-				attributeState("default", action: "setTemperature")
+				attributeState("VALUE_UP", action: "tempUp")
+				attributeState("VALUE_DOWN", action: "tempDown")
 			}
 			tileAttribute("device.humidity", key: "SECONDARY_CONTROL") {
 				attributeState("default", label:'${currentValue}%', unit:"%")
 			}
 			tileAttribute("device.thermostatOperatingState", key: "OPERATING_STATE") {
 				attributeState("idle", backgroundColor:"#44b621")
-				attributeState("heating", backgroundColor:"#ffa81e")
+				attributeState("heating", backgroundColor:"#ea5462")
 				attributeState("cooling", backgroundColor:"#269bd2")
 			}
 			tileAttribute("device.thermostatMode", key: "THERMOSTAT_MODE") {

devicetypes/smartthings/zigbee-dimmer-power.src/zigbee-dimmer-power.groovy

@@ -44,7 +44,7 @@ metadata {
                 attributeState "power", label:'${currentValue} W'
             }
         }
-        standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+        standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
             state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
         }
         main "switch"

devicetypes/smartthings/zigbee-dimmer.src/zigbee-dimmer.groovy

@@ -39,7 +39,7 @@ metadata {
                 attributeState "level", action:"switch level.setLevel"
             }
         }
-        standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+        standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
             state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
         }
         main "switch"

devicetypes/smartthings/zigbee-hue-bulb.src/zigbee-hue-bulb.groovy

@@ -63,7 +63,7 @@ metadata {
 			state "turningOn", label:'${name}', action:"switch.off", icon:"st.switches.switch.on", backgroundColor:"#79b821", nextState:"turningOff"
 			state "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.switch.off", backgroundColor:"#ffffff", nextState:"turningOn"
 		}
-		standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat") {
+		standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat") {
 			state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
 		controlTile("rgbSelector", "device.color", "color", height: 3, width: 3, inactiveLabel: false) {

devicetypes/smartthings/zigbee-lock.src/zigbee-lock.groovy

@@ -52,7 +52,7 @@
 		valueTile("battery", "device.battery", inactiveLabel:false, decoration:"flat", width:2, height:2) {
 			state "battery", label:'${currentValue}% battery', unit:""
 		}
-		standardTile("refresh", "device.lock", inactiveLabel:false, decoration:"flat", width:2, height:2) {
+		standardTile("refresh", "device.refresh", inactiveLabel:false, decoration:"flat", width:2, height:2) {
 			state "default", label:'', action:"refresh.refresh", icon:"st.secondary.refresh"
 		}
 

devicetypes/smartthings/zigbee-rgbw-bulb.src/zigbee-rgbw-bulb.groovy

@@ -57,7 +57,7 @@ metadata {
         valueTile("colorTemp", "device.colorTemperature", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
             state "colorTemperature", label: '${currentValue} K'
         }
-        standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+        standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
             state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
         }
 

devicetypes/smartthings/zigbee-switch-power.src/zigbee-switch-power.groovy

@@ -40,7 +40,7 @@ metadata {
                 attributeState "power", label:'${currentValue} W'
             }
         }
-        standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+        standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
             state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
         }
         main "switch"

devicetypes/smartthings/zigbee-switch.src/zigbee-switch.groovy

@@ -42,7 +42,7 @@ metadata {
                 attributeState "turningOff", label:'${name}', action:"switch.on", icon:"st.switches.light.off", backgroundColor:"#ffffff", nextState:"turningOn"
             }
         }
-        standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+        standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
             state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
         }
         main "switch"

devicetypes/smartthings/zigbee-white-color-temperature-bulb.src/zigbee-white-color-temperature-bulb.groovy

@@ -54,7 +54,7 @@ metadata {
             }
         }
 
-        standardTile("refresh", "device.switch", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
+        standardTile("refresh", "device.refresh", inactiveLabel: false, decoration: "flat", width: 2, height: 2) {
             state "default", label:"", action:"refresh.refresh", icon:"st.secondary.refresh"
         }
 

smartapps/acrow311/controlled-power-off.src/controlled-power-off.groovy

@@ -1,65 +0,0 @@
-/**
- *  Controlled Power Off
- *
- *  Copyright 2016 Andrew Crow
- *
- *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
- *  in compliance with the License. You may obtain a copy of the License at:
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
- *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
- *  for the specific language governing permissions and limitations under the License.
- *
- */
-definition(
-    name: "Controlled Power Off",
-    namespace: "acrow311",
-    author: "Andrew Crow",
-    description: "Application used to power off devices that should be allowed to finish their cycle before being shut down such as air conditions and tankless water heaters.  Application will monitor electric usage and delay shutdown until usage has returned to inactive state.",
-    category: "My Apps",
-    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
-    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
-    iconX3Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience@2x.png",
-    oauth: true)
-
-
-preferences {
-	section("Shutdown when device not active") {
-		input(name: "meter", type: "capability.powerMeter", title: "When This Power Meter...", required: true, multiple: false, description: null)
-        input(name: "threshold", type: "number", title: "Reports Below...", required: true, description: "In watts, enter integer value")
-	}
-}
-
-def installed() {
-	log.debug "Installed with settings: ${settings}"
-	initialize()
-}
-
-def updated() {
-	log.debug "Updated with settings: ${settings}"
-	initialize()
-}
-
-def initialize() {
-	unsubscribe()
-	subscribe(meter, "power", meterHandler)
-}
-
-def meterHandler(evt) {
-    def meterValue = evt.value as double
-    def thresholdValue = threshold as int
-	def switchState = meter.currentValue("switch") == "on"  // Get current switch status (on = true)
-	
-    if (switchState) {  // If the switch is already off, do nothing
-        if (meterValue < thresholdValue) { // If the power consumption is low enough, turn off switch
-            log.info "${meter} reported energy ${meterValue} below ${threshold}. Turning off switch."
-            sendNotificationEvent("${meter} not running, shutting down.")
-            meter.off()
-        } else { // Power consumption too high - device connected to switch in use - do not shutdown.
-            sendNotificationEvent("Power consumption too high to shut off ${meter}.  Attempting again in a moment.")
-            log.info "${meter} reported energy ${meterValue} above ${threshold}. Leaving switch on."
-        }
-    }
-}

smartapps/com-obycode/beaconthings-manager.src/beaconthings-manager.groovy

@@ -0,0 +1,147 @@
+/**
+ *  BeaconThing Manager
+ *
+ *  Copyright 2015 obycode
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ */
+definition(
+    name: "BeaconThings Manager",
+    namespace: "com.obycode",
+    author: "obycode",
+    description: "SmartApp to interact with the BeaconThings iOS app. Use this app to integrate iBeacons into your smart home.",
+    category: "Convenience",
+    iconUrl: "http://beaconthingsapp.com/images/Icon-60.png",
+    iconX2Url: "http://beaconthingsapp.com/images/Icon-60@2x.png",
+    iconX3Url: "http://beaconthingsapp.com/images/Icon-60@3x.png",
+    oauth: true)
+
+
+preferences {
+	section("Allow BeaconThings to talk to your home") {
+
+	}
+}
+
+def installed() {
+  log.debug "Installed with settings: ${settings}"
+
+  initialize()
+}
+
+def initialize() {
+}
+
+def uninstalled() {
+  removeChildDevices(getChildDevices())
+}
+
+mappings {
+  path("/beacons") {
+    action: [
+    DELETE: "clearBeacons",
+    POST:   "addBeacon"
+    ]
+  }
+
+  path("/beacons/:id") {
+    action: [
+    PUT: "updateBeacon",
+    DELETE: "deleteBeacon"
+    ]
+  }
+}
+
+void clearBeacons() {
+  removeChildDevices(getChildDevices())
+}
+
+void addBeacon() {
+  def beacon = request.JSON?.beacon
+  if (beacon) {
+    def beaconId = "BeaconThings"
+    if (beacon.major) {
+      beaconId = "$beaconId-${beacon.major}"
+      if (beacon.minor) {
+        beaconId = "$beaconId-${beacon.minor}"
+      }
+    }
+    log.debug "adding beacon $beaconId"
+    def d = addChildDevice("com.obycode", "BeaconThing", beaconId,  null, [label:beacon.name, name:"BeaconThing", completedSetup: true])
+    log.debug "addChildDevice returned $d"
+
+    if (beacon.present) {
+      d.arrive(beacon.present)
+    }
+    else if (beacon.presence) {
+      d.setPresence(beacon.presence)
+    }
+  }
+}
+
+void updateBeacon() {
+  log.debug "updating beacon ${params.id}"
+  def beaconDevice = getChildDevice(params.id)
+  // def children = getChildDevices()
+  // def beaconDevice = children.find{ d -> d.deviceNetworkId == "${params.id}" }
+  if (!beaconDevice) {
+    log.debug "Beacon not found directly"
+    def children = getChildDevices()
+    beaconDevice = children.find{ d -> d.deviceNetworkId == "${params.id}" }
+    if (!beaconDevice) {
+      log.debug "Beacon not found in list either"
+      return
+    }
+  }
+
+  // This could be just updating the presence
+  def presence = request.JSON?.presence
+  if (presence) {
+    log.debug "Setting ${beaconDevice.label} to $presence"
+    beaconDevice.setPresence(presence)
+  }
+
+  // It could be someone arriving
+  def arrived = request.JSON?.arrived
+  if (arrived) {
+    log.debug "$arrived arrived at ${beaconDevice.label}"
+    beaconDevice.arrived(arrived)
+  }
+
+  // It could be someone left
+  def left = request.JSON?.left
+  if (left) {
+    log.debug "$left left ${beaconDevice.label}"
+    beaconDevice.left(left)
+  }
+
+  // or it could be updating the name
+  def beacon = request.JSON?.beacon
+  if (beacon) {
+    beaconDevice.label = beacon.name
+  }
+}
+
+void deleteBeacon() {
+  log.debug "deleting beacon ${params.id}"
+  deleteChildDevice(params.id)
+  // def children = getChildDevices()
+  // def beaconDevice = children.find{ d -> d.deviceNetworkId == "${params.id}" }
+  // if (beaconDevice) {
+  //   deleteChildDevice(beaconDevice.deviceNetworkId)
+  // }
+}
+
+private removeChildDevices(delete) {
+  delete.each {
+    deleteChildDevice(it.deviceNetworkId)
+  }
+}

smartapps/roomieremote-raconnect/simple-sync-connect.src/simple-sync-connect.groovy

@@ -0,0 +1,383 @@
+/**
+ *  Simple Sync Connect
+ *
+ *  Copyright 2015 Roomie Remote, Inc.
+ *
+ *	Date: 2015-09-22
+ */
+
+definition(
+    name: "Simple Sync Connect",
+    namespace: "roomieremote-raconnect",
+    author: "Roomie Remote, Inc.",
+    description: "Integrate SmartThings with your Simple Control activities via Simple Sync.",
+    category: "My Apps",
+    iconUrl: "https://s3.amazonaws.com/roomieuser/remotes/simplesync-60.png",
+    iconX2Url: "https://s3.amazonaws.com/roomieuser/remotes/simplesync-120.png",
+    iconX3Url: "https://s3.amazonaws.com/roomieuser/remotes/simplesync-120.png")
+
+preferences()
+{
+	page(name: "mainPage", title: "Simple Sync Setup", content: "mainPage", refreshTimeout: 5)
+    page(name:"agentDiscovery", title:"Simple Sync Discovery", content:"agentDiscovery", refreshTimeout:5)
+    page(name:"manualAgentEntry")
+    page(name:"verifyManualEntry")
+}
+
+def mainPage()
+{
+	if (canInstallLabs())
+    {
+       	return agentDiscovery()
+    }
+    else
+    {
+        def upgradeNeeded = """To use SmartThings Labs, your Hub should be completely up to date.
+
+To update your Hub, access Location Settings in the Main Menu (tap the gear next to your location name), select your Hub, and choose "Update Hub"."""
+
+        return dynamicPage(name:"mainPage", title:"Upgrade needed!", nextPage:"", install:false, uninstall: true) {
+            section("Upgrade")
+            {
+                paragraph "$upgradeNeeded"
+            }
+        }
+    }
+}
+
+def agentDiscovery(params=[:])
+{
+	int refreshCount = !state.refreshCount ? 0 : state.refreshCount as int
+    state.refreshCount = refreshCount + 1
+    def refreshInterval = refreshCount == 0 ? 2 : 5
+	
+    if (!state.subscribe)
+    {
+        subscribe(location, null, locationHandler, [filterEvents:false])
+        state.subscribe = true
+    }
+	
+    //ssdp request every fifth refresh
+    if ((refreshCount % 5) == 0)
+    {
+        discoverAgents()
+    }
+	
+    def agentsDiscovered = agentsDiscovered()
+    
+    return dynamicPage(name:"agentDiscovery", title:"Pair with Simple Sync", nextPage:"", refreshInterval: refreshInterval, install:true, uninstall: true) {
+        section("Pair with Simple Sync")
+        {
+            input "selectedAgent", "enum", required:true, title:"Select Simple Sync\n(${agentsDiscovered.size() ?: 0} found)", multiple:false, options:agentsDiscovered
+        	href(name:"manualAgentEntry",
+            	 title:"Manually Configure Simple Sync",
+                 required:false,
+                 page:"manualAgentEntry")
+        }
+    }
+}
+
+def manualAgentEntry()
+{
+	dynamicPage(name:"manualAgentEntry", title:"Manually Configure Simple Sync", nextPage:"verifyManualEntry", install:false, uninstall:true) {
+    	section("Manually Configure Simple Sync")
+        {
+        	paragraph "In the event that Simple Sync cannot be automatically discovered by your SmartThings hub, you may enter Simple Sync's IP address here."
+            input(name: "manualIPAddress", type: "text", title: "IP Address", required: true)
+        }
+    }
+}
+
+def verifyManualEntry()
+{
+    def hexIP = convertIPToHexString(manualIPAddress)
+    def hexPort = convertToHexString(47147)
+    def uuid = "593C03D2-1DA9-4CDB-A335-6C6DC98E56C3"
+    def hubId = ""
+    
+    for (hub in location.hubs)
+    {
+    	if (hub.localIP != null)
+        {
+        	hubId = hub.id
+            break
+        }
+    }
+    
+    def manualAgent = [deviceType: "04",
+    					mac: "unknown",
+    					ip: hexIP,
+                        port: hexPort,
+                        ssdpPath: "/upnp/Roomie.xml",
+                        ssdpUSN: "uuid:$uuid::urn:roomieremote-com:device:roomie:1",
+                        hub: hubId,
+                        verified: true,
+                        name: "Simple Sync $manualIPAddress"]
+	
+    state.agents[uuid] = manualAgent
+    
+    addOrUpdateAgent(state.agents[uuid])
+    
+    dynamicPage(name: "verifyManualEntry", title: "Manual Configuration Complete", nextPage: "", install:true, uninstall:true) {
+    	section("")
+        {
+        	paragraph("Tap Done to complete the installation process.")
+        }
+    }
+}
+
+def discoverAgents()
+{
+    def urn = getURN()
+    
+    sendHubCommand(new physicalgraph.device.HubAction("lan discovery $urn", physicalgraph.device.Protocol.LAN))
+}
+
+def agentsDiscovered()
+{
+    def gAgents = getAgents()
+    def agents = gAgents.findAll { it?.value?.verified == true }
+    def map = [:]
+    agents.each
+    {
+        map["${it.value.uuid}"] = it.value.name
+    }
+    map
+}
+
+def getAgents()
+{
+    if (!state.agents)
+    {
+    	state.agents = [:]
+    }
+    
+    state.agents
+}
+
+def installed()
+{
+	initialize()
+}
+
+def updated()
+{
+	initialize()
+}
+
+def initialize()
+{
+	if (state.subscribe)
+	{
+    	unsubscribe()
+		state.subscribe = false
+	}
+    
+    if (selectedAgent)
+    {
+    	addOrUpdateAgent(state.agents[selectedAgent])
+    }
+}
+
+def addOrUpdateAgent(agent)
+{
+	def children = getChildDevices()
+	def dni = agent.ip + ":" + agent.port
+    def found = false
+	
+	children.each
+	{
+		if ((it.getDeviceDataByName("mac") == agent.mac))
+		{
+        	found = true
+            
+            if (it.getDeviceNetworkId() != dni)
+            {
+				it.setDeviceNetworkId(dni)
+			}
+		}
+        else if (it.getDeviceNetworkId() == dni)
+        {
+        	found = true
+        }
+	}
+    
+	if (!found)
+	{
+        addChildDevice("roomieremote-agent", "Simple Sync", dni, agent.hub, [label: "Simple Sync"])
+	}
+}
+
+def locationHandler(evt)
+{
+    def description = evt?.description
+    def urn = getURN()
+    def hub = evt?.hubId
+    def parsedEvent = parseEventMessage(description)
+    
+    parsedEvent?.putAt("hub", hub)
+    
+    //SSDP DISCOVERY EVENTS
+	if (parsedEvent?.ssdpTerm?.contains(urn))
+	{
+        def agent = parsedEvent
+        def ip = convertHexToIP(agent.ip)
+        def agents = getAgents()
+        
+        agent.verified = true
+        agent.name = "Simple Sync $ip"
+        
+        if (!agents[agent.uuid])
+        {
+        	state.agents[agent.uuid] = agent
+        }
+    }
+}
+
+private def parseEventMessage(String description)
+{
+	def event = [:]
+	def parts = description.split(',')
+    
+	parts.each
+    { part ->
+		part = part.trim()
+		if (part.startsWith('devicetype:'))
+        {
+			def valueString = part.split(":")[1].trim()
+			event.devicetype = valueString
+		}
+		else if (part.startsWith('mac:'))
+        {
+			def valueString = part.split(":")[1].trim()
+			if (valueString)
+            {
+				event.mac = valueString
+			}
+		}
+		else if (part.startsWith('networkAddress:'))
+        {
+			def valueString = part.split(":")[1].trim()
+			if (valueString)
+            {
+				event.ip = valueString
+			}
+		}
+		else if (part.startsWith('deviceAddress:'))
+        {
+			def valueString = part.split(":")[1].trim()
+			if (valueString)
+            {
+				event.port = valueString
+			}
+		}
+		else if (part.startsWith('ssdpPath:'))
+        {
+			def valueString = part.split(":")[1].trim()
+			if (valueString)
+            {
+				event.ssdpPath = valueString
+			}
+		}
+		else if (part.startsWith('ssdpUSN:'))
+        {
+			part -= "ssdpUSN:"
+			def valueString = part.trim()
+			if (valueString)
+            {
+				event.ssdpUSN = valueString
+                
+                def uuid = getUUIDFromUSN(valueString)
+                
+                if (uuid)
+                {
+                	event.uuid = uuid
+                }
+			}
+		}
+		else if (part.startsWith('ssdpTerm:'))
+        {
+			part -= "ssdpTerm:"
+			def valueString = part.trim()
+			if (valueString)
+            {
+				event.ssdpTerm = valueString
+			}
+		}
+		else if (part.startsWith('headers'))
+        {
+			part -= "headers:"
+			def valueString = part.trim()
+			if (valueString)
+            {
+				event.headers = valueString
+			}
+		}
+		else if (part.startsWith('body'))
+        {
+			part -= "body:"
+			def valueString = part.trim()
+			if (valueString)
+            {
+				event.body = valueString
+			}
+		}
+	}
+
+	event
+}
+
+def getURN()
+{
+    return "urn:roomieremote-com:device:roomie:1"
+}
+
+def getUUIDFromUSN(usn)
+{
+	def parts = usn.split(":")
+	
+	for (int i = 0; i < parts.size(); ++i)
+	{
+		if (parts[i] == "uuid")
+		{
+			return parts[i + 1]
+		}
+	}
+}
+
+def String convertHexToIP(hex)
+{
+	[convertHexToInt(hex[0..1]),convertHexToInt(hex[2..3]),convertHexToInt(hex[4..5]),convertHexToInt(hex[6..7])].join(".")
+}
+
+def Integer convertHexToInt(hex)
+{
+	Integer.parseInt(hex,16)
+}
+
+def String convertToHexString(n)
+{
+	String hex = String.format("%X", n.toInteger())
+}
+
+def String convertIPToHexString(ipString)
+{
+	String hex = ipString.tokenize(".").collect {
+    	String.format("%02X", it.toInteger())
+    }.join()
+}
+
+def Boolean canInstallLabs()
+{
+    return hasAllHubsOver("000.011.00603")
+}
+
+def Boolean hasAllHubsOver(String desiredFirmware)
+{
+    return realHubFirmwareVersions.every { fw -> fw >= desiredFirmware }
+}
+
+def List getRealHubFirmwareVersions()
+{
+    return location.hubs*.firmwareVersionString.findAll { it }
+}

smartapps/roomieremote-ratrigger/simple-sync-trigger.src/simple-sync-trigger.groovy

@@ -0,0 +1,296 @@
+/**
+ *  Simple Sync Trigger
+ *
+ *  Copyright 2015 Roomie Remote, Inc.
+ *
+ *	Date: 2015-09-22
+ */
+definition(
+    name: "Simple Sync Trigger",
+    namespace: "roomieremote-ratrigger",
+    author: "Roomie Remote, Inc.",
+    description: "Trigger Simple Control activities when certain actions take place in your home.",
+    category: "My Apps",
+    iconUrl: "https://s3.amazonaws.com/roomieuser/remotes/simplesync-60.png",
+    iconX2Url: "https://s3.amazonaws.com/roomieuser/remotes/simplesync-120.png",
+    iconX3Url: "https://s3.amazonaws.com/roomieuser/remotes/simplesync-120.png")
+
+
+preferences {
+	page(name: "agentSelection", title: "Select your Simple Sync")
+	page(name: "refreshActivities", title: "Updating list of Simple Sync activities")
+    page(name: "control", title: "Run a Simple Control activity when something happens")
+	page(name: "timeIntervalInput", title: "Only during a certain time", install: true, uninstall: true) {
+		section {
+			input "starting", "time", title: "Starting", required: false
+			input "ending", "time", title: "Ending", required: false
+		}
+	}
+}
+
+def agentSelection()
+{
+	if (agent)
+    {
+		state.refreshCount = 0
+    }
+    
+	dynamicPage(name: "agentSelection", title: "Select your Simple Sync", nextPage: "control", install: false, uninstall: true) {
+		section {
+			input "agent", "capability.mediaController", title: "Simple Sync", required: true, multiple: false
+		}
+	}
+}
+
+def control()
+{
+	def activities = agent.latestValue('activities')
+    
+    if (!activities || !state.refreshCount)
+    {
+	    int refreshCount = !state.refreshCount ? 0 : state.refreshCount as int
+	    state.refreshCount = refreshCount + 1
+	    def refreshInterval = refreshCount == 0 ? 2 : 4
+		
+	    // Request activities every 5th attempt
+    	if((refreshCount % 5) == 0)
+        {
+    	    agent.getAllActivities()
+		}
+        
+        dynamicPage(name: "control", title: "Updating list of Simple Control activities", nextPage: "", refreshInterval: refreshInterval, install: false, uninstall: true) {
+        	section("") {
+            	paragraph "Retrieving activities from Simple Sync"
+            }
+        }
+	}
+	else
+    {
+	dynamicPage(name: "control", title: "Run a Simple Control activity when something happens", nextPage: "timeIntervalInput", install: false, uninstall: true) {
+		def anythingSet = anythingSet()
+		if (anythingSet) {
+			section("When..."){
+				ifSet "motion", "capability.motionSensor", title: "Motion Detected", required: false, multiple: true
+				ifSet "motionInactive", "capability.motionSensor", title: "Motion Stops", required: false, multiple: true
+				ifSet "contact", "capability.contactSensor", title: "Contact Opens", required: false, multiple: true
+				ifSet "contactClosed", "capability.contactSensor", title: "Contact Closes", required: false, multiple: true
+				ifSet "acceleration", "capability.accelerationSensor", title: "Acceleration Detected", required: false, multiple: true
+				ifSet "mySwitch", "capability.switch", title: "Switch Turned On", required: false, multiple: true
+				ifSet "mySwitchOff", "capability.switch", title: "Switch Turned Off", required: false, multiple: true
+				ifSet "arrivalPresence", "capability.presenceSensor", title: "Arrival Of", required: false, multiple: true
+				ifSet "departurePresence", "capability.presenceSensor", title: "Departure Of", required: false, multiple: true
+				ifSet "button1", "capability.button", title: "Button Press", required:false, multiple:true //remove from production
+				ifSet "triggerModes", "mode", title: "System Changes Mode", required: false, multiple: true
+				ifSet "timeOfDay", "time", title: "At a Scheduled Time", required: false
+			}
+		}
+		section(anythingSet ? "Select additional triggers" : "When...", hideable: anythingSet, hidden: true){
+			ifUnset "motion", "capability.motionSensor", title: "Motion Here", required: false, multiple: true
+			ifUnset "motionInactive", "capability.motionSensor", title: "Motion Stops", required: false, multiple: true
+			ifUnset "contact", "capability.contactSensor", title: "Contact Opens", required: false, multiple: true
+			ifUnset "contactClosed", "capability.contactSensor", title: "Contact Closes", required: false, multiple: true
+			ifUnset "acceleration", "capability.accelerationSensor", title: "Acceleration Detected", required: false, multiple: true
+			ifUnset "mySwitch", "capability.switch", title: "Switch Turned On", required: false, multiple: true
+			ifUnset "mySwitchOff", "capability.switch", title: "Switch Turned Off", required: false, multiple: true
+			ifUnset "arrivalPresence", "capability.presenceSensor", title: "Arrival Of", required: false, multiple: true
+			ifUnset "departurePresence", "capability.presenceSensor", title: "Departure Of", required: false, multiple: true
+			ifUnset "button1", "capability.button", title: "Button Press", required:false, multiple:true //remove from production
+			ifUnset "triggerModes", "mode", title: "System Changes Mode", required: false, multiple: true
+			ifUnset "timeOfDay", "time", title: "At a Scheduled Time", required: false
+		}
+		section("Run this activity"){
+	        input "activity", "enum", title: "Activity?", required: true, options: new groovy.json.JsonSlurper().parseText(activities ?: "[]").activities?.collect { ["${it.uuid}": it.name] }
+		}
+        
+		section("More options", hideable: true, hidden: true) {
+			input "frequency", "decimal", title: "Minimum time between actions (defaults to every event)", description: "Minutes", required: false
+			href "timeIntervalInput", title: "Only during a certain time", description: timeLabel ?: "Tap to set", state: timeLabel ? "complete" : "incomplete"
+			input "days", "enum", title: "Only on certain days of the week", multiple: true, required: false,
+				options: ["Monday", "Tuesday", "Wednesday", "Thursday", "Friday", "Saturday", "Sunday"]
+			input "modes", "mode", title: "Only when mode is", multiple: true, required: false
+			input "oncePerDay", "bool", title: "Only once per day", required: false, defaultValue: false
+		}
+		section([mobileOnly:true]) {
+			label title: "Assign a name", required: false
+			mode title: "Set for specific mode(s)"
+		}
+	}
+    }
+}
+
+private anythingSet() {
+	for (name in ["motion","motionInactive","contact","contactClosed","acceleration","mySwitch","mySwitchOff","arrivalPresence","departurePresence","button1","triggerModes","timeOfDay"]) {
+		if (settings[name]) {
+			return true
+		}
+	}
+	return false
+}
+
+private ifUnset(Map options, String name, String capability) {
+	if (!settings[name]) {
+		input(options, name, capability)
+	}
+}
+
+private ifSet(Map options, String name, String capability) {
+	if (settings[name]) {
+		input(options, name, capability)
+	}
+}
+
+def installed() {
+	subscribeToEvents()
+}
+
+def updated() {
+	unsubscribe()
+	unschedule()
+	subscribeToEvents()
+}
+
+def subscribeToEvents() {
+	log.trace "subscribeToEvents()"
+	subscribe(app, appTouchHandler)
+	subscribe(contact, "contact.open", eventHandler)
+	subscribe(contactClosed, "contact.closed", eventHandler)
+	subscribe(acceleration, "acceleration.active", eventHandler)
+	subscribe(motion, "motion.active", eventHandler)
+	subscribe(motionInactive, "motion.inactive", eventHandler)
+	subscribe(mySwitch, "switch.on", eventHandler)
+	subscribe(mySwitchOff, "switch.off", eventHandler)
+	subscribe(arrivalPresence, "presence.present", eventHandler)
+	subscribe(departurePresence, "presence.not present", eventHandler)
+	subscribe(button1, "button.pushed", eventHandler)
+
+	if (triggerModes) {
+		subscribe(location, modeChangeHandler)
+	}
+
+	if (timeOfDay) {
+		schedule(timeOfDay, scheduledTimeHandler)
+	}
+}
+
+def eventHandler(evt) {
+	if (allOk) {
+		def lastTime = state[frequencyKey(evt)]
+		if (oncePerDayOk(lastTime)) {
+			if (frequency) {
+				if (lastTime == null || now() - lastTime >= frequency * 60000) {
+					startActivity(evt)
+				}
+				else {
+					log.debug "Not taking action because $frequency minutes have not elapsed since last action"
+				}
+			}
+			else {
+				startActivity(evt)
+			}
+		}
+		else {
+			log.debug "Not taking action because it was already taken today"
+		}
+	}
+}
+
+def modeChangeHandler(evt) {
+	log.trace "modeChangeHandler $evt.name: $evt.value ($triggerModes)"
+	if (evt.value in triggerModes) {
+		eventHandler(evt)
+	}
+}
+
+def scheduledTimeHandler() {
+	eventHandler(null)
+}
+
+def appTouchHandler(evt) {
+	startActivity(evt)
+}
+
+private startActivity(evt) {
+	agent.startActivity(activity)
+
+	if (frequency) {
+		state.lastActionTimeStamp = now()
+	}
+}
+
+private frequencyKey(evt) {
+	//evt.deviceId ?: evt.value
+	"lastActionTimeStamp"
+}
+
+private dayString(Date date) {
+	def df = new java.text.SimpleDateFormat("yyyy-MM-dd")
+	if (location.timeZone) {
+		df.setTimeZone(location.timeZone)
+	}
+	else {
+		df.setTimeZone(TimeZone.getTimeZone("America/New_York"))
+	}
+	df.format(date)
+}
+
+private oncePerDayOk(Long lastTime) {
+	def result = true
+	if (oncePerDay) {
+		result = lastTime ? dayString(new Date()) != dayString(new Date(lastTime)) : true
+		log.trace "oncePerDayOk = $result"
+	}
+	result
+}
+
+// TODO - centralize somehow
+private getAllOk() {
+	modeOk && daysOk && timeOk
+}
+
+private getModeOk() {
+	def result = !modes || modes.contains(location.mode)
+	log.trace "modeOk = $result"
+	result
+}
+
+private getDaysOk() {
+	def result = true
+	if (days) {
+		def df = new java.text.SimpleDateFormat("EEEE")
+		if (location.timeZone) {
+			df.setTimeZone(location.timeZone)
+		}
+		else {
+			df.setTimeZone(TimeZone.getTimeZone("America/New_York"))
+		}
+		def day = df.format(new Date())
+		result = days.contains(day)
+	}
+	log.trace "daysOk = $result"
+	result
+}
+
+private getTimeOk() {
+	def result = true
+	if (starting && ending) {
+		def currTime = now()
+		def start = timeToday(starting).time
+		def stop = timeToday(ending).time
+		result = start < stop ? currTime >= start && currTime <= stop : currTime <= stop || currTime >= start
+	}
+	log.trace "timeOk = $result"
+	result
+}
+
+private hhmm(time, fmt = "h:mm a")
+{
+	def t = timeToday(time, location.timeZone)
+	def f = new java.text.SimpleDateFormat(fmt)
+	f.setTimeZone(location.timeZone ?: timeZone(time))
+	f.format(t)
+}
+
+private timeIntervalLabel()
+{
+	(starting && ending) ? hhmm(starting) + "-" + hhmm(ending, "h:mm a z") : ""
+}

smartapps/roomieremote-roomieconnect/simple-control.src/simple-control.groovy

@@ -0,0 +1,676 @@
+/**
+ *  Simple Control
+ *
+ *  Copyright 2015 Roomie Remote, Inc.
+ *
+ *	Date: 2015-09-22
+ */
+
+definition(
+    name: "Simple Control",
+    namespace: "roomieremote-roomieconnect",
+    author: "Roomie Remote, Inc.",
+    description: "Integrate SmartThings with your Simple Control activities.",
+    category: "My Apps",
+    iconUrl: "https://s3.amazonaws.com/roomieuser/remotes/simplesync-60.png",
+    iconX2Url: "https://s3.amazonaws.com/roomieuser/remotes/simplesync-120.png",
+    iconX3Url: "https://s3.amazonaws.com/roomieuser/remotes/simplesync-120.png")
+
+preferences()
+{
+	section("Allow Simple Control to Monitor and Control These Things...")
+    {
+    	input "switches", "capability.switch", title: "Which Switches?", multiple: true, required: false
+  	}
+	
+	page(name: "mainPage", title: "Simple Control Setup", content: "mainPage", refreshTimeout: 5)
+	page(name:"agentDiscovery", title:"Simple Sync Discovery", content:"agentDiscovery", refreshTimeout:5)
+	page(name:"manualAgentEntry")
+	page(name:"verifyManualEntry")
+}
+
+mappings {
+	path("/devices") {
+    	action: [
+        	GET: "getDevices",
+            POST: "handleDevicesWithIDs"
+        ]
+	}
+    path("/device/:id") {
+    	action: [
+        	GET: "getDevice",
+            POST: "updateDevice"
+        ]
+    }
+	path("/subscriptions") {
+		action: [
+			GET: "listSubscriptions",
+			POST: "addSubscription", // {"deviceId":"xxx", "attributeName":"xxx","callbackUrl":"http://..."}
+            DELETE: "removeAllSubscriptions"
+		]
+	}
+	path("/subscriptions/:id") {
+		action: [
+			DELETE: "removeSubscription"
+		]
+	}
+}
+
+private getAllDevices()
+{
+	//log.debug("getAllDevices()")
+	([] + switches + locks + thermostats + imageCaptures + relaySwitches + doorControls + colorControls + musicPlayers + speechSynthesizers + switchLevels + indicators + mediaControllers + tones + tvs + alarms + valves + motionSensors + presenceSensors + beacons + pushButtons + smokeDetectors + coDetectors + contactSensors + accelerationSensors + energyMeters + powerMeters + lightSensors + humiditySensors + temperatureSensors + speechRecognizers + stepSensors + touchSensors)?.findAll()?.unique { it.id }
+}
+
+def getDevices()
+{
+	//log.debug("getDevices, params: ${params}")
+    allDevices.collect {
+    	//log.debug("device: ${it}")
+		deviceItem(it)
+	}
+}
+
+def getDevice()
+{
+	//log.debug("getDevice, params: ${params}")
+    def device = allDevices.find { it.id == params.id }
+    if (!device)
+    {
+    	render status: 404, data: '{"msg": "Device not found"}'
+    }
+    else
+    {
+    	deviceItem(device)
+    }
+}
+
+def handleDevicesWithIDs()
+{
+	//log.debug("handleDevicesWithIDs, params: ${params}")
+	def data = request.JSON
+	def ids = data?.ids?.findAll()?.unique()
+    //log.debug("ids: ${ids}")
+    def command = data?.command
+	def arguments = data?.arguments
+    if (command)
+    {
+    	def success = false
+	    //log.debug("command ${command}, arguments ${arguments}")
+    	for (devId in ids)
+        {
+			def device = allDevices.find { it.id == devId }
+			if (device) {
+				if (arguments) {
+					device."$command"(*arguments)
+				} else {
+					device."$command"()
+				}
+				success = true
+			} else {
+            	//log.debug("device not found ${devId}")
+			}
+		}
+        
+        if (success)
+        {
+        	render status: 200, data: "{}"
+        }
+        else
+        {
+        	render status: 404, data: '{"msg": "Device not found"}'
+        }
+    }
+    else
+    {
+		ids.collect {
+    		def currentId = it
+    		def device = allDevices.find { it.id == currentId }
+        	if (device)
+        	{
+        		deviceItem(device)
+    	    }
+   		}
+	}
+}
+
+private deviceItem(device) {
+	[
+		id: device.id,
+		label: device.displayName,
+		currentState: device.currentStates,
+		capabilities: device.capabilities?.collect {[
+			name: it.name
+		]},
+		attributes: device.supportedAttributes?.collect {[
+			name: it.name,
+			dataType: it.dataType,
+			values: it.values
+		]},
+		commands: device.supportedCommands?.collect {[
+			name: it.name,
+			arguments: it.arguments
+		]},
+		type: [
+			name: device.typeName,
+			author: device.typeAuthor
+		]
+	]
+}
+
+def updateDevice()
+{
+	//log.debug("updateDevice, params: ${params}")
+	def data = request.JSON
+	def command = data?.command
+	def arguments = data?.arguments
+
+	//log.debug("updateDevice, params: ${params}, request: ${data}")
+	if (!command) {
+		render status: 400, data: '{"msg": "command is required"}'
+	} else {
+		def device = allDevices.find { it.id == params.id }
+		if (device) {
+			if (arguments) {
+				device."$command"(*arguments)
+			} else {
+				device."$command"()
+			}
+			render status: 204, data: "{}"
+		} else {
+			render status: 404, data: '{"msg": "Device not found"}'
+		}
+	}
+}
+
+def listSubscriptions()
+{
+	//log.debug "listSubscriptions()"
+	app.subscriptions?.findAll { it.deviceId }?.collect {
+		def deviceInfo = state[it.deviceId]
+		def response = [
+			id: it.id,
+			deviceId: it.deviceId,
+			attributeName: it.data,
+			handler: it.handler
+		]
+		//if (!selectedAgent) {
+			response.callbackUrl = deviceInfo?.callbackUrl
+		//}
+		response
+	} ?: []
+}
+
+def addSubscription() {
+	def data = request.JSON
+	def attribute = data.attributeName
+	def callbackUrl = data.callbackUrl
+
+	//log.debug "addSubscription, params: ${params}, request: ${data}"
+	if (!attribute) {
+		render status: 400, data: '{"msg": "attributeName is required"}'
+	} else {
+		def device = allDevices.find { it.id == data.deviceId }
+		if (device) {
+			//if (!selectedAgent) {
+				//log.debug "Adding callbackUrl: $callbackUrl"
+				state[device.id] = [callbackUrl: callbackUrl]
+			//}
+			//log.debug "Adding subscription"
+			def subscription = subscribe(device, attribute, deviceHandler)
+			if (!subscription || !subscription.eventSubscription) {
+            	//log.debug("subscriptions: ${app.subscriptions}")
+                //for (sub in app.subscriptions)
+                //{
+                	//log.debug("subscription.id ${sub.id} subscription.handler ${sub.handler} subscription.deviceId ${sub.deviceId}")
+                    //log.debug(sub.properties.collect{it}.join('\n'))
+				//}
+				subscription = app.subscriptions?.find { it.device.id == data.deviceId && it.data == attribute && it.handler == 'deviceHandler' }
+			}
+
+			def response = [
+				id: subscription.id,
+				deviceId: subscription.device?.id,
+				attributeName: subscription.data,
+				handler: subscription.handler
+			]
+			//if (!selectedAgent) {
+				response.callbackUrl = callbackUrl
+			//}
+			response
+		} else {
+			render status: 400, data: '{"msg": "Device not found"}'
+		}
+	}
+}
+
+def removeSubscription()
+{
+	def subscription = app.subscriptions?.find { it.id == params.id }
+	def device = subscription?.device
+
+	//log.debug "removeSubscription, params: ${params}, subscription: ${subscription}, device: ${device}"
+	if (device) {
+		//log.debug "Removing subscription for device: ${device.id}"
+		state.remove(device.id)
+		unsubscribe(device)
+	}
+	render status: 204, data: "{}"
+}
+
+def removeAllSubscriptions()
+{
+	for (sub in app.subscriptions)
+    {
+    	//log.debug("Subscription: ${sub}")
+        //log.debug(sub.properties.collect{it}.join('\n'))
+        def handler = sub.handler
+        def device = sub.device
+        
+    	if (device && handler == 'deviceHandler')
+        {
+	        //log.debug(device.properties.collect{it}.join('\n'))
+        	//log.debug("Removing subscription for device: ${device}")
+            state.remove(device.id)
+            unsubscribe(device)
+        }
+    }
+}
+
+def deviceHandler(evt) {
+	def deviceInfo = state[evt.deviceId]
+	//if (selectedAgent) {
+    //	sendToRoomie(evt, agentCallbackUrl)
+	//} else if (deviceInfo) {
+    if (deviceInfo)
+    {
+		if (deviceInfo.callbackUrl) {
+			sendToRoomie(evt, deviceInfo.callbackUrl)
+		} else {
+			log.warn "No callbackUrl set for device: ${evt.deviceId}"
+		}
+	} else {
+		log.warn "No subscribed device found for device: ${evt.deviceId}"
+	}
+}
+
+def sendToRoomie(evt, String callbackUrl) {
+	def callback = new URI(callbackUrl)
+	def host = callback.port != -1 ? "${callback.host}:${callback.port}" : callback.host
+	def path = callback.query ? "${callback.path}?${callback.query}".toString() : callback.path
+	sendHubCommand(new physicalgraph.device.HubAction(
+		method: "POST",
+		path: path,
+		headers: [
+			"Host": host,
+			"Content-Type": "application/json"
+		],
+		body: [evt: [deviceId: evt.deviceId, name: evt.name, value: evt.value]]
+	))
+}
+
+def mainPage()
+{
+	if (canInstallLabs())
+    {
+       	return agentDiscovery()
+    }
+    else
+    {
+        def upgradeNeeded = """To use SmartThings Labs, your Hub should be completely up to date.
+
+To update your Hub, access Location Settings in the Main Menu (tap the gear next to your location name), select your Hub, and choose "Update Hub"."""
+
+        return dynamicPage(name:"mainPage", title:"Upgrade needed!", nextPage:"", install:false, uninstall: true) {
+            section("Upgrade")
+            {
+                paragraph "$upgradeNeeded"
+            }
+        }
+    }
+}
+
+def agentDiscovery(params=[:])
+{
+	int refreshCount = !state.refreshCount ? 0 : state.refreshCount as int
+    state.refreshCount = refreshCount + 1
+    def refreshInterval = refreshCount == 0 ? 2 : 5
+	
+    if (!state.subscribe)
+    {
+        subscribe(location, null, locationHandler, [filterEvents:false])
+        state.subscribe = true
+    }
+	
+    //ssdp request every fifth refresh
+    if ((refreshCount % 5) == 0)
+    {
+        discoverAgents()
+    }
+	
+    def agentsDiscovered = agentsDiscovered()
+    
+    return dynamicPage(name:"agentDiscovery", title:"Pair with Simple Sync", nextPage:"", refreshInterval: refreshInterval, install:true, uninstall: true) {
+        section("Pair with Simple Sync")
+        {
+            input "selectedAgent", "enum", required:false, title:"Select Simple Sync\n(${agentsDiscovered.size() ?: 0} found)", multiple:false, options:agentsDiscovered
+        	href(name:"manualAgentEntry",
+            	 title:"Manually Configure Simple Sync",
+                 required:false,
+                 page:"manualAgentEntry")
+        }
+        section("Allow Simple Control to Monitor and Control These Things...")
+        {
+	    	input "switches", "capability.switch", title: "Which Switches?", multiple: true, required: false
+	  	}
+    }
+}
+
+def manualAgentEntry()
+{
+	dynamicPage(name:"manualAgentEntry", title:"Manually Configure Simple Sync", nextPage:"verifyManualEntry", install:false, uninstall:true) {
+    	section("Manually Configure Simple Sync")
+        {
+        	paragraph "In the event that Simple Sync cannot be automatically discovered by your SmartThings hub, you may enter Simple Sync's IP address here."
+            input(name: "manualIPAddress", type: "text", title: "IP Address", required: true)
+        }
+    }
+}
+
+def verifyManualEntry()
+{
+    def hexIP = convertIPToHexString(manualIPAddress)
+    def hexPort = convertToHexString(47147)
+    def uuid = "593C03D2-1DA9-4CDB-A335-6C6DC98E56C3"
+    def hubId = ""
+    
+    for (hub in location.hubs)
+    {
+    	if (hub.localIP != null)
+        {
+        	hubId = hub.id
+            break
+        }
+    }
+    
+    def manualAgent = [deviceType: "04",
+    					mac: "unknown",
+    					ip: hexIP,
+                        port: hexPort,
+                        ssdpPath: "/upnp/Roomie.xml",
+                        ssdpUSN: "uuid:$uuid::urn:roomieremote-com:device:roomie:1",
+                        hub: hubId,
+                        verified: true,
+                        name: "Simple Sync $manualIPAddress"]
+	
+    state.agents[uuid] = manualAgent
+    
+    addOrUpdateAgent(state.agents[uuid])
+    
+    dynamicPage(name: "verifyManualEntry", title: "Manual Configuration Complete", nextPage: "", install:true, uninstall:true) {
+    	section("")
+        {
+        	paragraph("Tap Done to complete the installation process.")
+        }
+    }
+}
+
+def discoverAgents()
+{
+    def urn = getURN()
+    
+    sendHubCommand(new physicalgraph.device.HubAction("lan discovery $urn", physicalgraph.device.Protocol.LAN))
+}
+
+def agentsDiscovered()
+{
+    def gAgents = getAgents()
+    def agents = gAgents.findAll { it?.value?.verified == true }
+    def map = [:]
+    agents.each
+    {
+        map["${it.value.uuid}"] = it.value.name
+    }
+    map
+}
+
+def getAgents()
+{
+    if (!state.agents)
+    {
+    	state.agents = [:]
+    }
+    
+    state.agents
+}
+
+def installed()
+{
+	initialize()
+}
+
+def updated()
+{
+	initialize()
+}
+
+def initialize()
+{
+	if (state.subscribe)
+	{
+    	unsubscribe()
+		state.subscribe = false
+	}
+    
+    if (selectedAgent)
+    {
+    	addOrUpdateAgent(state.agents[selectedAgent])
+    }
+}
+
+def addOrUpdateAgent(agent)
+{
+	def children = getChildDevices()
+	def dni = agent.ip + ":" + agent.port
+    def found = false
+	
+	children.each
+	{
+		if ((it.getDeviceDataByName("mac") == agent.mac))
+		{
+        	found = true
+            
+            if (it.getDeviceNetworkId() != dni)
+            {
+				it.setDeviceNetworkId(dni)
+			}
+		}
+        else if (it.getDeviceNetworkId() == dni)
+        {
+        	found = true
+        }
+	}
+    
+	if (!found)
+	{
+        addChildDevice("roomieremote-agent", "Simple Sync", dni, agent.hub, [label: "Simple Sync"])
+	}
+}
+
+def locationHandler(evt)
+{
+    def description = evt?.description
+    def urn = getURN()
+    def hub = evt?.hubId
+    def parsedEvent = parseEventMessage(description)
+    
+    parsedEvent?.putAt("hub", hub)
+    
+    //SSDP DISCOVERY EVENTS
+	if (parsedEvent?.ssdpTerm?.contains(urn))
+	{
+        def agent = parsedEvent
+        def ip = convertHexToIP(agent.ip)
+        def agents = getAgents()
+        
+        agent.verified = true
+        agent.name = "Simple Sync $ip"
+        
+        if (!agents[agent.uuid])
+        {
+        	state.agents[agent.uuid] = agent
+        }
+    }
+}
+
+private def parseEventMessage(String description)
+{
+	def event = [:]
+	def parts = description.split(',')
+    
+	parts.each
+    { part ->
+		part = part.trim()
+		if (part.startsWith('devicetype:'))
+        {
+			def valueString = part.split(":")[1].trim()
+			event.devicetype = valueString
+		}
+		else if (part.startsWith('mac:'))
+        {
+			def valueString = part.split(":")[1].trim()
+			if (valueString)
+            {
+				event.mac = valueString
+			}
+		}
+		else if (part.startsWith('networkAddress:'))
+        {
+			def valueString = part.split(":")[1].trim()
+			if (valueString)
+            {
+				event.ip = valueString
+			}
+		}
+		else if (part.startsWith('deviceAddress:'))
+        {
+			def valueString = part.split(":")[1].trim()
+			if (valueString)
+            {
+				event.port = valueString
+			}
+		}
+		else if (part.startsWith('ssdpPath:'))
+        {
+			def valueString = part.split(":")[1].trim()
+			if (valueString)
+            {
+				event.ssdpPath = valueString
+			}
+		}
+		else if (part.startsWith('ssdpUSN:'))
+        {
+			part -= "ssdpUSN:"
+			def valueString = part.trim()
+			if (valueString)
+            {
+				event.ssdpUSN = valueString
+                
+                def uuid = getUUIDFromUSN(valueString)
+                
+                if (uuid)
+                {
+                	event.uuid = uuid
+                }
+			}
+		}
+		else if (part.startsWith('ssdpTerm:'))
+        {
+			part -= "ssdpTerm:"
+			def valueString = part.trim()
+			if (valueString)
+            {
+				event.ssdpTerm = valueString
+			}
+		}
+		else if (part.startsWith('headers'))
+        {
+			part -= "headers:"
+			def valueString = part.trim()
+			if (valueString)
+            {
+				event.headers = valueString
+			}
+		}
+		else if (part.startsWith('body'))
+        {
+			part -= "body:"
+			def valueString = part.trim()
+			if (valueString)
+            {
+				event.body = valueString
+			}
+		}
+	}
+
+	event
+}
+
+def getURN()
+{
+    return "urn:roomieremote-com:device:roomie:1"
+}
+
+def getUUIDFromUSN(usn)
+{
+	def parts = usn.split(":")
+	
+	for (int i = 0; i < parts.size(); ++i)
+	{
+		if (parts[i] == "uuid")
+		{
+			return parts[i + 1]
+		}
+	}
+}
+
+def String convertHexToIP(hex)
+{
+	[convertHexToInt(hex[0..1]),convertHexToInt(hex[2..3]),convertHexToInt(hex[4..5]),convertHexToInt(hex[6..7])].join(".")
+}
+
+def Integer convertHexToInt(hex)
+{
+	Integer.parseInt(hex,16)
+}
+
+def String convertToHexString(n)
+{
+	String hex = String.format("%X", n.toInteger())
+}
+
+def String convertIPToHexString(ipString)
+{
+	String hex = ipString.tokenize(".").collect {
+    	String.format("%02X", it.toInteger())
+    }.join()
+}
+
+def Boolean canInstallLabs()
+{
+    return hasAllHubsOver("000.011.00603")
+}
+
+def Boolean hasAllHubsOver(String desiredFirmware)
+{
+    return realHubFirmwareVersions.every { fw -> fw >= desiredFirmware }
+}
+
+def List getRealHubFirmwareVersions()
+{
+    return location.hubs*.firmwareVersionString.findAll { it }
+}
+
+
+
+

smartapps/smartthings/ecobee-connect.src/ecobee-connect.groovy

@@ -463,29 +463,33 @@ def pollChildren(child = null) {
 }
 
 // Poll Child is invoked from the Child Device itself as part of the Poll Capability
-def pollChild(child){
+def pollChild(){
 
-	if (pollChildren(child)){
-		if (!child.device.deviceNetworkId.startsWith("ecobee_sensor")){
-			if(atomicState.thermostats[child.device.deviceNetworkId] != null) {
-				def tData = atomicState.thermostats[child.device.deviceNetworkId]
-				log.info "pollChild(child)>> data for ${child.device.deviceNetworkId} : ${tData.data}"
-				child.generateEvent(tData.data) //parse received message from parent
-			} else if(atomicState.thermostats[child.device.deviceNetworkId] == null) {
-				log.error "ERROR: Device connection removed? no data for ${child.device.deviceNetworkId}"
-				return null
+	def devices = getChildDevices()
+
+	if (pollChildren()){
+		devices.each { child ->
+			log.info "***found $child"
+			if (!child.device.deviceNetworkId.startsWith("ecobee_sensor")){
+				if(atomicState.thermostats[child.device.deviceNetworkId] != null) {
+					def tData = atomicState.thermostats[child.device.deviceNetworkId]
+					log.info "pollChild(child)>> data for ${child.device.deviceNetworkId} : ${tData.data}"
+					child.generateEvent(tData.data) //parse received message from parent
+				} else if(atomicState.thermostats[child.device.deviceNetworkId] == null) {
+					log.error "ERROR: Device connection removed? no data for ${child.device.deviceNetworkId}"
+					return null
+				}
 			}
 		}
 	} else {
-		log.info "ERROR: pollChildren(child) for ${child.device.deviceNetworkId} after polling"
+		log.info "ERROR: pollChildren()"
 		return null
 	}
 
 }
 
 void poll() {
-	def devices = getChildDevices()
-	devices.each {pollChild(it)}
+	pollChild()
 }
 
 def availableModes(child) {
@@ -545,10 +549,15 @@ def updateSensorData() {
 				def occupancy = ""
 				it.capability.each {
 					if (it.type == "temperature") {
-						if (location.temperatureScale == "F") {
-							temperature = Math.round(it.value.toDouble() / 10)
+						if (it.value == "unknown") {
+							temperature = "--"
 						} else {
-							temperature = convertFtoC(it.value.toDouble() / 10)
+							if (location.temperatureScale == "F") {
+								temperature = Math.round(it.value.toDouble() / 10)
+							} else {
+								temperature = convertFtoC(it.value.toDouble() / 10)
+							}
+
 						}
 
 					} else if (it.type == "occupancy") {

smartapps/smartthings/hue-connect.src/hue-connect.groovy

@@ -15,7 +15,7 @@
  *  for the specific language governing permissions and limitations under the License.
  *
  */
- 
+
 definition(
 	name: "Hue (Connect)",
 	namespace: "smartthings",
@@ -24,7 +24,7 @@ definition(
 	category: "SmartThings Labs",
 	iconUrl: "https://s3.amazonaws.com/smartapp-icons/Partner/hue.png",
 	iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Partner/hue@2x.png",
-    singleInstance: true
+        //singleInstance: true
 )
 
 preferences {
@@ -58,7 +58,7 @@ def bridgeDiscovery(params=[:])
     	state.bridges = [:]
         state.bridgeRefreshCount = 0
         app.updateSetting("selectedHue", "")
-    }    
+    }
 
 	subscribe(location, null, locationHandler, [filterEvents:false])
 
@@ -130,8 +130,8 @@ def bulbDiscovery() {
 	def bulboptions = bulbsDiscovered() ?: [:]
 	def numFound = bulboptions.size() ?: 0
     if (numFound == 0)
-    	app.updateSetting("selectedBulbs", "") 
-        
+    	app.updateSetting("selectedBulbs", "")
+
 	if((bulbRefreshCount % 5) == 0) {
 		discoverHueBulbs()
 	}
@@ -140,7 +140,7 @@ def bulbDiscovery() {
 		section("Please wait while we discover your Hue Bulbs. Discovery can take five minutes or more, so sit back and relax! Select your device below once discovered.") {
 			input "selectedBulbs", "enum", required:false, title:"Select Hue Bulbs (${numFound} found)", multiple:true, options:bulboptions
 		}
-		section {				
+		section {
 			def title = getBridgeIP() ? "Hue bridge (${getBridgeIP()})" : "Find bridges"
 			href "bridgeDiscovery", title: title, description: "", state: selectedHue ? "complete" : "incomplete", params: [override: true]
 
@@ -246,13 +246,13 @@ def installed() {
 
 def updated() {
 	log.trace "Updated with settings: ${settings}"
-	unsubscribe() 
-    unschedule()    
+	unsubscribe()
+    unschedule()
 	initialize()
 }
 
 def initialize() {
-	log.debug "Initializing"  
+	log.debug "Initializing"
     unsubscribe(bridge)
     state.inBulbDiscovery = false
     state.bridgeRefreshCount = 0
@@ -281,18 +281,18 @@ def uninstalled(){
 def bulbListHandler(hub, data = "") {
 	def msg = "Bulbs list not processed. Only while in settings menu."
     def bulbs = [:]
-	if (state.inBulbDiscovery) {       
+	if (state.inBulbDiscovery) {
         def logg = ""
         log.trace "Adding bulbs to state..."
         state.bridgeProcessedLightList = true
-        def object = new groovy.json.JsonSlurper().parseText(data)   
+        def object = new groovy.json.JsonSlurper().parseText(data)
         object.each { k,v ->
-            if (v instanceof Map) 
+            if (v instanceof Map)
                 bulbs[k] = [id: k, name: v.name, type: v.type, hub:hub]
         }
-    }  
+    }
     def bridge = null
-	if (selectedHue) 
+	if (selectedHue)
         bridge = getChildDevice(selectedHue)
     bridge.sendEvent(name: "bulbList", value: hub, data: bulbs, isStateChange: true, displayed: false)
     msg = "${bulbs.size()} bulbs found. ${bulbs}"
@@ -318,7 +318,7 @@ def addBulbs() {
                 } else {
                 	log.debug "$dni in not longer paired to the Hue Bridge or ID changed"
                 }
-			} else { 
+			} else {
             	//backwards compatable
 				newHueBulb = bulbs.find { (app.id + "/" + it.id) == dni }
 				d = addChildDevice("smartthings", "Hue Bulb", dni, newHueBulb?.hub, ["label":newHueBulb?.name])
@@ -344,7 +344,7 @@ def addBridge() {
 		def d = getChildDevice(selectedHue)
 		if(!d) {
      		// compatibility with old devices
-            def newbridge = true 
+            def newbridge = true
             childDevices.each {
             	if (it.getDeviceDataByName("mac")) {
                     def newDNI = "${it.getDeviceDataByName("mac")}"
@@ -354,10 +354,10 @@ def addBridge() {
                         it.setDeviceNetworkId("${newDNI}")
                         if (oldDNI == selectedHue)
                         	app.updateSetting("selectedHue", newDNI)
-                        newbridge = false 
+                        newbridge = false
                     }
-                }    
-            }  
+                }
+            }
         	if (newbridge) {
 				d = addChildDevice("smartthings", "Hue Bridge", selectedHue, vbridge.value.hub)
  				log.debug "created ${d.displayName} with id ${d.deviceNetworkId}"
@@ -368,13 +368,13 @@ def addBridge() {
                     	childDevice.sendEvent(name: "networkAddress", value: vbridge.value.ip + ":" +  vbridge.value.port)
                         childDevice.updateDataValue("networkAddress", vbridge.value.ip + ":" +  vbridge.value.port)
                     } else {
-                    	childDevice.sendEvent(name: "networkAddress", value: convertHexToIP(vbridge.value.ip) + ":" +  convertHexToInt(vbridge.value.port))	
+                    	childDevice.sendEvent(name: "networkAddress", value: convertHexToIP(vbridge.value.ip) + ":" +  convertHexToInt(vbridge.value.port))
                         childDevice.updateDataValue("networkAddress", convertHexToIP(vbridge.value.ip) + ":" +  convertHexToInt(vbridge.value.port))
-                    }    
+                    }
 				} else {
 					childDevice.sendEvent(name: "networkAddress", value: convertHexToIP(vbridge.value.networkAddress) + ":" +  convertHexToInt(vbridge.value.deviceAddress))
                     childDevice.updateDataValue("networkAddress", convertHexToIP(vbridge.value.networkAddress) + ":" +  convertHexToInt(vbridge.value.deviceAddress))
-                }    
+                }
 			}
 		} else {
 			log.debug "found ${d.displayName} with id $selectedHue already exists"
@@ -436,7 +436,7 @@ def locationHandler(evt) {
                     dstate.name = "Philips hue ($ip)"
                     d.sendEvent(name:"networkAddress", value: host)
                     d.updateDataValue("networkAddress", host)
-            	} 
+            	}
             }
 		}
 	}
@@ -504,11 +504,11 @@ def isValidSource(macAddress) {
 /////////////////////////////////////
 
 def parse(childDevice, description) {
-	def parsedEvent = parseLanMessage(description) 
+	def parsedEvent = parseLanMessage(description)
 	if (parsedEvent.headers && parsedEvent.body) {
 		def headerString = parsedEvent.headers.toString()
         def bodyString = parsedEvent.body.toString()
-		if (headerString?.contains("json")) { 
+		if (headerString?.contains("json")) {
         	def body
         	try {
             	body = new groovy.json.JsonSlurper().parseText(bodyString)
@@ -516,11 +516,11 @@ def parse(childDevice, description) {
             	log.warn "Parsing Body failed - trying again..."
                 poll()
             }
-            if (body instanceof java.util.HashMap) { 
+            if (body instanceof java.util.HashMap) {
             	//poll response
                 def bulbs = getChildDevices()
                 for (bulb in body) {
-                    def d = bulbs.find{it.deviceNetworkId == "${app.id}/${bulb.key}"}    
+                    def d = bulbs.find{it.deviceNetworkId == "${app.id}/${bulb.key}"}
                     if (d) {
                         if (bulb.value.state?.reachable) {
                             sendEvent(d.deviceNetworkId, [name: "switch", value: bulb.value?.state?.on ? "on" : "off"])
@@ -535,18 +535,18 @@ def parse(childDevice, description) {
                             }
                         } else {
                             sendEvent(d.deviceNetworkId, [name: "switch", value: "off"])
-                            sendEvent(d.deviceNetworkId, [name: "level", value: 100])                     
+                            sendEvent(d.deviceNetworkId, [name: "level", value: 100])
                             if (bulb.value.state.sat) {
                                 def hue = 23
                                 def sat = 56
                                 def hex = colorUtil.hslToHex(23, 56)
                                 sendEvent(d.deviceNetworkId, [name: "color", value: hex])
                                 sendEvent(d.deviceNetworkId, [name: "hue", value: hue])
-                                sendEvent(d.deviceNetworkId, [name: "saturation", value: sat])                               
-                            }    
+                                sendEvent(d.deviceNetworkId, [name: "saturation", value: sat])
+                            }
                         }
                     }
-                }     
+                }
             }
             else
             { //put response
@@ -595,7 +595,7 @@ def parse(childDevice, description) {
                 }
 
             }
-    	}        
+    	}
 	} else {
 		log.debug "parse - got something other than headers,body..."
 		return []
@@ -616,7 +616,7 @@ def off(childDevice) {
 
 def setLevel(childDevice, percent) {
 	log.debug "Executing 'setLevel'"
-    def level 
+    def level
     if (percent == 1) level = 1 else level = Math.min(Math.round(percent * 255 / 100), 255)
 	put("lights/${getId(childDevice)}/state", [bri: level, on: percent > 0])
 }
@@ -633,6 +633,14 @@ def setHue(childDevice, percent) {
 	put("lights/${getId(childDevice)}/state", [hue: level])
 }
 
+def setColorTemperature(childDevice, huesettings) {
+	log.debug "Executing 'setColorTemperature($huesettings)'"
+	def ct = Math.round(Math.abs((huesettings / 12.96829971181556) - 654))
+	def value = [ct: ct, on: true]
+	log.trace "sending command $value"
+	put("lights/${getId(childDevice)}/state", value)
+}
+
 def setColor(childDevice, huesettings) {
 	log.debug "Executing 'setColor($huesettings)'"
 	def hue = Math.min(Math.round(huesettings.hue * 65535 / 100), 65535)
@@ -689,7 +697,7 @@ HOST: ${host}
 }
 
 private put(path, body) {
-	def host = getBridgeIP()	
+	def host = getBridgeIP()
 	def uri = "/api/${state.username}/$path"
 	def bodyJSON = new groovy.json.JsonBuilder(body).toString()
 	def length = bodyJSON.getBytes().size().toString()
@@ -715,11 +723,11 @@ private getBridgeIP() {
             	host =  d.getDeviceDataByName("networkAddress")
             else
         		host = d.latestState('networkAddress').stringValue
-        }    
+        }
         if (host == null || host == "") {
             def serialNumber = selectedHue
             def bridge = getHueBridges().find { it?.value?.serialNumber?.equalsIgnoreCase(serialNumber) }?.value
-            if (!bridge) { 
+            if (!bridge) {
             	bridge = getHueBridges().find { it?.value?.mac?.equalsIgnoreCase(serialNumber) }?.value
             }
             if (bridge?.ip && bridge?.port) {
@@ -729,9 +737,9 @@ private getBridgeIP() {
                 	host = "${convertHexToIP(bridge?.ip)}:${convertHexToInt(bridge?.port)}"
             } else if (bridge?.networkAddress && bridge?.deviceAddress)
             	host = "${convertHexToIP(bridge?.networkAddress)}:${convertHexToInt(bridge?.deviceAddress)}"
-        }    
+        }
         log.trace "Bridge: $selectedHue - Host: $host"
-    }    
+    }
     return host
 }
 

smartapps/smartthings/notify-me-when.src/i18n/messages.properties

@@ -1,31 +1,31 @@
-'''Acceleration Detected'''.ko=가속화 감지됨
-'''Arrival Of'''.ko=도착
-'''Both Push and SMS?'''.ko=푸시 메시지와 SMS를 모두 사용하시겠습니까?
-'''Button Pushed'''.ko=버튼이 눌렸습니다
-'''Contact Closes'''.ko=접점 닫힘
-'''Contact Opens'''.ko=접점 열림
-'''Departure Of'''.ko=출발
+'''Acceleration Detected'''.ko=가속이 감지되었을 때
+'''Arrival Of'''.ko=도착했을 때
+'''Both Push and SMS?'''.ko=푸시 알람과 SMS 모두 사용
+'''Button Pushed'''.ko=버튼이 눌렸을 때
+'''Contact Closes'''.ko=닫힘이 감지되었을 때
+'''Contact Opens'''.ko=열림이 감지되었을 때
+'''Departure Of'''.ko=출발할 때
 '''Message Text'''.ko=문자 메시지
-'''Minutes'''.ko=분
-'''Motion Here'''.ko=동작
-'''Phone Number (for SMS, optional)'''.ko=휴대전화 번호(문자 메시지 - 옵션)
+'''Minutes'''.ko=메시지 전송 간격(분)
+'''Motion Here'''.ko=움직임이 감지되었을 때
+'''Phone Number (for SMS, optional)'''.ko=전화번호 (옵션)
 '''Receive notifications when anything happens in your home.'''.ko=집 안에 무슨 일이 일어나면 알림이 전송됩니다.
-'''Smoke Detected'''.ko=연기가 감지되었습니다
-'''Switch Turned Off'''.ko=스위치 꺼짐
-'''Switch Turned On'''.ko=스위치 꺼짐
-'''Choose one or more, when...'''.ko=다음의 경우 하나 이상 선택
+'''Smoke Detected'''.ko=연기가 감지되었을 때
+'''Switch Turned Off'''.ko=스위치가 꺼졌을 때
+'''Switch Turned On'''.ko=스위치가 켜졌을 때
+'''Choose one or more, when...'''.ko=다음 상황 중 하나 이상 선택
 '''Yes'''.ko=예
 '''No'''.ko=아니요
-'''Send this message (optional, sends standard status message if not specified)'''.ko=이 메시지 전송(선택적, 지정되지 않은 경우 표준 상태 메시지를 보냅니다)
-'''Via a push notification and/or an SMS message'''.ko=푸시 알림 및/또는 문자 메시지를 통해
-'''Set for specific mode(s)'''.ko=특정 모드 설정
+'''Send this message (optional, sends standard status message if not specified)'''.ko=메시지 작성 (작성하지 않을 경우 디폴트 메시지 전송)
+'''Via a push notification and/or an SMS message'''.ko=푸시 알람 및 SMS 설정
+'''Set for specific mode(s)'''.ko=특정 상태 설정
 '''Tap to set'''.ko=눌러서 설정
-'''Minimum time between messages (optional, defaults to every message)'''.ko=메시지작 간 최소 시간(선택 사항, 모든 메시지의 기본 설정)
-'''If outside the US please make sure to enter the proper country code'''.ko=미국 이외 거주자는 적절한 국가 코드를 입력했는지 확인하십시오
-'''Water Sensor Wet'''.ko=Water Sensor에서 물이 감지되었습니다
+'''Minimum time between messages (optional, defaults to every message)'''.ko=메시지 전송 간격 설정
+'''If outside the US please make sure to enter the proper country code'''.ko=미국 이외 국가에 거주한다면 국가 코드와 함께 입력하여 주세요.
+'''Water Sensor Wet'''.ko=누수가 감지되었을 때
 '''{{ triggerEvent.linkText }} has arrived at the {{ location.name }}'''.ko={{ triggerEvent.linkText }}님이 {{ location.name }}에 도착했습니다
 '''{{ triggerEvent.linkText }} has arrived at {{ location.name }}'''.ko={{ triggerEvent.linkText }}님이 {{ location.name }}에 도착했습니다
 '''{{ triggerEvent.linkText }} has left the {{ location.name }}'''.ko={{ triggerEvent.linkText }}님이 {{ location.name }}을(를) 떠났습니다
 '''{{ triggerEvent.linkText }} has left {{ location.name }}'''.ko={{ triggerEvent.linkText }}님이 {{ location.name }}을(를) 떠났습니다
-'''Assign a name'''.ko=이름 배정
-'''Choose Modes'''.ko=모드 선택
+'''Assign a name'''.ko=이름 설정
+'''Choose Modes'''.ko=상태 선택

smartapps/smartthings/smart-timer.src/smart-timer.groovy

@@ -0,0 +1,62 @@
+/**
+ *  Copyright 2015 SmartThings
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
+ *  in compliance with the License. You may obtain a copy of the License at:
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
+ *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
+ *  for the specific language governing permissions and limitations under the License.
+ *
+ *  CoolDeep
+ *
+ *  Author: CoolDeep
+ */
+
+definition(
+    name: "Smart Timer",
+    namespace: "smartthings",
+    author: "CoolDeep",
+    description: "If a light/device is already on, leave it on. Else, if a light/device switches on on a trigger, switch off in a given time",
+    category: "My Apps",
+    iconUrl: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience.png",
+    iconX2Url: "https://s3.amazonaws.com/smartapp-icons/Convenience/Cat-Convenience%402x.png"
+)
+
+preferences {
+	section("When a sesonsor triggers(turns on)...") {
+		input "mySwitch", "capability.switch", title: "Switches", multiple: true, required: true
+        input "mySensor", "capability.contactSensor", title: "Sensors", multiple: true, required: true
+	}
+    section("Turn it off after how many minutes?") {
+		input "minutesLater", "decimal", title: "When?"
+	}
+}
+
+def installed() {
+	log.debug "Installed with settings: ${settings}"
+	subscribe(mySensor, "contact.opened", myHandler)
+}
+
+def updated() {
+	log.debug "Updated with settings: ${settings}"
+	unsubscribe()
+	subscribe(mySensor, "contact.open", myHandler)
+}
+    
+def myHandler(evt) {
+	def lightVal = mySwitch.currentSwitch
+    log.debug ">> TheSwitch current value turned ${lightVal}"
+   
+  	if (lightVal.contains("off")) {
+    	def delay = minutesLater * 60
+    	log.debug ">>> Turning off in ${minutesLater} minutes (${delay}seconds)"
+    	runIn(delay, turnOffSwitch)
+    }
+}
+
+def turnOffSwitch() {
+	mySwitch.off()
+}